You are not logged in.

#1 2012-04-25 18:30:35

runa
Member
Registered: 2012-02-19
Posts: 8

which tiling wm

Hi everybody, i am about to embark in writing my phd thesis and i want some wm which efficient, without distractions and to some extent plesant looking. Hence i thought: tiling. I am pretty new to tiling wm. I read about some and my two choices seem to fall under dwm and xmonad.  Using some existent configurations from the forum i got both good looking and functional. Everybody says that xmonad has more features (without saying which) and some downsides because of the ghc etc and dwm is simpler... Now my question is : what do i miss from xmonad if i use dwm and vice versa. This is not meant to be something like emacs vs vim but  informative.

Offline

#2 2012-04-25 18:50:12

examon
Member
Registered: 2011-05-07
Posts: 208

Re: which tiling wm

I suggest Awesome WM if you are new to "tiling world". It's dynamic WM (you can switch from tiling mode to floating one the fly, which can be sometimes handy). It has also build in stuff like application menu, systray & kinda good panel. You will need to patch some of this features into DWM.... *but* if you are experienced user you can really go for DWM and patch it as you like, same with xmonad. Just try them all and you will see what works better for you.

Offline

#3 2012-04-25 18:55:51

wolfcore
Member
From: California
Registered: 2012-03-06
Posts: 137

Re: which tiling wm

I would recommend dwm, but really it is just a matter of preference.

Offline

#4 2012-04-25 19:04:08

ivoarch
Member
Registered: 2011-03-31
Posts: 436

Re: which tiling wm

Dwm rock!
Monsterwm rock!
Snapwm rock!


I love GnuEmacs, GnuScreen, ratpoison, and conkeror.
Github )||( Weblog

Offline

#5 2012-04-25 19:07:59

kcirick
Member
Registered: 2010-06-21
Posts: 364

Re: which tiling wm

My vote goes to dwm, just don't start messing around with the configurations. The default config is good enough (except maybe for key bindings)

Offline

#6 2012-04-25 19:10:33

Sara
Member
From: USA
Registered: 2009-07-09
Posts: 221

Re: which tiling wm

I've used both XMonad and dwm, so perhaps I can answer your question. XMonad gives a lot of customizability (via extensions), but so does dwm, through the patching process. To me, it's pretty much equivalent, though I've found patching dwm to be more time consuming, as I'm not a coder, but very rewarding. In the end, I chose dwm because I wanted a clickable task bar for my tablet, and didn't want to use dzen.

So, in short, you lose almost nothing whichever one you choose, except time, and as you plan to be writing a PhD thesis, I would recommend XMonad unless your customization needs are minor (in which case, choose either).

I'm not sure if this thread belongs to the Community Contributions. It seems to be more of a GNU/Linux topic to me.

Last edited by Sara (2012-04-25 19:15:09)


Registed Linux User 483618

Offline

#7 2012-04-25 19:12:09

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: which tiling wm

Please read the wiki and make up your own mind - everyone will have an opinion, you will be using the machine.

Also, how is this a community contribution - it looks more to me like a TGN...


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#8 2012-04-25 19:32:20

ANOKNUSA
Member
Registered: 2010-10-22
Posts: 2,141

Re: which tiling wm

jasonwryan's suggestion is the one to go with.  Every one of these WMs has its own feature set and ways of doing things, from preset layouts to extensible layouts to grouping and tabbing to completely manual placement, and they all handle things like system notifications and statusbars differently. Having just set up, like, the sixth of these WMs that I've tried so far, here's my blind speculation: they all share a lot of features, while having a few that are unique to themselves.  This is likely because, as different people try them, coders who feel something's missing or might be done differently will either fork or clone their favorite project.  The only way to ever know what works for you is to play around with different WMs or write one yourself.

Offline

#9 2012-04-25 21:13:26

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 20,727

Re: which tiling wm

Moved to Desktop Environments. 

Runa,
Welcome to Arch Linux.  Somehow, I think this may not have been the first thread on this topic....  smile
Please be sure to search for existing threads before starting a new one.

Thanks.


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way

Offline

#10 2012-04-25 21:30:58

FreeTheBee
Member
Registered: 2011-01-02
Posts: 125

Re: which tiling wm

runa wrote:

Hi everybody, i am about to embark in writing my phd thesis and i want some wm which efficient, without distractions and to some extent plesant looking. Hence i thought: tiling. I am pretty new to tiling wm. ...

Isn't the decision to start looking for a different WM the first sign of procrastination? wink

I'm in the same boat and use Awesome WM. I think it is great and pleasant looking, but distracted I get anyway, like now writing this post instead of my thesis wink

Offline

#11 2012-04-25 21:36:09

/dev/zero
Member
From: Melbourne, Australia
Registered: 2011-10-20
Posts: 1,247

Re: which tiling wm

In addition to the suggestion to STFW, I'll add that it's a matter of simplicity to try different WMs to see for yourself. So DSFR - this is what a PhD is about, right? ;-)

Also, your requirements (efficiency, non-distractingness, good-lookingness) seem ill-defined (and possibly contradictory). If you define these terms a bit better, you'll be in a better position to seek out the optimal wm.

A factor which is important but which you didn't mention is what method the wm uses for configuration. For example, xmonad is apparently a lovely wm for anyone who is willing to install and learn haskell. These two requirements, installing and learning haskell, are not necessarily trivial. So you need to consider what methods of configuration you already know, which methods you'd like to know, and which methods you'd rather not waste your time on.

Offline

#12 2012-04-25 21:59:15

bohoomil
Banned
Registered: 2010-09-04
Posts: 2,377
Website

Re: which tiling wm

runa wrote:

what do i miss from xmonad if i use dwm and vice versa

Nothing. If you are happy using a typewriter, you do not need a computer. If you do not find some feature missing in dwm, you do not need Xmonad. If you do not miss anything, and you are still unhappy with what you have, well, that is essentially not an IT related problem...


:: Registered Linux User No. 223384

:: github
:: infinality-bundle+fonts: good looking fonts made easy

Offline

#13 2012-04-25 23:27:19

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,557
Website

Re: which tiling wm

I've recently switched from Xmonad to dwm.  They are both great, and provide a very similar user experience once customized.

The one thing I miss from Xmonad (and I'm still trying to make this work in dwm) is having non-focused windows hidden in fullscreen/monocle mode.  I like compositing for transparent terminals.  In Xmonad I could have several urxvtc windows open and a web browser, and when I went to fullscreen/max mode I would only see one terminal.  In dwm I get a mess of all the transparent terminals layered on top of one another.  As I've never been happy with the redraw-lag of pseudo transparency in urxvt, this is a minor issue that still nags at me daily.

But in the end I am using dwm.


"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#14 2012-04-26 04:42:56

Yurlungur
Member
From: USA
Registered: 2012-01-06
Posts: 116

Re: which tiling wm

I just switched from a stacking WM to Xmonad and I'm super happy with it. I have everything in XMonad that I did in Enlightenment WM except for a shutdown menu. I now shutdown/suspend/hibernate using shell commands.

One warning about distractions, though. I've found myself spending MUCH more time tinkering with my configuration of Xmonad, which is super extensible thanks to Haskell. The end result has been that I've been less productive, not more. If you're a tinkerer like me, you might have similar issues. I think you'll have the same problem with Awesome, which is extendable in Lua. It's a lie that you need to learn Haskell or Lua to configure your WM, though (I think its more fun to learn, but its not necessary). Just copy other people's config files and you'll be fine.

If you want something plug and play, you might try Bluetile, which is basically Xmonad running inside a fork of Gnome 2. It's plug and play and has everything Gnome 2 did plus tiling.
https://wiki.archlinux.org/index.php/Bluetile

Last edited by Yurlungur (2012-04-26 04:46:54)


Lenovo Thinkpad T420; Intel sandy bridge i7 2.7GHz; integrated graphics card; 4GB RAM; wifi; Arch; Xmonad WM

Offline

#15 2012-04-26 17:12:40

runa
Member
Registered: 2012-02-19
Posts: 8

Re: which tiling wm

Thanks everybody for the useful suggestions. i did copy some of the great configurations I found on the site. For the moment i use dwm and I am happy with it!

Offline

Board footer

Powered by FluxBB