You are not logged in.

#1 2012-09-16 18:21:08

depeha
Member
Registered: 2011-06-20
Posts: 9

Remounting filesystem in read-only

Hi,

I have serious problem with my laptop. In last two weeks filesystem remounted itself in read only mode four times during usual usage.

last dmesg:

[  389.433965] ata1.00: exception Emask 0x10 SAct 0x800 SErr 0x4890000 action 0xe frozen
[  389.433969] ata1.00: irq_stat 0x08400040, interface fatal error, connection status changed
[  389.433972] ata1: SError: { PHYRdyChg 10B8B LinkSeq DevExch }
[  389.433974] ata1.00: failed command: WRITE FPDMA QUEUED
[  389.433978] ata1.00: cmd 61/58:58:80:5b:43/00:00:04:00:00/40 tag 11 ncq 45056 out
[  389.433978]          res 40/00:58:80:5b:43/00:00:04:00:00/40 Emask 0x10 (ATA bus error)
[  389.433980] ata1.00: status: { DRDY }
[  389.433985] ata1: hard resetting link
[  390.151135] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  390.173573] ata1.00: configured for UDMA/133
[  390.184410] sd 0:0:0:0: [sda]  
[  390.184414] Result: hostbyte=0x00 driverbyte=0x08
[  390.184419] sd 0:0:0:0: [sda]  
[  390.184421] Sense Key : 0xb [current] [descriptor]
[  390.184426] Descriptor sense data with sense descriptors (in hex):
[  390.184429]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[  390.184441]         04 43 5b 80 
[  390.184447] sd 0:0:0:0: [sda]  
[  390.184449] ASC=0x0 ASCQ=0x0
[  390.184452] sd 0:0:0:0: [sda] CDB: 
[  390.184453] cdb[0]=0x2a: 2a 00 04 43 5b 80 00 00 58 00
[  390.184463] end_request: I/O error, dev sda, sector 71523200
[  390.184489] ata1: EH complete
[  390.184513] Aborting journal on device sda2-8.
[  390.184545] EXT4-fs error (device sda2) in ext4_reserve_inode_write:4476: Journal has aborted
[  390.184722] EXT4-fs error (device sda2) in ext4_dirty_inode:4603: Journal has aborted
[  390.185213] EXT4-fs error (device sda2) in ext4_da_writepages:2388: IO failure
[  390.198909] EXT4-fs error (device sda2): ext4_journal_start_sb:370: Detected aborted journal
[  390.198917] EXT4-fs (sda2): Remounting filesystem read-only
[  390.199026] EXT4-fs error (device sda2): ext4_journal_start_sb:370: Detected aborted journal
[  390.199035] EXT4-fs (sda2): ext4_da_writepages: jbd2_start: 2048 pages, ino 1443133; err -30

fsck doesn't show any errors.
I was searching for solution, but all similar problems was hw related (bad cable/disk).  Any change this is only sw related?


It's ssd ocz agility 3

Disk /dev/sda: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0008ef68

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *          63    29302559    14651248+  83  Linux
/dev/sda2        29302560   117231407    43964424   83  Linux

Offline

#2 2012-10-13 12:20:46

argos.void
Member
Registered: 2010-07-18
Posts: 28

Re: Remounting filesystem in read-only

Same here.


"The old UNIX hackers never die, they only turn to zombie processes"

Offline

#3 2012-10-13 14:43:13

tomegun
Developer
From: France
Registered: 2010-05-28
Posts: 661

Re: Remounting filesystem in read-only

Quite possibly broken hardware. I'd make backups ASAP :-S

Offline

#4 2012-10-13 17:44:10

teateawhy
Member
From: GER
Registered: 2012-03-05
Posts: 1,138
Website

Re: Remounting filesystem in read-only

If you believe recent statistics OCZ has up to OCZ 7.03% return rates in the SSD market.
Source: http://www.overclockers.com/forums/show … p?t=712600
6.37% OCZ Agility 3 60 GB
I hope you can copy your data to a secure place.

Edit: 15.58% OCZ Vertex 2 Series SSD 240 GB : Really?

Last edited by teateawhy (2012-10-13 17:45:59)

Offline

Board footer

Powered by FluxBB