You are not logged in.
- Topics: Active | Unanswered
#1 2012-02-12 14:08:18
- fredbezies
- Member
- Registered: 2011-07-28
- Posts: 357
Xorg 1.12 : no problem so far :)
Hello.
Just upgraded my laptop to run xorg 1.12 from testing, with nvidia driver 295.17.
Booted ok, gnome-shell loaded ok.
Here is my laptop lspci :
00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2)
00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2)
00:01.3 Co-processor: NVIDIA Corporation MCP67 Co-processor (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1)
00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2)
00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2)
00:0a.0 Ethernet controller: NVIDIA Corporation MCP67 Ethernet (rev a2)
00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2)
00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2)
00:12.0 VGA compatible controller: NVIDIA Corporation C67 [GeForce 7000M / nForce 610M] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:04.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
01:04.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
01:04.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
01:04.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
05:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)Offline
#2 2012-02-12 17:14:46
- aboe
- Member
- From: Netherlands
- Registered: 2006-10-23
- Posts: 19
Re: Xorg 1.12 : no problem so far :)
Thanks for your report, I have updated my desktop as well:
$ lspci output:
00:00.0 Host bridge: Intel Corporation 82X38/X48 Express DRAM Controller (rev 01)
00:01.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Primary PCI Express Bridge (rev 01)
00:06.0 PCI bridge: Intel Corporation 82X38/X48 Express Host-Secondary PCI Express Bridge (rev 01)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation GF110 [GeForce GTX 560 Ti] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio Controller (rev a1)
04:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)Snippet from xorg.0.log:
[ 15.177]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 15.177]
X.Org X Server 1.11.99.903 (1.12.0 RC 3)
Release Date: 2012-02-11
[ 15.177] X Protocol Version 11, Revision 0
[ 15.177] Build Operating System: Linux 3.2.5-1-ARCH x86_64
[ 15.177] Current Operating System: Linux spectre 3.2.5-1-ARCH #1 SMP PREEMPT Tue Feb 7 08:34:36 CET 2012 x86_64
[ 15.177] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=354b78e4-b800-4c8c-8b6d-2eecbf5d7387 ro quiet init=/bin/systemd
[ 15.177] Build Date: 11 February 2012 09:03:40AM
[ 15.177]Al is working fine. no problems so far.
Offline
#3 2012-02-13 07:52:03
- Paul-S
- Member
- From: Wales
- Registered: 2008-02-04
- Posts: 353
Re: Xorg 1.12 : no problem so far :)
Most things are working ok, except for the synaptic problems that Thomas mentioned on the dev mailing list
Cheers
Paul-S
Offline
#4 2012-02-13 09:20:55
- Gusar
- Member
- Registered: 2009-08-25
- Posts: 3,605
Re: Xorg 1.12 : no problem so far :)
Paul-S wrote:
Most things are working ok, except for the synaptic problems that Thomas mentioned on the dev mailing list
Seems to affect only ALPS touchpads though. My netbook has a synaptics touchpad and I don't have any issues.
Offline
#5 2012-02-13 09:45:43
- ngoonee
- Forum Fellow
- From: Between Thailand and Singapore
- Registered: 2009-03-17
- Posts: 7,358
Re: Xorg 1.12 : no problem so far :)
Gusar wrote:
Paul-S wrote:Most things are working ok, except for the synaptic problems that Thomas mentioned on the dev mailing list
Seems to affect only ALPS touchpads though. My netbook has a synaptics touchpad and I don't have any issues.
Ditto on my synaptics. nvidia-beta (from the AUR) is just fine as well.
Allan-Volunteer on the (topic being discussed) mailn lists. You never get the people who matters attention on the forums.
jasonwryan-Installing Arch is a measure of your literacy. Maintaining Arch is a measure of your diligence. Contributing to Arch is a measure of your competence.
Griemak-Bleeding edge, not bleeding flat. Edge denotes falls will occur from time to time. Bring your own parachute.
Offline
#6 2012-02-13 19:53:01
- aboe
- Member
- From: Netherlands
- Registered: 2006-10-23
- Posts: 19
Re: Xorg 1.12 : no problem so far :)
Just checked if my wacom Bamboo Pen & Touch CTH460 works:
$ lsusb:
Bus 004 Device 002: ID 1532:0109 Razer USA, Ltd Lycosa Keyboard
Bus 005 Device 002: ID 1532:000c Razer USA, Ltd Lachesis Mouse
Bus 004 Device 003: ID 056a:00d1 Wacom Co., Ltd Bamboo Pen & Touch (CTH-460-DE)It works out of the box, without udev rules only /etc/xorg.conf.d/50-wacom.conf
2FG scrolling works, Pen, eraser functioning, and 2 out of the 4 expresskeys.
More fun, pinch zoom functions my browser (google chrome (dev build from aur))
This is from the Xorg.0.log:
[ 6506.987] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pen (/dev/input/event12)
[ 6506.987] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "evdev tablet catchall"
[ 6506.988] (**) Wacom Bamboo 2FG 4x5 Pen: Applying InputClass "Wacom class"
[ 6506.988] (II) LoadModule: "wacom"
[ 6506.988] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 6507.001] (II) Module wacom: vendor="X.Org Foundation"
[ 6507.001] compiled for 1.11.99.902, module version = 0.13.0
[ 6507.001] Module class: X.Org XInput Driver
[ 6507.001] ABI class: X.Org XInput driver, version 16.0
[ 6507.001] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Pen'
[ 6507.001] Option "StopBits" "1"
[ 6507.001] Option "DataBits" "8"
[ 6507.001] Option "Parity" "None"
[ 6507.001] Option "Vmin" "1"
[ 6507.001] Option "Vtime" "10"
[ 6507.001] Option "FlowControl" "Xoff"
[ 6507.001] Option "_source" "server/udev"
[ 6507.001] Option "name" "Wacom Bamboo 2FG 4x5 Pen"
[ 6507.001] Option "path" "/dev/input/event12"
[ 6507.001] Option "device" "/dev/input/event12"
[ 6507.001] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input12/event12"
[ 6507.001] Option "driver" "wacom"
[ 6507.001] (**) Wacom Bamboo 2FG 4x5 Pen: always reports core events
[ 6507.001] (**) Option "Device" "/dev/input/event12"
[ 6507.001] (**) Option "Device" "/dev/input/event12"
[ 6507.001] (II) Wacom Bamboo 2FG 4x5 Pen: type not specified, assuming 'stylus'.
[ 6507.001] (II) Wacom Bamboo 2FG 4x5 Pen: other types will be automatically added.
[ 6507.001] (--) Wacom Bamboo 2FG 4x5 Pen stylus: using pressure threshold of 27 for button 1
[ 6507.001] (--) Wacom Bamboo 2FG 4x5 Pen stylus: Wacom USB Bamboo tablet maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000 tilt=disabled
[ 6507.001] (II) Wacom Bamboo 2FG 4x5 Pen stylus: hotplugging dependent devices.
[ 6507.001] (EE) Wacom Bamboo 2FG 4x5 Pen stylus: Invalid type 'cursor' for this device.
[ 6507.001] (EE) Wacom Bamboo 2FG 4x5 Pen stylus: Invalid type 'touch' for this device.
[ 6507.001] (EE) Wacom Bamboo 2FG 4x5 Pen stylus: Invalid type 'pad' for this device.
[ 6507.001] (II) Wacom Bamboo 2FG 4x5 Pen stylus: hotplugging completed.
[ 6507.112] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input12/event12"
[ 6507.112] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Pen stylus" (type: STYLUS, id 12)
[ 6507.112] (II) XKB: Reusing cached keymap
[ 6507.113] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) keeping acceleration scheme 1
[ 6507.113] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) acceleration profile 0
[ 6507.113] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) acceleration factor: 2.000
[ 6507.113] (**) Wacom Bamboo 2FG 4x5 Pen stylus: (accel) acceleration threshold: 4
[ 6507.113] (**) Option "Device" "/dev/input/event12"
[ 6507.113] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "evdev tablet catchall"
[ 6507.113] (**) Wacom Bamboo 2FG 4x5 Pen eraser: Applying InputClass "Wacom class"
[ 6507.113] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Pen eraser'
[ 6507.113] Option "StopBits" "1"
[ 6507.113] Option "DataBits" "8"
[ 6507.113] Option "Parity" "None"
[ 6507.113] Option "Vmin" "1"
[ 6507.113] Option "Vtime" "10"
[ 6507.113] Option "FlowControl" "Xoff"
[ 6507.113] Option "_source" "_driver/wacom"
[ 6507.113] Option "Name" "Wacom Bamboo 2FG 4x5 Pen eraser"
[ 6507.113] Option "path" "/dev/input/event12"
[ 6507.113] Option "device" "/dev/input/event12"
[ 6507.113] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input12/event12"
[ 6507.113] Option "driver" "wacom"
[ 6507.113] Option "Type" "eraser"
[ 6507.113] (**) Wacom Bamboo 2FG 4x5 Pen eraser: always reports core events
[ 6507.113] (**) Option "Device" "/dev/input/event12"
[ 6507.113] (**) Option "Type" "eraser"
[ 6507.113] (**) Option "Device" "/dev/input/event12"
[ 6507.113] (--) Wacom Bamboo 2FG 4x5 Pen eraser: Wacom USB Bamboo tablet maxX=14720 maxY=9200 maxZ=1023 resX=100000 resY=100000 tilt=disabled
[ 6507.166] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input12/event12"
[ 6507.166] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Pen eraser" (type: ERASER, id 13)
[ 6507.166] (II) XKB: Reusing cached keymap
[ 6507.166] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) keeping acceleration scheme 1
[ 6507.166] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) acceleration profile 0
[ 6507.166] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) acceleration factor: 2.000
[ 6507.166] (**) Wacom Bamboo 2FG 4x5 Pen eraser: (accel) acceleration threshold: 4
[ 6507.166] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Pen (/dev/input/mouse1)
[ 6507.166] (II) No input driver specified, ignoring this device.
[ 6507.166] (II) This device may have been added with another device file.
[ 6507.167] (II) config/udev: Adding input device Wacom Bamboo 2FG 4x5 Finger (/dev/input/event13)
[ 6507.167] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "evdev touchpad catchall"
[ 6507.167] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "touchpad catchall"
[ 6507.167] (**) Wacom Bamboo 2FG 4x5 Finger: Applying InputClass "Wacom class"
[ 6507.167] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Finger'
[ 6507.167] Option "StopBits" "1"
[ 6507.167] Option "DataBits" "8"
[ 6507.167] Option "Parity" "None"
[ 6507.167] Option "Vmin" "1"
[ 6507.167] Option "Vtime" "10"
[ 6507.167] Option "FlowControl" "Xoff"
[ 6507.167] Option "_source" "server/udev"
[ 6507.167] Option "name" "Wacom Bamboo 2FG 4x5 Finger"
[ 6507.167] Option "path" "/dev/input/event13"
[ 6507.167] Option "device" "/dev/input/event13"
[ 6507.167] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input13/event13"
[ 6507.167] Option "driver" "wacom"
[ 6507.167] Option "TapButton1" "1"
[ 6507.167] Option "TapButton2" "2"
[ 6507.167] Option "TapButton3" "3"
[ 6507.167] (**) Wacom Bamboo 2FG 4x5 Finger: always reports core events
[ 6507.167] (**) Option "Device" "/dev/input/event13"
[ 6507.167] (**) Option "Device" "/dev/input/event13"
[ 6507.167] (EE) Wacom Bamboo 2FG 4x5 Finger: Invalid type 'stylus' for this device.
[ 6507.167] (EE) Wacom Bamboo 2FG 4x5 Finger: Invalid type 'eraser' for this device.
[ 6507.167] (EE) Wacom Bamboo 2FG 4x5 Finger: Invalid type 'cursor' for this device.
[ 6507.167] (II) Wacom Bamboo 2FG 4x5 Finger: type not specified, assuming 'touch'.
[ 6507.167] (II) Wacom Bamboo 2FG 4x5 Finger: other types will be automatically added.
[ 6507.167] (--) Wacom Bamboo 2FG 4x5 Finger touch: using pressure threshold of 27 for button 1
[ 6507.167] (--) Wacom Bamboo 2FG 4x5 Finger touch: Wacom USB Bamboo tablet maxX=15360 maxY=10240 maxZ=0 resX=128000 resY=128000
[ 6507.167] (II) Wacom Bamboo 2FG 4x5 Finger touch: hotplugging dependent devices.
[ 6507.167] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'stylus' for this device.
[ 6507.167] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'eraser' for this device.
[ 6507.167] (EE) Wacom Bamboo 2FG 4x5 Finger touch: Invalid type 'cursor' for this device.
[ 6507.167] (II) Wacom Bamboo 2FG 4x5 Finger touch: hotplugging completed.
[ 6507.272] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input13/event13"
[ 6507.272] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Finger touch" (type: TOUCH, id 14)
[ 6507.272] (II) XKB: Reusing cached keymap
[ 6507.273] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) keeping acceleration scheme 1
[ 6507.273] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) acceleration profile 0
[ 6507.273] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) acceleration factor: 2.000
[ 6507.273] (**) Wacom Bamboo 2FG 4x5 Finger touch: (accel) acceleration threshold: 4
[ 6507.273] (**) Option "Device" "/dev/input/event13"
[ 6507.273] (**) Wacom Bamboo 2FG 4x5 Finger pad: Applying InputClass "evdev touchpad catchall"
[ 6507.273] (**) Wacom Bamboo 2FG 4x5 Finger pad: Applying InputClass "touchpad catchall"
[ 6507.273] (**) Wacom Bamboo 2FG 4x5 Finger pad: Applying InputClass "Wacom class"
[ 6507.273] (II) Using input driver 'wacom' for 'Wacom Bamboo 2FG 4x5 Finger pad'
[ 6507.273] Option "StopBits" "1"
[ 6507.273] Option "DataBits" "8"
[ 6507.273] Option "Parity" "None"
[ 6507.273] Option "Vmin" "1"
[ 6507.273] Option "Vtime" "10"
[ 6507.273] Option "FlowControl" "Xoff"
[ 6507.273] Option "_source" "_driver/wacom"
[ 6507.273] Option "Name" "Wacom Bamboo 2FG 4x5 Finger pad"
[ 6507.273] Option "path" "/dev/input/event13"
[ 6507.273] Option "device" "/dev/input/event13"
[ 6507.273] Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input13/event13"
[ 6507.273] Option "driver" "wacom"
[ 6507.273] Option "TapButton1" "1"
[ 6507.273] Option "TapButton2" "2"
[ 6507.273] Option "TapButton3" "3"
[ 6507.273] Option "Type" "pad"
[ 6507.273] (**) Wacom Bamboo 2FG 4x5 Finger pad: always reports core events
[ 6507.273] (**) Option "Device" "/dev/input/event13"
[ 6507.273] (**) Option "Type" "pad"
[ 6507.273] (**) Option "Device" "/dev/input/event13"
[ 6507.273] (--) Wacom Bamboo 2FG 4x5 Finger pad: Wacom USB Bamboo tablet maxX=15360 maxY=10240 maxZ=0 resX=128000 resY=128000
[ 6507.326] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input13/event13"
[ 6507.326] (II) XINPUT: Adding extended input device "Wacom Bamboo 2FG 4x5 Finger pad" (type: PAD, id 15)
[ 6507.326] (II) XKB: Reusing cached keymap
[ 6507.326] (**) Wacom Bamboo 2FG 4x5 Finger pad: (accel) keeping acceleration scheme 1
[ 6507.326] (**) Wacom Bamboo 2FG 4x5 Finger pad: (accel) acceleration profile 0
[ 6507.326] (**) Wacom Bamboo 2FG 4x5 Finger pad: (accel) acceleration factor: 2.000
[ 6507.326] (**) Wacom Bamboo 2FG 4x5 Finger pad: (accel) acceleration threshold: 4Offline
#7 2012-02-13 20:51:15
- .:B:.
- Forum Fellow
- Registered: 2006-11-26
- Posts: 5,819
- Website
Re: Xorg 1.12 : no problem so far :)
Predictably (and horribly) broken with catalys 12.1, alas.
Got Leenucks? :: Arch: Power in simplicity :: Get Counted! Registered Linux User #392717 :: Blog thingy
Offline
#8 2012-02-20 12:48:14
- fredbezies
- Member
- Registered: 2011-07-28
- Posts: 357
Re: Xorg 1.12 : no problem so far :)
So is nvidia driver with some cards / chipset. Had to switch to nouveau on my desktop computer.
Offline
#9 2012-02-20 13:08:28
- Gusar
- Member
- Registered: 2009-08-25
- Posts: 3,605
Re: Xorg 1.12 : no problem so far :)
fredbezies wrote:
So is nvidia driver with some cards / chipset.
Which ones? You're the first one reporting issues. Works fine here with two quite different cards - Geforce Go 6600 and Geforce GTS450
Last edited by Gusar (2012-02-20 13:11:32)
Offline
#10 2012-02-20 14:21:27
- fredbezies
- Member
- Registered: 2011-07-28
- Posts: 357
Re: Xorg 1.12 : no problem so far :)
Gusar wrote:
fredbezies wrote:So is nvidia driver with some cards / chipset.
Which ones? You're the first one reporting issues. Works fine here with two quite different cards - Geforce Go 6600 and Geforce GTS450
Not the first one.
Working : GeForce 7000M on my laptop.
Crashing : GeForce GT 210 on my desktop.
Crash is known : see https://bugs.archlinux.org/task/28441
Offline
#11 2012-02-20 14:27:35
- Gusar
- Member
- Registered: 2009-08-25
- Posts: 3,605
Re: Xorg 1.12 : no problem so far :)
Oh, that. That's not X related, it's a nvidia driver bug, regardless of X version.
Offline
#12 2012-02-20 22:28:40
- sbillaudelle
- Member
- Registered: 2011-10-03
- Posts: 7
Re: Xorg 1.12 : no problem so far :)
I'm having a ThinkPad T400 here with a Synaptics touchpad and a TrackPoint. With the upgrade some weird behaviour got introduced:
When I
scroll using my touchpad
use the trackpoint (move the cursor or press one of the TrackPoint's buttons)
and then scroll using the touchpad again
the content (e.g. webpage, text editor, …) starts scrolling from the top.
I confirmed this issue at a friend's with a different ThinkPad model.
Offline
#13 2012-02-21 19:57:55
- Paul-S
- Member
- From: Wales
- Registered: 2008-02-04
- Posts: 353
Re: Xorg 1.12 : no problem so far :)
Updated to xf86-input-synaptics 1.5.99-0.2 today and it cured my coasting problem.
Cheers
Paul-S
Offline
#14 2012-02-22 16:06:50
- Gilgad13
- Member
- Registered: 2009-04-08
- Posts: 3
Re: Xorg 1.12 : no problem so far :)
I'm currently seeing segfaults with the xf86-video-vmware driver and the Xorg from [testing].
Xorg.log:
[ 7.586]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 7.586]
X.Org X Server 1.11.99.903 (1.12.0 RC 3)
Release Date: 2012-02-11
[ 7.586] X Protocol Version 11, Revision 0
[ 7.586] Build Operating System: Linux 3.2.6-2-ARCH x86_64
[ 7.586] Current Operating System: Linux archlinux-vm 3.2.7-1-ARCH #1 SMP PREEMPT Tue Feb 21 09:51:29 CET 2012 x86_64
[ 7.586] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/454f4ba0-a50d-418f-9dca-1d57dc9e788e ro init=/bin/systemd quiet
[ 7.586] Build Date: 18 February 2012 05:06:59PM
[ 7.586]
[ 7.586] Current version of pixman: 0.24.4
[ 7.586] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.586] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.586] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 22 06:43:11 2012
[ 7.602] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 7.602] (==) No Layout section. Using the first Screen section.
[ 7.602] (==) No screen section available. Using defaults.
[ 7.602] (**) |-->Screen "Default Screen Section" (0)
[ 7.602] (**) | |-->Monitor "<default monitor>"
[ 7.602] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.602] (==) Automatically adding devices
[ 7.602] (==) Automatically enabling devices
[ 7.619] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 7.619] Entry deleted from font path.
[ 7.619] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 7.619] Entry deleted from font path.
[ 7.620] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 7.620] Entry deleted from font path.
[ 7.620] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 7.620] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 7.620] Entry deleted from font path.
[ 7.620] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 7.620] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 7.620] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.620] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.620] (II) Loader magic: 0x7cf1e0
[ 7.620] (II) Module ABI versions:
[ 7.620] X.Org ANSI C Emulation: 0.4
[ 7.620] X.Org Video Driver: 12.0
[ 7.620] X.Org XInput driver : 16.0
[ 7.620] X.Org Server Extension : 6.0
[ 7.647] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xd0000000/134217728, 0xd8000000/8388608, I/O @ 0x000010d0/16, BIOS @ 0x????????/32768
[ 7.647] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 7.648] (II) LoadModule: "extmod"
[ 7.680] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 7.723] (II) Module extmod: vendor="X.Org Foundation"
[ 7.723] compiled for 1.11.99.903, module version = 1.0.0
[ 7.723] Module class: X.Org Server Extension
[ 7.723] ABI class: X.Org Server Extension, version 6.0
[ 7.723] (II) Loading extension MIT-SCREEN-SAVER
[ 7.723] (II) Loading extension XFree86-VidModeExtension
[ 7.723] (II) Loading extension XFree86-DGA
[ 7.723] (II) Loading extension DPMS
[ 7.723] (II) Loading extension XVideo
[ 7.723] (II) Loading extension XVideo-MotionCompensation
[ 7.723] (II) Loading extension X-Resource
[ 7.723] (II) LoadModule: "dbe"
[ 7.724] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 7.730] (II) Module dbe: vendor="X.Org Foundation"
[ 7.730] compiled for 1.11.99.903, module version = 1.0.0
[ 7.730] Module class: X.Org Server Extension
[ 7.730] ABI class: X.Org Server Extension, version 6.0
[ 7.730] (II) Loading extension DOUBLE-BUFFER
[ 7.730] (II) LoadModule: "glx"
[ 7.730] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.764] (II) Module glx: vendor="X.Org Foundation"
[ 7.764] compiled for 1.11.99.903, module version = 1.0.0
[ 7.764] ABI class: X.Org Server Extension, version 6.0
[ 7.764] (==) AIGLX enabled
[ 7.764] (II) Loading extension GLX
[ 7.764] (II) LoadModule: "record"
[ 7.764] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 7.768] (II) Module record: vendor="X.Org Foundation"
[ 7.768] compiled for 1.11.99.903, module version = 1.13.0
[ 7.768] Module class: X.Org Server Extension
[ 7.768] ABI class: X.Org Server Extension, version 6.0
[ 7.768] (II) Loading extension RECORD
[ 7.768] (II) LoadModule: "dri"
[ 7.768] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 7.785] (II) Module dri: vendor="X.Org Foundation"
[ 7.785] compiled for 1.11.99.903, module version = 1.0.0
[ 7.785] ABI class: X.Org Server Extension, version 6.0
[ 7.785] (II) Loading extension XFree86-DRI
[ 7.785] (II) LoadModule: "dri2"
[ 7.785] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 7.787] (II) Module dri2: vendor="X.Org Foundation"
[ 7.787] compiled for 1.11.99.903, module version = 1.2.0
[ 7.787] ABI class: X.Org Server Extension, version 6.0
[ 7.787] (II) Loading extension DRI2
[ 7.787] (==) Matched vmware as autoconfigured driver 0
[ 7.787] (==) Matched vesa as autoconfigured driver 1
[ 7.787] (==) Matched fbdev as autoconfigured driver 2
[ 7.787] (==) Assigned the driver to the xf86ConfigLayout
[ 7.787] (II) LoadModule: "vmware"
[ 7.789] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 7.794] (II) Module vmware: vendor="X.Org Foundation"
[ 7.794] compiled for 1.11.99.903, module version = 11.99.901
[ 7.795] Module class: X.Org Video Driver
[ 7.795] ABI class: X.Org Video Driver, version 12.0
[ 7.795] (II) LoadModule: "vesa"
[ 7.795] (WW) Warning, couldn't open module vesa
[ 7.795] (II) UnloadModule: "vesa"
[ 7.795] (II) Unloading vesa
[ 7.795] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 7.795] (II) LoadModule: "fbdev"
[ 7.795] (WW) Warning, couldn't open module fbdev
[ 7.795] (II) UnloadModule: "fbdev"
[ 7.795] (II) Unloading fbdev
[ 7.795] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 7.795] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[ 7.795] (++) using VT number 7
[ 7.797] (II) vmware(0): Driver was compiled without KMS- and 3D support.
[ 7.797] (WW) vmware(0): Disabling 3D support.
[ 7.797] (WW) vmware(0): Disabling Render Acceleration.
[ 7.797] (WW) vmware(0): Disabling RandR12+ support.
[ 7.797] (--) vmware(0): VMware SVGA regs at (0x10d0, 0x10d1)
[ 7.797] (II) Loading sub module "vgahw"
[ 7.797] (II) LoadModule: "vgahw"
[ 7.797] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 7.802] (II) Module vgahw: vendor="X.Org Foundation"
[ 7.802] compiled for 1.11.99.903, module version = 0.1.0
[ 7.802] ABI class: X.Org Video Driver, version 12.0
[ 7.802]
[ 7.802] Backtrace:
[ 7.802] 0: /usr/bin/X (xorg_backtrace+0x34) [0x567e44]
[ 7.802] 1: /usr/bin/X (0x400000+0x16b959) [0x56b959]
[ 7.802] 2: /lib/libpthread.so.0 (0x7f57a34b6000+0xf270) [0x7f57a34c5270]
[ 7.802]
[ 7.802] Segmentation fault at address (nil)
[ 7.802]
Fatal server error:
[ 7.802] Caught signal 11 (Segmentation fault). Server aborting
[ 7.802]
[ 7.802]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 7.802] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 7.802]
[ 7.805] Server terminated with error (1). Closing log file.vmware driver version:
$ pacman -Qi xf86-video-vmware
Name : xf86-video-vmware
Version : 11.99.901-1
URL : http://xorg.freedesktop.org/
Licenses : custom
Groups : xorg-drivers xorg
Provides : None
Depends On : libdrm
Optional Deps : None
Required By : None
Conflicts With : xorg-server<1.11.99.903
Replaces : None
Installed Size : 64.00 KiB
Packager : Andreas Radke <andyrtr@archlinux.org>
Architecture : x86_64
Build Date : Sat 11 Feb 2012 07:15:20 AM EST
Install Date : Wed 22 Feb 2012 06:39:39 AM EST
Install Reason : Explicitly installed
Install Script : No
Description : X.org vmware video driverI'm using systemd, if that matters. I guess I haven't technically nailed it down to the vmware driver, but that is the one feature of this setup that would differ from others.
:wq
Offline
#15 2012-02-29 22:10:51
- RomaHagen
- Member
- Registered: 2011-09-21
- Posts: 14
Re: Xorg 1.12 : no problem so far :)
No problems here with intel graphics adapter.
Offline
#16 2012-03-12 15:49:01
- Cdh
- Member
- Registered: 2009-02-03
- Posts: 1,098
Re: Xorg 1.12 : no problem so far :)
Works mostly fine for me too, mesa git and radeon.
One problem is that in wine games the mouse is very jumpy again, makes skyrim unplayable, warcraft is visibly affected, but doesn't affect gameplay. I have not tested much with downgrading, so maybe people can just tell whether their games still work well in wine?
Not sure if it's wine's fault or new xorg/evdev driver/?? (synaptics touchpad also has the problem. Not sure what's going on, but could be related)...
฿ 18PRsqbZCrwPUrVnJe1BZvza7bwSDbpxZz
Offline
#17 2012-03-13 04:14:11
- Jessehk
- Member
- From: Toronto, Ontario, Canada
- Registered: 2007-01-16
- Posts: 152
Re: Xorg 1.12 : no problem so far :)
Gilgad13 wrote:
I'm currently seeing segfaults with the xf86-video-vmware driver and the Xorg from [testing].
Xorg.log:
[ 7.586] This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. [ 7.586] X.Org X Server 1.11.99.903 (1.12.0 RC 3) Release Date: 2012-02-11 [ 7.586] X Protocol Version 11, Revision 0 [ 7.586] Build Operating System: Linux 3.2.6-2-ARCH x86_64 [ 7.586] Current Operating System: Linux archlinux-vm 3.2.7-1-ARCH #1 SMP PREEMPT Tue Feb 21 09:51:29 CET 2012 x86_64 [ 7.586] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/454f4ba0-a50d-418f-9dca-1d57dc9e788e ro init=/bin/systemd quiet [ 7.586] Build Date: 18 February 2012 05:06:59PM [ 7.586] [ 7.586] Current version of pixman: 0.24.4 [ 7.586] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 7.586] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 7.586] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 22 06:43:11 2012 [ 7.602] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 7.602] (==) No Layout section. Using the first Screen section. [ 7.602] (==) No screen section available. Using defaults. [ 7.602] (**) |-->Screen "Default Screen Section" (0) [ 7.602] (**) | |-->Monitor "<default monitor>" [ 7.602] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 7.602] (==) Automatically adding devices [ 7.602] (==) Automatically enabling devices [ 7.619] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 7.619] Entry deleted from font path. [ 7.619] (WW) The directory "/usr/share/fonts/Type1/" does not exist. [ 7.619] Entry deleted from font path. [ 7.620] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 7.620] Entry deleted from font path. [ 7.620] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 7.620] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 7.620] Entry deleted from font path. [ 7.620] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 7.620] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/ [ 7.620] (==) ModulePath set to "/usr/lib/xorg/modules" [ 7.620] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 7.620] (II) Loader magic: 0x7cf1e0 [ 7.620] (II) Module ABI versions: [ 7.620] X.Org ANSI C Emulation: 0.4 [ 7.620] X.Org Video Driver: 12.0 [ 7.620] X.Org XInput driver : 16.0 [ 7.620] X.Org Server Extension : 6.0 [ 7.647] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xd0000000/134217728, 0xd8000000/8388608, I/O @ 0x000010d0/16, BIOS @ 0x????????/32768 [ 7.647] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 7.648] (II) LoadModule: "extmod" [ 7.680] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 7.723] (II) Module extmod: vendor="X.Org Foundation" [ 7.723] compiled for 1.11.99.903, module version = 1.0.0 [ 7.723] Module class: X.Org Server Extension [ 7.723] ABI class: X.Org Server Extension, version 6.0 [ 7.723] (II) Loading extension MIT-SCREEN-SAVER [ 7.723] (II) Loading extension XFree86-VidModeExtension [ 7.723] (II) Loading extension XFree86-DGA [ 7.723] (II) Loading extension DPMS [ 7.723] (II) Loading extension XVideo [ 7.723] (II) Loading extension XVideo-MotionCompensation [ 7.723] (II) Loading extension X-Resource [ 7.723] (II) LoadModule: "dbe" [ 7.724] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 7.730] (II) Module dbe: vendor="X.Org Foundation" [ 7.730] compiled for 1.11.99.903, module version = 1.0.0 [ 7.730] Module class: X.Org Server Extension [ 7.730] ABI class: X.Org Server Extension, version 6.0 [ 7.730] (II) Loading extension DOUBLE-BUFFER [ 7.730] (II) LoadModule: "glx" [ 7.730] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 7.764] (II) Module glx: vendor="X.Org Foundation" [ 7.764] compiled for 1.11.99.903, module version = 1.0.0 [ 7.764] ABI class: X.Org Server Extension, version 6.0 [ 7.764] (==) AIGLX enabled [ 7.764] (II) Loading extension GLX [ 7.764] (II) LoadModule: "record" [ 7.764] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 7.768] (II) Module record: vendor="X.Org Foundation" [ 7.768] compiled for 1.11.99.903, module version = 1.13.0 [ 7.768] Module class: X.Org Server Extension [ 7.768] ABI class: X.Org Server Extension, version 6.0 [ 7.768] (II) Loading extension RECORD [ 7.768] (II) LoadModule: "dri" [ 7.768] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 7.785] (II) Module dri: vendor="X.Org Foundation" [ 7.785] compiled for 1.11.99.903, module version = 1.0.0 [ 7.785] ABI class: X.Org Server Extension, version 6.0 [ 7.785] (II) Loading extension XFree86-DRI [ 7.785] (II) LoadModule: "dri2" [ 7.785] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 7.787] (II) Module dri2: vendor="X.Org Foundation" [ 7.787] compiled for 1.11.99.903, module version = 1.2.0 [ 7.787] ABI class: X.Org Server Extension, version 6.0 [ 7.787] (II) Loading extension DRI2 [ 7.787] (==) Matched vmware as autoconfigured driver 0 [ 7.787] (==) Matched vesa as autoconfigured driver 1 [ 7.787] (==) Matched fbdev as autoconfigured driver 2 [ 7.787] (==) Assigned the driver to the xf86ConfigLayout [ 7.787] (II) LoadModule: "vmware" [ 7.789] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so [ 7.794] (II) Module vmware: vendor="X.Org Foundation" [ 7.794] compiled for 1.11.99.903, module version = 11.99.901 [ 7.795] Module class: X.Org Video Driver [ 7.795] ABI class: X.Org Video Driver, version 12.0 [ 7.795] (II) LoadModule: "vesa" [ 7.795] (WW) Warning, couldn't open module vesa [ 7.795] (II) UnloadModule: "vesa" [ 7.795] (II) Unloading vesa [ 7.795] (EE) Failed to load module "vesa" (module does not exist, 0) [ 7.795] (II) LoadModule: "fbdev" [ 7.795] (WW) Warning, couldn't open module fbdev [ 7.795] (II) UnloadModule: "fbdev" [ 7.795] (II) Unloading fbdev [ 7.795] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 7.795] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710 [ 7.795] (++) using VT number 7 [ 7.797] (II) vmware(0): Driver was compiled without KMS- and 3D support. [ 7.797] (WW) vmware(0): Disabling 3D support. [ 7.797] (WW) vmware(0): Disabling Render Acceleration. [ 7.797] (WW) vmware(0): Disabling RandR12+ support. [ 7.797] (--) vmware(0): VMware SVGA regs at (0x10d0, 0x10d1) [ 7.797] (II) Loading sub module "vgahw" [ 7.797] (II) LoadModule: "vgahw" [ 7.797] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 7.802] (II) Module vgahw: vendor="X.Org Foundation" [ 7.802] compiled for 1.11.99.903, module version = 0.1.0 [ 7.802] ABI class: X.Org Video Driver, version 12.0 [ 7.802] [ 7.802] Backtrace: [ 7.802] 0: /usr/bin/X (xorg_backtrace+0x34) [0x567e44] [ 7.802] 1: /usr/bin/X (0x400000+0x16b959) [0x56b959] [ 7.802] 2: /lib/libpthread.so.0 (0x7f57a34b6000+0xf270) [0x7f57a34c5270] [ 7.802] [ 7.802] Segmentation fault at address (nil) [ 7.802] Fatal server error: [ 7.802] Caught signal 11 (Segmentation fault). Server aborting [ 7.802] [ 7.802] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 7.802] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 7.802] [ 7.805] Server terminated with error (1). Closing log file.vmware driver version:
$ pacman -Qi xf86-video-vmware Name : xf86-video-vmware Version : 11.99.901-1 URL : http://xorg.freedesktop.org/ Licenses : custom Groups : xorg-drivers xorg Provides : None Depends On : libdrm Optional Deps : None Required By : None Conflicts With : xorg-server<1.11.99.903 Replaces : None Installed Size : 64.00 KiB Packager : Andreas Radke <andyrtr@archlinux.org> Architecture : x86_64 Build Date : Sat 11 Feb 2012 07:15:20 AM EST Install Date : Wed 22 Feb 2012 06:39:39 AM EST Install Reason : Explicitly installed Install Script : No Description : X.org vmware video driverI'm using systemd, if that matters. I guess I haven't technically nailed it down to the vmware driver, but that is the one feature of this setup that would differ from others.
Same here, except now it has been moved to [extra]. Note good. 
Bug is here: https://bugs.archlinux.org/task/28882
Offline
#18 2012-03-13 04:44:46
- triplesquarednine
- Member
- Registered: 2011-04-12
- Posts: 630
Re: Xorg 1.12 : no problem so far :)
Xorg 1.12 is working fairly well here (just upgraded a while ago).
However, one small annoyance/bug(?) is that my wacom seems to scroll (downwards) really fast, but only when i first scroll. after this, scrolling behavior is normal in both directions.
But on my system it could be caused by a few different things, as i gesture recognition software with scrolling emulation. So i will have to investigate it more, before i know what the cause is.
Offline
#19 2012-03-13 08:44:35
- yvonney
- Member
- Registered: 2008-06-11
- Posts: 671
Re: Xorg 1.12 : no problem so far :)
Jessehk wrote:
Gilgad13 wrote:I'm currently seeing segfaults with the xf86-video-vmware driver and the Xorg from [testing].
Xorg.log:
[ 7.586] This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. [ 7.586] X.Org X Server 1.11.99.903 (1.12.0 RC 3) Release Date: 2012-02-11 [ 7.586] X Protocol Version 11, Revision 0 [ 7.586] Build Operating System: Linux 3.2.6-2-ARCH x86_64 [ 7.586] Current Operating System: Linux archlinux-vm 3.2.7-1-ARCH #1 SMP PREEMPT Tue Feb 21 09:51:29 CET 2012 x86_64 [ 7.586] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/454f4ba0-a50d-418f-9dca-1d57dc9e788e ro init=/bin/systemd quiet [ 7.586] Build Date: 18 February 2012 05:06:59PM [ 7.586] [ 7.586] Current version of pixman: 0.24.4 [ 7.586] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 7.586] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 7.586] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 22 06:43:11 2012 [ 7.602] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 7.602] (==) No Layout section. Using the first Screen section. [ 7.602] (==) No screen section available. Using defaults. [ 7.602] (**) |-->Screen "Default Screen Section" (0) [ 7.602] (**) | |-->Monitor "<default monitor>" [ 7.602] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 7.602] (==) Automatically adding devices [ 7.602] (==) Automatically enabling devices [ 7.619] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 7.619] Entry deleted from font path. [ 7.619] (WW) The directory "/usr/share/fonts/Type1/" does not exist. [ 7.619] Entry deleted from font path. [ 7.620] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 7.620] Entry deleted from font path. [ 7.620] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 7.620] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 7.620] Entry deleted from font path. [ 7.620] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 7.620] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/ [ 7.620] (==) ModulePath set to "/usr/lib/xorg/modules" [ 7.620] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 7.620] (II) Loader magic: 0x7cf1e0 [ 7.620] (II) Module ABI versions: [ 7.620] X.Org ANSI C Emulation: 0.4 [ 7.620] X.Org Video Driver: 12.0 [ 7.620] X.Org XInput driver : 16.0 [ 7.620] X.Org Server Extension : 6.0 [ 7.647] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xd0000000/134217728, 0xd8000000/8388608, I/O @ 0x000010d0/16, BIOS @ 0x????????/32768 [ 7.647] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 7.648] (II) LoadModule: "extmod" [ 7.680] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 7.723] (II) Module extmod: vendor="X.Org Foundation" [ 7.723] compiled for 1.11.99.903, module version = 1.0.0 [ 7.723] Module class: X.Org Server Extension [ 7.723] ABI class: X.Org Server Extension, version 6.0 [ 7.723] (II) Loading extension MIT-SCREEN-SAVER [ 7.723] (II) Loading extension XFree86-VidModeExtension [ 7.723] (II) Loading extension XFree86-DGA [ 7.723] (II) Loading extension DPMS [ 7.723] (II) Loading extension XVideo [ 7.723] (II) Loading extension XVideo-MotionCompensation [ 7.723] (II) Loading extension X-Resource [ 7.723] (II) LoadModule: "dbe" [ 7.724] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 7.730] (II) Module dbe: vendor="X.Org Foundation" [ 7.730] compiled for 1.11.99.903, module version = 1.0.0 [ 7.730] Module class: X.Org Server Extension [ 7.730] ABI class: X.Org Server Extension, version 6.0 [ 7.730] (II) Loading extension DOUBLE-BUFFER [ 7.730] (II) LoadModule: "glx" [ 7.730] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 7.764] (II) Module glx: vendor="X.Org Foundation" [ 7.764] compiled for 1.11.99.903, module version = 1.0.0 [ 7.764] ABI class: X.Org Server Extension, version 6.0 [ 7.764] (==) AIGLX enabled [ 7.764] (II) Loading extension GLX [ 7.764] (II) LoadModule: "record" [ 7.764] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 7.768] (II) Module record: vendor="X.Org Foundation" [ 7.768] compiled for 1.11.99.903, module version = 1.13.0 [ 7.768] Module class: X.Org Server Extension [ 7.768] ABI class: X.Org Server Extension, version 6.0 [ 7.768] (II) Loading extension RECORD [ 7.768] (II) LoadModule: "dri" [ 7.768] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 7.785] (II) Module dri: vendor="X.Org Foundation" [ 7.785] compiled for 1.11.99.903, module version = 1.0.0 [ 7.785] ABI class: X.Org Server Extension, version 6.0 [ 7.785] (II) Loading extension XFree86-DRI [ 7.785] (II) LoadModule: "dri2" [ 7.785] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 7.787] (II) Module dri2: vendor="X.Org Foundation" [ 7.787] compiled for 1.11.99.903, module version = 1.2.0 [ 7.787] ABI class: X.Org Server Extension, version 6.0 [ 7.787] (II) Loading extension DRI2 [ 7.787] (==) Matched vmware as autoconfigured driver 0 [ 7.787] (==) Matched vesa as autoconfigured driver 1 [ 7.787] (==) Matched fbdev as autoconfigured driver 2 [ 7.787] (==) Assigned the driver to the xf86ConfigLayout [ 7.787] (II) LoadModule: "vmware" [ 7.789] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so [ 7.794] (II) Module vmware: vendor="X.Org Foundation" [ 7.794] compiled for 1.11.99.903, module version = 11.99.901 [ 7.795] Module class: X.Org Video Driver [ 7.795] ABI class: X.Org Video Driver, version 12.0 [ 7.795] (II) LoadModule: "vesa" [ 7.795] (WW) Warning, couldn't open module vesa [ 7.795] (II) UnloadModule: "vesa" [ 7.795] (II) Unloading vesa [ 7.795] (EE) Failed to load module "vesa" (module does not exist, 0) [ 7.795] (II) LoadModule: "fbdev" [ 7.795] (WW) Warning, couldn't open module fbdev [ 7.795] (II) UnloadModule: "fbdev" [ 7.795] (II) Unloading fbdev [ 7.795] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 7.795] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710 [ 7.795] (++) using VT number 7 [ 7.797] (II) vmware(0): Driver was compiled without KMS- and 3D support. [ 7.797] (WW) vmware(0): Disabling 3D support. [ 7.797] (WW) vmware(0): Disabling Render Acceleration. [ 7.797] (WW) vmware(0): Disabling RandR12+ support. [ 7.797] (--) vmware(0): VMware SVGA regs at (0x10d0, 0x10d1) [ 7.797] (II) Loading sub module "vgahw" [ 7.797] (II) LoadModule: "vgahw" [ 7.797] (II) Loading /usr/lib/xorg/modules/libvgahw.so [ 7.802] (II) Module vgahw: vendor="X.Org Foundation" [ 7.802] compiled for 1.11.99.903, module version = 0.1.0 [ 7.802] ABI class: X.Org Video Driver, version 12.0 [ 7.802] [ 7.802] Backtrace: [ 7.802] 0: /usr/bin/X (xorg_backtrace+0x34) [0x567e44] [ 7.802] 1: /usr/bin/X (0x400000+0x16b959) [0x56b959] [ 7.802] 2: /lib/libpthread.so.0 (0x7f57a34b6000+0xf270) [0x7f57a34c5270] [ 7.802] [ 7.802] Segmentation fault at address (nil) [ 7.802] Fatal server error: [ 7.802] Caught signal 11 (Segmentation fault). Server aborting [ 7.802] [ 7.802] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 7.802] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 7.802] [ 7.805] Server terminated with error (1). Closing log file.vmware driver version:
$ pacman -Qi xf86-video-vmware Name : xf86-video-vmware Version : 11.99.901-1 URL : http://xorg.freedesktop.org/ Licenses : custom Groups : xorg-drivers xorg Provides : None Depends On : libdrm Optional Deps : None Required By : None Conflicts With : xorg-server<1.11.99.903 Replaces : None Installed Size : 64.00 KiB Packager : Andreas Radke <andyrtr@archlinux.org> Architecture : x86_64 Build Date : Sat 11 Feb 2012 07:15:20 AM EST Install Date : Wed 22 Feb 2012 06:39:39 AM EST Install Reason : Explicitly installed Install Script : No Description : X.org vmware video driverI'm using systemd, if that matters. I guess I haven't technically nailed it down to the vmware driver, but that is the one feature of this setup that would differ from others.
Same here, except now it has been moved to [extra]. Note good.
HAVE downgrade and hoping for solution. THANK YOU.
Last edited by yvonney (2012-03-13 09:04:51)
Offline
#20 2012-03-13 09:25:48
- PierreR
- Member
- Registered: 2008-11-10
- Posts: 58
Re: Xorg 1.12 : no problem so far :)
I have the "segfaults with the xf86-video-vmware driver" problem as well but with the latest [extra] Xorg package ....
Unfortunately there are no downgrade packages for Xorg in /var/cache/pacman for some mysterious reason (I did a pacman -Scc but this was a couple days before upgrade)
Would it help to rebuild xf86-video-vmware from ABS ?
Shall I create a new thread as the fault occurs in [extra] now ?
Thanks for your help.
Offline
#21 2012-03-13 10:10:37
- Roken
- Member
- From: South Wales, UK
- Registered: 2012-01-16
- Posts: 1,281
Re: Xorg 1.12 : no problem so far :)
.:B:. wrote:
Predictably (and horribly) broken with catalys 12.1, alas.
Has anyone tested with catalyst 12.2 yet? I've been holding back the xorg updates deliberately.
Ryzen 5900X 12 core/24 thread - RTX 3090 FE 24 Gb, Asus Prime B450 Plus, 32Gb Corsair DDR4, Cooler Master N300 chassis, 5 HD (1 NvME PCI, 4SSD) + 1 x optical.
Linux user #545703
/ is the root of all problems.
Offline
#22 2012-03-13 11:03:38
- yvonney
- Member
- Registered: 2008-06-11
- Posts: 671
Re: Xorg 1.12 : no problem so far :)
I'e gotten good enough at rebuilding open-vm-tools open-vm-modules, that didn't allow me to start X. I didn't think to manually rebuild xf86-video-vmware. dunno. though downgrading worked. had to uninstall a few packages in order from initial login term and it was all a bit haphazrd on my part though worked. then reinstalled xf86-video-vmware and vesa and put open-vm-tools back in the DAEMONS line of rc.conf having removed it and rebooted before downgrading. this done after reinstalling rebuild open-vm-tools and modules and then Pacman -U reinstalling then at the same time. dunno what would be more efficient and/or what I'm unable to recall.. sorry.
Last edited by yvonney (2012-03-13 11:04:06)
Offline
#23 2012-03-13 17:09:57
- maik-hro
- Member
- Registered: 2011-04-10
- Posts: 31
Re: Xorg 1.12 : no problem so far :)
So, I also dared to upgrade the X.Org-Server and restarted after that. Up to now without any problems. 
% lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Chipset Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A)
00:09.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port E)
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
00:16.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
02:00.0 RAID bus controller: 3ware Inc 9650SE SATA-II RAID PCIe (rev 01)
03:07.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
03:07.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
03:07.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
03:07.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
04:00.0 SATA controller: JMicron Technology Corp. JMB361 AHCI/IDE (rev 02)
04:00.1 IDE interface: JMicron Technology Corp. JMB361 AHCI/IDE (rev 02)
05:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1)
05:00.1 Audio device: NVIDIA Corporation GF104 High Definition Audio Controller (rev a1)Best Regards by Maik.
Offline
#24 2012-03-14 09:05:40
- yvonney
- Member
- Registered: 2008-06-11
- Posts: 671
Re: Xorg 1.12 : no problem so far :)
Having downgrade I'm now considering upgrading to:
open-vm-tools-modules-2011.12.20-7 xf86-input-evdev-2.7.0-1 xf86-input-vmmouse-12.8.0-1
xf86-video-vesa-2.3.0-8 xf86-video-vmware-12.0.0-1 xorg-server-1.12.0-1
the above are the updates offered. I believe this was the xorg-server that was the problem.
anyone tried these?
does the new open-vm-tools-modules etc. fix things.
thanks.
Last edited by yvonney (2012-03-14 09:05:58)
Offline
#25 2012-03-18 17:03:58
- yvonney
- Member
- Registered: 2008-06-11
- Posts: 671
Re: Xorg 1.12 : no problem so far :)
EDITED certain amount of user error here. as of today there's both openvm packages updated.
pdate is terric and working well. thanks!
a couple of days ago i did a regular upgrade, my downgrades were of course replace and the
system booted as expected.
i didn't rebuild open-vm-tools and open-vm-tools-modules as I'd normally do, though whatever I tried
beside the 2 rebuilds i couldn't get the shared folders to operate.
anyone have an tips?
I'm about to try again today with the newer updates and I will rebuild both packages as well, after the
new relevatnt repo package(s) gets installed by pacman -Syu
NOTE: update is fine.
Last edited by yvonney (2012-03-18 18:27:11)
Offline