You are not logged in.
Pages: 1
Hello Archers!
Having a litle problem with trying to shutdown my arch installation.
I am convinced that the problem is acpi.
dmesg |grep ACPI gives me:
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
ACPI: RSDP (v000 VIA694 ) @ 0x000f80c0
ACPI: RSDT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI-0284: *** Error: Region SystemIO(1) has no handler
ACPI-0115: *** Error: acpi_load_tables: Could not load namespace: AE_NOT_EXIST
ACPI-0123: *** Error: acpi_load_tables: Could not load tables: AE_NOT_EXIST
ACPI: Unable to load the System Description Tables
ACPI: Subsystem revision 20050729
ACPI: Interpreter disabled.
pnp: PnP ACPI: disabled
My hardware and the bios settings seems to be ok,because an ubuntu installation that i have, is shuting down ok the system.
This is the output of: dmesg |grep ACPI in my ubuntu installation.
(if it helps... )
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
ACPI: RSDP (v000 VIA695 ) @ 0x000f80c0
ACPI: RSDT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 MSI ACPI 0x42302e
31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: setting ELCR to 0200 (from 0ea0)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 10 11 12 14 15)
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PCI: Using ACPI for IRQ routing
ACPI wakeup devices:
ACPI: (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
apm: overridden by ACPI.
I've searched in the forum and i've put the kernel option acpi=force.
This is my kernel line in menu.lst - grub :
kernel /boot/vmlinuz root=/dev/hda2 ro devfs=nomount acpi=force vga=0x318 splash=verbose,theme:darch console=tty1
With no ressault... I have installed also acpid, and the system is loading as a deamon in the start.. with a failure...
sudo /etc/rc.d/acpid restart
:: Stopping acpid [FAIL]
:: Starting acpid [BUSY] acpid: can't open /proc/acpi/event: No such file or directory
[FAIL]
Ps. Sorry For my bad English
Offline
do you have any NTFS partitions? if so, try not mounting them and see if shutdown succeeds then
Offline
Thanks for the reply phrakture
But, no ntfs partitions :cry:
Offline
Hrrmmm...
OK try adding "apm=off" to your kernel boot params
Offline
I've tryied with
kernel /boot/vmlinuz root=/dev/hda2 ro devfs=nomount apm=off acpi=force vga=0x318 splash=verbose,theme:darch console=tty1
and with
kernel /boot/vmlinuz root=/dev/hda2 ro devfs=nomount apm=off vga=0x318 splash=verbose,theme:darch console=tty1
Nothing :cry: :cry: :cry: :cry:
Offline
Well Problem SOLVED!!! 8) 8) 8) 8)
http://iphitus.loudas.com/archck.php
I applied the 2.6.13-archck5 patch and it worked!
Here is the output
dmesg |grep ACPI
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
ACPI: RSDP (v000 VIA694 ) @ 0x000f80c0
ACPI: RSDT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Looking for DSDT in initrd... not found.
ACPI: setting ELCR to 0200 (from 0ea0)
ACPI: bus type pci registered
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: Assume root bridge [_SB_.PCI0] bus is 0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 10 11 12 14 15)
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PCI: Using ACPI for IRQ routing
ACPI wakeup devices:
ACPI: (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:01:00.0 disabled
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
Thanks everybody
Offline
I have similar problem
dmesg | grep ACPI
ACPI: Unable to locate RSDP
ACPI: Subsystem revision 20050902
ACPI: Interpreter disabled.
pnp: PnP ACPI: disabled
Windows is shuting down PC, but not arch
Offline
i have same problem with Kernel 2.6.15.4-2.Arch isn't shuting down.
dmesg |grep ACPI
BIOS-e820: 000000003bfc0000 - 000000003bfce000 (ACPI data)
BIOS-e820: 000000003bfce000 - 000000003bff0000 (ACPI NVS)
ACPI: RSDP (v002 ACPIAM ) @ 0x000fb870
ACPI: XSDT (v001 A M I OEMXSDT 0x01000617 MSFT 0x00000097) @ 0x3bfc0100
ACPI: FADT (v003 A M I OEMFACP 0x01000617 MSFT 0x00000097) @ 0x3bfc0290
ACPI: MADT (v001 A M I OEMAPIC 0x01000617 MSFT 0x00000097) @ 0x3bfc0390
ACPI: MCFG (v001 A M I OEMMCFG 0x01000617 MSFT 0x00000097) @ 0x3bfc0400
ACPI: OEMB (v001 A M I AMI_OEM 0x01000617 MSFT 0x00000097) @ 0x3bfce040
ACPI: DSDT (v001 A0368 A0368001 0x00000001 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI-0311: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43035350
ACPI-0292: *** Error: Looking up [0x43035350] (NON-ASCII)
ACPI-0115: *** Error: acpi_load_tables: Could not load namespace: AE_BAD_CHARACTER
ACPI-0123: *** Error: acpi_load_tables: Could not load tables: AE_BAD_CHARACTER
ACPI: Unable to load the System Description Tables
ACPI: Subsystem revision 20050902
ACPI: Interpreter disabled.
pnp: PnP ACPI: disabled
My old MSİ RS482M2 all works fine..But my new one Asus A8N-VM CSM not wokring correctly..
Offline
Good on your for searching! But post in a new thread, this one is marked solved, and such will probably not get much attention.
iphitus
Offline
Pages: 1