You are not logged in.
- Topics: Active | Unanswered
#1 2012-02-05 13:08:15
- tang0th
- Member
- Registered: 2011-08-28
- Posts: 6
Computer hangs while turning on, also when opening chromium
Hi all
I have a Dell Optiplex GX260 with a Pentium 4 Processor, I run the stock Arch Kernel (Linux 3.2.2-1).
My problem is that regularly while starting up my computer hangs at ':: Triggering uevents...', the cursor stops blinking and the light on my PC that shows its doing something doesn't blink or light up). This even happens with the Live CD (2011.08.19 - Core - Dualarch), although the cursor keeps on blinking but nothing happens.
After rebooting around 3-7 times it eventually gets past the ':: Triggering uevents...' and loads up my DE (KDE), now if I try and open Chromium there is a big chance my computer will freeze again, rebooting and trying to open Chromium again a couple more times seems to get past that. After Chromium has been running for a while everything is fine, there are no more crashes.
I have (using the Live CD) collected quite a few copies of /var/log. Here is one dmesg.log output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Jan 26 08:28:27 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe71000 (usable)
[ 0.000000] BIOS-e820: 000000003fe71000 - 000000003fe73000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fe73000 - 000000003fe94000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fe94000 - 000000003ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: Dell Computer Corporation OptiPlex GX260 / , BIOS A09 11/01/2004
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3fe71 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fe710] fe710
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
[ 0.000000] RAMDISK: 3fbee000 - 3fe61000
[ 0.000000] Allocated new RAMDISK: 3758b000 - 377fde97
[ 0.000000] Move RAMDISK from 000000003fbee000 - 000000003fe60e96 to 3758b000 - 377fde96
[ 0.000000] ACPI: RSDP 000feba0 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 000fd509 00038 (v01 DELL GX260 00000009 ASL 00000061)
[ 0.000000] ACPI: FACP 000fd541 00074 (v01 DELL GX260 00000009 ASL 00000061)
[ 0.000000] ACPI: DSDT fffd861c 026B0 (v01 DELL dt_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 3fe71000 00040
[ 0.000000] ACPI: SSDT fffdaccc 000A7 (v01 DELL st_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: APIC 000fd5b5 0006C (v01 DELL GX260 00000009 ASL 00000061)
[ 0.000000] ACPI: BOOT 000fd621 00028 (v01 DELL GX260 00000009 ASL 00000061)
[ 0.000000] ACPI: ASF! 000fd649 00067 (v16 DELL GX260 00000009 ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 134MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fe71
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0003fe71
[ 0.000000] On node 0 totalpages: 261633
[ 0.000000] free_area_init_node: node 0, pgdat c05d3900, node_mem_map f6d8a200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 269 pages used for memmap
[ 0.000000] HighMem zone: 34150 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:bed00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6800000 s31040 r0 d22208 u1048576
[ 0.000000] pcpu-alloc: s31040 r0 d22208 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259588
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/e527c27f-14b6-449a-b6c7-5d0f99fcd72c ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4187664 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003fe71)
[ 0.000000] Memory: 1024256k/1046980k available (3573k kernel code, 22276k reserved, 1404k data, 516k init, 137676k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc05dd000 - 0xc065e000 ( 516 kB)
[ 0.000000] .data : 0xc047d495 - 0xc05dc6c0 (1404 kB)
[ 0.000000] .text : 0xc0100000 - 0xc047d495 (3573 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f600a000 soft=f600c000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1992.463 MHz processor.
[ 0.006671] Calibrating delay loop (skipped), value calculated using timer frequency.. 3986.96 BogoMIPS (lpj=6641543)
[ 0.006680] pid_max: default: 32768 minimum: 301
[ 0.010019] Security Framework initialized
[ 0.010033] AppArmor: AppArmor disabled by boot time parameter
[ 0.010070] Mount-cache hash table entries: 512
[ 0.010422] Initializing cgroup subsys cpuacct
[ 0.010435] Initializing cgroup subsys memory
[ 0.010452] Initializing cgroup subsys devices
[ 0.010457] Initializing cgroup subsys freezer
[ 0.010461] Initializing cgroup subsys net_cls
[ 0.010466] Initializing cgroup subsys blkio
[ 0.010530] CPU0: Hyper-Threading is disabled
[ 0.010537] mce: CPU supports 4 MCE banks
[ 0.010556] CPU0: Thermal monitoring enabled (TM1)
[ 0.010686] SMP alternatives: switching to UP code
[ 0.019864] ACPI: Core revision 20110623
[ 0.045659] ftrace: allocating 15976 entries in 32 pages
[ 0.046811] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.047192] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080863] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 07
[ 0.083328] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.083328] ... version: 0
[ 0.083328] ... bit width: 40
[ 0.083328] ... generic registers: 18
[ 0.083328] ... value mask: 000000ffffffffff
[ 0.083328] ... max period: 0000007fffffffff
[ 0.083328] ... fixed-purpose events: 0
[ 0.083328] ... event mask: 000000000003ffff
[ 0.100247] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.106672] Brought up 1 CPUs
[ 0.106677] Total of 1 processors activated (3986.96 BogoMIPS).
[ 0.107549] devtmpfs: initialized
[ 0.107845] PM: Registering ACPI NVS region at 3fe71000 (8192 bytes)
[ 0.110326] print_constraints: dummy:
[ 0.110429] NET: Registered protocol family 16
[ 0.110712] ACPI: bus type pci registered
[ 0.130007] PCI: PCI BIOS revision 2.10 entry at 0xfbdea, last bus=1
[ 0.130012] PCI: Using configuration type 1 for base access
[ 0.131454] bio: create slab <bio-0> at 0
[ 0.131589] ACPI: Added _OSI(Module Device)
[ 0.131594] ACPI: Added _OSI(Processor Device)
[ 0.131598] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.131603] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.132329] ACPI: EC: Look up EC in DSDT
[ 0.150606] ACPI: Interpreter enabled
[ 0.150627] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.150668] ACPI: Using IOAPIC for interrupt routing
[ 0.181963] ACPI: No dock devices found.
[ 0.181969] HEST: Table not found.
[ 0.181978] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.186698] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.200017] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.200023] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.200028] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.200033] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.200038] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000fffff] (ignored)
[ 0.200042] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
[ 0.200047] pci_root PNP0A03:00: host bridge window [mem 0xfef00000-0xffafffff] (ignored)
[ 0.200072] pci 0000:00:00.0: [8086:2560] type 0 class 0x000600
[ 0.200088] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.200187] pci 0000:00:02.0: [8086:2562] type 0 class 0x000300
[ 0.200212] pci 0000:00:02.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[ 0.200228] pci 0000:00:02.0: reg 14: [mem 0xff680000-0xff6fffff]
[ 0.200366] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
[ 0.200430] pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f]
[ 0.200482] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
[ 0.200546] pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f]
[ 0.200597] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
[ 0.200661] pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f]
[ 0.200726] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
[ 0.200757] pci 0000:00:1d.7: reg 10: [mem 0xffa00800-0xffa00bff]
[ 0.200882] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.200891] pci 0000:00:1d.7: PME# disabled
[ 0.200917] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.200982] pci 0000:00:1f.0: [8086:24c0] type 0 class 0x000601
[ 0.200988] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.200990] * this clock source is slow. If you are sure your timer does not have
[ 0.200992] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.201106] pci 0000:00:1f.1: [8086:24cb] type 0 class 0x000101
[ 0.201127] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.201143] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.201159] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.201175] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.201191] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.201208] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.201252] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05
[ 0.201315] pci 0000:00:1f.3: reg 20: [io 0xdc80-0xdc9f]
[ 0.201372] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401
[ 0.201396] pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff]
[ 0.201411] pci 0000:00:1f.5: reg 14: [io 0xdc40-0xdc7f]
[ 0.201427] pci 0000:00:1f.5: reg 18: [mem 0xffa00400-0xffa005ff]
[ 0.201443] pci 0000:00:1f.5: reg 1c: [mem 0xffa00000-0xffa000ff]
[ 0.201508] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.201516] pci 0000:00:1f.5: PME# disabled
[ 0.201581] pci 0000:01:0c.0: [8086:100e] type 0 class 0x000200
[ 0.201609] pci 0000:01:0c.0: reg 10: [mem 0xff8e0000-0xff8fffff]
[ 0.201635] pci 0000:01:0c.0: reg 18: [io 0xecc0-0xecff]
[ 0.201733] pci 0000:01:0c.0: PME# supported from D0 D3hot D3cold
[ 0.201741] pci 0000:01:0c.0: PME# disabled
[ 0.201784] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.201792] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.201799] pci 0000:00:1e.0: bridge window [mem 0xff800000-0xff9fffff]
[ 0.201806] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.201811] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.201825] pci_bus 0000:00: on NUMA node 0
[ 0.201833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.202277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.202730] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.301646] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.302001] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.302351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.302700] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.303045] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.303624] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.303975] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.304325] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 0.304600] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.304612] vgaarb: loaded
[ 0.304615] vgaarb: bridge control possible 0000:00:02.0
[ 0.304777] PCI: Using ACPI for IRQ routing
[ 0.304784] PCI: pci_cache_line_size set to 64 bytes
[ 0.304854] reserve RAM buffer: 000000003fe71000 - 000000003fffffff
[ 0.305089] NetLabel: Initializing
[ 0.305093] NetLabel: domain hash size = 128
[ 0.305096] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.305121] NetLabel: unlabeled traffic allowed by default
[ 0.318861] pnp: PnP ACPI init
[ 0.318908] ACPI: bus type pnp registered
[ 0.330026] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.330032] pnp 00:00: [mem 0x00100000-0x00ffffff]
[ 0.330038] pnp 00:00: [mem 0x01000000-0x3fe70fff]
[ 0.330042] pnp 00:00: [mem 0x000c0000-0x000cbfff]
[ 0.330046] pnp 00:00: [mem 0x000e0000-0x000fffff]
[ 0.330050] pnp 00:00: [mem 0xfec00000-0xfec0ffff]
[ 0.330054] pnp 00:00: [mem 0xfee00000-0xfee0ffff]
[ 0.330058] pnp 00:00: [mem 0xffb00000-0xffbfffff]
[ 0.330062] pnp 00:00: [mem 0xffc00000-0xffffffff]
[ 0.330178] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.330185] system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved
[ 0.330190] system 00:00: [mem 0x01000000-0x3fe70fff] could not be reserved
[ 0.330195] system 00:00: [mem 0x000c0000-0x000cbfff] could not be reserved
[ 0.330200] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.330206] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.330211] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.330216] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.330221] system 00:00: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.330229] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.336676] pnp 00:01: [bus 00-ff]
[ 0.336681] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.336685] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.336690] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.336694] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.336699] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[ 0.336703] pnp 00:01: [mem 0x000e0000-0x000fffff window]
[ 0.336707] pnp 00:01: [mem 0xc0000000-0xfebfffff window]
[ 0.336712] pnp 00:01: [mem 0xfef00000-0xffafffff window]
[ 0.336784] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.339349] pnp 00:02: [io 0x0080-0x009f]
[ 0.339354] pnp 00:02: [io 0x0000-0x001f]
[ 0.339357] pnp 00:02: [io 0x00c0-0x00df]
[ 0.339362] pnp 00:02: [dma 4]
[ 0.339419] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.339527] pnp 00:03: [io 0x00f0-0x00ff]
[ 0.339551] pnp 00:03: [irq 13]
[ 0.339614] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.339715] pnp 00:04: [io 0x0061]
[ 0.339772] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.339873] pnp 00:05: [io 0x0070-0x007f]
[ 0.339882] pnp 00:05: [irq 8]
[ 0.339944] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.342963] pnp 00:06: [io 0x03f0-0x03f5]
[ 0.342968] pnp 00:06: [io 0x03f7]
[ 0.342977] pnp 00:06: [irq 6]
[ 0.342981] pnp 00:06: [dma 2]
[ 0.343259] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.344320] pnp 00:07: [io 0x0060]
[ 0.344324] pnp 00:07: [io 0x0064]
[ 0.344333] pnp 00:07: [irq 1]
[ 0.344412] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.348351] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.348362] pnp 00:08: [irq 4]
[ 0.348595] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.353294] pnp 00:09: [io 0x0378-0x037f]
[ 0.353299] pnp 00:09: [io 0x0778-0x077f]
[ 0.353324] pnp 00:09: [irq 7]
[ 0.353329] pnp 00:09: [dma 0 disabled]
[ 0.353898] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.355728] pnp 00:0a: [io 0x0062-0x0063]
[ 0.355733] pnp 00:0a: [io 0x0065-0x006f]
[ 0.355737] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.355740] pnp 00:0a: [io 0x0800-0x085f]
[ 0.355744] pnp 00:0a: [io 0x0c00-0x0c7f]
[ 0.355748] pnp 00:0a: [io 0x0860-0x08ff]
[ 0.355839] system 00:0a: [io 0x0800-0x085f] has been reserved
[ 0.355845] system 00:0a: [io 0x0c00-0x0c7f] has been reserved
[ 0.355849] system 00:0a: [io 0x0860-0x08ff] has been reserved
[ 0.355856] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.356606] pnp: PnP ACPI: found 11 devices
[ 0.356610] ACPI: ACPI bus type pnp unregistered
[ 0.395567] Switching to clocksource acpi_pm
[ 0.395608] PCI: max bus depth: 1 pci_try_num: 2
[ 0.395639] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
[ 0.395651] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff])
[ 0.395659] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[ 0.395664] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.395674] pci 0000:00:1e.0: bridge window [mem 0xff800000-0xff9fffff]
[ 0.395702] pci 0000:00:1e.0: setting latency timer to 64
[ 0.395710] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.395716] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.395721] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.395725] pci_bus 0000:01: resource 1 [mem 0xff800000-0xff9fffff]
[ 0.395730] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.395734] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
[ 0.395817] NET: Registered protocol family 2
[ 0.395950] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.396483] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.396483] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.396652] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.396667] TCP reno registered
[ 0.396757] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.396797] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.397061] NET: Registered protocol family 1
[ 0.397103] pci 0000:00:02.0: Boot video device
[ 0.397224] PCI: CLS 64 bytes, default 64
[ 0.397375] Unpacking initramfs...
[ 0.479929] Freeing initrd memory: 2508k freed
[ 0.484941] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[ 0.484948] Simple Boot Flag at 0x7a set to 0x1
[ 0.485378] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 0.485384] apm: overridden by ACPI.
[ 0.485774] audit: initializing netlink socket (disabled)
[ 0.485800] type=2000 audit(1327842496.483:1): initialized
[ 0.491041] highmem bounce pool size: 64 pages
[ 0.491053] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.504104] VFS: Disk quotas dquot_6.5.2
[ 0.504227] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.504413] msgmni has been set to 1736
[ 0.504778] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.504849] io scheduler noop registered
[ 0.504853] io scheduler deadline registered
[ 0.504866] io scheduler cfq registered (default)
[ 0.505419] ERST: Table is not found!
[ 0.505423] GHES: HEST is not enabled!
[ 0.505454] isapnp: Scanning for PnP cards...
[ 0.862404] isapnp: No Plug & Play device found
[ 0.862548] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.883126] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.927454] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.933807] i8042: PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
[ 0.933812] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.934561] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.934780] mousedev: PS/2 mouse device common for all mice
[ 0.934953] rtc_cmos 00:05: RTC can wake from S4
[ 0.935137] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.935167] rtc0: alarms up to one day, 242 bytes nvram
[ 0.935215] cpuidle: using governor ladder
[ 0.935219] cpuidle: using governor menu
[ 0.935643] TCP cubic registered
[ 0.935650] NET: Registered protocol family 17
[ 0.935667] Registering the dns_resolver key type
[ 0.935703] Using IPI No-Shortcut mode
[ 0.935909] PM: Hibernation image not present or could not be loaded.
[ 0.935922] registered taskstats version 1
[ 0.940849] rtc_cmos 00:05: setting system clock to 2012-01-29 13:08:17 UTC (1327842497)
[ 0.940954] Initializing network drop monitor service
[ 0.941082] Freeing unused kernel memory: 516k freed
[ 0.941965] Write protecting the kernel text: 3576k
[ 0.942002] Write protecting the kernel read-only data: 1088k
[ 0.962573] udevd[32]: starting version 179
[ 0.970522] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.972994] Linux agpgart interface v0.103
[ 0.985817] [drm] Initialized drm 1.1.0 20060810
[ 0.991760] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ 0.991804] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
[ 0.991948] agpgart-intel 0000:00:00.0: detected 1024K stolen memory
[ 0.993144] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 0.997288] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.997307] ACPI: Power Button [VBTN]
[ 0.998468] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.998484] ACPI: Power Button [PWRF]
[ 1.026565] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.026580] i915 0000:00:02.0: setting latency timer to 64
[ 1.046903] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.046910] [drm] Driver supports precise vblank timestamp query.
[ 1.047002] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.066090] [drm] initialized overlay support
[ 1.190729] fbcon: inteldrmfb (fb0) is primary device
[ 1.310332] Console: switching to colour frame buffer device 180x56
[ 1.319431] fb0: inteldrmfb frame buffer device
[ 1.319435] drm: registered panic notifier
[ 1.319478] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.465719] SCSI subsystem initialized
[ 1.493421] Refined TSC clocksource calibration: 1992.613 MHz.
[ 1.493435] Switching to clocksource tsc
[ 1.514550] libata version 3.00 loaded.
[ 1.515963] ata_piix 0000:00:1f.1: version 2.13
[ 1.515986] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.516021] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.516131] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.520454] scsi0 : ata_piix
[ 1.520814] scsi1 : ata_piix
[ 1.520939] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.520945] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.680653] ata2.00: ATAPI: TEAC CD-RW CD-W224E, L.0E, max MWDMA2
[ 1.680835] ata1.00: ATA-7: Hitachi HDT725025VLAT80, V5DOA4NA, max UDMA/133
[ 1.680841] ata1.00: 488397168 sectors, multi 8: LBA48
[ 1.693510] ata2.00: configured for MWDMA2
[ 1.693942] ata1.00: configured for UDMA/100
[ 1.694183] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72502 V5DO PQ: 0 ANSI: 5
[ 1.695553] scsi 1:0:0:0: CD-ROM TEAC CD-W224E L.0E PQ: 0 ANSI: 5
[ 1.712582] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.712683] sd 0:0:0:0: [sda] Write Protect is off
[ 1.712689] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.712732] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.730687] sda: sda1 sda2 sda3 sda4
[ 1.731499] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.739209] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.739219] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.740538] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.178642] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.653712] udevd[115]: starting version 179
[ 3.757766] fuse init (API version 7.17)
[ 4.134939] Floppy drive(s): fd0 is 1.44M
[ 4.146950] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.153622] FDC 0 is a post-1991 82077
[ 4.229762] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.233702] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.255318] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 4.255325] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 4.255399] e1000 0000:01:0c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.274847] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.327845] parport_pc 00:09: reported by Plug and Play ACPI
[ 4.327904] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 4.338139] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.349561] intel_rng: FWH not detected
[ 4.353680] ppdev: user-space parallel port driver
[ 4.378871] usbcore: registered new interface driver usbfs
[ 4.379509] usbcore: registered new interface driver hub
[ 4.386760] usbcore: registered new device driver usb
[ 4.406880] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.406981] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 4.407019] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.407027] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.407085] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 4.407147] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.413374] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 4.413413] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa00800
[ 4.448907] iTCO_vendor_support: vendor-support=0
[ 4.453033] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.453190] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 4.471269] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.471881] hub 1-0:1.0: USB hub found
[ 4.471894] hub 1-0:1.0: 6 ports detected
[ 4.539971] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.540341] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.540361] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.540368] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.540402] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.540443] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
[ 4.544749] hub 2-0:1.0: USB hub found
[ 4.544770] hub 2-0:1.0: 2 ports detected
[ 4.544991] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.545009] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.545016] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.545035] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 4.545092] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[ 4.545880] hub 3-0:1.0: USB hub found
[ 4.545893] hub 3-0:1.0: 2 ports detected
[ 4.546054] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.546073] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.546079] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.546096] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 4.546152] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 4.550800] hub 4-0:1.0: USB hub found
[ 4.550814] hub 4-0:1.0: 2 ports detected
[ 4.690278] snd_intel8x0 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.690336] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[ 4.780084] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 4.793850] e1000 0000:01:0c.0: eth0: (PCI:33MHz:32-bit) 00:08:74:1e:ca:70
[ 4.793872] e1000 0000:01:0c.0: eth0: Intel(R) PRO/1000 Network Connection
[ 5.056715] intel8x0_measure_ac97_clock: measured 50184 usecs (2419 samples)
[ 5.056723] intel8x0: clocking to 48000
[ 5.323398] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 5.720047] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 6.015180] usbcore: registered new interface driver uas
[ 6.043544] Initializing USB Mass Storage driver...
[ 6.048645] Bluetooth: Core ver 2.16
[ 6.049204] NET: Registered protocol family 31
[ 6.049211] Bluetooth: HCI device and connection manager initialized
[ 6.049217] Bluetooth: HCI socket layer initialized
[ 6.049221] Bluetooth: L2CAP socket layer initialized
[ 6.049275] Bluetooth: SCO socket layer initialized
[ 6.049438] scsi2 : usb-storage 1-1:1.0
[ 6.049888] usbcore: registered new interface driver usb-storage
[ 6.049893] USB Mass Storage support registered.
[ 6.062056] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4
[ 6.062643] generic-usb 0003:046D:C062.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-2/input0
[ 6.062698] usbcore: registered new interface driver usbhid
[ 6.062702] usbhid: USB HID core driver
[ 6.069671] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.072897] usbcore: registered new interface driver btusb
[ 6.744977] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 7.051380] scsi 2:0:0:0: CD-ROM PHILIPS SPD3000CC Y5S8 PQ: 0 ANSI: 0
[ 7.055968] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 7.056298] sr 2:0:0:0: Attached scsi CD-ROM sr1
[ 7.065526] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 7.137417] Adding 2048280k swap on /dev/sda2. Priority:-1 extents:1 across:2048280k Anymore logs and details are available on request.
Is this a bug in the Kernel? Have I set up something wrong? Is my old hardware dying on me?
Thanks in advance 
Offline
#2 2012-02-05 16:34:57
- lagagnon
- Member
- From: an Island in the Pacific...
- Registered: 2009-12-10
- Posts: 1,087
- Website
Re: Computer hangs while turning on, also when opening chromium
Given you get the same effect from a Live CD and at various places I would suspect hardware. Run "memtest" first from a Live CD to check your RAM. You might also want to try SystemRescue CD or UltimateBoot CD to check your hard drive.
Philosophy is looking for a black cat in a dark room. Metaphysics is looking for a black cat in a dark room that isn't there. Religion is looking for a black cat in a dark room that isn't there and shouting "I found it!". Science is looking for a black cat in a dark room with a flashlight.
Offline
#3 2012-02-07 19:22:04
- tang0th
- Member
- Registered: 2011-08-28
- Posts: 6
Re: Computer hangs while turning on, also when opening chromium
Thanks for your quick reply I would definitely suspect hardware (especially as my PC isn't in the prime of its youth), however a MemTest86+ test and a HDAT2 and a Hitachi Drive Fitness Test throw up no errors what so ever (No bad segments, no warnings or anything).
This is just a theory of mine but my pc doesn't seem to hang with SystemRescueCD or Parted Magic (both Linux based), so maybe its just Arch specific, although I will need to do more testing on that front
Thanks
Offline
#4 2012-02-20 17:37:49
- tang0th
- Member
- Registered: 2011-08-28
- Posts: 6
Re: Computer hangs while turning on, also when opening chromium
It turns out this issue isn't Arch Specific as it also happens when using live cds (Like SystemRescueCD)...
Are there any typical hardware or software issues that may cause this to happen?
Thanks
Last edited by tang0th (2012-02-20 17:38:52)
Offline