You are not logged in.

#1 2012-03-21 17:35:46

caasi
Member
Registered: 2012-03-21
Posts: 44
Website

[HELP]`startx` always fail (Catalyst 12.2 and X Server 1.11.4)

My laptop has an integrated Intel graphic chip togheterer with the ATi Mobility HD5650.
To get my Graphics card in use. I add the repo and pacman -S catalyst catalyst-utils according to Arch wiki. (because catalyst 12.2 isn't supporting xorg-server 1.12
so my X Server version is 1.11.4)
During installing catalyst-utils, there are dependency conflicts so I have to remove the libGL. Then, installation runs quite well.
But when I run sudo aticonfig --initial
I got this error:

PowerXpress error: Cannot stat '/usr/lib/fglrx/switchlibGL': No such file or directory
Failed to initialize libglx for discrete GPU

and here I see the similar problem in Gentoo. But I tried, it still no work. (/lib/fglrx/switchlibGL should not be created in that way in theory. mh?)
And on AUR here, I also see some one ask :

Comment by: axed on Wed, 08 Feb 2012 19:56:57  0000
does somebody know where to get the /usr/lib/fglrx/switchlibGl scripts ?

This is my Xorg.0.log

[  1625.782] 
X.Org X Server 1.11.4
Release Date: 2012-01-27
[  1625.782] X Protocol Version 11, Revision 0
[  1625.783] Build Operating System: Linux 3.2.2-1-ARCH i686 
[  1625.783] Current Operating System: Linux halo 3.2.11-1-ARCH #1 SMP PREEMPT Thu Mar 15 09:16:03 UTC 2012 i686
[  1625.791] Kernel command line: root=/dev/sda6 ro
[  1625.799] Build Date: 29 January 2012  03:41:53PM
[  1625.807]  
[  1625.815] Current version of pixman: 0.24.4
[  1625.824] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1625.841] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1625.860] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 21 08:14:25 2012
[  1625.865] (==) Using config file: "/etc/X11/xorg.conf"
[  1625.870] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1625.875] (==) ServerLayout "aticonfig Layout"
[  1625.875] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[  1625.875] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[  1625.875] (**) |   |-->Device "aticonfig-Device[0]-0"
[  1625.875] (==) Automatically adding devices
[  1625.875] (==) Automatically enabling devices
[  1625.876] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[  1625.876] 	Entry deleted from font path.
[  1625.876] 	(Run 'mkfontdir' on "/usr/share/fonts/misc/").
[  1625.876] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[  1625.876] 	Entry deleted from font path.
[  1625.876] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  1625.876] 	Entry deleted from font path.
[  1625.876] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/Type1/".
[  1625.876] 	Entry deleted from font path.
[  1625.876] 	(Run 'mkfontdir' on "/usr/share/fonts/Type1/").
[  1625.876] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1625.876] 	Entry deleted from font path.
[  1625.876] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1625.876] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1625.876] 	Entry deleted from font path.
[  1625.876] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1625.876] (==) FontPath set to:
	
[  1625.876] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1625.876] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1625.876] (II) Loader magic: 0x8228580
[  1625.876] (II) Module ABI versions:
[  1625.876] 	X.Org ANSI C Emulation: 0.4
[  1625.876] 	X.Org Video Driver: 11.0
[  1625.876] 	X.Org XInput driver : 13.0
[  1625.876] 	X.Org Server Extension : 6.0
[  1625.881] (--) PCI:*(0:0:2:0) 8086:0046:17aa:3951 rev 18, Mem @ 0xf8000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[  1625.881] (--) PCI: (0:1:0:0) 1002:68c1:17aa:3951 rev 0, Mem @ 0xc0000000/268435456, 0xf8800000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[  1625.881] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1625.881] (II) "extmod" will be loaded by default.
[  1625.881] (II) "dbe" will be loaded by default.
[  1625.881] (II) "glx" will be loaded by default.
[  1625.881] (II) "record" will be loaded by default.
[  1625.881] (II) "dri" will be loaded by default.
[  1625.881] (II) "dri2" will be loaded by default.
[  1625.882] (II) LoadModule: "extmod"
[  1625.883] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  1625.883] (II) Module extmod: vendor="X.Org Foundation"
[  1625.883] 	compiled for 1.11.4, module version = 1.0.0
[  1625.883] 	Module class: X.Org Server Extension
[  1625.883] 	ABI class: X.Org Server Extension, version 6.0
[  1625.883] (II) Loading extension MIT-SCREEN-SAVER
[  1625.883] (II) Loading extension XFree86-VidModeExtension
[  1625.883] (II) Loading extension XFree86-DGA
[  1625.883] (II) Loading extension DPMS
[  1625.883] (II) Loading extension XVideo
[  1625.883] (II) Loading extension XVideo-MotionCompensation
[  1625.883] (II) Loading extension X-Resource
[  1625.883] (II) LoadModule: "dbe"
[  1625.884] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  1625.884] (II) Module dbe: vendor="X.Org Foundation"
[  1625.884] 	compiled for 1.11.4, module version = 1.0.0
[  1625.884] 	Module class: X.Org Server Extension
[  1625.884] 	ABI class: X.Org Server Extension, version 6.0
[  1625.884] (II) Loading extension DOUBLE-BUFFER
[  1625.884] (II) LoadModule: "glx"
[  1625.885] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1625.886] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[  1625.886] 	compiled for 6.9.0, module version = 1.0.0
[  1625.886] (II) Loading extension GLX
[  1625.886] (II) LoadModule: "record"
[  1625.887] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  1625.887] (II) Module record: vendor="X.Org Foundation"
[  1625.887] 	compiled for 1.11.4, module version = 1.13.0
[  1625.887] 	Module class: X.Org Server Extension
[  1625.887] 	ABI class: X.Org Server Extension, version 6.0
[  1625.887] (II) Loading extension RECORD
[  1625.887] (II) LoadModule: "dri"
[  1625.888] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  1625.888] (II) Module dri: vendor="X.Org Foundation"
[  1625.888] 	compiled for 1.11.4, module version = 1.0.0
[  1625.888] 	ABI class: X.Org Server Extension, version 6.0
[  1625.888] (II) Loading extension XFree86-DRI
[  1625.889] (II) LoadModule: "dri2"
[  1625.889] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  1625.889] (II) Module dri2: vendor="X.Org Foundation"
[  1625.889] 	compiled for 1.11.4, module version = 1.2.0
[  1625.889] 	ABI class: X.Org Server Extension, version 6.0
[  1625.889] (II) Loading extension DRI2
[  1625.889] (II) LoadModule: "fglrx"
[  1625.890] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[  1625.979] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[  1625.979] 	compiled for 1.4.99.906, module version = 8.95.3
[  1625.979] 	Module class: X.Org Video Driver
[  1625.980] (II) Loading sub module "fglrxdrm"
[  1625.980] (II) LoadModule: "fglrxdrm"
[  1625.981] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[  1625.982] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[  1625.982] 	compiled for 1.4.99.906, module version = 8.95.3
[  1625.982] (II) ATI Proprietary Linux Driver Version Identifier:8.95.3
[  1625.982] (II) ATI Proprietary Linux Driver Release Identifier: 8.95                                 
[  1625.982] (II) ATI Proprietary Linux Driver Build Date: Feb 14 2012 21:04:52
[  1625.982] (--) using VT number 7

[  1626.011] (WW) Falling back to old probe method for fglrx
[  1626.052] (II) Loading PCS database from /etc/ati/amdpcsdb
[  1626.056] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[  1626.056] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[  1626.056] (II) fglrx: intel VGA device detected, load intel driver.
[  1626.056] (II) LoadModule: "intel"
[  1626.058] (WW) Warning, couldn't open module intel
[  1626.058] (II) UnloadModule: "intel"
[  1626.058] (II) Unloading intel
[  1626.058] (EE) Failed to load module "intel" (module does not exist, 0)
[  1626.058] (WW) fglrx: Fail to load intel driver!
[  1626.062] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[  1626.062] (II) AMD Video driver is signed
[  1626.065] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[  1626.065] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[  1626.065] (II) fglrx(0): pEnt->device->identifier=0x93f2ae0
[  1626.065] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[  1626.066] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[  1626.066] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  1626.066] (==) fglrx(0): Default visual is TrueColor
[  1626.066] (**) fglrx(0): Option "DPMS" "true"
[  1626.066] (==) fglrx(0): RGB weight 888
[  1626.066] (II) fglrx(0): Using 8 bits per RGB 
[  1626.066] (==) fglrx(0): Buffer Tiling is ON
[  1626.066] (II) Loading sub module "fglrxdrm"
[  1626.066] (II) LoadModule: "fglrxdrm"
[  1626.067] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[  1626.067] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[  1626.067] 	compiled for 1.4.99.906, module version = 8.95.3
[  1626.071] ukiDynamicMajor: found major device number 250
[  1626.071] ukiDynamicMajor: found major device number 250
[  1626.071] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  1626.071] ukiOpenDevice: node name is /dev/ati/card0
[  1626.071] ukiOpenDevice: open result is 11, (OK)
[  1626.071] ukiOpenByBusid: ukiOpenMinor returns 11
[  1626.071] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  1626.072] (**) fglrx(0): NoAccel = NO
[  1626.072] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[  1626.072] (--) fglrx(0): Chipset: "AMD Radeon HD 6500M/5600/5700 Series" (Chipset = 0x68c1)
[  1626.072] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x3951)
[  1626.072] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[  1626.072] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[  1626.072] (--) fglrx(0): MMIO registers at 0xf8800000
[  1626.072] (--) fglrx(0): I/O port at 0x00002000
[  1626.072] (==) fglrx(0): ROM-BIOS at 0x000c0000
[  1626.116] (II) fglrx(0): AC Adapter is used
[  1626.124] (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
[  1626.124] (EE) fglrx(0): Invalid video BIOS signature!
[  1626.124] (EE) fglrx(0): GetBIOSParameter failed
[  1626.124] (EE) fglrx(0): PreInitAdapter failed
[  1626.124] (EE) fglrx(0): PreInit failed
[  1626.124] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === end
[  1626.124] (II) fglrx(0): Interrupt handler Shutdown.
[  1626.132] (II) UnloadModule: "fglrx"
[  1626.132] (II) Unloading fglrx
[  1626.132] (II) UnloadModule: "fglrxdrm"
[  1626.132] (II) Unloading fglrxdrm
[  1626.132] (II) UnloadModule: "fglrxdrm"
[  1626.132] (II) Unloading fglrxdrm
[  1626.132] (EE) Screen(s) found, but none have a usable configuration.
[  1626.132] 
Fatal server error:
[  1626.132] no screens found
[  1626.132] 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  1626.133] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  1626.133] 
[  1626.157] Server terminated with error (1). Closing log file.

This is my xorg.conf

Section "ServerLayout"
	Identifier     "aticonfig Layout"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-0"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	Monitor    "aticonfig-Monitor[0]-0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

BTW. After I install the catalyst, I can't boot successfully

ERROR: Unable to find root device '/dev/disk/by-uid/03619a2f-908f-4724-ba4b-1fb3985e382b' You are being dropped to a recovery shell Type 'exit' to try and continue booting sh: can't access tty; job control turned off.

I have to manually run modprobe ahci,modprobe sd_mod Only in this way can I boot into Arch.

Thanks.

[update]
I try to deactivate the Intel's integrated graphics in BIOS but I still cant start the X. here is the  Xorg.0.conf :

[   507.072] 
X.Org X Server 1.11.4
Release Date: 2012-01-27
[   507.073] X Protocol Version 11, Revision 0
[   507.074] Build Operating System: Linux 3.2.2-1-ARCH i686 
[   507.074] Current Operating System: Linux halo 3.2.11-1-ARCH #1 SMP PREEMPT Thu Mar 15 09:16:03 UTC 2012 i686
[   507.074] Kernel command line: root=/dev/sda6 ro
[   507.075] Build Date: 29 January 2012  03:41:53PM
[   507.075]  
[   507.075] Current version of pixman: 0.24.4
[   507.076] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   507.077] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   507.079] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 00:04:04 2012
[   507.080] (==) Using config file: "/etc/X11/xorg.conf"
[   507.080] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   507.080] (==) ServerLayout "aticonfig Layout"
[   507.080] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[   507.081] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[   507.081] (**) |   |-->Device "aticonfig-Device[0]-0"
[   507.081] (==) Automatically adding devices
[   507.081] (==) Automatically enabling devices
[   507.081] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[   507.081] 	Entry deleted from font path.
[   507.081] 	(Run 'mkfontdir' on "/usr/share/fonts/misc/").
[   507.081] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[   507.081] 	Entry deleted from font path.
[   507.081] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   507.081] 	Entry deleted from font path.
[   507.081] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/Type1/".
[   507.081] 	Entry deleted from font path.
[   507.081] 	(Run 'mkfontdir' on "/usr/share/fonts/Type1/").
[   507.081] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   507.081] 	Entry deleted from font path.
[   507.081] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   507.081] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   507.081] 	Entry deleted from font path.
[   507.081] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   507.081] (==) FontPath set to:
	
[   507.081] (==) ModulePath set to "/usr/lib/xorg/modules"
[   507.081] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   507.081] (II) Loader magic: 0x8228580
[   507.081] (II) Module ABI versions:
[   507.081] 	X.Org ANSI C Emulation: 0.4
[   507.081] 	X.Org Video Driver: 11.0
[   507.081] 	X.Org XInput driver : 13.0
[   507.081] 	X.Org Server Extension : 6.0
[   507.083] (--) PCI:*(0:1:0:0) 1002:68c1:17aa:3928 rev 0, Mem @ 0xd0000000/268435456, 0xf8400000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[   507.083] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   507.083] (II) "extmod" will be loaded by default.
[   507.083] (II) "dbe" will be loaded by default.
[   507.083] (II) "glx" will be loaded by default.
[   507.083] (II) "record" will be loaded by default.
[   507.083] (II) "dri" will be loaded by default.
[   507.083] (II) "dri2" will be loaded by default.
[   507.083] (II) LoadModule: "extmod"
[   507.084] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   507.084] (II) Module extmod: vendor="X.Org Foundation"
[   507.084] 	compiled for 1.11.4, module version = 1.0.0
[   507.084] 	Module class: X.Org Server Extension
[   507.084] 	ABI class: X.Org Server Extension, version 6.0
[   507.084] (II) Loading extension MIT-SCREEN-SAVER
[   507.084] (II) Loading extension XFree86-VidModeExtension
[   507.084] (II) Loading extension XFree86-DGA
[   507.084] (II) Loading extension DPMS
[   507.084] (II) Loading extension XVideo
[   507.084] (II) Loading extension XVideo-MotionCompensation
[   507.084] (II) Loading extension X-Resource
[   507.084] (II) LoadModule: "dbe"
[   507.084] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   507.084] (II) Module dbe: vendor="X.Org Foundation"
[   507.084] 	compiled for 1.11.4, module version = 1.0.0
[   507.084] 	Module class: X.Org Server Extension
[   507.084] 	ABI class: X.Org Server Extension, version 6.0
[   507.084] (II) Loading extension DOUBLE-BUFFER
[   507.084] (II) LoadModule: "glx"
[   507.084] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   507.085] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[   507.085] 	compiled for 6.9.0, module version = 1.0.0
[   507.085] (II) Loading extension GLX
[   507.085] (II) LoadModule: "record"
[   507.086] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   507.086] (II) Module record: vendor="X.Org Foundation"
[   507.086] 	compiled for 1.11.4, module version = 1.13.0
[   507.086] 	Module class: X.Org Server Extension
[   507.086] 	ABI class: X.Org Server Extension, version 6.0
[   507.086] (II) Loading extension RECORD
[   507.086] (II) LoadModule: "dri"
[   507.086] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   507.087] (II) Module dri: vendor="X.Org Foundation"
[   507.087] 	compiled for 1.11.4, module version = 1.0.0
[   507.087] 	ABI class: X.Org Server Extension, version 6.0
[   507.087] (II) Loading extension XFree86-DRI
[   507.087] (II) LoadModule: "dri2"
[   507.087] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   507.087] (II) Module dri2: vendor="X.Org Foundation"
[   507.087] 	compiled for 1.11.4, module version = 1.2.0
[   507.087] 	ABI class: X.Org Server Extension, version 6.0
[   507.087] (II) Loading extension DRI2
[   507.087] (II) LoadModule: "fglrx"
[   507.087] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   507.135] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[   507.135] 	compiled for 1.4.99.906, module version = 8.95.3
[   507.135] 	Module class: X.Org Video Driver
[   507.136] (II) Loading sub module "fglrxdrm"
[   507.136] (II) LoadModule: "fglrxdrm"
[   507.136] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   507.137] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[   507.137] 	compiled for 1.4.99.906, module version = 8.95.3
[   507.137] (II) ATI Proprietary Linux Driver Version Identifier:8.95.3
[   507.137] (II) ATI Proprietary Linux Driver Release Identifier: 8.95                                 
[   507.137] (II) ATI Proprietary Linux Driver Build Date: Feb 14 2012 21:04:52
[   507.137] (--) using VT number 7

[   507.144] (WW) Falling back to old probe method for fglrx
[   507.170] (II) Loading PCS database from /etc/ati/amdpcsdb
[   507.173] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[   507.173] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[   507.174] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[   507.174] (II) AMD Video driver is signed
[   507.174] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   507.174] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   507.174] (II) fglrx(0): pEnt->device->identifier=0x9ec9ae0
[   507.174] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[   507.174] (II) Loading sub module "vgahw"
[   507.174] (II) LoadModule: "vgahw"
[   507.175] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   507.175] (II) Module vgahw: vendor="X.Org Foundation"
[   507.175] 	compiled for 1.11.4, module version = 0.1.0
[   507.175] 	ABI class: X.Org Video Driver, version 11.0
[   507.175] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[   507.175] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   507.175] (==) fglrx(0): Default visual is TrueColor
[   507.175] (**) fglrx(0): Option "DPMS" "true"
[   507.175] (==) fglrx(0): RGB weight 888
[   507.175] (II) fglrx(0): Using 8 bits per RGB 
[   507.175] (==) fglrx(0): Buffer Tiling is ON
[   507.175] (II) Loading sub module "fglrxdrm"
[   507.175] (II) LoadModule: "fglrxdrm"
[   507.175] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   507.175] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[   507.175] 	compiled for 1.4.99.906, module version = 8.95.3
[   507.178] ukiDynamicMajor: found major device number 252
[   507.178] ukiDynamicMajor: found major device number 252
[   507.178] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   507.178] ukiOpenDevice: node name is /dev/ati/card0
[   507.178] ukiOpenDevice: open result is 11, (OK)
[   507.178] ukiOpenByBusid: ukiOpenMinor returns 11
[   507.178] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   507.179] (**) fglrx(0): NoAccel = NO
[   507.179] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[   507.179] (--) fglrx(0): Chipset: "AMD Radeon HD 6500M/5600/5700 Series" (Chipset = 0x68c1)
[   507.179] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x3928)
[   507.179] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[   507.179] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[   507.179] (--) fglrx(0): MMIO registers at 0xf8400000
[   507.179] (--) fglrx(0): I/O port at 0x00002000
[   507.179] (==) fglrx(0): ROM-BIOS at 0x000c0000
[   507.210] (II) fglrx(0): Battery is used
[   507.214] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[   507.555] (II) Loading sub module "vbe"
[   507.555] (II) LoadModule: "vbe"
[   507.556] (II) Loading /usr/lib/xorg/modules/libvbe.so
[   507.556] (II) Module vbe: vendor="X.Org Foundation"
[   507.556] 	compiled for 1.11.4, module version = 1.1.0
[   507.556] 	ABI class: X.Org Video Driver, version 11.0
[   507.556] (II) fglrx(0): VESA BIOS detected
[   507.556] (II) fglrx(0): VESA VBE Version 3.0
[   507.556] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[   507.556] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[   507.556] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[   507.556] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[   507.556] (II) fglrx(0): VESA VBE OEM Product: MADISON
[   507.556] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[   507.592] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[   507.592] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[   507.592] (II) fglrx(0): PCIE card detected
[   507.592] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[   507.592] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[   507.604] (II) fglrx(0): Using adapter: 1:0.0.
[   507.742] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[   508.062] (II) fglrx(0): Interrupt handler installed at IRQ 47.
[   508.063] (II) fglrx(0): RandR 1.2 support is enabled!
[   508.063] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[   508.063] (==) fglrx(0): Center Mode is disabled 
[   508.063] (II) Loading sub module "fb"
[   508.063] (II) LoadModule: "fb"
[   508.063] (II) Loading /usr/lib/xorg/modules/libfb.so
[   508.063] (II) Module fb: vendor="X.Org Foundation"
[   508.063] 	compiled for 1.11.4, module version = 1.0.0
[   508.063] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   508.063] (II) Loading sub module "ddc"
[   508.063] (II) LoadModule: "ddc"
[   508.063] (II) Module "ddc" already built-in
[   508.179] (II) fglrx(0): Finished Initialize PPLIB!
[   508.180] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[   508.180] (II) fglrx(0): Output DFP1 has no monitor section
[   508.180] (II) fglrx(0): Output CRT1 has no monitor section
[   508.180] (II) Loading sub module "ddc"
[   508.180] (II) LoadModule: "ddc"
[   508.180] (II) Module "ddc" already built-in
[   508.180] (II) fglrx(0): Connected Display0: LVDS
[   508.180] (II) fglrx(0): Display0 EDID data ---------------------------
[   508.180] (II) fglrx(0): Manufacturer: SEC  Model: 3049  Serial#: 1
[   508.180] (II) fglrx(0): Year: 2009  Week: 0
[   508.180] (II) fglrx(0): EDID Version: 1.3
[   508.180] (II) fglrx(0): Digital Display Input
[   508.180] (II) fglrx(0): Max Image Size [cm]: horiz.: 32  vert.: 19
[   508.180] (II) fglrx(0): Gamma: 2.20
[   508.180] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[   508.180] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   508.180] (II) fglrx(0): First detailed timing is preferred mode
[   508.180] (II) fglrx(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[   508.180] (II) fglrx(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[   508.180] (II) fglrx(0): Manufacturer's mask: 0
[   508.180] (II) fglrx(0): Supported detailed timing:
[   508.180] (II) fglrx(0): clock: 75.1 MHz   Image Size:  309 x 174 mm
[   508.180] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1572 h_border: 0
[   508.180] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 796 v_border: 0
[   508.180] (II) fglrx(0): Supported detailed timing:
[   508.180] (II) fglrx(0): clock: 50.0 MHz   Image Size:  309 x 174 mm
[   508.180] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1572 h_border: 0
[   508.181] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 796 v_border: 0
[   508.181] (II) fglrx(0):  SAMSUNG
[   508.181] (II) fglrx(0):  140AT11-L01
[   508.181] (II) fglrx(0): EDID (in hex):
[   508.181] (II) fglrx(0): 	00ffffffffffff004ca3493001000000
[   508.181] (II) fglrx(0): 	0013010380201378ea87e594574f8c27
[   508.181] (II) fglrx(0): 	22505400000001010101010101010101
[   508.181] (II) fglrx(0): 	010101010101541d56ce50001c303020
[   508.181] (II) fglrx(0): 	250035ae100000198d1356ce50001c30
[   508.181] (II) fglrx(0): 	3020250035ae10000019000000fe0053
[   508.181] (II) fglrx(0): 	414d53554e470a2020202020000000fe
[   508.181] (II) fglrx(0): 	00313430415431312d4c30310a20005b
[   508.181] (II) fglrx(0): End of Display0 EDID data --------------------
[   508.182] (II) fglrx(0): EDID for output LVDS
[   508.182] (II) fglrx(0): Manufacturer: SEC  Model: 3049  Serial#: 1
[   508.182] (II) fglrx(0): Year: 2009  Week: 0
[   508.182] (II) fglrx(0): EDID Version: 1.3
[   508.182] (II) fglrx(0): Digital Display Input
[   508.182] (II) fglrx(0): Max Image Size [cm]: horiz.: 32  vert.: 19
[   508.182] (II) fglrx(0): Gamma: 2.20
[   508.182] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[   508.182] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   508.182] (II) fglrx(0): First detailed timing is preferred mode
[   508.182] (II) fglrx(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[   508.182] (II) fglrx(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[   508.182] (II) fglrx(0): Manufacturer's mask: 0
[   508.182] (II) fglrx(0): Supported detailed timing:
[   508.182] (II) fglrx(0): clock: 75.1 MHz   Image Size:  309 x 174 mm
[   508.182] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1572 h_border: 0
[   508.182] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 796 v_border: 0
[   508.182] (II) fglrx(0): Supported detailed timing:
[   508.182] (II) fglrx(0): clock: 50.0 MHz   Image Size:  309 x 174 mm
[   508.182] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1572 h_border: 0
[   508.182] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 796 v_border: 0
[   508.182] (II) fglrx(0):  SAMSUNG
[   508.182] (II) fglrx(0):  140AT11-L01
[   508.182] (II) fglrx(0): EDID (in hex):
[   508.182] (II) fglrx(0): 	00ffffffffffff004ca3493001000000
[   508.182] (II) fglrx(0): 	0013010380201378ea87e594574f8c27
[   508.182] (II) fglrx(0): 	22505400000001010101010101010101
[   508.182] (II) fglrx(0): 	010101010101541d56ce50001c303020
[   508.182] (II) fglrx(0): 	250035ae100000198d1356ce50001c30
[   508.182] (II) fglrx(0): 	3020250035ae10000019000000fe0053
[   508.182] (II) fglrx(0): 	414d53554e470a2020202020000000fe
[   508.182] (II) fglrx(0): 	00313430415431312d4c30310a20005b
[   508.182] (II) fglrx(0): EDID vendor "SEC", prod id 12361
[   508.182] (II) fglrx(0): Printing DDC gathered Modelines:
[   508.182] (II) fglrx(0): Modeline "1366x768"x0.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[   508.182] (II) fglrx(0): Modeline "1366x768"x0.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[   508.182] (II) fglrx(0): Printing probed modes for output LVDS
[   508.182] (II) fglrx(0): Modeline "1366x768"x60.0   75.08  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[   508.182] (II) fglrx(0): Modeline "1366x768"x40.0   50.05  1366 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[   508.182] (II) fglrx(0): Modeline "1360x768"x60.0   75.08  1360 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[   508.182] (II) fglrx(0): Modeline "1360x768"x40.0   50.05  1360 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[   508.182] (II) fglrx(0): Modeline "1280x768"x60.0   75.08  1280 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[   508.182] (II) fglrx(0): Modeline "1280x768"x40.0   50.05  1280 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[   508.182] (II) fglrx(0): Modeline "1280x720"x60.0   75.08  1280 1414 1446 1572  720 770 775 796 -hsync -vsync (47.8 kHz)
[   508.182] (II) fglrx(0): Modeline "1280x720"x40.0   50.05  1280 1414 1446 1572  720 770 775 796 -hsync -vsync (31.8 kHz)
[   508.182] (II) fglrx(0): Modeline "1024x768"x60.0   75.08  1024 1414 1446 1572  768 770 775 796 -hsync -vsync (47.8 kHz)
[   508.182] (II) fglrx(0): Modeline "1024x768"x40.0   50.05  1024 1414 1446 1572  768 770 775 796 -hsync -vsync (31.8 kHz)
[   508.182] (II) fglrx(0): Modeline "1024x600"x60.0   75.08  1024 1414 1446 1572  600 770 775 796 -hsync -vsync (47.8 kHz)
[   508.182] (II) fglrx(0): Modeline "1024x600"x40.0   50.05  1024 1414 1446 1572  600 770 775 796 -hsync -vsync (31.8 kHz)
[   508.182] (II) fglrx(0): Modeline "800x600"x60.0   75.08  800 1414 1446 1572  600 770 775 796 -hsync -vsync (47.8 kHz)
[   508.182] (II) fglrx(0): Modeline "800x600"x40.0   50.05  800 1414 1446 1572  600 770 775 796 -hsync -vsync (31.8 kHz)
[   508.182] (II) fglrx(0): Modeline "800x480"x60.0   75.08  800 1414 1446 1572  480 770 775 796 -hsync -vsync (47.8 kHz)
[   508.182] (II) fglrx(0): Modeline "800x480"x40.0   50.05  800 1414 1446 1572  480 770 775 796 -hsync -vsync (31.8 kHz)
[   508.182] (II) fglrx(0): Modeline "640x480"x60.0   75.08  640 1414 1446 1572  480 770 775 796 -hsync -vsync (47.8 kHz)
[   508.182] (II) fglrx(0): Modeline "640x480"x40.0   50.05  640 1414 1446 1572  480 770 775 796 -hsync -vsync (31.8 kHz)
[   508.183] (II) fglrx(0): EDID for output DFP1
[   508.183] (II) fglrx(0): EDID for output CRT1
[   508.183] (II) fglrx(0): Output LVDS connected
[   508.183] (II) fglrx(0): Output DFP1 disconnected
[   508.183] (II) fglrx(0): Output CRT1 disconnected
[   508.183] (II) fglrx(0): Using exact sizes for initial modes
[   508.183] (II) fglrx(0): Output LVDS using initial mode 1366x768
[   508.183] (II) fglrx(0): Display dimensions: (320, 190) mm
[   508.183] (II) fglrx(0): DPI set to (108, 102)
[   508.183] (II) fglrx(0): Eyefinity capable adapter detected.
[   508.183] (II) fglrx(0): Adapter AMD Radeon HD 6500M/5600/5700 Series has 6 configurable heads and 1 displays connected.
[   508.183] (==) fglrx(0):  PseudoColor visuals disabled
[   508.183] (II) Loading sub module "ramdac"
[   508.183] (II) LoadModule: "ramdac"
[   508.183] (II) Module "ramdac" already built-in
[   508.183] (==) fglrx(0): NoDRI = NO
[   508.183] (==) fglrx(0): Capabilities: 0x00000000
[   508.183] (==) fglrx(0): CapabilitiesEx: 0x00000000
[   508.183] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[   508.183] (==) fglrx(0): UseFastTLS=0
[   508.183] (==) fglrx(0): BlockSignalsOnLock=1
[   508.183] (--) Depth 24 pixmap format is 32 bpp
[   508.183] (II) Loading extension ATIFGLRXDRI
[   508.183] (II) fglrx(0): doing swlDriScreenInit
[   508.183] (II) fglrx(0): swlDriScreenInit for fglrx driver
[   508.183] ukiDynamicMajor: found major device number 252
[   508.183] ukiDynamicMajor: found major device number 252
[   508.183] ukiDynamicMajor: found major device number 252
[   508.183] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   508.183] ukiOpenDevice: node name is /dev/ati/card0
[   508.183] ukiOpenDevice: open result is 16, (OK)
[   508.183] ukiOpenByBusid: ukiOpenMinor returns 16
[   508.183] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   508.184] (II) fglrx(0): [uki] DRM interface version 1.0
[   508.184] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[   508.184] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x92000
[   508.184] (II) fglrx(0): [uki] mapped SAREA 0x92000 to 0xb623c000
[   508.184] (II) fglrx(0): [uki] framebuffer handle = 0x93000
[   508.184] (II) fglrx(0): [uki] added 1 reserved context for kernel
[   508.184] (II) fglrx(0): swlDriScreenInit done
[   508.184] (II) fglrx(0): Kernel Module Version Information:
[   508.184] (II) fglrx(0):     Name: fglrx
[   508.184] (II) fglrx(0):     Version: 8.95.3
[   508.184] (II) fglrx(0):     Date: Feb 14 2012
[   508.184] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[   508.184] (II) fglrx(0): Kernel Module version matches driver.
[   508.184] (II) fglrx(0): Kernel Module Build Time Information:
[   508.184] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.9-1-ARCH
[   508.184] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[   508.184] (II) fglrx(0):     Build-Kernel __SMP__:            no
[   508.184] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[   508.184] (II) fglrx(0): [uki] register handle = 0x00094000
[   508.207] (II) fglrx(0): DRI initialization successfull
[   508.207] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[   508.208] (==) fglrx(0): Backing store disabled
[   508.208] (II) Loading extension FGLRXEXTENSION
[   508.208] (**) fglrx(0): DPMS enabled
[   508.208] (II) fglrx(0): Initialized in-driver Xinerama extension
[   508.208] (**) fglrx(0): Textured Video is enabled.
[   508.208] (II) LoadModule: "glesx"
[   508.208] (II) Loading /usr/lib/xorg/modules/glesx.so
[   508.210] (II) Module glesx: vendor="X.Org Foundation"
[   508.210] 	compiled for 1.4.99.906, module version = 1.0.0
[   508.210] (II) Loading extension GLESX
[   508.210] (II) fglrx(0): GLESX enableFlags = 592
[   508.210] (II) fglrx(0): GLESX is enabled
[   508.210] (II) LoadModule: "amdxmm"
[   508.210] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[   508.210] (II) Module amdxmm: vendor="X.Org Foundation"
[   508.210] 	compiled for 1.4.99.906, module version = 2.0.0
[   508.220] (II) Loading extension AMDXVOPL
[   508.220] (II) Loading extension AMDXVBA
[   508.222] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[   508.225] (II) fglrx(0): Enable composite support successfully
[   508.225] (WW) fglrx(0): Option "VendorName" is not used
[   508.225] (WW) fglrx(0): Option "ModelName" is not used
[   508.225] (II) fglrx(0): X context handle = 0x1
[   508.225] (II) fglrx(0): [DRI] installation complete
[   508.226] (==) fglrx(0): Silken mouse enabled
[   508.226] (==) fglrx(0): Using HW cursor of display infrastructure!
[   508.226] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[   508.227] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[   508.227] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[   509.579] (--) RandR disabled
[   509.579] (II) Initializing built-in extension Generic Event Extension
[   509.579] (II) Initializing built-in extension SHAPE
[   509.579] (II) Initializing built-in extension MIT-SHM
[   509.579] (II) Initializing built-in extension XInputExtension
[   509.579] (II) Initializing built-in extension XTEST
[   509.579] (II) Initializing built-in extension BIG-REQUESTS
[   509.579] (II) Initializing built-in extension SYNC
[   509.579] (II) Initializing built-in extension XKEYBOARD
[   509.579] (II) Initializing built-in extension XC-MISC
[   509.579] (II) Initializing built-in extension SECURITY
[   509.579] (II) Initializing built-in extension XINERAMA
[   509.579] (II) Initializing built-in extension XFIXES
[   509.579] (II) Initializing built-in extension RENDER
[   509.579] (II) Initializing built-in extension RANDR
[   509.579] (II) Initializing built-in extension COMPOSITE
[   509.579] (II) Initializing built-in extension DAMAGE
[   509.583] ukiDynamicMajor: found major device number 252
[   509.583] ukiDynamicMajor: found major device number 252
[   509.583] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[   509.583] ukiOpenDevice: node name is /dev/ati/card0
[   509.583] ukiOpenDevice: open result is 17, (OK)
[   509.583] ukiOpenByBusid: ukiOpenMinor returns 17
[   509.583] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[   509.680] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[   509.701] (II) fglrx(0): Enable the clock gating!
[   509.701] (II) fglrx(0): Setting screen physical size to 361 x 203
[   509.777] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   509.777] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   509.777] (II) LoadModule: "evdev"
[   509.778] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   509.778] (II) Module evdev: vendor="X.Org Foundation"
[   509.778] 	compiled for 1.10.99.902, module version = 2.6.0
[   509.778] 	Module class: X.Org XInput Driver
[   509.778] 	ABI class: X.Org XInput driver, version 13.0
[   509.778] (II) Using input driver 'evdev' for 'Power Button'
[   509.778] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   509.778] (**) Power Button: always reports core events
[   509.778] (**) Power Button: Device: "/dev/input/event4"
[   509.778] (--) Power Button: Found keys
[   509.778] (II) Power Button: Configuring as keyboard
[   509.778] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[   509.778] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   509.778] (**) Option "xkb_rules" "evdev"
[   509.778] (**) Option "xkb_model" "evdev"
[   509.778] (**) Option "xkb_layout" "us"
[   509.846] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[   509.846] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   509.846] (II) Using input driver 'evdev' for 'Video Bus'
[   509.846] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   509.846] (**) Video Bus: always reports core events
[   509.846] (**) Video Bus: Device: "/dev/input/event5"
[   509.846] (--) Video Bus: Found keys
[   509.846] (II) Video Bus: Configuring as keyboard
[   509.846] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5/event5"
[   509.846] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   509.846] (**) Option "xkb_rules" "evdev"
[   509.846] (**) Option "xkb_model" "evdev"
[   509.846] (**) Option "xkb_layout" "us"
[   509.847] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   509.847] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   509.847] (II) Using input driver 'evdev' for 'Power Button'
[   509.847] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   509.847] (**) Power Button: always reports core events
[   509.847] (**) Power Button: Device: "/dev/input/event2"
[   509.847] (--) Power Button: Found keys
[   509.847] (II) Power Button: Configuring as keyboard
[   509.847] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[   509.847] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   509.847] (**) Option "xkb_rules" "evdev"
[   509.847] (**) Option "xkb_model" "evdev"
[   509.847] (**) Option "xkb_layout" "us"
[   509.848] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   509.848] (II) No input driver specified, ignoring this device.
[   509.848] (II) This device may have been added with another device file.
[   509.848] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[   509.848] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   509.848] (II) Using input driver 'evdev' for 'Sleep Button'
[   509.848] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   509.848] (**) Sleep Button: always reports core events
[   509.848] (**) Sleep Button: Device: "/dev/input/event3"
[   509.848] (--) Sleep Button: Found keys
[   509.848] (II) Sleep Button: Configuring as keyboard
[   509.848] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[   509.848] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   509.848] (**) Option "xkb_rules" "evdev"
[   509.848] (**) Option "xkb_model" "evdev"
[   509.848] (**) Option "xkb_layout" "us"
[   509.849] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event13)
[   509.849] (II) No input driver specified, ignoring this device.
[   509.849] (II) This device may have been added with another device file.
[   509.849] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[   509.849] (II) No input driver specified, ignoring this device.
[   509.849] (II) This device may have been added with another device file.
[   509.849] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[   509.849] (II) No input driver specified, ignoring this device.
[   509.849] (II) This device may have been added with another device file.
[   509.850] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[   509.850] (II) No input driver specified, ignoring this device.
[   509.850] (II) This device may have been added with another device file.
[   509.850] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event14)
[   509.850] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[   509.850] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[   509.850] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   509.850] (**) USB Optical Mouse: always reports core events
[   509.850] (**) USB Optical Mouse: Device: "/dev/input/event14"
[   509.850] (--) USB Optical Mouse: Found 3 mouse buttons
[   509.850] (--) USB Optical Mouse: Found scroll wheel(s)
[   509.850] (--) USB Optical Mouse: Found relative axes
[   509.850] (--) USB Optical Mouse: Found x and y relative axes
[   509.850] (II) USB Optical Mouse: Configuring as mouse
[   509.850] (II) USB Optical Mouse: Adding scrollwheel support
[   509.850] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
[   509.850] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   509.850] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input14/event14"
[   509.850] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[   509.850] (II) USB Optical Mouse: initialized for relative axes.
[   509.850] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[   509.850] (**) USB Optical Mouse: (accel) acceleration profile 0
[   509.850] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[   509.850] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[   509.851] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse2)
[   509.851] (II) No input driver specified, ignoring this device.
[   509.851] (II) This device may have been added with another device file.
[   509.851] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event15)
[   509.851] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[   509.851] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[   509.851] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   509.851] (**) Lenovo EasyCamera: always reports core events
[   509.851] (**) Lenovo EasyCamera: Device: "/dev/input/event15"
[   509.851] (--) Lenovo EasyCamera: Found keys
[   509.851] (II) Lenovo EasyCamera: Configuring as keyboard
[   509.851] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input15/event15"
[   509.851] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 11)
[   509.851] (**) Option "xkb_rules" "evdev"
[   509.851] (**) Option "xkb_model" "evdev"
[   509.851] (**) Option "xkb_layout" "us"
[   509.852] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   509.852] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   509.852] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   509.852] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   509.852] (**) AT Translated Set 2 keyboard: always reports core events
[   509.852] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   509.852] (--) AT Translated Set 2 keyboard: Found keys
[   509.852] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[   509.852] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   509.852] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[   509.852] (**) Option "xkb_rules" "evdev"
[   509.852] (**) Option "xkb_model" "evdev"
[   509.852] (**) Option "xkb_layout" "us"
[   509.853] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event7)
[   509.853] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[   509.853] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[   509.853] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   509.853] (**) PS/2 Generic Mouse: always reports core events
[   509.853] (**) PS/2 Generic Mouse: Device: "/dev/input/event7"
[   509.853] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[   509.853] (--) PS/2 Generic Mouse: Found relative axes
[   509.853] (--) PS/2 Generic Mouse: Found x and y relative axes
[   509.853] (II) PS/2 Generic Mouse: Configuring as mouse
[   509.853] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[   509.853] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   509.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio3/input/input7/event7"
[   509.853] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 13)
[   509.853] (II) PS/2 Generic Mouse: initialized for relative axes.
[   509.853] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[   509.853] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[   509.853] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[   509.853] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[   509.853] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
[   509.853] (II) No input driver specified, ignoring this device.
[   509.853] (II) This device may have been added with another device file.
[   509.854] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[   509.854] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   509.854] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[   509.854] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   509.854] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   509.854] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event8"
[   509.854] (--) SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[   509.854] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
[   509.854] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[   509.854] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[   509.854] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
[   509.854] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[   509.854] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   509.854] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event8"
[   509.854] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[   509.854] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[   509.854] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   509.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[   509.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   509.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   509.854] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   509.854] (II) No input driver specified, ignoring this device.
[   509.854] (II) This device may have been added with another device file.
[   509.855] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event12)
[   509.855] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[   509.855] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[   509.855] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   509.855] (**) Ideapad extra buttons: always reports core events
[   509.855] (**) Ideapad extra buttons: Device: "/dev/input/event12"
[   509.855] (--) Ideapad extra buttons: Found keys
[   509.855] (II) Ideapad extra buttons: Configuring as keyboard
[   509.855] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input12/event12"
[   509.855] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 15)
[   509.855] (**) Option "xkb_rules" "evdev"
[   509.855] (**) Option "xkb_model" "evdev"
[   509.855] (**) Option "xkb_layout" "us"
[   509.855] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   509.855] (II) No input driver specified, ignoring this device.
[   509.855] (II) This device may have been added with another device file.
[   509.860] (II) fglrx(0): AC Online
[   509.896] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[   509.956] (II) Power Button: Close
[   509.956] (II) UnloadModule: "evdev"
[   509.956] (II) Unloading evdev
[   510.003] (II) Video Bus: Close
[   510.003] (II) UnloadModule: "evdev"
[   510.003] (II) Unloading evdev
[   510.110] (II) Power Button: Close
[   510.110] (II) UnloadModule: "evdev"
[   510.110] (II) Unloading evdev
[   510.216] (II) Sleep Button: Close
[   510.216] (II) UnloadModule: "evdev"
[   510.216] (II) Unloading evdev
[   510.323] (II) USB Optical Mouse: Close
[   510.323] (II) UnloadModule: "evdev"
[   510.323] (II) Unloading evdev
[   510.430] (II) Lenovo EasyCamera: Close
[   510.430] (II) UnloadModule: "evdev"
[   510.430] (II) Unloading evdev
[   510.536] (II) AT Translated Set 2 keyboard: Close
[   510.536] (II) UnloadModule: "evdev"
[   510.536] (II) Unloading evdev
[   510.643] (II) PS/2 Generic Mouse: Close
[   510.643] (II) UnloadModule: "evdev"
[   510.643] (II) Unloading evdev
[   510.749] (II) SynPS/2 Synaptics TouchPad: Close
[   510.750] (II) UnloadModule: "evdev"
[   510.750] (II) Unloading evdev
[   510.856] (II) Ideapad extra buttons: Close
[   510.856] (II) UnloadModule: "evdev"
[   510.856] (II) Unloading evdev
[   510.862] (II) fglrx(0): Shutdown CMMQS
[   510.862] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[   510.862] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x92000 at 0xb623c000
[   510.879] (EE) fglrx(0): PPLIB: swlPPLibNotifyEventToPPLib() failed!
[   510.879] (EE) fglrx(0):        ulEventType = 00000023, ulEventData = 00000001
[   510.897] (II) fglrx(0): Interrupt handler Shutdown.
[   511.932] Server terminated successfully (0). Closing log file.

Anyone know how to kill these errors/warmings. even some of them, or any advice and I'll much appreciate.
Thank you very much.

Last edited by caasi (2012-03-22 05:21:00)

Offline

#2 2012-03-21 17:38:22

karol
Archivist
Registered: 2009-05-06
Posts: 25,428

Re: [HELP]`startx` always fail (Catalyst 12.2 and X Server 1.11.4)

Please use [ code] tags https://bbs.archlinux.org/help.php#bbcode

like this

or [ quote ] tags instead of [ ins ] tags - that bright yellow if hard on the eyes.

Offline

#3 2012-03-22 04:58:31

caasi
Member
Registered: 2012-03-21
Posts: 44
Website

Re: [HELP]`startx` always fail (Catalyst 12.2 and X Server 1.11.4)

sorry, I'n new here. Just corrected.

Offline

#4 2012-03-22 10:18:15

Radioactiveman
Member
From: Germany
Registered: 2010-05-13
Posts: 376

Re: [HELP]`startx` always fail (Catalyst 12.2 and X Server 1.11.4)

Try running

# aticonfig --initial -f

when the intel card is disabled.

Offline

Board footer

Powered by FluxBB