You are not logged in.
I don't understand what's going wrong here, so I hope someone can help me.
I have created an .ISO image (of a video) using DVDstyler.
(1) DVDstyler will burn it to a DVD-RW without any problems.
(2) I can burn it from the command line (growisofs etc.)
(3) I can burn it to a DVD-R from any application (DVDstyler, K3b, Brasero)
K3B and Brasero will write data to a DVD-RW any without problems
But, when I try to burn the dvd.iso to a DVD-RW disc with either k3b or Brasero, they fail with various error messages.
For example, K3B's debugging output is as follows
Devices
-----------------------
TSSTcorp DVD-ROM TS-H352C DE06 (/dev/sr1, CD-ROM, DVD-ROM) [DVD-ROM, CD-ROM] [None] [%7]
_NEC DVD_RW ND-4550A 1.09 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite] [%7]
System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.7.3 (4.7.3)
QT Version: 4.7.4
Kernel: 3.1.2-1-ARCH
Used versions
-----------------------
cdrecord: 3.1a06
cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Cdrecord-ProDVD-ProBD-Clone 3.01a06 (i686-pc-linux-gnu) Copyright (C) 1995-2011 Joerg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.9'.
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-4550A '
Revision : '1.09'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD-RW restricted overwrite
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-R/DL sequential recording
Profile: DVD-RW sequential recording (current)
Profile: DVD-RW restricted overwrite (current)
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1769472 = 1728 KB
FIFO size : 4194304 = 4096 KB
cdrecord: Drive needs to reload the media to return to proper status.
cdrecord: Data does not fit on current disk.
Track 01: data 1854 MB
Total size: 1854 MB = 949353 sectors
Current Secsize: 2048
Trying to clear drive status.
WARNING: Phys disk size 65264 differs from rzone size 0! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 261871
WARNING: Drive returns zero media size. Using media size from ADIP.
Blocks total: 65264 Blocks current: 65264 Blocks remaining: -884089
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=2 -sao -data -tsize=949353s -
I hope this is enough to give some clues. BTW, I have tried forcing a re-format on the disc first from within the application, which reports success. It all used to work some months ago, but since I do not do this regularly, I can't identify exactly when the problem started.
I would really appreciate some guidance.
Many thanks in advance
Offline
Optional Deps : dvd+rw-tools: for dvd burning support
Do you have this ?
O' rly ? Ya rly Oo
Offline
Yes - sorry I should have include that in my post.
Offline
i think it have promlem with this disk.
maybe you have to format it.
ezik
Offline
He already stated thet he is re-formated teh disk
@myrlin
as far as i can see, problem is with
cdrecord: Data does not fit on current disk.
try to reduce data for burning.
Aslo check that your user belongs to optical group aka "id USER"
Last edited by cybertorture (2011-11-30 18:13:28)
O' rly ? Ya rly Oo
Offline
I've done some more tests, and it seems that the formatting carried out by the applications is not working properly.
If I re-format from the command line using
dvd+rw-format -blank=full /dev/sr0
all applications write correctly.
So, I seem to have found a reasonable work-around, but not a true solution.
Many thanks to everyone for your help.
Offline