Arch Linux

TheSaint

Member

From: my computer

Registered: 2007-08-19

Posts: 1,523

Canon M145 and CUPS 1.6.2- printer is not detected

Hello,

resuming from old installation,  I was trying to get my printer working as before. But CUPS doesn't find any printer connected on USB. Even

 lsusb
Bus 001 Device 003: ID 2001:3c19 D-Link Corp. DWA-125 Wireless N 150 Adapter(rev.A3) [Ralink RT5370]
Bus 001 Device 005: ID 04a9:172b Canon, Inc. MP140 ser
Bus 002 Device 002: ID 041e:4064 Creative Technology, Ltd 
Bus 003 Device 002: ID 15d9:0a4d Trust International B.V. Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

And looking in the log:

tail /var/log/messages.log
Aug 11 00:29:17 localhost dbus[397]: [system] Reloaded configuration
Aug 11 00:29:17 localhost dbus[397]: [system] Reloaded configuration
Aug 11 00:29:17 localhost dbus[397]: [system] Reloaded configuration
Aug 11 00:49:18 localhost -- MARK --
Aug 11 00:58:30 localhost kernel: [ 2730.396410] usb 1-4: new high-speed USB device number 5 using ehci_hcd
Aug 11 00:58:30 localhost kernel: [ 2730.535977] WARNING! power/level is deprecated; use power/control instead
Aug 11 00:58:30 localhost kernel: [ 2730.588928] usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04A9 pid 0x172B
Aug 11 00:58:30 localhost kernel: [ 2730.588950] usbcore: registered new interface driver usblp
Aug 11 00:58:33 localhost kernel: [ 2733.026828] usb 1-4: usbfs: interface 1 claimed by usblp while 'colord-sane' sets config #1
Aug 11 00:59:02 localhost dbus[397]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out

Even I tried to remove usblp module, the result doesn't change.
also

/usr/lib/cups/backend/usb 
DEBUG: list_devices
DEBUG: libusb_get_device_list=9
DEBUG2: Printer found with device ID: MFG:Canon;CMD:BJL,BJRaster3,BSCCe,PLI;SOJ:TXT01;MDL:MP140 series;CLS:PRINTER;DES:Canon MP140 series;VER:1.04;STA:10;HRI:ASI; Device URI: usb://Canon/MP140%20series?serial=F2597F&interface=1
direct usb://Canon/MP140%20series?serial=F2597F&interface=1 "Canon MP140 series" "Canon MP140 series" "MFG:Canon;CMD:BJL,BJRaster3,BSCCe,PLI;SOJ:TXT01;MDL:MP140 series;CLS:PRINTER;DES:Canon MP140 series;VER:1.04;STA:10;HRI:ASI;" ""

I can use the printer via Virtualbox and the scanner is working normally with xsane.

EDIT

Even downgrading to cups 1.50 doesn't solve. Also some changing on the permissions on /dev/usb/lp0

Last edited by TheSaint (2012-08-11 06:41:48)

---

do it good first, it will be faster than do it twice the saint