You are not logged in.

#1 2012-10-13 16:51:20

D4ve
Member
Registered: 2012-08-02
Posts: 209

[Solved] XServer 1.13 and Catalyst...

Hi, after the last update i can't start my xserver.

Systemd says, that gdm starts fine but i can't see anything except my tty smile

Heres the Xorg.0.log:

[   170.848]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[   170.878] X Protocol Version 11, Revision 0
[   170.888] Build Operating System: Linux 3.6.0-1-ARCH x86_64
[   170.899] Current Operating System: Linux arch247 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012 x86_64
[   170.899] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7f15c92f-c86f-49dd-ab06-f89a4a37d526 ro init=/usr/lib/systemd/systemd nomodeset
[   170.924] Build Date: 05 October 2012  01:57:18PM
[   170.937]
[   170.949] Current version of pixman: 0.26.2
[   170.976]    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   170.976] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   171.033] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 13 18:30:14 2012
[   171.049] (==) Using config file: "/etc/X11/xorg.conf"
[   171.064] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   171.064] (==) ServerLayout "aticonfig Layout"
[   171.064] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[   171.064] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[   171.064] (**) |   |-->Device "aticonfig-Device[0]-0"
[   171.064] (==) Automatically adding devices
[   171.064] (==) Automatically enabling devices
[   171.064] (==) Automatically adding GPU devices
[   171.065] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   171.065]    Entry deleted from font path.
[   171.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   171.065]    Entry deleted from font path.
[   171.065]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   171.065] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   171.065]    Entry deleted from font path.
[   171.065]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   171.065] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
[   171.065] (==) ModulePath set to "/usr/lib/xorg/modules"
[   171.065] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[   171.065] (II) Loader magic: 0x7fcc20
[   171.065] (II) Module ABI versions:
[   171.065]    X.Org ANSI C Emulation: 0.4
[   171.065]    X.Org Video Driver: 13.0
[   171.065]    X.Org XInput driver : 18.0
[   171.065]    X.Org Server Extension : 7.0
[   171.068] (--) PCI:*(0:0:1:0) 1002:9802:1043:84a5 rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[   171.068] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   171.084] Initializing built-in extension Generic Event Extension
[   171.099] Initializing built-in extension SHAPE
[   171.114] Initializing built-in extension MIT-SHM
[   171.130] Initializing built-in extension XInputExtension
[   171.145] Initializing built-in extension XTEST
[   171.160] Initializing built-in extension BIG-REQUESTS
[   171.175] Initializing built-in extension SYNC
[   171.190] Initializing built-in extension XKEYBOARD
[   171.205] Initializing built-in extension XC-MISC
[   171.220] Initializing built-in extension SECURITY
[   171.235] Initializing built-in extension XINERAMA
[   171.250] Initializing built-in extension XFIXES
[   171.265] Initializing built-in extension RENDER
[   171.280] Initializing built-in extension RANDR
[   171.295] Initializing built-in extension COMPOSITE
[   171.311] Initializing built-in extension DAMAGE
[   171.326] Initializing built-in extension MIT-SCREEN-SAVER
[   171.342] Initializing built-in extension DOUBLE-BUFFER
[   171.358] Initializing built-in extension RECORD
[   171.374] Initializing built-in extension DPMS
[   171.390] Initializing built-in extension X-Resource
[   171.406] Initializing built-in extension XVideo
[   171.422] Initializing built-in extension XVideo-MotionCompensation
[   171.439] Initializing built-in extension XFree86-VidModeExtension
[   171.455] Initializing built-in extension XFree86-DGA
[   171.472] Initializing built-in extension XFree86-DRI
[   171.489] Initializing built-in extension DRI2
[   171.489] (II) "glx" will be loaded by default.
[   171.489] (II) LoadModule: "glx"
[   171.489] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   171.490] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[   171.490]    compiled for 6.9.0, module version = 1.0.0
[   171.507] Loading extension GLX
[   171.507] (II) LoadModule: "fglrx"
[   171.508] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   171.538] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[   171.538]    compiled for 1.4.99.906, module version = 9.0.2
[   171.538]    Module class: X.Org Video Driver
[   171.538] (II) Loading sub module "fglrxdrm"
[   171.538] (II) LoadModule: "fglrxdrm"
[   171.539] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   171.539] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   171.539]    compiled for 1.4.99.906, module version = 9.0.2
[   171.539] (II) AMD Proprietary Linux Driver Version Identifier:9.00.2
[   171.539] (II) AMD Proprietary Linux Driver Release Identifier: 9.00.11
[   171.539] (II) AMD Proprietary Linux Driver Build Date: Sep 20 2012 11:56:16
[   171.539] (--) using VT number 2

[   171.649] (WW) Falling back to old probe method for fglrx
[   171.660] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[   171.663] ukiDynamicMajor: found major device number 251
[   171.663] ukiDynamicMajor: found major device number 251
[   171.663] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[   171.663] ukiOpenDevice: node name is /dev/ati/card0
[   171.663] ukiOpenDevice: open result is 9, (OK)
[   171.663] ukiOpenDevice: Get driver state failed
[   171.663] ukiOpenByBusid: ukiOpenMinor returns 9
[   171.664] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   171.665] (--) Chipset Supported AMD Graphics Processor (0x9802) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:1) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:2) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:3) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[   171.666] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[   171.668] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[   171.668] (II) AMD Video driver is signed
[   171.669] (II) fglrx(0): pEnt->device->identifier=0x165d5a0
[   171.669] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[   171.670] (II) Loading sub module "vgahw"
[   171.670] (II) LoadModule: "vgahw"
[   171.670] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   171.670] (II) Module vgahw: vendor="X.Org Foundation"
[   171.670]    compiled for 1.13.0, module version = 0.1.0
[   171.670]    ABI class: X.Org Video Driver, version 13.0
[   171.670] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[   171.670] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   171.670] (==) fglrx(0): Default visual is TrueColor
[   171.670] (**) fglrx(0): Option "DPMS" "true"
[   171.671] (==) fglrx(0): RGB weight 888
[   171.671] (II) fglrx(0): Using 8 bits per RGB
[   171.671] (==) fglrx(0): Buffer Tiling is ON
[   171.671] (II) Loading sub module "fglrxdrm"
[   171.671] (II) LoadModule: "fglrxdrm"
[   171.671] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   171.671] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   171.671]    compiled for 1.4.99.906, module version = 9.0.2
[   171.674] ukiDynamicMajor: found major device number 251
[   171.675] ukiDynamicMajor: found major device number 251
[   171.675] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[   171.675] ukiOpenDevice: node name is /dev/ati/card0
[   171.675] ukiOpenDevice: open result is 12, (OK)
[   171.675] ukiOpenDevice: Get driver state failed
[   171.675] ukiOpenByBusid: ukiOpenMinor returns 12
[   171.675] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   171.675] (EE) fglrx(0): The graphics processor is already set to console mode, set X mode fail. Cannot start X.
[   171.675] (EE) fglrx(0): PreInit failed
[   171.675] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === end
[   171.683] SetVBEMode failed
[   171.683] (II) UnloadModule: "fglrx"
[   171.683] (II) UnloadSubModule: "fglrxdrm"
[   171.683] (II) Unloading fglrxdrm
[   171.683] (II) UnloadSubModule: "vgahw"
[   171.683] (II) Unloading vgahw
[   171.683] (II) UnloadSubModule: "fglrxdrm"
[   171.683] (EE) Screen(s) found, but none have a usable configuration.
[   171.683]
Fatal server error:
[   171.683] no screens found
[   171.683] (EE)
Please consult the The X.Org Foundation support
     at http://wiki.x.org
 for help.
[   171.684] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   171.684] (EE)
[   171.920] Server terminated with error (1). Closing log file.

Xserver is at version 1.13, catalyst should be at version 12.9

The xorg.conf-file was generated through aticonfig --inital and worked before the update. While searching the net i came across /etc/dbus-1/gdm.conf, maybe its a permission-problem?

Any help is appreciated

Last edited by D4ve (2012-10-13 21:31:54)

Offline

#2 2012-10-13 18:27:51

sysrmr
Member
Registered: 2011-10-06
Posts: 5

Re: [Solved] XServer 1.13 and Catalyst...

Had also a problem with xorg 1.13 and catalyst. (just not gdm but slim).
I found this:

The main graphics drivers have already been updated to support the new API. The proprietary NVIDIA graphics driver has also been updated for the X.Org Server 1.13 ABI. The only common driver not yet supporting this new xorg-server release is the AMD Catalyst binary driver, but the API/ABI support should be there within a few months.

Source: http://www.phoronix.com/scan.php?page=n … px=MTE3Njg

Seems that is the reason.

In this topic [1] Vi0L0 said that catalyst-test from AUR works with xorg 1.13 from [testing]. I didn't test that. I just downgraded xorg-server, xorg-server-common, catalyst-utils, lib32-catalyst-utils (and xf86-input-evdev because the newest package has always dep. to the newest xorg-server).
[1] https://bbs.archlinux.org/viewtopic.php … 0#p1172200

My package versions are (after downgrading):

xorg-server 1.12.4-1
xorg-server-common 1.12.4-1
catalyst 12.8-2
catalyst-utils 12.8-2
lib32-catalyst-utils 12.8-2

Edit: I just realised that there is a new catalyst package (catalyst-dkms) on the [community], i always used the package from the [catalyst] repo (Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch).

Last edited by sysrmr (2012-10-13 18:37:54)

Offline

#3 2012-10-13 21:31:40

D4ve
Member
Registered: 2012-08-02
Posts: 209

Re: [Solved] XServer 1.13 and Catalyst...

Ah, okay.

I installed catalyst-test from aur and can confirm that this works with xserver 1.13 smile

Thanks.

Offline

#4 2012-10-13 22:47:19

weirddan455
Member
Registered: 2012-04-15
Posts: 192

Re: [Solved] XServer 1.13 and Catalyst...

sysrmr wrote:

Edit: I just realised that there is a new catalyst package (catalyst-dkms) on the [community], i always used the package from the [catalyst] repo (Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch).

I have a Radeon 5970 and I can confirm the one in [community] works with Xorg 1.13.  It got updated to the 12.9 beta (same as in catalyst-test) at the same time as Xorg got the update to 1.13.

Offline

#5 2012-10-14 20:27:46

NiteiaTt
Member
Registered: 2012-04-15
Posts: 29

Re: [Solved] XServer 1.13 and Catalyst...

I had the same problem. Installing catalyst-dkms worked for me smile

Offline

#6 2012-10-16 13:32:00

koshon
Member
Registered: 2010-12-11
Posts: 9

Re: [Solved] XServer 1.13 and Catalyst...

I solved this problem by this: https://bugs.gentoo.org/show_bug.cgi?id=435322
Comment 4
Device Drivers  --->
Graphics support  --->
<m> /dev/agpgart (AGP Support)  --->
And this work for me and glx work fine smile

Offline

#7 2012-10-18 18:47:30

divide
Member
Registered: 2012-09-23
Posts: 5

Re: [Solved] XServer 1.13 and Catalyst...

koshon wrote:

I solved this problem by this: https://bugs.gentoo.org/show_bug.cgi?id=435322
Comment 4
Device Drivers  --->
Graphics support  --->
<m> /dev/agpgart (AGP Support)  --->
And this work for me and glx work fine smile

Can you explain what this means? I am having the same problem.

Offline

#8 2012-10-18 19:14:13

alphaniner
Member
From: Ancapistan
Registered: 2010-07-12
Posts: 2,581

Re: [Solved] XServer 1.13 and Catalyst...

@divide
It's kernel config.  I assume you would need to compile a custom kernel to use this solution.  Kernel config is not one of my strong suits so I may be wrong.  See the wiki.


But whether the Constitution really be one thing, or another, this much is certain - that it has either authorized such a government as we have had, or has been powerless to prevent it. In either case, it is unfit to exist.
-Lysander Spooner

Offline

#9 2012-10-18 20:12:20

divide
Member
Registered: 2012-09-23
Posts: 5

Re: [Solved] XServer 1.13 and Catalyst...

Ok, I thought I saw catalyst-dkms was one of the packages in update. Removed catalyst-hook and installed catalyst-dkms then reboot fixed the problem.

Offline

Board footer

Powered by FluxBB