radeon / kms / dri problems

noejoe · 2012-02-20 20:54:05

Hi,

after messing around a few days with my new arch installation (and probably every other live distro in the last few weeks),
I'm really tired of the problems related with the open source radeon driver.
I read the ATI guide as well as the Xorg guide, but my specific problem isn't mentioned anywhere I searched for it.

It seems that kms isn't working with my graphics card (ATI Radeon HD3870), because none of the distro's and/or kernel versions I tried ever worked when kms was enabled. It simply "displays" a black screen, and nothing ever happens. Now I use kernel 3.2.6-2-ARCH on x86_64.

The biggest problem isn't kms because I kind of got used to it. What bothers me most is that I get a black screen too when using the radeon driver in xorg.
No keyboard response, no ssh possible. Not even Xorg.0.log is populated in this scenario.

I realized that when using the vesa driver, everything is fine (except for pretty slow graphics).
When playing around with the files in

/etc/X11/xorg.conf.d

and disabling dri manually, I also get to see graphics, pretty similar to the vesa driver.

Is anybody out there with similar problems?
Thanks in advance, any help is highly appreciated

Greets
joe

20-video.conf

Section "Device"
        Identifier      "ATI Radeon HD3870"
        Driver          "radeon"
        Option  "AGPMode"               "8"   #not used when KMS is on
        Option  "AGPFastWrite"          "off" #could cause instabilities enable it at your own risk
        Option  "SWcursor"              "off" #software cursor might be necessary on some rare occasions, hence set off by default
#       Option  "EnablePageFlip"        "on"  #supported on all R/RV/RS4xx and older hardware and set off by default
#       Option  "AccelMethod"           "XAA" #valid options are XAA and EXA. EXA is the newest acceleration method and its the default.
#       Option  "RenderAccel"           "on"  #enabled by default on all radeon hardware
#       Option  "ColorTiling"           "on"  #enabled by default on RV300 and later radeon cards.
        Option  "EXAVSync"              "off" #default is off, otherwise on
#       Option  "EXAPixmaps"            "on"  #when on icreases 2D performance, but may also cause artifacts on some old cards
        Option  "AccelDFS"              "on"  #default is off, read the radeon manpage for more information
        Option  "DRI"                   "off"
#       Driver          "vesa"
EndSection

dmesg output:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
[    0.000000] Command line: root=/dev/sda9 ro radeon.modeset=0 video=1280x1024
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
[    0.000000]  BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. P35-DS4/P35-DS4, BIOS F14 06/19/2009
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 100000000 mask FE0000000 write-back
[    0.000000]   3 base 0DFF00000 mask FFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f5030] f5030
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000
[    0.000000]  0000000000 - 00dfe00000 page 2M
[    0.000000]  00dfe00000 - 00dfee0000 page 4k
[    0.000000] kernel direct mapping tables up to dfee0000 @ 1fffa000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[    0.000000]  0100000000 - 0120000000 page 2M
[    0.000000] kernel direct mapping tables up to 120000000 @ dfeda000-dfee0000
[    0.000000] RAMDISK: 37d68000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000f6a20 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 00000000dfee3040 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 00000000dfee30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 00000000dfee3180 04B2A (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 00000000dfee0000 00040
[    0.000000] ACPI: HPET 00000000dfee7e00 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 00000000dfee7e80 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: APIC 00000000dfee7d00 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 00000000dfee8520 003AB (v01  PmRef    CpuPm 00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000120000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[    0.000000]   NODE_DATA [000000011fffb000 - 000000011fffffff]
[    0.000000]  [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00120000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000dfee0
[    0.000000]     0: 0x00100000 -> 0x00120000
[    0.000000] On node 0 totalpages: 1048173
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3912 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 896800 pages, LIFO batch:31
[    0.000000]   Normal zone: 2048 pages used for memmap
[    0.000000]   Normal zone: 129024 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000
[    0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[    0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[    0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[    0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82176 r8192 d24320 u524288
[    0.000000] pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029736
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda9 ro radeon.modeset=0 video=1280x1024
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4046860k/4718592k available (4488k kernel code, 525900k absent, 145832k reserved, 4409k data, 736k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2333.500 MHz processor.
[    0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4668.45 BogoMIPS (lpj=7778333)
[    0.003342] pid_max: default: 32768 minimum: 301
[    0.003369] Security Framework initialized
[    0.003374] AppArmor: AppArmor disabled by boot time parameter
[    0.003723] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005581] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.006743] Mount-cache hash table entries: 256
[    0.006907] Initializing cgroup subsys cpuacct
[    0.006913] Initializing cgroup subsys memory
[    0.006922] Initializing cgroup subsys devices
[    0.006924] Initializing cgroup subsys freezer
[    0.006926] Initializing cgroup subsys net_cls
[    0.006928] Initializing cgroup subsys blkio
[    0.006963] CPU: Physical Processor ID: 0
[    0.006964] CPU: Processor Core ID: 0
[    0.006966] mce: CPU supports 6 MCE banks
[    0.006974] CPU0: Thermal monitoring enabled (TM2)
[    0.006979] using mwait in idle threads.
[    0.008147] ACPI: Core revision 20110623
[    0.010032] ftrace: allocating 17394 entries in 69 pages
[    0.013728] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.048079] CPU0: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz stepping 0b
[    0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.049997] PEBS disabled due to CPU errata.
[    0.049997] ... version:                2
[    0.049997] ... bit width:              40
[    0.049997] ... generic registers:      2
[    0.049997] ... value mask:             000000ffffffffff
[    0.049997] ... max period:             000000007fffffff
[    0.049997] ... fixed-purpose events:   3
[    0.049997] ... event mask:             0000000700000003
[    0.066760] NMI watchdog enabled, takes one hw-pmu counter.
[    0.093341] Booting Node   0, Processors  #1
[    0.093345] smpboot cpu 1: start_ip = 98000
[    0.190016] NMI watchdog enabled, takes one hw-pmu counter.
[    0.196659] Brought up 2 CPUs
[    0.196662] Total of 2 processors activated (9337.59 BogoMIPS).
[    0.198466] devtmpfs: initialized
[    0.200386] PM: Registering ACPI NVS region at dfee0000 (12288 bytes)
[    0.200743] print_constraints: dummy: 
[    0.200790] NET: Registered protocol family 16
[    0.200902] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.200905] ACPI: bus type pci registered
[    0.200969] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.200972] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.212178] PCI: Using configuration type 1 for base access
[    0.212775] bio: create slab <bio-0> at 0
[    0.212775] ACPI: Added _OSI(Module Device)
[    0.212775] ACPI: Added _OSI(Processor Device)
[    0.212775] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.212775] ACPI: Added _OSI(Processor Aggregator Device)
[    0.213647] ACPI: EC: Look up EC in DSDT
[    0.216762] ACPI: SSDT 00000000dfee7f00 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
[    0.216943] ACPI: Dynamic OEM Table Load:
[    0.216946] ACPI: SSDT           (null) 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
[    0.217044] ACPI: SSDT 00000000dfee83c0 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
[    0.217213] ACPI: Dynamic OEM Table Load:
[    0.217215] ACPI: SSDT           (null) 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
[    0.217342] ACPI: Interpreter enabled
[    0.217346] ACPI: (supports S0 S3 S4 S5)
[    0.217362] ACPI: Using IOAPIC for interrupt routing
[    0.221381] ACPI: No dock devices found.
[    0.221383] HEST: Table not found.
[    0.221387] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.221434] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.221543] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.221546] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.221548] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.221551] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.221553] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff]
[    0.221565] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[    0.221605] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
[    0.221640] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.221644] pci 0000:00:01.0: PME# disabled
[    0.221678] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[    0.221716] pci 0000:00:1a.0: reg 20: [io  0xe100-0xe11f]
[    0.221762] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[    0.221800] pci 0000:00:1a.1: reg 20: [io  0xe200-0xe21f]
[    0.221848] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[    0.221886] pci 0000:00:1a.2: reg 20: [io  0xe000-0xe01f]
[    0.221936] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[    0.221951] pci 0000:00:1a.7: reg 10: [mem 0xf8104000-0xf81043ff]
[    0.222032] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[    0.222046] pci 0000:00:1b.0: reg 10: [mem 0xf8100000-0xf8103fff 64bit]
[    0.222105] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.222109] pci 0000:00:1b.0: PME# disabled
[    0.222127] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[    0.222188] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.222192] pci 0000:00:1c.0: PME# disabled
[    0.222213] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[    0.222276] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.222279] pci 0000:00:1c.4: PME# disabled
[    0.222298] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
[    0.222360] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.222363] pci 0000:00:1c.5: PME# disabled
[    0.222384] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[    0.222422] pci 0000:00:1d.0: reg 20: [io  0xe300-0xe31f]
[    0.222468] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[    0.222505] pci 0000:00:1d.1: reg 20: [io  0xe400-0xe41f]
[    0.222552] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[    0.222590] pci 0000:00:1d.2: reg 20: [io  0xe500-0xe51f]
[    0.222640] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[    0.222655] pci 0000:00:1d.7: reg 10: [mem 0xf8105000-0xf81053ff]
[    0.222732] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.222788] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
[    0.222862] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.222866] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.222911] pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106
[    0.222928] pci 0000:00:1f.2: reg 10: [io  0xe600-0xe607]
[    0.222935] pci 0000:00:1f.2: reg 14: [io  0xe700-0xe703]
[    0.222942] pci 0000:00:1f.2: reg 18: [io  0xe800-0xe807]
[    0.222949] pci 0000:00:1f.2: reg 1c: [io  0xe900-0xe903]
[    0.222957] pci 0000:00:1f.2: reg 20: [io  0xea00-0xea1f]
[    0.222964] pci 0000:00:1f.2: reg 24: [mem 0xf8106000-0xf81067ff]
[    0.223004] pci 0000:00:1f.2: PME# supported from D3hot
[    0.223008] pci 0000:00:1f.2: PME# disabled
[    0.223023] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[    0.223036] pci 0000:00:1f.3: reg 10: [mem 0xf8107000-0xf81070ff 64bit]
[    0.223055] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
[    0.223108] pci 0000:01:00.0: [1002:9501] type 0 class 0x000300
[    0.223121] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.223131] pci 0000:01:00.0: reg 18: [mem 0xf5000000-0xf500ffff 64bit]
[    0.223138] pci 0000:01:00.0: reg 20: [io  0xb000-0xb0ff]
[    0.223150] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.223178] pci 0000:01:00.0: supports D1 D2
[    0.223196] pci 0000:01:00.1: [1002:aa18] type 0 class 0x000403
[    0.223208] pci 0000:01:00.1: reg 10: [mem 0xf5010000-0xf5013fff 64bit]
[    0.223261] pci 0000:01:00.1: supports D1 D2
[    0.223289] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.223292] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.223295] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.223299] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.223343] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.223347] pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
[    0.223404] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[    0.223487] pci 0000:03:00.0: reg 24: [mem 0xf8000000-0xf8001fff]
[    0.223547] pci 0000:03:00.0: PME# supported from D3hot
[    0.223552] pci 0000:03:00.0: PME# disabled
[    0.223580] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[    0.223602] pci 0000:03:00.1: reg 10: [io  0xc000-0xc007]
[    0.223616] pci 0000:03:00.1: reg 14: [io  0xc100-0xc103]
[    0.223629] pci 0000:03:00.1: reg 18: [io  0xc200-0xc207]
[    0.223642] pci 0000:03:00.1: reg 1c: [io  0xc300-0xc303]
[    0.223655] pci 0000:03:00.1: reg 20: [io  0xc400-0xc40f]
[    0.223733] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.223746] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[    0.223750] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.223753] pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf80fffff]
[    0.223813] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[    0.223831] pci 0000:04:00.0: reg 10: [io  0xd000-0xd0ff]
[    0.223860] pci 0000:04:00.0: reg 18: [mem 0xf7000000-0xf7000fff 64bit]
[    0.223895] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.223970] pci 0000:04:00.0: supports D1 D2
[    0.223972] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.223978] pci 0000:04:00.0: PME# disabled
[    0.223999] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.224008] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[    0.224012] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.224015] pci 0000:00:1c.5:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.224072] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.224076] pci 0000:00:1e.0:   bridge window [io  0x9000-0x9fff]
[    0.224083] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.224085] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.224088] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.224090] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.224093] pci 0000:00:1e.0:   bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
[    0.224112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.224186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.224217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.224253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.224279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.224356]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.224359]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.224361] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.232086] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[    0.232131] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.232172] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.232212] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.232252] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.232293] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.232333] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.232373] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[    0.232459] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.232459] vgaarb: loaded
[    0.232459] vgaarb: bridge control possible 0000:01:00.0
[    0.232459] PCI: Using ACPI for IRQ routing
[    0.233794] PCI: pci_cache_line_size set to 64 bytes
[    0.233868] reserve RAM buffer: 000000000009dc00 - 000000000009ffff 
[    0.233871] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff 
[    0.233976] NetLabel: Initializing
[    0.233978] NetLabel:  domain hash size = 128
[    0.233980] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.233992] NetLabel:  unlabeled traffic allowed by default
[    0.234004] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.234008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.234013] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.243422] Switching to clocksource hpet
[    0.249909] pnp: PnP ACPI init
[    0.249926] ACPI: bus type pnp registered
[    0.250024] pnp 00:00: [bus 00-3f]
[    0.250026] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.250029] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.250031] pnp 00:00: [io  0x0d00-0xffff window]
[    0.250033] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.250035] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.250037] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[    0.250100] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.250165] pnp 00:01: [io  0x0010-0x001f]
[    0.250167] pnp 00:01: [io  0x0022-0x003f]
[    0.250169] pnp 00:01: [io  0x0044-0x005f]
[    0.250171] pnp 00:01: [io  0x0062-0x0063]
[    0.250173] pnp 00:01: [io  0x0065-0x006f]
[    0.250174] pnp 00:01: [io  0x0074-0x007f]
[    0.250176] pnp 00:01: [io  0x0091-0x0093]
[    0.250178] pnp 00:01: [io  0x00a2-0x00bf]
[    0.250179] pnp 00:01: [io  0x00e0-0x00ef]
[    0.250181] pnp 00:01: [io  0x04d0-0x04d1]
[    0.250183] pnp 00:01: [io  0x0290-0x029f]
[    0.250184] pnp 00:01: [io  0x0800-0x087f]
[    0.250186] pnp 00:01: [io  0x0290-0x0294]
[    0.250188] pnp 00:01: [io  0x0880-0x088f]
[    0.250255] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.250258] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.250260] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.250263] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.250265] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.250268] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.250279] pnp 00:02: [dma 4]
[    0.250281] pnp 00:02: [io  0x0000-0x000f]
[    0.250283] pnp 00:02: [io  0x0080-0x0090]
[    0.250285] pnp 00:02: [io  0x0094-0x009f]
[    0.250287] pnp 00:02: [io  0x00c0-0x00df]
[    0.250321] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.250365] pnp 00:03: [irq 0 disabled]
[    0.250376] pnp 00:03: [irq 8]
[    0.250378] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.250411] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.250434] pnp 00:04: [io  0x0070-0x0073]
[    0.250467] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.250475] pnp 00:05: [io  0x0061]
[    0.250505] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.250516] pnp 00:06: [io  0x00f0-0x00ff]
[    0.250521] pnp 00:06: [irq 13]
[    0.250554] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.250652] pnp 00:07: [io  0x03f0-0x03f5]
[    0.250654] pnp 00:07: [io  0x03f7]
[    0.250659] pnp 00:07: [irq 6]
[    0.250661] pnp 00:07: [dma 2]
[    0.250707] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.250839] pnp 00:08: [io  0x03f8-0x03ff]
[    0.250844] pnp 00:08: [irq 4]
[    0.250906] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.251051] pnp 00:09: [io  0x0378-0x037f]
[    0.251057] pnp 00:09: [irq 7]
[    0.251106] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.251179] pnp 00:0a: [io  0x0060]
[    0.251181] pnp 00:0a: [io  0x0064]
[    0.251186] pnp 00:0a: [irq 1]
[    0.251221] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.251248] pnp 00:0b: [io  0x0400-0x04bf]
[    0.251299] system 00:0b: [io  0x0400-0x04bf] has been reserved
[    0.251302] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.251455] pnp 00:0c: [mem 0xf0000000-0xf3ffffff]
[    0.251513] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.251517] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.251644] pnp 00:0d: [mem 0x000d2a00-0x000d3fff]
[    0.251646] pnp 00:0d: [mem 0x000f0000-0x000f7fff]
[    0.251648] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[    0.251649] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[    0.251651] pnp 00:0d: [mem 0xdfee0000-0xdfefffff]
[    0.251653] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.251655] pnp 00:0d: [mem 0x00100000-0xdfedffff]
[    0.251657] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.251659] pnp 00:0d: [mem 0xfed10000-0xfed1dfff]
[    0.251663] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
[    0.251665] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.251667] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
[    0.251669] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[    0.251671] pnp 00:0d: [mem 0x000e0000-0x000effff]
[    0.251735] system 00:0d: [mem 0x000d2a00-0x000d3fff] has been reserved
[    0.251738] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.251741] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.251743] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.251746] system 00:0d: [mem 0xdfee0000-0xdfefffff] could not be reserved
[    0.251749] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.251751] system 00:0d: [mem 0x00100000-0xdfedffff] could not be reserved
[    0.251754] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.251756] system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.251759] system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.251761] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.251764] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.251766] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[    0.251769] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[    0.251772] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.251789] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
[    0.251833] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[    0.251839] pnp: PnP ACPI: found 15 devices
[    0.251840] ACPI: ACPI bus type pnp unregistered
[    0.258732] PCI: max bus depth: 1 pci_try_num: 2
[    0.258768] pci 0000:00:1c.5: BAR 15: assigned [mem 0xdff00000-0xdfffffff pref]
[    0.258772] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf8200000-0xf84fffff pref]
[    0.258777] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8500000-0xf86fffff 64bit pref]
[    0.258781] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8700000-0xf88fffff]
[    0.258785] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8900000-0xf8afffff 64bit pref]
[    0.258789] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
[    0.258792] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.258794] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.258798] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.258801] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.258805] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.258807] pci 0000:00:1c.0:   bridge window [io  0xa000-0xafff]
[    0.258812] pci 0000:00:1c.0:   bridge window [mem 0xf8700000-0xf88fffff]
[    0.258815] pci 0000:00:1c.0:   bridge window [mem 0xf8900000-0xf8afffff 64bit pref]
[    0.258821] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[    0.258824] pci 0000:00:1c.4:   bridge window [io  0xc000-0xcfff]
[    0.258828] pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf80fffff]
[    0.258832] pci 0000:00:1c.4:   bridge window [mem 0xf8500000-0xf86fffff 64bit pref]
[    0.258838] pci 0000:04:00.0: BAR 6: assigned [mem 0xf8200000-0xf820ffff pref]
[    0.258840] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[    0.258843] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.258847] pci 0000:00:1c.5:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.258851] pci 0000:00:1c.5:   bridge window [mem 0xf8200000-0xf84fffff pref]
[    0.258856] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.258859] pci 0000:00:1e.0:   bridge window [io  0x9000-0x9fff]
[    0.258877] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.258881] pci 0000:00:01.0: setting latency timer to 64
[    0.258887] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.258890] pci 0000:00:1c.0: setting latency timer to 64
[    0.258896] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.258900] pci 0000:00:1c.4: setting latency timer to 64
[    0.258908] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.258912] pci 0000:00:1c.5: setting latency timer to 64
[    0.258917] pci 0000:00:1e.0: setting latency timer to 64
[    0.258921] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.258923] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.258925] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.258928] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.258930] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
[    0.258932] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.258934] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf5ffffff]
[    0.258937] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.258939] pci_bus 0000:02: resource 0 [io  0xa000-0xafff]
[    0.258941] pci_bus 0000:02: resource 1 [mem 0xf8700000-0xf88fffff]
[    0.258943] pci_bus 0000:02: resource 2 [mem 0xf8900000-0xf8afffff 64bit pref]
[    0.258945] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.258947] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf80fffff]
[    0.258950] pci_bus 0000:03: resource 2 [mem 0xf8500000-0xf86fffff 64bit pref]
[    0.258952] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.258954] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff]
[    0.258956] pci_bus 0000:04: resource 2 [mem 0xf8200000-0xf84fffff pref]
[    0.258958] pci_bus 0000:05: resource 0 [io  0x9000-0x9fff]
[    0.258961] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.258963] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.258965] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.258967] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[    0.258969] pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff]
[    0.259005] NET: Registered protocol family 2
[    0.259137] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.260130] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.263890] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.264389] TCP: Hash tables configured (established 524288 bind 65536)
[    0.264391] TCP reno registered
[    0.264400] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.264438] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.264577] NET: Registered protocol family 1
[    0.264739] pci 0000:01:00.0: Boot video device
[    0.264751] PCI: CLS 32 bytes, default 64
[    0.264806] Unpacking initramfs...
[    0.302179] Freeing initrd memory: 2592k freed
[    0.302879] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.302883] Placing 64MB software IO TLB between ffff8800dbeda000 - ffff8800dfeda000
[    0.302885] software IO TLB at phys 0xdbeda000 - 0xdfeda000
[    0.303306] audit: initializing netlink socket (disabled)
[    0.303320] type=2000 audit(1329768309.299:1): initialized
[    0.315130] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.338613] VFS: Disk quotas dquot_6.5.2
[    0.338676] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.338772] msgmni has been set to 7909
[    0.338940] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.338964] io scheduler noop registered
[    0.338966] io scheduler deadline registered
[    0.339000] io scheduler cfq registered (default)
[    0.339111] pcieport 0000:00:01.0: setting latency timer to 64
[    0.339140] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.339187] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.339219] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.339274] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.339307] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.339360] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.339392] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.339554] intel_idle: MWAIT substates: 0x220
[    0.339556] intel_idle: does not run on family 6 model 15
[    0.339588] ERST: Table is not found!
[    0.339589] GHES: HEST is not enabled!
[    0.339655] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.360148] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.490595] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.523556] Linux agpgart interface v0.103
[    0.523632] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.523634] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.523753] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.523858] mousedev: PS/2 mouse device common for all mice
[    0.523920] rtc_cmos 00:04: RTC can wake from S4
[    0.524016] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.524040] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.524049] cpuidle: using governor ladder
[    0.524051] cpuidle: using governor menu
[    0.524260] TCP cubic registered
[    0.524381] NET: Registered protocol family 10
[    0.524806] NET: Registered protocol family 17
[    0.524810] Registering the dns_resolver key type
[    0.524938] PM: Hibernation image not present or could not be loaded.
[    0.524943] registered taskstats version 1
[    0.536057] rtc_cmos 00:04: setting system clock to 2012-02-20 20:05:09 UTC (1329768309)
[    0.536101] Initializing network drop monitor service
[    0.537405] Freeing unused kernel memory: 736k freed
[    0.537530] Write protecting the kernel read-only data: 8192k
[    0.542868] Freeing unused kernel memory: 1636k freed
[    0.545368] Freeing unused kernel memory: 660k freed
[    0.552316] udevd[37]: starting version 181
[    0.562725] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.586477] usbcore: registered new interface driver usbfs
[    0.586503] usbcore: registered new interface driver hub
[    0.586559] usbcore: registered new device driver usb
[    0.589654] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.589690] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.589716] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.589719] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.589752] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.592343] uhci_hcd: USB Universal Host Controller Interface driver
[    0.593681] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.593700] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8104000
[    0.597428] SCSI subsystem initialized
[    0.605223] libata version 3.00 loaded.
[    0.606703] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.606886] hub 1-0:1.0: USB hub found
[    0.606891] hub 1-0:1.0: 6 ports detected
[    0.606992] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.607019] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.607023] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.607032] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.610951] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.610968] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8105000
[    0.617006] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[    0.617013] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.617040] pata_acpi 0000:03:00.1: setting latency timer to 64
[    0.617052] pata_acpi 0000:03:00.1: PCI INT B disabled
[    0.617278] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.617298] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    0.617744] scsi0 : pata_jmicron
[    0.617828] scsi1 : pata_jmicron
[    0.618265] ata1: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 17
[    0.618268] ata2: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 17
[    0.623351] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.623510] hub 2-0:1.0: USB hub found
[    0.623514] hub 2-0:1.0: 6 ports detected
[    0.624287] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.624294] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.624297] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.624313] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.624345] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
[    0.624476] hub 3-0:1.0: USB hub found
[    0.624480] hub 3-0:1.0: 2 ports detected
[    0.624556] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.624562] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.624565] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.624572] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.624599] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
[    0.624720] hub 4-0:1.0: USB hub found
[    0.624724] hub 4-0:1.0: 2 ports detected
[    0.624794] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.624799] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.624802] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.624811] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.624831] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
[    0.624951] hub 5-0:1.0: USB hub found
[    0.624955] hub 5-0:1.0: 2 ports detected
[    0.625023] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.625028] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.625031] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.625038] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.625059] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[    0.625179] hub 6-0:1.0: USB hub found
[    0.625183] hub 6-0:1.0: 2 ports detected
[    0.625254] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.625259] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.625262] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.625269] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.625297] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[    0.625418] hub 7-0:1.0: USB hub found
[    0.625421] hub 7-0:1.0: 2 ports detected
[    0.625490] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.625495] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.625498] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.625506] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.625527] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[    0.625645] hub 8-0:1.0: USB hub found
[    0.625649] hub 8-0:1.0: 2 ports detected
[    0.625725] ahci 0000:00:1f.2: version 3.0
[    0.625733] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.625778] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    0.625816] ahci: SSS flag set, parallel bus scan disabled
[    0.625848] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    0.625852] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems 
[    0.625856] ahci 0000:00:1f.2: setting latency timer to 64
[    0.657359] scsi2 : ahci
[    0.657437] scsi3 : ahci
[    0.657507] scsi4 : ahci
[    0.657578] scsi5 : ahci
[    0.657650] scsi6 : ahci
[    0.657718] scsi7 : ahci
[    0.657853] ata3: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106100 irq 44
[    0.657857] ata4: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106180 irq 44
[    0.657859] ata5: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106200 irq 44
[    0.657862] ata6: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106280 irq 44
[    0.657865] ata7: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106300 irq 44
[    0.657867] ata8: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106380 irq 44
[    0.657896] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.670048] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.670053] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.670059] ahci 0000:03:00.0: setting latency timer to 64
[    0.670494] scsi8 : ahci
[    0.670788] scsi9 : ahci
[    0.670874] ata9: SATA max UDMA/133 abar m8192@0xf8000000 port 0xf8000100 irq 16
[    0.670878] ata10: SATA max UDMA/133 abar m8192@0xf8000000 port 0xf8000180 irq 16
[    0.966690] usb 2-3: new high-speed USB device number 2 using ehci_hcd
[    0.983370] ata10: SATA link down (SStatus 0 SControl 300)
[    0.990049] ata9: SATA link down (SStatus 0 SControl 300)
[    1.140041] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.151383] ata3.00: ATA-8: WDC WD3200AAKS-00VYA0, 12.01B02, max UDMA/133
[    1.151387] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.152173] ata3.00: configured for UDMA/133
[    1.152297] scsi 2:0:0:0: Direct-Access     ATA      WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
[    1.303358] Refined TSC clocksource calibration: 2333.333 MHz.
[    1.303363] Switching to clocksource tsc
[    1.423352] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    1.636760] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.638730] ata4.00: ATAPI: PIONEER DVD-RW  DVR-216D, 1.09, max UDMA/66
[    1.640744] ata4.00: configured for UDMA/66 (SET_XFERMODE skipped)
[    1.652637] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input1
[    1.652719] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
[    1.682469] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input2
[    1.682581] generic-usb 0003:046D:C518.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
[    1.682660] usbcore: registered new interface driver usbhid
[    1.682662] usbhid: USB HID core driver
[    1.703319] scsi 3:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-216D 1.09 PQ: 0 ANSI: 5
[    1.833356] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[    2.190031] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.190225] ata5.00: ATAPI: PLEXTOR DVDR   PX-880SA, 1.12, max UDMA/100
[    2.190887] ata5.00: configured for UDMA/100
[    2.192517] scsi 4:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-880SA  1.12 PQ: 0 ANSI: 5
[    2.676695] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.676900] ata6.00: ATAPI: ATAPI   iHAS524   A, BL2J, max UDMA/100
[    2.677593] ata6.00: configured for UDMA/100
[    2.679182] scsi 5:0:0:0: CD-ROM            ATAPI    iHAS524   A      BL2J PQ: 0 ANSI: 5
[    2.996691] ata7: SATA link down (SStatus 0 SControl 300)
[    3.316691] ata8: SATA link down (SStatus 0 SControl 300)
[    3.323729] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    3.323777] sd 2:0:0:0: [sda] Write Protect is off
[    3.323780] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.323800] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.386721]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[    3.387247] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.556655] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    3.556658] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.556876] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    3.560147] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.560302] sr 4:0:0:0: Attached scsi CD-ROM sr1
[    3.563594] sr2: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.564247] sr 5:0:0:0: Attached scsi CD-ROM sr2
[    4.070817] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[    5.358476] udevd[175]: starting version 181
[    5.474506] lp: driver loaded but no devices found
[    5.475629] IT8718 SuperIO detected.
[    5.475878] parport_pc 00:09: reported by Plug and Play ACPI
[    5.475918] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    5.477334] parport0: Printer, Brother HL-1030 series
[    5.477416] lp0: using parport0 (interrupt-driven).
[    5.517688] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    5.517695] ACPI: Power Button [PWRB]
[    5.517765] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    5.517769] ACPI: Power Button [PWRF]
[    5.551233] WARNING! power/level is deprecated; use power/control instead
[    5.564973] Floppy drive(s): fd0 is 1.44M
[    5.571097] ppdev: user-space parallel port driver
[    5.580334] FDC 0 is a post-1991 82077
[    5.595497] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    5.606414] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.643249] Bluetooth: Core ver 2.16
[    5.643265] NET: Registered protocol family 31
[    5.643267] Bluetooth: HCI device and connection manager initialized
[    5.643270] Bluetooth: HCI socket layer initialized
[    5.643271] Bluetooth: L2CAP socket layer initialized
[    5.643277] Bluetooth: SCO socket layer initialized
[    5.644168] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    5.644419] usbcore: registered new interface driver btusb
[    5.652026] iTCO_vendor_support: vendor-support=0
[    5.709504] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    5.709631] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    5.727686] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.727705] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    5.727734] r8169 0000:04:00.0: setting latency timer to 64
[    5.727800] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[    5.728211] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90000640000, 00:1a:4d:50:f7:57, XID 18000000 IRQ 45
[    5.728214] r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    5.747940] [drm] Initialized drm 1.1.0 20060810
[    5.777332] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.777338] pci 0000:01:00.0: setting latency timer to 64
[    5.777490] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    5.777492] [drm] No driver support for vblank timestamp query.
[    5.777495] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[    5.851806] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    5.851809] hda_intel: position_fix set to 1 for device 1458:a022
[    5.851863] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    5.851886] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    6.013524] hda_codec: ALC889A: BIOS auto-probing.
[    6.029368] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    6.030255] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    6.030332] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[    6.030369] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    6.088913] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[    6.089067] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[    7.446383] EXT4-fs (sda9): re-mounted. Opts: (null)
[    7.545273] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    7.566720] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    7.701158] Adding 7823616k swap on /dev/sda7.  Priority:-1 extents:1 across:7823616k 
[    9.038265] r8169 0000:04:00.0: eth0: link down
[    9.038272] r8169 0000:04:00.0: eth0: link down
[    9.038715] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.413267] r8169 0000:04:00.0: eth0: link up
[   11.413793] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   19.706297] FS-Cache: Loaded
[   19.723537] RPC: Registered named UNIX socket transport module.
[   19.723540] RPC: Registered udp transport module.
[   19.723542] RPC: Registered tcp transport module.
[   19.723543] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   19.751238] FS-Cache: Netfs 'nfs' registered for caching
[   21.883339] eth0: no IPv6 routers present
[   34.718456] EXT4-fs (sda9): re-mounted. Opts: commit=0
[   35.061809] EXT4-fs (sda6): re-mounted. Opts: commit=0
[   35.717036] EXT4-fs (sda5): re-mounted. Opts: commit=0
[   54.909473] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.

Xorg.0.log ("working one" with dri disabled):

[    20.695] 
X.Org X Server 1.11.4
Release Date: 2012-01-27
[    20.713] X Protocol Version 11, Revision 0
[    20.713] Build Operating System: Linux 3.2.2-1-ARCH x86_64 
[    20.713] Current Operating System: Linux noejoe-Desktop 3.2.6-2-ARCH #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012 x86_64
[    20.713] Kernel command line: root=/dev/sda9 ro radeon.modeset=0 video=1280x1024
[    20.713] Build Date: 29 January 2012  03:38:00PM
[    20.713]  
[    20.713] Current version of pixman: 0.24.4
[    20.713]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    20.713] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.713] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 20 20:05:29 2012
[    20.755] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    20.772] (==) No Layout section.  Using the first Screen section.
[    20.772] (==) No screen section available. Using defaults.
[    20.772] (**) |-->Screen "Default Screen Section" (0)
[    20.772] (**) |   |-->Monitor "<default monitor>"
[    20.773] (==) No device specified for screen "Default Screen Section".
        Using the first device section listed.
[    20.773] (**) |   |-->Device "ATI Radeon HD3870"
[    20.773] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    20.773] (==) Automatically adding devices
[    20.773] (==) Automatically enabling devices
[    20.808] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    20.808]    Entry deleted from font path.
[    20.808] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    20.808]    Entry deleted from font path.
[    20.808] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    20.808]    Entry deleted from font path.
[    20.808]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    20.808] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    20.808]    Entry deleted from font path.
[    20.808]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    20.808] (==) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/TTF/
[    20.808] (==) ModulePath set to "/usr/lib/xorg/modules"
[    20.808] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.808] (II) Loader magic: 0x7ccae0
[    20.808] (II) Module ABI versions:
[    20.808]    X.Org ANSI C Emulation: 0.4
[    20.808]    X.Org Video Driver: 11.0
[    20.808]    X.Org XInput driver : 13.0
[    20.808]    X.Org Server Extension : 6.0
[    20.809] (--) PCI:*(0:1:0:0) 1002:9501:1787:2003 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
[    20.809] (II) Open ACPI successful (/var/run/acpid.socket)
[    20.809] (II) LoadModule: "extmod"
[    20.840] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    20.851] (II) Module extmod: vendor="X.Org Foundation"
[    20.851]    compiled for 1.11.4, module version = 1.0.0
[    20.851]    Module class: X.Org Server Extension
[    20.851]    ABI class: X.Org Server Extension, version 6.0
[    20.851] (II) Loading extension MIT-SCREEN-SAVER
[    20.851] (II) Loading extension XFree86-VidModeExtension
[    20.851] (II) Loading extension XFree86-DGA
[    20.851] (II) Loading extension DPMS
[    20.851] (II) Loading extension XVideo
[    20.851] (II) Loading extension XVideo-MotionCompensation
[    20.851] (II) Loading extension X-Resource
[    20.851] (II) LoadModule: "dbe"
[    20.852] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    20.852] (II) Module dbe: vendor="X.Org Foundation"
[    20.852]    compiled for 1.11.4, module version = 1.0.0
[    20.852]    Module class: X.Org Server Extension
[    20.852]    ABI class: X.Org Server Extension, version 6.0
[    20.852] (II) Loading extension DOUBLE-BUFFER
[    20.852] (II) LoadModule: "glx"
[    20.852] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    20.867] (II) Module glx: vendor="X.Org Foundation"
[    20.867]    compiled for 1.11.4, module version = 1.0.0
[    20.867]    ABI class: X.Org Server Extension, version 6.0
[    20.867] (==) AIGLX enabled
[    20.867] (II) Loading extension GLX
[    20.867] (II) LoadModule: "record"
[    20.867] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    20.868] (II) Module record: vendor="X.Org Foundation"
[    20.868]    compiled for 1.11.4, module version = 1.13.0
[    20.868]    Module class: X.Org Server Extension
[    20.868]    ABI class: X.Org Server Extension, version 6.0
[    20.868] (II) Loading extension RECORD
[    20.868] (II) LoadModule: "dri"
[    20.868] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    20.879] (II) Module dri: vendor="X.Org Foundation"
[    20.879]    compiled for 1.11.4, module version = 1.0.0
[    20.879]    ABI class: X.Org Server Extension, version 6.0
[    20.879] (II) Loading extension XFree86-DRI
[    20.879] (II) LoadModule: "dri2"
[    20.880] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    20.880] (II) Module dri2: vendor="X.Org Foundation"
[    20.880]    compiled for 1.11.4, module version = 1.2.0
[    20.880]    ABI class: X.Org Server Extension, version 6.0
[    20.880] (II) Loading extension DRI2
[    20.880] (II) LoadModule: "radeon"
[    20.881] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    20.917] (II) Module radeon: vendor="X.Org Foundation"
[    20.917]    compiled for 1.11.1.902, module version = 6.14.3
[    20.917]    Module class: X.Org Video Driver
[    20.917]    ABI class: X.Org Video Driver, version 11.0
[    20.918] (II) RADEON: Driver for ATI Radeon chipsets:
        ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
        ATI Radeon Mobility X300 (M24) 3152 (PCIE),
        ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
        ATI Radeon X600 (RV380) 3E50 (PCIE),
        ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
        ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
        ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
        ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
        ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
        ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
        ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
        ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
        ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
        ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
        ATI Radeon IGP330M/340M/350M (U2) 4337,
        ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
        ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
        ATI Radeon X800PRO (R420) JI (AGP),
        ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
        ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
        ATI Radeon Mobility 9800 (M18) JN (AGP),
        ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
        ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
        ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
        ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
        ATI Radeon Mobility M7 LW (AGP),
        ATI Mobility FireGL 7800 M7 LX (AGP),
        ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
        ATI FireGL Mobility 9000 (M9) Ld (AGP),
        ATI Radeon Mobility 9000 (M9) Lf (AGP),
        ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
        ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
        ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
        ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
        ATI Radeon 9800XT NJ (AGP),
        ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
        ATI Radeon Mobility 9600 (M10) NQ (AGP),
        ATI Radeon Mobility 9600 (M11) NR (AGP),
        ATI Radeon Mobility 9600 (M10) NS (AGP),
        ATI FireGL Mobility T2 (M10) NT (AGP),
        ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
        ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
        ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
        ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
        ATI Radeon Mobility X300 (M22) 5460 (PCIE),
        ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
        ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
        ATI Radeon X800PRO (R423) UI (PCIE),
        ATI Radeon X800LE (R423) UJ (PCIE),
        ATI Radeon X800SE (R423) UK (PCIE),
        ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
        ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
        ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
        ATI FireGL unknown (R423) UR (PCIE),
        ATI FireGL unknown (R423) UT (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility Radeon X700 XL (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
        ATI Radeon Mobility 9100 IGP (U3) 5835,
        ATI Radeon XPRESS 200 5954 (PCIE),
        ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
        ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
        ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
        ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
        ATI Radeon XPRESS 200M 5975 (PCIE),
        ATI Radeon XPRESS 200 5A41 (PCIE),
        ATI Radeon XPRESS 200M 5A42 (PCIE),
        ATI Radeon XPRESS 200 5A61 (PCIE),
        ATI Radeon XPRESS 200M 5A62 (PCIE),
        ATI Radeon X300 (RV370) 5B60 (PCIE),
        ATI Radeon X600 (RV370) 5B62 (PCIE),
        ATI Radeon X550 (RV370) 5B63 (PCIE),
        ATI FireGL V3100 (RV370) 5B64 (PCIE),
        ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
        ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
        ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
        ATI Mobility Radeon X800 XT (M28) (PCIE),
        ATI Mobility FireGL V5100 (M28) (PCIE),
        ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
        ATI Radeon X850 XT PE (R480) (PCIE),
        ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
        ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
        ATI Radeon X850 XT (R480) (PCIE),
        ATI Radeon X800XT (R423) 5D57 (PCIE),
        ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
        ATI Radeon X700 PRO (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
        ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
        ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
        ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
        ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
        ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
        ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
        ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
        ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
        ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
        ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
        ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
        ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
        ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
        ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
        ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
        ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
        ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
        ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
        ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
        ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
        ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
        ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
        ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
        ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
        ATI Mobility Radeon X1700, ATI Radeon X2300HD,
        ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
        ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
        ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
        ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
        ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
        ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
        ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
        ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
        ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
        ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
        ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
        ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
        ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
        ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
        ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
        ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
        AMD FireStream 9250, ATI FirePro V8700 (FireGL),
        ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
        ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
        ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
        ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
        ATI Mobility Radeon HD 4670, ATI FirePro M5750,
        ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
        ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
        ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
        ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
        ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
        ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
        ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
        ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
        ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
        ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
        ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
        ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
        ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
        ATI Mobility Radeon HD 3850 X2, ATI RV670,
        ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
        ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
        ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
        ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
        ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
        ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
        ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
        ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
        ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
        ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
        ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
        ATI FireGL V3600, ATI Radeon HD 2600 LE,
        ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
        ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
        ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
        ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
        ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
        ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
        ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
        ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
        ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
        ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
        ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
        SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200, ATI Radeon 4100,
        ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
        ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics,
        AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
        AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics,
        AMD Radeon HD 6200 Series Graphics, CYPRESS,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
        AMD Firestream 9350, ATI Radeon HD 5800 Series,
        ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
        ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
        ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
        ATI Mobility Radeon HD 5800 Series,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
        ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
        ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
        ATI Mobility Radeon HD 5000 Series,
        ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
        ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
        ATI Mobility Radeon HD 5000 Series,
        ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
        ATI Mobility Radeon Graphics, CEDAR,
        ATI FirePro (FireGL) Graphics Adapter,
        ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
        ATI Radeon HD 5450, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
        CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, AMD Radeon HD 6900 Series,
        AMD Radeon HD 6900 Series, CAYMAN, CAYMAN, CAYMAN,
        AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
        BARTS, Mobility Radeon HD 6000 Series,
        Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
        AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
        AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
        TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, CAICOS,
        CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
        CAICOS, CAICOS, CAICOS
[    20.922] (++) using VT number 7

[    20.923] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    20.923] (II) [KMS] drm report modesetting isn't supported.
[    20.924] (II) RADEON(0): TOTO SAYS 00000000f5000000
[    20.924] (II) RADEON(0): MMIO registers at 0x00000000f5000000: size 64KB
[    20.924] (II) RADEON(0): PCI bus 1 card 0 func 0
[    20.924] (II) RADEON(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    20.924] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    20.924] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    20.924] (==) RADEON(0): Default visual is TrueColor
[    20.924] (**) RADEON(0): Option "SWcursor" "off"
[    20.924] (**) RADEON(0): Option "AGPMode" "8"
[    20.924] (**) RADEON(0): Option "AGPFastWrite" "off"
[    20.924] (**) RADEON(0): Option "AccelDFS" "on"
[    20.924] (**) RADEON(0): Option "DRI" "off"
[    20.924] (**) RADEON(0): Option "EXAVSync" "off"
[    20.924] (II) Loading sub module "vgahw"
[    20.924] (II) LoadModule: "vgahw"
[    20.924] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    20.939] (II) Module vgahw: vendor="X.Org Foundation"
[    20.939]    compiled for 1.11.4, module version = 0.1.0
[    20.939]    ABI class: X.Org Video Driver, version 11.0
[    20.939] (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[    20.939] (==) RADEON(0): RGB weight 888
[    20.939] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    20.939] (--) RADEON(0): Chipset: "ATI Radeon HD3870" (ChipID = 0x9501)
[    20.939] (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
[    20.939] (II) RADEON(0): PCIE card detected
[    20.939] (II) Loading sub module "int10"
[    20.939] (II) LoadModule: "int10"
[    20.939] (II) Loading /usr/lib/xorg/modules/libint10.so
[    20.942] (II) Module int10: vendor="X.Org Foundation"
[    20.942]    compiled for 1.11.4, module version = 1.0.0
[    20.942]    ABI class: X.Org Video Driver, version 11.0
[    20.942] (II) RADEON(0): initializing int10
[    20.943] (II) RADEON(0): Primary V_BIOS segment is: 0xc000
[    20.943] (II) RADEON(0): ATOM BIOS detected
[    20.944] (II) RADEON(0): ATOM BIOS Rom: 
[    20.944]    SubsystemVendorID: 0x1787 SubsystemID: 0x2003
[    20.944]    IOBaseAddress: 0xb000
[    20.944]    Filename: SX65215.bin 
[    20.944]    BIOS Bootup Message: 
RV670XT PCIE 512M DDR4 DVI-I\VO\DVI-I 1190M/850E                         
[    20.944] (II) RADEON(0): Framebuffer space used by Firmware (kb): 16
[    20.944] (II) RADEON(0): Start of VRAM area used by Firmware: 0x1fffc000
[    20.944] (II) RADEON(0): AtomBIOS requests 16kB of VRAM scratch space
[    20.944] (II) RADEON(0): AtomBIOS VRAM scratch base: 0x1fffc000
[    20.944] (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
[    20.944] (II) RADEON(0): Default Engine Clock: 850000
[    20.944] (II) RADEON(0): Default Memory Clock: 1190000
[    20.944] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
[    20.944] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
[    20.944] (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
[    20.944] (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
[    20.944] (II) RADEON(0): Maximum Pixel Clock: 400000
[    20.944] (II) RADEON(0): Reference Clock: 27000
[    20.944] (II) RADEON(0): Direct rendering forced off
[    20.944] (II) RADEON(0): using shadow framebuffer
[    20.944] (II) Loading sub module "shadow"
[    20.944] (II) LoadModule: "shadow"
[    20.944] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    20.944] (II) Module shadow: vendor="X.Org Foundation"
[    20.944]    compiled for 1.11.4, module version = 1.1.0
[    20.944]    ABI class: X.Org ANSI C Emulation, version 0.4
[    20.944] (II) RADEON(0): Detected total video RAM=524288K, accessible=262144K (PCI BAR=262144K)
[    20.944] (--) RADEON(0): Mapped VideoRAM: 262144 kByte (256 bit DDR SDRAM)
[    20.945] (II) RADEON(0): Color tiling disabled
[    20.945] (II) Loading sub module "ddc"
[    20.945] (II) LoadModule: "ddc"
[    20.945] (II) Module "ddc" already built-in
[    20.945] (II) Loading sub module "i2c"
[    20.945] (II) LoadModule: "i2c"
[    20.945] (II) Module "i2c" already built-in
[    20.945] (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=90000 max=120000; xclk=40000
[    20.945] (II) RADEON(0): Output DVI-1 has no monitor section
[    20.945] (II) RADEON(0): I2C bus "DVI-1" initialized.
[    20.945] (II) RADEON(0): Output DVI-0 has no monitor section
[    20.945] (II) RADEON(0): I2C bus "DVI-0" initialized.
[    20.945] (II) RADEON(0): Port0:
[    20.945]   XRANDR name: DVI-1
[    20.945]   Connector: DVI-I
[    20.945]   CRT2: INTERNAL_KLDSCP_DAC2
[    20.945]   DFP1: INTERNAL_KLDSCP_TMDS1
[    20.945]   DDC reg: 0x7e50
[    20.945] (II) RADEON(0): Port1:
[    20.945]   XRANDR name: DVI-0
[    20.945]   Connector: DVI-I
[    20.945]   CRT1: INTERNAL_KLDSCP_DAC1
[    20.945]   DFP2: INTERNAL_LVTM1
[    20.945]   DDC reg: 0x7e40
[    20.945] (II) RADEON(0): I2C device "DVI-1:ddc2" registered at address 0xA0.
[    20.994] (II) RADEON(0): EDID for output DVI-1
[    20.994] (II) RADEON(0): Manufacturer: ENC  Model: 1786  Serial#: 16843009
[    20.994] (II) RADEON(0): Year: 2006  Week: 4
[    20.994] (II) RADEON(0): EDID Version: 1.3
[    20.994] (II) RADEON(0): Digital Display Input
[    20.994] (II) RADEON(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    20.994] (II) RADEON(0): Gamma: 2.20
[    20.994] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[    20.994] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    20.994] (II) RADEON(0): First detailed timing is preferred mode
[    20.994] (II) RADEON(0): redX: 0.640 redY: 0.330   greenX: 0.290 greenY: 0.605
[    20.994] (II) RADEON(0): blueX: 0.145 blueY: 0.075   whiteX: 0.313 whiteY: 0.329
[    20.994] (II) RADEON(0): Supported established timings:
[    20.994] (II) RADEON(0): 720x400@70Hz
[    20.994] (II) RADEON(0): 640x480@60Hz
[    20.994] (II) RADEON(0): 800x600@60Hz
[    20.994] (II) RADEON(0): 1024x768@60Hz
[    20.994] (II) RADEON(0): Manufacturer's mask: 0
[    20.995] (II) RADEON(0): Supported standard timings:
[    20.995] (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    20.995] (II) RADEON(0): Supported detailed timing:
[    20.995] (II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    20.995] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    20.995] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    20.995] (II) RADEON(0): Serial No: 51173016
[    20.995] (II) RADEON(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 64 kHz, PixClock max 115 MHz
[    20.995] (II) RADEON(0): Monitor name: S1910
[    20.995] (II) RADEON(0): EDID (in hex):
[    20.995] (II) RADEON(0):    00ffffffffffff0015c3861701010101
[    20.995] (II) RADEON(0):    0410010380261e78eae415a3544a9b25
[    20.995] (II) RADEON(0):    135054a1080081800101010101010101
[    20.995] (II) RADEON(0):    010101010101302a009851002a403070
[    20.995] (II) RADEON(0):    1300782d1100001e000000ff00353131
[    20.995] (II) RADEON(0):    37333031360a20202020000000fd003b
[    20.995] (II) RADEON(0):    3d1f400b000a202020202020000000fc
[    20.995] (II) RADEON(0):    0053313931300a2020202020202000e4
[    20.995] (II) RADEON(0): EDID vendor "ENC", prod id 6022
[    20.995] (II) RADEON(0): Using EDID range info for horizontal sync
[    20.995] (II) RADEON(0): Using EDID range info for vertical refresh
[    20.995] (II) RADEON(0): Printing DDC gathered Modelines:
[    20.995] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    20.995] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    20.995] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    20.995] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    20.995] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    20.995] (II) RADEON(0): Output: DVI-1, Detected Monitor Type: 3
[    20.995] (II) RADEON(0): EDID data from the display on output: DVI-1 ----------------------
[    20.995] (II) RADEON(0): Manufacturer: ENC  Model: 1786  Serial#: 16843009
[    20.995] (II) RADEON(0): Year: 2006  Week: 4
[    20.995] (II) RADEON(0): EDID Version: 1.3
[    20.995] (II) RADEON(0): Digital Display Input
[    20.995] (II) RADEON(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    20.995] (II) RADEON(0): Gamma: 2.20
[    20.995] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[    20.995] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    20.995] (II) RADEON(0): First detailed timing is preferred mode
[    20.995] (II) RADEON(0): redX: 0.640 redY: 0.330   greenX: 0.290 greenY: 0.605
[    20.995] (II) RADEON(0): blueX: 0.145 blueY: 0.075   whiteX: 0.313 whiteY: 0.329
[    20.995] (II) RADEON(0): Supported established timings:
[    20.995] (II) RADEON(0): 720x400@70Hz
[    20.995] (II) RADEON(0): 640x480@60Hz
[    20.995] (II) RADEON(0): 800x600@60Hz
[    20.995] (II) RADEON(0): 1024x768@60Hz
[    20.995] (II) RADEON(0): Manufacturer's mask: 0
[    20.995] (II) RADEON(0): Supported standard timings:
[    20.995] (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    20.995] (II) RADEON(0): Supported detailed timing:
[    20.995] (II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    20.995] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    20.995] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    20.995] (II) RADEON(0): Serial No: 51173016
[    20.995] (II) RADEON(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 64 kHz, PixClock max 115 MHz
[    20.995] (II) RADEON(0): Monitor name: S1910
[    20.995] (II) RADEON(0): EDID (in hex):
[    20.995] (II) RADEON(0):    00ffffffffffff0015c3861701010101
[    20.995] (II) RADEON(0):    0410010380261e78eae415a3544a9b25
[    20.995] (II) RADEON(0):    135054a1080081800101010101010101
[    20.995] (II) RADEON(0):    010101010101302a009851002a403070
[    20.995] (II) RADEON(0):    1300782d1100001e000000ff00353131
[    20.995] (II) RADEON(0):    37333031360a20202020000000fd003b
[    20.995] (II) RADEON(0):    3d1f400b000a202020202020000000fc
[    20.995] (II) RADEON(0):    0053313931300a2020202020202000e4
[    20.995] finished output detect: 0
[    20.995] (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
[    21.004] Dac detection success
[    21.004] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[    21.004] Unhandled monitor type 0
[    21.004] finished output detect: 1
[    21.004] finished all detect
[    21.053] (II) RADEON(0): EDID for output DVI-1
[    21.053] (II) RADEON(0): Manufacturer: ENC  Model: 1786  Serial#: 16843009
[    21.053] (II) RADEON(0): Year: 2006  Week: 4
[    21.053] (II) RADEON(0): EDID Version: 1.3
[    21.053] (II) RADEON(0): Digital Display Input
[    21.053] (II) RADEON(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    21.053] (II) RADEON(0): Gamma: 2.20
[    21.053] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[    21.053] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    21.053] (II) RADEON(0): First detailed timing is preferred mode
[    21.053] (II) RADEON(0): redX: 0.640 redY: 0.330   greenX: 0.290 greenY: 0.605
[    21.054] (II) RADEON(0): blueX: 0.145 blueY: 0.075   whiteX: 0.313 whiteY: 0.329
[    21.054] (II) RADEON(0): Supported established timings:
[    21.054] (II) RADEON(0): 720x400@70Hz
[    21.054] (II) RADEON(0): 640x480@60Hz
[    21.054] (II) RADEON(0): 800x600@60Hz
[    21.054] (II) RADEON(0): 1024x768@60Hz
[    21.054] (II) RADEON(0): Manufacturer's mask: 0
[    21.054] (II) RADEON(0): Supported standard timings:
[    21.054] (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    21.054] (II) RADEON(0): Supported detailed timing:
[    21.054] (II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    21.054] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    21.054] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    21.054] (II) RADEON(0): Serial No: 51173016
[    21.054] (II) RADEON(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 64 kHz, PixClock max 115 MHz
[    21.054] (II) RADEON(0): Monitor name: S1910
[    21.054] (II) RADEON(0): EDID (in hex):
[    21.054] (II) RADEON(0):    00ffffffffffff0015c3861701010101
[    21.054] (II) RADEON(0):    0410010380261e78eae415a3544a9b25
[    21.054] (II) RADEON(0):    135054a1080081800101010101010101
[    21.054] (II) RADEON(0):    010101010101302a009851002a403070
[    21.054] (II) RADEON(0):    1300782d1100001e000000ff00353131
[    21.054] (II) RADEON(0):    37333031360a20202020000000fd003b
[    21.054] (II) RADEON(0):    3d1f400b000a202020202020000000fc
[    21.054] (II) RADEON(0):    0053313931300a2020202020202000e4
[    21.054] (II) RADEON(0): EDID vendor "ENC", prod id 6022
[    21.054] (II) RADEON(0): Using hsync ranges from config file
[    21.054] (II) RADEON(0): Using vrefresh ranges from config file
[    21.054] (II) RADEON(0): Printing DDC gathered Modelines:
[    21.054] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    21.054] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    21.054] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    21.054] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    21.054] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    21.054] (II) RADEON(0): Output: DVI-1, Detected Monitor Type: 3
[    21.054] (II) RADEON(0): EDID data from the display on output: DVI-1 ----------------------
[    21.054] (II) RADEON(0): Manufacturer: ENC  Model: 1786  Serial#: 16843009
[    21.054] (II) RADEON(0): Year: 2006  Week: 4
[    21.054] (II) RADEON(0): EDID Version: 1.3
[    21.054] (II) RADEON(0): Digital Display Input
[    21.054] (II) RADEON(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    21.054] (II) RADEON(0): Gamma: 2.20
[    21.054] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[    21.054] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    21.054] (II) RADEON(0): First detailed timing is preferred mode
[    21.054] (II) RADEON(0): redX: 0.640 redY: 0.330   greenX: 0.290 greenY: 0.605
[    21.054] (II) RADEON(0): blueX: 0.145 blueY: 0.075   whiteX: 0.313 whiteY: 0.329
[    21.054] (II) RADEON(0): Supported established timings:
[    21.054] (II) RADEON(0): 720x400@70Hz
[    21.054] (II) RADEON(0): 640x480@60Hz
[    21.054] (II) RADEON(0): 800x600@60Hz
[    21.054] (II) RADEON(0): 1024x768@60Hz
[    21.054] (II) RADEON(0): Manufacturer's mask: 0
[    21.054] (II) RADEON(0): Supported standard timings:
[    21.054] (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    21.054] (II) RADEON(0): Supported detailed timing:
[    21.054] (II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    21.054] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    21.054] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    21.054] (II) RADEON(0): Serial No: 51173016
[    21.054] (II) RADEON(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 64 kHz, PixClock max 115 MHz
[    21.054] (II) RADEON(0): Monitor name: S1910
[    21.054] (II) RADEON(0): EDID (in hex):
[    21.054] (II) RADEON(0):    00ffffffffffff0015c3861701010101
[    21.054] (II) RADEON(0):    0410010380261e78eae415a3544a9b25
[    21.054] (II) RADEON(0):    135054a1080081800101010101010101
[    21.054] (II) RADEON(0):    010101010101302a009851002a403070
[    21.054] (II) RADEON(0):    1300782d1100001e000000ff00353131
[    21.054] (II) RADEON(0):    37333031360a20202020000000fd003b
[    21.054] (II) RADEON(0):    3d1f400b000a202020202020000000fc
[    21.054] (II) RADEON(0):    0053313931300a2020202020202000e4
[    21.054] (II) RADEON(0): Panel infos found from DDC detailed: 1280x1024
[    21.054] (II) RADEON(0): EDID vendor "ENC", prod id 6022
[    21.054] (II) RADEON(0): Printing probed modes for output DVI-1
[    21.054] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    21.054] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    21.054] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    21.054] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    21.054] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    21.063] Dac detection success
[    21.063] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[    21.063] Unhandled monitor type 0
[    21.063] (II) RADEON(0): EDID for output DVI-0
[    21.063] (II) RADEON(0): Output DVI-1 connected
[    21.063] (II) RADEON(0): Output DVI-0 disconnected
[    21.063] (II) RADEON(0): Using exact sizes for initial modes
[    21.063] (II) RADEON(0): Output DVI-1 using initial mode 1280x1024
[    21.063] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    21.063] (**) RADEON(0): Display dimensions: (380, 300) mm
[    21.063] (**) RADEON(0): DPI set to (85, 108)
[    21.063] (II) Loading sub module "fb"
[    21.063] (II) LoadModule: "fb"
[    21.063] (II) Loading /usr/lib/xorg/modules/libfb.so
[    21.064] (II) Module fb: vendor="X.Org Foundation"
[    21.064]    compiled for 1.11.4, module version = 1.0.0
[    21.064]    ABI class: X.Org ANSI C Emulation, version 0.4
[    21.064] (II) Loading sub module "ramdac"
[    21.065] (II) LoadModule: "ramdac"
[    21.065] (II) Module "ramdac" already built-in
[    21.065] (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
[    21.065] (--) Depth 24 pixmap format is 32 bpp
[    21.065] (II) RADEON(0): RADEONScreenInit e0000000 0 0
[    21.187] Output DFP1 disable success
[    21.191] Blank CRTC 0 success
[    21.208] Disable CRTC 0 success
[    21.208] Blank CRTC 1 success
[    21.208] Disable CRTC 1 success
[    21.208] (II) RADEON(0): Dynamic Power Management Disabled
[    21.209] mc fb loc is 00ff00e0
[    21.209] (II) RADEON(0): RADEONInitMemoryMap() : 
[    21.209] (II) RADEON(0):   mem_size         : 0x20000000
[    21.209] (II) RADEON(0):   MC_FB_LOCATION   : 0x00ff00e0
[    21.209] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[    21.209] (II) RADEON(0): Depth moves disabled by default
[    21.209] (II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
[    21.209] (II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
[    21.209] (II) RADEON(0): Largest offscreen area available: 1280 x 6909
[    21.210] (II) RADEON(0): RADEONRestoreMemMapRegisters() : 
[    21.210] (II) RADEON(0):   MC_FB_LOCATION   : 0x00ff00e0 0x00ff00e0
[    21.210] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[    21.220] (==) RADEON(0): Backing store disabled
[    21.220] (WW) RADEON(0): Direct rendering disabled
[    21.220] (EE) RADEON(0): Acceleration initialization failed
[    21.220] (II) RADEON(0): Acceleration disabled
[    21.220] (==) RADEON(0): DPMS enabled
[    21.220] (==) RADEON(0): Silken mouse enabled
[    21.220] (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
[    21.220] (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
[    21.220] (II) RADEON(0): Largest offscreen area available: 1280 x 6901
[    21.220] (II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
[    21.222] Output DFP1 disable success
[    21.222] Blank CRTC 0 success
[    21.223] Disable CRTC 0 success
[    21.223] Blank CRTC 1 success
[    21.223] Disable CRTC 1 success
[    21.234] Output DFP1 disable success
[    21.234] Blank CRTC 0 success
[    21.234] Disable CRTC 0 success
[    21.234] Set CRTC 0 Source success
[    21.234] Mode 1280x1024 - 1688 1066 5
[    21.234] (II) RADEON(0): RADEONRestoreMemMapRegisters() : 
[    21.234] (II) RADEON(0):   MC_FB_LOCATION   : 0x00ff00e0 0x00ff00e0
[    21.234] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[    21.244] Picked PLL 0
[    21.244] best_freq: 108000
[    21.244] best_feedback_div: 88
[    21.244] best_frac_feedback_div: 0
[    21.244] best_ref_div: 2
[    21.244] best_post_div: 11
[    21.244] (II) RADEON(0): crtc(0) Clock: mode 108000, PLL 1080000
[    21.244] (II) RADEON(0): crtc(0) PLL  : refdiv 2, fbdiv 0x58(88), fracfbdiv 0, pdiv 11
[    21.246] Set CRTC 0 PLL success
[    21.247] Set CRTC Timing success
[    21.247] Set CRTC 0 Overscan success
[    21.247] Not using RMX
[    21.247] scaler 0 setup success
[    21.247] Set CRTC 0 Source success
[    21.247] crtc 0 YUV disable setup success
[    21.247] (II) RADEON(0): Coherent Mode enabled
[    21.248] Output digital setup success
[    21.248] Output DFP1 enable success
[    21.248] Enable CRTC 0 success
[    21.248] Unblank CRTC 0 success
[    21.248] Blank CRTC 1 success
[    21.248] Disable CRTC 1 success
[    21.248] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    21.248] Output DFP1 disable success
[    21.248] Blank CRTC 0 success
[    21.264] Disable CRTC 0 success
[    21.264] Set CRTC 0 Source success
[    21.264] Mode 1280x1024 - 1688 1066 5
[    21.264] (II) RADEON(0): RADEONRestoreMemMapRegisters() : 
[    21.264] (II) RADEON(0):   MC_FB_LOCATION   : 0x00ff00e0 0x00ff00e0
[    21.264] (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
[    21.274] Picked PLL 0
[    21.274] best_freq: 108000
[    21.274] best_feedback_div: 88
[    21.275] best_frac_feedback_div: 0
[    21.275] best_ref_div: 2
[    21.275] best_post_div: 11
[    21.275] (II) RADEON(0): crtc(0) Clock: mode 108000, PLL 1080000
[    21.275] (II) RADEON(0): crtc(0) PLL  : refdiv 2, fbdiv 0x58(88), fracfbdiv 0, pdiv 11
[    21.275] Set CRTC 0 PLL success
[    21.275] Set CRTC Timing success
[    21.275] Set CRTC 0 Overscan success
[    21.275] Not using RMX
[    21.275] scaler 0 setup success
[    21.275] Set CRTC 0 Source success
[    21.275] crtc 0 YUV disable setup success
[    21.275] (II) RADEON(0): Coherent Mode enabled
[    21.275] Output digital setup success
[    21.275] Output DFP1 enable success
[    21.275] Enable CRTC 0 success
[    21.275] Unblank CRTC 0 success
[    21.275] (--) RandR disabled
[    21.275] (II) Initializing built-in extension Generic Event Extension
[    21.275] (II) Initializing built-in extension SHAPE
[    21.275] (II) Initializing built-in extension MIT-SHM
[    21.275] (II) Initializing built-in extension XInputExtension
[    21.275] (II) Initializing built-in extension XTEST
[    21.275] (II) Initializing built-in extension BIG-REQUESTS
[    21.275] (II) Initializing built-in extension SYNC
[    21.275] (II) Initializing built-in extension XKEYBOARD
[    21.275] (II) Initializing built-in extension XC-MISC
[    21.275] (II) Initializing built-in extension SECURITY
[    21.275] (II) Initializing built-in extension XINERAMA
[    21.275] (II) Initializing built-in extension XFIXES
[    21.275] (II) Initializing built-in extension RENDER
[    21.275] (II) Initializing built-in extension RANDR
[    21.275] (II) Initializing built-in extension COMPOSITE
[    21.275] (II) Initializing built-in extension DAMAGE
[    21.282] (II) AIGLX: Screen 0 is not DRI2 capable
[    21.282] (II) AIGLX: Screen 0 is not DRI capable
[    21.563] (II) AIGLX: Loaded and initialized swrast
[    21.563] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    21.563] (II) RADEON(0): Setting screen physical size to 338 x 270
[    21.891] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    21.891] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    21.891] (II) LoadModule: "evdev"
[    21.891] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    21.897] (II) Module evdev: vendor="X.Org Foundation"
[    21.897]    compiled for 1.10.99.902, module version = 2.6.0
[    21.897]    Module class: X.Org XInput Driver
[    21.897]    ABI class: X.Org XInput driver, version 13.0
[    21.897] (II) Using input driver 'evdev' for 'Power Button'
[    21.897] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    21.897] (**) Power Button: always reports core events
[    21.897] (**) Power Button: Device: "/dev/input/event4"
[    21.897] (--) Power Button: Found keys
[    21.897] (II) Power Button: Configuring as keyboard
[    21.897] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    21.897] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    21.897] (**) Option "xkb_rules" "evdev"
[    21.897] (**) Option "xkb_model" "evdev"
[    21.897] (**) Option "xkb_layout" "us"
[    22.035] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    22.035] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    22.035] (II) Using input driver 'evdev' for 'Power Button'
[    22.035] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.035] (**) Power Button: always reports core events
[    22.035] (**) Power Button: Device: "/dev/input/event3"
[    22.035] (--) Power Button: Found keys
[    22.035] (II) Power Button: Configuring as keyboard
[    22.035] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[    22.035] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    22.035] (**) Option "xkb_rules" "evdev"
[    22.035] (**) Option "xkb_model" "evdev"
[    22.035] (**) Option "xkb_layout" "us"
[    22.036] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event7)
[    22.036] (II) No input driver specified, ignoring this device.
[    22.036] (II) This device may have been added with another device file.
[    22.036] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[    22.036] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    22.036] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    22.036] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.036] (**) Logitech USB Receiver: always reports core events
[    22.036] (**) Logitech USB Receiver: Device: "/dev/input/event1"
[    22.036] (--) Logitech USB Receiver: Found 20 mouse buttons
[    22.036] (--) Logitech USB Receiver: Found scroll wheel(s)
[    22.036] (--) Logitech USB Receiver: Found relative axes
[    22.036] (--) Logitech USB Receiver: Found x and y relative axes
[    22.036] (II) Logitech USB Receiver: Configuring as mouse
[    22.036] (II) Logitech USB Receiver: Adding scrollwheel support
[    22.036] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    22.036] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    22.036] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input1/event1"
[    22.036] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[    22.036] (II) Logitech USB Receiver: initialized for relative axes.
[    22.037] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    22.037] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    22.037] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    22.037] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    22.037] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    22.037] (II) No input driver specified, ignoring this device.
[    22.037] (II) This device may have been added with another device file.
[    22.037] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[    22.037] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    22.037] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    22.037] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.037] (**) Logitech USB Receiver: always reports core events
[    22.037] (**) Logitech USB Receiver: Device: "/dev/input/event2"
[    22.037] (--) Logitech USB Receiver: Found 1 mouse buttons
[    22.037] (--) Logitech USB Receiver: Found scroll wheel(s)
[    22.037] (--) Logitech USB Receiver: Found relative axes
[    22.037] (--) Logitech USB Receiver: Found absolute axes
[    22.037] (--) Logitech USB Receiver: Found keys
[    22.037] (II) Logitech USB Receiver: Configuring as mouse
[    22.037] (II) Logitech USB Receiver: Configuring as keyboard
[    22.037] (II) Logitech USB Receiver: Adding scrollwheel support
[    22.038] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    22.038] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    22.038] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input2/event2"
[    22.038] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[    22.038] (**) Option "xkb_rules" "evdev"
[    22.038] (**) Option "xkb_model" "evdev"
[    22.038] (**) Option "xkb_layout" "us"
[    22.038] (EE) Logitech USB Receiver: failed to initialize for relative axes.
[    22.038] (II) Logitech USB Receiver: initialized for absolute axes.
[    22.038] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    22.038] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    22.038] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    22.038] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    22.038] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event6)
[    22.038] (II) No input driver specified, ignoring this device.
[    22.038] (II) This device may have been added with another device file.
[    22.039] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    22.039] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    22.039] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    22.039] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    22.039] (**) AT Translated Set 2 keyboard: always reports core events
[    22.039] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    22.039] (--) AT Translated Set 2 keyboard: Found keys
[    22.039] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    22.039] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    22.039] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    22.039] (**) Option "xkb_rules" "evdev"
[    22.039] (**) Option "xkb_model" "evdev"
[    22.039] (**) Option "xkb_layout" "us"
[    22.039] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    22.039] (II) No input driver specified, ignoring this device.
[    22.039] (II) This device may have been added with another device file.
[    36.958] (II) RADEON(0): EDID vendor "ENC", prod id 6022
[    36.958] (II) RADEON(0): Using hsync ranges from config file
[    36.958] (II) RADEON(0): Using vrefresh ranges from config file
[    36.958] (II) RADEON(0): Printing DDC gathered Modelines:
[    36.958] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    36.958] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    36.958] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    36.958] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    36.958] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    36.958] (II) RADEON(0): Output: DVI-1, Detected Monitor Type: 3
[    36.958] (II) RADEON(0): EDID data from the display on output: DVI-1 ----------------------
[    36.958] (II) RADEON(0): Manufacturer: ENC  Model: 1786  Serial#: 16843009
[    36.958] (II) RADEON(0): Year: 2006  Week: 4
[    36.958] (II) RADEON(0): EDID Version: 1.3
[    36.958] (II) RADEON(0): Digital Display Input
[    36.958] (II) RADEON(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    36.958] (II) RADEON(0): Gamma: 2.20
[    36.958] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[    36.958] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    36.958] (II) RADEON(0): First detailed timing is preferred mode
[    36.958] (II) RADEON(0): redX: 0.640 redY: 0.330   greenX: 0.290 greenY: 0.605
[    36.958] (II) RADEON(0): blueX: 0.145 blueY: 0.075   whiteX: 0.313 whiteY: 0.329
[    36.958] (II) RADEON(0): Supported established timings:
[    36.958] (II) RADEON(0): 720x400@70Hz
[    36.958] (II) RADEON(0): 640x480@60Hz
[    36.958] (II) RADEON(0): 800x600@60Hz
[    36.958] (II) RADEON(0): 1024x768@60Hz
[    36.958] (II) RADEON(0): Manufacturer's mask: 0
[    36.958] (II) RADEON(0): Supported standard timings:
[    36.958] (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    36.958] (II) RADEON(0): Supported detailed timing:
[    36.958] (II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    36.958] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    36.958] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    36.958] (II) RADEON(0): Serial No: 51173016
[    36.958] (II) RADEON(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 64 kHz, PixClock max 115 MHz
[    36.958] (II) RADEON(0): Monitor name: S1910
[    36.958] (II) RADEON(0): EDID (in hex):
[    36.958] (II) RADEON(0):    00ffffffffffff0015c3861701010101
[    36.958] (II) RADEON(0):    0410010380261e78eae415a3544a9b25
[    36.958] (II) RADEON(0):    135054a1080081800101010101010101
[    36.958] (II) RADEON(0):    010101010101302a009851002a403070
[    36.959] (II) RADEON(0):    1300782d1100001e000000ff00353131
[    36.959] (II) RADEON(0):    37333031360a20202020000000fd003b
[    36.959] (II) RADEON(0):    3d1f400b000a202020202020000000fc
[    36.959] (II) RADEON(0):    0053313931300a2020202020202000e4
[    36.959] (II) RADEON(0): EDID vendor "ENC", prod id 6022
[    36.967] Dac detection success
[    36.967] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[    36.967] Unhandled monitor type 0
[    54.523] (II) RADEON(0): EDID vendor "ENC", prod id 6022
[    54.523] (II) RADEON(0): Using hsync ranges from config file
[    54.523] (II) RADEON(0): Using vrefresh ranges from config file
[    54.523] (II) RADEON(0): Printing DDC gathered Modelines:
[    54.523] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    54.523] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    54.523] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    54.523] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    54.523] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    54.523] (II) RADEON(0): Output: DVI-1, Detected Monitor Type: 3
[    54.523] (II) RADEON(0): EDID data from the display on output: DVI-1 ----------------------
[    54.523] (II) RADEON(0): Manufacturer: ENC  Model: 1786  Serial#: 16843009
[    54.523] (II) RADEON(0): Year: 2006  Week: 4
[    54.523] (II) RADEON(0): EDID Version: 1.3
[    54.523] (II) RADEON(0): Digital Display Input
[    54.523] (II) RADEON(0): Max Image Size [cm]: horiz.: 38  vert.: 30
[    54.523] (II) RADEON(0): Gamma: 2.20
[    54.523] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[    54.523] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    54.523] (II) RADEON(0): First detailed timing is preferred mode
[    54.523] (II) RADEON(0): redX: 0.640 redY: 0.330   greenX: 0.290 greenY: 0.605
[    54.523] (II) RADEON(0): blueX: 0.145 blueY: 0.075   whiteX: 0.313 whiteY: 0.329
[    54.523] (II) RADEON(0): Supported established timings:
[    54.523] (II) RADEON(0): 720x400@70Hz
[    54.523] (II) RADEON(0): 640x480@60Hz
[    54.523] (II) RADEON(0): 800x600@60Hz
[    54.523] (II) RADEON(0): 1024x768@60Hz
[    54.523] (II) RADEON(0): Manufacturer's mask: 0
[    54.523] (II) RADEON(0): Supported standard timings:
[    54.523] (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    54.523] (II) RADEON(0): Supported detailed timing:
[    54.523] (II) RADEON(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
[    54.523] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[    54.523] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[    54.524] (II) RADEON(0): Serial No: 51173016
[    54.524] (II) RADEON(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 64 kHz, PixClock max 115 MHz
[    54.524] (II) RADEON(0): Monitor name: S1910
[    54.524] (II) RADEON(0): EDID (in hex):
[    54.524] (II) RADEON(0):    00ffffffffffff0015c3861701010101
[    54.524] (II) RADEON(0):    0410010380261e78eae415a3544a9b25
[    54.524] (II) RADEON(0):    135054a1080081800101010101010101
[    54.524] (II) RADEON(0):    010101010101302a009851002a403070
[    54.524] (II) RADEON(0):    1300782d1100001e000000ff00353131
[    54.524] (II) RADEON(0):    37333031360a20202020000000fd003b
[    54.524] (II) RADEON(0):    3d1f400b000a202020202020000000fc
[    54.524] (II) RADEON(0):    0053313931300a2020202020202000e4
[    54.524] (II) RADEON(0): EDID vendor "ENC", prod id 6022
[    54.532] Dac detection success
[    54.532] (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
[    54.532] Unhandled monitor type 0

safrax · 2012-02-21 01:04:39

Have you tried the catalyst driver?

lutherus · 2012-02-21 05:56:16

Don`t. Just don`t use the catalyst driver. This is my laptop screen with the catalyst driver, curently watching Star wars : Return of the Jedi
http://www.pohrani.com/f/1T/11T/QWXGplO … 083910.jpg

noejoe · 2012-02-21 18:40:09

Thanks for the responses, but catalyst/fglrx never was an option for me.

Today I changed my graphics card, still had an ATI HD2600XT lying around here.
Now everything works perfectly, must have been some hardware fault with the other card, although it worked as it should in Windows 7.

Right now quite happy with kms and gallium

Arch Linux

#1 2012-02-20 20:54:05

radeon / kms / dri problems

#2 2012-02-21 01:04:39

Re: radeon / kms / dri problems

#3 2012-02-21 05:56:16

Re: radeon / kms / dri problems

#4 2012-02-21 18:40:09

Re: radeon / kms / dri problems

Board footer