Arch Linux

theClassicMan27

Member

From: /home/ty

Registered: 2012-06-26

Posts: 14

Website

Pm-suspend succeed, but can not wake up

Hi all,

I'm running Arch on my Asus F8sg laptop with nvidia 9300M G VGA card ,
I was put my laptop to S3 state by "sudo pm-suspend", its went to sleep very fast, but when i wake it up, there's no graphic, capsLock led just blink, then restart after about 1 minute.

Here my pm-suspend.log:

 Initial commandline parameters: 
Mon Jun 25 21:09:31 ICT 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux ty-pc 3.4.4-1-ARCH #1 SMP PREEMPT Sat Jun 23 10:53:18 CEST 2012 x86_64 GNU/Linux
Module                  Size  Used by
bnep                    8793  2 
rfcomm                 33627  4 
fuse                   68768  4 
btusb                  11764  0 
bluetooth             190551  22 bnep,btusb,rfcomm
uvcvideo               69437  0 
snd_hda_codec_si3054     3534  1 
snd_hda_codec_realtek    60377  1 
joydev                  9991  0 
videobuf2_vmalloc       2468  1 uvcvideo
videobuf2_memops        2246  1 videobuf2_vmalloc
videobuf2_core         20415  1 uvcvideo
videodev               93086  1 uvcvideo
media                  10213  2 uvcvideo,videodev
usb_storage            44792  0 
uas                     9285  0 
asus_laptop            18462  0 
nvidia              10832296  42 
r8169                  49354  0 
arc4                    1410  2 
iwl3945                54508  0 
iwlegacy               48746  1 iwl3945
firewire_ohci          31677  0 
tpm_tis                 9074  0 
tpm_infineon            7954  0 
intel_agp              10936  0 
firewire_core          51552  1 firewire_ohci
sdhci_pci              10833  0 
sdhci                  23854  1 sdhci_pci
iTCO_wdt               12813  0 
mac80211              395680  2 iwl3945,iwlegacy
snd_hda_intel          24053  3 
snd_hda_codec          94273  3 snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hda_intel
snd_hwdep               6300  1 snd_hda_codec
snd_pcm                74958  3 snd_hda_codec_si3054,snd_hda_codec,snd_hda_intel
snd_page_alloc          7217  2 snd_pcm,snd_hda_intel
snd_timer              18966  1 snd_pcm
snd                    58997  13 snd_hda_codec_realtek,snd_hda_codec_si3054,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
cfg80211              170074  3 iwl3945,iwlegacy,mac80211
acpi_cpufreq            5933  1 
r852                   10828  0 
sm_common               7514  1 r852
nand                   45646  2 r852,sm_common
nand_ecc                3572  1 nand
nand_ids                5745  1 nand
soundcore               5410  1 snd
mtd                    28701  2 nand,sm_common
mii                     4123  1 r8169
iTCO_vendor_support     1929  1 iTCO_wdt
crc_itu_t               1363  1 firewire_core
i2c_core               20369  2 nvidia,videodev
mmc_core               82070  2 sdhci,sdhci_pci
tpm                    13669  2 tpm_tis,tpm_infineon
mperf                   1267  1 acpi_cpufreq
intel_gtt              14047  1 intel_agp
r592                   12011  0 
processor              26567  3 acpi_cpufreq
input_polldev           2882  1 asus_laptop
ac                      2376  0 
button                  4502  0 
thermal                 7959  0 
video                  11307  0 
battery                 6517  0 
memstick                7016  1 r592
pcspkr                  1899  0 
serio_raw               4653  0 
sparse_keymap           3056  1 asus_laptop
psmouse                70792  0 
evdev                   9754  9 
microcode              12185  0 
coretemp                5654  0 
tpm_bios                5121  1 tpm
rfkill                 15604  5 cfg80211,asus_laptop,bluetooth
vboxnetflt             16871  0 
vboxnetadp             18387  0 
vboxdrv              1792406  2 vboxnetadp,vboxnetflt
ext4                  424175  2 
crc16                   1359  2 ext4,bluetooth
jbd2                   73919  1 ext4
mbcache                 5977  1 ext4
usbhid                 36430  0 
hid                    85285  1 usbhid
sd_mod                 29239  5 
sr_mod                 14823  0 
cdrom                  35648  1 sr_mod
ahci                   20549  4 
pata_acpi               3408  0 
ata_generic             3295  0 
libahci                20023  1 ahci
uhci_hcd               23404  0 
ata_piix               23160  0 
libata                167611  5 ahci,pata_acpi,libahci,ata_generic,ata_piix
scsi_mod              132942  5 uas,usb_storage,libata,sd_mod,sr_mod
ehci_hcd               41026  0 
usbcore               147565  8 uas,btusb,uhci_hcd,uvcvideo,usb_storage,ehci_hcd,usbhid
usb_common               954  1 usbcore
             total       used       free     shared    buffers     cached
Mem:       4053424    1468040    2585384          0     313148     685448
-/+ buffers/cache:     469444    3583980
Swap:      4194300          0    4194300

/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:

/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:

/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
Unloading kernel module ehci_hcd...Done.
Unloading kernel module ohci_hcd...Done.
Unloading kernel module uhci_hcd...Done.
Unloading kernel module iwl3945...Done.

/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:

/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:

/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
nVidia binary video drive detected, not using quirks.

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0

/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Mon Jun 25 21:09:34 ICT 2012: performing suspend
Mon Jun 25 21:20:49 ICT 2012: Awake.
Mon Jun 25 21:20:49 ICT 2012: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:

/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:

/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:

/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /etc/pm/sleep.d/90alsa resume suspend:
Playing raw data '/dev/zero' : Unsigned 8 bit, Rate 8000 Hz, Mono

/etc/pm/sleep.d/90alsa resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.

/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:

/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:

/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:

/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Mon Jun 25 21:20:51 ICT 2012: Finished. 

Please help!

Last edited by theClassicMan27 (2012-06-28 04:31:53)

theClassicMan27

Member

From: /home/ty

Registered: 2012-06-26

Posts: 14

Website

Re: Pm-suspend succeed, but can not wake up

Stuck,
any help?

Arpione

Member

From: Pécs, Hungary

Registered: 2010-09-13

Posts: 31

Re: Pm-suspend succeed, but can not wake up

If you have an nvidia card then try removing vga=... from the kernel parameters, or if you're using uvesafb then disable it (remove the v86d hook in /etc/mkinitcpio.conf).

laloch

Member

Registered: 2010-02-04

Posts: 186

Re: Pm-suspend succeed, but can not wake up

See this thread at nV News forum: http://www.nvnews.net/vbulletin/showthread.php?t=179956

theClassicMan27

Member

From: /home/ty

Registered: 2012-06-26

Posts: 14

Website

Re: Pm-suspend succeed, but can not wake up

Thanks for reply friends,

@Arpione
I have no vga=... kernel parameters but resume=...
Here's my kernel line in menu.lst: kernel /vmlinuz-linux root=/dev/sda3 ro resume=/dev/sda4
and i'm not using uvesafb, too.

@laloch
This thread has not marked as SOLVE yet,

May i'll wait for newer driver or go look for another solution?

Last edited by theClassicMan27 (2012-06-28 14:12:22)

laloch

Member

Registered: 2010-02-04

Posts: 186

Re: Pm-suspend succeed, but can not wake up

May i'll wait for newer driver or go look for another solution?

It depends on your needs. For me the lack of the suspend/resume functionality is an acceptable trade-off for monitor hotplug and RandR support. This is what Pierre-Loup Griffais says about this issue in the aforementioned nV News thread:

Our intention is to roll out the fixes for these critical issues as soon as possible in the upcoming 304 release series.

edit: btw, there is rather funny "solution" of the issue in the latest NVIDIA blob. You can see it in your /var/log/kernel.log

NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.

Last edited by laloch (2012-06-28 23:36:23)

theClassicMan27

Member

From: /home/ty

Registered: 2012-06-26

Posts: 14

Website

Re: Pm-suspend succeed, but can not wake up

LOL

PS: I was switch to Nouveau driver and anything... worked fine. But i like nVidia driver. Hope the new will fix this bugs.

Musikolo

Member

Registered: 2008-11-10

Posts: 35

Re: Pm-suspend succeed, but can not wake up

Hi guys,

I also have a very similar issue. The thing is that when I run pm-suspend, the system enters in S3 state (suspend to RAM) seamlessly. The problem is that when it wakes up, the screen gets blank. Since it receives no signal from the graphic card, after a few seconds, it turns off completely.  The funny thing is this problem has appeared all of a sudden. I have been using pm-suspend actively for several months, but somehow, a few days this problem came up.

I have checked in forums looking for a solution and done several tests (including unload nvidia driver, suspend the system from console and many other things) but everything unsuccessfully.

Here you have my pm-suspend.log file:

Initial commandline parameters: 
Fri Jul 27 21:46:46 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux Kalisto 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64 GNU/Linux
Module                  Size  Used by
ext4                  424175  1 
jbd2                   73919  1 ext4
mbcache                 5977  1 ext4
crc16                   1359  1 ext4
nvidia              10832264  0 
microcode              12185  0 
snd_hda_codec_hdmi     23672  4 
vboxdrv              1792406  0 
powernow_k8            13360  0 
serio_raw               4653  0 
psmouse                70792  0 
mperf                   1267  1 powernow_k8
processor              26567  1 powernow_k8
i2c_dev                 5873  0 
it87                   28829  0 
r8169                  49386  0 
wmi                     8475  0 
pcspkr                  1899  0 
mii                     4123  1 r8169
edac_mce_amd           12469  0 
edac_core              36656  0 
sp5100_tco              4504  0 
i2c_core               20369  2 i2c_dev,nvidia
k10temp                 2915  0 
hwmon_vid               3196  1 it87
button                  4502  0 
evdev                   9754  0 
snd_hda_codec_realtek    60409  1 
snd_hda_intel          24053  0 
snd_hda_codec          94305  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep               6300  1 snd_hda_codec
snd_pcm                74958  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc          7217  2 snd_pcm,snd_hda_intel
snd_timer              18966  1 snd_pcm
snd                    58997  7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore               5410  1 snd
reiserfs              240093  1 
sr_mod                 14823  0 
cdrom                  35648  1 sr_mod
sd_mod                 29239  4 
pata_jmicron            2480  0 
pata_atiixp             4000  0 
pata_acpi               3408  0 
ahci                   20549  4 
libahci                20023  1 ahci
ohci_hcd               21720  0 
xhci_hcd               81472  0 
ata_generic             3295  0 
libata                167611  6 ahci,pata_acpi,libahci,ata_generic,pata_atiixp,pata_jmicron
ehci_hcd               41026  0 
usbcore               147565  4 ohci_hcd,ehci_hcd,xhci_hcd
usb_common               954  1 usbcore
scsi_mod              132974  3 libata,sd_mod,sr_mod
             total       used       free     shared    buffers     cached
Mem:       4050560     174460    3876100          0       4212      32976
-/+ buffers/cache:     137272    3913288
Swap:      4192960          0    4192960

/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:

/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:

/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/50netcfg suspend suspend:

/usr/lib/pm-utils/sleep.d/50netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:

/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:

/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
nVidia binary video drive detected, not using quirks.

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0

/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Fri Jul 27 21:46:47 CEST 2012: performing suspend
Fri Jul 27 21:47:03 CEST 2012: Awake.
Fri Jul 27 21:47:03 CEST 2012: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:

/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:

/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:

/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /etc/pm/sleep.d/90alsa resume suspend:
Playing raw data '/dev/zero' : Unsigned 8 bit, Rate 8000 Hz, Mono

/etc/pm/sleep.d/90alsa resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.

/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/50netcfg resume suspend:

/usr/lib/pm-utils/sleep.d/50netcfg resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:

/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:

/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:

/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Fri Jul 27 21:47:06 CEST 2012: Finished.

...and here my pm-powersave.log file:

Running hook /usr/lib/pm-utils/power.d/hal-cd-polling false:

/usr/lib/pm-utils/power.d/hal-cd-polling false: success.
Running hook /usr/lib/pm-utils/power.d/intel-audio-powersave false:
Setting power savings for snd_hda_intel to 0...Done.

/usr/lib/pm-utils/power.d/intel-audio-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/journal-commit false:
Setting journal commit time for /home to 0...Done.

/usr/lib/pm-utils/power.d/journal-commit false: success.
Running hook /usr/lib/pm-utils/power.d/laptop-mode false:
Laptop mode disabled.

/usr/lib/pm-utils/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:
/usr/lib/pm-utils/power.d/pcie_aspm: line 9: echo: write error: Operation not permitted

/usr/lib/pm-utils/power.d/pcie_aspm false: success.
Running hook /usr/lib/pm-utils/power.d/readahead false:
Setting readahead for /dev/sda1 to 256...Done.
Setting readahead for /dev/sda3 to 256...Done.

/usr/lib/pm-utils/power.d/readahead false: success.
Running hook /usr/lib/pm-utils/power.d/sata_alpm false:
Setting SATA APLM on host0 to max_performance...Done.
Setting SATA APLM on host1 to max_performance...Done.
Setting SATA APLM on host10 to max_performance...Done.
Setting SATA APLM on host11 to max_performance...Done.
Setting SATA APLM on host12 to max_performance...Done.
Setting SATA APLM on host13 to max_performance...Done.
Setting SATA APLM on host14 to max_performance...Done.
Setting SATA APLM on host15 to max_performance...Done.
Setting SATA APLM on host16 to max_performance...Done.
Setting SATA APLM on host17 to max_performance...Done.
Setting SATA APLM on host2 to max_performance...Done.
Setting SATA APLM on host3 to max_performance...Done.
Setting SATA APLM on host4 to max_performance...Done.
Setting SATA APLM on host5 to max_performance...Done.
Setting SATA APLM on host8 to max_performance...Done.
Setting SATA APLM on host9 to max_performance...Done.

/usr/lib/pm-utils/power.d/sata_alpm false: success.
Running hook /usr/lib/pm-utils/power.d/sched-powersave false:
**sched policy powersave OFF

/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:

/usr/lib/pm-utils/power.d/wireless false: success.
Running hook /usr/lib/pm-utils/power.d/xfs_buffer false:

/usr/lib/pm-utils/power.d/xfs_buffer false: success.
Running hook /usr/lib/pm-utils/power.d/hal-cd-polling false:

/usr/lib/pm-utils/power.d/hal-cd-polling false: success.
Running hook /usr/lib/pm-utils/power.d/intel-audio-powersave false:
Setting power savings for snd_hda_intel to 0...Done.

/usr/lib/pm-utils/power.d/intel-audio-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/journal-commit false:
Setting journal commit time for /home to 0...Done.

/usr/lib/pm-utils/power.d/journal-commit false: success.
Running hook /usr/lib/pm-utils/power.d/laptop-mode false:
Laptop mode disabled.

/usr/lib/pm-utils/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:
/usr/lib/pm-utils/power.d/pcie_aspm: line 9: echo: write error: Operation not permitted

/usr/lib/pm-utils/power.d/pcie_aspm false: success.
Running hook /usr/lib/pm-utils/power.d/readahead false:
Setting readahead for /dev/sda1 to 256...Done.
Setting readahead for /dev/sda3 to 256...Done.

/usr/lib/pm-utils/power.d/readahead false: success.
Running hook /usr/lib/pm-utils/power.d/sata_alpm false:
Setting SATA APLM on host0 to max_performance...Done.
Setting SATA APLM on host1 to max_performance...Done.
Setting SATA APLM on host10 to max_performance...Done.
Setting SATA APLM on host11 to max_performance...Done.
Setting SATA APLM on host12 to max_performance...Done.
Setting SATA APLM on host13 to max_performance...Done.
Setting SATA APLM on host14 to max_performance...Done.
Setting SATA APLM on host15 to max_performance...Done.
Setting SATA APLM on host16 to max_performance...Done.
Setting SATA APLM on host17 to max_performance...Done.
Setting SATA APLM on host2 to max_performance...Done.
Setting SATA APLM on host3 to max_performance...Done.
Setting SATA APLM on host4 to max_performance...Done.
Setting SATA APLM on host5 to max_performance...Done.
Setting SATA APLM on host8 to max_performance...Done.
Setting SATA APLM on host9 to max_performance...Done.

/usr/lib/pm-utils/power.d/sata_alpm false: success.
Running hook /usr/lib/pm-utils/power.d/sched-powersave false:
**sched policy powersave OFF

/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:

/usr/lib/pm-utils/power.d/wireless false: success.
Running hook /usr/lib/pm-utils/power.d/xfs_buffer false:

/usr/lib/pm-utils/power.d/xfs_buffer false: success.
Running hook /usr/lib/pm-utils/power.d/hal-cd-polling false:

/usr/lib/pm-utils/power.d/hal-cd-polling false: success.
Running hook /usr/lib/pm-utils/power.d/intel-audio-powersave false:
Setting power savings for snd_hda_intel to 0...Done.

/usr/lib/pm-utils/power.d/intel-audio-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/journal-commit false:
Setting journal commit time for /home to 0...Done.

/usr/lib/pm-utils/power.d/journal-commit false: success.
Running hook /usr/lib/pm-utils/power.d/laptop-mode false:
Laptop mode disabled.

/usr/lib/pm-utils/power.d/laptop-mode false: success.
Running hook /usr/lib/pm-utils/power.d/pcie_aspm false:
/usr/lib/pm-utils/power.d/pcie_aspm: line 9: echo: write error: Operation not permitted

/usr/lib/pm-utils/power.d/pcie_aspm false: success.
Running hook /usr/lib/pm-utils/power.d/readahead false:
Setting readahead for /dev/sda1 to 256...Done.
Setting readahead for /dev/sda3 to 256...Done.

/usr/lib/pm-utils/power.d/readahead false: success.
Running hook /usr/lib/pm-utils/power.d/sata_alpm false:
Setting SATA APLM on host0 to max_performance...Done.
Setting SATA APLM on host1 to max_performance...Done.
Setting SATA APLM on host10 to max_performance...Done.
Setting SATA APLM on host11 to max_performance...Done.
Setting SATA APLM on host12 to max_performance...Done.
Setting SATA APLM on host13 to max_performance...Done.
Setting SATA APLM on host14 to max_performance...Done.
Setting SATA APLM on host15 to max_performance...Done.
Setting SATA APLM on host2 to max_performance...Done.
Setting SATA APLM on host3 to max_performance...Done.
Setting SATA APLM on host4 to max_performance...Done.
Setting SATA APLM on host5 to max_performance...Done.
Setting SATA APLM on host6 to max_performance...Done.
Setting SATA APLM on host7 to max_performance...Done.
Setting SATA APLM on host8 to max_performance...Done.
Setting SATA APLM on host9 to max_performance...Done.

/usr/lib/pm-utils/power.d/sata_alpm false: success.
Running hook /usr/lib/pm-utils/power.d/sched-powersave false:
**sched policy powersave OFF

/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:

/usr/lib/pm-utils/power.d/wireless false: success.
Running hook /usr/lib/pm-utils/power.d/xfs_buffer false:

/usr/lib/pm-utils/power.d/xfs_buffer false: success.

The thing is that I have recently had issues with my nvidia driver, because it detected two monitors: one connected to a KVI (VGA) and another connected to a DVI interface (the one using now). I got the right configuration to disable the VGA connection and it worked out.

Any idea about what might be happening?

Best regards.

EDIT1: The above issue is happening in my desktop PC, it's not a laptop.
EDIT2: I got it to work back again by downgrading to nvidia 2.9.5-2. Because of this, I had to downgrade linux to 3.4.5-1 and virtualbox-modules to 4.1.18-3. The nvidia drivers 302.17 have caused me a milliard of problems. So, I've decided not upgrade them again until the new release having the 304 version is out!

Last edited by Musikolo (2012-07-28 13:42:40)

Devastator

Member

From: Poland

Registered: 2008-05-27

Posts: 179

Re: Pm-suspend succeed, but can not wake up

I also had this issue on my Toshiba Satellite A500 (nVidia 230M). Installing nouveau helped.

I hope nvidia will fix it. Such a shame... ;-)

---

Some applications are WYSIWYG, and some are WYSIWTF.