You are not logged in.
- Topics: Active | Unanswered
#1 2012-01-02 01:56:06
- wims
- Member
- Registered: 2009-05-26
- Posts: 15
Wireless regulatory domain set to GB, even tho BO have been selected
Hello,
for some reason something is setting my wireless regulatory domain to GB right after wicd associates my adapter with my access point. I have selected the correct domain in /etc/conf.d/wireless-regdom (everything but my domain has been commented out, I have installed crda) and added wireless-regdom to my DAEMONS line. Does anybody have an idea what is changing it to GB?
Here's a paste of dmesg showing the problem
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20111125 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Dec 22 09:11:48 CET 2011
[ 0.000000] Command line: root=/dev/disk/by-label/archroot ro 5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfde0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfde0000 - 00000000dfee0000 (reserved)
[ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee1000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001a0000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. EX58-UD5/EX58-UD5, BIOS F13q 11/12/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1a0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask F00000000 write-back
[ 0.000000] 3 base 1C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 1A0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfde0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f5c40] f5c40
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfde0000
[ 0.000000] 0000000000 - 00dfc00000 page 2M
[ 0.000000] 00dfc00000 - 00dfde0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfde0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001a0000000
[ 0.000000] 0100000000 - 01a0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1a0000000 @ dfdd8000-dfde0000
[ 0.000000] RAMDISK: 37d89000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f7600 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000dfee1040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000dfee10c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000dfee1180 04A7B (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000dfee0000 00040
[ 0.000000] ACPI: HPET 00000000dfee5dc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000dfee5e40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 00000000dfee5e80 00470 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000dfee62f0 00AF2 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000dfee5c40 0012C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000dfee6e00 00CCC (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001a0000000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001a0000000
[ 0.000000] NODE_DATA [000000019fffb000 - 000000019fffffff]
[ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880199600000-ffff88019f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001a0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfde0
[ 0.000000] 0: 0x00100000 -> 0x001a0000
[ 0.000000] On node 0 totalpages: 1572207
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 896544 pages, LIFO batch:31
[ 0.000000] Normal zone: 10240 pages used for memmap
[ 0.000000] Normal zone: 645120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfde0000 - 00000000dfee0000
[ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee1000
[ 0.000000] PM: Registered nosave memory: 00000000dfee1000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88019fc00000 s80448 r8192 d21952 u131072
[ 0.000000] pcpu-alloc: s80448 r8192 d21952 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1545578
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-label/archroot ro 5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6108484k/6815744k available (4158k kernel code, 526916k absent, 180344k reserved, 5286k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 50331648 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 3499.966 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7002.59 BogoMIPS (lpj=11666553)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000071] Security Framework initialized
[ 0.000074] AppArmor: AppArmor disabled by boot time parameter
[ 0.000507] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001636] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002093] Mount-cache hash table entries: 256
[ 0.002338] Initializing cgroup subsys cpuacct
[ 0.002357] Initializing cgroup subsys memory
[ 0.002367] Initializing cgroup subsys devices
[ 0.002368] Initializing cgroup subsys freezer
[ 0.002370] Initializing cgroup subsys net_cls
[ 0.002371] Initializing cgroup subsys blkio
[ 0.002400] CPU: Physical Processor ID: 0
[ 0.002401] CPU: Processor Core ID: 0
[ 0.002404] mce: CPU supports 9 MCE banks
[ 0.002411] CPU0: Thermal monitoring enabled (TM1)
[ 0.002416] using mwait in idle threads.
[ 0.003061] ACPI: Core revision 20110623
[ 0.004974] ftrace: allocating 16320 entries in 65 pages
[ 0.008188] Switched APIC routing to physical flat.
[ 0.008491] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.041430] CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 04
[ 0.146057] Performance Events: PEBS fmt1+, erratum AAJ80 worked around, Nehalem events, Intel PMU driver.
[ 0.146061] ... version: 3
[ 0.146061] ... bit width: 48
[ 0.146062] ... generic registers: 4
[ 0.146063] ... value mask: 0000ffffffffffff
[ 0.146064] ... max period: 000000007fffffff
[ 0.146065] ... fixed-purpose events: 3
[ 0.146065] ... event mask: 000000070000000f
[ 0.166297] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.192636] Booting Node 0, Processors #1
[ 0.192638] smpboot cpu 1: start_ip = 9a000
[ 0.305842] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.325715] #2
[ 0.325716] smpboot cpu 2: start_ip = 9a000
[ 0.438934] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.458778] #3
[ 0.458779] smpboot cpu 3: start_ip = 9a000
[ 0.571996] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.578530] Brought up 4 CPUs
[ 0.578532] Total of 4 processors activated (28010.90 BogoMIPS).
[ 0.580114] devtmpfs: initialized
[ 0.580803] PM: Registering ACPI NVS region at dfee0000 (4096 bytes)
[ 0.581343] print_constraints: dummy:
[ 0.581392] NET: Registered protocol family 16
[ 0.581455] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.581457] ACPI: bus type pci registered
[ 0.581541] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.581543] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.586719] PCI: Using configuration type 1 for base access
[ 0.587041] bio: create slab <bio-0> at 0
[ 0.587110] ACPI: Added _OSI(Module Device)
[ 0.587111] ACPI: Added _OSI(Processor Device)
[ 0.587112] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.587113] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.587538] ACPI: EC: Look up EC in DSDT
[ 0.589316] ACPI Warning: Incorrect checksum in table [TAMG] - 0x50, should be 0x4F (20110623/tbutils-314)
[ 0.589643] ACPI: Interpreter enabled
[ 0.589645] ACPI: (supports S0 S3 S4 S5)
[ 0.589654] ACPI: Using IOAPIC for interrupt routing
[ 0.591717] ACPI: No dock devices found.
[ 0.591718] HEST: Table not found.
[ 0.591720] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.591751] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.591811] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.591812] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.591814] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.591815] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.591816] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.591826] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600
[ 0.591861] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.591864] pci 0000:00:00.0: PME# disabled
[ 0.591882] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
[ 0.591914] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.591916] pci 0000:00:03.0: PME# disabled
[ 0.591935] pci 0000:00:10.0: [8086:3425] type 0 class 0x000800
[ 0.591977] pci 0000:00:10.1: [8086:3426] type 0 class 0x000800
[ 0.592017] pci 0000:00:11.0: [8086:3427] type 0 class 0x000800
[ 0.592059] pci 0000:00:11.1: [8086:3428] type 0 class 0x000800
[ 0.592099] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800
[ 0.592107] pci 0000:00:13.0: reg 10: [mem 0xfbfff000-0xfbffffff]
[ 0.592137] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 0.592139] pci 0000:00:13.0: PME# disabled
[ 0.592150] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
[ 0.592193] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
[ 0.592236] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
[ 0.592279] pci 0000:00:15.0: [8086:342f] type 0 class 0x000800
[ 0.592321] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.592355] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
[ 0.592389] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.592423] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
[ 0.592456] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.592490] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
[ 0.592531] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.592548] pci 0000:00:1a.7: reg 10: [mem 0xfbffe000-0xfbffe3ff]
[ 0.592607] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.592610] pci 0000:00:1a.7: PME# disabled
[ 0.592628] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.592639] pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
[ 0.592682] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.592684] pci 0000:00:1b.0: PME# disabled
[ 0.592699] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.592742] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.592744] pci 0000:00:1c.0: PME# disabled
[ 0.592761] pci 0000:00:1c.1: [8086:3a42] type 1 class 0x000604
[ 0.592803] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.592806] pci 0000:00:1c.1: PME# disabled
[ 0.592826] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.592860] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
[ 0.592893] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.592927] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
[ 0.592961] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.592994] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
[ 0.593035] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.593052] pci 0000:00:1d.7: reg 10: [mem 0xfbffd000-0xfbffd3ff]
[ 0.593111] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.593114] pci 0000:00:1d.7: PME# disabled
[ 0.593128] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.593171] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 0.593239] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.593241] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.593270] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.593282] pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907]
[ 0.593287] pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803]
[ 0.593293] pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707]
[ 0.593299] pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603]
[ 0.593305] pci 0000:00:1f.2: reg 20: [io 0xf500-0xf50f]
[ 0.593310] pci 0000:00:1f.2: reg 24: [io 0xf400-0xf40f]
[ 0.593338] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.593350] pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit]
[ 0.593366] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.593390] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.593401] pci 0000:00:1f.5: reg 10: [io 0xf200-0xf207]
[ 0.593407] pci 0000:00:1f.5: reg 14: [io 0xf100-0xf103]
[ 0.593413] pci 0000:00:1f.5: reg 18: [io 0xf000-0xf007]
[ 0.593419] pci 0000:00:1f.5: reg 1c: [io 0xef00-0xef03]
[ 0.593424] pci 0000:00:1f.5: reg 20: [io 0xee00-0xee0f]
[ 0.593430] pci 0000:00:1f.5: reg 24: [io 0xed00-0xed0f]
[ 0.593487] pci 0000:01:00.0: [10de:05e2] type 0 class 0x000300
[ 0.593494] pci 0000:01:00.0: reg 10: [mem 0xf8000000-0xf8ffffff]
[ 0.593502] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.593510] pci 0000:01:00.0: reg 1c: [mem 0xf6000000-0xf7ffffff 64bit]
[ 0.593516] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.593521] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.593549] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.593551] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 0.593553] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff]
[ 0.593557] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.593587] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.593638] pci 0000:03:00.0: [197b:2363] type 0 class 0x000106
[ 0.593715] pci 0000:03:00.0: reg 24: [mem 0xfbdfe000-0xfbdfffff]
[ 0.593752] pci 0000:03:00.0: PME# supported from D3hot
[ 0.593756] pci 0000:03:00.0: PME# disabled
[ 0.593780] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.593801] pci 0000:03:00.1: reg 10: [io 0xbf00-0xbf07]
[ 0.593813] pci 0000:03:00.1: reg 14: [io 0xbe00-0xbe03]
[ 0.593824] pci 0000:03:00.1: reg 18: [io 0xbd00-0xbd07]
[ 0.593836] pci 0000:03:00.1: reg 1c: [io 0xbc00-0xbc03]
[ 0.593847] pci 0000:03:00.1: reg 20: [io 0xbb00-0xbb0f]
[ 0.593916] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.593918] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.593921] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.593948] pci 0000:04:01.0: [1102:0004] type 0 class 0x000401
[ 0.593962] pci 0000:04:01.0: reg 10: [io 0xcf00-0xcf1f]
[ 0.594015] pci 0000:04:01.0: supports D1 D2
[ 0.594027] pci 0000:04:01.1: [1102:7003] type 0 class 0x000980
[ 0.594040] pci 0000:04:01.1: reg 10: [io 0xce00-0xce07]
[ 0.594093] pci 0000:04:01.1: supports D1 D2
[ 0.594105] pci 0000:04:01.2: [1102:4001] type 0 class 0x000c00
[ 0.594119] pci 0000:04:01.2: reg 10: [mem 0xfbeff000-0xfbeff7ff]
[ 0.594127] pci 0000:04:01.2: reg 14: [mem 0xfbef8000-0xfbefbfff]
[ 0.594177] pci 0000:04:01.2: supports D1 D2
[ 0.594178] pci 0000:04:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.594181] pci 0000:04:01.2: PME# disabled
[ 0.594221] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.594224] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.594226] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.594230] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.594232] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.594233] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.594235] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.594236] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
[ 0.594250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.594335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.594351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.594375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.594421] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.594423] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.594424] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.601329] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.601355] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.601380] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.601406] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.601431] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.601456] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.601481] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.601506] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.601562] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.601565] vgaarb: loaded
[ 0.601565] vgaarb: bridge control possible 0000:01:00.0
[ 0.601611] PCI: Using ACPI for IRQ routing
[ 0.602749] PCI: Discovered peer bus 3f
[ 0.602767] pci 0000:3f:00.0: [8086:2c41] type 0 class 0x000600
[ 0.602779] pci 0000:3f:00.1: [8086:2c01] type 0 class 0x000600
[ 0.602792] pci 0000:3f:02.0: [8086:2c10] type 0 class 0x000600
[ 0.602803] pci 0000:3f:02.1: [8086:2c11] type 0 class 0x000600
[ 0.602815] pci 0000:3f:03.0: [8086:2c18] type 0 class 0x000600
[ 0.602826] pci 0000:3f:03.1: [8086:2c19] type 0 class 0x000600
[ 0.602837] pci 0000:3f:03.4: [8086:2c1c] type 0 class 0x000600
[ 0.602848] pci 0000:3f:04.0: [8086:2c20] type 0 class 0x000600
[ 0.602860] pci 0000:3f:04.1: [8086:2c21] type 0 class 0x000600
[ 0.602871] pci 0000:3f:04.2: [8086:2c22] type 0 class 0x000600
[ 0.602882] pci 0000:3f:04.3: [8086:2c23] type 0 class 0x000600
[ 0.602894] pci 0000:3f:05.0: [8086:2c28] type 0 class 0x000600
[ 0.602904] pci 0000:3f:05.1: [8086:2c29] type 0 class 0x000600
[ 0.602915] pci 0000:3f:05.2: [8086:2c2a] type 0 class 0x000600
[ 0.602926] pci 0000:3f:05.3: [8086:2c2b] type 0 class 0x000600
[ 0.602938] pci 0000:3f:06.0: [8086:2c30] type 0 class 0x000600
[ 0.602950] pci 0000:3f:06.1: [8086:2c31] type 0 class 0x000600
[ 0.602961] pci 0000:3f:06.2: [8086:2c32] type 0 class 0x000600
[ 0.602972] pci 0000:3f:06.3: [8086:2c33] type 0 class 0x000600
[ 0.603233] PCI: pci_cache_line_size set to 64 bytes
[ 0.603319] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.603320] reserve RAM buffer: 00000000dfde0000 - 00000000dfffffff
[ 0.603384] NetLabel: Initializing
[ 0.603385] NetLabel: domain hash size = 128
[ 0.603386] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.603393] NetLabel: unlabeled traffic allowed by default
[ 0.603400] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.603403] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.603406] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.618592] Switching to clocksource hpet
[ 0.621786] Switched to NOHz mode on CPU #0
[ 0.621823] pnp: PnP ACPI init
[ 0.621829] ACPI: bus type pnp registered
[ 0.621868] pnp 00:00: [bus 00-3f]
[ 0.621869] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.621870] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.621873] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.621874] Switched to NOHz mode on CPU #1
[ 0.621875] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.621877] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.621878] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[ 0.621894] Switched to NOHz mode on CPU #3
[ 0.621900] Switched to NOHz mode on CPU #2
[ 0.621902] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.621940] pnp 00:01: [io 0x0010-0x001f]
[ 0.621941] pnp 00:01: [io 0x0022-0x003f]
[ 0.621942] pnp 00:01: [io 0x0044-0x005f]
[ 0.621943] pnp 00:01: [io 0x0062-0x0063]
[ 0.621944] pnp 00:01: [io 0x0065-0x006f]
[ 0.621945] pnp 00:01: [io 0x0074-0x007f]
[ 0.621946] pnp 00:01: [io 0x0091-0x0093]
[ 0.621947] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.621948] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.621949] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.621950] pnp 00:01: [io 0x0290-0x029f]
[ 0.621951] pnp 00:01: [io 0x0800-0x087f]
[ 0.621952] pnp 00:01: [io 0x0290-0x0294]
[ 0.621957] pnp 00:01: [io 0x0880-0x088f]
[ 0.621996] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.621998] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.621999] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.622001] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.622002] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.622004] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.622010] pnp 00:02: [dma 4]
[ 0.622011] pnp 00:02: [io 0x0000-0x000f]
[ 0.622012] pnp 00:02: [io 0x0080-0x0090]
[ 0.622013] pnp 00:02: [io 0x0094-0x009f]
[ 0.622014] pnp 00:02: [io 0x00c0-0x00df]
[ 0.622029] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.622054] pnp 00:03: [irq 0 disabled]
[ 0.622059] pnp 00:03: [irq 8]
[ 0.622060] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.622078] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.622092] pnp 00:04: [io 0x0070-0x0073]
[ 0.622108] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.622112] pnp 00:05: [io 0x0061]
[ 0.622127] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.622132] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.622135] pnp 00:06: [irq 13]
[ 0.622152] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.622220] pnp 00:07: [io 0x0400-0x04cf]
[ 0.622221] pnp 00:07: [io 0x04d2-0x04ff]
[ 0.622254] system 00:07: [io 0x0400-0x04cf] has been reserved
[ 0.622255] system 00:07: [io 0x04d2-0x04ff] has been reserved
[ 0.622257] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.622352] pnp 00:08: [mem 0xf0000000-0xf3ffffff]
[ 0.622390] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.622392] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.622472] pnp 00:09: [mem 0x000d3000-0x000d3fff]
[ 0.622473] pnp 00:09: [mem 0x000f0000-0x000f7fff]
[ 0.622474] pnp 00:09: [mem 0x000f8000-0x000fbfff]
[ 0.622476] pnp 00:09: [mem 0x000fc000-0x000fffff]
[ 0.622477] pnp 00:09: [mem 0xdfee0000-0xdfeeffff]
[ 0.622478] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.622479] pnp 00:09: [mem 0x00100000-0xdfedffff]
[ 0.622480] pnp 00:09: [mem 0xdfef0000-0xdfefffff]
[ 0.622481] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.622483] pnp 00:09: [mem 0xfed10000-0xfed1dfff]
[ 0.622484] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
[ 0.622485] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.622486] pnp 00:09: [mem 0xffb00000-0xffb7ffff]
[ 0.622487] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.622488] pnp 00:09: [mem 0x000e0000-0x000effff]
[ 0.622530] system 00:09: [mem 0x000d3000-0x000d3fff] has been reserved
[ 0.622532] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.622534] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.622535] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.622536] system 00:09: [mem 0xdfee0000-0xdfeeffff] could not be reserved
[ 0.622538] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.622539] system 00:09: [mem 0x00100000-0xdfedffff] could not be reserved
[ 0.622541] system 00:09: [mem 0xdfef0000-0xdfefffff] has been reserved
[ 0.622542] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.622544] system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.622545] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.622546] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.622549] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.622550] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.622552] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[ 0.622554] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.622564] pnp 00:0a: [mem 0xffb80000-0xffbfffff]
[ 0.622586] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.622589] pnp: PnP ACPI: found 11 devices
[ 0.622590] ACPI: ACPI bus type pnp unregistered
[ 0.627833] PCI: max bus depth: 1 pci_try_num: 2
[ 0.627862] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.627864] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4200000-0xf43fffff]
[ 0.627866] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.627867] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.627869] pci 0000:01:00.0: BAR 6: assigned [mem 0xf9000000-0xf907ffff pref]
[ 0.627871] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.627873] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 0.627876] pci 0000:00:03.0: bridge window [mem 0xf6000000-0xf9ffffff]
[ 0.627879] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.627882] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.627884] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.627887] pci 0000:00:1c.0: bridge window [mem 0xf4200000-0xf43fffff]
[ 0.627890] pci 0000:00:1c.0: bridge window [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.627895] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.627897] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.627900] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.627903] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.627907] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.627909] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.627912] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.627923] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.627925] pci 0000:00:03.0: setting latency timer to 64
[ 0.627929] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.627931] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.627935] pci 0000:00:1c.0: setting latency timer to 64
[ 0.627939] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.627942] pci 0000:00:1c.1: setting latency timer to 64
[ 0.627946] pci 0000:00:1e.0: setting latency timer to 64
[ 0.627948] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.627950] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.627951] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.627952] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.627953] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
[ 0.627955] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.627956] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf9ffffff]
[ 0.627957] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.627958] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.627960] pci_bus 0000:02: resource 1 [mem 0xf4200000-0xf43fffff]
[ 0.627961] pci_bus 0000:02: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.627962] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.627963] pci_bus 0000:03: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.627965] pci_bus 0000:03: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.627966] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.627967] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.627968] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.627970] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.627971] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.627972] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.627973] pci_bus 0000:04: resource 8 [mem 0xdff00000-0xfebfffff]
[ 0.627975] pci_bus 0000:3f: resource 0 [io 0x0000-0xffff]
[ 0.627976] pci_bus 0000:3f: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.628018] NET: Registered protocol family 2
[ 0.628169] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.628790] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.629695] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.629794] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.629796] TCP reno registered
[ 0.629804] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.629827] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.629947] NET: Registered protocol family 1
[ 0.655246] pci 0000:01:00.0: Boot video device
[ 0.655272] PCI: CLS 64 bytes, default 64
[ 0.655299] Unpacking initramfs...
[ 0.676318] Freeing initrd memory: 2460k freed
[ 0.676481] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.676483] Placing 64MB software IO TLB between ffff8800dbdd8000 - ffff8800dfdd8000
[ 0.676484] software IO TLB at phys 0xdbdd8000 - 0xdfdd8000
[ 0.676753] audit: initializing netlink socket (disabled)
[ 0.676760] type=2000 audit(1325470737.523:1): initialized
[ 0.685226] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.702418] VFS: Disk quotas dquot_6.5.2
[ 0.702502] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.702602] msgmni has been set to 11935
[ 0.702727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.702748] io scheduler noop registered
[ 0.702749] io scheduler deadline registered
[ 0.702777] io scheduler cfq registered (default)
[ 0.702886] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.702915] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.702959] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.702985] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.703071] intel_idle: MWAIT substates: 0x1120
[ 0.703076] intel_idle: v0.4 model 0x1A
[ 0.703076] intel_idle: lapic_timer_reliable_states 0x2
[ 0.703112] ERST: Table is not found!
[ 0.703113] GHES: HEST is not enabled!
[ 0.703152] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.914851] Linux agpgart interface v0.103
[ 0.914896] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.947661] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.947662] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.194253] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.194313] mousedev: PS/2 mouse device common for all mice
[ 1.194351] rtc_cmos 00:04: RTC can wake from S4
[ 1.194422] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.194442] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.194501] cpuidle: using governor ladder
[ 1.194588] cpuidle: using governor menu
[ 1.194721] TCP cubic registered
[ 1.194722] NET: Registered protocol family 17
[ 1.194727] Registering the dns_resolver key type
[ 1.194825] PM: Hibernation image not present or could not be loaded.
[ 1.194828] registered taskstats version 1
[ 1.203170] rtc_cmos 00:04: setting system clock to 2012-01-02 02:18:58 UTC (1325470738)
[ 1.203191] Initializing network drop monitor service
[ 1.204341] Freeing unused kernel memory: 712k freed
[ 1.204407] Write protecting the kernel read-only data: 8192k
[ 1.208590] Freeing unused kernel memory: 1968k freed
[ 1.210319] Freeing unused kernel memory: 704k freed
[ 1.216473] udevd[48]: starting version 175
[ 1.236807] usbcore: registered new interface driver usbfs
[ 1.236822] usbcore: registered new interface driver hub
[ 1.238401] usbcore: registered new device driver usb
[ 1.244590] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.244614] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.244633] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.244635] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.244661] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.244683] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.244886] SCSI subsystem initialized
[ 1.248598] libata version 3.00 loaded.
[ 1.248907] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.248919] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbffe000
[ 1.258212] ahci 0000:03:00.0: version 3.0
[ 1.258223] ahci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.258371] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.264124] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.264260] hub 1-0:1.0: USB hub found
[ 1.264262] hub 1-0:1.0: 6 ports detected
[ 1.264324] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.264486] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.264488] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.264493] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.264510] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.268373] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.268382] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbffd000
[ 1.270815] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.270818] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.270823] ahci 0000:03:00.0: setting latency timer to 64
[ 1.271101] scsi0 : ahci
[ 1.271266] scsi1 : ahci
[ 1.271323] ata1: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 17
[ 1.271326] ata2: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 17
[ 1.271450] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.271466] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.271791] scsi2 : pata_jmicron
[ 1.271856] scsi3 : pata_jmicron
[ 1.272130] ata3: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 18
[ 1.272131] ata4: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 18
[ 1.284076] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.284285] hub 2-0:1.0: USB hub found
[ 1.284289] hub 2-0:1.0: 6 ports detected
[ 1.284411] ata_piix 0000:00:1f.2: version 2.13
[ 1.284420] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.284423] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.284446] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.284832] scsi4 : ata_piix
[ 1.284983] scsi5 : ata_piix
[ 1.285245] ata5: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
[ 1.285249] ata6: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
[ 1.285311] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.285316] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.285340] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.285481] scsi6 : ata_piix
[ 1.285599] scsi7 : ata_piix
[ 1.285809] ata7: SATA max UDMA/133 cmd 0xf200 ctl 0xf100 bmdma 0xee00 irq 19
[ 1.285812] ata8: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xee08 irq 19
[ 1.285851] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.285856] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.285858] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.285863] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.285888] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 1.285983] hub 3-0:1.0: USB hub found
[ 1.285986] hub 3-0:1.0: 2 ports detected
[ 1.286036] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.286040] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.286043] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.286047] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.286073] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 1.286198] hub 4-0:1.0: USB hub found
[ 1.286200] hub 4-0:1.0: 2 ports detected
[ 1.286243] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.286247] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.286249] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.286253] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.286272] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 1.286397] hub 5-0:1.0: USB hub found
[ 1.286399] hub 5-0:1.0: 2 ports detected
[ 1.286439] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.286443] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.286444] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.286448] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.286467] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 1.286599] hub 6-0:1.0: USB hub found
[ 1.286601] hub 6-0:1.0: 2 ports detected
[ 1.286644] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.286648] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.286650] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.286653] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.286672] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 1.286804] hub 7-0:1.0: USB hub found
[ 1.286807] hub 7-0:1.0: 2 ports detected
[ 1.286849] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.286852] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.286854] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.286858] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.286877] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 1.286981] hub 8-0:1.0: USB hub found
[ 1.286984] hub 8-0:1.0: 2 ports detected
[ 1.484459] ata3.00: ATA-6: ST3120022A, 3.54, max UDMA/100
[ 1.484461] ata3.00: 234441648 sectors, multi 16: LBA48
[ 1.501173] ata3.00: configured for UDMA/100
[ 1.590216] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.614302] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.676643] Refined TSC clocksource calibration: 3499.999 MHz.
[ 1.676647] Switching to clocksource tsc
[ 1.766472] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.773280] ata7.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB01, max UDMA/100
[ 1.786597] ata7.00: configured for UDMA/100
[ 1.809737] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.810265] ata2.15: Port Multiplier 1.2, 0x1458:0x0322 r0, 5 ports, feat 0x5/0xf
[ 1.810976] ata2.00: hard resetting link
[ 1.889576] usb 2-5: new high speed USB device number 2 using ehci_hcd
[ 1.936827] ata6.00: SATA link down (SStatus 0 SControl 300)
[ 1.936838] ata6.01: SATA link down (SStatus 0 SControl 300)
[ 2.089251] ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.089261] ata5.01: SATA link down (SStatus 0 SControl 300)
[ 2.096111] ata5.00: ATA-8: OCZ-VERTEX, 1.7, max UDMA/133
[ 2.096115] ata5.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 2.109462] ata5.00: configured for UDMA/133
[ 2.255510] usb 4-2: new full speed USB device number 2 using uhci_hcd
[ 2.295899] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 2.295934] ata2.01: hard resetting link
[ 2.648047] usb 5-1: new full speed USB device number 2 using uhci_hcd
[ 3.083860] usb 5-2: new full speed USB device number 3 using uhci_hcd
[ 3.316806] ata2.01: failed to resume link (SControl 0)
[ 3.317319] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 3.317380] ata2.02: hard resetting link
[ 4.338137] ata2.02: failed to resume link (SControl 0)
[ 4.338662] ata2.02: SATA link down (SStatus 0 SControl 0)
[ 4.338722] ata2.03: hard resetting link
[ 5.359475] ata2.03: failed to resume link (SControl 0)
[ 5.359998] ata2.03: SATA link down (SStatus 0 SControl 0)
[ 5.360055] ata2.04: hard resetting link
[ 6.380797] ata2.04: failed to resume link (SControl 0)
[ 6.381314] ata2.04: SATA link down (SStatus 0 SControl 0)
[ 6.381673] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA/133
[ 6.381676] ata2.00: 1953525168 sectors, multi 1: LBA48
[ 6.382013] ata2.00: configured for UDMA/133
[ 6.382079] ata2: EH complete
[ 6.382283] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 6.382656] scsi 2:0:0:0: Direct-Access ATA ST3120022A 3.54 PQ: 0 ANSI: 5
[ 6.545516] scsi 4:0:0:0: Direct-Access ATA OCZ-VERTEX 1.7 PQ: 0 ANSI: 5
[ 6.546466] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB01 PQ: 0 ANSI: 5
[ 6.552360] input: Razer DeathAdder as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input0
[ 6.553055] generic-usb 0003:1532:0007.0001: input,hidraw0: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:00:1a.1-2/input0
[ 6.553485] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.553501] sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 6.553509] sd 1:0:0:0: [sda] Write Protect is off
[ 6.553511] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.553515] sd 4:0:0:0: [sdc] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 6.553521] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6.553525] sd 2:0:0:0: [sdb] Write Protect is off
[ 6.553526] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.553537] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.553546] sd 4:0:0:0: [sdc] Write Protect is off
[ 6.553548] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.553557] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.553849] sdc: sdc1 sdc2
[ 6.554225] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 6.554453] sdb: sdb1
[ 6.554754] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 6.558086] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X6 Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input1
[ 6.558164] generic-usb 0003:045E:074B.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X6 Keyboard] on usb-0000:00:1a.2-1/input0
[ 6.571094] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X6 Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input2
[ 6.571227] generic-usb 0003:045E:074B.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae SiderWinderTM X6 Keyboard] on usb-0000:00:1a.2-1/input1
[ 6.575058] input: Saitek Saitek X52 Pro Flight Control System as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input3
[ 6.575127] generic-usb 0003:06A3:0762.0004: input,hidraw3: USB HID v1.11 Joystick [Saitek Saitek X52 Pro Flight Control System] on usb-0000:00:1a.2-2/input0
[ 6.575136] usbcore: registered new interface driver usbhid
[ 6.575137] usbhid: USB HID core driver
[ 6.592248] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 6.592901] sd 1:0:0:0: [sda] Attached SCSI disk
[ 6.597056] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.597058] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.597252] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 7.060957] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 8.214901] udevd[318]: starting version 175
[ 8.417721] cfg80211: Calling CRDA to update world regulatory domain
[ 8.474546] vboxdrv: Found 4 processor cores.
[ 8.474781] VBoxDrv: dbg - g_abExecMemory=ffffffffa0254be0
[ 8.475509] vboxdrv: fAsync=0 offMin=0x6aa offMax=0x371ee
[ 8.475550] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 8.475551] vboxdrv: Successfully loaded version 4.1.8_OSE (interface 0x00190000).
[ 8.555582] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 8.555586] ACPI: Power Button [PWRB]
[ 8.557961] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 8.557964] ACPI: Power Button [PWRF]
[ 8.566671] wmi: Mapper loaded
[ 8.577751] ACPI: acpi_idle yielding to intel_idle
[ 8.687101] EDAC MC: Ver: 2.1.0
[ 8.688194] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
[ 8.688212] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
[ 8.688214] EDAC i7core: Driver loaded.
[ 8.808362] firewire_ohci 0000:04:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 8.832065] iTCO_vendor_support: vendor-support=0
[ 8.836952] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8.837114] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 8.837188] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 8.859269] firewire_ohci: Added fw-ohci device 0000:04:01.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x0
[ 8.859327] snd_emu10k1 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.061435] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.061497] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 9.061513] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 9.064348] [drm] Initialized drm 1.1.0 20060810
[ 9.069905] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 9.133606] gameport gameport0: EMU10K1 is pci0000:04:01.1/gameport0, io 0xce00, speed 960kHz
[ 9.273231] MXM: GUID detected in BIOS
[ 9.273251] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.273254] nouveau 0000:01:00.0: setting latency timer to 64
[ 9.274334] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a0100a2)
[ 9.276949] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 9.342766] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 9.342768] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 9.342769] [drm] nouveau 0000:01:00.0: Bios version 62.00.0e.00
[ 9.342770] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 9.342772] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 9.342773] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04000320 00000028
[ 9.342774] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000322 00020030
[ 9.342775] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011310 00000028
[ 9.342776] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00020030
[ 9.342778] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c1c020
[ 9.342779] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 9.342781] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 9.342782] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[ 9.342783] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 9.342785] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 9.342786] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 9.342787] [drm] nouveau 0000:01:00.0: 5: 0x00000360: type 0x60 idx 5 tag 0xff
[ 9.342790] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCB50
[ 9.357114] hda_codec: ALC889A: BIOS auto-probing.
[ 9.361607] firewire_core: created device fw0: GUID 00023c003002f21a, S400
[ 9.365650] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCDFD
[ 9.365780] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 9.368487] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE261
[ 9.368493] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE362
[ 9.369497] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE3FA
[ 9.369498] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE45F
[ 9.389551] [drm] nouveau 0000:01:00.0: 0xE45F: Condition still not met after 20ms, skipping following opcodes
[ 9.665649] adt7475 1-002e: ADT7473 device, revision 1
[ 9.675427] [drm] nouveau 0000:01:00.0: Detected monitoring device: adt7473
[ 9.675429] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 9.675432] [drm] nouveau 0000:01:00.0: 0: memory 100MHz core 300MHz shader 600MHz voltage 1030mV fanspeed 100% timing 0
[ 9.675434] [drm] nouveau 0000:01:00.0: 2: memory 300MHz core 400MHz shader 800MHz voltage 1060mV fanspeed 100% timing 1
[ 9.675436] [drm] nouveau 0000:01:00.0: 3: memory 999MHz core 576MHz shader 1242MHz voltage 1060mV fanspeed 100% timing 3
[ 9.675450] [drm] nouveau 0000:01:00.0: c: memory 297MHz core 399MHz shader 810MHz voltage 1060mV
[ 9.678857] [TTM] Zone kernel: Available graphics memory: 3057164 kiB.
[ 9.678860] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 9.678862] [TTM] Initializing pool allocator.
[ 9.678872] [drm] nouveau 0000:01:00.0: Detected 896MiB VRAM
[ 9.678877] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 9.678888] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 9.681588] cfg80211: World regulatory domain updated:
[ 9.681589] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.681591] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.681593] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.681594] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.681595] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.681597] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.681717] cfg80211: Calling CRDA for country: BO
[ 9.683156] cfg80211: Regulatory domain changed to country: BO
[ 9.683157] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.683159] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 9.683160] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 9.707726] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 9.707727] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 9.709120] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 9.709121] [drm] No driver support for vblank timestamp query.
[ 9.963180] [drm] nouveau 0000:01:00.0: allocated 1920x1200 fb: 0x330000, bo ffff880194296c00
[ 9.963227] fbcon: nouveaufb (fb0) is primary device
[ 10.031223] Console: switching to colour frame buffer device 160x64
[ 10.032858] fb0: nouveaufb frame buffer device
[ 10.032859] drm: registered panic notifier
[ 10.032863] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 10.363019] usb 2-5: reset high speed USB device number 2 using ehci_hcd
[ 10.549175] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.549326] Registered led device: rt2800usb-phy0::radio
[ 10.549335] Registered led device: rt2800usb-phy0::assoc
[ 10.549344] Registered led device: rt2800usb-phy0::quality
[ 10.549695] usbcore: registered new interface driver rt2800usb
[ 10.855045] EXT4-fs (sda6): re-mounted. Opts: user_xattr
[ 10.961467] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 11.049063] fuse init (API version 7.17)
[ 11.585989] Adding 11719380k swap on /dev/sda7. Priority:-1 extents:1 across:11719380k
[ 27.164157] wlan0: authenticate with 1c:bd:b9:b3:34:e4 (try 1)
[ 27.165636] wlan0: authenticated
[ 27.180851] wlan0: associate with 1c:bd:b9:b3:34:e4 (try 1)
[ 27.184251] wlan0: RX AssocResp from 1c:bd:b9:b3:34:e4 (capab=0xc31 status=0 aid=1)
[ 27.184255] wlan0: associated
[ 27.207965] cfg80211: Calling CRDA for country: GB
[ 27.209810] cfg80211: Regulatory domain changed to country: GB
[ 27.209811] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.209813] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 27.209814] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 27.209816] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 27.209817] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 27.291978] padlock_aes: VIA PadLock not detected.
[ 27.368007] Intel AES-NI instructions are not detected.
[ 29.411662] EXT4-fs (sda6): re-mounted. Opts: user_xattr,commit=0
[ 29.521137] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 32.597543] NET: Registered protocol family 10
[ 43.564588] wlan0: no IPv6 routers present
[ 66.680861] cfg80211: Calling CRDA for country: BO
[ 66.682251] cfg80211: Current regulatory domain intersected:
[ 66.682252] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 66.682254] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) As you can see, first it sets BO, then at a later point it sets GB. The last attempt to switch over to BO is not successful, as it leaves me with the restrictions from GB (only 20dBm transmit power 
)
Last edited by wims (2012-01-02 01:56:49)
Offline
#2 2012-01-02 03:11:25
- cfr
- Member
- From: Cymru
- Registered: 2011-11-27
- Posts: 7,156
Re: Wireless regulatory domain set to GB, even tho BO have been selected
Maybe https://bbs.archlinux.org/viewtopic.php?id=124574 has something which might help?
CLI Paste | How To Ask Questions
Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L
Offline
#3 2012-01-02 03:41:07
- wims
- Member
- Registered: 2009-05-26
- Posts: 15
Re: Wireless regulatory domain set to GB, even tho BO have been selected
It's a good suggestion, however, the card works awesome in one of my other linux installations (not arch)
Offline
#4 2012-01-12 05:39:20
- wims
- Member
- Registered: 2009-05-26
- Posts: 15
Re: Wireless regulatory domain set to GB, even tho BO have been selected
After doing some troubleshooting I have discovered that the GB regdom is set when I connect to my wireless accesspoint with wicd. Wicd uses wpa_supplicant, I have set COUNTRY=BO in wpa_supplicant.conf, but it didnt help. If I dont connect I get to use my wireless adapter with the BO regulatory settings. Its a big mystery, especially considering the fact that I'm not in the GB, havent been there with this computer and I didnt find any config files where this locale was set either. Does anybody have an idea?
Last edited by wims (2012-01-12 05:40:41)
Offline