You are not logged in.

#1 2012-10-08 13:46:18

GordonGR
Member
From: Thessaloniki, Greece
Registered: 2011-11-07
Posts: 242

[SOLVED] Kernel 3.5.6 breaks X?

Hallo everyone.

I ran across an issue today, right after I updated the kernel to 3.5.6 (and rebooted). I logged in as a user and hit startx to open XFCE, as always. The server started in tty1 as always, but stuck on loading. For the time being I reverted to 3.5.5 and it works.

I'm quoting the logs I have — apparently I have done something wrong while moving to systemd last month and I have no more errors.log, everything.log etc since 17 September.

Thanks.

/var/log/Xorg.0.log:

[   217.215] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[   217.217] X Protocol Version 11, Revision 0
[   217.218] Build Operating System: Linux 3.4.8-1-ARCH x86_64 
[   217.218] Current Operating System: Linux Russell 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012 x86_64
[   217.218] Kernel command line: root=/dev/sda1 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux 
[   217.220] Build Date: 27 August 2012  08:04:39AM
[   217.221]  
[   217.221] Current version of pixman: 0.26.2
[   217.223] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   217.223] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   217.227] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct  8 15:57:26 2012
[   217.227] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   217.228] (==) No Layout section.  Using the first Screen section.
[   217.228] (==) No screen section available. Using defaults.
[   217.228] (**) |-->Screen "Default Screen Section" (0)
[   217.228] (**) |   |-->Monitor "<default monitor>"
[   217.228] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   217.228] (==) Automatically adding devices
[   217.228] (==) Automatically enabling devices
[   217.228] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   217.228] (==) ModulePath set to "/usr/lib/xorg/modules"
[   217.228] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   217.228] (II) Loader magic: 0x7c8b00
[   217.228] (II) Module ABI versions:
[   217.228] 	X.Org ANSI C Emulation: 0.4
[   217.228] 	X.Org Video Driver: 12.1
[   217.228] 	X.Org XInput driver : 16.0
[   217.228] 	X.Org Server Extension : 6.0
[   217.228] (--) PCI:*(0:0:2:0) 8086:2e32:1849:2e32 rev 3, Mem @ 0xfe400000/4194304, 0xe0000000/268435456, I/O @ 0x0000dc00/8
[   217.228] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   217.228] (II) LoadModule: "extmod"
[   217.229] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   217.229] (II) Module extmod: vendor="X.Org Foundation"
[   217.229] 	compiled for 1.12.4, module version = 1.0.0
[   217.229] 	Module class: X.Org Server Extension
[   217.229] 	ABI class: X.Org Server Extension, version 6.0
[   217.229] (II) Loading extension MIT-SCREEN-SAVER
[   217.229] (II) Loading extension XFree86-VidModeExtension
[   217.229] (II) Loading extension XFree86-DGA
[   217.229] (II) Loading extension DPMS
[   217.229] (II) Loading extension XVideo
[   217.229] (II) Loading extension XVideo-MotionCompensation
[   217.229] (II) Loading extension X-Resource
[   217.229] (II) LoadModule: "dbe"
[   217.229] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   217.229] (II) Module dbe: vendor="X.Org Foundation"
[   217.229] 	compiled for 1.12.4, module version = 1.0.0
[   217.229] 	Module class: X.Org Server Extension
[   217.229] 	ABI class: X.Org Server Extension, version 6.0
[   217.229] (II) Loading extension DOUBLE-BUFFER
[   217.229] (II) LoadModule: "glx"
[   217.229] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   217.229] (II) Module glx: vendor="X.Org Foundation"
[   217.229] 	compiled for 1.12.4, module version = 1.0.0
[   217.229] 	ABI class: X.Org Server Extension, version 6.0
[   217.229] (==) AIGLX enabled
[   217.229] (II) Loading extension GLX
[   217.229] (II) LoadModule: "record"
[   217.229] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   217.229] (II) Module record: vendor="X.Org Foundation"
[   217.229] 	compiled for 1.12.4, module version = 1.13.0
[   217.229] 	Module class: X.Org Server Extension
[   217.229] 	ABI class: X.Org Server Extension, version 6.0
[   217.230] (II) Loading extension RECORD
[   217.230] (II) LoadModule: "dri"
[   217.230] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   217.230] (II) Module dri: vendor="X.Org Foundation"
[   217.230] 	compiled for 1.12.4, module version = 1.0.0
[   217.230] 	ABI class: X.Org Server Extension, version 6.0
[   217.230] (II) Loading extension XFree86-DRI
[   217.230] (II) LoadModule: "dri2"
[   217.230] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   217.230] (II) Module dri2: vendor="X.Org Foundation"
[   217.230] 	compiled for 1.12.4, module version = 1.2.0
[   217.230] 	ABI class: X.Org Server Extension, version 6.0
[   217.230] (II) Loading extension DRI2
[   217.230] (==) Matched intel as autoconfigured driver 0
[   217.230] (==) Matched vesa as autoconfigured driver 1
[   217.230] (==) Matched fbdev as autoconfigured driver 2
[   217.230] (==) Assigned the driver to the xf86ConfigLayout
[   217.230] (II) LoadModule: "intel"
[   217.230] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   217.230] (II) Module intel: vendor="X.Org Foundation"
[   217.230] 	compiled for 1.12.4, module version = 2.20.9
[   217.230] 	Module class: X.Org Video Driver
[   217.230] 	ABI class: X.Org Video Driver, version 12.1
[   217.230] (II) LoadModule: "vesa"
[   217.230] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   217.230] (II) Module vesa: vendor="X.Org Foundation"
[   217.230] 	compiled for 1.12.3, module version = 2.3.2
[   217.230] 	Module class: X.Org Video Driver
[   217.231] 	ABI class: X.Org Video Driver, version 12.0
[   217.231] (II) LoadModule: "fbdev"
[   217.231] (WW) Warning, couldn't open module fbdev
[   217.231] (II) UnloadModule: "fbdev"
[   217.231] (II) Unloading fbdev
[   217.231] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   217.231] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[   217.231] (II) VESA: driver for VESA chipsets: vesa
[   217.231] (--) using VT number 1

[   217.234] drmOpenDevice: node name is /dev/dri/card0
[   217.234] drmOpenDevice: open result is 7, (OK)
[   217.234] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[   217.234] drmOpenDevice: node name is /dev/dri/card0
[   217.234] drmOpenDevice: open result is 7, (OK)
[   217.234] drmOpenByBusid: drmOpenMinor returns 7
[   217.234] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[   217.234] (WW) Falling back to old probe method for vesa
[   217.234] drmOpenDevice: node name is /dev/dri/card0
[   217.234] drmOpenDevice: open result is 8, (OK)
[   217.234] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[   217.234] drmOpenDevice: node name is /dev/dri/card0
[   217.234] drmOpenDevice: open result is 8, (OK)
[   217.234] drmOpenByBusid: drmOpenMinor returns 8
[   217.234] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[   217.234] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   217.234] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   217.234] (==) intel(0): RGB weight 888
[   217.234] (==) intel(0): Default visual is TrueColor
[   217.234] (--) intel(0): Integrated Graphics Chipset: Intel(R) G41
[   217.234] (**) intel(0): Relaxed fencing enabled
[   217.234] (**) intel(0): Wait on SwapBuffers? enabled
[   217.234] (**) intel(0): Triple buffering? enabled
[   217.234] (**) intel(0): Framebuffer tiled
[   217.234] (**) intel(0): Pixmaps tiled
[   217.234] (**) intel(0): 3D buffers tiled
[   217.234] (**) intel(0): SwapBuffers wait enabled
[   217.234] (==) intel(0): video overlay key set to 0x101fe
[   217.386] (II) intel(0): Output VGA1 has no monitor section
[   217.653] (II) intel(0): EDID for output VGA1
[   217.653] (II) intel(0): Manufacturer: SAM  Model: 22  Serial#: 1095643447
[   217.653] (II) intel(0): Year: 2003  Week: 2
[   217.653] (II) intel(0): EDID Version: 1.3
[   217.653] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[   217.653] (II) intel(0): Sync:  Separate
[   217.653] (II) intel(0): Max Image Size [cm]: horiz.: 32  vert.: 24
[   217.653] (II) intel(0): Gamma: 1.82
[   217.653] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[   217.653] (II) intel(0): First detailed timing is preferred mode
[   217.653] (II) intel(0): redX: 0.639 redY: 0.323   greenX: 0.275 greenY: 0.597
[   217.653] (II) intel(0): blueX: 0.143 blueY: 0.062   whiteX: 0.283 whiteY: 0.298
[   217.653] (II) intel(0): Supported established timings:
[   217.653] (II) intel(0): 720x400@70Hz
[   217.653] (II) intel(0): 640x480@60Hz
[   217.653] (II) intel(0): 640x480@75Hz
[   217.653] (II) intel(0): Manufacturer's mask: 0
[   217.653] (II) intel(0): Supported standard timings:
[   217.653] (II) intel(0): #0: hsize: 640  vsize 480  refresh: 60  vid: 16433
[   217.653] (II) intel(0): #1: hsize: 640  vsize 480  refresh: 85  vid: 22833
[   217.653] (II) intel(0): #2: hsize: 800  vsize 600  refresh: 85  vid: 22853
[   217.653] (II) intel(0): #3: hsize: 1024  vsize 768  refresh: 85  vid: 22881
[   217.653] (II) intel(0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   217.653] (II) intel(0): Supported detailed timing:
[   217.653] (II) intel(0): clock: 94.5 MHz   Image Size:  312 x 234 mm
[   217.653] (II) intel(0): h_active: 1024  h_sync: 1072  h_sync_end 1168 h_blank_end 1376 h_border: 0
[   217.653] (II) intel(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 808 v_border: 0
[   217.653] (II) intel(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 71 kHz, PixClock max 115 MHz
[   217.653] (II) intel(0): Monitor name: SyncMaster
[   217.653] (II) intel(0): Serial No: HMCW109165
[   217.653] (II) intel(0): EDID (in hex):
[   217.653] (II) intel(0): 	00ffffffffffff004c2d220037314e41
[   217.653] (II) intel(0): 	020d0103682018522abbb9a352469824
[   217.653] (II) intel(0): 	0f484ca4000031403159455961598180
[   217.653] (II) intel(0): 	010101010101ea240060410028303060
[   217.653] (II) intel(0): 	130038ea1000001e000000fd0032a01e
[   217.653] (II) intel(0): 	470b000a202020202020000000fc0053
[   217.653] (II) intel(0): 	796e634d61737465720a2020000000ff
[   217.653] (II) intel(0): 	00484d43573130393136350a20200039
[   217.653] (II) intel(0): EDID vendor "SAM", prod id 34
[   217.653] (II) intel(0): Using EDID range info for horizontal sync
[   217.653] (II) intel(0): Using EDID range info for vertical refresh
[   217.653] (II) intel(0): Printing DDC gathered Modelines:
[   217.653] (II) intel(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz eP)
[   217.653] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   217.653] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   217.653] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   217.653] (II) intel(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz e)
[   217.653] (II) intel(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz e)
[   217.653] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   217.653] (II) intel(0): Printing probed modes for output VGA1
[   217.653] (II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz eP)
[   217.653] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   217.653] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   217.653] (II) intel(0): Modeline "1280x800"x74.9  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz e)
[   217.653] (II) intel(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)
[   217.653] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   217.653] (II) intel(0): Modeline "1280x768"x74.9  102.25  1280 1360 1488 1696  768 771 778 805 +hsync -vsync (60.3 kHz e)
[   217.653] (II) intel(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[   217.654] (II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   217.654] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   217.654] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   217.654] (II) intel(0): Modeline "1024x768"x87.0   44.90  1024 1032 1208 1264  768 768 772 817 interlace +hsync +vsync (35.5 kHz e)
[   217.654] (II) intel(0): Modeline "1024x576"x60.0   46.97  1024 1064 1168 1312  576 577 580 597 -hsync +vsync (35.8 kHz)
[   217.654] (II) intel(0): Modeline "800x600"x85.1   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz e)
[   217.654] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   217.654] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   217.654] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   217.654] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   217.654] (II) intel(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[   217.654] (II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz e)
[   217.654] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   217.654] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   217.654] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   217.654] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz e)
[   217.654] (II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz e)
[   217.654] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   217.654] (II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz e)
[   217.654] (II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz e)
[   217.654] (II) intel(0): Output VGA1 connected
[   217.654] (II) intel(0): Using exact sizes for initial modes
[   217.654] (II) intel(0): Output VGA1 using initial mode 1024x768
[   217.654] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   217.654] (II) intel(0): Kernel page flipping support detected, enabling
[   217.654] (**) intel(0): Display dimensions: (320, 240) mm
[   217.654] (**) intel(0): DPI set to (81, 81)
[   217.654] (II) Loading sub module "fb"
[   217.654] (II) LoadModule: "fb"
[   217.654] (II) Loading /usr/lib/xorg/modules/libfb.so
[   217.654] (II) Module fb: vendor="X.Org Foundation"
[   217.654] 	compiled for 1.12.4, module version = 1.0.0
[   217.654] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   217.654] (II) Loading sub module "dri2"
[   217.654] (II) LoadModule: "dri2"
[   217.654] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   217.654] (II) Module dri2: vendor="X.Org Foundation"
[   217.654] 	compiled for 1.12.4, module version = 1.2.0
[   217.654] 	ABI class: X.Org Server Extension, version 6.0
[   217.654] (II) UnloadModule: "vesa"
[   217.654] (II) Unloading vesa
[   217.654] (==) Depth 24 pixmap format is 32 bpp
[   217.654] (II) intel(0): [DRI2] Setup complete
[   217.654] (II) intel(0): [DRI2]   DRI driver: i965
[   217.654] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[   217.664] (II) UXA(0): Driver registered support for the following operations:
[   217.664] (II)         solid
[   217.664] (II)         copy
[   217.664] (II)         composite (RENDER acceleration)
[   217.664] (II)         put_image
[   217.664] (II)         get_image
[   217.664] (==) intel(0): Backing store disabled
[   217.664] (==) intel(0): Silken mouse enabled
[   217.664] (II) intel(0): Initializing HW Cursor
[   217.664] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   217.664] (==) intel(0): DPMS enabled
[   217.664] (==) intel(0): Intel XvMC decoder enabled
[   217.664] (II) intel(0): Set up textured video
[   217.664] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   217.664] (II) intel(0): direct rendering: DRI2 Enabled
[   217.664] (==) intel(0): hotplug detection: "enabled"
[   217.680] (--) RandR disabled
[   217.680] (II) Initializing built-in extension Generic Event Extension
[   217.680] (II) Initializing built-in extension SHAPE
[   217.680] (II) Initializing built-in extension MIT-SHM
[   217.680] (II) Initializing built-in extension XInputExtension
[   217.680] (II) Initializing built-in extension XTEST
[   217.680] (II) Initializing built-in extension BIG-REQUESTS
[   217.680] (II) Initializing built-in extension SYNC
[   217.680] (II) Initializing built-in extension XKEYBOARD
[   217.680] (II) Initializing built-in extension XC-MISC
[   217.680] (II) Initializing built-in extension SECURITY
[   217.680] (II) Initializing built-in extension XINERAMA
[   217.680] (II) Initializing built-in extension XFIXES
[   217.680] (II) Initializing built-in extension RENDER
[   217.680] (II) Initializing built-in extension RANDR
[   217.680] (II) Initializing built-in extension COMPOSITE
[   217.680] (II) Initializing built-in extension DAMAGE
[   217.687] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   217.687] (II) AIGLX: enabled GLX_INTEL_swap_event
[   217.687] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   217.687] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   217.687] (II) AIGLX: Loaded and initialized i965
[   217.687] (II) GLX: Initialized DRI2 GL provider for screen 0
[   217.688] (II) intel(0): Setting screen physical size to 270 x 203
[   217.796] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   217.796] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   217.797] (II) LoadModule: "evdev"
[   217.797] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   217.797] (II) Module evdev: vendor="X.Org Foundation"
[   217.797] 	compiled for 1.12.3.901, module version = 2.7.3
[   217.797] 	Module class: X.Org XInput Driver
[   217.797] 	ABI class: X.Org XInput driver, version 16.0
[   217.797] (II) Using input driver 'evdev' for 'Power Button'
[   217.797] (**) Power Button: always reports core events
[   217.797] (**) evdev: Power Button: Device: "/dev/input/event1"
[   217.797] (--) evdev: Power Button: Vendor 0 Product 0x1
[   217.797] (--) evdev: Power Button: Found keys
[   217.797] (II) evdev: Power Button: Configuring as keyboard
[   217.797] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[   217.797] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   217.797] (**) Option "xkb_rules" "evdev"
[   217.797] (**) Option "xkb_model" "evdev"
[   217.797] (**) Option "xkb_layout" "us"
[   217.823] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   217.823] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   217.823] (II) Using input driver 'evdev' for 'Power Button'
[   217.823] (**) Power Button: always reports core events
[   217.823] (**) evdev: Power Button: Device: "/dev/input/event0"
[   217.823] (--) evdev: Power Button: Vendor 0 Product 0x1
[   217.823] (--) evdev: Power Button: Found keys
[   217.823] (II) evdev: Power Button: Configuring as keyboard
[   217.823] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[   217.823] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   217.823] (**) Option "xkb_rules" "evdev"
[   217.823] (**) Option "xkb_model" "evdev"
[   217.823] (**) Option "xkb_layout" "us"
[   217.823] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event5)
[   217.823] (II) No input driver specified, ignoring this device.
[   217.823] (II) This device may have been added with another device file.
[   217.824] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event6)
[   217.824] (II) No input driver specified, ignoring this device.
[   217.824] (II) This device may have been added with another device file.
[   217.824] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event7)
[   217.824] (II) No input driver specified, ignoring this device.
[   217.824] (II) This device may have been added with another device file.
[   217.824] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event3)
[   217.824] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[   217.824] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[   217.824] (**) PixArt USB Optical Mouse: always reports core events
[   217.824] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event3"
[   217.824] (--) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
[   217.824] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[   217.824] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[   217.824] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[   217.824] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[   217.824] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[   217.824] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[   217.824] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[   217.824] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   217.824] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3/event3"
[   217.824] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 8)
[   217.824] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[   217.825] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[   217.825] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[   217.825] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[   217.825] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[   217.825] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0)
[   217.825] (II) No input driver specified, ignoring this device.
[   217.825] (II) This device may have been added with another device file.
[   217.825] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[   217.825] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   217.825] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   217.825] (**) AT Translated Set 2 keyboard: always reports core events
[   217.825] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[   217.825] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   217.825] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   217.825] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   217.825] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[   217.825] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[   217.825] (**) Option "xkb_rules" "evdev"
[   217.825] (**) Option "xkb_model" "evdev"
[   217.825] (**) Option "xkb_layout" "us"
[   217.826] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[   217.826] (II) No input driver specified, ignoring this device.
[   217.826] (II) This device may have been added with another device file.
[   217.943] (II) evdev: Power Button: Close
[   217.943] (II) UnloadModule: "evdev"
[   217.950] (II) evdev: Power Button: Close
[   217.950] (II) UnloadModule: "evdev"
[   217.960] (II) evdev: PixArt USB Optical Mouse: Close
[   217.960] (II) UnloadModule: "evdev"
[   217.960] (II) evdev: AT Translated Set 2 keyboard: Close
[   217.960] (II) UnloadModule: "evdev"
[   218.032] Server terminated successfully (0). Closing log file.

/var/log/pacman.log

[2012-10-08 15:50] Running 'pacman -Syu'
[2012-10-08 15:50] synchronizing package lists
[2012-10-08 15:50] starting full system upgrade
[2012-10-08 15:52] >>> Updating module dependencies. Please wait ...
[2012-10-08 15:52] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
[2012-10-08 15:52] ==> Building image from preset: 'default'
[2012-10-08 15:52]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-10-08 15:52] ==> Starting build: 3.5.6-1-ARCH
[2012-10-08 15:52]   -> Running build hook: [base]
[2012-10-08 15:52]   -> Running build hook: [udev]
[2012-10-08 15:52]   -> Running build hook: [autodetect]
[2012-10-08 15:52]   -> Running build hook: [pata]
[2012-10-08 15:52]   -> Running build hook: [scsi]
[2012-10-08 15:52]   -> Running build hook: [sata]
[2012-10-08 15:52]   -> Running build hook: [filesystems]
[2012-10-08 15:52]   -> Running build hook: [usbinput]
[2012-10-08 15:52]   -> Running build hook: [fsck]
[2012-10-08 15:52] ==> Generating module dependencies
[2012-10-08 15:52] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-10-08 15:52] ==> Image generation successful
[2012-10-08 15:52] ==> Building image from preset: 'fallback'
[2012-10-08 15:52]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-10-08 15:52] ==> Starting build: 3.5.6-1-ARCH
[2012-10-08 15:52]   -> Running build hook: [base]
[2012-10-08 15:52]   -> Running build hook: [udev]
[2012-10-08 15:52]   -> Running build hook: [pata]
[2012-10-08 15:52]   -> Running build hook: [scsi]
[2012-10-08 15:52]   -> Running build hook: [sata]
[2012-10-08 15:52]   -> Running build hook: [filesystems]
[2012-10-08 15:52]   -> Running build hook: [usbinput]
[2012-10-08 15:52]   -> Running build hook: [fsck]
[2012-10-08 15:52] ==> Generating module dependencies
[2012-10-08 15:52] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-10-08 15:52] ==> Image generation successful
[2012-10-08 15:52] upgraded linux (3.5.5-1 -> 3.5.6-1)
[2012-10-08 15:53] upgraded linux-headers (3.5.5-1 -> 3.5.6-1)
[2012-10-08 15:53] upgraded net-snmp (5.7.1-3 -> 5.7.1-4)
[2012-10-08 15:58] Running 'pacman -U linux-3.5.5-1-x86_64.pkg.tar.xz linux-headers-3.5.5-1-x86_64.pkg.tar.xz'
[2012-10-08 15:59] >>> Updating module dependencies. Please wait ...
[2012-10-08 15:59] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
[2012-10-08 15:59] ==> Building image from preset: 'default'
[2012-10-08 15:59]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-10-08 15:59] ==> Starting build: 3.5.5-1-ARCH
[2012-10-08 15:59]   -> Running build hook: [base]
[2012-10-08 15:59]   -> Running build hook: [udev]
[2012-10-08 15:59]   -> Running build hook: [autodetect]
[2012-10-08 15:59]   -> Running build hook: [pata]
[2012-10-08 15:59]   -> Running build hook: [scsi]
[2012-10-08 15:59]   -> Running build hook: [sata]
[2012-10-08 15:59]   -> Running build hook: [filesystems]
[2012-10-08 15:59]   -> Running build hook: [usbinput]
[2012-10-08 15:59]   -> Running build hook: [fsck]
[2012-10-08 15:59] ==> Generating module dependencies
[2012-10-08 15:59] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-10-08 15:59] ==> Image generation successful
[2012-10-08 15:59] ==> Building image from preset: 'fallback'
[2012-10-08 15:59]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-10-08 15:59] ==> Starting build: 3.5.5-1-ARCH
[2012-10-08 15:59]   -> Running build hook: [base]
[2012-10-08 15:59]   -> Running build hook: [udev]
[2012-10-08 15:59]   -> Running build hook: [pata]
[2012-10-08 15:59]   -> Running build hook: [scsi]
[2012-10-08 15:59]   -> Running build hook: [sata]
[2012-10-08 15:59]   -> Running build hook: [filesystems]
[2012-10-08 15:59]   -> Running build hook: [usbinput]
[2012-10-08 15:59]   -> Running build hook: [fsck]
[2012-10-08 15:59] ==> Generating module dependencies
[2012-10-08 15:59] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-10-08 15:59] ==> Image generation successful
[2012-10-08 15:59] upgraded linux (3.5.6-1 -> 3.5.5-1)
[2012-10-08 15:59] upgraded linux-headers (3.5.6-1 -> 3.5.5-1)

Last edited by GordonGR (2012-10-10 11:01:16)


Intel(R) Celeron(R) CPU E3400 @ 2.60GHz, 1878 MB, XFCE 4.12, x86_64. AURs.

“No one without the knowledge of geometry may enter.“ Plato.

Offline

#2 2012-10-10 11:00:47

GordonGR
Member
From: Thessaloniki, Greece
Registered: 2011-11-07
Posts: 242

Re: [SOLVED] Kernel 3.5.6 breaks X?

Apparently I hadn't installed linux-api-headers. Marking as solved.


Intel(R) Celeron(R) CPU E3400 @ 2.60GHz, 1878 MB, XFCE 4.12, x86_64. AURs.

“No one without the knowledge of geometry may enter.“ Plato.

Offline

Board footer

Powered by FluxBB