You are not logged in.
Hi,
Wireless has stopped working after previous kernel upgrade. I have disabled ipv6 and 802.11n mode but no luck getting it work. I have been reading but can't figure out. Thanks.
Linux arch 3.1.7-1-ARCH #1 SMP PREEMPT Wed Jan 4 08:11:16 CET 2012 x86_64 Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz GenuineIntel GNU/Linux
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4)
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4)
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4)
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [8086:0084]
0d:00.0 SD Host controller [0805]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 08)
[ 13.445903] wlan0: authenticate with 00:21:91:fe:1d:eb (try 1)
[ 13.448339] wlan0: authenticated
[ 13.476419] wlan0: associate with 00:21:91:fe:1d:eb (try 1)
[ 13.480087] wlan0: RX AssocResp from 00:21:91:fe:1d:eb (capab=0x431 status=0 aid=2)
[ 13.480096] wlan0: associated
[ 24.444550] wlan0: no IPv6 routers present
[ 44.668143] wlan0: deauthenticating from 00:21:91:fe:1d:eb by local choice (reason=3)
[ 48.666361] wlan0: authenticate with 00:21:91:fe:1d:eb (try 1)
[ 48.668620] wlan0: authenticated
[ 48.697526] wlan0: associate with 00:21:91:fe:1d:eb (try 1)
[ 48.700172] wlan0: RX ReassocResp from 00:21:91:fe:1d:eb (capab=0x431 status=0 aid=2)
[ 48.700180] wlan0: associated
[ 80.606726] wlan0: deauthenticating from 00:21:91:fe:1d:eb by local choice (reason=3)
[ 84.588353] wlan0: authenticate with 00:21:91:fe:1d:eb (try 1)
[ 84.590765] wlan0: authenticated
[ 84.603499] wlan0: associate with 00:21:91:fe:1d:eb (try 1)
[ 84.606799] wlan0: RX ReassocResp from 00:21:91:fe:1d:eb (capab=0x431 status=0 aid=2)
[ 84.606809] wlan0: associated
[ 116.565739] wlan0: deauthenticating from 00:21:91:fe:1d:eb by local choice (reason=3)
[ 120.474078] wlan0: authenticate with 00:21:91:fe:1d:eb (try 1)
[ 120.476680] wlan0: authenticated
[ 120.481391] wlan0: associate with 00:21:91:fe:1d:eb (try 1)
[ 120.483970] wlan0: RX ReassocResp from 00:21:91:fe:1d:eb (capab=0x431 status=0 aid=2)
[ 120.483981] wlan0: associated
[ 152.518578] wlan0: deauthenticating from 00:21:91:fe:1d:eb by local choice (reason=3)
Last edited by donniezazen (2012-01-07 06:43:29)
Offline
Check your kernel log for any messages related to the your wifi driver.
Offline
Check your kernel log for any messages related to the your wifi driver.
Pastebin won't let me post whole kernel log. I am posting 'grep wlan0'. Wireless network is associating and and 'deauthenticating from 00:21:91:fe:1d:eb by local choice (reason=3)'.
Offline
... in other words, stuff you have already posted.
My advice was to look for messages related to your wifi driver - i.e. the kernel module that makes your wifi device work. If you don't know the name of your driver, try lspci -k .
Offline
... in other words, stuff you have already posted.
My advice was to look for messages related to your wifi driver - i.e. the kernel module that makes your wifi device work. If you don't know the name of your driver, try lspci -k .
This is really silly. Wifi has started working again.
Offline
I've got annoying stuff after updating as well. But in my case there's a snag when loading b43 module on Linux 3.2,
b43-phy1 ERROR: FOUND UNSUPPORTED PHY (Analog 10, Type 8, Revision 1)
However, I had no problem when loading brcmsmac module while it stayed in staging branch, so I have been pitchforked into downgrading Linux kernel to 3.1.7 for now. After all, the previous ones have worked fine to me for a long time, and as the saying goes, "if it works don't fix it" ;-)
Even so, I hope to fix it as soon as possible, because I'm obviously kidding.
By the way, my problematic hardware [ lspci -knn | grep -A3 14e4 ],
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Askey Computer Corp. Device [144f:7175]
Kernel driver in use: brcmsmac
Kernel modules: brcmsmac, bcma
Thanks in advance.
Offline
I will mark this thread a solved tomorrow once i am sure eveything is working fine. I have seen udev event failed at start up once.
Network controller: Intel Corporation Centrino Wireless-N 1000
Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN
Kernel driver in use: iwlagn
Kernel modules: iwlagn
Offline
akanski - see here.
Also, you should use the testing sub-forum for issues with testing packages.
Offline
akanski - see here.
Also, you should use the testing sub-forum for issues with testing packages.
Thank you @tomk, but from what I've been able to glance at the kernel source tree, I realize that the package maintainers didn't compile brcmsmac module :-(
I suppose it's happened owing to the fact that all BRCM80211 drivers have been moved from staging branch into net subsystem right now (i.e. since Linux 3.2). So I'd prefer to wait for a new package release to solve the snag with this module rather than compiling it manually for myself. :-)
http://git.kernel.org/?p=linux/kernel/g … 8f;hb=HEAD
Last edited by akanski (2012-01-06 05:03:33)
Offline