You are not logged in.

#1 2012-10-18 06:17:36

jmvidalvia
Member
Registered: 2012-01-02
Posts: 23

[SOLVED] Can't use 1280x1024 resolution

Hi,
After recent updates my screen resolution is not working properly.
When I do:

$xrandr --output VGA1 --mode 1280x1024 --rate 75

The resolution is stack at 1280x800.
I can use the whole screen forcing the resolution when launching certain apps, like rdesktop.
I tried to change the xorg monitor config, without success:

#cat /etc/X11/xorg.conf.d/10-monitor.conf
Section "Monitor"
    Identifier    "Monitor0"
EndSection

Section "Device"
    Identifier    "Device0"
    Driver        "intel" #Choose the driver used for this monitor
    Option        "SwapbuffersWait" "false"
EndSection

Section "Screen"
    Identifier    "Screen0"  #Collapse Monitor and Device section to Screen section
    Device        "Device0"
    Monitor       "Monitor0"
    DefaultDepth  16 #Choose the depth (16||24)
    SubSection "Display"
        Depth     16
#        Modes     "1280x800_50.00" #Choose the resolution
        Modes     "1280x1024_75.00" #Choose the resolution
    EndSubSection
EndSection

When checking the Xorg logs, I see:

[    95.017] (II) intel(0): Printing DDC gathered Modelines:
[    95.017] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1320 1346 1412  800 803 807 818 -hsync -vsync (49.1 kHz eP)
[    95.017] (II) intel(0): Modeline "1280x800"x0.0   57.75  1280 1320 1346 1412  800 803 807 818 -hsync -vsync (40.9 kHz e)
[    97.424] (II) intel(0): EDID vendor "LEN", prod id 16401

Don't know what else to change.
Thanks,

Last edited by jmvidalvia (2012-10-20 18:51:25)

Offline

#2 2012-10-20 18:53:44

jmvidalvia
Member
Registered: 2012-01-02
Posts: 23

Re: [SOLVED] Can't use 1280x1024 resolution

I ignore If this is a bug but first I need to shutdown the laptop screen in order to get xrandr to fill the screen properly:

xrandr --output LVDS1 --off && xrandr --output VGA1 --mode 1280x1024 --rate 75

Offline

Board footer

Powered by FluxBB