You are not logged in.

#1 2012-10-26 03:15:13

cheese, lol
Member
Registered: 2011-12-16
Posts: 6

Xmonad and Xmobar: avoidStruts no longer exposes Xmobar

I've been using Xmonad with the same config for months now. I reinstalled Arch recently, and ever since then avoidStruts no longer keeps Xmobar from being hidden behind windows.
I have installed the xmonad and xmonad-contrib packages; my config compiles without errors. I'm at a loss here because I can't identify any changes that may have been made to either of the aforementioned packages that might cause this issue.

xmonad.hs

import XMonad
import Data.Monoid
import Data.Ratio ((%))
import System.Exit
import XMonad.Hooks.EwmhDesktops
import XMonad.Hooks.DynamicLog
import XMonad.Hooks.ManageDocks
import XMonad.Hooks.UrgencyHook
import XMonad.Layout.NoBorders
import XMonad.Layout.Named
import XMonad.Layout.Grid
import XMonad.Layout.IM
import XMonad.Util.Run(spawnPipe)
import System.IO


import qualified XMonad.StackSet as W
import qualified Data.Map        as M

-- The preferred terminal program, which is used in a binding below and by
-- certain contrib modules.
--
myTerminal      = "urxvt"

-- Whether focus follows the mouse pointer.
myFocusFollowsMouse :: Bool
myFocusFollowsMouse = True

-- Width of the window border in pixels.
--
myBorderWidth   = 2

-- modMask lets you specify which modkey you want to use. The default
-- is mod1Mask ("left alt").  You may also consider using mod3Mask
-- ("right alt"), which does not conflict with emacs keybindings. The
-- "windows key" is usually mod4Mask.
--
myModMask       = mod4Mask

-- The default number of workspaces (virtual screens) and their names.
-- By default we use numeric strings, but any string may be used as a
-- workspace name. The number of workspaces is determined by the length
-- of this list.
--
-- A tagging example:
--
-- > workspaces = ["web", "irc", "code" ] ++ map show [4..9]
--
myWorkspaces    = ["1","2","3","4","5","6","7","8","9"]

-- Border colors for unfocused and focused windows, respectively.
--
myNormalBorderColor  = "#404040"
-- myFocusedBorderColor = "#0080ff"
myFocusedBorderColor = "#ff0000"

------------------------------------------------------------------------
-- Key bindings. Add, modify or remove key bindings here.
--
myKeys conf@(XConfig {XMonad.modMask = modm}) = M.fromList $

    -- launch a terminal
    [ ((modm .|. shiftMask, xK_Return), spawn $ XMonad.terminal conf)

    -- launch dmenu
    , ((modm,               xK_p     ), spawn "dmenu_run")

    -- launch gmrun
    , ((modm .|. shiftMask, xK_p     ), spawn "gmrun")

    -- close focused window
    , ((modm .|. shiftMask, xK_c     ), kill)

    -- close focused window (2)
    , ((modm,               xK_z     ), kill)

    -- close focused window (3)
    , ((modm,               xK_Escape), kill)

     -- Rotate through the available layout algorithms
    , ((modm,               xK_space ), sendMessage NextLayout)

    --  Reset the layouts on the current workspace to default
    , ((modm .|. shiftMask, xK_space ), setLayout $ XMonad.layoutHook conf)

    -- Resize viewed windows to the correct size
    , ((modm,               xK_n     ), refresh)

    -- Move focus to the next window
    , ((modm,               xK_Tab   ), windows W.focusDown)

    -- Move focus to the next window
    , ((modm,               xK_j     ), windows W.focusDown)

    -- Move focus to the previous window
    , ((modm,               xK_k     ), windows W.focusUp  )

    -- Move focus to the master window
    , ((modm,               xK_m     ), windows W.focusMaster  )

    -- Swap the focused window and the master window
    , ((modm,               xK_Return), windows W.swapMaster)

    -- Swap the focused window with the next window
    , ((modm .|. shiftMask, xK_j     ), windows W.swapDown  )

    -- Swap the focused window with the previous window
    , ((modm .|. shiftMask, xK_k     ), windows W.swapUp    )

    -- Shrink the master area
    , ((modm,               xK_h     ), sendMessage Shrink)

    -- Expand the master area
    , ((modm,               xK_l     ), sendMessage Expand)

    -- Push window back into tiling
    , ((modm,               xK_t     ), withFocused $ windows . W.sink)

    -- Increment the number of windows in the master area
    , ((modm              , xK_comma ), sendMessage (IncMasterN 1))

    -- Deincrement the number of windows in the master area
    , ((modm              , xK_period), sendMessage (IncMasterN (-1)))

    -- Toggle the status bar gap
    -- Use this binding with avoidStruts from Hooks.ManageDocks.
    -- See also the statusBar function from Hooks.DynamicLog.
    --
    -- , ((modm              , xK_b     ), sendMessage ToggleStruts)

    -- Quit xmonad
    , ((modm .|. shiftMask, xK_q     ), io (exitWith ExitSuccess))

    -- Restart xmonad
    , ((modm              , xK_q     ), spawn "xmonad --recompile; xmonad --restart")

	 -- Start Opera
	 , ((modm .|. shiftMask, xK_i     ), spawn "chromium")

	 -- Start Thunar
	 , ((modm .|. shiftMask, xK_f     ), spawn "pcmanfm")

	 -- Start networking gui 
	 , ((modm .|. shiftMask, xK_o     ), spawn "wicd-gtk --no-tray")

	 -- Video Settings
	 , ((modm .|. shiftMask, xK_v     ), spawn "nvidia-settings")
    ]
    ++

    --
    -- mod-[1..9], Switch to workspace N
    -- mod-shift-[1..9], Move client to workspace N
    --
    [((m .|. modm, k), windows $ f i)
        | (i, k) <- zip (XMonad.workspaces conf) [xK_1 .. xK_9]
        , (f, m) <- [(W.greedyView, 0), (W.shift, shiftMask)]]
    ++

    --
    -- mod-{w,e,r}, Switch to physical/Xinerama screens 1, 2, or 3
    -- mod-shift-{w,e,r}, Move client to screen 1, 2, or 3
    --
    [((m .|. modm, key), screenWorkspace sc >>= flip whenJust (windows . f))
        | (key, sc) <- zip [xK_w, xK_e, xK_r] [0..]
        , (f, m) <- [(W.view, 0), (W.shift, shiftMask)]]


------------------------------------------------------------------------
-- Mouse bindings: default actions bound to mouse events
--
myMouseBindings (XConfig {XMonad.modMask = modm}) = M.fromList $

    -- mod-button1, Set the window to floating mode and move by dragging
    [ ((modm, button1), (\w -> focus w >> mouseMoveWindow w
                                       >> windows W.shiftMaster))

    -- mod-button2, Raise the window to the top of the stack
    , ((modm, button2), (\w -> focus w >> windows W.shiftMaster))

    -- mod-button3, Set the window to floating mode and resize by dragging
    , ((modm, button3), (\w -> focus w >> mouseResizeWindow w
                                       >> windows W.shiftMaster))

    -- you may also bind events to the mouse scroll wheel (button4 and button5)
    ]

------------------------------------------------------------------------
-- Layouts:

-- You can specify and transform your layouts by modifying these values.
-- If you change layout bindings be sure to use 'mod-shift-space' after
-- restarting (with 'mod-q') to reset your layout state to the new
-- defaults, as xmonad preserves your old layout settings by default.
--
-- The available layouts.  Note that each layout is separated by |||,
-- which denotes layout choice.
--
myLayout = tall ||| grid ||| full
  where

     -- default tiling algorithm partitions the screen into two panes
     tiled   = Tall nmaster delta ratio

     -- The default number of windows in the master pane
     nmaster = 1

     -- Default proportion of screen occupied by master pane
     ratio   = 65/100

     -- Percent of screen to increment by when resizing panes
     delta   = 5/100

     tall = named "Tall"
          $ avoidStruts
          $ Tall nmaster delta ratio
     grid = named "Grid"
	      $ avoidStruts
          $ withIM (1%7) (Role "buddy_list") (GridRatio (4/3))
     full = named "Full"
	      $ noBorders
          $ Full

------------------------------------------------------------------------
-- Window rules:

-- Execute arbitrary actions and WindowSet manipulations when managing
-- a new window. You can use this to, for example, always float a
-- particular program, or have a client always appear on a particular
-- workspace.
--
-- To find the property name associated with a program, use
-- > xprop | grep WM_CLASS
-- and click on the client you're interested in.
--
-- To match on the WM_NAME, you can use 'title' in the same way that
-- 'className' and 'resource' are used below.
--
myManageHook = composeAll
    [ className =? "MPlayer"        --> doFloat
    , className =? "Gimp"           --> doFloat
--  , className =? "Nm-connection-editor"  --> doFloat
--  , className =? "Wicd-client.py"  --> doFloat
    , resource  =? "desktop_window" --> doIgnore
    , resource  =? "kdesktop"       --> doIgnore
--  , className =? "Xfce4-notifyd"  --> doIgnore
    ]

------------------------------------------------------------------------
-- Event handling

-- * EwmhDesktops users should change this to ewmhDesktopsEventHook
--
-- Defines a custom handler function for X Events. The function should
-- return (All True) if the default handler is to be run afterwards. To
-- combine event hooks use mappend or mconcat from Data.Monoid.
--
-- myEventHook = mempty
myEventHook = fullscreenEventHook

------------------------------------------------------------------------
-- Status bars and logging

-- Perform an arbitrary action on each internal state change or X event.
-- See the 'XMonad.Hooks.DynamicLog' extension for examples.
--
myLogHook h = dynamicLogWithPP $ xmobarPP
	{ ppOutput = hPutStrLn h 
	, ppTitle = xmobarColor "green" "" . shorten 200
	, ppUrgent = xmobarColor "white" "red" . wrap "" ""
	}

------------------------------------------------------------------------
-- Startup hook

-- Perform an arbitrary action each time xmonad starts or is restarted
-- with mod-q.  Used by, e.g., XMonad.Layout.PerWorkspace to initialize
-- per-workspace layout choices.
--
-- By default, do nothing.
myStartupHook = return ()

------------------------------------------------------------------------
-- Run xmonad with the settings you specify.
--
main = do
	xmproc <- spawnPipe "/usr/bin/xmobar /home/chris/.xmonad/xmobarrc"
	xmonad $ withUrgencyHook NoUrgencyHook $ defaultConfig
			{ terminal           = myTerminal
			, focusFollowsMouse  = myFocusFollowsMouse
			, borderWidth        = myBorderWidth
			, modMask            = myModMask
			, workspaces         = myWorkspaces
			, normalBorderColor  = myNormalBorderColor
			, focusedBorderColor = myFocusedBorderColor
			, keys               = myKeys
			, mouseBindings      = myMouseBindings
			, layoutHook         = myLayout
			, manageHook         = myManageHook
			, handleEventHook    = myEventHook
			, logHook            = myLogHook xmproc
			, startupHook        = myStartupHook
			}

xmobarrc

Config
	{ font = "xft:ProFont:pixelsize=12"
	, bgColor = "#000000"
-- used to make the bar appear correctly after Mod-q in older xmonad implementations (0.9.x)
-- doesn't seem to do anything anymore (0.10, darcs)
--     , lowerOnStart = False
	, commands =
		[ Run Wireless "wlan0" ["-t", "<essid> <quality>%"] 10
		, Run CommandReader "/home/chris/.xmonad/volume-listener.sh" "vol"
		, Run CommandReader "/home/chris/.xmonad/hdaps-listener.sh" "hdaps"
		, Run Battery
			[ "-t", "<acstatus> <left>%"
			, "--"
			, "-f", "AC/online"
			, "-o", "Bat"
			, "-O", "AC"
			]
			20
		, Run Date "%a %b %_d %H:%M" "date" 10
		, Run StdinReader
		]
	, sepChar = "%"
	, alignSep = "}{"
	, template = "%StdinReader% }{ <fc=#ff0000>%hdaps%</fc>  %wlan0wi%  Vol %vol%  %battery%  <fc=#ee9a00>%date%</fc> "
	}

Last edited by cheese, lol (2012-10-26 03:15:39)

Offline

#2 2012-10-27 20:12:10

brianb
Member
From: Montreal, QC
Registered: 2012-02-17
Posts: 81
Website

Re: Xmonad and Xmobar: avoidStruts no longer exposes Xmobar

Downgrade to xmobar-0.15. See here.

Offline

Board footer

Powered by FluxBB