You are not logged in.

#1 2012-03-21 23:22:24

ismaelvc
Member
From: México, D.F.
Registered: 2012-02-26
Posts: 136

Problem with flickering cursor.

I just finished installing arch a few minutes ago, after much trouble, and I have a problem with mi mouse cursor that flickers when it is moving, this problem persists in every distro I have installed in this PC (including opensuse and archbang with kde) I haven't found useful info on this issue in the web, just very outdated suggestions,  that may be unrelated

Linux arch-linux 3.2.11-1-ARCH #1 SMP PREEMPT Thu Mar 15 09:16:03 UTC 2012 i686 AMD Athlon(tm) XP 2000+ AuthenticAMD GNU/Linux

Has anyone had this problem before?

'll keep looking for the answer but searching in google hasn't helped yet, I appreciate any help you can give!

Last edited by ismaelvc (2012-06-21 06:18:00)


Laptop: LG LM70 Express                                                  Kernel: 3.14.2-1-ARCH   
CPU: Intel Pentium M processor @1.86GHz                  Hard Drive: 80G
Video: Mobility Radeon X600                                            X Driver: xf86-video-ati
Memory Size: 1.5G + zramswap: 384M + swap: 3G

Offline

#2 2012-06-21 05:50:29

ismaelvc
Member
From: México, D.F.
Registered: 2012-02-26
Posts: 136

Re: Problem with flickering cursor.

Im reviving this post because I still get this problem but on another computer:


CPU Processor 0: mobile AMD Duron(tm) 1100MHz 64 KB Cache
Sound: VT82C686 AC97 Audio Controller module: snd-snd_via82xx
Video: Rage Mobility P/M AGP 2x server: Xorg (ati) 

the standard X cusrsor works fine, but not the other themes, I have installed mach64drm I'll see how it goes, I was thinking in changing HWcursor to yes in xorg.conf, as I red in some forums, but the file is depreciated, should I add this option in 10-evdev.conf?

thanks in advance!

EDIT: here is where I found more info

http://www.x.org/archive/X11R6.8.0/doc/ati5.html

wich options would you recommend? I'm trying them all but I don't know if they will have any effect in the 10-evdev.conf file, or even if they will have an unproductive effect, thanks!

I have installed xf86-video-ati, xf86-video-mach64, ati-dri, mesa, libglapi, libegl and libgl

recently mach64-dri lost support I don't know if it has something to do with this, also I have installed mach64drm from aur.

EDIT2: I will try this:

http://forums.fedoraforum.org/showthread.php?t=201482

Ok now i get 10-evdev.conf has nothing to do with it, sorry.

Last edited by ismaelvc (2012-06-21 06:20:22)


Laptop: LG LM70 Express                                                  Kernel: 3.14.2-1-ARCH   
CPU: Intel Pentium M processor @1.86GHz                  Hard Drive: 80G
Video: Mobility Radeon X600                                            X Driver: xf86-video-ati
Memory Size: 1.5G + zramswap: 384M + swap: 3G

Offline

#3 2012-06-21 08:34:23

DSpider
Member
From: Romania
Registered: 2009-08-23
Posts: 2,273

Re: Problem with flickering cursor.

Yes. Try disabling the hardware cursor.

Section "Device"
    Identifier         "Device0"
    Driver             "something" (radeon, perhaps?)
    VendorName         "something"
    Option "HWCursor"  "off"
EndSection

https://wiki.archlinux.org/index.php/X1 … nformation

And it doesn't matter if it's from a full xorg.conf (/etc/xorg.conf, /etc/X11/xorg.conf) or some file from /etc/X11/xorg.conf.d/. Here. Personally I prefer the xorg.conf.d method, since "/etc/X11/xorg.conf.d/10-monitor.conf" is basically the only file I'm interested in.


"How to Succeed with Linux"

I have made a personal commitment not to reply in topics that start with a lowercase letter. Proper grammar and punctuation is a sign of respect, and if you do not show any, you will NOT receive any help (at least not from me).

Offline

#4 2012-06-21 19:54:52

ConnorBehan
Package Maintainer (PM)
From: Long Island NY
Registered: 2007-07-05
Posts: 1,359
Website

Re: Problem with flickering cursor.

I use the full xorg.conf file because, if you're using an old card, you'll probably have to tweak multiple sections. I would strongly recommend that you get DRI working again following these instructions. Was DRI working before? (Running "glxinfo | grep OpenGL" should not say gallium on softpipe). I'm not sure if the proper driver for that card is mach64 or r128, so I would've tried both.

DSpider has it right... HWCursor and SWCursor are device options. The other device options in the old manual you linked, don't look very useful. The ones I would set are "AGPMode" "2" and "EnablePageFlip" "true".


6EA3 F3F3 B908 2632 A9CB E931 D53A 0445 B47A 0DAB
Great things come in tar.xz packages.

Offline

#5 2012-06-21 23:51:06

ismaelvc
Member
From: México, D.F.
Registered: 2012-02-26
Posts: 136

Re: Problem with flickering cursor.

Thanks I'll try your all your suggestions, I will also rebuild the mach driver because it seems it has no dri support by default in arch:

https://aur.archlinux.org/packages.php?ID=17939

EDIT1:

I have made a 10-monitor.conf and it looks like this:

Section "Monitor"
    Identifier             "Monitor0"
EndSection

Section "Device"
    Identifier             "Device0"
    Driver                 "mach64" #Choose the driver used for this monitor
    Option                 "HWCursor"  "off"
    Option                 "AGPMode" "2"
    Option                 "EnablePageFlip" "true"
EndSection

Section "Screen"
    Identifier             "Screen0"  #Collapse Monitor and Device section to Screen section
    Device                 "Device0"
    Monitor                "Monitor0"
    DefaultDepth         16 #Choose the depth (16||24)
    SubSection           "Display"
        Depth               16
        Modes              "1024x768_75.00" #Choose the resolution
    EndSubSection
EndSection

Just about to test it, now.

Last edited by ismaelvc (2012-06-22 00:41:16)


Laptop: LG LM70 Express                                                  Kernel: 3.14.2-1-ARCH   
CPU: Intel Pentium M processor @1.86GHz                  Hard Drive: 80G
Video: Mobility Radeon X600                                            X Driver: xf86-video-ati
Memory Size: 1.5G + zramswap: 384M + swap: 3G

Offline

#6 2012-06-22 01:41:22

ismaelvc
Member
From: México, D.F.
Registered: 2012-02-26
Posts: 136

Re: Problem with flickering cursor.

I have tested the r128 driver and it doesn't work here:

this is the xorg log using mach64, ati and ati-dri, the same as stated in a post above, I have found this to be the only combination taht works:

http://pastebin.com/PNKLJGVP

The cursor is still flickering, don't know if the other options worked, I will post another log without 10-monitor.conf.

Just another question is there a way to have a bigger x cursor, I mean the default one, yes the ugly retro looking one, lol, even if its ugly it gets the jobe done, but I would like for it to be a little bigger at least, but my guess is that that is why there are the other cursors right?

I will keep trying building the driver with dri support enabled next, and see what happens, but I'm getting tired (my eyes hurt!) of either the flickering or the small default x cursor.

EDIT: Almost forgot

ismaelvc@toybox ~ $ glxinfo | grep OpenGL
bash: glxinfo: no se encontró la orden #command not found

Which package I'm missing? (Forget it, found: mesa-demos)

Last edited by ismaelvc (2012-06-22 01:52:39)


Laptop: LG LM70 Express                                                  Kernel: 3.14.2-1-ARCH   
CPU: Intel Pentium M processor @1.86GHz                  Hard Drive: 80G
Video: Mobility Radeon X600                                            X Driver: xf86-video-ati
Memory Size: 1.5G + zramswap: 384M + swap: 3G

Offline

#7 2012-06-22 01:58:12

ismaelvc
Member
From: México, D.F.
Registered: 2012-02-26
Posts: 136

Re: Problem with flickering cursor.

Nope I get this:

ismaelvc@toybox ~ $ glxinfo | grep OpenGL
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on softpipe
OpenGL version string: 3.0 Mesa 8.0.3
OpenGL shading language version string: 1.30
OpenGL extensions:

Dind't have the chance to test before the mach-dri removal, I installed this arch in Jun 17 13:46:52, had chakra on it before, with razor-qt, and did notice the mach64-dri removal from their repos, but I didn't know its meaning at the time. :S

Could you please tell me which pkgbuild version is the one I need?

https://projects.archlinux.org/svntogit … deo-mach64

I believe is this one, but Im not sure, and if so I need to build the mach-dri first, am I correct?

https://projects.archlinux.org/svntogit … 2bfc87f9d3

But how do I find now the pkgbuild?, this should be in aur.

Last edited by ismaelvc (2012-06-22 02:06:42)


Laptop: LG LM70 Express                                                  Kernel: 3.14.2-1-ARCH   
CPU: Intel Pentium M processor @1.86GHz                  Hard Drive: 80G
Video: Mobility Radeon X600                                            X Driver: xf86-video-ati
Memory Size: 1.5G + zramswap: 384M + swap: 3G

Offline

#8 2012-06-22 04:15:31

ConnorBehan
Package Maintainer (PM)
From: Long Island NY
Registered: 2007-07-05
Posts: 1,359
Website

Re: Problem with flickering cursor.

Don't use any specific PKGBUILD that Arch has used before. Take the most recent one and change "--disable-dri" to "--enable-dri".


6EA3 F3F3 B908 2632 A9CB E931 D53A 0445 B47A 0DAB
Great things come in tar.xz packages.

Offline

#9 2012-06-23 19:25:32

ismaelvc
Member
From: México, D.F.
Registered: 2012-02-26
Posts: 136

Re: Problem with flickering cursor.

I have build the package using latest abs PKGBUILD, edited it to enable dri, removed the old one and installed this one with pacman -U  but "glxinfo | grep OpenGL" still returns the same about gallium:

[ismaelvc@toybox ~]$ glxinfo | grep OpenGL
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on softpipe
OpenGL version string: 3.0 Mesa 8.0.3
OpenGL shading language version string: 1.30
OpenGL extensions:

Last edited by ismaelvc (2012-06-23 19:26:52)


Laptop: LG LM70 Express                                                  Kernel: 3.14.2-1-ARCH   
CPU: Intel Pentium M processor @1.86GHz                  Hard Drive: 80G
Video: Mobility Radeon X600                                            X Driver: xf86-video-ati
Memory Size: 1.5G + zramswap: 384M + swap: 3G

Offline

Board footer

Powered by FluxBB