You are not logged in.

#1 2011-12-08 19:16:38

LB06
Member
From: The Netherlands
Registered: 2003-10-29
Posts: 435

Pulse doesn't allow hdmi surround

Pulse used to be able to enable 5.1 playback (over HDMI or analogue jacks) simply by setting the number of channels to 6. This, however, no longer seems to work. The fault seems to be caused by Pulse somehow misdetecting my audio device, because a

speaker-test -c6 -Dhw:0,3

works just fine. And before, on Ubuntu Karmic to Oneiric it has always worked just fine. I should probably mention we're talking about a Geforce GTX550 Ti.

aplay -l wrote:

card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

aplay -L wrote:

null
    Discard all samples (playback) or generate zero samples (capture)
hdmi:CARD=NVidia,DEV=0
    HDA NVidia, HDMI 0
    HDMI Audio Output

The problem seems to be that Pulse insist that my HDMI device is a stereo-only output:

pacmd list-sinks wrote:

>>> 1 sink(s) available.
  * index: 0
    name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9050
    volume: 0: 100% 1: 100%
            0: 0,00 dB 1: 0,00 dB
            balance 0,00
    base volume: 100%
                 0,00 dB
    volume steps: 65537
    muted: no
    current latency: 0,00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 0
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
                 Stereo
    used by: 0
    linked by: 0
    configured latency: 0,00 ms; range is 0,50 .. 1999,82 ms
    card: 0 <alsa_card.pci-0000_01_00.1>
    module: 4
    properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "HDMI 0"
        alsa.id = "HDMI 0"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "3"
        alsa.card = "0"
        alsa.card_name = "HDA NVidia"
        alsa.long_card_name = "HDA NVidia at 0xfeafc000 irq 17"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:01:00.1"
        sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0"
        device.bus = "pci"
        device.vendor.id = "10de"
        device.vendor.name = "nVidia Corporation"
        device.string = "hdmi:0"
        device.buffering.buffer_size = "352768"
        device.buffering.fragment_size = "176384"
        device.access_mode = "mmap+timer"
        device.profile.name = "hdmi-stereo"
        device.profile.description = "Digital Stereo (HDMI)"
        device.description = "HDA NVidia Digital Stereo (HDMI)"
        alsa.mixer_name = "Nvidia GPU 15 HDMI/DP"
        alsa.components = "HDA:10de0015,10de0101,00100100"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"

This is also reflected in the gnome-setting app and pavucontrol.

Does anybody have any idea what is going on? Thanks!

Last edited by LB06 (2011-12-08 19:44:38)

Offline

#2 2012-02-24 07:17:01

megagram
Member
Registered: 2007-12-26
Posts: 46

Re: Pulse doesn't allow hdmi surround

+1 for me too.

Offline

Board footer

Powered by FluxBB