Arch Linux

LessWire

Member

From: Bavaria

Registered: 2010-06-14

Posts: 46

xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

I just did the upgrade on my 64 bit machine using a Radeon HD 5750 (green series) vga card with 2560x1600 resolution.

X starts without any warnings or errors in the log but i see only some quirks on top of the screen and the mouse cursor is a huge square.

I downgraded to the previous version xf86-video-ati 6.14.3-2 and all works fine again.

Anybody else has this effect, especially with a 57xx graphics card?

Thanks in advance, LW.

Last edited by LessWire (2012-03-30 22:27:28)

saturn_knight

Member

Registered: 2010-10-16

Posts: 9

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

I'm having the same problem here with the Radeon HD 4650. I am also running 64-bit.

Resulting Xorg.log

[    17.244] (EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
[dri] This chipset requires a kernel module version of 1.17.0,
[dri] but the kernel reports a version of 2.12.0.[dri] Make sure your module is loaded prior to starting X, and
[dri] that this driver was built with support for KMS.
[dri] Aborting.
[    17.244] (II) RADEON(0): RADEONFreeScreen
[    17.244] (II) UnloadModule: "radeon"
[    17.244] (II) UnloadSubModule: "int10"
[    17.244] (II) Unloading int10
[    17.244] (II) UnloadSubModule: "vgahw"
[    17.244] (II) Unloading vgahw
[    17.244] (EE) Screen(s) found, but none have a usable configuration.
[    17.244] 
Fatal server error:
[    17.244] no screens found
[    17.244] 

Last edited by saturn_knight (2012-03-30 01:32:39)

Dastingo

Member

Registered: 2011-01-15

Posts: 41

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Confirmed with HD3100, workaround is to downgrade xf86-video-ati.
Hopefully will get fixed soon.

watacaweb

Member

From: Santiago, Chile

Registered: 2010-04-13

Posts: 10

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

The same problem with a ATI FireGL 5200 (32-bit)
Downgrade fixes the problem.

drcouzelis

Member

From: Connecticut, USA

Registered: 2009-11-09

Posts: 4,092

Website

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Same problem, rocking the old-school Radeon X850, x86_64.

drrossum

Member

From: Chicago

Registered: 2009-02-24

Posts: 83

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Same problem on r300 i686.

Also, X screws up the console.  When I leave X I get a blank screen.  It's not xf86-video-ati that causes this, because after downgrading to 6.14.3 this problem persists...

Last edited by drrossum (2012-03-30 03:11:22)

---

x-selection paste with keyboard in addition to center mouse button

tokoro

Member

From: Mexico City

Registered: 2011-11-30

Posts: 51

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Same problem with HD 6870

---

Non native English speaker [in, on, at are the same to me]

mankand007

Member

From: Chennai, India

Registered: 2012-02-26

Posts: 43

Website

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Same problem with ATI RS780L [Radeon HD 3000].

Downgrade fixed it.

---

Custom built Openbox Arch linux 64

blog:
http://manikandan.means.it

Ffunk

Member

From: Russia, Chelyabinsk

Registered: 2012-03-30

Posts: 1

Website

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Same problem. i686, ATI RS880M [Mobility Radeon HD 4200 Series]. 6.14.3-2 works fine.

siot

Member

Registered: 2009-11-10

Posts: 27

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Same with HD3200, with and without xorg.conf file.

gracerain

Member

Registered: 2011-10-28

Posts: 2

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Same problem with HD 4570, I just couldn't log into the gui environment and downgrading the xf86-video-ati fix it

blog

http://program.sinaapp.com

mayoS

Member

Registered: 2012-03-30

Posts: 1

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Same with Radeon HD 3650.

Solved by using xf86-video-ati-git from AUR.

mjb

Member

From: Germany

Registered: 2012-01-28

Posts: 68

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Confirmed with ATI Radeon Xpress 7930. Downgrading fixes it.

Padfoot

Member

Registered: 2010-09-03

Posts: 381

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

I do not have an issue with X starting. Boot all works perfectly.

As soon as I switch ftom vt7 to vt1-6, X is killed. If I pkill X, X refuses to re-start.

extract from xorg log

[    38.416] (++) using VT number 7

[    38.416] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[    38.416] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    38.416] (II) [KMS] Kernel modesetting enabled.
[    38.417] (II) RADEON(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    38.417] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    38.417] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    38.417] (==) RADEON(0): Default visual is TrueColor
[    38.417] (==) RADEON(0): RGB weight 888
[    38.417] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    38.417] (--) RADEON(0): Chipset: "AMD Radeon HD 6200 Series Graphics" (ChipID = 0x9807)
[    38.417] (II) RADEON(0): PCIE card detected
[    38.417] drmOpenDevice: node name is /dev/dri/card0
[    38.417] drmOpenDevice: open result is 11, (OK)
[    38.417] drmOpenByBusid: Searching for BusID pci:0000:00:01.0
[    38.417] drmOpenDevice: node name is /dev/dri/card0
[    38.417] drmOpenDevice: open result is 11, (OK)
[    38.417] drmOpenByBusid: drmOpenMinor returns 11
[    38.418] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[    38.418] drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
[    38.418] (EE) RADEON(0): [drm] failed to set drm interface version.
[    38.418] (EE) RADEON(0): Kernel modesetting setup failed
[    38.418] (II) UnloadModule: "radeon"
[    38.418] (II) Unloading radeon
[    38.418] (EE) Screen(s) found, but none have a usable configuration.
[    38.418] 
Fatal server error:
[    38.418] no screens found
[    38.418] 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    38.418] Please also check the log file at "/var/log/Xorg.4.log" for additional information.
[    38.418] 
[    38.429] Server terminated with error (1). Closing log file.

digitalone

Member

Registered: 2011-08-19

Posts: 350

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Same problem with my Radeon HD 4650. Fixed with downgrading but I still see these lines while booting:

Fri Mar 30 10:26:25 2012: Found hardware: "HDA-Intel" "Realtek ALC272" "HDA:10ec0272,1179ff82,00100001" "0x1179" "0xff00"
Fri Mar 30 10:26:25 2012: Hardware is initialized using a generic method
Fri Mar 30 10:26:25 2012: Found hardware: "HDA-Intel" "ATI R6xx HDMI" "HDA:1002aa01,00aa0100,00100100" "0x1179" "0xff80"
Fri Mar 30 10:26:25 2012: Hardware is initialized using a generic method

What does that mean?

jancici

Member

From: svk

Registered: 2011-12-04

Posts: 192

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

I am getting this error on my laptop with HD3400

[     7.546] drmOpenDevice: node name is /dev/dri/card0
[     7.546] drmOpenDevice: open result is 8, (OK)
[     7.546] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[     7.546] drmOpenDevice: node name is /dev/dri/card0
[     7.546] drmOpenDevice: open result is 8, (OK)
[     7.546] drmOpenByBusid: drmOpenMinor returns 8
[     7.546] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[     7.546] (EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
[dri] This chipset requires a kernel module version of 1.17.0,
[dri] but the kernel reports a version of 2.12.0.[dri] Make sure your module is loaded prior to starting X, and
[dri] that this driver was built with support for KMS.
[dri] Aborting.

please, how to downgrade the package?
thanks

did someone fire the bug? is anybody solwing this problem?
thanks

Last edited by jancici (2012-03-30 08:45:46)

Stunts

Member

From: Portugal

Registered: 2009-03-28

Posts: 339

Website

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

I can't even get to X on my laptop with xf86-video-ati-6.14.4-1.
Downgrading solves the problem.
Here's my Xorg.log (the relevant part).

[     7.957] (EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
[dri] This chipset requires a kernel module version of 1.17.0,
[dri] but the kernel reports a version of 2.12.0.[dri] Make sure your module is loaded prior to starting X, and
[dri] that this driver was built with support for KMS.
[dri] Aborting.
[     7.957] (II) RADEON(0): RADEONFreeScreen
[     7.957] (II) UnloadModule: "radeon"
[     7.957] (II) UnloadSubModule: "int10"
[     7.957] (II) Unloading int10
[     7.957] (II) UnloadSubModule: "vgahw"
[     7.957] (II) Unloading vgahw
[     7.957] (EE) Screen(s) found, but none have a usable configuration.
[     7.957] 
Fatal server error:
[     7.957] no screens found
[     7.957] 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[     7.957] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[     7.957] 
[     7.965] Server terminated with error (1). Closing log file.

Edit: Forgot to mention: Using a Mobility Radeon HD 3650.

Last edited by Stunts (2012-03-30 09:16:43)

Styx85

Member

From: Hamburg/Germany

Registered: 2012-03-30

Posts: 3

Website

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Same here. GUI (gnome-shell) not working with latest xf86-video-ati and Radeon HD 5450.

Solved by switching to xf86-video-ati-git from AUR.

.:B:.

Forum Fellow

Registered: 2006-11-26

Posts: 5,819

Website

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Unless someone files a bug gentlemen this problem is unlikely to get fixed soon .

Edit: typo fixed for posterity >_>

Last edited by .:B:. (2012-03-30 16:30:00)

---

Got Leenucks? :: Arch: Power in simplicity :: Get Counted! Registered Linux User #392717 :: Blog thingy

centos

Member

From: Ostrava, Czech Republic

Registered: 2009-01-09

Posts: 65

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Confirmed for X1250 and HD2600. Solved by installing git version.

SneakySnake

Member

Registered: 2012-03-30

Posts: 21

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Same with Radeon X1550.

Stunts

Member

From: Portugal

Registered: 2009-03-28

Posts: 339

Website

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

The bug is filed here:
https://bugs.archlinux.org/task/29178

Edit: Workarounds too.

Last edited by Stunts (2012-03-30 09:38:14)

Lord David

Member

Registered: 2012-03-30

Posts: 2

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

same with Radeon HD 4290

digitalone

Member

Registered: 2011-08-19

Posts: 350

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Unless someone files a big gentlemen this problem is unlikely to get fixed soon .

Why?

drcouzelis

Member

From: Connecticut, USA

Registered: 2009-11-09

Posts: 4,092

Website

Re: xf86-video-ati-6.14.4-1-x86_64 doesn't work (SOLVED in 6.14.4-2)

Thank you for the link to the bug report. It was correct, simply using the ABS to build and install the xf86-video-ati package myself fixes the problem.

Unless someone files a big gentlemen this problem is unlikely to get fixed soon.

I understand what you mean, but... file a big... gentlemen? O_o