You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2012-01-27 01:34:45
- faktorqm
- Member
- From: Argentina
- Registered: 2012-01-27
- Posts: 18
fglrx + acpi = hard problems
Hello to all, I installed one year ago chakra linux distrbution and all works fine but some things doesn't like to me, so I installed Slackware, but I don't have much time to spent compiling programs.... and compiling... so, I come back with arch + kde. The problem is the ATI video card, I have one 4870x2 PCI-e 16x 2gb gddr5 (chipset r700) and in the last installation I don't remember problems with the propietary driver. But this time the driver doesn't work.
My hardware is: motherboard gigabyte ga-ma970fxt-ud5p, phenom 2 945 black edition am3, 8gb ddr3 @1600mhz ocz reaper, hdd WD velociraptor 300gb, video card described before.
I made a fresh install last Monday and every works fine, but I want to install the ATI video propietary drivers and...
In the first step, I read five or six times this page https://wiki.archlinux.org/index.php/ATI_Catalyst and I followed the procedure according to the section called "Installing from AUR" and I made:
su root
pacman -Sy base-devel
su faktorqm
cd /home/faktorqm
wget http://aur.archlinux.org/packages/ca/ca … ils.tar.gz
wget https://aur.archlinux.org/packages/ca/c … mon.tar.gz
tar -zxvf catalyst-utils.tar.gz
tar -zxvf catalyst-daemon.tar.gz
cd catalyst-utils/
makepkg -s PKGBUILD
su root
pacman -U catalyst-utils-11.12-1-x86_64.pkg.tar.xz
su faktorqm
mv ati-driver-installer-11-12-x86.x86_64.run ../catalyst-daemon/
cd ..
cd catalyst-daemon/
makepkg -s PKGBUILD
su root
pacman -U catalyst-daemon-11.12-1-x86_64.pkg.tar.xz
su faktorqm
cd ..
No errors in this procedure.
note 0: my user is called "faktorqm"
note 1:
[faktorqm@the_missile /]$ uname -a
Linux the_missile 3.2.1-2-ARCH #1 SMP PREEMPT Mon Jan 23 12:40:01 UTC 2012 x86_64 AMD Phenom(tm) II X4 955 Processor AuthenticAMD GNU/Linux
[faktorqm@the_missile /]$ note 2:
[faktorqm@the_missile /]$ cat /etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES="fglrx"
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
#
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
#
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
#
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
#
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
#
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata filesystems usbinput"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
[faktorqm@the_missile /]$ note 4:
[faktorqm@the_missile /]$ cat /boot/grub/menu.lst
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
#
# Linux Grub
# -------------------------
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
#
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# [url]https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution[/url]
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*
# (0) Arch Linux
title Arch Linux
root (hd2,1)
kernel /boot/vmlinuz-linux root=/dev/sda2 ro nomodeset acpi=off
initrd /boot/initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd2,1)
kernel /boot/vmlinuz-linux root=/dev/sda2 ro nomodeset acpi=off
initrd /boot/initramfs-linux-fallback.img
# (2) Windows
title Windows
rootnoverify (hd0,0)
makeactive
chainloader +1
[faktorqm@the_missile /]$ note 5:
cat /var/log/boot (output stripped)
Thu Jan 26 21:45:02 2012: :: Checking fglrx [BUSY] ^[[u: Loading fglrx [FAIL][note 6:
[faktorqm@the_missile /]$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.1-2-ARCH (nobody@skynet) (gcc version 4.6.2 20111223 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jan 23 12:40:01 UTC 2012
[ 0.000000] Command line: root=/dev/sda2 ro nomodeset acpi=off
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfde0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfde0000 - 00000000bfee0000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA790FXT-UD5P/GA-MA790FXT-UD5P, BIOS F8n 01/07/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BFF00000 mask FFFFFFF00000 uncachable
[ 0.000000] 3 base 000100000000 mask FFFF00000000 write-back
[ 0.000000] 4 base 000200000000 mask FFFFC0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000240000000 aka 9216M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfde0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f4760] f4760
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfde0000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfc00000 page 2M
[ 0.000000] 00bfc00000 - 00bfde0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfde0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000
[ 0.000000] 0100000000 - 0240000000 page 1G
[ 0.000000] kernel direct mapping tables up to 240000000 @ bfddf000-bfde0000
[ 0.000000] RAMDISK: 37c7b000 - 37ff0000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000240000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000240000000
[ 0.000000] NODE_DATA [000000023fffb000 - 000000023fffffff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00240000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfde0
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] On node 0 totalpages: 2096495
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 765472 pages, LIFO batch:31
[ 0.000000] Normal zone: 20480 pages used for memmap
[ 0.000000] Normal zone: 1290240 pages, LIFO batch:31
[ 0.000000] SFI: Simple Firmware Interface v0.81 [url]http://simplefirmware.org[/url]
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: OEM00000
[ 0.000000] MPTABLE: Product ID: PROD00000000
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] Processor #2
[ 0.000000] Processor #3
[ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] Processors: 4
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfde0000 - 00000000bfee0000
[ 0.000000] PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000
[ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000
[ 0.000000] PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fc00000 s82048 r8192 d24448 u524288
[ 0.000000] pcpu-alloc: s82048 r8192 d24448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2059626
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda2 ro nomodeset acpi=off
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 590a000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[ 0.000000] Memory: 8108168k/9437184k available (4279k kernel code, 1051204k absent, 277812k reserved, 4601k data, 728k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3222.584 MHz processor.
[ 0.006669] Calibrating delay loop (skipped), value calculated using timer frequency.. 6447.71 BogoMIPS (lpj=10741946)
[ 0.006672] pid_max: default: 32768 minimum: 301
[ 0.006690] Security Framework initialized
[ 0.006693] AppArmor: AppArmor disabled by boot time parameter
[ 0.007218] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010432] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011639] Mount-cache hash table entries: 256
[ 0.011739] Initializing cgroup subsys cpuacct
[ 0.011744] Initializing cgroup subsys memory
[ 0.011751] Initializing cgroup subsys devices
[ 0.011752] Initializing cgroup subsys freezer
[ 0.011754] Initializing cgroup subsys net_cls
[ 0.011755] Initializing cgroup subsys blkio
[ 0.011776] tseg: 00bff00000
[ 0.011778] CPU: Physical Processor ID: 0
[ 0.011779] CPU: Processor Core ID: 0
[ 0.011781] mce: CPU supports 6 MCE banks
[ 0.011788] using AMD E400 aware idle routine
[ 0.012331] ftrace: allocating 16774 entries in 66 pages
[ 0.013474] ExtINT not setup in hardware but reported by MP table
[ 0.013954] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.049389] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.153335] Performance Events: AMD PMU driver.
[ 0.153338] ... version: 0
[ 0.153339] ... bit width: 48
[ 0.153340] ... generic registers: 4
[ 0.153341] ... value mask: 0000ffffffffffff
[ 0.153342] ... max period: 00007fffffffffff
[ 0.153344] ... fixed-purpose events: 0
[ 0.153345] ... event mask: 000000000000000f
[ 0.153372] System has AMD C1E enabled
[ 0.153381] Switch to broadcast mode on CPU0
[ 0.173363] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.199996] Booting Node 0, Processors #1
[ 0.199998] smpboot cpu 1: start_ip = 9a000
[ 0.296660] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.296660] Switch to broadcast mode on CPU1
[ 0.316659] #2
[ 0.316660] smpboot cpu 2: start_ip = 9a000
[ 0.413323] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.413319] Switch to broadcast mode on CPU2
[ 0.433315] #3 Ok.
[ 0.433316] smpboot cpu 3: start_ip = 9a000
[ 0.529987] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.529978] Switch to broadcast mode on CPU3
[ 0.536635] Brought up 4 CPUs
[ 0.536637] Total of 4 processors activated (25789.68 BogoMIPS).
[ 0.540078] devtmpfs: initialized
[ 0.541202] PM: Registering ACPI NVS region at bfee0000 (12288 bytes)
[ 0.541202] print_constraints: dummy:
[ 0.541202] NET: Registered protocol family 16
[ 0.543338] node 0 link 0: io port [9000, ffff]
[ 0.543340] TOM: 00000000c0000000 aka 3072M
[ 0.543342] Fam 10h mmconf [e0000000, e00fffff]
[ 0.543343] node 0 link 0: mmio [a0000, bffff]
[ 0.543345] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.543347] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.543348] node 0 link 0: mmio [e0000000, e08fffff] ==> [e0100000, e08fffff]
[ 0.543351] TOM2: 0000000240000000 aka 9216M
[ 0.543352] bus: [00, 08] on node 0 link 0
[ 0.543354] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.543355] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.543357] bus: 00 index 2 [mem 0xc0000000-0xdfffffff]
[ 0.543358] bus: 00 index 3 [mem 0xe0900000-0xffffffff]
[ 0.543359] bus: 00 index 4 [mem 0xe0100000-0xe08fffff]
[ 0.543361] bus: 00 index 5 [mem 0x240000000-0xfcffffffff]
[ 0.543369] Extended Config Space enabled on 1 nodes
[ 0.543426] PCI: Using configuration type 1 for base access
[ 0.543427] PCI: Using configuration type 1 for extended access
[ 0.543782] bio: create slab <bio-0> at 0
[ 0.543782] ACPI: Interpreter disabled.
[ 0.543782] vgaarb: loaded
[ 0.543782] PCI: Probing PCI hardware
[ 0.543782] PCI: Probing PCI hardware (bus 00)
[ 0.543782] pci 0000:00:00.0: [1002:5956] type 0 class 0x000600
[ 0.543782] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.543782] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
[ 0.543782] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.543782] pci 0000:00:02.0: PME# disabled
[ 0.543782] pci 0000:00:07.0: [1002:597d] type 1 class 0x000604
[ 0.543782] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.543782] pci 0000:00:07.0: PME# disabled
[ 0.543782] pci 0000:00:09.0: [1002:597e] type 1 class 0x000604
[ 0.543782] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.543782] pci 0000:00:09.0: PME# disabled
[ 0.543782] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
[ 0.543782] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.543782] pci 0000:00:0a.0: PME# disabled
[ 0.543782] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.543782] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.543782] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.543782] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.543782] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.543782] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.543782] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.543782] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.543782] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.543782] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.543782] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.543782] pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.543818] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.543835] pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
[ 0.543900] pci 0000:00:12.2: supports D1 D2
[ 0.543901] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.543905] pci 0000:00:12.2: PME# disabled
[ 0.543925] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.543937] pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.543995] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.544007] pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.544070] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.544088] pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.544152] pci 0000:00:13.2: supports D1 D2
[ 0.544154] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.544157] pci 0000:00:13.2: PME# disabled
[ 0.544179] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.544264] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.544279] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.544287] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.544296] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.544305] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.544313] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 0.544358] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.544378] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.544431] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.544435] pci 0000:00:14.2: PME# disabled
[ 0.544446] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.544515] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.544552] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.544564] pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
[ 0.544624] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.544636] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.544645] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.544655] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.544666] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.544682] PCI: peer root bus 00 res updated from pci conf
[ 0.544710] pci 0000:01:00.0: [10b5:8647] type 1 class 0x000604
[ 0.544718] pci 0000:01:00.0: reg 10: [mem 0xfdae0000-0xfdafffff]
[ 0.544750] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.544753] pci 0000:01:00.0: PME# disabled
[ 0.549971] pci 0000:00:02.0: PCI bridge to [bus 01-04]
[ 0.549974] pci 0000:00:02.0: bridge window [io 0xb000-0xcfff]
[ 0.549977] pci 0000:00:02.0: bridge window [mem 0xfd800000-0xfdafffff]
[ 0.549980] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.550020] pci 0000:02:04.0: [10b5:8647] type 1 class 0x000604
[ 0.550059] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
[ 0.550062] pci 0000:02:04.0: PME# disabled
[ 0.550085] pci 0000:02:08.0: [10b5:8647] type 1 class 0x000604
[ 0.550124] pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
[ 0.550127] pci 0000:02:08.0: PME# disabled
[ 0.550153] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 0.550158] pci 0000:01:00.0: bridge window [io 0xb000-0xcfff]
[ 0.550161] pci 0000:01:00.0: bridge window [mem 0xfd800000-0xfd9fffff]
[ 0.550165] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.550203] pci 0000:03:00.0: [1002:9441] type 0 class 0x000300
[ 0.550216] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.550226] pci 0000:03:00.0: reg 18: [mem 0xfd9e0000-0xfd9effff 64bit]
[ 0.550233] pci 0000:03:00.0: reg 20: [io 0xce00-0xceff]
[ 0.550246] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.550263] pci 0000:03:00.0: supports D1 D2
[ 0.550281] pci 0000:03:00.1: [1002:aa30] type 0 class 0x000403
[ 0.550294] pci 0000:03:00.1: reg 10: [mem 0xfd9fc000-0xfd9fffff 64bit]
[ 0.550338] pci 0000:03:00.1: supports D1 D2
[ 0.556639] pci 0000:02:04.0: PCI bridge to [bus 03-03]
[ 0.556643] pci 0000:02:04.0: bridge window [io 0xc000-0xcfff]
[ 0.556646] pci 0000:02:04.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.556651] pci 0000:02:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.556692] pci 0000:04:00.0: [1002:9441] type 0 class 0x000380
[ 0.556707] pci 0000:04:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.556719] pci 0000:04:00.0: reg 18: [mem 0xfd8f0000-0xfd8fffff 64bit]
[ 0.556727] pci 0000:04:00.0: reg 20: [io 0xbe00-0xbeff]
[ 0.556742] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.556762] pci 0000:04:00.0: supports D1 D2
[ 0.563305] pci 0000:02:08.0: PCI bridge to [bus 04-04]
[ 0.563310] pci 0000:02:08.0: bridge window [io 0xb000-0xbfff]
[ 0.563313] pci 0000:02:08.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.563317] pci 0000:02:08.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.563357] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 0.563369] pci 0000:05:00.0: reg 10: [io 0xae00-0xaeff]
[ 0.563388] pci 0000:05:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.563401] pci 0000:05:00.0: reg 20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
[ 0.563410] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.563436] pci 0000:05:00.0: supports D1 D2
[ 0.563437] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.563441] pci 0000:05:00.0: PME# disabled
[ 0.569972] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[ 0.569975] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 0.569977] pci 0000:00:07.0: bridge window [mem 0xfd500000-0xfd5fffff]
[ 0.569980] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.570011] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
[ 0.570022] pci 0000:06:00.0: reg 10: [io 0xee00-0xeeff]
[ 0.570042] pci 0000:06:00.0: reg 18: [mem 0xfddff000-0xfddfffff 64bit pref]
[ 0.570054] pci 0000:06:00.0: reg 20: [mem 0xfdde0000-0xfddeffff 64bit pref]
[ 0.570063] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.570089] pci 0000:06:00.0: supports D1 D2
[ 0.570090] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.570094] pci 0000:06:00.0: PME# disabled
[ 0.576638] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[ 0.576640] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
[ 0.576643] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.576646] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.576676] pci 0000:07:00.0: [197b:2363] type 0 class 0x000101
[ 0.576738] pci 0000:07:00.0: reg 24: [mem 0xfdcfe000-0xfdcfffff]
[ 0.576769] pci 0000:07:00.0: PME# supported from D3hot
[ 0.576773] pci 0000:07:00.0: PME# disabled
[ 0.576793] pci 0000:07:00.1: [197b:2363] type 0 class 0x000101
[ 0.576810] pci 0000:07:00.1: reg 10: [io 0xdf00-0xdf07]
[ 0.576820] pci 0000:07:00.1: reg 14: [io 0xde00-0xde03]
[ 0.576830] pci 0000:07:00.1: reg 18: [io 0xdd00-0xdd07]
[ 0.576840] pci 0000:07:00.1: reg 1c: [io 0xdc00-0xdc03]
[ 0.576849] pci 0000:07:00.1: reg 20: [io 0xdb00-0xdb0f]
[ 0.576899] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.576908] pci 0000:00:0a.0: PCI bridge to [bus 07-07]
[ 0.576910] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.576913] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.576916] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.576949] pci 0000:08:07.0: [1814:0601] type 0 class 0x000280
[ 0.576969] pci 0000:08:07.0: reg 10: [mem 0xfd7e0000-0xfd7effff]
[ 0.577077] pci 0000:08:0e.0: [104c:8024] type 0 class 0x000c00
[ 0.577098] pci 0000:08:0e.0: reg 10: [mem 0xfd7ff000-0xfd7ff7ff]
[ 0.577110] pci 0000:08:0e.0: reg 14: [mem 0xfd7f8000-0xfd7fbfff]
[ 0.577186] pci 0000:08:0e.0: supports D1 D2
[ 0.577187] pci 0000:08:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.577192] pci 0000:08:0e.0: PME# disabled
[ 0.577223] pci 0000:00:14.4: PCI bridge to [bus 08-08] (subtractive decode)
[ 0.577227] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 0.577231] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.577235] pci 0000:00:14.4: bridge window [mem 0xfd600000-0xfd6fffff pref]
[ 0.577237] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.577239] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.577240] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.577242] pci 0000:00:14.4: bridge window [mem 0xe0900000-0xffffffff] (subtractive decode)
[ 0.577244] pci 0000:00:14.4: bridge window [mem 0xe0100000-0xe08fffff] (subtractive decode)
[ 0.577246] pci 0000:00:14.4: bridge window [mem 0x240000000-0xfcffffffff] (subtractive decode)
[ 0.577716] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.578250] PCI: pci_cache_line_size set to 64 bytes
[ 0.578257] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.578338] Expanded resource reserved due to conflict with PCI Bus #00
[ 0.578340] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.578342] reserve RAM buffer: 00000000bfde0000 - 00000000bfffffff
[ 0.578405] NetLabel: Initializing
[ 0.578406] NetLabel: domain hash size = 128
[ 0.578407] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.578416] NetLabel: unlabeled traffic allowed by default
[ 0.582576] pnp: PnP ACPI: disabled
[ 0.583349] PCI: max bus depth: 3 pci_try_num: 4
[ 0.583381] pci 0000:03:00.0: BAR 6: assigned [mem 0xfd900000-0xfd91ffff pref]
[ 0.583383] pci 0000:02:04.0: PCI bridge to [bus 03-03]
[ 0.583385] pci 0000:02:04.0: bridge window [io 0xc000-0xcfff]
[ 0.583389] pci 0000:02:04.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.583392] pci 0000:02:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.583397] pci 0000:04:00.0: BAR 6: assigned [mem 0xfd800000-0xfd81ffff pref]
[ 0.583398] pci 0000:02:08.0: PCI bridge to [bus 04-04]
[ 0.583400] pci 0000:02:08.0: bridge window [io 0xb000-0xbfff]
[ 0.583403] pci 0000:02:08.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.583406] pci 0000:02:08.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.583410] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 0.583412] pci 0000:01:00.0: bridge window [io 0xb000-0xcfff]
[ 0.583416] pci 0000:01:00.0: bridge window [mem 0xfd800000-0xfd9fffff]
[ 0.583419] pci 0000:01:00.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.583423] pci 0000:00:02.0: PCI bridge to [bus 01-04]
[ 0.583424] pci 0000:00:02.0: bridge window [io 0xb000-0xcfff]
[ 0.583427] pci 0000:00:02.0: bridge window [mem 0xfd800000-0xfdafffff]
[ 0.583429] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.583432] pci 0000:05:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf0ffff pref]
[ 0.583433] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[ 0.583435] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 0.583437] pci 0000:00:07.0: bridge window [mem 0xfd500000-0xfd5fffff]
[ 0.583439] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.583442] pci 0000:06:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref]
[ 0.583444] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[ 0.583446] pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
[ 0.583448] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.583450] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.583453] pci 0000:00:0a.0: PCI bridge to [bus 07-07]
[ 0.583455] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.583457] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.583459] pci 0000:00:0a.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.583462] pci 0000:00:14.4: PCI bridge to [bus 08-08]
[ 0.583464] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 0.583469] pci 0000:00:14.4: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.583472] pci 0000:00:14.4: bridge window [mem 0xfd600000-0xfd6fffff pref]
[ 0.583488] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 0.583491] pci 0000:00:02.0: setting latency timer to 64
[ 0.583495] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 0.583498] pci 0000:01:00.0: setting latency timer to 64
[ 0.583503] pci 0000:02:04.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 0.583506] pci 0000:02:04.0: setting latency timer to 64
[ 0.583510] pci 0000:02:08.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 0.583513] pci 0000:02:08.0: setting latency timer to 64
[ 0.583521] pci 0000:00:07.0: PCI->APIC IRQ transform: INT A -> IRQ 19
[ 0.583523] pci 0000:00:07.0: setting latency timer to 64
[ 0.583530] pci 0000:00:09.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 0.583532] pci 0000:00:09.0: setting latency timer to 64
[ 0.583535] pci 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 0.583537] pci 0000:00:0a.0: setting latency timer to 64
[ 0.583544] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.583545] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.583547] pci_bus 0000:00: resource 6 [mem 0xc0000000-0xdfffffff]
[ 0.583548] pci_bus 0000:00: resource 7 [mem 0xe0900000-0xffffffff]
[ 0.583550] pci_bus 0000:00: resource 8 [mem 0xe0100000-0xe08fffff]
[ 0.583551] pci_bus 0000:00: resource 9 [mem 0x240000000-0xfcffffffff]
[ 0.583553] pci_bus 0000:01: resource 0 [io 0xb000-0xcfff]
[ 0.583554] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfdafffff]
[ 0.583556] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.583558] pci_bus 0000:02: resource 0 [io 0xb000-0xcfff]
[ 0.583559] pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfd9fffff]
[ 0.583561] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.583562] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.583564] pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.583565] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.583567] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.583569] pci_bus 0000:04: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.583570] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.583572] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.583573] pci_bus 0000:05: resource 1 [mem 0xfd500000-0xfd5fffff]
[ 0.583575] pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.583576] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.583578] pci_bus 0000:06: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.583579] pci_bus 0000:06: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.583581] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
[ 0.583582] pci_bus 0000:07: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.583584] pci_bus 0000:07: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.583586] pci_bus 0000:08: resource 0 [io 0x9000-0x9fff]
[ 0.583587] pci_bus 0000:08: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 0.583589] pci_bus 0000:08: resource 2 [mem 0xfd600000-0xfd6fffff pref]
[ 0.583590] pci_bus 0000:08: resource 4 [io 0x0000-0xffff]
[ 0.583592] pci_bus 0000:08: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.583593] pci_bus 0000:08: resource 6 [mem 0xc0000000-0xdfffffff]
[ 0.583595] pci_bus 0000:08: resource 7 [mem 0xe0900000-0xffffffff]
[ 0.583596] pci_bus 0000:08: resource 8 [mem 0xe0100000-0xe08fffff]
[ 0.583598] pci_bus 0000:08: resource 9 [mem 0x240000000-0xfcffffffff]
[ 0.583619] NET: Registered protocol family 2
[ 0.583770] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.584809] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.587809] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.588112] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.588114] TCP reno registered
[ 0.588124] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.588174] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.588275] NET: Registered protocol family 1
[ 0.919963] pci 0000:03:00.0: Boot video device
[ 0.919980] PCI: CLS 64 bytes, default 64
[ 0.920026] Unpacking initramfs...
[ 0.965040] Freeing initrd memory: 3540k freed
[ 0.966631] PCI-DMA: Disabling AGP.
[ 0.968974] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.968975] PCI-DMA: using GART IOMMU.
[ 0.968977] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.971843] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.972020] IBS: LVT offset 1 assigned
[ 0.972020] perf: AMD IBS detected (0x0000001f)
[ 0.972020] audit: initializing netlink socket (disabled)
[ 0.972020] type=2000 audit(1327614295.969:1): initialized
[ 0.983339] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.013377] VFS: Disk quotas dquot_6.5.2
[ 1.013418] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.013481] msgmni has been set to 15971
[ 1.013571] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.013571] io scheduler noop registered
[ 1.013571] io scheduler deadline registered
[ 1.013571] io scheduler cfq registered (default)
[ 1.015654] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.015654] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.015654] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.015654] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 1.015654] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.015654] pcieport 0000:00:09.0: irq 42 for MSI/MSI-X
[ 1.015654] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.015654] pcieport 0000:00:0a.0: irq 43 for MSI/MSI-X
[ 1.015654] pcieport 0000:01:00.0: setting latency timer to 64
[ 1.015654] pcieport 0000:01:00.0: irq 44 for MSI/MSI-X
[ 1.015654] pcieport 0000:02:04.0: setting latency timer to 64
[ 1.015654] pcieport 0000:02:04.0: irq 45 for MSI/MSI-X
[ 1.015654] pcieport 0000:02:08.0: setting latency timer to 64
[ 1.015654] pcieport 0000:02:08.0: irq 46 for MSI/MSI-X
[ 1.015654] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.036604] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.089984] Linux agpgart interface v0.103
[ 1.089984] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.090029] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.090040] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.090949] mousedev: PS/2 mouse device common for all mice
[ 1.090949] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.090949] rtc0: alarms up to one day, 114 bytes nvram
[ 1.090949] cpuidle: using governor ladder
[ 1.090949] cpuidle: using governor menu
[ 1.090949] TCP cubic registered
[ 1.090949] NET: Registered protocol family 17
[ 1.090949] Registering the dns_resolver key type
[ 1.090949] PM: Hibernation image not present or could not be loaded.
[ 1.090949] registered taskstats version 1
[ 1.096953] rtc_cmos rtc_cmos: setting system clock to 2012-01-26 21:44:57 UTC (1327614297)
[ 1.096980] Initializing network drop monitor service
[ 1.097877] Freeing unused kernel memory: 728k freed
[ 1.098012] Write protecting the kernel read-only data: 8192k
[ 1.102668] Freeing unused kernel memory: 1848k freed
[ 1.104691] Freeing unused kernel memory: 696k freed
[ 1.110427] udevd[88]: starting version 178
[ 1.135385] SCSI subsystem initialized
[ 1.138212] usbcore: registered new interface driver usbfs
[ 1.138227] usbcore: registered new interface driver hub
[ 1.138580] usbcore: registered new device driver usb
[ 1.140963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.141074] ehci_hcd 0000:00:12.2: PCI->APIC IRQ transform: INT B -> IRQ 17
[ 1.141108] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.141134] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.141143] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.141178] ehci_hcd 0000:00:12.2: debug port 1
[ 1.141201] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 1.141313] libata version 3.00 loaded.
[ 1.148154] Disabling lock debugging due to kernel taint
[ 1.148174] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 1.149947] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.150125] hub 1-0:1.0: USB hub found
[ 1.150131] hub 1-0:1.0: 6 ports detected
[ 1.150373] ehci_hcd 0000:00:13.2: PCI->APIC IRQ transform: INT B -> IRQ 19
[ 1.150416] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.153107] fglrx: Unknown symbol acpi_lid_notifier_register (err 0)
[ 1.153224] fglrx: Unknown symbol acpi_lid_open (err 0)
[ 1.153224] fglrx: Unknown symbol acpi_lid_notifier_unregister (err 0)
[ 1.156619] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.156631] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.156658] ehci_hcd 0000:00:13.2: debug port 1
[ 1.156682] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 1.157683] fglrx: Unknown symbol acpi_lid_notifier_register (err 0)
[ 1.157800] fglrx: Unknown symbol acpi_lid_open (err 0)
[ 1.157842] fglrx: Unknown symbol acpi_lid_notifier_unregister (err 0)
[ 1.160890] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.166602] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.166655] hub 2-0:1.0: USB hub found
[ 1.166658] hub 2-0:1.0: 6 ports detected
[ 1.166724] ahci 0000:00:11.0: version 3.0
[ 1.166724] ahci 0000:00:11.0: PCI->APIC IRQ transform: INT A -> IRQ 22
[ 1.166724] ahci 0000:00:11.0: irq 47 for MSI/MSI-X
[ 1.166785] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.166788] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.167127] scsi0 : ahci
[ 1.167127] scsi1 : ahci
[ 1.167127] scsi2 : ahci
[ 1.167127] scsi3 : ahci
[ 1.167127] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 47
[ 1.167127] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 47
[ 1.167127] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 47
[ 1.167127] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 47
[ 1.167127] ahci 0000:07:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 1.167127] pata_atiixp 0000:00:14.1: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 1.167127] scsi4 : pata_atiixp
[ 1.167127] scsi5 : pata_atiixp
[ 1.167127] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 1.167127] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 1.167127] ohci_hcd 0000:00:12.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 1.167127] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.167127] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.167127] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 1.179950] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.179953] ahci 0000:07:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.179957] ahci 0000:07:00.0: setting latency timer to 64
[ 1.180169] scsi6 : ahci
[ 1.180169] scsi7 : ahci
[ 1.180169] ata7: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 18
[ 1.180169] ata8: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 18
[ 1.180169] pata_acpi 0000:07:00.1: enabling device (0000 -> 0001)
[ 1.180169] pata_acpi 0000:07:00.1: PCI->APIC IRQ transform: INT B -> IRQ 18
[ 1.180169] pata_acpi 0000:07:00.1: setting latency timer to 64
[ 1.224303] hub 3-0:1.0: USB hub found
[ 1.224303] hub 3-0:1.0: 3 ports detected
[ 1.224334] ohci_hcd 0000:00:12.1: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 1.224334] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.224334] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.224334] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.280959] hub 4-0:1.0: USB hub found
[ 1.280959] hub 4-0:1.0: 3 ports detected
[ 1.280986] ohci_hcd 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 1.280986] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.280986] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.280986] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.333280] ata6.00: ATA-8: ST2000DM001-9YN164, CC96, max UDMA/133
[ 1.333283] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.337945] hub 5-0:1.0: USB hub found
[ 1.337945] hub 5-0:1.0: 3 ports detected
[ 1.337978] ohci_hcd 0000:00:13.1: PCI->APIC IRQ transform: INT A -> IRQ 18
[ 1.337978] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.337978] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.337978] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.359919] ata6.01: ATA-8: ST31000528AS, CC34, max UDMA/133
[ 1.359922] ata6.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.373275] ata6.00: configured for UDMA/100
[ 1.394288] hub 6-0:1.0: USB hub found
[ 1.394288] hub 6-0:1.0: 3 ports detected
[ 1.394311] ohci_hcd 0000:00:14.5: PCI->APIC IRQ transform: INT C -> IRQ 18
[ 1.394311] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.394311] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.394311] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.436583] ata6.01: configured for UDMA/100
[ 1.450961] hub 7-0:1.0: USB hub found
[ 1.450961] hub 7-0:1.0: 2 ports detected
[ 1.489926] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.493261] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.499923] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.499932] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.649914] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.649910] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.02, max UDMA/100
[ 1.653237] ata3.00: configured for UDMA/100
[ 1.653263] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.02 PQ: 0 ANSI: 5
[ 1.655553] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.676566] ata4.00: HPA detected: current 586070255, native 586072368
[ 1.676570] ata4.00: ATA-8: WDC WD3000HLFS-01G6U0, 04.04V01, max UDMA/133
[ 1.676570] ata4.00: 586070255 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.686562] ata4.00: configured for UDMA/133
[ 1.686604] scsi 3:0:0:0: Direct-Access ATA WDC WD3000HLFS-0 04.0 PQ: 0 ANSI: 5
[ 1.686689] scsi 5:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC96 PQ: 0 ANSI: 5
[ 1.686712] scsi 5:0:1:0: Direct-Access ATA ST31000528AS CC34 PQ: 0 ANSI: 5
[ 1.687055] pata_jmicron 0000:07:00.1: PCI->APIC IRQ transform: INT B -> IRQ 18
[ 1.687055] pata_jmicron 0000:07:00.1: setting latency timer to 64
[ 1.687055] sd 3:0:0:0: [sda] 586070255 512-byte logical blocks: (300 GB/279 GiB)
[ 1.687055] sd 3:0:0:0: [sda] Write Protect is off
[ 1.687055] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.687055] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.687055] sd 5:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.687055] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 1.687055] sd 5:0:0:0: [sdb] Write Protect is off
[ 1.687055] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.687055] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.687055] sd 5:0:1:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.687055] sd 5:0:1:0: [sdc] Write Protect is off
[ 1.687055] sd 5:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.687055] sd 5:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.687055] scsi8 : pata_jmicron
[ 1.687055] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.687055] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.689935] scsi9 : pata_jmicron
[ 1.690067] ata9: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 18
[ 1.690067] ata10: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 18
[ 1.690067] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.706564] usb 3-3: new low-speed USB device number 2 using ohci_hcd
[ 1.709922] sdb: sdb1 sdb2
[ 1.710504] sda: sda1 sda2 sda3 sda4
[ 1.710517] sda: p4 size 20969472 extends beyond EOD, enabling native capacity
[ 1.710517] ata4: hard resetting link
[ 1.726599] sdc: sdc1
[ 1.731420] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1.736584] sd 5:0:1:0: [sdc] Attached SCSI disk
[ 1.896683] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input0
[ 1.897345] generic-usb 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input0
[ 1.906614] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input1
[ 1.907285] generic-usb 0003:046D:C521.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-3/input1
[ 1.907285] usbcore: registered new interface driver usbhid
[ 1.907285] usbhid: USB HID core driver
[ 1.973212] Switching to clocksource tsc
[ 2.129599] usb 4-1: new low-speed USB device number 2 using ohci_hcd
[ 2.193273] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.208095] ata4.00: n_sectors mismatch 586070255 != 586072368
[ 2.208098] ata4.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[ 2.216578] ata4.00: configured for UDMA/133
[ 2.216582] ata4: EH complete
[ 2.216668] sd 3:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
[ 2.216905] sda: detected capacity change from 300067970560 to 300069052416
[ 2.243307] sda: sda1 sda2 sda3 sda4
[ 2.243590] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.341779] input: Genius Multimedia Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input2
[ 2.341812] generic-usb 0003:0458:0708.0003: input,hidraw2: USB HID v1.11 Keyboard [Genius Multimedia Keyboard] on usb-0000:00:12.1-1/input0
[ 2.361632] input: Genius Multimedia Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input3
[ 2.361681] generic-usb 0003:0458:0708.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Genius Multimedia Keyboard] on usb-0000:00:12.1-1/input1
[ 2.939621] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.992107] udevd[243]: starting version 178
[ 4.220355] EDAC MC: Ver: 2.1.0
[ 4.223287] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.260077] MCE: In-kernel MCE decoding enabled.
[ 4.265446] AMD64 EDAC driver v3.4.0
[ 4.265512] EDAC amd64: DRAM ECC disabled.
[ 4.265519] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.265520] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.265521] (Note that use of the override may cause unknown side effects.)
[ 4.289047] firewire_ohci 0000:08:0e.0: PCI->APIC IRQ transform: INT A -> IRQ 22
[ 4.309438] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.309453] r8169 0000:05:00.0: PCI->APIC IRQ transform: INT A -> IRQ 19
[ 4.309480] r8169 0000:05:00.0: setting latency timer to 64
[ 4.309519] r8169 0000:05:00.0: irq 48 for MSI/MSI-X
[ 4.309671] r8169 0000:05:00.0: eth0: RTL8168c/8111c at 0xffffc900017a0000, 00:24:1d:76:91:9c, XID 1c4000c0 IRQ 48
[ 4.309673] r8169 0000:05:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 4.309707] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.309719] r8169 0000:06:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17
[ 4.309732] r8169 0000:06:00.0: setting latency timer to 64
[ 4.309766] r8169 0000:06:00.0: irq 49 for MSI/MSI-X
[ 4.309895] r8169 0000:06:00.0: eth1: RTL8168c/8111c at 0xffffc9000175a000, 00:24:1d:76:91:9e, XID 1c4000c0 IRQ 49
[ 4.309898] r8169 0000:06:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 4.319010] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 4.319060] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 4.339695] firewire_ohci: Added fw-ohci device 0000:08:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 4.347192] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.368446] cfg80211: Calling CRDA to update world regulatory domain
[ 4.439847] fglrx: Unknown symbol acpi_lid_notifier_register (err 0)
[ 4.439887] fglrx: Unknown symbol acpi_lid_notifier_register (err 0)
[ 4.440213] fglrx: Unknown symbol acpi_lid_open (err 0)
[ 4.440242] fglrx: Unknown symbol acpi_lid_open (err 0)
[ 4.440372] fglrx: Unknown symbol acpi_lid_notifier_unregister (err 0)
[ 4.440384] fglrx: Unknown symbol acpi_lid_notifier_unregister (err 0)
[ 4.518173] rt2800pci 0000:08:07.0: PCI->APIC IRQ transform: INT A -> IRQ 21
[ 4.546577] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.546764] Registered led device: rt2800pci-phy0::radio
[ 4.546777] Registered led device: rt2800pci-phy0::assoc
[ 4.546791] Registered led device: rt2800pci-phy0::quality
[ 4.566190] snd_hda_intel 0000:00:14.2: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 4.712416] hda_codec: ALC889A: BIOS auto-probing.
[ 4.729011] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 4.729173] snd_hda_intel 0000:03:00.1: PCI->APIC IRQ transform: INT B -> IRQ 18
[ 4.729237] snd_hda_intel 0000:03:00.1: irq 50 for MSI/MSI-X
[ 4.729256] snd_hda_intel 0000:03:00.1: setting latency timer to 64
[ 4.743475] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 4.743566] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/0000:02:04.0/0000:03:00.1/sound/card1/input6
[ 4.839477] firewire_core: created device fw0: GUID 00aa981000001fd0, S400
[ 5.683949] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 5.731153] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.795031] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.871329] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.885607] Adding 10484732k swap on /dev/sda4. Priority:-1 extents:1 across:10484732k
[ 6.915362] r8169 0000:05:00.0: eth0: link down
[ 6.915375] r8169 0000:05:00.0: eth0: link down
[ 8.609247] r8169 0000:05:00.0: eth0: link up
[faktorqm@the_missile /]$ note 7:
[faktorqm@the_missile /]$ lspci
00:00.0 Host bridge: ATI Technologies Inc RD790 Northbridge only dual slot PCI-e_GFX and HT3 K8 part
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:07.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D)
00:09.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port E)
00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F)
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]
00:12.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:12.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:13.2 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ab)
02:04.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ab)
02:08.0 PCI bridge: PLX Technology, Inc. PEX 8647 48-Lane, 3-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ab)
03:00.0 VGA compatible controller: ATI Technologies Inc R700 [Radeon HD 4870 X2]
03:00.1 Audio device: ATI Technologies Inc RV770 HDMI Audio [Radeon HD 4850/4870]
04:00.0 Display controller: ATI Technologies Inc R700 [Radeon HD 4870 X2]
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02)
08:07.0 Network controller: Ralink corp. RT2800 802.11n PCI
08:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
[faktorqm@the_missile /]$ note 8:
[root@the_missile /]# cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
[root@the_missile /]# Now, the problem:
[root@the_missile /]# modprobe -vvvv fglrx
insmod /lib/modules/3.2.1-2-ARCH/kernel/drivers/acpi/button.ko.gz
libkmod: kmod_module_insert_module: Failed to insert module '/lib/modules/3.2.1-2-ARCH/kernel/drivers/acpi/button.ko.gz': No such device
[root@the_missile /]#
now, if you see menu.lst from grub, I disabled acpi because the kernel never boot if that option is not especified. I tried with acpi=noirq and acpi=force and the kernel never boot. So, I don't have a solution in my mind, and I don't know one path to follow. If someone can give me just an idea of what happend, I will really appreciate that.
KDE works fine, and X starts fine.
pages that I read:
https://wiki.archlinux.org/index.php/ATI_Catalyst
https://bbs.archlinux.org/viewtopic.php?id=79509 (what's about this??)
https://bbs.archlinux.org/viewtopic.php?id=123669
and many many others pages talking about acpi, lacpi, apic, etc.
Thank you for your time in advance. Regards!!
Last edited by faktorqm (2012-01-27 02:25:31)
Offline
#2 2012-01-27 01:37:07
- faktorqm
- Member
- From: Argentina
- Registered: 2012-01-27
- Posts: 18
Re: fglrx + acpi = hard problems
I forgot to mention that I blacklisted the radeon module following the new procedure in /etc/modprobe.d/blacklist.conf and the contest of this file is "blacklist radeon" and my rc.conf is:
[faktorqm@the_missile /]$ cat /etc/rc.conf
#
# /etc/rc.conf - Main Configuration for Arch Linux
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="America/Argentina/Buenos_Aires"
KEYMAP="bg-cp855"
CONSOLEFONT="cp850-8x16"
CONSOLEMAP=
USECOLOR="yes"
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
#
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="the_missile"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
#
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
#
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
#
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This requires the netcfg package
#
#NETWORKS=(main)
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
#
DAEMONS=(autofglrx hwclock syslog-ng network netfs crond kdm)
[faktorqm@the_missile /]$ THANK YOU AGAIN!! Regards!!
Last edited by faktorqm (2012-01-27 02:26:15)
Offline
#3 2012-01-27 02:00:40
- Earnestly
- Member
- Registered: 2011-08-18
- Posts: 805
Re: fglrx + acpi = hard problems
Good grief, please use [ code ] tags: https://wiki.archlinux.org/index.php/Fo … s_and_Code
Best of luck otherwise.
Offline
#4 2012-01-27 02:27:20
- faktorqm
- Member
- From: Argentina
- Registered: 2012-01-27
- Posts: 18
Re: fglrx + acpi = hard problems
thank you Kaustic! I didn't see the etiqutte. I edited the posts in order to maintain the forum order. Sorry!!. Regards!!
Last edited by faktorqm (2012-01-27 13:23:12)
Offline
Pages: 1