You are not logged in.

#1 2012-06-30 09:51:32

89c51
Member
Registered: 2012-06-05
Posts: 741

CAD suggestion.

Could anyone suggest any usable 64bit cads. I wasn't impressed with qcad to be honest.

Also does FreeCAD worth the "trouble" installing it?

Thanks in advance.

Offline

#2 2012-06-30 11:39:22

mosquitogang201
Member
Registered: 2012-06-19
Posts: 37

Re: CAD suggestion.

It depends what you're looking to do. I have LibreCAD installed - this is a fork off QCAD so you may or may not like it. Draftsight is pretty much a drop-in replacement for AutoCAD. This is commercial software but you can get a free personal copy. If you are looking for 3D on the same level as Solidworks or Unigraphics, there are a couple commercial programs you can buy but you aren't going to find one for free. I have been following FreeCAD and the program is very promising and progressing quickly. They still have a lot of work to do though before it is as usable as and can replace something like Solidworks.

Last edited by mosquitogang201 (2012-06-30 11:40:28)

Offline

#3 2012-06-30 13:18:56

89c51
Member
Registered: 2012-06-05
Posts: 741

Re: CAD suggestion.

The only reason i am not installing draftsight is that i don't want to mess with multilib. VariCAD looks ok but 450 euros are kind of steep for my current financial situation.

I don't need something extremely complex.

Offline

#4 2012-07-12 19:49:32

89c51
Member
Registered: 2012-06-05
Posts: 741

Re: CAD suggestion.

Sorry for bumping but anyone here has any experience with VariCAD. Does it worth it??

Offline

#5 2012-07-14 00:07:18

JackH79
Member
From: Australia
Registered: 2009-06-18
Posts: 663
Website

Re: CAD suggestion.

Haven't tried VariCAD yet, but this might interest you:
It may not exactly fit your needs, especially as it is still relatively slow to work with and only offers the basic (2D only, but 3D soon to come) editing tools, but have a look at AutoCAD WS, which is free to use and works in your browser. No installation required.

Offline

#6 2012-07-14 00:40:56

progandy
Member
Registered: 2012-05-17
Posts: 5,322

Re: CAD suggestion.

89c51 wrote:

The only reason i am not installing draftsight is that i don't want to mess with multilib.

Why not? It adds a few 32bit libraries to your system, and /usr/lib32 will be added to the linker search path. but that's about it. Including multilib-gcc it amounts to 300MB on my system.


| alias CUTF='LANG=en_XX.UTF-8@POSIX ' | alias ENGLISH='LANG=C.UTF-8 ' |

Offline

#7 2012-07-14 03:49:59

OrionFyre
Member
Registered: 2008-03-16
Posts: 68

Re: CAD suggestion.

While this is in no way helpful, I too am sorely disapointed by the state of cad software in the FOSS world. I can kludge along in qcad and the others but nothing is as graceful and elegant as autodesk's solution.

Well that and the infuriating and maddening absence of TTT circles in any of the other software. Sure I can draw a few lines, do some bisecting and make my geometry teacher proud, and finally do a center based circle... but damn C[enter]TTT[enter] was just so much easier.

Offline

#8 2012-07-14 14:22:08

89c51
Member
Registered: 2012-06-05
Posts: 741

Re: CAD suggestion.

Thanks for the anwsers everybody.

JackH79 wrote:

Haven't tried VariCAD yet, but this might interest you:
It may not exactly fit your needs, especially as it is still relatively slow to work with and only offers the basic (2D only, but 3D soon to come) editing tools, but have a look at AutoCAD WS, which is free to use and works in your browser. No installation required.

Isn't this just to edit files??? I stumbled upon it while i was looking for any web based tools but i thought it was only to edit existing files.

OrionFyre wrote:

While this is in no way helpful, I too am sorely disapointed by the state of cad software in the FOSS world. I can kludge along in qcad and the others but nothing is as graceful and elegant as autodesk's solution.

I have to agree. CAD tools for linux are either tooooooo expensive (ie. Siemens NX) or not up on par with the commercial stuff even for simple 2d or not ready yet. And its sad because in most areas FOSS has excellent tools. As it seems it isn't an area of interest by those who know how to code.

Offline

#9 2012-07-14 22:50:41

JackH79
Member
From: Australia
Registered: 2009-06-18
Posts: 663
Website

Re: CAD suggestion.

89c51 wrote:

Isn't this just to edit files??? I stumbled upon it while i was looking for any web based tools but i thought it was only to edit existing files

True. But that's only their idea of how it's supposed to work. I simply created an empty .dwg file and use that to start a fresh drawing.
However, as I mentioned earlier, it's not yet suited for serious work, as it's quite slow and lacks advanced tools. But it's brilliant if you just use it occasionally to produce small and simple drawings.
Since we all agree that CAD software in the free world is nowhere near the quality and usability of AutoCAD et al., the WS version is a good alternative, if you know its limitations.
I put up a screenshot so that you can see what it looks like (taken on a Windows machine, but it looks the same on my Arch):
tZXF1dA

Last edited by JackH79 (2012-07-14 22:52:38)

Offline

#10 2012-07-15 17:58:58

nomorewindows
Member
Registered: 2010-04-03
Posts: 3,548

Re: CAD suggestion.

There is also blender, but it seems a little complicated to figure out.


I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.

Offline

#11 2012-07-16 18:08:09

drcouzelis
Member
From: Connecticut, USA
Registered: 2009-11-09
Posts: 4,092
Website

Re: CAD suggestion.

A friend once told me that whoever writes a good CAD program for Linux will be a millionare.

...That's all I know about Linux CAD software, and it didn't give me a good impression about it. hmm

Offline

Board footer

Powered by FluxBB