You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2012-08-13 21:53:33
- pjox
- Member
- Registered: 2012-08-13
- Posts: 17
[SOLVED]user@(none)
Hello.
First I have to admit that I was really irresponsible because i never merged the .pacnew files after updates, but today I decided that it was time to do it, so I used Meld with the script provided in the archwiki.
Everything ran Ok until I restarted, mpd stop working (it shows an error about it at boot but I haven't been able to read it), the ctr+v and ctr+c shortcuts stopped working, some programs like pidgin failed to start after xfce have loaded, and finally when I open the terminal it says "pedro@(none)".
After some research I found that I had to add fsck, usr and shutdown to the mkinitcpio.conf file. That actually solved the shortcut's problem, but the others remain the same...
So... What can I do to solve this? (yes, from now on I'm merging those .pacnew's just after I update the system).
Thanks in advance...
Last edited by pjox (2012-08-14 05:41:02)
Offline
#2 2012-08-13 21:58:51
- Trilby
- Inspector Parrot
- Registered: 2011-11-29
- Posts: 30,462
- Website
Re: [SOLVED]user@(none)
The "(none)" in the prompt would most likely be due to a missing or malformed /etc/hosts file.
The error at boot that you couldn't see can be found in /var/log, most likely in the boot log, or errors log.
The programs failing to start can be troubleshot by checking the xorg output and/or the Xorg logs in /var/log.
Last edited by Trilby (2012-08-13 21:59:53)
"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman
Offline
#3 2012-08-13 22:17:49
- pjox
- Member
- Registered: 2012-08-13
- Posts: 17
Re: [SOLVED]user@(none)
Here is the copy of the hosts file:
#
# /etc/hosts: static lookup table for host names
#
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost arch
::1 localhost.localdomain localhost
# End of fileAnd these are the logs
Aug 13 16:21:56 (none) dhcpcd[2143]: dhcpcd not running
Aug 13 16:22:02 (none) dhcpcd[2159]: dhcpcd not running
Aug 13 16:22:07 (none) dhcpcd[2167]: dhcpcd not running
Aug 13 16:22:07 (none) dhcpcd[2175]: dhcpcd not running
Aug 13 16:22:39 (none) dhcpcd[2256]: wlan0: sendmsg: Cannot assign requested address
Aug 13 16:23:34 (none) anacron[1014]: Can't find sendmail at /usr/sbin/sendmail, not mailing output
Aug 13 16:26:13 (none) kernel: [ 1664.244408] sd 4:0:0:0: [sdb] No Caching mode page present
Aug 13 16:26:13 (none) kernel: [ 1664.244418] sd 4:0:0:0: [sdb] Assuming drive cache: write through
Aug 13 16:26:13 (none) kernel: [ 1664.249144] sd 4:0:0:0: [sdb] No Caching mode page present
Aug 13 16:26:13 (none) kernel: [ 1664.249154] sd 4:0:0:0: [sdb] Assuming drive cache: write through
Aug 13 16:26:13 (none) kernel: [ 1664.265863] sd 4:0:0:0: [sdb] No Caching mode page present
Aug 13 16:26:13 (none) kernel: [ 1664.265873] sd 4:0:0:0: [sdb] Assuming drive cache: write through
Aug 13 16:33:47 (none) /usr/sbin/crond[393]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Aug 13 16:34:03 (none) dhcpcd[506]: dhcpcd not running
Aug 13 16:34:08 (none) dhcpcd[615]: dhcpcd not running
Aug 13 16:34:08 (none) dhcpcd[623]: dhcpcd not running
Aug 13 16:34:16 (none) pulseaudio[699]: [pulseaudio] pid.c: Daemon already running.
Aug 13 16:34:24 (none) dhcpcd[790]: wlan0: sendmsg: Cannot assign requested addressMon Aug 13 16:33:43 2012: :: Adjusting system time and setting kernel time zone [BUSY] [DONE]
Mon Aug 13 16:33:43 2012: :: Starting udev daemon [BUSY] [DONE]
Mon Aug 13 16:33:43 2012: :: Triggering udev uevents [BUSY] [DONE]
Mon Aug 13 16:33:43 2012: :: Loading user-specified modules [BUSY] [DONE]
Mon Aug 13 16:33:43 2012: :: Waiting for udev uevents to be processed [BUSY] [DONE]
Mon Aug 13 16:33:43 2012: :: Configuring virtual consoles [BUSY] %@ [DONE]
Mon Aug 13 16:33:43 2012: :: Bringing up loopback interface [BUSY] [DONE]
Mon Aug 13 16:33:43 2012: :: Checking filesystems [BUSY] /dev/sda1: clean, 29/26104 files, 23737/104388 blocks (check in 3 mounts)
Mon Aug 13 16:33:43 2012: /dev/sda4: clean, 266530/7733248 files, 16979979/30906624 blocks
Mon Aug 13 16:33:43 2012: [DONE]
Mon Aug 13 16:33:43 2012: :: Remounting root and API filesystems [BUSY] [DONE]
Mon Aug 13 16:33:43 2012: :: Mounting local filesystems [BUSY] [DONE]
Mon Aug 13 16:33:44 2012: :: Activating swap [BUSY] [DONE]
Mon Aug 13 16:33:44 2012: :: Initializing random seed [BUSY] [DONE]
Mon Aug 13 16:33:44 2012: :: Removing leftover files [BUSY] [/usr/lib/tmpfiles.d/mpd.conf:1] Unknown group 'mpd'.
Mon Aug 13 16:33:45 2012: [FAIL]
Mon Aug 13 16:33:45 2012: :: Setting hostname: (none) [BUSY] [DONE]
Mon Aug 13 16:33:45 2012: :: Saving dmesg log [BUSY] [DONE]
Mon Aug 13 16:33:45 2012: INIT: Entering runlevel: 3
Mon Aug 13 16:33:45 2012: :: Starting NTP Daemon [BUSY] [DONE]
Mon Aug 13 16:33:45 2012: :: Starting Syslog-NG [BUSY] [DONE]
Mon Aug 13 16:33:46 2012: :: Starting D-BUS system messagebus [BUSY] [DONE]
Mon Aug 13 16:33:47 2012: :: Starting crond daemon [BUSY] [DONE]
Mon Aug 13 16:33:47 2012: :: Starting Simple Login Manager [BUSY] [DONE]
Mon Aug 13 16:33:48 2012: :: Starting wicd [BKGD]
Mon Aug 13 16:33:48 2012: :: Starting cupsd [BKGD] [ 15.025]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 15.025]
X.Org X Server 1.12.3.901 (1.12.4 RC 1)
Release Date: 2012-08-03
[ 15.025] X Protocol Version 11, Revision 0
[ 15.025] Build Operating System: Linux 3.4.4-2-ARCH x86_64
[ 15.025] Current Operating System: Linux (none) 3.4.8-1-ARCH #1 SMP PREEMPT Thu Aug 9 21:21:22 CEST 2012 x86_64
[ 15.025] Kernel command line: root=/dev/disk/by-uuid/eccf6744-1f0c-4d39-a6c3-d5142c1d678f ro
[ 15.025] Build Date: 09 August 2012 10:04:44AM
[ 15.025]
[ 15.025] Current version of pixman: 0.26.2
[ 15.025] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.025] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.025] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 13 16:33:49 2012
[ 15.225] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15.304] (==) No Layout section. Using the first Screen section.
[ 15.304] (==) No screen section available. Using defaults.
[ 15.304] (**) |-->Screen "Default Screen Section" (0)
[ 15.304] (**) | |-->Monitor "<default monitor>"
[ 15.332] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 15.332] (==) Automatically adding devices
[ 15.332] (==) Automatically enabling devices
[ 15.449] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15.449] Entry deleted from font path.
[ 15.562] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15.562] Entry deleted from font path.
[ 15.562] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15.562] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/
[ 15.562] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.562] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15.562] (II) Loader magic: 0x7c8b00
[ 15.562] (II) Module ABI versions:
[ 15.562] X.Org ANSI C Emulation: 0.4
[ 15.562] X.Org Video Driver: 12.1
[ 15.562] X.Org XInput driver : 16.0
[ 15.562] X.Org Server Extension : 6.0
[ 15.564] (--) PCI:*(0:0:2:0) 8086:2a02:1028:0273 rev 12, Mem @ 0xf8000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 15.564] (--) PCI: (0:0:2:1) 8086:2a03:1028:0273 rev 12, Mem @ 0xf8100000/1048576
[ 15.564] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.564] (II) LoadModule: "extmod"
[ 15.828] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.856] (II) Module extmod: vendor="X.Org Foundation"
[ 15.856] compiled for 1.12.3.901, module version = 1.0.0
[ 15.856] Module class: X.Org Server Extension
[ 15.856] ABI class: X.Org Server Extension, version 6.0
[ 15.856] (II) Loading extension MIT-SCREEN-SAVER
[ 15.856] (II) Loading extension XFree86-VidModeExtension
[ 15.856] (II) Loading extension XFree86-DGA
[ 15.856] (II) Loading extension DPMS
[ 15.856] (II) Loading extension XVideo
[ 15.856] (II) Loading extension XVideo-MotionCompensation
[ 15.856] (II) Loading extension X-Resource
[ 15.856] (II) LoadModule: "dbe"
[ 15.856] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.870] (II) Module dbe: vendor="X.Org Foundation"
[ 15.870] compiled for 1.12.3.901, module version = 1.0.0
[ 15.870] Module class: X.Org Server Extension
[ 15.870] ABI class: X.Org Server Extension, version 6.0
[ 15.870] (II) Loading extension DOUBLE-BUFFER
[ 15.870] (II) LoadModule: "glx"
[ 15.870] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.953] (II) Module glx: vendor="X.Org Foundation"
[ 15.953] compiled for 1.12.3.901, module version = 1.0.0
[ 15.953] ABI class: X.Org Server Extension, version 6.0
[ 15.953] (==) AIGLX enabled
[ 15.965] (II) Loading extension GLX
[ 15.965] (II) LoadModule: "record"
[ 15.965] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 16.116] (II) Module record: vendor="X.Org Foundation"
[ 16.163] compiled for 1.12.3.901, module version = 1.13.0
[ 16.163] Module class: X.Org Server Extension
[ 16.163] ABI class: X.Org Server Extension, version 6.0
[ 16.163] (II) Loading extension RECORD
[ 16.163] (II) LoadModule: "dri"
[ 16.163] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 16.379] (II) Module dri: vendor="X.Org Foundation"
[ 16.379] compiled for 1.12.3.901, module version = 1.0.0
[ 16.379] ABI class: X.Org Server Extension, version 6.0
[ 16.379] (II) Loading extension XFree86-DRI
[ 16.379] (II) LoadModule: "dri2"
[ 16.379] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 16.427] (II) Module dri2: vendor="X.Org Foundation"
[ 16.427] compiled for 1.12.3.901, module version = 1.2.0
[ 16.427] ABI class: X.Org Server Extension, version 6.0
[ 16.427] (II) Loading extension DRI2
[ 16.427] (==) Matched intel as autoconfigured driver 0
[ 16.427] (==) Matched vesa as autoconfigured driver 1
[ 16.427] (==) Matched fbdev as autoconfigured driver 2
[ 16.427] (==) Assigned the driver to the xf86ConfigLayout
[ 16.427] (II) LoadModule: "intel"
[ 16.427] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 16.660] (II) Module intel: vendor="X.Org Foundation"
[ 16.660] compiled for 1.12.3, module version = 2.20.3
[ 16.660] Module class: X.Org Video Driver
[ 16.660] ABI class: X.Org Video Driver, version 12.0
[ 16.660] (II) LoadModule: "vesa"
[ 16.660] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 16.712] (II) Module vesa: vendor="X.Org Foundation"
[ 16.712] compiled for 1.12.3, module version = 2.3.2
[ 16.712] Module class: X.Org Video Driver
[ 16.712] ABI class: X.Org Video Driver, version 12.0
[ 16.712] (II) LoadModule: "fbdev"
[ 16.713] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 16.802] (II) Module fbdev: vendor="X.Org Foundation"
[ 16.802] compiled for 1.12.2, module version = 0.4.3
[ 16.802] Module class: X.Org Video Driver
[ 16.802] ABI class: X.Org Video Driver, version 12.0
[ 16.802] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2)
[ 16.802] (II) VESA: driver for VESA chipsets: vesa
[ 16.802] (II) FBDEV: driver for framebuffer: fbdev
[ 16.802] (++) using VT number 7
[ 16.808] (WW) Falling back to old probe method for vesa
[ 16.808] (WW) Falling back to old probe method for fbdev
[ 16.808] (II) Loading sub module "fbdevhw"
[ 16.808] (II) LoadModule: "fbdevhw"
[ 16.808] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 16.852] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 16.852] compiled for 1.12.3.901, module version = 0.0.2
[ 16.852] ABI class: X.Org Video Driver, version 12.1
[ 16.853] drmOpenDevice: node name is /dev/dri/card0
[ 16.853] drmOpenDevice: open result is 9, (OK)
[ 16.853] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 16.853] drmOpenDevice: node name is /dev/dri/card0
[ 16.853] drmOpenDevice: open result is 9, (OK)
[ 16.853] drmOpenByBusid: drmOpenMinor returns 9
[ 16.853] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 16.853] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 16.853] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 16.853] (==) intel(0): RGB weight 888
[ 16.853] (==) intel(0): Default visual is TrueColor
[ 16.853] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 16.853] (**) intel(0): Relaxed fencing enabled
[ 16.853] (**) intel(0): Wait on SwapBuffers? enabled
[ 16.853] (**) intel(0): Triple buffering? enabled
[ 16.853] (**) intel(0): Framebuffer tiled
[ 16.853] (**) intel(0): Pixmaps tiled
[ 16.853] (**) intel(0): 3D buffers tiled
[ 16.882] (**) intel(0): SwapBuffers wait enabled
[ 16.882] (==) intel(0): video overlay key set to 0x101fe
[ 16.883] (II) intel(0): Output LVDS1 has no monitor section
[ 16.884] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 16.903] (II) intel(0): Output VGA1 has no monitor section
[ 17.191] (II) intel(0): Output TV1 has no monitor section
[ 17.191] (II) intel(0): EDID for output LVDS1
[ 17.191] (II) intel(0): Manufacturer: SEC Model: 5441 Serial#: 0
[ 17.191] (II) intel(0): Year: 2008 Week: 0
[ 17.191] (II) intel(0): EDID Version: 1.3
[ 17.191] (II) intel(0): Digital Display Input
[ 17.191] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 17.191] (II) intel(0): Gamma: 2.20
[ 17.191] (II) intel(0): No DPMS capabilities specified
[ 17.191] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 17.191] (II) intel(0): First detailed timing is preferred mode
[ 17.191] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 17.191] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 17.191] (II) intel(0): Manufacturer's mask: 0
[ 17.191] (II) intel(0): Supported detailed timing:
[ 17.191] (II) intel(0): clock: 70.5 MHz Image Size: 331 x 207 mm
[ 17.191] (II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1410 h_border: 0
[ 17.191] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 834 v_border: 0
[ 17.191] (II) intel(0): Supported detailed timing:
[ 17.191] (II) intel(0): clock: 70.5 MHz Image Size: 331 x 207 mm
[ 17.191] (II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1410 h_border: 0
[ 17.191] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 834 v_border: 0
[ 17.191] (II) intel(0): J794C154AT
[ 17.191] (II) intel(0): Unknown vendor-specific block 0
[ 17.191] (II) intel(0): EDID (in hex):
[ 17.191] (II) intel(0): 00ffffffffffff004ca3415400000000
[ 17.191] (II) intel(0): 00120103902115780a87f594574f8c27
[ 17.191] (II) intel(0): 27505400000001010101010101010101
[ 17.191] (II) intel(0): 0101010101018f1b0082502022301030
[ 17.191] (II) intel(0): 13004bcf1000001a8f1b008250202230
[ 17.191] (II) intel(0): 103013004bcf1000001a000000fe004a
[ 17.191] (II) intel(0): 373934438031353441540a2000000000
[ 17.191] (II) intel(0): 00000000000000000001010a20200082
[ 17.191] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 17.191] (II) intel(0): Printing DDC gathered Modelines:
[ 17.191] (II) intel(0): Modeline "1280x800"x0.0 70.55 1280 1296 1344 1410 800 801 804 834 +hsync -vsync (50.0 kHz eP)
[ 17.191] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 17.191] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 17.191] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 17.191] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 17.191] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 17.191] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 17.191] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 17.191] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 17.191] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 17.191] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 17.191] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 17.191] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 17.191] (II) intel(0): Printing probed modes for output LVDS1
[ 17.191] (II) intel(0): Modeline "1280x800"x60.0 70.55 1280 1296 1344 1410 800 801 804 834 +hsync -vsync (50.0 kHz eP)
[ 17.191] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 17.191] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 17.191] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 17.191] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 17.210] (II) intel(0): EDID for output VGA1
[ 17.501] (II) intel(0): EDID for output TV1
[ 17.501] (II) intel(0): Output LVDS1 connected
[ 17.501] (II) intel(0): Output VGA1 disconnected
[ 17.501] (II) intel(0): Output TV1 disconnected
[ 17.501] (II) intel(0): Using exact sizes for initial modes
[ 17.501] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 17.501] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 17.501] (II) intel(0): Kernel page flipping support detected, enabling
[ 17.501] (**) intel(0): Display dimensions: (330, 210) mm
[ 17.501] (**) intel(0): DPI set to (98, 96)
[ 17.501] (II) Loading sub module "fb"
[ 17.501] (II) LoadModule: "fb"
[ 17.501] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 17.525] (II) Module fb: vendor="X.Org Foundation"
[ 17.525] compiled for 1.12.3.901, module version = 1.0.0
[ 17.525] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.525] (II) Loading sub module "dri2"
[ 17.525] (II) LoadModule: "dri2"
[ 17.525] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 17.525] (II) Module dri2: vendor="X.Org Foundation"
[ 17.525] compiled for 1.12.3.901, module version = 1.2.0
[ 17.525] ABI class: X.Org Server Extension, version 6.0
[ 17.525] (II) UnloadModule: "vesa"
[ 17.525] (II) Unloading vesa
[ 17.525] (II) UnloadModule: "fbdev"
[ 17.525] (II) Unloading fbdev
[ 17.525] (II) UnloadSubModule: "fbdevhw"
[ 17.525] (II) Unloading fbdevhw
[ 17.525] (==) Depth 24 pixmap format is 32 bpp
[ 17.525] (II) intel(0): [DRI2] Setup complete
[ 17.525] (II) intel(0): [DRI2] DRI driver: i965
[ 17.525] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 17.557] (II) UXA(0): Driver registered support for the following operations:
[ 17.557] (II) solid
[ 17.557] (II) copy
[ 17.557] (II) composite (RENDER acceleration)
[ 17.557] (II) put_image
[ 17.557] (II) get_image
[ 17.557] (==) intel(0): Backing store disabled
[ 17.557] (==) intel(0): Silken mouse enabled
[ 17.557] (II) intel(0): Initializing HW Cursor
[ 17.557] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 17.565] (==) intel(0): DPMS enabled
[ 17.565] (==) intel(0): Intel XvMC decoder enabled
[ 17.565] (II) intel(0): Set up textured video
[ 17.565] (II) intel(0): Set up overlay video
[ 17.565] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 17.565] (II) intel(0): direct rendering: DRI2 Enabled
[ 17.565] (==) intel(0): hotplug detection: "enabled"
[ 17.630] (--) RandR disabled
[ 17.630] (II) Initializing built-in extension Generic Event Extension
[ 17.630] (II) Initializing built-in extension SHAPE
[ 17.630] (II) Initializing built-in extension MIT-SHM
[ 17.630] (II) Initializing built-in extension XInputExtension
[ 17.630] (II) Initializing built-in extension XTEST
[ 17.630] (II) Initializing built-in extension BIG-REQUESTS
[ 17.630] (II) Initializing built-in extension SYNC
[ 17.630] (II) Initializing built-in extension XKEYBOARD
[ 17.630] (II) Initializing built-in extension XC-MISC
[ 17.630] (II) Initializing built-in extension SECURITY
[ 17.630] (II) Initializing built-in extension XINERAMA
[ 17.630] (II) Initializing built-in extension XFIXES
[ 17.630] (II) Initializing built-in extension RENDER
[ 17.630] (II) Initializing built-in extension RANDR
[ 17.630] (II) Initializing built-in extension COMPOSITE
[ 17.630] (II) Initializing built-in extension DAMAGE
[ 17.933] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 17.933] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 17.933] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 17.933] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 17.933] (II) AIGLX: Loaded and initialized i965
[ 17.933] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 17.934] (II) intel(0): Setting screen physical size to 338 x 211
[ 19.381] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 19.386] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.386] (II) LoadModule: "evdev"
[ 19.397] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.475] (II) Module evdev: vendor="X.Org Foundation"
[ 19.475] compiled for 1.12.3.901, module version = 2.7.3
[ 19.475] Module class: X.Org XInput Driver
[ 19.475] ABI class: X.Org XInput driver, version 16.0
[ 19.475] (II) Using input driver 'evdev' for 'Power Button'
[ 19.475] (**) Power Button: always reports core events
[ 19.475] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 19.475] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.475] (--) evdev: Power Button: Found keys
[ 19.475] (II) evdev: Power Button: Configuring as keyboard
[ 19.475] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 19.475] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 19.475] (**) Option "xkb_rules" "evdev"
[ 19.475] (**) Option "xkb_model" "evdev"
[ 19.475] (**) Option "xkb_layout" "us"
[ 19.502] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 19.502] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 19.502] (II) Using input driver 'evdev' for 'Video Bus'
[ 19.502] (**) Video Bus: always reports core events
[ 19.502] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 19.502] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 19.502] (--) evdev: Video Bus: Found keys
[ 19.502] (II) evdev: Video Bus: Configuring as keyboard
[ 19.502] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13/event13"
[ 19.503] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 19.503] (**) Option "xkb_rules" "evdev"
[ 19.503] (**) Option "xkb_model" "evdev"
[ 19.503] (**) Option "xkb_layout" "us"
[ 19.503] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 19.503] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.503] (II) Using input driver 'evdev' for 'Power Button'
[ 19.503] (**) Power Button: always reports core events
[ 19.503] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 19.503] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.503] (--) evdev: Power Button: Found keys
[ 19.503] (II) evdev: Power Button: Configuring as keyboard
[ 19.503] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 19.503] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 19.503] (**) Option "xkb_rules" "evdev"
[ 19.503] (**) Option "xkb_model" "evdev"
[ 19.503] (**) Option "xkb_layout" "us"
[ 19.504] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 19.504] (II) No input driver specified, ignoring this device.
[ 19.504] (II) This device may have been added with another device file.
[ 19.504] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 19.504] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 19.504] (II) Using input driver 'evdev' for 'Sleep Button'
[ 19.504] (**) Sleep Button: always reports core events
[ 19.504] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 19.504] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 19.504] (--) evdev: Sleep Button: Found keys
[ 19.504] (II) evdev: Sleep Button: Configuring as keyboard
[ 19.504] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[ 19.504] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 19.504] (**) Option "xkb_rules" "evdev"
[ 19.504] (**) Option "xkb_model" "evdev"
[ 19.504] (**) Option "xkb_layout" "us"
[ 19.505] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 19.505] (II) No input driver specified, ignoring this device.
[ 19.505] (II) This device may have been added with another device file.
[ 19.505] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 19.505] (II) No input driver specified, ignoring this device.
[ 19.505] (II) This device may have been added with another device file.
[ 19.505] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 19.505] (II) No input driver specified, ignoring this device.
[ 19.505] (II) This device may have been added with another device file.
[ 19.506] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event1)
[ 19.506] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 19.506] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
[ 19.506] (**) Genius Optical Mouse: always reports core events
[ 19.506] (**) evdev: Genius Optical Mouse: Device: "/dev/input/event1"
[ 19.506] (--) evdev: Genius Optical Mouse: Vendor 0x458 Product 0x3a
[ 19.506] (--) evdev: Genius Optical Mouse: Found 3 mouse buttons
[ 19.506] (--) evdev: Genius Optical Mouse: Found scroll wheel(s)
[ 19.506] (--) evdev: Genius Optical Mouse: Found relative axes
[ 19.506] (--) evdev: Genius Optical Mouse: Found x and y relative axes
[ 19.506] (II) evdev: Genius Optical Mouse: Configuring as mouse
[ 19.506] (II) evdev: Genius Optical Mouse: Adding scrollwheel support
[ 19.506] (**) evdev: Genius Optical Mouse: YAxisMapping: buttons 4 and 5
[ 19.506] (**) evdev: Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.506] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input1/event1"
[ 19.506] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE, id 10)
[ 19.506] (II) evdev: Genius Optical Mouse: initialized for relative axes.
[ 19.506] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
[ 19.506] (**) Genius Optical Mouse: (accel) acceleration profile 0
[ 19.506] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[ 19.506] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[ 19.507] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[ 19.507] (II) No input driver specified, ignoring this device.
[ 19.507] (II) This device may have been added with another device file.
[ 19.507] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 19.507] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.507] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 19.507] (**) AT Translated Set 2 keyboard: always reports core events
[ 19.507] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 19.507] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 19.507] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 19.507] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 19.507] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 19.507] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 19.507] (**) Option "xkb_rules" "evdev"
[ 19.507] (**) Option "xkb_model" "evdev"
[ 19.507] (**) Option "xkb_layout" "us"
[ 19.508] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event11)
[ 19.508] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 19.508] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[ 19.508] (**) PS/2 Mouse: always reports core events
[ 19.508] (**) evdev: PS/2 Mouse: Device: "/dev/input/event11"
[ 19.508] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[ 19.508] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[ 19.508] (--) evdev: PS/2 Mouse: Found relative axes
[ 19.508] (--) evdev: PS/2 Mouse: Found x and y relative axes
[ 19.508] (II) evdev: PS/2 Mouse: Configuring as mouse
[ 19.508] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 19.508] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.508] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 19.508] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 12)
[ 19.508] (II) evdev: PS/2 Mouse: initialized for relative axes.
[ 19.508] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 19.508] (**) PS/2 Mouse: (accel) acceleration profile 0
[ 19.508] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[ 19.508] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[ 19.508] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse1)
[ 19.508] (II) No input driver specified, ignoring this device.
[ 19.508] (II) This device may have been added with another device file.
[ 19.509] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event12)
[ 19.509] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 19.509] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 19.509] (II) LoadModule: "synaptics"
[ 19.573] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 19.622] (II) Module synaptics: vendor="X.Org Foundation"
[ 19.622] compiled for 1.12.2, module version = 1.6.2
[ 19.622] Module class: X.Org XInput Driver
[ 19.622] ABI class: X.Org XInput driver, version 16.0
[ 19.622] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 19.622] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 19.622] (**) Option "Device" "/dev/input/event12"
[ 19.668] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[ 19.668] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[ 19.668] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 19.668] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 19.668] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 19.668] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 19.668] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 19.668] (**) Option "TapButton1" "1"
[ 19.668] (**) Option "TapButton2" "2"
[ 19.668] (**) Option "TapButton3" "3"
[ 19.668] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 19.668] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 19.670] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
[ 19.670] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 13)
[ 19.670] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 19.670] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[ 19.670] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[ 19.670] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 19.670] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 19.670] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 19.670] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 19.670] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 19.670] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse2)
[ 19.671] (II) No input driver specified, ignoring this device.
[ 19.671] (II) This device may have been added with another device file.
[ 19.671] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 19.671] (II) No input driver specified, ignoring this device.
[ 19.671] (II) This device may have been added with another device file.
[ 19.671] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 19.671] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 19.671] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 19.671] (**) Dell WMI hotkeys: always reports core events
[ 19.671] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event7"
[ 19.671] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 19.671] (--) evdev: Dell WMI hotkeys: Found keys
[ 19.671] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 19.671] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 19.672] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[ 19.672] (**) Option "xkb_rules" "evdev"
[ 19.672] (**) Option "xkb_model" "evdev"
[ 19.672] (**) Option "xkb_layout" "us"
[ 44.389] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 44.489] (II) intel(0): Printing DDC gathered Modelines:
[ 44.489] (II) intel(0): Modeline "1280x800"x0.0 70.55 1280 1296 1344 1410 800 801 804 834 +hsync -vsync (50.0 kHz eP)Offline
#4 2012-08-13 22:57:28
- Allan
- Pacman
- From: Brisbane, AU
- Registered: 2007-06-09
- Posts: 11,672
- Website
Re: [SOLVED]user@(none)
/etc/hostname (or old style, HOSTNAME in rc.conf)
Offline
#5 2012-08-14 02:20:31
- pjox
- Member
- Registered: 2012-08-13
- Posts: 17
Re: [SOLVED]user@(none)
Allan wrote:
/etc/hostname (or old style, HOSTNAME in rc.conf).
No... I have the last version of the rc.conf
#
# /etc/rc.conf - configuration file for initscripts
#
# Most of rc.conf has been replaced by various other configuration
# files. See archlinux(7) for details.
#
# For more details on rc.conf see rc.conf(5).
#
DAEMONS=(ntpd syslog-ng dbus crond slim @wicd @cupsd)
# Storage
#
# USEDMRAID="no"
# USELVM="no"
# Network
#
# interface=
# address=
# netmask=
# gateway=What does this mean?
Mon Aug 13 16:33:44 2012: :: Removing leftover files [BUSY] [/usr/lib/tmpfiles.d/mpd.conf:1] Unknown group 'mpd'.
Mon Aug 13 16:33:45 2012: [FAIL] Last edited by pjox (2012-08-14 02:21:01)
Offline
#6 2012-08-14 02:34:52
- WonderWoofy
- Member
- From: Los Gatos, CA
- Registered: 2012-05-19
- Posts: 8,414
Re: [SOLVED]user@(none)
Having been a Gentoo user for a short time, I came to really like the etc-update utility. There is a version in AUR that is made to work with Arch, I use it all the time (or whenever I need to rather). I really like how it allows you to interactively merge, in addition to simply replacing or discarding new config files.
Offline
#7 2012-08-14 02:55:30
- pjox
- Member
- Registered: 2012-08-13
- Posts: 17
Re: [SOLVED]user@(none)
Thanks WonderWoofy! I will consider using it in future time...
Does someone know which might be the problem?
Offline
#8 2012-08-14 03:03:15
- 2ManyDogs
- Forum Fellow
- Registered: 2012-01-15
- Posts: 4,648
Re: [SOLVED]user@(none)
pjox wrote:
Here is the copy of the hosts file:
#<ip-address> <hostname.domain.org> <hostname> 127.0.0.1 localhost.localdomain localhost arch
Is your hostname really "arch"?
What is in /etc/hostname?
cat /etc/hostnameLast edited by 2ManyDogs (2012-08-14 03:11:28)
Offline
#9 2012-08-14 03:49:52
- pjox
- Member
- Registered: 2012-08-13
- Posts: 17
Re: [SOLVED]user@(none)
2ManyDogs wrote:
Is your hostname really "arch"?
What is in /etc/hostname?
Yeah that is my hostname, or at least it was before I had this problem...
Here is the output:
[pedro@(none) ~]$ cat /etc/hostname
cat: /etc/hostname: No such file or directoryOffline
#10 2012-08-14 04:02:21
- pjox
- Member
- Registered: 2012-08-13
- Posts: 17
Re: [SOLVED]user@(none)
I've created the file "hostname" (I might erased it by mistake when I was merging the files...). That actually solved the "@(none)" problem 
, so thank you 2ManyDogs!
Any ideas on what could be the problem with mpd? especially with this error:
Mon Aug 13 16:33:44 2012: :: Removing leftover files [BUSY] [/usr/lib/tmpfiles.d/mpd.conf:1] Unknown group 'mpd'.
Mon Aug 13 16:33:45 2012: [FAIL] Offline
#11 2012-08-14 04:30:53
- Allan
- Pacman
- From: Brisbane, AU
- Registered: 2007-06-09
- Posts: 11,672
- Website
Re: [SOLVED]user@(none)
pjox wrote:
Allan wrote:/etc/hostname (or old style, HOSTNAME in rc.conf).
No... I have the last version of the rc.conf
My point was you needed one of those....
Offline
#12 2012-08-14 04:37:43
- pjox
- Member
- Registered: 2012-08-13
- Posts: 17
Re: [SOLVED]user@(none)
Allan wrote:
My point was you needed one of those....
Oh, Sorry Allan... Do you have any ideas on the mpd error I posted?
Offline
#13 2012-08-14 04:56:34
- Allan
- Pacman
- From: Brisbane, AU
- Registered: 2007-06-09
- Posts: 11,672
- Website
Re: [SOLVED]user@(none)
It looks like you need a group "mpd" on your system. I would have thought mpd would create that on install, but I don't use it to check.
Offline
#14 2012-08-14 05:39:22
- pjox
- Member
- Registered: 2012-08-13
- Posts: 17
Re: [SOLVED]user@(none)
Allan wrote:
It looks like you need a group "mpd" on your system. I would have thought mpd would create that on install, but I don't use it to check.
Thank you Allan, creating the group "mpd" solved the problem! I also had to make some changes to the mpd.conf, but now everything is running smoothly.
Offline
Pages: 1