You are not logged in.
Okay I have an Arch installation with connman and E17. I have connmand after hal and dbus in my rc.conf and the connection manager module loaded but the module finds no interfaces or networks. According to the wiki all I had to do was install connman, add connmand to my rc.conf and load the module. I installed E17 by running "pacman -S e17-svn e17-extra-svn" and installed connman with packer. I have a rtl8188ce PCI WLAN controller and an Atheros AR8152/8158 fast ethernet controller and neither show up. I don't know much about connman or using it or anything so I don't really have much information to give. If someone who uses connman and E17 and has it working could show me how you set everything up, what version you are using and some tips, I would be very grateful. Please and thank you.
Last edited by DiscipleOfDante (2012-03-28 14:02:20)
Offline
HAL is deprecated now, we have udev and policykit. By default, udev is in mkinitcpio so just remove HAL. If you do not know much about connman and are still having issues I recommend you use networkmanager or wicd (the former especially) since more Archers will be able to help you.
Offline
I removed hal and am still having issues. I networkmanager and WiCD are not behaving either (I especially dislike WiCD) and I was hoping to use Connman because I have heard good things about it and it has a native module in E17. I like things to integrate better. If absolutely 100% necessary I will use networkmanager or WiCD and try to get it to behave but until then I would prefer to try and use Connman.
Last edited by DiscipleOfDante (2012-03-26 18:38:33)
Offline
I'm running connman from the AUR, version 0.77-3 for i686. Installed with the command:
pacman -U connman-0.77-3-i686.pkg.tar.xzThis is my daemons array from rc.conf:
DAEMONS=(hwclock syslog-ng dbus connmand iptables netfs crond cupsd)One other thing that may help, I originally had networkmanager installed, and per the Wiki I had this in my rc.conf file:
INTERFACES=(!eth0 !wlan0)
#interface=eth0
address=
netmask=
broadcast=
gateway=That is still in my conf file and connman works just fine on my machine. Really wasn't much to it, fired up E17, it said looking for connman, and then when the desktop came up the network card was there.
I do have an ancient wireless card and had to install the b43 firmware out of the AUR to make it work, but the wired card on eth0 was found fine. The only other thing I can think of is I installed connman per the directions in the E17 Wiki https://wiki.archlinux.org/index.php/E17, not the Connman wiki. One of the parts of the E17 wiki said you don't need to follow any of the other directions in the Connman wiki, and I didn't.
Hope there is something in this response that can help you.
Offline
I think I need an older version of ConnMan. I tried adding iptables and netfs to my DAEMONS, and I tried commenting out my interfaces but that didn't work so I can only assume it is that I need an earlier version. Probably 0.78
Last edited by DiscipleOfDante (2012-03-26 23:52:40)
Offline
Any idea how I can get it aside from compiling it from source myself?
Offline
I'm not completely clear on how you obtained and installed Connman. Did you get the package file from AUR, build it and install using pacman? You mention using "packer" in your first post and I am not sure if that was a typo or something I'm not familiar with.
I see in the comments in the AUR that there seem to be a lot of problems with the latest available version, so maybe that is all that it is. I still have the tar.xz file I reference above which I built from the AUR and installed If you send me an email containing your address I'd be happy to send it to you.
Offline
I did get it from the AUR. Packer is a cli application that uses the same syntax as pacman to easily download and install packages from the AUR. Also I use x86_64
Offline
OK, something I'm not familiar with then. Hardly a surprise as I'm kind of new to these parts.
A couple of other things. I built Connman manually and during that process a message popped up about it needing the package Bluez. I don't recall if it was a build time or run time dependency, but I do remember that I installed it manually using Pacman. I don't know if Pacman or Packer would pick up on that dependency since I short circuited it. I am running with the Bluez package (from the extra repo) installed on my system even though I have no Bluetooth devices.
The deamon called connmand should be installed (by Pacman or Packer) inside /etc/rc.d. You've not mentioned getting an error during boot about a missing deamon so I'm assuming it is, but I'm about out of ideas so figured I'd ask, is it there?
Offline
I do have bluez installed and yes the daemon is there. I am just going to try and edit the pkgbuild of connman to install 0.78
Last edited by DiscipleOfDante (2012-03-27 23:05:46)
Offline
I have gotten it working. I edited the AUR PKGBUILD of connman to install connman 0.78 and all was well. It connected with ninja speed and is running beautifully. I am very impressed and very content now. I call this solved.
Offline
I stand corrected. Upon a reboot my system would not get internet access, even if connected to a wireless network. I am thinking I probably messed up on the PKGBUILF. I will have to figure something out. If someone has the old tarball for 0.78 or earlier still please inform me.
Last edited by DiscipleOfDante (2012-03-28 14:04:32)
Offline