You are not logged in.
- Topics: Active | Unanswered
#1 2011-12-02 09:37:26
- jair
- Member
- Registered: 2011-12-02
- Posts: 9
[SOLVED] I can not start Gnome3
Hello, I just installed Arch on a Core 2 Duo with Intel graphics card, but when installing Gnome and start the command startx gives the following errors:
X.Org X Server 1.11.2
Release Date: 2011-11-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.1.1-1-ARCH i686
Current Operating System: Linux Ardilla 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 20:24:07 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sdb1
Build Date: 16 November 2011 11:26:40AM
Current version of pixman: 0.24.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 29 16:21:20 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) Failed to load module "fbdev" (module does not exist, 0)
gnome-session[1087]: GLib-WARNING: XDG_RUNTIME_DIR variable not set. Falling back to XDG cache dir.
gnome-session[1087]: libupower-glib-WARNING: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
gnome-session[1087]: WARNING: Could not connect to ConsoleKit: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
gnome-session[1087]: WARNING: Could not connect to ConsoleKit: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
GNOME_KEYRING_CONTROL=/tmp/keyring-IcJnYt
GNOME_KEYRING_PID=1100
(gnome-settings-daemon:1097): GLib-WARNING **: XDG_RUNTIME_DIR variable not set. Falling back to XDG cache dir.
** (gnome-settings-daemon:1097): WARNING **: /usr/lib/gnome-settings-daemon-3.0/libcolor.so: undefined symbol: g_settings_get_uint
** (gnome-settings-daemon:1097): WARNING **: Cannot load plugin 'Color' since file '/usr/lib/gnome-settings-daemon-3.0/libcolor.so' cannot be read.
** (gnome-settings-daemon:1097): WARNING **: Error activating plugin 'Color'
(gnome-settings-daemon:1097): libupower-glib-WARNING **: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
GNOME_KEYRING_CONTROL=/tmp/keyring-IcJnYt
GNOME_KEYRING_CONTROL=/tmp/keyring-IcJnYt
SSH_AUTH_SOCK=/tmp/keyring-IcJnYt/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-IcJnYt
SSH_AUTH_SOCK=/tmp/keyring-IcJnYt/ssh
GPG_AGENT_INFO=/tmp/keyring-IcJnYt/gpg:0:1
gnome-session[1087]: WARNING: Application 'gnome-settings-daemon.desktop' killed by signal
(gnome-shell:1124): GLib-WARNING **: XDG_RUNTIME_DIR variable not set. Falling back to XDG cache dir.
Window manager warning: 0 stored in GConf key /desktop/gnome/peripherals/mouse/cursor_size is out of range 1 to 128
gnome-session[1087]: WARNING: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process /usr/lib/dconf/dconf-service exited with status 127
(gnome-screensaver:1139): GLib-WARNING **: XDG_RUNTIME_DIR variable not set. Falling back to XDG cache dir.
JS ERROR: !!! Exception was: Error: Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv
JS ERROR: !!! lineNumber = '0'
JS ERROR: !!! fileName = '"gjs_throw"'
JS ERROR: !!! stack = '"("Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv")@gjs_throw:0
_init()@/usr/share/gjs-1.0/overrides/GLib.js:243
@/usr/share/gnome-shell/js/ui/environment.js:3
"'
JS ERROR: !!! message = '"Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv"'
JS ERROR: !!! Exception was: Error: Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv
JS ERROR: !!! lineNumber = '0'
JS ERROR: !!! fileName = '"gjs_throw"'
JS ERROR: !!! stack = '"("Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv")@gjs_throw:0
_init()@/usr/share/gjs-1.0/overrides/GLib.js:243
@/usr/share/gnome-shell/js/ui/environment.js:3
"'
JS ERROR: !!! message = '"Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv"'
Window manager warning: Log level 32: Execution of main.js threw exception: Error: Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv
** (nm-applet:1140): WARNING **: Failed to initialize D-Bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
(gnome-shell:1149): GLib-WARNING **: XDG_RUNTIME_DIR variable not set. Falling back to XDG cache dir.
E: [pulseaudio] main.c: Daemon startup failed.
Failed to play sound: Not available
Window manager warning: 0 stored in GConf key /desktop/gnome/peripherals/mouse/cursor_size is out of range 1 to 128
JS ERROR: !!! Exception was: Error: Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv
JS ERROR: !!! lineNumber = '0'
JS ERROR: !!! fileName = '"gjs_throw"'
JS ERROR: !!! stack = '"("Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv")@gjs_throw:0
_init()@/usr/share/gjs-1.0/overrides/GLib.js:243
@/usr/share/gnome-shell/js/ui/environment.js:3
"'
JS ERROR: !!! message = '"Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv"'
JS ERROR: !!! Exception was: Error: Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv
JS ERROR: !!! lineNumber = '0'
JS ERROR: !!! fileName = '"gjs_throw"'
JS ERROR: !!! stack = '"("Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv")@gjs_throw:0
_init()@/usr/share/gjs-1.0/overrides/GLib.js:243
@/usr/share/gnome-shell/js/ui/environment.js:3
"'
JS ERROR: !!! message = '"Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv"'
Window manager warning: Log level 32: Execution of main.js threw exception: Error: Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv
gnome-session[1087]: WARNING: App 'gnome-shell.desktop' respawning too quickly
gnome-session[1087]: WARNING: Could not connect to ConsoleKit: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
gnome-session[1087]: WARNING: Could not connect to ConsoleKit: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
xinit: connection to X server lost
waiting for X server to shut down Server terminated successfully (0). Closing log file.In this test, did not have dbus installed but after installing it, the errors still persist. I've tried both the i686 version and in the arch x86_64. What I can do?
Note: it happens even with fuse and dbus in /etc/rc.conf
Last edited by jair (2011-12-07 20:57:41)
Offline
#2 2011-12-02 09:43:49
- Mavirick
- Member
- Registered: 2011-12-01
- Posts: 62
Re: [SOLVED] I can not start Gnome3
Noticed you are running a older kernel so wondering if you have run pacman -Syyu and have all the latest packages installed.
Which intel driver version are you running?
Offline
#3 2011-12-02 09:45:53
- wonder
- Developer
- From: Bucharest, Romania
- Registered: 2006-07-05
- Posts: 5,941
- Website
Re: [SOLVED] I can not start Gnome3
from start you do not start dbus
gnome-session[1087]: libupower-glib-WARNING: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
Give what you have. To someone, it may be better than you dare to think.
Offline
#4 2011-12-02 12:27:00
- jair
- Member
- Registered: 2011-12-02
- Posts: 9
Re: [SOLVED] I can not start Gnome3
Mavirick wrote:
Noticed you are running a older kernel so wondering if you have run pacman -Syyu and have all the latest packages installed.
Which intel driver version are you running?
Yes, but pacman -Q tells me I have the version 3.1.4-1:
pacman -Q linux
linux 3.1.4-1The package name is: xf86-video-intel-2.17.0-1
Offline
#5 2011-12-02 12:53:36
- jair
- Member
- Registered: 2011-12-02
- Posts: 9
Re: [SOLVED] I can not start Gnome3
wonder wrote:
from start you do not start dbus
gnome-session[1087]: libupower-glib-WARNING: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
Yes, that line disappeared when I installed dbus.
Offline
#6 2011-12-02 13:03:29
- Mavirick
- Member
- Registered: 2011-12-01
- Posts: 62
Re: [SOLVED] I can not start Gnome3
The output you have showing is trying to load fbdev and since you don't have those drivers installed it cannot find it so it gives that error. Have you created an xorg.conf to load the correct Intel driver?
Offline
#7 2011-12-02 13:09:40
- wonder
- Developer
- From: Bucharest, Romania
- Registered: 2006-07-05
- Posts: 5,941
- Website
Re: [SOLVED] I can not start Gnome3
jair wrote:
wonder wrote:from start you do not start dbus
gnome-session[1087]: libupower-glib-WARNING: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
Yes, that line disappeared when I installed dbus.
is not enough to have it installed.
/etc/rc.d/dbus start
Give what you have. To someone, it may be better than you dare to think.
Offline
#8 2011-12-02 14:19:12
- jair
- Member
- Registered: 2011-12-02
- Posts: 9
Re: [SOLVED] I can not start Gnome3
wonder wrote:
jair wrote:wonder wrote:from start you do not start dbus
gnome-session[1087]: libupower-glib-WARNING: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
Yes, that line disappeared when I installed dbus.
is not enough to have it installed.
/etc/rc.d/dbus start
output:
#/etc/rc.d/dbus start
:: Starting D-BUS system messagebus
Failed to start message bus: The pid file "/var/run/dbus.pid" exists, if the message bus is not running, remove this file.Offline
#9 2011-12-02 14:23:27
- jair
- Member
- Registered: 2011-12-02
- Posts: 9
Re: [SOLVED] I can not start Gnome3
Mavirick wrote:
The output you have showing is trying to load fbdev and since you don't have those drivers installed it cannot find it so it gives that error. Have you created an xorg.conf to load the correct Intel driver?
I have no such file, but I read Xorg and says:
Note: This step is OPTIONAL and should not be done unless you know what you are doing.
This step is NOT OPTIONAL if using dual monitors or the nouveau driver. See Nouveau#Configuration.
I have a monitor. It should not be necessary.
After installing fbdev, Gnome starts, but it says:
"Oh no!, something has Gnome wrong"
and all I can do is logout. The line that you say disappeared.
Offline
#10 2011-12-02 14:30:38
- lifeafter2am
- Member
- From: 127.0.0.1
- Registered: 2009-06-10
- Posts: 1,332
Re: [SOLVED] I can not start Gnome3
What does your .xinitrc look like? Have you tried starting another WM? Any particular reason your not using the xf86-video-intel module?
#binarii @ irc.binarii.net
Matrix Server: https://matrix.binarii.net
-------------
Allan -> ArchBang is not supported because it is stupid.
Offline
#11 2011-12-02 15:09:06
- jair
- Member
- Registered: 2011-12-02
- Posts: 9
Re: [SOLVED] I can not start Gnome3
lifeafter2am wrote:
What does your .xinitrc look like? Have you tried starting another WM? Any particular reason your not using the xf86-video-intel module?
.xinitrx:
exec ck-launch-session gnome-sessionI have not tried another WM.
I use the xf86-video-intel module. Without this module, I can not run the default X environment.
Offline
#12 2011-12-02 15:10:31
- wonder
- Developer
- From: Bucharest, Romania
- Registered: 2006-07-05
- Posts: 5,941
- Website
Re: [SOLVED] I can not start Gnome3
can you post a new up to date log?
Give what you have. To someone, it may be better than you dare to think.
Offline
#13 2011-12-02 15:13:25
- lifeafter2am
- Member
- From: 127.0.0.1
- Registered: 2009-06-10
- Posts: 1,332
Re: [SOLVED] I can not start Gnome3
Are there no new error messages since Gnome starts now? Nothing in dmesg, XOrg log, or Gnome logs (I don't even know if gnome has logs tbh)?
**edit** Wonder beat me to it! 
Last edited by lifeafter2am (2011-12-02 15:14:07)
#binarii @ irc.binarii.net
Matrix Server: https://matrix.binarii.net
-------------
Allan -> ArchBang is not supported because it is stupid.
Offline
#14 2011-12-02 15:52:10
- jair
- Member
- Registered: 2011-12-02
- Posts: 9
Re: [SOLVED] I can not start Gnome3
Xorg.0.long:
[ 56.186]
X.Org X Server 1.11.2
Release Date: 2011-11-04
[ 56.186] X Protocol Version 11, Revision 0
[ 56.186] Build Operating System: Linux 3.1.1-1-ARCH i686
[ 56.186] Current Operating System: Linux Ardilla 3.1.4-1-ARCH #1 SMP PREEMPT Tue Nov 29 09:08:04 UTC 2011 i686
[ 56.186] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sdb1
[ 56.186] Build Date: 16 November 2011 11:26:40AM
[ 56.186]
[ 56.186] Current version of pixman: 0.24.0
[ 56.186] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 56.186] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 56.186] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 2 06:16:59 2011
[ 56.195] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 56.197] (==) No Layout section. Using the first Screen section.
[ 56.197] (==) No screen section available. Using defaults.
[ 56.197] (**) |-->Screen "Default Screen Section" (0)
[ 56.197] (**) | |-->Monitor "<default monitor>"
[ 56.201] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 56.201] (==) Automatically adding devices
[ 56.201] (==) Automatically enabling devices
[ 56.212] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 56.212] Entry deleted from font path.
[ 56.213] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 56.213] Entry deleted from font path.
[ 56.213] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 56.213] Entry deleted from font path.
[ 56.217] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 56.217] Entry deleted from font path.
[ 56.217] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 56.218] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 56.218] Entry deleted from font path.
[ 56.218] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 56.218] (==) FontPath set to:
/usr/share/fonts/misc/
[ 56.218] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 56.218] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 56.219] (II) Loader magic: 0x8228580
[ 56.219] (II) Module ABI versions:
[ 56.219] X.Org ANSI C Emulation: 0.4
[ 56.219] X.Org Video Driver: 11.0
[ 56.219] X.Org XInput driver : 13.0
[ 56.219] X.Org Server Extension : 6.0
[ 56.220] (--) PCI:*(0:0:2:0) 8086:29c2:105b:0df2 rev 16, Mem @ 0xfdf00000/524288, 0xd0000000/268435456, 0xfde00000/1048576, I/O @ 0x0000ff00/8
[ 56.220] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 56.220] (II) LoadModule: "extmod"
[ 56.228] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 56.232] (II) Module extmod: vendor="X.Org Foundation"
[ 56.232] compiled for 1.11.2, module version = 1.0.0
[ 56.232] Module class: X.Org Server Extension
[ 56.232] ABI class: X.Org Server Extension, version 6.0
[ 56.232] (II) Loading extension MIT-SCREEN-SAVER
[ 56.232] (II) Loading extension XFree86-VidModeExtension
[ 56.232] (II) Loading extension XFree86-DGA
[ 56.233] (II) Loading extension DPMS
[ 56.233] (II) Loading extension XVideo
[ 56.233] (II) Loading extension XVideo-MotionCompensation
[ 56.233] (II) Loading extension X-Resource
[ 56.233] (II) LoadModule: "dbe"
[ 56.233] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 56.236] (II) Module dbe: vendor="X.Org Foundation"
[ 56.236] compiled for 1.11.2, module version = 1.0.0
[ 56.236] Module class: X.Org Server Extension
[ 56.236] ABI class: X.Org Server Extension, version 6.0
[ 56.236] (II) Loading extension DOUBLE-BUFFER
[ 56.236] (II) LoadModule: "glx"
[ 56.236] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 56.252] (II) Module glx: vendor="X.Org Foundation"
[ 56.252] compiled for 1.11.2, module version = 1.0.0
[ 56.252] ABI class: X.Org Server Extension, version 6.0
[ 56.252] (==) AIGLX enabled
[ 56.252] (II) Loading extension GLX
[ 56.252] (II) LoadModule: "record"
[ 56.252] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 56.254] (II) Module record: vendor="X.Org Foundation"
[ 56.254] compiled for 1.11.2, module version = 1.13.0
[ 56.254] Module class: X.Org Server Extension
[ 56.254] ABI class: X.Org Server Extension, version 6.0
[ 56.254] (II) Loading extension RECORD
[ 56.254] (II) LoadModule: "dri"
[ 56.255] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 56.260] (II) Module dri: vendor="X.Org Foundation"
[ 56.260] compiled for 1.11.2, module version = 1.0.0
[ 56.260] ABI class: X.Org Server Extension, version 6.0
[ 56.260] (II) Loading extension XFree86-DRI
[ 56.260] (II) LoadModule: "dri2"
[ 56.260] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 56.263] (II) Module dri2: vendor="X.Org Foundation"
[ 56.263] compiled for 1.11.2, module version = 1.2.0
[ 56.263] ABI class: X.Org Server Extension, version 6.0
[ 56.263] (II) Loading extension DRI2
[ 56.263] (==) Matched intel as autoconfigured driver 0
[ 56.263] (==) Matched vesa as autoconfigured driver 1
[ 56.263] (==) Matched fbdev as autoconfigured driver 2
[ 56.263] (==) Assigned the driver to the xf86ConfigLayout
[ 56.263] (II) LoadModule: "intel"
[ 56.263] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 56.277] (II) Module intel: vendor="X.Org Foundation"
[ 56.278] compiled for 1.11.2, module version = 2.17.0
[ 56.278] Module class: X.Org Video Driver
[ 56.278] ABI class: X.Org Video Driver, version 11.0
[ 56.278] (II) LoadModule: "vesa"
[ 56.278] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 56.280] (II) Module vesa: vendor="X.Org Foundation"
[ 56.280] compiled for 1.11.1, module version = 2.3.0
[ 56.280] Module class: X.Org Video Driver
[ 56.280] ABI class: X.Org Video Driver, version 11.0
[ 56.280] (II) LoadModule: "fbdev"
[ 56.281] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 56.283] (II) Module fbdev: vendor="X.Org Foundation"
[ 56.283] compiled for 1.10.99.902, module version = 0.4.2
[ 56.283] ABI class: X.Org Video Driver, version 11.0
[ 56.283] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 56.283] (II) VESA: driver for VESA chipsets: vesa
[ 56.283] (II) FBDEV: driver for framebuffer: fbdev
[ 56.283] (--) using VT number 7
[ 56.290] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 56.290] (WW) Falling back to old probe method for vesa
[ 56.290] (WW) Falling back to old probe method for fbdev
[ 56.295] (II) Loading sub module "fbdevhw"
[ 56.295] (II) LoadModule: "fbdevhw"
[ 56.295] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 56.297] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 56.297] compiled for 1.11.2, module version = 0.0.2
[ 56.297] ABI class: X.Org Video Driver, version 11.0
[ 56.297] drmOpenDevice: node name is /dev/dri/card0
[ 56.297] drmOpenDevice: open result is 8, (OK)
[ 56.297] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 56.297] drmOpenDevice: node name is /dev/dri/card0
[ 56.297] drmOpenDevice: open result is 8, (OK)
[ 56.297] drmOpenByBusid: drmOpenMinor returns 8
[ 56.297] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 56.297] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 56.297] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 56.297] (==) intel(0): RGB weight 888
[ 56.297] (==) intel(0): Default visual is TrueColor
[ 56.297] (II) intel(0): Integrated Graphics Chipset: Intel(R) G33
[ 56.297] (--) intel(0): Chipset: "G33"
[ 56.297] (**) intel(0): Relaxed fencing enabled
[ 56.297] (**) intel(0): Wait on SwapBuffers? enabled
[ 56.297] (**) intel(0): Triple buffering? enabled
[ 56.297] (**) intel(0): Framebuffer tiled
[ 56.297] (**) intel(0): Pixmaps tiled
[ 56.297] (**) intel(0): 3D buffers tiled
[ 56.297] (**) intel(0): SwapBuffers wait enabled
[ 56.297] (==) intel(0): video overlay key set to 0x101fe
[ 56.361] (II) intel(0): Output VGA1 has no monitor section
[ 56.431] (II) intel(0): EDID for output VGA1
[ 56.431] (II) intel(0): Manufacturer: AOC Model: c191 Serial#: 16843009
[ 56.431] (II) intel(0): Year: 2008 Week: 16
[ 56.431] (II) intel(0): EDID Version: 1.3
[ 56.431] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 56.431] (II) intel(0): Sync: Separate
[ 56.431] (II) intel(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 56.431] (II) intel(0): Gamma: 2.20
[ 56.431] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 56.431] (II) intel(0): First detailed timing is preferred mode
[ 56.431] (II) intel(0): redX: 0.640 redY: 0.334 greenX: 0.286 greenY: 0.599
[ 56.431] (II) intel(0): blueX: 0.154 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
[ 56.431] (II) intel(0): Supported established timings:
[ 56.431] (II) intel(0): 720x400@70Hz
[ 56.431] (II) intel(0): 640x480@60Hz
[ 56.431] (II) intel(0): 640x480@67Hz
[ 56.431] (II) intel(0): 640x480@72Hz
[ 56.431] (II) intel(0): 640x480@75Hz
[ 56.431] (II) intel(0): 800x600@56Hz
[ 56.431] (II) intel(0): 800x600@60Hz
[ 56.431] (II) intel(0): 800x600@72Hz
[ 56.431] (II) intel(0): 800x600@75Hz
[ 56.431] (II) intel(0): 832x624@75Hz
[ 56.431] (II) intel(0): 1024x768@60Hz
[ 56.431] (II) intel(0): 1024x768@70Hz
[ 56.431] (II) intel(0): 1024x768@75Hz
[ 56.431] (II) intel(0): 1280x1024@75Hz
[ 56.431] (II) intel(0): 1152x864@75Hz
[ 56.431] (II) intel(0): Manufacturer's mask: 0
[ 56.431] (II) intel(0): Supported standard timings:
[ 56.431] (II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 56.431] (II) intel(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 56.431] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 56.431] (II) intel(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 56.431] (II) intel(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 56.431] (II) intel(0): Supported detailed timing:
[ 56.431] (II) intel(0): clock: 106.5 MHz Image Size: 410 x 257 mm
[ 56.431] (II) intel(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 56.431] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 56.431] (II) intel(0): Serial No: K4084CB011239
[ 56.431] (II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 56.431] (II) intel(0): Monitor name: 919Sw-1
[ 56.431] (II) intel(0): EDID (in hex):
[ 56.431] (II) intel(0): 00ffffffffffff0005e391c101010101
[ 56.431] (II) intel(0): 1012010368291a782ae5b5a355499927
[ 56.431] (II) intel(0): 135054bfef808180714f8140950f9500
[ 56.431] (II) intel(0): 0101010101019a29a0d0518422305098
[ 56.431] (II) intel(0): 36009a011100001c000000ff004b3430
[ 56.431] (II) intel(0): 38344342303131323339000000fd0032
[ 56.431] (II) intel(0): 4c1e530e000a202020202020000000fc
[ 56.431] (II) intel(0): 0039313953772d310a202020202000d0
[ 56.431] (II) intel(0): EDID vendor "AOC", prod id 49553
[ 56.431] (II) intel(0): Using EDID range info for horizontal sync
[ 56.432] (II) intel(0): Using EDID range info for vertical refresh
[ 56.432] (II) intel(0): Printing DDC gathered Modelines:
[ 56.432] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 56.432] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 56.432] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 56.432] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 56.432] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 56.432] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 56.432] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 56.432] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 56.432] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 56.432] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 56.432] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 56.432] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 56.432] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 56.432] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 56.432] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 56.432] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 56.432] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 56.432] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 56.432] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 56.432] (II) intel(0): Printing probed modes for output VGA1
[ 56.432] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 56.432] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 56.432] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 56.432] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 56.432] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 56.432] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 56.432] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 56.432] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 56.432] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 56.432] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 56.432] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 56.432] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 56.432] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 56.432] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 56.432] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 56.432] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 56.432] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 56.432] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 56.432] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 56.432] (II) intel(0): Output VGA1 connected
[ 56.432] (II) intel(0): Using exact sizes for initial modes
[ 56.432] (II) intel(0): Output VGA1 using initial mode 1440x900
[ 56.432] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 56.432] (II) intel(0): Kernel page flipping support detected, enabling
[ 56.432] (**) intel(0): Display dimensions: (410, 260) mm
[ 56.432] (**) intel(0): DPI set to (89, 87)
[ 56.432] (II) Loading sub module "fb"
[ 56.432] (II) LoadModule: "fb"
[ 56.432] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 56.436] (II) Module fb: vendor="X.Org Foundation"
[ 56.436] compiled for 1.11.2, module version = 1.0.0
[ 56.436] ABI class: X.Org ANSI C Emulation, version 0.4
[ 56.436] (II) Loading sub module "dri2"
[ 56.436] (II) LoadModule: "dri2"
[ 56.436] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 56.436] (II) Module dri2: vendor="X.Org Foundation"
[ 56.436] compiled for 1.11.2, module version = 1.2.0
[ 56.436] ABI class: X.Org Server Extension, version 6.0
[ 56.436] (II) UnloadModule: "vesa"
[ 56.436] (II) Unloading vesa
[ 56.436] (II) UnloadModule: "fbdev"
[ 56.436] (II) Unloading fbdev
[ 56.436] (II) UnloadModule: "fbdevhw"
[ 56.436] (II) Unloading fbdevhw
[ 56.436] (==) Depth 24 pixmap format is 32 bpp
[ 56.436] (II) intel(0): [DRI2] Setup complete
[ 56.436] (II) intel(0): [DRI2] DRI driver: i915
[ 56.436] (II) intel(0): Allocated new frame buffer 1472x900 stride 8192, tiled
[ 56.453] (II) UXA(0): Driver registered support for the following operations:
[ 56.453] (II) solid
[ 56.453] (II) copy
[ 56.453] (II) composite (RENDER acceleration)
[ 56.453] (II) put_image
[ 56.453] (II) get_image
[ 56.453] (==) intel(0): Backing store disabled
[ 56.453] (==) intel(0): Silken mouse enabled
[ 56.453] (II) intel(0): Initializing HW Cursor
[ 56.480] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 56.480] (==) intel(0): DPMS enabled
[ 56.480] (==) intel(0): Intel XvMC decoder disabled
[ 56.480] (II) intel(0): Set up textured video
[ 56.480] (II) intel(0): Set up overlay video
[ 56.480] (II) intel(0): direct rendering: DRI2 Enabled
[ 56.480] (==) intel(0): hotplug detection: "enabled"
[ 56.480] (--) RandR disabled
[ 56.480] (II) Initializing built-in extension Generic Event Extension
[ 56.480] (II) Initializing built-in extension SHAPE
[ 56.480] (II) Initializing built-in extension MIT-SHM
[ 56.480] (II) Initializing built-in extension XInputExtension
[ 56.480] (II) Initializing built-in extension XTEST
[ 56.480] (II) Initializing built-in extension BIG-REQUESTS
[ 56.480] (II) Initializing built-in extension SYNC
[ 56.480] (II) Initializing built-in extension XKEYBOARD
[ 56.480] (II) Initializing built-in extension XC-MISC
[ 56.480] (II) Initializing built-in extension SECURITY
[ 56.480] (II) Initializing built-in extension XINERAMA
[ 56.480] (II) Initializing built-in extension XFIXES
[ 56.480] (II) Initializing built-in extension RENDER
[ 56.480] (II) Initializing built-in extension RANDR
[ 56.480] (II) Initializing built-in extension COMPOSITE
[ 56.480] (II) Initializing built-in extension DAMAGE
[ 56.586] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 56.586] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 56.586] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 56.586] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 56.586] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 56.586] (II) AIGLX: Loaded and initialized i915
[ 56.586] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 56.587] (II) intel(0): Setting screen physical size to 380 x 238
[ 56.698] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 56.698] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 56.698] (II) LoadModule: "evdev"
[ 56.698] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 56.701] (II) Module evdev: vendor="X.Org Foundation"
[ 56.701] compiled for 1.10.99.902, module version = 2.6.0
[ 56.701] Module class: X.Org XInput Driver
[ 56.701] ABI class: X.Org XInput driver, version 13.0
[ 56.701] (II) Using input driver 'evdev' for 'Power Button'
[ 56.701] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 56.701] (**) Power Button: always reports core events
[ 56.701] (**) Power Button: Device: "/dev/input/event1"
[ 56.701] (--) Power Button: Found keys
[ 56.701] (II) Power Button: Configuring as keyboard
[ 56.701] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 56.701] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 56.701] (**) Option "xkb_rules" "evdev"
[ 56.701] (**) Option "xkb_model" "evdev"
[ 56.701] (**) Option "xkb_layout" "us"
[ 56.721] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 56.721] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 56.721] (II) Using input driver 'evdev' for 'Power Button'
[ 56.721] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 56.721] (**) Power Button: always reports core events
[ 56.721] (**) Power Button: Device: "/dev/input/event0"
[ 56.721] (--) Power Button: Found keys
[ 56.721] (II) Power Button: Configuring as keyboard
[ 56.721] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 56.721] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 56.721] (**) Option "xkb_rules" "evdev"
[ 56.721] (**) Option "xkb_model" "evdev"
[ 56.721] (**) Option "xkb_layout" "us"
[ 56.721] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event4)
[ 56.721] (II) No input driver/identifier specified (ignoring)
[ 56.721] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 56.721] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 56.721] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 56.721] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 56.721] (**) AT Translated Set 2 keyboard: always reports core events
[ 56.721] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 56.722] (--) AT Translated Set 2 keyboard: Found keys
[ 56.722] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 56.722] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 56.722] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 56.722] (**) Option "xkb_rules" "evdev"
[ 56.722] (**) Option "xkb_model" "evdev"
[ 56.722] (**) Option "xkb_layout" "us"
[ 56.722] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[ 56.722] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 56.722] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 56.722] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 56.722] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 56.722] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
[ 56.722] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 56.722] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 56.722] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
[ 56.722] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 56.722] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 56.722] (II) ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 56.722] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 56.722] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 56.722] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 56.722] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 9)
[ 56.722] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 56.722] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 56.722] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 56.722] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 56.722] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 56.723] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 56.723] (II) No input driver/identifier specified (ignoring)
[ 56.723] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 56.723] (II) No input driver/identifier specified (ignoring)
[ 58.382] (II) intel(0): EDID vendor "AOC", prod id 49553
[ 58.382] (II) intel(0): Using hsync ranges from config file
[ 58.382] (II) intel(0): Using vrefresh ranges from config file
[ 58.382] (II) intel(0): Printing DDC gathered Modelines:
[ 58.382] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 58.382] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 58.382] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 58.382] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 58.382] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 58.382] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 58.382] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 58.382] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 58.382] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 58.382] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 58.382] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 58.382] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 58.382] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 58.382] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 58.382] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 58.382] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 58.382] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 58.382] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 58.382] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 59.201] (II) intel(0): EDID vendor "AOC", prod id 49553
[ 59.201] (II) intel(0): Using hsync ranges from config file
[ 59.201] (II) intel(0): Using vrefresh ranges from config file
[ 59.201] (II) intel(0): Printing DDC gathered Modelines:
[ 59.201] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 59.201] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 59.201] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 59.201] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 59.201] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 59.201] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 59.201] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 59.201] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 59.201] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 59.201] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 59.201] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 59.201] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 59.201] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 59.201] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 59.201] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 59.201] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 59.201] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 59.201] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 59.201] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 59.268] (II) intel(0): EDID vendor "AOC", prod id 49553
[ 59.268] (II) intel(0): Using hsync ranges from config file
[ 59.268] (II) intel(0): Using vrefresh ranges from config file
[ 59.268] (II) intel(0): Printing DDC gathered Modelines:
[ 59.268] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 59.268] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 59.268] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 59.268] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 59.268] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 59.268] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 59.268] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 59.268] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 59.268] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 59.268] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 59.268] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 59.268] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 59.268] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 59.268] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 59.268] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 59.268] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 59.268] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 59.268] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 59.268] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 59.348] (II) intel(0): EDID vendor "AOC", prod id 49553
[ 59.348] (II) intel(0): Using hsync ranges from config file
[ 59.348] (II) intel(0): Using vrefresh ranges from config file
[ 59.348] (II) intel(0): Printing DDC gathered Modelines:
[ 59.348] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 59.348] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 59.348] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 59.348] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 59.348] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 59.348] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 59.348] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 59.348] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 59.348] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 59.348] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 59.348] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 59.348] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 59.348] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 59.348] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 59.348] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 59.348] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 59.348] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 59.348] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 59.348] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 59.418] (II) intel(0): EDID vendor "AOC", prod id 49553
[ 59.418] (II) intel(0): Using hsync ranges from config file
[ 59.418] (II) intel(0): Using vrefresh ranges from config file
[ 59.418] (II) intel(0): Printing DDC gathered Modelines:
[ 59.418] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 59.418] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 59.418] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 59.418] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 59.418] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 59.418] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 59.418] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 59.418] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 59.418] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 59.418] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 59.418] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 59.418] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 59.418] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 59.418] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 59.418] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 59.418] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 59.418] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 59.418] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 59.418] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 60.438] (II) intel(0): EDID vendor "AOC", prod id 49553
[ 60.438] (II) intel(0): Using hsync ranges from config file
[ 60.438] (II) intel(0): Using vrefresh ranges from config file
[ 60.438] (II) intel(0): Printing DDC gathered Modelines:
[ 60.438] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 60.438] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 60.438] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 60.438] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 60.438] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 60.438] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 60.438] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 60.438] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 60.438] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 60.438] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 60.438] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 60.438] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 60.438] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 60.438] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 60.438] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 60.438] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 60.438] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 60.438] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 60.438] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 60.525] (II) intel(0): EDID vendor "AOC", prod id 49553
[ 60.525] (II) intel(0): Using hsync ranges from config file
[ 60.525] (II) intel(0): Using vrefresh ranges from config file
[ 60.525] (II) intel(0): Printing DDC gathered Modelines:
[ 60.525] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 60.525] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 60.525] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 60.525] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 60.525] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 60.525] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 60.525] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 60.525] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 60.525] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 60.525] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 60.525] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 60.525] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 60.525] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 60.525] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 60.525] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 60.525] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 60.525] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 60.525] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 60.525] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 60.584] (II) intel(0): EDID vendor "AOC", prod id 49553
[ 60.585] (II) intel(0): Using hsync ranges from config file
[ 60.585] (II) intel(0): Using vrefresh ranges from config file
[ 60.585] (II) intel(0): Printing DDC gathered Modelines:
[ 60.585] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 60.585] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 60.585] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 60.585] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 60.585] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 60.585] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 60.585] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 60.585] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 60.585] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 60.585] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 60.585] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 60.585] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 60.585] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 60.585] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 60.585] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 60.585] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 60.585] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 60.585] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 60.585] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 60.651] (II) intel(0): EDID vendor "AOC", prod id 49553
[ 60.651] (II) intel(0): Using hsync ranges from config file
[ 60.651] (II) intel(0): Using vrefresh ranges from config file
[ 60.651] (II) intel(0): Printing DDC gathered Modelines:
[ 60.651] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 60.651] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 60.651] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 60.651] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 60.651] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 60.651] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 60.651] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 60.651] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 60.651] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 60.651] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 60.651] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 60.651] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 60.651] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 60.651] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 60.651] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 60.651] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 60.651] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 60.651] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 60.651] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 60.721] (II) intel(0): EDID vendor "AOC", prod id 49553
[ 60.721] (II) intel(0): Using hsync ranges from config file
[ 60.721] (II) intel(0): Using vrefresh ranges from config file
[ 60.721] (II) intel(0): Printing DDC gathered Modelines:
[ 60.721] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 60.721] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 60.721] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 60.721] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 60.721] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 60.721] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 60.721] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 60.721] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 60.721] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 60.721] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 60.721] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 60.721] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 60.721] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 60.721] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 60.721] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 60.721] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 60.721] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 60.721] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 60.721] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 78.776] (II) intel(0): EDID vendor "AOC", prod id 49553
[ 78.776] (II) intel(0): Using hsync ranges from config file
[ 78.776] (II) intel(0): Using vrefresh ranges from config file
[ 78.776] (II) intel(0): Printing DDC gathered Modelines:
[ 78.776] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 78.776] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 78.776] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 78.776] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 78.776] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 78.776] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 78.776] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 78.776] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 78.776] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 78.776] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 78.776] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 78.776] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 78.776] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 78.776] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 78.776] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 78.776] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 78.776] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 78.776] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 78.776] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 83.903] (II) Power Button: Close
[ 83.903] (II) UnloadModule: "evdev"
[ 83.903] (II) Unloading evdev
[ 83.923] (II) Power Button: Close
[ 83.923] (II) UnloadModule: "evdev"
[ 83.923] (II) Unloading evdev
[ 84.030] (II) AT Translated Set 2 keyboard: Close
[ 84.030] (II) UnloadModule: "evdev"
[ 84.030] (II) Unloading evdev
[ 84.136] (II) ImPS/2 Generic Wheel Mouse: Close
[ 84.136] (II) UnloadModule: "evdev"
[ 84.136] (II) Unloading evdev
[ 84.155] Server terminated successfully (0). Closing log file.dmesg.log
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 (GCC) ) #1 SMP PREEMPT Tue Nov 29 09:08:04 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f590000 (usable)
[ 0.000000] BIOS-e820: 000000007f590000 - 000000007f5e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f5e3000 - 000000007f5f0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f5f0000 - 000000007f600000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: OEM OEM/G31MV/G31MV-K, BIOS 6.00 PG 04/15/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f590 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 base 07F600000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f3df0] f3df0
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
[ 0.000000] RAMDISK: 37a28000 - 37d0c000
[ 0.000000] Allocated new RAMDISK: 3751a000 - 377fdcb1
[ 0.000000] Move RAMDISK from 0000000037a28000 - 0000000037d0bcb0 to 3751a000 - 377fdcb0
[ 0.000000] ACPI: RSDP 000f82a0 00024 (v02 IntelR)
[ 0.000000] ACPI: XSDT 7f5e3080 00054 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7f5e78c0 000F4 (v03 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7f5e3200 04681 (v01 INTELR AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 7f590000 00040
[ 0.000000] ACPI: HPET 7f5e7a80 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 7f5e7ac0 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SLIC 7f5e7b00 00176 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 7f5e79c0 00084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 7f5e82e0 007EF (v01 PmRef CpuPm 00003000 INTL 20041203)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1149MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f590
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f590
[ 0.000000] On node 0 totalpages: 521503
[ 0.000000] free_area_init_node: node 0, pgdat c05ce580, node_mem_map f6529200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2300 pages used for memmap
[ 0.000000] HighMem zone: 291990 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7f600000 (gap: 7f600000:60a00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6000000 s29632 r0 d23616 u1048576
[ 0.000000] pcpu-alloc: s29632 r0 d23616 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517427
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sdb1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8345600 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f590)
[ 0.000000] Memory: 2051108k/2086464k available (3470k kernel code, 34904k reserved, 1485k data, 508k init, 1177160k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc05d7000 - 0xc0656000 ( 508 kB)
[ 0.000000] .data : 0xc0463a15 - 0xc05d6fc0 (1485 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0463a15 (3470 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f540e000 soft=f5420000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2666.155 MHz processor.
[ 0.003335] Calibrating delay loop (skipped), value calculated using timer frequency.. 5334.48 BogoMIPS (lpj=8887183)
[ 0.003339] pid_max: default: 32768 minimum: 301
[ 0.003372] Security Framework initialized
[ 0.003377] AppArmor: AppArmor disabled by boot time parameter
[ 0.003395] Mount-cache hash table entries: 512
[ 0.006814] Initializing cgroup subsys cpuacct
[ 0.006825] Initializing cgroup subsys memory
[ 0.006834] Initializing cgroup subsys devices
[ 0.006836] Initializing cgroup subsys freezer
[ 0.006837] Initializing cgroup subsys net_cls
[ 0.006839] Initializing cgroup subsys blkio
[ 0.006872] CPU: Physical Processor ID: 0
[ 0.006873] CPU: Processor Core ID: 0
[ 0.006876] mce: CPU supports 6 MCE banks
[ 0.006883] CPU0: Thermal monitoring enabled (TM2)
[ 0.006887] using mwait in idle threads.
[ 0.007562] ACPI: Core revision 20110623
[ 0.010009] ftrace: allocating 15582 entries in 31 pages
[ 0.013368] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.013665] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.048290] CPU0: Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz stepping 06
[ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.049997] ... version: 2
[ 0.049997] ... bit width: 40
[ 0.049997] ... generic registers: 2
[ 0.049997] ... value mask: 000000ffffffffff
[ 0.049997] ... max period: 000000007fffffff
[ 0.049997] ... fixed-purpose events: 3
[ 0.049997] ... event mask: 0000000700000003
[ 0.066948] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.093345] CPU 1 irqstacks, hard=f54f2000 soft=f54f4000
[ 0.093348] Booting Node 0, Processors #1
[ 0.093351] smpboot cpu 1: start_ip = 9b000
[ 0.006666] Initializing CPU#1
[ 0.190012] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.196660] Brought up 2 CPUs
[ 0.196663] Total of 2 processors activated (10669.72 BogoMIPS).
[ 0.197925] devtmpfs: initialized
[ 0.197925] PM: Registering ACPI NVS region at 7f590000 (339968 bytes)
[ 0.197925] print_constraints: dummy:
[ 0.197925] NET: Registered protocol family 16
[ 0.197925] ACPI: bus type pci registered
[ 0.197925] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.197925] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.197925] PCI: Using MMCONFIG for extended config space
[ 0.197925] PCI: Using configuration type 1 for base access
[ 0.198160] bio: create slab <bio-0> at 0
[ 0.198160] ACPI: Added _OSI(Module Device)
[ 0.198160] ACPI: Added _OSI(Processor Device)
[ 0.198160] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.198160] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.200626] ACPI: EC: Look up EC in DSDT
[ 0.203471] ACPI: SSDT 7f5e7cc0 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
[ 0.203626] ACPI: Dynamic OEM Table Load:
[ 0.203629] ACPI: SSDT (null) 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
[ 0.203842] ACPI: SSDT 7f5e8180 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
[ 0.203990] ACPI: Dynamic OEM Table Load:
[ 0.203993] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
[ 0.204156] ACPI: Interpreter enabled
[ 0.204160] ACPI: (supports S0 S3 S4 S5)
[ 0.204176] ACPI: Using IOAPIC for interrupt routing
[ 0.207646] ACPI: No dock devices found.
[ 0.207648] HEST: Table not found.
[ 0.207651] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.207693] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.207787] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.207790] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.207792] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.207794] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.207796] pci_root PNP0A08:00: host bridge window [mem 0x7f600000-0xfebfffff]
[ 0.207808] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[ 0.207843] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
[ 0.207869] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.207872] pci 0000:00:01.0: PME# disabled
[ 0.207884] pci 0000:00:02.0: [8086:29c2] type 0 class 0x000300
[ 0.207893] pci 0000:00:02.0: reg 10: [mem 0xfdf00000-0xfdf7ffff]
[ 0.207898] pci 0000:00:02.0: reg 14: [io 0xff00-0xff07]
[ 0.207902] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.207907] pci 0000:00:02.0: reg 1c: [mem 0xfde00000-0xfdefffff]
[ 0.207959] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.207972] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.208018] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.208021] pci 0000:00:1b.0: PME# disabled
[ 0.208038] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.208085] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.208088] pci 0000:00:1c.0: PME# disabled
[ 0.208106] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.208153] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.208156] pci 0000:00:1c.1: PME# disabled
[ 0.208176] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.208211] pci 0000:00:1d.0: reg 20: [io 0xfe00-0xfe1f]
[ 0.208235] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.208270] pci 0000:00:1d.1: reg 20: [io 0xfd00-0xfd1f]
[ 0.208294] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.208329] pci 0000:00:1d.2: reg 20: [io 0xfc00-0xfc1f]
[ 0.208353] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.208388] pci 0000:00:1d.3: reg 20: [io 0xfb00-0xfb1f]
[ 0.208420] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.208436] pci 0000:00:1d.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.208497] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.208500] pci 0000:00:1d.7: PME# disabled
[ 0.208515] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.208562] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
[ 0.208635] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[ 0.208638] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
[ 0.208666] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.208677] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.208685] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.208693] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.208701] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.208709] pci 0000:00:1f.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.208737] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[ 0.208749] pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907]
[ 0.208756] pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803]
[ 0.208763] pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707]
[ 0.208769] pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603]
[ 0.208776] pci 0000:00:1f.2: reg 20: [io 0xf500-0xf50f]
[ 0.208800] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.208803] pci 0000:00:1f.2: PME# disabled
[ 0.208815] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.208861] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.208910] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.208913] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.208915] pci 0000:00:01.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.208919] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.208953] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.208957] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.208960] pci 0000:00:1c.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.208965] pci 0000:00:1c.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.209020] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 0.209037] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
[ 0.209066] pci 0000:03:00.0: reg 18: [mem 0xfdaff000-0xfdafffff 64bit]
[ 0.209100] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.209143] pci 0000:03:00.0: supports D1 D2
[ 0.209144] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.209149] pci 0000:03:00.0: PME# disabled
[ 0.209171] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.209181] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.209184] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
[ 0.209188] pci 0000:00:1c.1: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.209193] pci 0000:00:1c.1: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.209245] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.209249] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.209252] pci 0000:00:1e.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.209257] pci 0000:00:1e.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.209259] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.209261] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.209263] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.209266] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.209268] pci 0000:00:1e.0: bridge window [mem 0x7f600000-0xfebfffff] (subtractive decode)
[ 0.209282] pci_bus 0000:00: on NUMA node 0
[ 0.209284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.209387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.209416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.209450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.209505] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.209507] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.209509] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.216001] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.216040] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.216081] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.216119] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
[ 0.216157] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.216196] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.216235] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.216274] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.216322] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.216322] vgaarb: loaded
[ 0.216322] vgaarb: bridge control possible 0000:00:02.0
[ 0.216322] PCI: Using ACPI for IRQ routing
[ 0.221625] PCI: pci_cache_line_size set to 64 bytes
[ 0.221679] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.221681] reserve RAM buffer: 000000007f590000 - 000000007fffffff
[ 0.221774] NetLabel: Initializing
[ 0.221776] NetLabel: domain hash size = 128
[ 0.221777] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.221787] NetLabel: unlabeled traffic allowed by default
[ 0.221797] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.221801] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.221804] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.233338] Switching to clocksource hpet
[ 0.236492] Switched to NOHz mode on CPU #0
[ 0.236621] Switched to NOHz mode on CPU #1
[ 0.238770] pnp: PnP ACPI init
[ 0.238784] ACPI: bus type pnp registered
[ 0.238859] pnp 00:00: [bus 00-ff]
[ 0.238861] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.238863] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.238867] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.238869] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.238871] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.238873] pnp 00:00: [mem 0x7f600000-0xfebfffff window]
[ 0.238925] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.238974] pnp 00:01: [io 0x0010-0x001f]
[ 0.238976] pnp 00:01: [io 0x0022-0x003f]
[ 0.238978] pnp 00:01: [io 0x0044-0x005f]
[ 0.238979] pnp 00:01: [io 0x0062-0x0063]
[ 0.238981] pnp 00:01: [io 0x0065-0x006f]
[ 0.238983] pnp 00:01: [io 0x0074-0x007f]
[ 0.238984] pnp 00:01: [io 0x0091-0x0093]
[ 0.238986] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.238987] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.238989] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.238991] pnp 00:01: [io 0x0290-0x029f]
[ 0.238992] pnp 00:01: [io 0x0800-0x087f]
[ 0.238994] pnp 00:01: [io 0x0290-0x0297]
[ 0.238995] pnp 00:01: [io 0x0880-0x088f]
[ 0.239045] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.239047] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.239050] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.239052] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.239054] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.239057] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.239067] pnp 00:02: [dma 4]
[ 0.239068] pnp 00:02: [io 0x0000-0x000f]
[ 0.239070] pnp 00:02: [io 0x0080-0x0090]
[ 0.239072] pnp 00:02: [io 0x0094-0x009f]
[ 0.239073] pnp 00:02: [io 0x00c0-0x00df]
[ 0.239099] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.239139] pnp 00:03: [irq 0 disabled]
[ 0.239148] pnp 00:03: [irq 8]
[ 0.239150] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.239175] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.239198] pnp 00:04: [io 0x0070-0x0073]
[ 0.239223] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.239230] pnp 00:05: [io 0x0061]
[ 0.239254] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.239261] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.239266] pnp 00:06: [irq 13]
[ 0.239290] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.239404] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.239406] pnp 00:07: [io 0x03f7]
[ 0.239410] pnp 00:07: [irq 6]
[ 0.239412] pnp 00:07: [dma 2]
[ 0.239448] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.239605] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.239609] pnp 00:08: [irq 4]
[ 0.239658] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.239873] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.239877] pnp 00:09: [irq 3]
[ 0.239921] pnp 00:09: Plug and Play ACPI device, IDs PNP0510 (active)
[ 0.239953] pnp 00:0a: [irq 12]
[ 0.239980] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.240011] pnp 00:0b: [io 0x0060]
[ 0.240013] pnp 00:0b: [io 0x0064]
[ 0.240017] pnp 00:0b: [irq 1]
[ 0.240044] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.240073] pnp 00:0c: [io 0x0400-0x04bf]
[ 0.240111] system 00:0c: [io 0x0400-0x04bf] has been reserved
[ 0.240114] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.240129] pnp 00:0d: [mem 0xffb80000-0xffbfffff]
[ 0.240156] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.240307] pnp 00:0e: [mem 0xe0000000-0xefffffff]
[ 0.240353] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.240355] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.240410] pnp 00:0f: [mem 0x000f0000-0x000fffff]
[ 0.240412] pnp 00:0f: [mem 0x7f600000-0x7f6fffff]
[ 0.240414] pnp 00:0f: [mem 0xfed00000-0xfed000ff]
[ 0.240415] pnp 00:0f: [mem 0x7f590000-0x7f5fffff]
[ 0.240417] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.240419] pnp 00:0f: [mem 0x00100000-0x7f58ffff]
[ 0.240420] pnp 00:0f: [mem 0xfec00000-0xfec00fff]
[ 0.240422] pnp 00:0f: [mem 0xfed13000-0xfed1dfff]
[ 0.240424] pnp 00:0f: [mem 0xfed20000-0xfed8ffff]
[ 0.240426] pnp 00:0f: [mem 0xfee00000-0xfee00fff]
[ 0.240427] pnp 00:0f: [mem 0xffb00000-0xffb7ffff]
[ 0.240429] pnp 00:0f: [mem 0xfff00000-0xffffffff]
[ 0.240431] pnp 00:0f: [mem 0x000e0000-0x000effff]
[ 0.240483] system 00:0f: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.240485] system 00:0f: [mem 0x7f600000-0x7f6fffff] has been reserved
[ 0.240487] system 00:0f: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.240490] system 00:0f: [mem 0x7f590000-0x7f5fffff] could not be reserved
[ 0.240492] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.240494] system 00:0f: [mem 0x00100000-0x7f58ffff] could not be reserved
[ 0.240496] system 00:0f: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.240499] system 00:0f: [mem 0xfed13000-0xfed1dfff] has been reserved
[ 0.240501] system 00:0f: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.240503] system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.240505] system 00:0f: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.240508] system 00:0f: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.240510] system 00:0f: [mem 0x000e0000-0x000effff] has been reserved
[ 0.240512] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.240520] pnp: PnP ACPI: found 16 devices
[ 0.240521] ACPI: ACPI bus type pnp unregistered
[ 0.277155] PCI: max bus depth: 1 pci_try_num: 2
[ 0.277179] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.277182] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.277185] pci 0000:00:01.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.277188] pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.277192] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.277194] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.277199] pci 0000:00:1c.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.277202] pci 0000:00:1c.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.277209] pci 0000:03:00.0: BAR 6: assigned [mem 0xfd900000-0xfd91ffff pref]
[ 0.277212] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.277214] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff]
[ 0.277219] pci 0000:00:1c.1: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.277222] pci 0000:00:1c.1: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.277227] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.277229] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.277233] pci 0000:00:1e.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.277237] pci 0000:00:1e.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.277248] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.277252] pci 0000:00:01.0: setting latency timer to 64
[ 0.277257] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.277260] pci 0000:00:1c.0: setting latency timer to 64
[ 0.277268] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.277271] pci 0000:00:1c.1: setting latency timer to 64
[ 0.277276] pci 0000:00:1e.0: setting latency timer to 64
[ 0.277280] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.277282] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.277284] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.277286] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.277288] pci_bus 0000:00: resource 8 [mem 0x7f600000-0xfebfffff]
[ 0.277290] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.277292] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.277294] pci_bus 0000:01: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.277296] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.277298] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.277300] pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.277302] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.277304] pci_bus 0000:03: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.277306] pci_bus 0000:03: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.277308] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.277310] pci_bus 0000:04: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 0.277312] pci_bus 0000:04: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.277314] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.277316] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.277318] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.277320] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.277322] pci_bus 0000:04: resource 8 [mem 0x7f600000-0xfebfffff]
[ 0.277360] NET: Registered protocol family 2
[ 0.277424] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.277599] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.278045] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.278262] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.278264] TCP reno registered
[ 0.278266] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.278275] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.278349] NET: Registered protocol family 1
[ 0.278362] pci 0000:00:02.0: Boot video device
[ 0.278451] PCI: CLS 64 bytes, default 64
[ 0.278492] Unpacking initramfs...
[ 0.313106] Freeing initrd memory: 2960k freed
[ 0.314265] apm: BIOS not found.
[ 0.314432] audit: initializing netlink socket (disabled)
[ 0.314444] type=2000 audit(1322822763.313:1): initialized
[ 0.318530] highmem bounce pool size: 64 pages
[ 0.318534] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.326360] VFS: Disk quotas dquot_6.5.2
[ 0.326430] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.326529] msgmni has been set to 1712
[ 0.326706] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.326730] io scheduler noop registered
[ 0.326732] io scheduler deadline registered
[ 0.326742] io scheduler cfq registered (default)
[ 0.326839] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.326865] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.326906] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.326935] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.326985] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.327015] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.327166] intel_idle: MWAIT substates: 0x22220
[ 0.327168] intel_idle: does not run on family 6 model 23
[ 0.327192] ERST: Table is not found!
[ 0.327194] GHES: HEST is not enabled!
[ 0.327205] isapnp: Scanning for PnP cards...
[ 0.682783] isapnp: No Plug & Play device found
[ 0.682849] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.703328] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.753808] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.920639] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.953681] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.954011] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.954040] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.954131] mousedev: PS/2 mouse device common for all mice
[ 0.954188] rtc_cmos 00:04: RTC can wake from S4
[ 0.954281] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.954302] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.954321] cpuidle: using governor ladder
[ 0.954322] cpuidle: using governor menu
[ 0.954508] TCP cubic registered
[ 0.954511] NET: Registered protocol family 17
[ 0.954517] Registering the dns_resolver key type
[ 0.954530] Using IPI No-Shortcut mode
[ 0.954613] PM: Hibernation image not present or could not be loaded.
[ 0.954617] registered taskstats version 1
[ 0.958055] rtc_cmos 00:04: setting system clock to 2011-12-02 10:46:04 UTC (1322822764)
[ 0.958090] Initializing network drop monitor service
[ 0.958164] Freeing unused kernel memory: 508k freed
[ 0.958321] Write protecting the kernel text: 3472k
[ 0.958340] Write protecting the kernel read-only data: 1076k
[ 0.967733] udevd[59]: starting version 175
[ 0.970465] Linux agpgart interface v0.103
[ 0.971109] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.971114] ACPI: Power Button [PWRB]
[ 0.971168] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.971171] ACPI: Power Button [PWRF]
[ 0.971737] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[ 0.971798] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.972288] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.972509] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.972648] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.978336] [drm] Initialized drm 1.1.0 20060810
[ 0.990446] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.990450] i915 0000:00:02.0: setting latency timer to 64
[ 1.001994] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 1.001999] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.002000] [drm] Driver supports precise vblank timestamp query.
[ 1.002031] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.016428] [drm] initialized overlay support
[ 1.083081] fbcon: inteldrmfb (fb0) is primary device
[ 1.128413] Console: switching to colour frame buffer device 180x56
[ 1.132846] fb0: inteldrmfb frame buffer device
[ 1.132847] drm: registered panic notifier
[ 1.132889] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.192392] usbcore: registered new interface driver usbfs
[ 1.192413] usbcore: registered new interface driver hub
[ 1.195869] usbcore: registered new device driver usb
[ 1.197744] SCSI subsystem initialized
[ 1.202958] libata version 3.00 loaded.
[ 1.203510] ata_piix 0000:00:1f.1: version 2.13
[ 1.203535] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.203572] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.203920] scsi0 : ata_piix
[ 1.205543] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.205770] scsi1 : ata_piix
[ 1.206164] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.206167] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.206203] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.206209] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.206246] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.206334] ata2: port disabled--ignoring
[ 1.206530] scsi2 : ata_piix
[ 1.206589] scsi3 : ata_piix
[ 1.206976] ata3: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
[ 1.206978] ata4: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
[ 1.207011] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.207024] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.207027] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.207051] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.207069] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.207078] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.210961] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.210976] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 1.223351] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.223520] hub 1-0:1.0: USB hub found
[ 1.223524] hub 1-0:1.0: 8 ports detected
[ 1.309153] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.309217] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.309225] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.309228] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.309237] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.309263] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
[ 1.309384] hub 2-0:1.0: USB hub found
[ 1.309387] hub 2-0:1.0: 2 ports detected
[ 1.309443] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.309447] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.309450] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.309456] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.309477] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
[ 1.309590] hub 3-0:1.0: USB hub found
[ 1.309593] hub 3-0:1.0: 2 ports detected
[ 1.309647] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.309652] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.309654] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.309660] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.309690] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
[ 1.309797] hub 4-0:1.0: USB hub found
[ 1.309800] hub 4-0:1.0: 2 ports detected
[ 1.309855] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.309860] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.309862] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.309868] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.309895] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
[ 1.310014] hub 5-0:1.0: USB hub found
[ 1.310017] hub 5-0:1.0: 2 ports detected
[ 1.316683] Refined TSC clocksource calibration: 2666.568 MHz.
[ 1.316688] Switching to clocksource tsc
[ 1.374455] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.00, max UDMA/66
[ 1.385400] ata3.01: ATA-7: SAMSUNG HD322HJ, 1AC01112, max UDMA7
[ 1.385405] ata3.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.386894] ata1.00: configured for UDMA/66
[ 1.389019] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.00 PQ: 0 ANSI: 5
[ 1.406901] ata3.01: configured for UDMA/133
[ 1.407029] scsi 2:0:1:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5
[ 1.412346] sd 2:0:1:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.412392] sd 2:0:1:0: [sda] Write Protect is off
[ 1.412394] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.412411] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.448544] sda: sda1 sda2 sda3 sda4
[ 1.448867] sd 2:0:1:0: [sda] Attached SCSI disk
[ 1.451628] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.451633] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.451860] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.530018] usb 1-8: new high speed USB device number 2 using ehci_hcd
[ 1.898372] Initializing USB Mass Storage driver...
[ 1.898710] scsi4 : usb-storage 1-8:1.0
[ 1.898786] usbcore: registered new interface driver usb-storage
[ 1.898787] USB Mass Storage support registered.
[ 3.548267] scsi 4:0:0:0: Direct-Access hp v165w 1100 PQ: 0 ANSI: 0 CCS
[ 3.548828] scsi: killing requests for dead queue
[ 3.549116] scsi: killing requests for dead queue
[ 3.549144] sd 4:0:0:0: [sdb] 31703040 512-byte logical blocks: (16.2 GB/15.1 GiB)
[ 3.549866] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.549870] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 3.549896] scsi: killing requests for dead queue
[ 3.550616] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.550672] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.550801] scsi: killing requests for dead queue
[ 3.550906] scsi: killing requests for dead queue
[ 3.551518] scsi: killing requests for dead queue
[ 3.551762] scsi: killing requests for dead queue
[ 3.552140] scsi: killing requests for dead queue
[ 3.553367] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.553422] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.554403] sdb: sdb1
[ 3.557738] sd 4:0:0:0: [sdb] No Caching mode page present
[ 3.557794] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.557849] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3.930431] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.535504] udevd[254]: starting version 175
[ 4.678017] fuse init (API version 7.17)
[ 4.746083] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.746085] ACPI: Thermal Zone [THRM] (40 C)
[ 4.746124] ACPI: Fan [FAN] (on)
[ 4.751825] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.756002] Floppy drive(s): fd0 is 1.44M
[ 4.759541] ACPI: acpi_idle registered with cpuidle
[ 4.773754] FDC 0 is a post-1991 82077
[ 4.800753] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.808391] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.808406] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.808430] r8169 0000:03:00.0: setting latency timer to 64
[ 4.808492] r8169 0000:03:00.0: irq 44 for MSI/MSI-X
[ 4.808690] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xf8f90000, 00:1f:e2:53:cd:cf, XID 98500000 IRQ 44
[ 4.829907] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.829946] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 4.829967] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 4.869340] hda_codec: ALC662 rev1: BIOS auto-probing.
[ 4.878666] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 4.934117] leds_ss4200: no LED devices found
[ 4.946607] intel_rng: FWH not detected
[ 4.962633] psmouse serio1: ID: 10 00 64
[ 4.978667] iTCO_vendor_support: vendor-support=0
[ 4.980120] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 4.980297] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 4.980392] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.235549] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 5.594018] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 6.730062] Adding 1919760k swap on /dev/sda3. Priority:-1 extents:1 across:1919760k startx output:
X.Org X Server 1.11.2
Release Date: 2011-11-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.1.1-1-ARCH i686
Current Operating System: Linux Ardilla 3.1.4-1-ARCH #1 SMP PREEMPT Tue Nov 29 09:08:04 UTC 2011 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sdb1
Build Date: 16 November 2011 11:26:40AM
Current version of pixman: 0.24.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 2 06:16:59 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
gnome-session[924]: GLib-WARNING: XDG_RUNTIME_DIR variable not set. Falling back to XDG cache dir.
(gnome-settings-daemon:934): GLib-WARNING **: XDG_RUNTIME_DIR variable not set. Falling back to XDG cache dir.
GNOME_KEYRING_CONTROL=/tmp/keyring-73oxiS
GNOME_KEYRING_PID=942
GNOME_KEYRING_CONTROL=/tmp/keyring-73oxiS
GNOME_KEYRING_CONTROL=/tmp/keyring-73oxiS
SSH_AUTH_SOCK=/tmp/keyring-73oxiS/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-73oxiS
SSH_AUTH_SOCK=/tmp/keyring-73oxiS/ssh
GPG_AGENT_INFO=/tmp/keyring-73oxiS/gpg:0:1
** (gnome-settings-daemon:934): WARNING **: /usr/lib/gnome-settings-daemon-3.0/libcolor.so: undefined symbol: g_settings_get_uint
** (gnome-settings-daemon:934): WARNING **: Cannot load plugin 'Color' since file '/usr/lib/gnome-settings-daemon-3.0/libcolor.so' cannot be read.
** (gnome-settings-daemon:934): WARNING **: Error activating plugin 'Color'
(gnome-settings-daemon:934): libupower-glib-WARNING **: Couldn't enumerate devices: Message did not receive a reply (timeout by message bus)
(gnome-settings-daemon:934): power-plugin-WARNING **: failed to get device list: Message did not receive a reply (timeout by message bus)
WARNING: gnome-keyring:: no socket to connect to
** (gnome-settings-daemon:934): WARNING **: /usr/lib/gnome-settings-daemon-3.0/libhousekeeping.so: undefined symbol: g_format_size
** (gnome-settings-daemon:934): WARNING **: Cannot load plugin 'Housekeeping' since file '/usr/lib/gnome-settings-daemon-3.0/libhousekeeping.so' cannot be read.
** (gnome-settings-daemon:934): WARNING **: Error activating plugin 'Housekeeping'
(gnome-settings-daemon:934): power-plugin-WARNING **: Failed to get brightness: GDBus.Error:org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
** (gnome-settings-daemon:934): WARNING **: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process /usr/lib/dconf/dconf-service exited with status 127
[xcb] Extra reply data still left in queue
[xcb] This is most likely caused by a broken X extension library
[xcb] Aborting, sorry about that.
gnome-settings-daemon: xcb_io.c:575: _XReply: Assertion `!xcb_xlib_extra_reply_data_left' failed.
[1322822823,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application
(gnome-settings-daemon:991): GLib-WARNING **: XDG_RUNTIME_DIR variable not set. Falling back to XDG cache dir.
** (gnome-settings-daemon:991): WARNING **: /usr/lib/gnome-settings-daemon-3.0/libcolor.so: undefined symbol: g_settings_get_uint
** (gnome-settings-daemon:991): WARNING **: Cannot load plugin 'Color' since file '/usr/lib/gnome-settings-daemon-3.0/libcolor.so' cannot be read.
** (gnome-settings-daemon:991): WARNING **: Error activating plugin 'Color'
gnome-session[924]: WARNING: Application 'gnome-settings-daemon.desktop' killed by signal
(gnome-settings-daemon:991): libupower-glib-WARNING **: Couldn't enumerate devices: Message did not receive a reply (timeout by message bus)
(gnome-settings-daemon:991): power-plugin-WARNING **: failed to get device list: Message did not receive a reply (timeout by message bus)
** (gnome-settings-daemon:991): WARNING **: /usr/lib/gnome-settings-daemon-3.0/libhousekeeping.so: undefined symbol: g_format_size
** (gnome-settings-daemon:991): WARNING **: Cannot load plugin 'Housekeeping' since file '/usr/lib/gnome-settings-daemon-3.0/libhousekeeping.so' cannot be read.
** (gnome-settings-daemon:991): WARNING **: Error activating plugin 'Housekeeping'
(gnome-settings-daemon:991): power-plugin-WARNING **: Failed to get brightness: GDBus.Error:org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
(gnome-shell:988): GLib-WARNING **: XDG_RUNTIME_DIR variable not set. Falling back to XDG cache dir.
Window manager warning: 0 stored in GConf key /desktop/gnome/peripherals/mouse/cursor_size is out of range 1 to 128
gnome-session[924]: WARNING: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process /usr/lib/dconf/dconf-service exited with status 127
** (gnome-settings-daemon:991): WARNING **: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process /usr/lib/dconf/dconf-service exited with status 127
(gnome-settings-daemon:991): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
gnome-session[924]: WARNING: App 'gnome-settings-daemon.desktop' respawning too quickly
(gnome-screensaver:1021): GLib-WARNING **: XDG_RUNTIME_DIR variable not set. Falling back to XDG cache dir.
JS ERROR: !!! Exception was: Error: Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv
JS ERROR: !!! lineNumber = '0'
JS ERROR: !!! fileName = '"gjs_throw"'
JS ERROR: !!! stack = '"("Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv")@gjs_throw:0
_init()@/usr/share/gjs-1.0/overrides/GLib.js:243
@/usr/share/gnome-shell/js/ui/environment.js:3
"'
JS ERROR: !!! message = '"Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv"'
JS ERROR: !!! Exception was: Error: Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv
JS ERROR: !!! lineNumber = '0'
JS ERROR: !!! fileName = '"gjs_throw"'
JS ERROR: !!! stack = '"("Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv")@gjs_throw:0
_init()@/usr/share/gjs-1.0/overrides/GLib.js:243
@/usr/share/gnome-shell/js/ui/environment.js:3
"'
JS ERROR: !!! message = '"Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv"'
Window manager warning: Log level 32: Execution of main.js threw exception: Error: Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv
Failed to play sound: File or data not found
** Message: applet now removed from the notification area
(nm-applet:1022): libnotify-WARNING **: Failed to connect to proxy
** (nm-applet:1022): WARNING **: get_all_cb: couldn't retrieve system settings properties: (25) Launch helper exited with unknown return code 1.
** (nm-applet:1022): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.
** (nm-applet:1022): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
(gnome-shell:1036): GLib-WARNING **: XDG_RUNTIME_DIR variable not set. Falling back to XDG cache dir.
Window manager warning: 0 stored in GConf key /desktop/gnome/peripherals/mouse/cursor_size is out of range 1 to 128
JS ERROR: !!! Exception was: Error: Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv
JS ERROR: !!! lineNumber = '0'
JS ERROR: !!! fileName = '"gjs_throw"'
JS ERROR: !!! stack = '"("Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv")@gjs_throw:0
_init()@/usr/share/gjs-1.0/overrides/GLib.js:243
@/usr/share/gnome-shell/js/ui/environment.js:3
"'
JS ERROR: !!! message = '"Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv"'
JS ERROR: !!! Exception was: Error: Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv
JS ERROR: !!! lineNumber = '0'
JS ERROR: !!! fileName = '"gjs_throw"'
JS ERROR: !!! stack = '"("Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv")@gjs_throw:0
_init()@/usr/share/gjs-1.0/overrides/GLib.js:243
@/usr/share/gnome-shell/js/ui/environment.js:3
"'
JS ERROR: !!! message = '"Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv"'
Window manager warning: Log level 32: Execution of main.js threw exception: Error: Could not locate g_variant_new_objv: `g_variant_new_objv': /usr/lib/libgobject-2.0.so.0: undefined symbol: g_variant_new_objv
gnome-session[924]: WARNING: App 'gnome-shell.desktop' respawning too quickly
** (process:978): DEBUG: Exiting gsd-printer
** (process:1002): DEBUG: Exiting gsd-printer
xinit: connection to X server lost
waiting for X server to shut down Server terminated successfully (0). Closing log file.Offline
#15 2011-12-02 15:55:11
- wonder
- Developer
- From: Bucharest, Romania
- Registered: 2006-07-05
- Posts: 5,941
- Website
Re: [SOLVED] I can not start Gnome3
you have a lot of undefined symbols. are you sure you are fully up to date? especially glib2, gobject-introspection
Give what you have. To someone, it may be better than you dare to think.
Offline
#16 2011-12-02 16:18:33
- jair
- Member
- Registered: 2011-12-02
- Posts: 9
Re: [SOLVED] I can not start Gnome3
I will format the hard disk, I will install archlinux again and then tell them what happened.
Offline
#17 2011-12-02 17:04:45
- lifeafter2am
- Member
- From: 127.0.0.1
- Registered: 2009-06-10
- Posts: 1,332
Re: [SOLVED] I can not start Gnome3
jair wrote:
I will format the hard disk, I will install archlinux again and then tell them what happened.
Or you could check to make sure your mirror is up to date (http://www.archlinux.org/mirrors/status/) and then run an update.
Even if you do decide to reinstall, make sure to use a current mirror.
#binarii @ irc.binarii.net
Matrix Server: https://matrix.binarii.net
-------------
Allan -> ArchBang is not supported because it is stupid.
Offline
#18 2011-12-07 20:50:36
- jair
- Member
- Registered: 2011-12-02
- Posts: 9
Re: [SOLVED] I can not start Gnome3
[SOLVED] It was enough to reinstall Arch, I am not fully up to date
Thanks wonder, lifeafter2am and Mavirick
But there is one problem: When I poweroff via gdm, the PC (after a few minutes) restarts itself.
What I can do to fix this problem?
Offline