You are not logged in.

#1 2012-10-09 11:37:31

kerasi
Member
Registered: 2011-07-07
Posts: 39

[solved] ThinkPad connect with extern Monitor Problem

Hello community

I have installed arch on my T420 integrated HD 3000 and i have the Problem that when i start arch and the boot messages comes i can see the deamon starts ok,ok,ok who should be on the right side but on the NEC they was displayed 5 cm inside. Also when iam on the console and i type dmesg all the output scroll down and broke 5 cm from the roof. And when iam on openbox and i will maximize one window it would be maximized on the size from the Laptop LCD.
I have made an .xinitrc

#!/bin/sh
#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)

#xrandr --output DP2 --auto --output LVDS --right-of LVDS
#xrandr --output DP1 --auto --output LVDS --auto --same-as DP1
xrandr -d DP2 -s 1900x1200
if [ -d /etc/X11/xinit/xinitrc.d ]; then
  for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
  done
  unset f
fi

# exec gnome-session
# exec startkde
# exec startxfce4

and here is my Xorg.0.log

[    81.298] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    81.298] X Protocol Version 11, Revision 0
[    81.298] Build Operating System: Linux 3.4.8-1-ARCH x86_64 
[    81.298] Current Operating System: Linux bullitt 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64
[    81.298] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7b8780ba-278c-4d61-a1ec-ba2a6f96c6ba ro quiet
[    81.299] Build Date: 27 August 2012  08:04:39AM
[    81.299]  
[    81.299] Current version of pixman: 0.26.2
[    81.299] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    81.299] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    81.306] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct  7 16:33:34 2012
[    81.307] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    81.308] (==) No Layout section.  Using the first Screen section.
[    81.308] (==) No screen section available. Using defaults.
[    81.308] (**) |-->Screen "Default Screen Section" (0)
[    81.308] (**) |   |-->Monitor "<default monitor>"
[    81.308] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    81.308] (==) Automatically adding devices
[    81.308] (==) Automatically enabling devices
[    81.308] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    81.308] 	Entry deleted from font path.
[    81.308] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    81.308] 	Entry deleted from font path.
[    81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    81.308] 	Entry deleted from font path.
[    81.308] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    81.308] 	Entry deleted from font path.
[    81.308] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    81.308] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[    81.308] (==) ModulePath set to "/usr/lib/xorg/modules"
[    81.308] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    81.308] (II) Loader magic: 0x7c8b00
[    81.308] (II) Module ABI versions:
[    81.308] 	X.Org ANSI C Emulation: 0.4
[    81.308] 	X.Org Video Driver: 12.1
[    81.308] 	X.Org XInput driver : 16.0
[    81.308] 	X.Org Server Extension : 6.0
[    81.308] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[    81.308] (II) Open ACPI successful (/var/run/acpid.socket)
[    81.308] (II) LoadModule: "extmod"
[    81.309] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    81.309] (II) Module extmod: vendor="X.Org Foundation"
[    81.309] 	compiled for 1.12.4, module version = 1.0.0
[    81.309] 	Module class: X.Org Server Extension
[    81.309] 	ABI class: X.Org Server Extension, version 6.0
[    81.309] (II) Loading extension MIT-SCREEN-SAVER
[    81.309] (II) Loading extension XFree86-VidModeExtension
[    81.309] (II) Loading extension XFree86-DGA
[    81.309] (II) Loading extension DPMS
[    81.309] (II) Loading extension XVideo
[    81.309] (II) Loading extension XVideo-MotionCompensation
[    81.309] (II) Loading extension X-Resource
[    81.309] (II) LoadModule: "dbe"
[    81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    81.309] (II) Module dbe: vendor="X.Org Foundation"
[    81.309] 	compiled for 1.12.4, module version = 1.0.0
[    81.309] 	Module class: X.Org Server Extension
[    81.309] 	ABI class: X.Org Server Extension, version 6.0
[    81.309] (II) Loading extension DOUBLE-BUFFER
[    81.309] (II) LoadModule: "glx"
[    81.309] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    81.309] (II) Module glx: vendor="X.Org Foundation"
[    81.309] 	compiled for 1.12.4, module version = 1.0.0
[    81.309] 	ABI class: X.Org Server Extension, version 6.0
[    81.309] (==) AIGLX enabled
[    81.309] (II) Loading extension GLX
[    81.309] (II) LoadModule: "record"
[    81.309] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    81.309] (II) Module record: vendor="X.Org Foundation"
[    81.309] 	compiled for 1.12.4, module version = 1.13.0
[    81.309] 	Module class: X.Org Server Extension
[    81.309] 	ABI class: X.Org Server Extension, version 6.0
[    81.309] (II) Loading extension RECORD
[    81.309] (II) LoadModule: "dri"
[    81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    81.309] (II) Module dri: vendor="X.Org Foundation"
[    81.309] 	compiled for 1.12.4, module version = 1.0.0
[    81.309] 	ABI class: X.Org Server Extension, version 6.0
[    81.309] (II) Loading extension XFree86-DRI
[    81.309] (II) LoadModule: "dri2"
[    81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    81.309] (II) Module dri2: vendor="X.Org Foundation"
[    81.309] 	compiled for 1.12.4, module version = 1.2.0
[    81.309] 	ABI class: X.Org Server Extension, version 6.0
[    81.309] (II) Loading extension DRI2
[    81.309] (==) Matched intel as autoconfigured driver 0
[    81.309] (==) Matched vesa as autoconfigured driver 1
[    81.309] (==) Matched fbdev as autoconfigured driver 2
[    81.309] (==) Assigned the driver to the xf86ConfigLayout
[    81.309] (II) LoadModule: "intel"
[    81.310] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    81.310] (II) Module intel: vendor="X.Org Foundation"
[    81.310] 	compiled for 1.12.4, module version = 2.20.9
[    81.310] 	Module class: X.Org Video Driver
[    81.310] 	ABI class: X.Org Video Driver, version 12.1
[    81.310] (II) LoadModule: "vesa"
[    81.310] (WW) Warning, couldn't open module vesa
[    81.310] (II) UnloadModule: "vesa"
[    81.310] (II) Unloading vesa
[    81.310] (EE) Failed to load module "vesa" (module does not exist, 0)
[    81.310] (II) LoadModule: "fbdev"
[    81.310] (WW) Warning, couldn't open module fbdev
[    81.310] (II) UnloadModule: "fbdev"
[    81.310] (II) Unloading fbdev
[    81.310] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    81.310] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[    81.310] (--) using VT number 7

[    81.313] drmOpenDevice: node name is /dev/dri/card0
[    81.314] drmOpenDevice: open result is 8, (OK)
[    81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    81.314] drmOpenDevice: node name is /dev/dri/card0
[    81.314] drmOpenDevice: open result is 8, (OK)
[    81.314] drmOpenByBusid: drmOpenMinor returns 8
[    81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    81.314] drmOpenDevice: node name is /dev/dri/card0
[    81.314] drmOpenDevice: open result is 9, (OK)
[    81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    81.314] drmOpenDevice: node name is /dev/dri/card0
[    81.314] drmOpenDevice: open result is 9, (OK)
[    81.314] drmOpenByBusid: drmOpenMinor returns 9
[    81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    81.314] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    81.314] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    81.314] (==) intel(0): RGB weight 888
[    81.314] (==) intel(0): Default visual is TrueColor
[    81.314] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[    81.314] (**) intel(0): Relaxed fencing enabled
[    81.314] (**) intel(0): Wait on SwapBuffers? enabled
[    81.314] (**) intel(0): Triple buffering? enabled
[    81.314] (**) intel(0): Framebuffer tiled
[    81.315] (**) intel(0): Pixmaps tiled
[    81.315] (**) intel(0): 3D buffers tiled
[    81.315] (**) intel(0): SwapBuffers wait enabled
[    81.315] (==) intel(0): video overlay key set to 0x101fe
[    81.315] (II) intel(0): Output LVDS1 has no monitor section
[    81.315] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    81.315] (II) intel(0): Output VGA1 has no monitor section
[    81.340] (II) intel(0): Output HDMI1 has no monitor section
[    81.380] (II) intel(0): Output DP1 has no monitor section
[    81.393] (II) intel(0): Output HDMI2 has no monitor section
[    81.406] (II) intel(0): Output HDMI3 has no monitor section
[    81.464] (II) intel(0): Output DP2 has no monitor section
[    81.506] (II) intel(0): Output DP3 has no monitor section
[    81.507] (II) intel(0): EDID for output LVDS1
[    81.507] (II) intel(0): Manufacturer: AUO  Model: 213e  Serial#: 0
[    81.507] (II) intel(0): Year: 2010  Week: 33
[    81.507] (II) intel(0): EDID Version: 1.4
[    81.507] (II) intel(0): Digital Display Input
[    81.507] (II) intel(0): 6 bits per channel
[    81.507] (II) intel(0): Digital interface is undefined
[    81.507] (II) intel(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[    81.507] (II) intel(0): Gamma: 2.20
[    81.507] (II) intel(0): No DPMS capabilities specified
[    81.507] (II) intel(0): Supported color encodings: RGB 4:4:4 
[    81.507] (II) intel(0): First detailed timing is preferred mode
[    81.507] (II) intel(0): Preferred mode is native pixel format and refresh rate
[    81.507] (II) intel(0): redX: 0.610 redY: 0.350   greenX: 0.320 greenY: 0.560
[    81.507] (II) intel(0): blueX: 0.150 blueY: 0.130   whiteX: 0.313 whiteY: 0.329
[    81.507] (II) intel(0): Manufacturer's mask: 0
[    81.507] (II) intel(0): Supported detailed timing:
[    81.507] (II) intel(0): clock: 110.0 MHz   Image Size:  309 x 174 mm
[    81.507] (II) intel(0): h_active: 1600  h_sync: 1664  h_sync_end 1706 h_blank_end 2010 h_border: 0
[    81.507] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 906 v_blanking: 912 v_border: 0
[    81.507] (II) intel(0): Supported detailed timing:
[    81.507] (II) intel(0): clock: 73.3 MHz   Image Size:  309 x 174 mm
[    81.507] (II) intel(0): h_active: 1600  h_sync: 1664  h_sync_end 1706 h_blank_end 2010 h_border: 0
[    81.507] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 906 v_blanking: 912 v_border: 0
[    81.507] (II) intel(0):  AUO
[    81.507] (II) intel(0):  B140RW02 V1
[    81.507] (II) intel(0): EDID (in hex):
[    81.507] (II) intel(0): 	00ffffffffffff0006af3e2100000000
[    81.507] (II) intel(0): 	21140104901f11780261959c59528f26
[    81.507] (II) intel(0): 	21505400000001010101010101010101
[    81.507] (II) intel(0): 	010101010101f82a409a61840c30402a
[    81.507] (II) intel(0): 	330035ae10000018a51c409a61840c30
[    81.507] (II) intel(0): 	402a330035ae10000018000000fe0041
[    81.507] (II) intel(0): 	554f0a202020202020202020000000fe
[    81.507] (II) intel(0): 	004231343052573032205631200a00d0
[    81.507] (II) intel(0): EDID vendor "AUO", prod id 8510
[    81.507] (II) intel(0): Printing DDC gathered Modelines:
[    81.508] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[    81.508] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[    81.508] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    81.508] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    81.508] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    81.508] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    81.508] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    81.508] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    81.508] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    81.508] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    81.508] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    81.508] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    81.508] (II) intel(0): Printing probed modes for output LVDS1
[    81.508] (II) intel(0): Modeline "1600x900"x60.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[    81.508] (II) intel(0): Modeline "1600x900"x40.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[    81.508] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    81.508] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    81.508] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    81.508] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    81.508] (II) intel(0): EDID for output VGA1
[    81.533] (II) intel(0): EDID for output HDMI1
[    81.573] (II) intel(0): EDID for output DP1
[    81.586] (II) intel(0): EDID for output HDMI2
[    81.600] (II) intel(0): EDID for output HDMI3
[    81.657] (II) intel(0): EDID for output DP2
[    81.657] (II) intel(0): Manufacturer: NEC  Model: 67d1  Serial#: 0
[    81.657] (II) intel(0): Year: 2011  Week: 33
[    81.657] (II) intel(0): EDID Version: 1.4
[    81.657] (II) intel(0): Digital Display Input
[    81.657] (II) intel(0): 10 bits per channel
[    81.657] (II) intel(0): Digital interface is DisplayPort
[    81.657] (II) intel(0): Max Image Size [cm]: horiz.: 52  vert.: 32
[    81.657] (II) intel(0): Gamma: 2.20
[    81.657] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[    81.657] (II) intel(0): Supported color encodings: RGB 4:4:4 
[    81.657] (II) intel(0): First detailed timing is preferred mode
[    81.657] (II) intel(0): Preferred mode is native pixel format and refresh rate
[    81.657] (II) intel(0): redX: 0.679 redY: 0.310   greenX: 0.210 greenY: 0.686
[    81.657] (II) intel(0): blueX: 0.149 blueY: 0.047   whiteX: 0.313 whiteY: 0.329
[    81.657] (II) intel(0): Supported established timings:
[    81.657] (II) intel(0): 720x400@70Hz
[    81.657] (II) intel(0): 640x480@60Hz
[    81.657] (II) intel(0): 640x480@67Hz
[    81.657] (II) intel(0): 640x480@72Hz
[    81.657] (II) intel(0): 640x480@75Hz
[    81.657] (II) intel(0): 800x600@56Hz
[    81.657] (II) intel(0): 800x600@60Hz
[    81.657] (II) intel(0): 800x600@72Hz
[    81.657] (II) intel(0): 800x600@75Hz
[    81.657] (II) intel(0): 832x624@75Hz
[    81.657] (II) intel(0): 1024x768@60Hz
[    81.657] (II) intel(0): 1024x768@70Hz
[    81.657] (II) intel(0): 1024x768@75Hz
[    81.657] (II) intel(0): 1280x1024@75Hz
[    81.657] (II) intel(0): 1152x864@75Hz
[    81.657] (II) intel(0): Manufacturer's mask: 0
[    81.657] (II) intel(0): Supported standard timings:
[    81.657] (II) intel(0): #0: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    81.657] (II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    81.657] (II) intel(0): #2: hsize: 1400  vsize 1050  refresh: 60  vid: 16528
[    81.657] (II) intel(0): #3: hsize: 1360  vsize 765  refresh: 60  vid: 49291
[    81.657] (II) intel(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    81.657] (II) intel(0): #5: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    81.657] (II) intel(0): #6: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    81.657] (II) intel(0): #7: hsize: 1920  vsize 1200  refresh: 60  vid: 209
[    81.657] (II) intel(0): Supported detailed timing:
[    81.657] (II) intel(0): clock: 154.0 MHz   Image Size:  518 x 324 mm
[    81.657] (II) intel(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    81.657] (II) intel(0): v_active: 1200  v_sync: 1203  v_sync_end 1209 v_blanking: 1235 v_border: 0
[    81.657] (II) intel(0): Ranges: V min: 50 V max: 85 Hz, H min: 31 H max: 92 kHz, PixClock max 165 MHz
[    81.657] (II) intel(0): Monitor name: PA241W
[    81.657] (II) intel(0): Serial No: 18107120UB
[    81.657] (II) intel(0): EDID (in hex):
[    81.657] (II) intel(0): 	00ffffffffffff0038a3d16700000000
[    81.657] (II) intel(0): 	21150104b5342078e2de45ad4f35af26
[    81.657] (II) intel(0): 	0c5054bfef8081c0818090408bc09500
[    81.657] (II) intel(0): 	a940b300d100283c80a070b023403020
[    81.657] (II) intel(0): 	360006442100001a000000fd0032551f
[    81.657] (II) intel(0): 	5c10000a202020202020000000fc0050
[    81.657] (II) intel(0): 	41323431570a202020202020000000ff
[    81.657] (II) intel(0): 	00313831303731323055420a2020004b
[    81.657] (II) intel(0): Printing probed modes for output DP2
[    81.657] (II) intel(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[    81.657] (II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    81.657] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    81.657] (II) intel(0): Modeline "1680x945"x60.0  131.48  1680 1784 1960 2240  945 946 949 978 -hsync +vsync (58.7 kHz)
[    81.657] (II) intel(0): Modeline "1400x1050"x74.9  156.00  1400 1504 1648 1896  1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
[    81.657] (II) intel(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[    81.657] (II) intel(0): Modeline "1600x900"x60.0  118.96  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
[    81.657] (II) intel(0): Modeline "1280x1024"x85.0  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync (91.1 kHz e)
[    81.657] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    81.657] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    81.657] (II) intel(0): Modeline "1440x900"x84.8  157.00  1440 1544 1696 1952  900 903 909 948 -hsync +vsync (80.4 kHz e)
[    81.657] (II) intel(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz e)
[    81.657] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    81.657] (II) intel(0): Modeline "1280x960"x85.0  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync (85.9 kHz e)
[    81.657] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    81.657] (II) intel(0): Modeline "1360x768"x59.8   84.75  1366 1431 1567 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
[    81.657] (II) intel(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[    81.657] (II) intel(0): Modeline "1280x800"x84.9  122.50  1280 1360 1496 1712  800 803 809 843 -hsync +vsync (71.6 kHz e)
[    81.657] (II) intel(0): Modeline "1280x800"x74.9  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz e)
[    81.657] (II) intel(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz e)
[    81.657] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    81.657] (II) intel(0): Modeline "1280x768"x84.8  117.50  1280 1360 1496 1712  768 771 778 809 -hsync +vsync (68.6 kHz e)
[    81.657] (II) intel(0): Modeline "1280x768"x74.9  102.25  1280 1360 1488 1696  768 771 778 805 +hsync -vsync (60.3 kHz e)
[    81.657] (II) intel(0): Modeline "1280x768"x59.9   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[    81.657] (II) intel(0): Modeline "1280x720"x60.0   74.44  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.7 kHz)
[    81.658] (II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz e)
[    81.658] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[    81.658] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    81.658] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    81.658] (II) intel(0): Modeline "1024x576"x60.0   46.97  1024 1064 1168 1312  576 577 580 597 -hsync +vsync (35.8 kHz)
[    81.658] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    81.658] (II) intel(0): Modeline "800x600"x85.1   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz e)
[    81.658] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    81.658] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    81.658] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    81.658] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    81.658] (II) intel(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    81.658] (II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz e)
[    81.658] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[    81.658] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    81.658] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    81.658] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    81.658] (II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz e)
[    81.658] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    81.658] (II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz e)
[    81.658] (II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz e)
[    81.700] (II) intel(0): EDID for output DP3
[    81.700] (II) intel(0): Output LVDS1 connected
[    81.700] (II) intel(0): Output VGA1 disconnected
[    81.700] (II) intel(0): Output HDMI1 disconnected
[    81.700] (II) intel(0): Output DP1 disconnected
[    81.700] (II) intel(0): Output HDMI2 disconnected
[    81.700] (II) intel(0): Output HDMI3 disconnected
[    81.700] (II) intel(0): Output DP2 connected
[    81.700] (II) intel(0): Output DP3 disconnected
[    81.700] (II) intel(0): Using exact sizes for initial modes
[    81.700] (II) intel(0): Output LVDS1 using initial mode 1600x900
[    81.700] (II) intel(0): Output DP2 using initial mode 1600x900
[    81.700] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    81.700] (II) intel(0): Kernel page flipping support detected, enabling
[    81.700] (**) intel(0): Display dimensions: (310, 170) mm
[    81.700] (**) intel(0): DPI set to (131, 134)
[    81.700] (II) Loading sub module "fb"
[    81.700] (II) LoadModule: "fb"
[    81.701] (II) Loading /usr/lib/xorg/modules/libfb.so
[    81.701] (II) Module fb: vendor="X.Org Foundation"
[    81.701] 	compiled for 1.12.4, module version = 1.0.0
[    81.701] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    81.701] (II) Loading sub module "dri2"
[    81.701] (II) LoadModule: "dri2"
[    81.701] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    81.701] (II) Module dri2: vendor="X.Org Foundation"
[    81.701] 	compiled for 1.12.4, module version = 1.2.0
[    81.701] 	ABI class: X.Org Server Extension, version 6.0
[    81.701] (==) Depth 24 pixmap format is 32 bpp
[    81.702] (II) intel(0): [DRI2] Setup complete
[    81.702] (II) intel(0): [DRI2]   DRI driver: i965
[    81.702] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
[    81.704] (II) UXA(0): Driver registered support for the following operations:
[    81.704] (II)         solid
[    81.704] (II)         copy
[    81.704] (II)         composite (RENDER acceleration)
[    81.704] (II)         put_image
[    81.704] (II)         get_image
[    81.704] (==) intel(0): Backing store disabled
[    81.704] (==) intel(0): Silken mouse enabled
[    81.704] (II) intel(0): Initializing HW Cursor
[    81.704] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    81.707] (==) intel(0): DPMS enabled
[    81.707] (==) intel(0): Intel XvMC decoder enabled
[    81.707] (II) intel(0): Set up textured video
[    81.707] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    81.707] (II) intel(0): direct rendering: DRI2 Enabled
[    81.707] (==) intel(0): hotplug detection: "enabled"
[    82.106] (--) RandR disabled
[    82.107] (II) Initializing built-in extension Generic Event Extension
[    82.107] (II) Initializing built-in extension SHAPE
[    82.107] (II) Initializing built-in extension MIT-SHM
[    82.107] (II) Initializing built-in extension XInputExtension
[    82.107] (II) Initializing built-in extension XTEST
[    82.107] (II) Initializing built-in extension BIG-REQUESTS
[    82.107] (II) Initializing built-in extension SYNC
[    82.107] (II) Initializing built-in extension XKEYBOARD
[    82.107] (II) Initializing built-in extension XC-MISC
[    82.107] (II) Initializing built-in extension SECURITY
[    82.107] (II) Initializing built-in extension XINERAMA
[    82.107] (II) Initializing built-in extension XFIXES
[    82.107] (II) Initializing built-in extension RENDER
[    82.107] (II) Initializing built-in extension RANDR
[    82.107] (II) Initializing built-in extension COMPOSITE
[    82.107] (II) Initializing built-in extension DAMAGE
[    82.119] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    82.119] (II) AIGLX: enabled GLX_INTEL_swap_event
[    82.119] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    82.119] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    82.119] (II) AIGLX: Loaded and initialized i965
[    82.119] (II) GLX: Initialized DRI2 GL provider for screen 0
[    82.119] (II) intel(0): Setting screen physical size to 423 x 238
[    82.158] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    82.158] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    82.158] (II) LoadModule: "evdev"
[    82.159] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    82.159] (II) Module evdev: vendor="X.Org Foundation"
[    82.159] 	compiled for 1.12.3.901, module version = 2.7.3
[    82.159] 	Module class: X.Org XInput Driver
[    82.159] 	ABI class: X.Org XInput driver, version 16.0
[    82.159] (II) Using input driver 'evdev' for 'Power Button'
[    82.159] (**) Power Button: always reports core events
[    82.159] (**) evdev: Power Button: Device: "/dev/input/event4"
[    82.159] (--) evdev: Power Button: Vendor 0 Product 0x1
[    82.159] (--) evdev: Power Button: Found keys
[    82.159] (II) evdev: Power Button: Configuring as keyboard
[    82.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    82.160] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    82.160] (**) Option "xkb_rules" "evdev"
[    82.160] (**) Option "xkb_model" "evdev"
[    82.160] (**) Option "xkb_layout" "de"
[    82.160] (**) Option "xkb_variant" "nodeadkeys"
[    82.193] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    82.193] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    82.193] (II) Using input driver 'evdev' for 'Video Bus'
[    82.193] (**) Video Bus: always reports core events
[    82.193] (**) evdev: Video Bus: Device: "/dev/input/event12"
[    82.193] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    82.193] (--) evdev: Video Bus: Found keys
[    82.193] (II) evdev: Video Bus: Configuring as keyboard
[    82.193] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
[    82.193] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    82.193] (**) Option "xkb_rules" "evdev"
[    82.193] (**) Option "xkb_model" "evdev"
[    82.193] (**) Option "xkb_layout" "de"
[    82.193] (**) Option "xkb_variant" "nodeadkeys"
[    82.195] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    82.195] (II) No input driver specified, ignoring this device.
[    82.195] (II) This device may have been added with another device file.
[    82.195] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    82.195] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    82.195] (II) Using input driver 'evdev' for 'Sleep Button'
[    82.195] (**) Sleep Button: always reports core events
[    82.195] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    82.195] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    82.195] (--) evdev: Sleep Button: Found keys
[    82.195] (II) evdev: Sleep Button: Configuring as keyboard
[    82.195] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[    82.195] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    82.195] (**) Option "xkb_rules" "evdev"
[    82.196] (**) Option "xkb_model" "evdev"
[    82.196] (**) Option "xkb_layout" "de"
[    82.196] (**) Option "xkb_variant" "nodeadkeys"
[    82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[    82.197] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[    82.197] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[    82.197] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[    82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[    82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01e
[    82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[    82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[    82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[    82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[    82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[    82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[    82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[    82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[    82.197] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[    82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[    82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[    82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[    82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[    82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[    82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[    82.197] (II) No input driver specified, ignoring this device.
[    82.197] (II) This device may have been added with another device file.
[    82.197] (II) config/udev: Adding input device Integrated Camera (/dev/input/event10)
[    82.197] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[    82.197] (II) Using input driver 'evdev' for 'Integrated Camera'
[    82.197] (**) Integrated Camera: always reports core events
[    82.197] (**) evdev: Integrated Camera: Device: "/dev/input/event10"
[    82.197] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb221
[    82.197] (--) evdev: Integrated Camera: Found keys
[    82.197] (II) evdev: Integrated Camera: Configuring as keyboard
[    82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10/event10"
[    82.197] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[    82.197] (**) Option "xkb_rules" "evdev"
[    82.197] (**) Option "xkb_model" "evdev"
[    82.197] (**) Option "xkb_layout" "de"
[    82.197] (**) Option "xkb_variant" "nodeadkeys"
[    82.198] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[    82.198] (II) No input driver specified, ignoring this device.
[    82.198] (II) This device may have been added with another device file.
[    82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[    82.198] (II) No input driver specified, ignoring this device.
[    82.198] (II) This device may have been added with another device file.
[    82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[    82.198] (II) No input driver specified, ignoring this device.
[    82.198] (II) This device may have been added with another device file.
[    82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[    82.198] (II) No input driver specified, ignoring this device.
[    82.198] (II) This device may have been added with another device file.
[    82.198] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event17)
[    82.198] (II) No input driver specified, ignoring this device.
[    82.198] (II) This device may have been added with another device file.
[    82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event18)
[    82.198] (II) No input driver specified, ignoring this device.
[    82.198] (II) This device may have been added with another device file.
[    82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event19)
[    82.198] (II) No input driver specified, ignoring this device.
[    82.198] (II) This device may have been added with another device file.
[    82.198] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)
[    82.198] (II) No input driver specified, ignoring this device.
[    82.198] (II) This device may have been added with another device file.
[    82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event5)
[    82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
[    82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
[    82.199] (**) HID 046a:0101: always reports core events
[    82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event5"
[    82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[    82.199] (--) evdev: HID 046a:0101: Found keys
[    82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
[    82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5/event5"
[    82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 11)
[    82.199] (**) Option "xkb_rules" "evdev"
[    82.199] (**) Option "xkb_model" "evdev"
[    82.199] (**) Option "xkb_layout" "de"
[    82.199] (**) Option "xkb_variant" "nodeadkeys"
[    82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event7)
[    82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
[    82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
[    82.199] (**) HID 046a:0101: always reports core events
[    82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event7"
[    82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[    82.199] (--) evdev: HID 046a:0101: Found 1 mouse buttons
[    82.199] (--) evdev: HID 046a:0101: Found scroll wheel(s)
[    82.199] (--) evdev: HID 046a:0101: Found relative axes
[    82.199] (II) evdev: HID 046a:0101: Forcing relative x/y axes to exist.
[    82.199] (--) evdev: HID 046a:0101: Found absolute axes
[    82.199] (II) evdev: HID 046a:0101: Forcing absolute x/y axes to exist.
[    82.199] (--) evdev: HID 046a:0101: Found keys
[    82.199] (II) evdev: HID 046a:0101: Configuring as mouse
[    82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
[    82.199] (II) evdev: HID 046a:0101: Adding scrollwheel support
[    82.199] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
[    82.199] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input7/event7"
[    82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 12)
[    82.199] (**) Option "xkb_rules" "evdev"
[    82.199] (**) Option "xkb_model" "evdev"
[    82.199] (**) Option "xkb_layout" "de"
[    82.199] (**) Option "xkb_variant" "nodeadkeys"
[    82.199] (II) evdev: HID 046a:0101: initialized for relative axes.
[    82.199] (WW) evdev: HID 046a:0101: ignoring absolute axes.
[    82.199] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
[    82.199] (**) HID 046a:0101: (accel) acceleration profile 0
[    82.199] (**) HID 046a:0101: (accel) acceleration factor: 2.000
[    82.199] (**) HID 046a:0101: (accel) acceleration threshold: 4
[    82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event8)
[    82.200] (**) HID 046a:0101: Applying InputClass "evdev pointer catchall"
[    82.200] (II) Using input driver 'evdev' for 'HID 046a:0101'
[    82.200] (**) HID 046a:0101: always reports core events
[    82.200] (**) evdev: HID 046a:0101: Device: "/dev/input/event8"
[    82.200] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[    82.200] (--) evdev: HID 046a:0101: Found 9 mouse buttons
[    82.200] (--) evdev: HID 046a:0101: Found scroll wheel(s)
[    82.200] (--) evdev: HID 046a:0101: Found relative axes
[    82.200] (--) evdev: HID 046a:0101: Found x and y relative axes
[    82.200] (II) evdev: HID 046a:0101: Configuring as mouse
[    82.200] (II) evdev: HID 046a:0101: Adding scrollwheel support
[    82.200] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
[    82.200] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    82.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/input/input8/event8"
[    82.200] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: MOUSE, id 13)
[    82.200] (II) evdev: HID 046a:0101: initialized for relative axes.
[    82.200] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
[    82.200] (**) HID 046a:0101: (accel) acceleration profile 0
[    82.200] (**) HID 046a:0101: (accel) acceleration factor: 2.000
[    82.200] (**) HID 046a:0101: (accel) acceleration threshold: 4
[    82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/mouse1)
[    82.200] (II) No input driver specified, ignoring this device.
[    82.200] (II) This device may have been added with another device file.
[    82.200] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    82.200] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    82.200] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    82.200] (**) AT Translated Set 2 keyboard: always reports core events
[    82.200] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    82.200] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    82.200] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    82.200] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    82.200] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    82.200] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[    82.200] (**) Option "xkb_rules" "evdev"
[    82.200] (**) Option "xkb_model" "evdev"
[    82.200] (**) Option "xkb_layout" "de"
[    82.200] (**) Option "xkb_variant" "nodeadkeys"
[    82.201] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[    82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    82.201] (II) LoadModule: "synaptics"
[    82.201] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    82.201] (II) Module synaptics: vendor="X.Org Foundation"
[    82.201] 	compiled for 1.12.2, module version = 1.6.2
[    82.201] 	Module class: X.Org XInput Driver
[    82.201] 	ABI class: X.Org XInput driver, version 16.0
[    82.201] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    82.201] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    82.201] (**) Option "Device" "/dev/input/event11"
[    82.203] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[    82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
[    82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    82.203] (**) Option "TapButton1" "1"
[    82.203] (**) Option "TapButton2" "2"
[    82.203] (**) Option "TapButton3" "3"
[    82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    82.203] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[    82.204] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[    82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[    82.204] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    82.204] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    82.204] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[    82.204] (II) No input driver specified, ignoring this device.
[    82.204] (II) This device may have been added with another device file.
[    82.204] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event21)
[    82.204] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[    82.204] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[    82.204] (**) TPPS/2 IBM TrackPoint: always reports core events
[    82.204] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event21"
[    82.204] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[    82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[    82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[    82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[    82.204] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[    82.204] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[    82.204] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input21/event21"
[    82.204] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16)
[    82.205] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[    82.205] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[    82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[    82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    82.205] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[    82.205] (II) No input driver specified, ignoring this device.
[    82.205] (II) This device may have been added with another device file.
[    82.205] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    82.205] (II) No input driver specified, ignoring this device.
[    82.205] (II) This device may have been added with another device file.
[    82.205] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
[    82.205] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[    82.205] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[    82.205] (**) ThinkPad Extra Buttons: always reports core events
[    82.205] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
[    82.205] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[    82.205] (--) evdev: ThinkPad Extra Buttons: Found keys
[    82.205] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[    82.205] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event9"
[    82.205] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)
[    82.205] (**) Option "xkb_rules" "evdev"
[    82.205] (**) Option "xkb_model" "evdev"
[    82.205] (**) Option "xkb_layout" "de"
[    82.205] (**) Option "xkb_variant" "nodeadkeys"
[    82.222] (II) intel(0): EDID vendor "AUO", prod id 8510
[    82.222] (II) intel(0): Printing DDC gathered Modelines:
[    82.222] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[    82.222] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[    82.415] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled
[   106.807] (II) AIGLX: Suspending AIGLX clients for VT switch
[   117.740] (II) Open ACPI successful (/var/run/acpid.socket)
[   117.740] (II) AIGLX: Resuming AIGLX clients after VT switch
[   117.767] (II) intel(0): EDID vendor "AUO", prod id 8510
[   117.767] (II) intel(0): Printing DDC gathered Modelines:
[   117.767] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[   117.767] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[   117.959] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found

I have connect my ThinkPad per Dockingstation Displayport (I try also DVI) with an NEC PA241W. It seems arch takes the 1600x900 resolution from the Laptop :-(
I dont know what to do makes the Kernel the Problem?
On my second PC i have there an Nvidia when i start arch for install all are perfect on my NEC i connected it with DVI


here is my xrandr

[frank@bullitt ~]$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 8192 x 8192
LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
   1600x900       60.0*+   40.0  
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
   1920x1200      60.0*+
   1600x1200      60.0  
   1680x1050      60.0  
   1680x945       60.0  
   1400x1050      74.9     60.0  
   1600x900       60.0  
   1280x1024      85.0     75.0     60.0  
   1440x900       84.8     75.0     59.9  
   1280x960       85.0     60.0  
   1360x768       59.8     60.0  
   1280x800       84.9     74.9     59.8  
   1152x864       75.0  
   1280x768       84.8     74.9     59.9  
   1280x720       60.0  
   1024x768       85.0     75.1     70.1     60.0  
   1024x576       60.0  
   832x624        74.6  
   800x600        85.1     72.2     75.0     60.3     56.2  
   848x480        60.0  
   640x480        85.0     72.8     75.0     66.7     60.0  
   720x400        85.0     70.1  
   640x400        85.1  
   640x350        85.1  
DP3 disconnected (normal left inverted right x axis y axis)

Does anybody have the same kind of connected an Laptop with an external Monitor and knows what was the Problem?
I like arch very much but so it doesnt make fun :-(

I hope someone can help me

the picture shows openbox with the Thunar maximized

Last edited by kerasi (2012-10-12 23:12:12)

Offline

#2 2012-10-09 11:49:06

Trilby
Forum Moderator
From: Massachusetts, USA
Registered: 2011-11-29
Posts: 14,812
Website

Re: [solved] ThinkPad connect with extern Monitor Problem

Kerasi, this is difficult to understand.  It sounds like you have tried many settings, and none of them acheived what you want - but it is not at all clear which attempts resulted in which outcomes.

Can you briefly describe the desired outcome?  Do you want both screens to be used, or just one?  Is LVDS1 the internal monitor and DP2 is the external?

Also, please resize that screenshot to fit with forum guidelines.  You can put a thumbnail here that links to the fullsize image if you think it will still be useful.


InterrobangSlider
• How's my coding? See this page.
• How's my moderating? Feel free to email any concerns, complaints, or objections.

Offline

#3 2012-10-09 12:32:33

kerasi
Member
Registered: 2011-07-07
Posts: 39

Re: [solved] ThinkPad connect with extern Monitor Problem

hi Trilby

i will use both screens. When i am at home i will have docked my Laptop and connect it with my NEC per Displayport and when iam at work i will use no dock only my Laptop i hope i described it good sorry for my english.

LVDS1 is the internal Monitor and DP2 ist the connection with my external.

Yes i tried many settings but nothing helped.
i tried it also on my PC its not a laptop and there it works perfect it was used all the size of the external monitor 1920x1200

I will describe it again when you boot for examble first time arch for installation and the boot screen comes you cant see the ok messages for the deamons at the reight side you see them so ca 5 cm more left and i think he takes the resoltution from my internal Monitor. The letters are sharp but not fit the full external Monitor.

my goal will be when iam at home i will have my laptop connect in the dockingstation per Displayport with my external Monitor and use only the big one.
and when iam at work or away i will use only the internal monitor.

how can i put a thumbnail with what syntax?

I hope i described my problem well.

so i have to go to work

Last edited by kerasi (2012-10-09 12:43:11)

Offline

#4 2012-10-09 15:34:29

Trilby
Forum Moderator
From: Massachusetts, USA
Registered: 2011-11-29
Posts: 14,812
Website

Re: [solved] ThinkPad connect with extern Monitor Problem

Yes, that makes it more clear.

I don't know how to get the proper resolutions in early userspace to see the init messages properly.

Once in X, however, the following should work:

#    When docked:
xrandr --output LVDS1 --auto --output DP2 --auto --right-of LVDS1

#    When not docked:
xrandr --output LVDS1 --auto --output DP2 --off

If you unplug DP2 before using the undocked version, then the DP2 --off isn't necessary.  But this would make it easier to change the screen settings before unplugging.


InterrobangSlider
• How's my coding? See this page.
• How's my moderating? Feel free to email any concerns, complaints, or objections.

Offline

#5 2012-10-09 16:39:49

WonderWoofy
Member
From: Los Gatos, CA
Registered: 2012-05-19
Posts: 8,412

Re: [solved] ThinkPad connect with extern Monitor Problem

Yes, it sounds like you are trying to mirror the display, which of course will result in the lower resulotion for both monitors.  So maybe you need to turn off LVDS1?

Offline

#6 2012-10-09 21:23:09

David Batson
Member
Registered: 2011-10-13
Posts: 640

Re: [solved] ThinkPad connect with extern Monitor Problem

Here is a little script that I used to use with a ThinkPad and an external monitor.  You may be able to edit it to apply to your situation, or at least find some useful bits in there.  I assigned a hotkey combo to run the script.

#!/bin/sh

statusvga=`xrandr -q | grep 1024x768* | grep VGA-0 | cut -c1-5`
statuslvds=`xrandr -q | grep "1400x1050*\|1024x768*" | grep LVDS | cut -c1-4`

if [ "$statusvga" != "VGA-0" ] && [ "$statuslvds" == "LVDS" ] ; then
   xrandr --output LVDS --mode 1400x1050 --output VGA-0 --auto --right-of LVDS
fi
if [ "$statusvga" == "VGA-0" ] && [ "$statuslvds" == "LVDS" ] ; then
   xrandr --output LVDS --off
fi
if [ "$statusvga" == "VGA-0" ] && [ "$statuslvds" != "LVDS" ] ; then
   xrandr --output LVDS --mode 1400x1050 --output VGA-0 --off
fi
exit

Offline

#7 2012-10-09 23:50:56

kerasi
Member
Registered: 2011-07-07
Posts: 39

Re: [solved] ThinkPad connect with extern Monitor Problem

first thank you all for the answers and help
@ trilby
when i put this into my .xinitrc

#    When docked:
xrandr --output LVDS1 --auto --output DP2 --auto --right-of LVDS1

the monitor switches to 1920x1200 but i cannot see my mouse pointer

@david
how would your script look like with my situation can you change it to work with my hardware?

what i also not understand is why is the Displayport called DP2 my external Monitor has only 1 of them and 2 DVI and the dock has also only one

how can i see if i have installed the right driver?

Last edited by kerasi (2012-10-10 00:14:47)

Offline

#8 2012-10-10 10:54:49

David Batson
Member
Registered: 2011-10-13
Posts: 640

Re: [solved] ThinkPad connect with extern Monitor Problem

kerasi wrote:

the monitor switches to 1920x1200 but i cannot see my mouse pointer

Have you tried moving the mouse cursor on your laptop past the left edge or right edge of the display?  Does the mouse then show up on the external display?  If so, then you are using a big virtual display that encompasses both displays (as one large desktop).  You will not see this happen with cloned or mirrored displays.

Offline

#9 2012-10-10 11:05:42

Trilby
Forum Moderator
From: Massachusetts, USA
Registered: 2011-11-29
Posts: 14,812
Website

Re: [solved] ThinkPad connect with extern Monitor Problem

Yup, that line will make a big virtual desktop spread accross the two screens - I thought that's what was desired.

There is no way to mirror displays and have optimal resolution on both.  You can have optimal resolution on both with an extended desktop mode, or you can have mirrored displays with sub-optimal resolution on at least one monitor and/or deadspace or lost space on one monitor.


InterrobangSlider
• How's my coding? See this page.
• How's my moderating? Feel free to email any concerns, complaints, or objections.

Offline

#10 2012-10-10 11:25:23

kerasi
Member
Registered: 2011-07-07
Posts: 39

Re: [solved] ThinkPad connect with extern Monitor Problem

@david
so i take this code

xrandr --output LVDS1 --auto --output DP2 --auto --right-of LVDS1

so I opend my laptop and i start x.
the external switches to the right size smile
on the laptop it was also right size smile

i cant see the mouse on the external but when i move the mouse pointing on the external right enough i see the mouse pointer on it
and when i move the opened programs that i could see on my laptop monitor to the right then i could see them on the external and i can resize them to full side

but how can i do this without opend my laptop monitor to move programs?

@trilby
so so i underatand this right it give no way to solve this?
when i install a full enviroment i can choose what display should taken so it ws on lubuntu does it than work? if yes it would be sad tha t it dont work with openbox or another windowmanager

Offline

#11 2012-10-10 12:07:49

kerasi
Member
Registered: 2011-07-07
Posts: 39

Re: [solved] ThinkPad connect with extern Monitor Problem

so i found this in the internet
use this:

/etc/udev/rules.d/10-local.rules

KERNEL=="card0", ACTION=="change", ENV{XAUTHORITY}="/home/<user>/.Xauthority", ENV{DISPLAY}=":0.0", RUN+="/path/to/hdmi-script.sh"

hdmi-script.sh

#!/bin/bash

if [[ $(< /sys/class/drm/card0-HDMI-A-1/status) = "connected" ]]; then
	xrandr --output HDMI-1 --primary --auto --output LVDS-1 --auto --left-of HDMI-1
else
	xrandr --auto
fi

and i tried this

xrandr --output DP2 --primary --auto --output LVDS1 --auto --right-of DP2

when i start now x the mpouse pointer  centered right but i can see on the external all the opened programs when i open the laptop display i see nothing i have to move now from the external the windows right and then i can see them on the laptop.

is this right so or is this script good what i find?

Last edited by kerasi (2012-10-10 12:14:46)

Offline

#12 2012-10-10 15:08:06

ANOKNUSA
Member
Registered: 2010-10-22
Posts: 2,141

Re: [solved] ThinkPad connect with extern Monitor Problem

If I understand you correctly, the reason the windows are opening on the external monitor is because it's set as the primary display. If you're trying to use an extended desktop, the idea behind that option is that one monitor is the one you do most of your work on, while the other is simply a secondary display for windows you want to see, but don't want cluttering your workspace (such as notes or a .pdf viewer or something).  The second monitor is like a stack of papers sitting in the corner of your desk, while separate displays are like a desk and a neatly arranged shelf on/next to/above your desk.  In order to get certain windows to open in certain screens (or the screen that has focus), you'll need to use a setup in which each screen is distinct from the other.  Here are the settings I use:

xrandr --output LVDS1 --mode 1366x768 --pos 0x900 --rotate normal --output VGA1 --mode 1440x900 --pos 0x0 --rotate normal

I stuck that in a script to run when I start X; if the external monitor isn't plugged in, only the laptop display is used.  This sets each screen to act as a seperate display; I can still drag windows between them if I wish, as well as assign windows to open on one screen or the other through DWM's configuration file.  As mentioned earlier, this is also the only way (I think) to get each screen to display at its native resolution.  Note that I specify the resolution for both my T520 LCD and my external monitor, and specify their positions (my external is mounted to the wall above my desk, directly above my laptop); change those as necessary.

EDIT: Thought of a better analogy. wink

Last edited by ANOKNUSA (2012-10-10 15:11:46)

Offline

#13 2012-10-10 15:26:14

Trilby
Forum Moderator
From: Massachusetts, USA
Registered: 2011-11-29
Posts: 14,812
Website

Re: [solved] ThinkPad connect with extern Monitor Problem

I may be a bit confused: is the problem with setting screen resolution, or with which screen application windows appear on?

the "xrandr" commands only deal with the the resolution and layout of the monitors.  Client window placement is entirely under the control of the window manager.

If you have two screens of different sizes you have to choose one of the following three types of set up.  Each will have various options, but as I see it there are 3 distinct categories of 2 monitor setup:

1) Mirrored with both monitors at their optimal resolution.  The smaller monitor only shows a subset of what is visible on the larger monitor

2) Extended desktop with both monitors at their optimal resolution.  Here there is no overlap in what the monitors show; each one shows a different part of the desktop.

3) Mirrored with both monitors showing the same content.  Now X has to negotiate for a resolution compatible with both monitors.  In most cases this will lead to some "dead space" on one of the monitors which will show up as either horizontal or vertical black bars at the edges of the monitor.


It sounds like you have tried a couple of these setting and have run into different issues with different settings.  This makes it hard to solve the problems as it feels like a moving target.  So can you define which of the 3 options you want?


InterrobangSlider
• How's my coding? See this page.
• How's my moderating? Feel free to email any concerns, complaints, or objections.

Offline

#14 2012-10-11 00:01:04

kerasi
Member
Registered: 2011-07-07
Posts: 39

Re: [solved] ThinkPad connect with extern Monitor Problem

@trilby

i use my Laptop at home 95% and at work 5%

so my first choice would be to have the perfect resolution on my NEC external and when i opened a window it would display there and i dont have to open my Laptop to move the screen to see it on my external or is it so that you must have opened the laptop display to move the windows?

And when i would take it at work it would be perfect if i see it on the laptop with his resolution 1600x900

i hope i explained it well.



@anoknusa

i change your config to this

xrandr --output LVDS1 --mode 1600x900 --pos 0x900 --rotate normal --output DP2 --mode 1920x1200 --pos 0x0 --rotate normal

when i start firefox it was displayes well on my external but when i opened xterm or thunar pcman i have to open my laptop and move from it up to the external do i make a mistake?

anoknusa wrote:

I stuck that in a script to run when I start X; if the external monitor isn't plugged in, only the laptop display is used.  This sets each screen to act as a seperate display; I can still drag windows between them if I wish, as well as assign windows to open on one screen or the other through DWM's configuration file.  As mentioned earlier, this is also the only way (I think) to get each screen to display at its native resolution.  Note that I specify the resolution for both my T520 LCD and my external monitor, and specify their positions (my external is mounted to the wall above my desk, directly above my laptop); change those as necessary.

what has xrandr to look like for my external monitor and laptop?
and what would the script look like for me?

external 1920x1200
T420 1600x900

and thank you for your patience and have a nice day

ps: i know iam very close to find a solution for my problem smile

Last edited by kerasi (2012-10-11 00:05:55)

Offline

#15 2012-10-11 00:17:38

Trilby
Forum Moderator
From: Massachusetts, USA
Registered: 2011-11-29
Posts: 14,812
Website

Re: [solved] ThinkPad connect with extern Monitor Problem

kerasi wrote:

so my first choice would be to have the perfect resolution on my NEC external and when i opened a window it would display there and i dont have to open my Laptop

Oh, well that's *easy*.  Forget nearly everything from this thread.  You don't want multiple screens, you just want to switch to the other screen, right?

#when at home:
xrandr --output DP2 --auto --output LVDS1 --off

#to leave for work:
xrandr --output LVDS1 --auto --DP2 --off

InterrobangSlider
• How's my coding? See this page.
• How's my moderating? Feel free to email any concerns, complaints, or objections.

Offline

#16 2012-10-11 00:35:54

kerasi
Member
Registered: 2011-07-07
Posts: 39

Re: [solved] ThinkPad connect with extern Monitor Problem

cooool that was it iam so happy big_smile

big thanks to all of you

i was thinking before what advantage it would be to have multiple screens?

i always use ncmpcpp and firefox so would it be than possible to watch on ncmpcpp and firefox the same time? because i can move the windows do you use multiple screens?

i could explain how happy i was now i can work and learn archlinux


ist now 02:40 in the morning here in germany

Last edited by kerasi (2012-10-11 00:50:17)

Offline

#17 2012-10-11 01:08:16

Trilby
Forum Moderator
From: Massachusetts, USA
Registered: 2011-11-29
Posts: 14,812
Website

Re: [solved] ThinkPad connect with extern Monitor Problem

Yes, multiple monitors can be used to show different programs.  This would be the "extended desktop" mode, or #2 from my earlier post.  But in this case, the window manager controls which monitor the new windows show up on.  You'd have to configure your window manager to put the right windows on the correct monitors.  Openbox is pretty good at this once with window rules in it's rc file.


InterrobangSlider
• How's my coding? See this page.
• How's my moderating? Feel free to email any concerns, complaints, or objections.

Offline

#18 2012-10-11 10:44:41

David Batson
Member
Registered: 2011-10-13
Posts: 640

Re: [solved] ThinkPad connect with extern Monitor Problem

That little script I posted up above (post #6) cycles through various configurations of internal monitor and external monitor.  You could modify the xrandr lines to suit your situation.  Assign a hotkey to run the script, then each time you press the hotkey you run the next xrandr command in the script.

In my case I was using LVDS for the internal display, and VGA-0 for the external display.  Your displays may be identified differently (it seems they are), and the code would have to be changed to match.

Offline

#19 2012-10-11 11:28:30

kerasi
Member
Registered: 2011-07-07
Posts: 39

Re: [solved] ThinkPad connect with extern Monitor Problem

Trilby wrote:

I don't know how to get the proper resolutions in early userspace to see the init messages properly.

so does it gave a solution for that or is this why i use an laptop with external monitor and the kernel is makes the mistake? what is the case for that what do you think?
if that whould be work also it whould be perfect

@David
thank you i will try this when i learn more about openbox iam a absolutely beginner smile

Offline

Board footer

Powered by FluxBB