You are not logged in.
- Topics: Active | Unanswered
#1 2012-09-05 14:56:50
- klios
- Member
- Registered: 2012-03-17
- Posts: 22
My laptop is consuming all battery and heating to much
Hi.. I'm running Archlinux on a HP Pavilion dv6 6154nr. Since I'd installed on it, it consumes around 25-30W and battery last like 1 hour, or and 1 hour and a half, when in Windows battery last like 2 hours or 3. CPU is heat like 64⁰C and im just running chromium with 5 tabs, without flash, and a terminal on Xmonad.
I have done every tutorial on archwiki, i have installed and configurated cpufrequtils, laptopmode, pm-utils, and it stills heating a lot.
sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +65.0°C (crit = +99.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +66.0°C (high = +86.0°C, crit = +100.0°C)
Core 0: +64.0°C (high = +86.0°C, crit = +100.0°C)
Core 1: +64.0°C (high = +86.0°C, crit = +100.0°C)
radeon-pci-0100
Adapter: PCI adapter
temp1: +50.5°C dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.3-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=b5eba921-eb79-4656-8705-c4a7370e9dff ro pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 acpi_osi=Linux acpi_backlight=vendor quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ce3efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ce3f000-0x000000009cebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/1656, BIOS F.1A 07/20/2011
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x15fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 09D000000 mask FFF000000 uncachable
[ 0.000000] 3 base 09E000000 mask FFE000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 140000000 mask FF0000000 write-back
[ 0.000000] 7 base 150000000 mask FF0000000 write-back
[ 0.000000] 8 base 15FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x9cffffff]
[ 0.000000] [mem 0x00000000-0x9cffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x9cffffff @ [mem 0x1fb14000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x15fdfffff]
[ 0.000000] [mem 0x100000000-0x15fdfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x15fdfffff @ [mem 0x9ce38000-0x9ce3efff]
[ 0.000000] RAMDISK: [mem 0x37a2a000-0x37d0cfff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000009cffe120 00094 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 000000009cfec000 0C553 (v01 HP INSYDE 00000000 MSFT 01000013)
[ 0.000000] ACPI: FACS 000000009cf6c000 00040
[ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 000000009cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009cfea000 0051F (v01 HP INSYDE 00001000 MSFT 01000013)
[ 0.000000] ACPI: BOOT 000000009cfe8000 00028 (v01 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASPT 000000009cfe5000 00034 (v07 HP INSYDE 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 000000009cfe4000 00780 (v01 HP INSYDE 00003000 INTL 20100806)
[ 0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP INSYDE 00003000 INTL 20100806)
[ 0.000000] ACPI: SSDT 000000009cfe2000 002DA (v01 HP INSYDE 00003000 INTL 20100806)
[ 0.000000] ACPI: SSDT 000000009cfe1000 0035D (v01 HP INSYDE 00003000 INTL 20100806)
[ 0.000000] ACPI: SSDT 000000009cfdb000 024A1 (v01 HP INSYDE 00001000 INTL 20100806)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000015fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x15fdfffff]
[ 0.000000] NODE_DATA [mem 0x15fdfc000-0x15fdfffff]
[ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015b400000-ffff88015f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x15fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x9ce3efff]
[ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] node 0: [mem 0x100000000-0x15fdfffff]
[ 0.000000] On node 0 totalpages: 1035213
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 622208 pages, LIFO batch:31
[ 0.000000] Normal zone: 6136 pages used for memmap
[ 0.000000] Normal zone: 386568 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009ce3f000 - 000000009cebf000
[ 0.000000] PM: Registered nosave memory: 000000009cebf000 - 000000009cfbf000
[ 0.000000] PM: Registered nosave memory: 000000009cfbf000 - 000000009cfff000
[ 0.000000] PM: Registered nosave memory: 000000009d000000 - 000000009fa00000
[ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88015fa00000 s83392 r8192 d23104 u262144
[ 0.000000] pcpu-alloc: s83392 r8192 d23104 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012687
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=b5eba921-eb79-4656-8705-c4a7370e9dff ro pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 acpi_osi=Linux acpi_backlight=vendor quiet
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3994188k/5765120k available (4635k kernel code, 1624268k absent, 146664k reserved, 4212k data, 756k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2294.789 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.81 BogoMIPS (lpj=7649296)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000028] Security Framework initialized
[ 0.000032] AppArmor: AppArmor disabled by boot time parameter
[ 0.000292] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001303] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001746] Mount-cache hash table entries: 256
[ 0.001920] Initializing cgroup subsys cpuacct
[ 0.001922] Initializing cgroup subsys memory
[ 0.001929] Initializing cgroup subsys devices
[ 0.001930] Initializing cgroup subsys freezer
[ 0.001932] Initializing cgroup subsys net_cls
[ 0.001933] Initializing cgroup subsys blkio
[ 0.001956] CPU: Physical Processor ID: 0
[ 0.001957] CPU: Processor Core ID: 0
[ 0.001961] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.001961] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.001964] mce: CPU supports 7 MCE banks
[ 0.001973] CPU0: Thermal monitoring handled by SMI
[ 0.001980] using mwait in idle threads.
[ 0.003235] ACPI: Core revision 20120320
[ 0.022452] ftrace: allocating 17956 entries in 71 pages
[ 0.032026] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.065015] CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz stepping 07
[ 0.169611] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.169616] PEBS disabled due to CPU errata.
[ 0.169618] ... version: 3
[ 0.169619] ... bit width: 48
[ 0.169620] ... generic registers: 4
[ 0.169621] ... value mask: 0000ffffffffffff
[ 0.169622] ... max period: 000000007fffffff
[ 0.169623] ... fixed-purpose events: 3
[ 0.169624] ... event mask: 000000070000000f
[ 0.189771] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.214083] CPU1: Thermal monitoring handled by SMI
[ 0.237404] CPU2: Thermal monitoring handled by SMI
[ 0.260721] CPU3: Thermal monitoring handled by SMI
[ 0.202946] Booting Node 0, Processors #1 #2 #3
[ 0.262851] Brought up 4 CPUs
[ 0.262854] Total of 4 processors activated (18365.24 BogoMIPS).
[ 0.266201] devtmpfs: initialized
[ 0.267152] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
[ 0.267818] NET: Registered protocol family 16
[ 0.267955] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.267956] ACPI: bus type pci registered
[ 0.268022] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.268024] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.288910] PCI: Using configuration type 1 for base access
[ 0.289067] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.289068] mtrr: probably your BIOS does not setup all CPUs.
[ 0.289069] mtrr: corrected configuration.
[ 0.289414] bio: create slab <bio-0> at 0
[ 0.289463] ACPI: Added _OSI(Module Device)
[ 0.289466] ACPI: Added _OSI(Processor Device)
[ 0.289467] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.289469] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.289470] ACPI: Added _OSI(Linux)
[ 0.291064] ACPI: EC: Look up EC in DSDT
[ 0.292584] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.295745] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
[ 0.296189] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100806)
[ 0.296593] ACPI: Dynamic OEM Table Load:
[ 0.296595] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100806)
[ 0.296838] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100806)
[ 0.297274] ACPI: Dynamic OEM Table Load:
[ 0.297276] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100806)
[ 0.297384] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100806)
[ 0.297780] ACPI: Dynamic OEM Table Load:
[ 0.297782] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100806)
[ 0.305149] ACPI: Interpreter enabled
[ 0.305152] ACPI: (supports S0 S3 S4 S5)
[ 0.305175] ACPI: Using IOAPIC for interrupt routing
[ 0.313980] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.314330] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.314334] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.314593] \_SB_.PCI0:_OSC invalid UUID
[ 0.314594] _OSC request data:1 8 1f
[ 0.314598] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.315012] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.315014] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.315016] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.315019] pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff]
[ 0.315047] PCI host bridge to bus 0000:00
[ 0.315049] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.315051] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.315053] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.315054] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.315062] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.315099] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.315130] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.315150] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.315160] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.315166] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.315171] pci 0000:00:02.0: reg 20: [io 0x6000-0x603f]
[ 0.315225] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.315249] pci 0000:00:16.0: reg 10: [mem 0xc7504000-0xc750400f 64bit]
[ 0.315327] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.315362] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.315693] pci 0000:00:1a.0: reg 10: [mem 0xc750a000-0xc750a3ff]
[ 0.317587] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.317616] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.317632] pci 0000:00:1b.0: reg 10: [mem 0xc7500000-0xc7503fff 64bit]
[ 0.317701] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.317725] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.317806] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.317833] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.317914] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.317941] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.318022] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.318047] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.318128] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.318164] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.318488] pci 0000:00:1d.0: reg 10: [mem 0xc7509000-0xc75093ff]
[ 0.320372] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.320400] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.320528] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.320547] pci 0000:00:1f.2: reg 10: [io 0x6088-0x608f]
[ 0.320556] pci 0000:00:1f.2: reg 14: [io 0x609c-0x609f]
[ 0.320564] pci 0000:00:1f.2: reg 18: [io 0x6080-0x6087]
[ 0.320573] pci 0000:00:1f.2: reg 1c: [io 0x6098-0x609b]
[ 0.320581] pci 0000:00:1f.2: reg 20: [io 0x6060-0x607f]
[ 0.320590] pci 0000:00:1f.2: reg 24: [mem 0xc7508000-0xc75087ff]
[ 0.320636] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.320657] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.320674] pci 0000:00:1f.3: reg 10: [mem 0xc7506000-0xc75060ff 64bit]
[ 0.320695] pci 0000:00:1f.3: reg 20: [io 0x6040-0x605f]
[ 0.320757] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000
[ 0.320773] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.320785] pci 0000:01:00.0: reg 18: [mem 0xc6500000-0xc651ffff 64bit]
[ 0.320794] pci 0000:01:00.0: reg 20: [io 0x5000-0x50ff]
[ 0.320810] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.320850] pci 0000:01:00.0: supports D1 D2
[ 0.326222] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.326230] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.326237] pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff]
[ 0.326246] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.326372] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
[ 0.326394] pci 0000:07:00.0: reg 10: [io 0x4000-0x40ff]
[ 0.326428] pci 0000:07:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
[ 0.326451] pci 0000:07:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
[ 0.326544] pci 0000:07:00.0: supports D1 D2
[ 0.326546] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.332892] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[ 0.332902] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.332911] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff]
[ 0.332925] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 0.333055] pci 0000:0d:00.0: [8086:0084] type 00 class 0x028000
[ 0.333100] pci 0000:0d:00.0: reg 10: [mem 0xc4500000-0xc4501fff 64bit]
[ 0.333318] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[ 0.339561] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
[ 0.339571] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.339580] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff]
[ 0.339595] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 0.339708] pci 0000:13:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.339731] pci 0000:13:00.0: reg 10: [mem 0xc3500000-0xc3500fff]
[ 0.339814] pci 0000:13:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 0.339886] pci 0000:13:00.0: supports D1 D2
[ 0.339888] pci 0000:13:00.0: PME# supported from D1 D2 D3hot
[ 0.346218] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
[ 0.346228] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.346237] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff]
[ 0.346251] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[ 0.346437] pci 0000:19:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.346490] pci 0000:19:00.0: reg 10: [mem 0xc3400000-0xc3401fff 64bit]
[ 0.346764] pci 0000:19:00.0: PME# supported from D0 D3hot D3cold
[ 0.352937] pci 0000:00:1c.3: PCI bridge to [bus 19-19]
[ 0.352952] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff]
[ 0.353008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.353116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.353142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.353167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.353192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.353228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.353292] \_SB_.PCI0:_OSC invalid UUID
[ 0.353293] _OSC request data:1 1f 1f
[ 0.353297] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.353323] \_SB_.PCI0:_OSC invalid UUID
[ 0.353324] _OSC request data:1 0 1d
[ 0.353327] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.353328] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.356349] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.356393] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[ 0.356433] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.356474] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.356516] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.356556] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 *4 5 6 10 11 12 14 15)
[ 0.356595] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[ 0.356634] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.356712] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.356718] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.356720] vgaarb: loaded
[ 0.356721] vgaarb: bridge control possible 0000:01:00.0
[ 0.356722] vgaarb: no bridge control possible 0000:00:02.0
[ 0.356754] PCI: Using ACPI for IRQ routing
[ 0.363951] PCI: pci_cache_line_size set to 64 bytes
[ 0.364084] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.364086] e820: reserve RAM buffer [mem 0x9ce3f000-0x9fffffff]
[ 0.364088] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.364089] e820: reserve RAM buffer [mem 0x15fe00000-0x15fffffff]
[ 0.364173] NetLabel: Initializing
[ 0.364174] NetLabel: domain hash size = 128
[ 0.364175] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.364186] NetLabel: unlabeled traffic allowed by default
[ 0.364213] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.364219] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.366233] Switching to clocksource hpet
[ 0.371064] pnp: PnP ACPI init
[ 0.371080] ACPI: bus type pnp registered
[ 0.371337] pnp 00:00: [bus 00-fe]
[ 0.371340] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.371342] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.371343] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.371345] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.371347] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.371349] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.371350] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.371352] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.371353] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.371355] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.371357] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.371358] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.371360] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.371362] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.371363] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.371365] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.371366] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.371368] pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
[ 0.371429] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.371446] pnp 00:01: [io 0x0000-0x001f]
[ 0.371448] pnp 00:01: [io 0x0081-0x0091]
[ 0.371449] pnp 00:01: [io 0x0093-0x009f]
[ 0.371451] pnp 00:01: [io 0x00c0-0x00df]
[ 0.371453] pnp 00:01: [dma 4]
[ 0.371472] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.371479] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.371496] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.371564] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.371586] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.371594] pnp 00:04: [io 0x00f0]
[ 0.371603] pnp 00:04: [irq 13]
[ 0.371621] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.371630] pnp 00:05: [io 0x002e-0x002f]
[ 0.371631] pnp 00:05: [io 0x004e-0x004f]
[ 0.371633] pnp 00:05: [io 0x0061]
[ 0.371634] pnp 00:05: [io 0x0063]
[ 0.371636] pnp 00:05: [io 0x0065]
[ 0.371637] pnp 00:05: [io 0x0067]
[ 0.371640] pnp 00:05: [io 0x0070]
[ 0.371641] pnp 00:05: [io 0x0080]
[ 0.371643] pnp 00:05: [io 0x0092]
[ 0.371644] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.371646] pnp 00:05: [io 0x0680-0x069f]
[ 0.371647] pnp 00:05: [io 0x1000-0x100f]
[ 0.371649] pnp 00:05: [io 0x1010-0x1013]
[ 0.371650] pnp 00:05: [io 0xffff]
[ 0.371652] pnp 00:05: [io 0x0400-0x0453]
[ 0.371653] pnp 00:05: [io 0x0458-0x047f]
[ 0.371655] pnp 00:05: [io 0x0500-0x057f]
[ 0.371656] pnp 00:05: [io 0x164e-0x164f]
[ 0.371698] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.371700] system 00:05: [io 0x1000-0x100f] has been reserved
[ 0.371702] system 00:05: [io 0x1010-0x1013] has been reserved
[ 0.371704] system 00:05: [io 0xffff] has been reserved
[ 0.371705] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.371707] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.371709] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.371711] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.371714] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.371720] pnp 00:06: [io 0x0070-0x0077]
[ 0.371725] pnp 00:06: [irq 8]
[ 0.371743] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.371759] pnp 00:07: [io 0x0454-0x0457]
[ 0.371789] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.371791] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.371817] pnp 00:08: [io 0x0060]
[ 0.371818] pnp 00:08: [io 0x0064]
[ 0.371823] pnp 00:08: [irq 1]
[ 0.371844] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.371871] pnp 00:09: [irq 12]
[ 0.371893] pnp 00:09: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.371978] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.371980] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 0.371982] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.371983] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.371985] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.371986] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.371988] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 0.371989] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.371991] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.371992] pnp 00:0a: [mem 0x9fa00000-0x9fa00fff]
[ 0.372029] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.372031] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.372035] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.372037] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.372039] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.372040] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.372042] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.372044] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.372046] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.372048] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
[ 0.372051] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373177] pnp 00:0b: [irq 23]
[ 0.373214] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.373231] pnp 00:0c: [mem 0x20000000-0x201fffff]
[ 0.373233] pnp 00:0c: [mem 0x40000000-0x401fffff]
[ 0.373280] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.373282] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.373285] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.373300] pnp: PnP ACPI: found 13 devices
[ 0.373302] ACPI: ACPI bus type pnp unregistered
[ 0.379871] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.379875] pci 0000:13:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.379921] pci 0000:01:00.0: BAR 6: assigned [mem 0xc6520000-0xc653ffff pref]
[ 0.379924] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.379926] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.379929] pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff]
[ 0.379931] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.379935] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
[ 0.379938] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.379944] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff]
[ 0.379948] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[ 0.379955] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
[ 0.379958] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.379963] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff]
[ 0.379968] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[ 0.379975] pci 0000:13:00.0: BAR 6: assigned [mem 0xc2400000-0xc240ffff pref]
[ 0.379976] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
[ 0.379979] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.379984] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff]
[ 0.379989] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
[ 0.379995] pci 0000:00:1c.3: PCI bridge to [bus 19-19]
[ 0.380001] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff]
[ 0.380048] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.380050] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.380052] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.380054] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 0.380056] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.380057] pci_bus 0000:01: resource 1 [mem 0xc6500000-0xc74fffff]
[ 0.380059] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.380061] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
[ 0.380062] pci_bus 0000:07: resource 1 [mem 0xc5500000-0xc64fffff]
[ 0.380064] pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[ 0.380066] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.380068] pci_bus 0000:0d: resource 1 [mem 0xc4500000-0xc54fffff]
[ 0.380069] pci_bus 0000:0d: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[ 0.380071] pci_bus 0000:13: resource 0 [io 0x2000-0x2fff]
[ 0.380073] pci_bus 0000:13: resource 1 [mem 0xc3500000-0xc44fffff]
[ 0.380074] pci_bus 0000:13: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
[ 0.380076] pci_bus 0000:19: resource 1 [mem 0xc3400000-0xc34fffff]
[ 0.380103] NET: Registered protocol family 2
[ 0.380205] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.380813] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.382539] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.382760] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.382761] TCP: reno registered
[ 0.382769] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.382790] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.382872] NET: Registered protocol family 1
[ 0.382885] pci 0000:00:02.0: Boot video device
[ 0.422032] PCI: CLS 64 bytes, default 64
[ 0.422076] Unpacking initramfs...
[ 0.476505] Freeing initrd memory: 2956k freed
[ 0.476893] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.476898] software IO TLB [mem 0x98e38000-0x9ce37fff] (64MB) mapped at [ffff880098e38000-ffff88009ce37fff]
[ 0.476934] Simple Boot Flag at 0x44 set to 0x1
[ 0.477348] audit: initializing netlink socket (disabled)
[ 0.477365] type=2000 audit(1346813518.366:1): initialized
[ 0.488213] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.489687] VFS: Disk quotas dquot_6.5.2
[ 0.489729] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.489811] msgmni has been set to 7806
[ 0.489991] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.490022] io scheduler noop registered
[ 0.490026] io scheduler deadline registered
[ 0.490068] io scheduler cfq registered (default)
[ 0.490161] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.490414] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.490415] vesafb: scrolling: redraw
[ 0.490417] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.490698] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90011100000, using 3072k, total 3072k
[ 0.546769] Console: switching to colour frame buffer device 128x48
[ 0.602764] fb0: VESA VGA frame buffer device
[ 0.602773] intel_idle: MWAIT substates: 0x21120
[ 0.602774] intel_idle: v0.4 model 0x2A
[ 0.602775] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.602813] GHES: HEST is not enabled!
[ 0.602858] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.603244] Linux agpgart interface v0.103
[ 0.603306] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.610388] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.610398] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.610493] mousedev: PS/2 mouse device common for all mice
[ 0.610522] rtc_cmos 00:06: RTC can wake from S4
[ 0.610663] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.610691] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.610770] cpuidle: using governor ladder
[ 0.610870] cpuidle: using governor menu
[ 0.610986] drop_monitor: Initializing network drop monitor service
[ 0.611048] TCP: cubic registered
[ 0.611131] NET: Registered protocol family 10
[ 0.611274] NET: Registered protocol family 17
[ 0.611283] Key type dns_resolver registered
[ 0.611475] PM: Hibernation image not present or could not be loaded.
[ 0.611485] registered taskstats version 1
[ 0.612065] rtc_cmos 00:06: setting system clock to 2012-09-05 02:51:59 UTC (1346813519)
[ 0.613268] Freeing unused kernel memory: 756k freed
[ 0.613364] Write protecting the kernel read-only data: 8192k
[ 0.615131] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.617271] Freeing unused kernel memory: 1496k freed
[ 0.619041] Freeing unused kernel memory: 616k freed
[ 0.626174] systemd-udevd[47]: starting version 189
[ 0.655321] ACPI: bus type usb registered
[ 0.655348] usbcore: registered new interface driver usbfs
[ 0.655358] usbcore: registered new interface driver hub
[ 0.655403] usbcore: registered new device driver usb
[ 0.655944] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.656389] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.656393] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.656399] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.656427] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.657509] SCSI subsystem initialized
[ 0.659560] libata version 3.00 loaded.
[ 0.660309] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.660333] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc750a000
[ 0.661741] xhci_hcd 0000:19:00.0: xHCI Host Controller
[ 0.661751] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 2
[ 0.661961] xhci_hcd 0000:19:00.0: irq 19, io mem 0xc3400000
[ 0.662065] xhci_hcd 0000:19:00.0: irq 41 for MSI/MSI-X
[ 0.662070] xhci_hcd 0000:19:00.0: irq 42 for MSI/MSI-X
[ 0.662075] xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X
[ 0.662080] xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X
[ 0.662084] xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X
[ 0.662411] xHCI xhci_add_endpoint called for root hub
[ 0.662413] xHCI xhci_check_bandwidth called for root hub
[ 0.662449] hub 2-0:1.0: USB hub found
[ 0.662458] hub 2-0:1.0: 2 ports detected
[ 0.662534] xhci_hcd 0000:19:00.0: xHCI Host Controller
[ 0.662539] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 3
[ 0.665645] xHCI xhci_add_endpoint called for root hub
[ 0.665647] xHCI xhci_check_bandwidth called for root hub
[ 0.665690] hub 3-0:1.0: USB hub found
[ 0.665701] hub 3-0:1.0: 2 ports detected
[ 0.669561] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.669874] hub 1-0:1.0: USB hub found
[ 0.669880] hub 1-0:1.0: 2 ports detected
[ 0.670003] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.670009] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.670209] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.670239] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.674124] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.674141] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc7509000
[ 0.682793] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.683097] hub 4-0:1.0: USB hub found
[ 0.683102] hub 4-0:1.0: 2 ports detected
[ 0.683189] ahci 0000:00:1f.2: version 3.0
[ 0.683266] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.696238] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
[ 0.696250] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 0.696267] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.703659] scsi0 : ahci
[ 0.703776] scsi1 : ahci
[ 0.703855] scsi2 : ahci
[ 0.704007] scsi3 : ahci
[ 0.704179] scsi4 : ahci
[ 0.704345] scsi5 : ahci
[ 0.704468] ata1: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508100 irq 46
[ 0.704470] ata2: DUMMY
[ 0.704471] ata3: DUMMY
[ 0.704472] ata4: DUMMY
[ 0.704473] ata5: DUMMY
[ 0.704476] ata6: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508380 irq 46
[ 0.976074] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.022712] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.029474] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.030170] ata1.00: ATA-8: TOSHIBA MK6476GSX, GS001C, max UDMA/100
[ 1.030178] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.031009] ata1.00: configured for UDMA/100
[ 1.031292] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6476GS GS00 PQ: 0 ANSI: 5
[ 1.036081] ata6.00: ATAPI: hp CDDVDW TS-L633J, HH00, max UDMA/100
[ 1.051077] ata6.00: configured for UDMA/100
[ 1.058952] scsi 5:0:0:0: CD-ROM hp CDDVDW TS-L633J HH00 PQ: 0 ANSI: 5
[ 1.062730] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.062793] sd 0:0:0:0: [sda] Write Protect is off
[ 1.062797] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.062823] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.067400] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.067410] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.067606] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.100109] hub 1-1:1.0: USB hub found
[ 1.100152] hub 1-1:1.0: 6 ports detected
[ 1.141729] sda: sda1 sda2 sda3 sda4
[ 1.142628] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.205950] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 1.329810] hub 4-1:1.0: USB hub found
[ 1.329908] hub 4-1:1.0: 6 ports detected
[ 1.395931] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
[ 1.479088] Refined TSC clocksource calibration: 2294.788 MHz.
[ 1.479094] Switching to clocksource tsc
[ 1.545838] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
[ 2.129197] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.394037] systemd-udevd[164]: starting version 189
[ 3.711894] ACPI: Requesting acpi_cpufreq
[ 4.002355] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1
[ 4.004596] ACPI: Lid Switch [LID]
[ 4.034358] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.034365] ACPI: Thermal Zone [THRM] (40 C)
[ 4.049188] Linux media interface: v0.10
[ 4.112314] mei 0000:00:16.0: setting latency timer to 64
[ 4.112380] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[ 4.121859] mei 0000:00:16.0: wd: failed to find the client
[ 4.166106] ACPI: Battery Slot [BAT0] (battery present)
[ 4.168610] ACPI: AC Adapter [AC] (on-line)
[ 4.168721] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.168727] ACPI: Power Button [PWRB]
[ 4.168885] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.168888] ACPI: Power Button [PWRF]
[ 4.168928] wmi: Mapper loaded
[ 4.304865] [drm] Initialized drm 1.1.0 20060810
[ 4.329090] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 4.329098] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.329103] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 4.329107] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120320/utaddress-251)
[ 4.329111] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.329113] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.345397] ACPI Warning: 0x0000000000006040-0x000000000000605f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 4.345402] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.356609] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 4.356679] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 4.357451] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 4.357571] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 4.380370] iTCO_vendor_support: vendor-support=0
[ 4.380775] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.380815] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 4.380900] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.463940] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.464586] Initializing Realtek PCIE storage driver...
[ 4.464697] Resource length: 0x1000
[ 4.464721] Original address: 0xc3500000, remapped address: 0xffffc9001108c000
[ 4.464727] pci->irq = 18
[ 4.464728] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[ 4.471530] hp_accel: laptop model unknown, using default axes configuration
[ 4.479990] input: HP WMI hotkeys as /devices/virtual/input/input4
[ 4.539468] cfg80211: Calling CRDA to update world regulatory domain
[ 4.553690] Linux video capture interface: v2.00
[ 4.568340] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 4.586878] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.587026] r8169 0000:07:00.0: irq 49 for MSI/MSI-X
[ 4.587189] r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000063a000, 10:1f:74:0b:12:db, XID 0c900800 IRQ 49
[ 4.587191] r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.667685] scsi6 : SCSI emulation for PCI-Express Mass Storage devices
[ 4.667865] rts_pstor: waiting for device to settle before scanning
[ 4.703284] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 4.703286] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
[ 4.703374] iwlwifi 0000:0d:00.0: pci_resource_len = 0x00002000
[ 4.703375] iwlwifi 0000:0d:00.0: pci_resource_base = ffffc90011098000
[ 4.703377] iwlwifi 0000:0d:00.0: HW Revision ID = 0x0
[ 4.703465] iwlwifi 0000:0d:00.0: irq 50 for MSI/MSI-X
[ 4.813457] uvcvideo: Found UVC 1.00 device HP TrueVision HD (5986:02ac)
[ 4.820752] input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[ 4.820819] usbcore: registered new interface driver uvcvideo
[ 4.820821] USB Video Class driver (1.1.1)
[ 4.837791] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 4.883826] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 4.958734] iwlwifi 0000:0d:00.0: loaded firmware version 39.31.5.1 build 35138
[ 4.958843] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 4.958846] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 4.958849] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 4.958851] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[ 4.958853] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_P2P disabled
[ 4.958855] iwlwifi 0000:0d:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[ 4.958921] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 4.980302] iwlwifi 0000:0d:00.0: device EEPROM VER=0x15d, CALIB=0x6
[ 4.980304] iwlwifi 0000:0d:00.0: Device SKU: 0x50
[ 4.980306] iwlwifi 0000:0d:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[ 4.980314] iwlwifi 0000:0d:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 4.980396] Registered led device: phy0-led
[ 5.154781] lis3lv02d: 8 bits 3DC sensor found
[ 5.239215] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 5.244513] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 5.386995] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
[ 5.387759] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
[ 5.388377] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
[ 5.388964] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
[ 5.389519] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.421442] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.421699] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.421928] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.423619] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[ 5.423622] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 5.423745] Console: switching to colour dummy device 80x25
[ 5.424512] i915 0000:00:02.0: setting latency timer to 64
[ 5.453230] i915 0000:00:02.0: irq 51 for MSI/MSI-X
[ 5.453237] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.453238] [drm] Driver supports precise vblank timestamp query.
[ 5.454086] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.454088] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 5.583778] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input11
[ 5.584235] Registered led device: hp::hddprotect
[ 5.584274] hp_accel: driver loaded
[ 5.667382] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 5.667707] rts_pstor: device scan complete
[ 5.667902] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 5.908962] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 6.034920] fbcon: inteldrmfb (fb0) is primary device
[ 6.253430] Console: switching to colour frame buffer device 170x48
[ 6.262002] fb0: inteldrmfb frame buffer device
[ 6.262007] drm: registered panic notifier
[ 6.262445] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 6.264748] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 6.264897] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input12
[ 6.267196] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.267393] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 6.267616] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.946732] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 6.952025] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 6.955527] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 7.050774] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 7.097940] Adding 2002640k swap on /dev/sda4. Priority:-1 extents:1 across:2002640k
[ 13.380176] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 13.441659] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 13.501477] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.819558] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 14.998623] [drm] radeon defaulting to kernel modesetting.
[ 14.998625] [drm] radeon kernel modesetting enabled.
[ 14.998638] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[ 14.998670] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[ 14.998866] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x1656).
[ 14.998911] [drm] register mmio base: 0xC6500000
[ 14.998912] [drm] register mmio size: 131072
[ 14.998915] vga_switcheroo: enabled
[ 14.999258] radeon atpx: version is 1
[ 15.174912] ATOM BIOS: HP/Flex
[ 15.175291] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 15.175296] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 15.177480] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 15.177485] [drm] RAM width 64bits DDR
[ 15.177569] [TTM] Zone kernel: Available graphics memory: 2000006 kiB
[ 15.177572] [TTM] Initializing pool allocator
[ 15.177580] [TTM] Initializing DMA pool allocator
[ 15.177617] [drm] radeon: 1024M of VRAM memory ready
[ 15.177618] [drm] radeon: 512M of GTT memory ready.
[ 15.177634] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 15.177635] [drm] Driver supports precise vblank timestamp query.
[ 15.177679] radeon 0000:01:00.0: irq 52 for MSI/MSI-X
[ 15.177689] radeon 0000:01:00.0: radeon: using MSI.
[ 15.177745] [drm] radeon: irq initialized.
[ 15.177748] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 15.178068] [drm] Loading CAICOS Microcode
[ 15.229646] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 15.229868] radeon 0000:01:00.0: WB enabled
[ 15.229877] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880157b5ac00
[ 15.247077] [drm] ring test on 0 succeeded in 3 usecs
[ 15.247316] [drm] ib test on ring 0 succeeded in 0 usecs
[ 15.247575] [drm] Radeon Display Connectors
[ 15.252218] [drm] Internal thermal controller with fan control
[ 15.253256] [drm] radeon: power management initialized
[ 15.253330] No connectors reported connected with modes
[ 15.253332] [drm] Cannot find any crtc or sizes - going 1024x768
[ 15.254694] [drm] fb mappable at 0xA0142000
[ 15.254696] [drm] vram apper at 0xA0000000
[ 15.254696] [drm] size 3145728
[ 15.254697] [drm] fb depth is 24
[ 15.254698] [drm] pitch is 4096
[ 15.254773] fb1: radeondrmfb frame buffer device
[ 15.254776] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:00.0 on minor 1
[ 15.255133] radeon: switched off
[ 19.291063] r8169 0000:07:00.0: eth0: link down
[ 19.291856] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.096135] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 22.161805] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.198918] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 22.278075] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.459303] r8169 0000:07:00.0: eth0: link down
[ 22.459580] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.629071] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 22.693058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.715415] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 22.781310] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.348167] wlan0: authenticate with 94:0c:6d:e8:42:c8
[ 25.360283] wlan0: send auth to 94:0c:6d:e8:42:c8 (try 1/3)
[ 25.362816] wlan0: authenticated
[ 25.363548] wlan0: associate with 94:0c:6d:e8:42:c8 (try 1/3)
[ 25.365742] wlan0: RX AssocResp from 94:0c:6d:e8:42:c8 (capab=0x431 status=0 aid=7)
[ 25.368005] wlan0: associated
[ 25.368764] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 28.124260] wlan0: deauthenticating from 94:0c:6d:e8:42:c8 by local choice (reason=3)
[ 28.161341] cfg80211: Calling CRDA to update world regulatory domain
[ 28.207656] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 28.320714] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.691064] wlan0: authenticate with 94:0c:6d:e8:42:c8
[ 28.706353] wlan0: send auth to 94:0c:6d:e8:42:c8 (try 1/3)
[ 28.708656] wlan0: authenticated
[ 28.711810] wlan0: associate with 94:0c:6d:e8:42:c8 (try 1/3)
[ 28.714086] wlan0: RX AssocResp from 94:0c:6d:e8:42:c8 (capab=0x431 status=0 aid=7)
[ 28.716288] wlan0: associated
[ 28.717062] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 34.637930] fuse init (API version 7.19)
[ 6688.601981] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
[ 6688.792937] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=0
[ 6689.378692] wlan0: deauthenticating from 94:0c:6d:e8:42:c8 by local choice (reason=3)
[ 6689.387955] cfg80211: Calling CRDA to update world regulatory domain
[ 6689.420781] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 6689.485164] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6689.510796] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 6689.584266] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6689.791074] r8169 0000:07:00.0: eth0: link down
[ 6689.791862] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6689.908075] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 6689.972119] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6689.988955] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 6690.051415] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6690.088469] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 6690.167119] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6690.333963] r8169 0000:07:00.0: eth0: link down
[ 6690.334231] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6690.777441] PM: Syncing filesystems ... done.
[ 6690.780575] PM: Preparing system for mem sleep
[ 6690.816324] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 6690.829562] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6690.842904] PM: Entering mem sleep
[ 6690.842958] Suspending console(s) (use no_console_suspend to debug)
[ 6690.860740] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6690.860856] sd 0:0:0:0: [sda] Stopping disk
[ 6690.914014] Ready to suspend
[ 6691.925694] PM: suspend of devices complete after 1083.060 msecs
[ 6691.925862] PM: late suspend of devices complete after 0.166 msecs
[ 6691.926034] xhci_hcd 0000:19:00.0: wake-up capability enabled by ACPI
[ 6691.965725] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 6691.979002] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 6692.005642] PM: noirq suspend of devices complete after 79.825 msecs
[ 6692.005827] ACPI: Preparing to enter system sleep state S3
[ 6692.015827] PM: Saving platform NVS memory
[ 6692.018938] Disabling non-boot CPUs ...
[ 6692.122133] CPU 1 is now offline
[ 6692.225431] CPU 2 is now offline
[ 6692.328698] CPU 3 is now offline
[ 6692.329032] Extended CMOS year: 2000
[ 6692.329977] ACPI: Low-level resume complete
[ 6692.330017] PM: Restoring platform NVS memory
[ 6692.330422] CPU0: Thermal monitoring handled by SMI
[ 6692.330477] Extended CMOS year: 2000
[ 6692.330514] Enabling non-boot CPUs ...
[ 6692.337322] Booting Node 0 Processor 1 APIC 0x1
[ 6692.348459] CPU1: Thermal monitoring handled by SMI
[ 6692.350970] CPU1 is up
[ 6692.351036] Booting Node 0 Processor 2 APIC 0x2
[ 6692.362169] CPU2: Thermal monitoring handled by SMI
[ 6692.364655] CPU2 is up
[ 6692.364709] Booting Node 0 Processor 3 APIC 0x3
[ 6692.375841] CPU3: Thermal monitoring handled by SMI
[ 6692.378389] CPU3 is up
[ 6692.381846] ACPI: Waking up from system sleep state S3
[ 6692.427001] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 6692.427279] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 6692.427860] xhci_hcd 0000:19:00.0: wake-up capability disabled by ACPI
[ 6692.427970] PM: noirq resume of devices complete after 1.157 msecs
[ 6692.428094] PM: early resume of devices complete after 0.082 msecs
[ 6692.428122] i915 0000:00:02.0: setting latency timer to 64
[ 6692.428171] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6692.428205] mei 0000:00:16.0: irq 47 for MSI/MSI-X
[ 6692.428235] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6692.428251] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 6692.428263] ahci 0000:00:1f.2: setting latency timer to 64
[ 6692.428308] Ready to resume
[ 6692.428326] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[ 6692.428370] usb usb2: root hub lost power or was reset
[ 6692.428371] usb usb3: root hub lost power or was reset
[ 6692.428850] xhci_hcd 0000:19:00.0: irq 41 for MSI/MSI-X
[ 6692.428857] xhci_hcd 0000:19:00.0: irq 42 for MSI/MSI-X
[ 6692.428863] xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X
[ 6692.428868] xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X
[ 6692.428873] xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X
[ 6692.429009] mei 0000:00:16.0: wd: failed to find the client
[ 6692.466462] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 6692.507694] r8169 0000:07:00.0: eth0: link down
[ 6692.666731] usb 1-1.2: reset high-speed USB device number 4 using ehci_hcd
[ 6692.759956] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6692.794354] ata6.00: configured for UDMA/100
[ 6692.816656] usb 1-1.1: reset full-speed USB device number 3 using ehci_hcd
[ 6693.190087] Extended CMOS year: 2000
[ 6694.905521] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6694.907154] ata1.00: configured for UDMA/100
[ 6694.918991] sd 0:0:0:0: [sda] Starting disk
[ 6694.958149] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 6695.028479] PM: resume of devices complete after 2601.716 msecs
[ 6695.028745] PM: Finishing wakeup.
[ 6695.028745] Restarting tasks ... done.
[ 6695.048347] video LNXVIDEO:00: Restoring backlight state
[ 6695.048351] video LNXVIDEO:01: Restoring backlight state
[ 6698.912705] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 6698.977530] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6699.004514] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 6699.077106] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6699.211939] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=600
[ 6699.225407] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 6699.227483] r8169 0000:07:00.0: eth0: link down
[ 6699.227870] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6699.260517] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 6699.265329] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 6699.275880] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
[ 6699.359591] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=600
[ 6699.474939] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 6699.537221] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6699.542069] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 6699.543789] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 6699.551833] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
[ 6699.592968] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[ 6699.653682] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6700.107198] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=600
[ 6700.117214] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 6700.130084] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=600
[ 6700.290937] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=600
[ 6700.293954] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=600
[ 6701.736881] wlan0: authenticate with 94:0c:6d:e8:42:c8
[ 6701.740069] wlan0: send auth to 94:0c:6d:e8:42:c8 (try 1/3)
[ 6701.742658] wlan0: authenticated
[ 6701.745337] wlan0: associate with 94:0c:6d:e8:42:c8 (try 1/3)
[ 6701.747555] wlan0: RX AssocResp from 94:0c:6d:e8:42:c8 (capab=0x431 status=0 aid=160)
[ 6701.749882] wlan0: associated
[ 6701.750661] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6819.709207] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 6819.710418] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 6819.720077] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
[ 6945.639430] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 6945.640757] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 6945.653181] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
[ 6945.787994] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 6945.789680] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 6945.798748] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
[ 7028.118781] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
[ 7028.120382] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7028.121715] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7028.123314] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7028.124912] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7028.124919] psmouse serio1: issuing reconnect request
[ 7120.055330] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7120.060247] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7120.072193] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
[ 7318.990918] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
[ 7318.991893] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7318.993405] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7318.994648] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7318.995744] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7318.995750] psmouse serio1: issuing reconnect request
[ 7926.915218] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7926.920120] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7930.731387] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
[ 7949.893287] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7949.894936] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7949.903923] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
[ 7949.952331] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
[ 7949.955450] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7949.956827] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7949.958805] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7949.960385] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 7949.960394] psmouse serio1: issuing reconnect request
[ 8110.184728] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8110.185918] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8110.195428] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
[ 8144.103070] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8144.104649] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8144.113722] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
[ 8230.798727] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
[ 8230.800268] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8230.802331] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8230.805149] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8230.814605] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
[ 8230.814615] psmouse serio1: issuing reconnect request
[ 8303.332553] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8303.341856] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8303.350726] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
[ 8318.364314] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8318.368383] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8318.382304] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
[ 8335.914607] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8335.915878] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8335.926130] psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
[ 8391.021068] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
[ 8391.022340] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8391.023851] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8391.025411] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8391.026817] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8391.026825] psmouse serio1: issuing reconnect request
[ 8470.956176] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
[ 8470.958844] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8470.964629] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8470.966195] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8470.967722] psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
[ 8470.967731] psmouse serio1: issuing reconnect requestPlease help me.
Thanks so much.
Offline
#2 2012-09-05 15:12:51
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 19,772
Re: My laptop is consuming all battery and heating to much
When the machine is just sitting there, what is the output of cpufreq-info ??
Look around in /sys/backlight and look at the content of the files in the directories there. What is the display brightness vs the max brightness?
ewaller@odin:~ 1004 %cat /sys/class/backlight/acpi_video0/brightness
0
ewaller@odin:~ 1005 %cat /sys/class/backlight/acpi_video0/max_brightness
10
ewaller@odin:~ 1006 %That laptop is 50 km away, with the lid closed. I am talking to it over an ssh link -- hence, no back light 
You are running about 12C more than my machine
ewaller@odin:~[1] 1007 %cat /sys/class/thermal/thermal_zone0/temp
52000
ewaller@odin:~ 1008 %Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Offline
#3 2012-09-05 15:19:50
- klios
- Member
- Registered: 2012-03-17
- Posts: 22
Re: My laptop is consuming all battery and heating to much
Hi, thanks for reply.
This is what i have on that files.
12:16:57 asd@Klios ~ cat /sys/class/thermal/thermal_zone0/temp
65000
12:17:12 asd@Klios ~ cat /sys/class/backlight/intel_backlight/brightness
2441
12:17:40 asd@Klios ~ cat /sys/class/backlight/intel_backlight/max_brightness
4882Offline
#4 2012-09-05 15:25:24
- klios
- Member
- Registered: 2012-03-17
- Posts: 22
Re: My laptop is consuming all battery and heating to much
cpupower frequency-info
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.30 GHz
available frequency steps: 2.30 GHz, 2.30 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 1000 MHz, 800 MHz
available cpufreq governors: conservative, powersave, ondemand, performance
current policy: frequency should be within 800 MHz and 2.30 GHz.
The governor "conservative" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
cpufreq stats: 2.30 GHz:0,02%, 2.30 GHz:0,05%, 1.80 GHz:0,05%, 1.60 GHz:0,03%, 1.40 GHz:0,01%, 1.20 GHz:0,16%, 1000 MHz:0,38%, 800 MHz:99,29% (1017)
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active coresThax
Offline
#5 2012-09-05 15:35:22
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 19,772
Re: My laptop is consuming all battery and heating to much
That all looks pretty good 
Certainly nothing obvious.
If were just hot, I would be checking the cooling system, but you say the battery life is low as well -- blowing that theory.
I think the next thing to look at is the output of powertop. See if you can see what is using energy at high rates. You can also play with the "tunables" tab to see if there is any effect
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Offline
#6 2012-09-05 16:06:19
- klios
- Member
- Registered: 2012-03-17
- Posts: 22
Re: My laptop is consuming all battery and heating to much
I've already play with tunables on powertop but nothing changes. It stills consumes around 25W when it should consume 10-16W..
hp-wmi is always at 100% and i dont know what that is.
Thanks for helping.
Offline
#7 2012-09-05 19:49:54
- C6M6
- Member
- Registered: 2012-07-13
- Posts: 39
Re: My laptop is consuming all battery and heating to much
what's the state of the discrete card? it seem to be powered on, if so poweroff the unused card and see the output of powertop (temperature and power should go down), maybe also check the cooling, having those temperature when nearly in idle seem a little bit strange
Offline
#8 2012-09-05 20:28:11
- klios
- Member
- Registered: 2012-03-17
- Posts: 22
Re: My laptop is consuming all battery and heating to much
C6M6 wrote:
what's the state of the discrete card? it seem to be powered on, if so poweroff the unused card and see the output of powertop (temperature and power should go down), maybe also check the cooling, having those temperature when nearly in idle seem a little bit strange
Its disabled.
17:26:07 asd@Klios ~ cat /sys/kernel/debug/vgaswitcheroo/switch
0:IGD:+:Pwr:0000:00:02.0
1:DIS: :Off:0000:01:00.0Offline
#9 2012-09-06 01:30:10
- andresvia
- Member
- Registered: 2012-09-06
- Posts: 5
Re: My laptop is consuming all battery and heating to much
I'm having a similar problem with a Dell Vostro 3460, maybe we can find a solution that help both of us.
Offline
#10 2012-09-07 09:58:55
- C6M6
- Member
- Registered: 2012-07-13
- Posts: 39
Re: My laptop is consuming all battery and heating to much
the high power consumption is always present or only when you recover from suspend/hibernate? i'm asking this because, at least for me, when i recover from suspend/hibernate even if vgaswitcheroo say that the discrete card is off in reality it's powered.
For me a way to know if the discrete card is powered is to read the sensors output (maybe not the best way, but it function)
Discrete card ON
radeon-pci-0100
Adapter: PCI adapter
temp1: +43.5°C Discrete card OFF
radeon-pci-0100
Adapter: PCI adapter
temp1: -128.0°C Offline
#11 2012-09-09 00:26:00
- klios
- Member
- Registered: 2012-03-17
- Posts: 22
Re: My laptop is consuming all battery and heating to much
C6M6 wrote:
the high power consumption is always present or only when you recover from suspend/hibernate? i'm asking this because, at least for me, when i recover from suspend/hibernate even if vgaswitcheroo say that the discrete card is off in reality it's powered.
For me a way to know if the discrete card is powered is to read the sensors output (maybe not the best way, but it function)Discrete card ON
radeon-pci-0100 Adapter: PCI adapter temp1: +43.5°CDiscrete card OFF
radeon-pci-0100 Adapter: PCI adapter temp1: -128.0°C
Yes, high power consumption is always present.
DISCRETE CARD is OFF.
Offline
#12 2012-09-09 03:05:47
- kvanberendonck
- Member
- Registered: 2012-08-17
- Posts: 45
Re: My laptop is consuming all battery and heating to much
If you're using an APU or dual AMD graphics card setup:
I had a similar issue. Swapped from the open source driver (radeon) to the catalyst driver (fglrx?) and then used CCC (Catalyst Control Center) to turn off the discrete card and enable the integrated card battery mode.
My laptop which used to last 1hr w/ stock and 2/hrs with radeon now lasts upwards of 4hrs and the brightness works. Downside is that the catalyst driver doesn't give you temperature sensor output.
Last edited by kvanberendonck (2012-09-09 03:08:08)
Offline