You are not logged in.
- Topics: Active | Unanswered
#1 2012-11-04 03:54:51
- wilberfan
- Member
- From: So. Cal
- Registered: 2010-12-18
- Posts: 264
[SOLVED] Black X Screen with Hauppauge PVR350-but fine without
I have an "old" (but recently updated) arch install on /dev/sda6--with an awesome working mythtv setup. The hardware includes a working Hauppauge PVR-350 card. Everything works great (even the remote).
Since it's been several years since I first installed it, I wanted to try a 'clean' arch install, and a clean mythtv install--just for the pleasure of having a nice, fresh, up-to-date, uncluttered arch/mythtv box.
So, this afternoon I installed arch from scratch (on /dev/sda1), and got a working X session with nvidia drivers--but ONLY if the Hauppauge is unplugged.
When it's plugged in, my X session quickly turns black (that is, the screen goes black). If I shutdown, unplug the card, and reboot--the X session is fine. (XFCE)
The "old" arch was recently updated to a dual systemd/whatever-the-old-thing-was called; the 'new' arch install from today was from the latest install .iso--so it's "pure" systemd (?)
Here is the Xorg log from one of the failed sessions:
[ 17.984]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 17.985] X Protocol Version 11, Revision 0
[ 17.985] Build Operating System: Linux 3.6.2-1-ARCH i686
[ 17.985] Current Operating System: Linux arch32 3.6.5-1-ARCH #1 SMP PREEMPT Thu Nov 1 09:11:24 CET 2012 i686
[ 17.986] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4f0ee9e1-739d-4e28-ab99-0f02aef965e7 ro quiet
[ 17.986] Build Date: 19 October 2012 03:58:01PM
[ 17.986]
[ 17.986] Current version of pixman: 0.26.2
[ 17.987] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.987] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.989] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 3 20:34:15 2012
[ 17.989] (==) Using config file: "/etc/X11/xorg.conf"
[ 17.990] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 17.990] (==) ServerLayout "Layout0"
[ 17.990] (**) |-->Screen "Screen0" (0)
[ 17.991] (**) | |-->Monitor "Monitor0"
[ 18.001] (**) | |-->Device "Device0"
[ 18.001] (**) |-->Screen "Screen1" (1)
[ 18.001] (**) | |-->Monitor "Monitor1"
[ 18.001] (**) | |-->Device "Device1"
[ 18.001] (**) |-->Input Device "Keyboard0"
[ 18.001] (**) |-->Input Device "Mouse0"
[ 18.001] (**) Option "Xinerama" "0"
[ 18.001] (==) Automatically adding devices
[ 18.001] (==) Automatically enabling devices
[ 18.001] (==) Automatically adding GPU devices
[ 18.023] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 18.023] Entry deleted from font path.
[ 18.023] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 18.023] Entry deleted from font path.
[ 18.023] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 18.023] Entry deleted from font path.
[ 18.023] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 18.023] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 18.023] Entry deleted from font path.
[ 18.023] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 18.023] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 18.023] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.023] (**) Extension "Composite" is enabled
[ 18.023] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 18.023] (WW) Disabling Keyboard0
[ 18.023] (WW) Disabling Mouse0
[ 18.023] (II) Loader magic: 0x825a620
[ 18.023] (II) Module ABI versions:
[ 18.023] X.Org ANSI C Emulation: 0.4
[ 18.023] X.Org Video Driver: 13.0
[ 18.023] X.Org XInput driver : 18.0
[ 18.023] X.Org Server Extension : 7.0
[ 18.026] (--) PCI:*(0:1:0:0) 10de:06e4:1462:1162 rev 161, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
[ 18.026] (--) PCI: (0:6:1:0) 4444:0803:0070:4000 rev 1, Mem @ 0xf4000000/67108864
[ 18.026] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.026] Initializing built-in extension Generic Event Extension
[ 18.027] Initializing built-in extension SHAPE
[ 18.027] Initializing built-in extension MIT-SHM
[ 18.027] Initializing built-in extension XInputExtension
[ 18.027] Initializing built-in extension XTEST
[ 18.028] Initializing built-in extension BIG-REQUESTS
[ 18.028] Initializing built-in extension SYNC
[ 18.028] Initializing built-in extension XKEYBOARD
[ 18.028] Initializing built-in extension XC-MISC
[ 18.028] Initializing built-in extension SECURITY
[ 18.029] Initializing built-in extension XINERAMA
[ 18.029] Initializing built-in extension XFIXES
[ 18.029] Initializing built-in extension RENDER
[ 18.029] Initializing built-in extension RANDR
[ 18.029] Initializing built-in extension COMPOSITE
[ 18.030] Initializing built-in extension DAMAGE
[ 18.030] Initializing built-in extension MIT-SCREEN-SAVER
[ 18.030] Initializing built-in extension DOUBLE-BUFFER
[ 18.030] Initializing built-in extension RECORD
[ 18.031] Initializing built-in extension DPMS
[ 18.031] Initializing built-in extension X-Resource
[ 18.031] Initializing built-in extension XVideo
[ 18.031] Initializing built-in extension XVideo-MotionCompensation
[ 18.032] Initializing built-in extension XFree86-VidModeExtension
[ 18.032] Initializing built-in extension XFree86-DGA
[ 18.032] Initializing built-in extension XFree86-DRI
[ 18.032] Initializing built-in extension DRI2
[ 18.032] (II) LoadModule: "glx"
[ 18.033] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.394] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.394] compiled for 4.0.2, module version = 1.0.0
[ 18.394] Module class: X.Org Server Extension
[ 18.394] (II) NVIDIA GLX Module 304.60 Sun Oct 14 20:34:01 PDT 2012
[ 18.394] Loading extension GLX
[ 18.394] (II) LoadModule: "nvidia"
[ 18.394] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.428] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.428] compiled for 4.0.2, module version = 1.0.0
[ 18.428] Module class: X.Org Video Driver
[ 18.443] (II) NVIDIA dlloader X Driver 304.60 Sun Oct 14 20:14:37 PDT 2012
[ 18.443] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.443] (++) using VT number 1
[ 18.445] (II) Loading sub module "fb"
[ 18.445] (II) LoadModule: "fb"
[ 18.445] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.446] (II) Module fb: vendor="X.Org Foundation"
[ 18.446] compiled for 1.13.0, module version = 1.0.0
[ 18.446] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.446] (II) Loading sub module "wfb"
[ 18.446] (II) LoadModule: "wfb"
[ 18.446] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 18.448] (II) Module wfb: vendor="X.Org Foundation"
[ 18.448] compiled for 1.13.0, module version = 1.0.0
[ 18.448] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.448] (II) Loading sub module "ramdac"
[ 18.448] (II) LoadModule: "ramdac"
[ 18.448] (II) Module "ramdac" already built-in
[ 18.450] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 18.450] (==) NVIDIA(0): RGB weight 888
[ 18.450] (==) NVIDIA(0): Default visual is TrueColor
[ 18.450] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.450] (**) NVIDIA(0): Option "TripleBuffer" "false"
[ 18.450] (**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
[ 18.450] (**) NVIDIA(0): Option "Coolbits" "1"
[ 18.450] (**) NVIDIA(0): Option "MetaModes" "CRT: nvidia-auto-select +0+0"
[ 18.450] (**) NVIDIA(1): Option "Coolbits" "1"
[ 18.451] (**) NVIDIA(1): Option "MetaModes" "TV: nvidia-auto-select +0+0"
[ 18.451] (**) NVIDIA(0): Enabling 2D acceleration
[ 18.915] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 18.915] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 18.915] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 18.915] (EE) NVIDIA(0): README for additional information.
[ 18.915] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 18.915] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 18.915] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[ 18.915] (==) NVIDIA(1): RGB weight 888
[ 18.915] (==) NVIDIA(1): Default visual is TrueColor
[ 18.915] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 18.915] (**) NVIDIA(1): Option "TripleBuffer" "false"
[ 18.915] (**) NVIDIA(1): Option "AddARGBGLXVisuals" "true"
[ 19.300] (II) NVIDIA(GPU-0): Display (HP f1905 (DFP-0)) does not support NVIDIA 3D Vision
[ 19.300] (II) NVIDIA(GPU-0): stereo.
[ 19.301] (II) NVIDIA(1): NVIDIA GPU GeForce 8400 GS (G98) at PCI:1:0:0 (GPU-0)
[ 19.301] (--) NVIDIA(1): Memory: 524288 kBytes
[ 19.301] (--) NVIDIA(1): VideoBIOS: 62.98.12.00.40
[ 19.302] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 19.302] (--) NVIDIA(1): Interlaced video modes are supported on this GPU
[ 19.304] (--) NVIDIA(1): Valid display device(s) on GeForce 8400 GS at PCI:1:0:0
[ 19.304] (--) NVIDIA(1): CRT-0
[ 19.304] (--) NVIDIA(1): CRT-1
[ 19.304] (--) NVIDIA(1): NVIDIA TV Encoder (TV-0) (connected)
[ 19.304] (--) NVIDIA(1): HP f1905 (DFP-0) (connected)
[ 19.304] (--) NVIDIA(1): CRT-0: 400.0 MHz maximum pixel clock
[ 19.304] (--) NVIDIA(1): CRT-1: 400.0 MHz maximum pixel clock
[ 19.304] (--) NVIDIA(1): NVIDIA TV Encoder (TV-0): 400.0 MHz maximum pixel clock
[ 19.304] (--) NVIDIA(1): TV encoder: NVIDIA
[ 19.304] (--) NVIDIA(1): HP f1905 (DFP-0): 330.0 MHz maximum pixel clock
[ 19.304] (--) NVIDIA(1): HP f1905 (DFP-0): Internal Dual Link TMDS
[ 19.304] (**) NVIDIA(1): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.304] (**) NVIDIA(1): device NVIDIA TV Encoder (TV-0) (Using EDID frequencies
[ 19.304] (**) NVIDIA(1): has been enabled on all display devices.)
[ 19.305] (II) NVIDIA(1): Validated MetaModes:
[ 19.305] (II) NVIDIA(1): "TV:nvidia-auto-select+0+0"
[ 19.305] (II) NVIDIA(1): Virtual screen size determined to be 1024 x 768
[ 19.306] (WW) NVIDIA(1): Unable to support custom viewPortOut 1024 x 576 +0 +96
[ 19.333] (==) NVIDIA(1): DPI set to (75, 75); computed from built-in default
[ 19.333] (**) NVIDIA(1): Enabling 32-bit ARGB GLX visuals.
[ 19.333] (II) UnloadModule: "nvidia"
[ 19.334] (II) UnloadSubModule: "wfb"
[ 19.334] (II) UnloadSubModule: "fb"
[ 19.334] (--) Depth 24 pixmap format is 32 bpp
[ 19.334] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 19.337] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 19.337] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 19.337] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 19.337] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 19.337] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 19.337] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 19.337] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 19.337] (II) NVIDIA(0): Config Options in the README.
[ 19.339] (II) NVIDIA(0): Setting mode "TV:nvidia-auto-select+0+0"
[ 19.393] Loading extension NV-GLX
[ 19.463] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 19.463] (==) NVIDIA(0): Backing store disabled
[ 19.463] (==) NVIDIA(0): Silken mouse enabled
[ 19.464] (**) NVIDIA(0): DPMS enabled
[ 19.464] Loading extension NV-CONTROL
[ 19.464] Loading extension XINERAMA
[ 19.464] (WW) NVIDIA(0): Option "TwinView" is not used
[ 19.464] (II) Loading sub module "dri2"
[ 19.464] (II) LoadModule: "dri2"
[ 19.464] (II) Module "dri2" already built-in
[ 19.464] (II) NVIDIA(0): [DRI2] Setup complete
[ 19.464] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 19.464] (--) RandR disabled
[ 19.474] (II) Initializing extension GLX
[ 19.618] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 19.618] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.618] (II) LoadModule: "evdev"
[ 19.618] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.619] (II) Module evdev: vendor="X.Org Foundation"
[ 19.619] compiled for 1.13.0, module version = 2.7.3
[ 19.619] Module class: X.Org XInput Driver
[ 19.619] ABI class: X.Org XInput driver, version 18.0
[ 19.619] (II) Using input driver 'evdev' for 'Power Button'
[ 19.619] (**) Power Button: always reports core events
[ 19.619] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 19.619] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.619] (--) evdev: Power Button: Found keys
[ 19.619] (II) evdev: Power Button: Configuring as keyboard
[ 19.619] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 19.619] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 19.619] (**) Option "xkb_rules" "evdev"
[ 19.619] (**) Option "xkb_model" "evdev"
[ 19.619] (**) Option "xkb_layout" "us"
[ 19.653] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 19.653] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.653] (II) Using input driver 'evdev' for 'Power Button'
[ 19.653] (**) Power Button: always reports core events
[ 19.653] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 19.653] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.653] (--) evdev: Power Button: Found keys
[ 19.653] (II) evdev: Power Button: Configuring as keyboard
[ 19.653] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 19.653] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 19.653] (**) Option "xkb_rules" "evdev"
[ 19.653] (**) Option "xkb_model" "evdev"
[ 19.653] (**) Option "xkb_layout" "us"
[ 19.654] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event10)
[ 19.654] (II) No input driver specified, ignoring this device.
[ 19.654] (II) This device may have been added with another device file.
[ 19.654] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event11)
[ 19.654] (II) No input driver specified, ignoring this device.
[ 19.654] (II) This device may have been added with another device file.
[ 19.655] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event12)
[ 19.655] (II) No input driver specified, ignoring this device.
[ 19.655] (II) This device may have been added with another device file.
[ 19.655] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event13)
[ 19.655] (II) No input driver specified, ignoring this device.
[ 19.655] (II) This device may have been added with another device file.
[ 19.656] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
[ 19.656] (II) No input driver specified, ignoring this device.
[ 19.656] (II) This device may have been added with another device file.
[ 19.656] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event7)
[ 19.656] (II) No input driver specified, ignoring this device.
[ 19.656] (II) This device may have been added with another device file.
[ 19.656] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8)
[ 19.656] (II) No input driver specified, ignoring this device.
[ 19.656] (II) This device may have been added with another device file.
[ 19.657] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event9)
[ 19.657] (II) No input driver specified, ignoring this device.
[ 19.657] (II) This device may have been added with another device file.
[ 19.657] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event0)
[ 19.657] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.657] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 19.657] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 19.657] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event0"
[ 19.657] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
[ 19.657] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
[ 19.657] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 19.657] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.0/input/input0/event0"
[ 19.657] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 8)
[ 19.657] (**) Option "xkb_rules" "evdev"
[ 19.657] (**) Option "xkb_model" "evdev"
[ 19.657] (**) Option "xkb_layout" "us"
[ 19.658] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event1)
[ 19.658] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.658] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 19.658] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 19.658] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event1"
[ 19.658] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
[ 19.658] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
[ 19.658] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[ 19.658] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
[ 19.658] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing relative x/y axes to exist.
[ 19.658] (--) evdev: Logitech Logitech Illuminated Keyboard: Found absolute axes
[ 19.658] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing absolute x/y axes to exist.
[ 19.658] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
[ 19.658] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
[ 19.658] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 19.658] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[ 19.659] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[ 19.659] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.659] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.1/input/input1/event1"
[ 19.659] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 9)
[ 19.659] (**) Option "xkb_rules" "evdev"
[ 19.659] (**) Option "xkb_model" "evdev"
[ 19.659] (**) Option "xkb_layout" "us"
[ 19.659] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
[ 19.659] (WW) evdev: Logitech Logitech Illuminated Keyboard: ignoring absolute axes.
[ 19.659] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
[ 19.659] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
[ 19.659] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
[ 19.659] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
[ 19.660] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event2)
[ 19.660] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev pointer catchall"
[ 19.660] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 19.660] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 19.660] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event2"
[ 19.660] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
[ 19.660] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 9 mouse buttons
[ 19.660] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[ 19.660] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
[ 19.660] (--) evdev: Logitech Logitech Illuminated Keyboard: Found x and y relative axes
[ 19.660] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
[ 19.660] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[ 19.660] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[ 19.660] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.660] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.2/input/input2/event2"
[ 19.660] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: MOUSE, id 10)
[ 19.660] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
[ 19.660] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
[ 19.660] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
[ 19.660] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
[ 19.660] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
[ 19.661] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/mouse0)
[ 19.661] (II) No input driver specified, ignoring this device.
[ 19.661] (II) This device may have been added with another device file.
[ 19.661] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 19.661] (II) No input driver specified, ignoring this device.
[ 19.661] (II) This device may have been added with another device file.
[ 20.992] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 20.992] (**) NVIDIA(0): device NVIDIA TV Encoder (TV-0) (Using EDID frequencies
[ 20.992] (**) NVIDIA(0): has been enabled on all display devices.)
[ 21.039] (II) NVIDIA(GPU-0): Display (HP f1905 (DFP-0)) does not support NVIDIA 3D Vision
[ 21.039] (II) NVIDIA(GPU-0): stereo.Here's the dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.5-1-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Thu Nov 1 09:11:24 CET 2012
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007feaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007feb0000-0x000000007fee1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007fee2000-0x000000007feeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007fef0000-0x000000007fefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP45-UD3P/EP45-UD3P, BIOS F10 02/05/2010
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7feb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f5800-0x000f580f] mapped at [c00f5800]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
[ 0.000000] [mem 0x00000000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
[ 0.000000] RAMDISK: [mem 0x37a0e000-0x37cfefff]
[ 0.000000] Allocated new RAMDISK: [mem 0x3750d000-0x377fd34b]
[ 0.000000] Move RAMDISK from [mem 0x37a0e000-0x37cfe34b] to [mem 0x3750d000-0x377fd34b]
[ 0.000000] ACPI: RSDP 000f7630 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 7fee2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 7fee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 7fee2180 0507F (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 7feb0000 00040
[ 0.000000] ACPI: HPET 7fee7340 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 7fee73c0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 7fee7480 00560 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 7fee79e0 06852 (v01 GBT GBT B0 5455312E BG?? 00020101)
[ 0.000000] ACPI: APIC 7fee7240 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 7feee8a0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x7feaffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7feaffff]
[ 0.000000] On node 0 totalpages: 523839
[ 0.000000] free_area_init_node: node 0, pgdat c1558b00, node_mem_map f650c200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294308 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x7ff00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f64cc000 s32384 r0 d20864 u53248
[ 0.000000] pcpu-alloc: s32384 r0 d20864 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519745
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4f0ee9e1-739d-4e28-ab99-0f02aef965e7 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 4191488 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007feb0)
[ 0.000000] Memory: 2063792k/2095808k available (3972k kernel code, 31564k reserved, 1539k data, 536k init, 1186504k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1562000 - 0xc15e8000 ( 536 kB)
.data : 0xc13e10b2 - 0xc1561e00 (1539 kB)
.text : 0xc1000000 - 0xc13e10b2 (3972 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5c0a000 soft=f5c0c000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2800.218 MHz processor
[ 0.003334] Calibrating delay loop (skipped), value calculated using timer frequency.. 5602.78 BogoMIPS (lpj=9334060)
[ 0.003337] pid_max: default: 32768 minimum: 301
[ 0.003361] Security Framework initialized
[ 0.003364] AppArmor: AppArmor disabled by boot time parameter
[ 0.003376] Mount-cache hash table entries: 512
[ 0.003555] Initializing cgroup subsys cpuacct
[ 0.003556] Initializing cgroup subsys memory
[ 0.003562] Initializing cgroup subsys devices
[ 0.006669] Initializing cgroup subsys freezer
[ 0.006670] Initializing cgroup subsys net_cls
[ 0.006671] Initializing cgroup subsys blkio
[ 0.006694] CPU: Physical Processor ID: 0
[ 0.006696] CPU: Processor Core ID: 0
[ 0.006697] mce: CPU supports 6 MCE banks
[ 0.006703] CPU0: Thermal monitoring enabled (TM2)
[ 0.006705] process: using mwait in idle threads
[ 0.006711] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift is 0xffffffff
[ 0.007366] ACPI: Core revision 20120711
[ 0.009522] ftrace: allocating 17424 entries in 35 pages
[ 0.013366] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.013722] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046943] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping 0a
[ 0.049997] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.049997] ... version: 2
[ 0.049997] ... bit width: 40
[ 0.049997] ... generic registers: 2
[ 0.049997] ... value mask: 000000ffffffffff
[ 0.049997] ... max period: 000000007fffffff
[ 0.049997] ... fixed-purpose events: 3
[ 0.049997] ... event mask: 0000000700000003
[ 0.073441] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.086673] CPU 1 irqstacks, hard=f5cf6000 soft=f5d00000
[ 0.006666] Initializing CPU#1
[ 0.086676] smpboot: Booting Node 0, Processors #1
[ 0.099810] Brought up 2 CPUs
[ 0.099810] smpboot: Total of 2 processors activated (11205.57 BogoMIPS)
[ 0.100060] devtmpfs: initialized
[ 0.100142] PM: Registering ACPI NVS region [mem 0x7feb0000-0x7fee1fff] (204800 bytes)
[ 0.100814] NET: Registered protocol family 16
[ 0.100948] ACPI: bus type pci registered
[ 0.100998] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.101001] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.101002] PCI: Using MMCONFIG for extended config space
[ 0.101003] PCI: Using configuration type 1 for base access
[ 0.101078] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.101079] mtrr: probably your BIOS does not setup all CPUs.
[ 0.101080] mtrr: corrected configuration.
[ 0.101467] bio: create slab <bio-0> at 0
[ 0.101467] ACPI: Added _OSI(Module Device)
[ 0.101467] ACPI: Added _OSI(Processor Device)
[ 0.101467] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.101467] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.103900] ACPI: EC: Look up EC in DSDT
[ 0.106452] ACPI BIOS Bug: Warning: Incorrect checksum in table [TAMG] - 0x72, should be 0x71 (20120711/tbutils-324)
[ 0.106566] ACPI: SSDT 7feee280 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.106712] ACPI: Dynamic OEM Table Load:
[ 0.106714] ACPI: SSDT (null) 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.106829] ACPI: SSDT 7feee740 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.106957] ACPI: Dynamic OEM Table Load:
[ 0.106959] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.107080] ACPI: Interpreter enabled
[ 0.107094] ACPI: (supports S0 S3 S4 S5)
[ 0.107107] ACPI: Using IOAPIC for interrupt routing
[ 0.110611] ACPI: No dock devices found.
[ 0.110618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.110659] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.110749] PCI host bridge to bus 0000:00
[ 0.110753] pci_bus 0000:00: busn_res: [bus 00-3f] is inserted under domain [bus 00-ff]
[ 0.110754] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.110756] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.110758] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.110760] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.110762] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.110764] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.110765] pci_bus 0000:00: root bus resource [mem 0x7ff00000-0xfebfffff]
[ 0.110773] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
[ 0.110809] pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
[ 0.110842] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.110875] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.110913] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
[ 0.110958] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.110995] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
[ 0.111040] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.111077] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
[ 0.111125] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.111140] pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.111219] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.111233] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.111291] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.111310] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.111370] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.111392] pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
[ 0.111452] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.111472] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[ 0.111532] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.111551] pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
[ 0.111612] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.111633] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.111670] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
[ 0.111716] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.111754] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
[ 0.111798] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.111835] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
[ 0.111884] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.111898] pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.111974] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.112028] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.112101] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.112104] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.112107] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b)
[ 0.112147] pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018a
[ 0.112160] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.112167] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.112174] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.112181] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.112188] pci 0000:00:1f.2: reg 20: [io 0xf900-0xf90f]
[ 0.112195] pci 0000:00:1f.2: reg 24: [io 0xf800-0xf80f]
[ 0.112235] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.112248] pci 0000:00:1f.3: reg 10: [mem 0xfdffd000-0xfdffd0ff 64bit]
[ 0.112266] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.112295] pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
[ 0.112308] pci 0000:00:1f.5: reg 10: [io 0xf600-0xf607]
[ 0.112315] pci 0000:00:1f.5: reg 14: [io 0xf500-0xf503]
[ 0.112322] pci 0000:00:1f.5: reg 18: [io 0xf400-0xf407]
[ 0.112329] pci 0000:00:1f.5: reg 1c: [io 0xf300-0xf303]
[ 0.112335] pci 0000:00:1f.5: reg 20: [io 0xf200-0xf20f]
[ 0.112342] pci 0000:00:1f.5: reg 24: [io 0xf100-0xf10f]
[ 0.112398] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-3f]
[ 0.112410] pci 0000:01:00.0: [10de:06e4] type 00 class 0x030000
[ 0.112419] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.112429] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.112438] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.112445] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
[ 0.112452] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.112500] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.112502] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.112505] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.112508] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.112541] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-3f]
[ 0.112544] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.112583] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3f]
[ 0.112602] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[ 0.112684] pci 0000:03:00.0: reg 24: [mem 0xfdbfe000-0xfdbfffff]
[ 0.112743] pci 0000:03:00.0: PME# supported from D3hot
[ 0.112772] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[ 0.112795] pci 0000:03:00.1: reg 10: [io 0xdf00-0xdf07]
[ 0.112808] pci 0000:03:00.1: reg 14: [io 0xde00-0xde03]
[ 0.112820] pci 0000:03:00.1: reg 18: [io 0xdd00-0xdd07]
[ 0.112833] pci 0000:03:00.1: reg 1c: [io 0xdc00-0xdc03]
[ 0.112846] pci 0000:03:00.1: reg 20: [io 0xdb00-0xdb0f]
[ 0.112924] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.112935] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.112939] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.112942] pci 0000:00:1c.3: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.112978] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-3f]
[ 0.112997] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.113012] pci 0000:04:00.0: reg 10: [io 0xce00-0xceff]
[ 0.113038] pci 0000:04:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
[ 0.113055] pci 0000:04:00.0: reg 20: [mem 0xfdee0000-0xfdeeffff 64bit pref]
[ 0.113066] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.113125] pci 0000:04:00.0: supports D1 D2
[ 0.113127] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.116680] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.116684] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.116687] pci 0000:00:1c.4: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.116692] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.116725] pci_bus 0000:05: busn_res: [bus 05] is inserted under [bus 00-3f]
[ 0.116744] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.116760] pci 0000:05:00.0: reg 10: [io 0xbe00-0xbeff]
[ 0.116786] pci 0000:05:00.0: reg 18: [mem 0xfdcff000-0xfdcfffff 64bit pref]
[ 0.116803] pci 0000:05:00.0: reg 20: [mem 0xfdce0000-0xfdceffff 64bit pref]
[ 0.116814] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.116874] pci 0000:05:00.0: supports D1 D2
[ 0.116875] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.123346] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.123349] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.123352] pci 0000:00:1c.5: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.123357] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.123376] pci_bus 0000:06: busn_res: [bus 06] is inserted under [bus 00-3f]
[ 0.123387] pci 0000:06:01.0: [4444:0803] type 00 class 0x040000
[ 0.123403] pci 0000:06:01.0: reg 10: [mem 0xf4000000-0xf7ffffff pref]
[ 0.123492] pci 0000:06:07.0: [104c:8024] type 00 class 0x0c0010
[ 0.123507] pci 0000:06:07.0: reg 10: [mem 0xfdaff000-0xfdaff7ff]
[ 0.123516] pci 0000:06:07.0: reg 14: [mem 0xfdaf8000-0xfdafbfff]
[ 0.123579] pci 0000:06:07.0: supports D1 D2
[ 0.123581] pci 0000:06:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.123615] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.123620] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.123625] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.123627] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.123629] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.123630] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.123632] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.123634] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.123636] pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xfebfffff] (subtractive decode)
[ 0.123656] pci_bus 0000:00: on NUMA node 0
[ 0.123659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.123807] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.123843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.123885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.123917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.123950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.124054] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.124055] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.132594] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.132632] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.132669] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.132706] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.132742] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.132780] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.132816] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.132853] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.132894] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.132894] vgaarb: loaded
[ 0.132894] vgaarb: bridge control possible 0000:01:00.0
[ 0.132894] PCI: Using ACPI for IRQ routing
[ 0.134165] PCI: pci_cache_line_size set to 64 bytes
[ 0.134246] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.134248] e820: reserve RAM buffer [mem 0x7feb0000-0x7fffffff]
[ 0.134329] NetLabel: Initializing
[ 0.134330] NetLabel: domain hash size = 128
[ 0.134331] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.134340] NetLabel: unlabeled traffic allowed by default
[ 0.134360] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.134364] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.134368] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.150014] Switching to clocksource hpet
[ 0.155228] pnp: PnP ACPI init
[ 0.155242] ACPI: bus type pnp registered
[ 0.155310] pnp 00:00: [bus 00-3f]
[ 0.155313] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.155314] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.155316] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.155318] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.155320] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.155322] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.155324] pnp 00:00: [mem 0x7ff00000-0xfebfffff window]
[ 0.155369] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.155431] pnp 00:01: [io 0x0010-0x001f]
[ 0.155432] pnp 00:01: [io 0x0022-0x003f]
[ 0.155434] pnp 00:01: [io 0x0044-0x004d]
[ 0.155436] pnp 00:01: [io 0x0050-0x005f]
[ 0.155437] pnp 00:01: [io 0x0062-0x0063]
[ 0.155439] pnp 00:01: [io 0x0065-0x006f]
[ 0.155440] pnp 00:01: [io 0x0074-0x007f]
[ 0.155442] pnp 00:01: [io 0x0091-0x0093]
[ 0.155444] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.155445] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.155447] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.155448] pnp 00:01: [io 0x0290-0x029f]
[ 0.155450] pnp 00:01: [io 0x0800-0x0805]
[ 0.155451] pnp 00:01: [io 0x0290-0x0294]
[ 0.155453] pnp 00:01: [io 0x0880-0x088f]
[ 0.155512] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.155514] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.155516] system 00:01: [io 0x0800-0x0805] has been reserved
[ 0.155518] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.155520] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.155523] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.155533] pnp 00:02: [dma 4]
[ 0.155535] pnp 00:02: [io 0x0000-0x000f]
[ 0.155536] pnp 00:02: [io 0x0080-0x0090]
[ 0.155538] pnp 00:02: [io 0x0094-0x009f]
[ 0.155540] pnp 00:02: [io 0x00c0-0x00df]
[ 0.155565] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.155603] pnp 00:03: [irq 0 disabled]
[ 0.155613] pnp 00:03: [irq 8]
[ 0.155615] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.155640] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.155661] pnp 00:04: [io 0x0070-0x0073]
[ 0.155686] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.155693] pnp 00:05: [io 0x0061]
[ 0.155719] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.155727] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.155731] pnp 00:06: [irq 13]
[ 0.155756] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.155847] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.155849] pnp 00:07: [io 0x03f7]
[ 0.155854] pnp 00:07: [irq 6]
[ 0.155855] pnp 00:07: [dma 2]
[ 0.155890] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.156016] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.156021] pnp 00:08: [irq 4]
[ 0.156071] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.156212] pnp 00:09: [io 0x0378-0x037f]
[ 0.156216] pnp 00:09: [irq 7]
[ 0.156256] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.156351] pnp 00:0a: [io 0x0400-0x04cf]
[ 0.156353] pnp 00:0a: [io 0x04d2-0x04ff]
[ 0.156396] system 00:0a: [io 0x0400-0x04cf] has been reserved
[ 0.156398] system 00:0a: [io 0x04d2-0x04ff] has been reserved
[ 0.156401] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.156549] pnp 00:0b: [mem 0xf0000000-0xf3ffffff]
[ 0.156598] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.156600] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.156732] pnp 00:0c: [mem 0x000cdc00-0x000cffff]
[ 0.156734] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[ 0.156736] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[ 0.156737] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[ 0.156739] pnp 00:0c: [mem 0x7feb0000-0x7fefffff]
[ 0.156741] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.156742] pnp 00:0c: [mem 0x00100000-0x7feaffff]
[ 0.156744] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.156745] pnp 00:0c: [mem 0xfed10000-0xfed1dfff]
[ 0.156747] pnp 00:0c: [mem 0xfed20000-0xfed8ffff]
[ 0.156749] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.156750] pnp 00:0c: [mem 0xffb00000-0xffb7ffff]
[ 0.156752] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[ 0.156754] pnp 00:0c: [mem 0x000e0000-0x000effff]
[ 0.156815] system 00:0c: [mem 0x000cdc00-0x000cffff] has been reserved
[ 0.156817] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.156819] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.156821] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.156823] system 00:0c: [mem 0x7feb0000-0x7fefffff] could not be reserved
[ 0.156825] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.156827] system 00:0c: [mem 0x00100000-0x7feaffff] could not be reserved
[ 0.156830] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.156832] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.156834] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[ 0.156836] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.156838] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.156840] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.156842] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[ 0.156845] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.156860] pnp 00:0d: [mem 0xffb80000-0xffbfffff]
[ 0.156894] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.156898] pnp: PnP ACPI: found 14 devices
[ 0.156899] ACPI: ACPI bus type pnp unregistered
[ 0.193198] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.193201] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.193204] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.193211] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.193231] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.193233] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.193235] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.193237] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.193241] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7ff00000-0x800fffff]
[ 0.193244] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80100000-0x802fffff 64bit pref]
[ 0.193246] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]
[ 0.193249] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.193252] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.193254] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.193257] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.193260] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.193262] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.193266] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.193268] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.193272] pci 0000:00:1c.0: bridge window [mem 0x7ff00000-0x800fffff]
[ 0.193276] pci 0000:00:1c.0: bridge window [mem 0x80100000-0x802fffff 64bit pref]
[ 0.193281] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.193283] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.193287] pci 0000:00:1c.3: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.193290] pci 0000:00:1c.3: bridge window [mem 0x80300000-0x804fffff 64bit pref]
[ 0.193296] pci 0000:04:00.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
[ 0.193298] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.193300] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.193304] pci 0000:00:1c.4: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.193307] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.193313] pci 0000:05:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc0ffff pref]
[ 0.193314] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.193317] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.193321] pci 0000:00:1c.5: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.193324] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.193340] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.193344] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.193347] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.193363] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.193386] pci 0000:00:1e.0: setting latency timer to 64
[ 0.193389] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.193391] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.193393] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.193394] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.193396] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.193398] pci_bus 0000:00: resource 9 [mem 0x7ff00000-0xfebfffff]
[ 0.193400] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.193401] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.193403] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.193405] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.193407] pci_bus 0000:02: resource 1 [mem 0x7ff00000-0x800fffff]
[ 0.193409] pci_bus 0000:02: resource 2 [mem 0x80100000-0x802fffff 64bit pref]
[ 0.193411] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.193412] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.193414] pci_bus 0000:03: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
[ 0.193416] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.193418] pci_bus 0000:04: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.193420] pci_bus 0000:04: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.193422] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.193423] pci_bus 0000:05: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.193425] pci_bus 0000:05: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.193427] pci_bus 0000:06: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.193429] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
[ 0.193431] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.193432] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.193434] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.193436] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.193437] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.193439] pci_bus 0000:06: resource 9 [mem 0x7ff00000-0xfebfffff]
[ 0.193466] NET: Registered protocol family 2
[ 0.193595] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.193920] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.194077] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.194096] TCP: reno registered
[ 0.194099] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.194105] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.194154] NET: Registered protocol family 1
[ 0.220049] pci 0000:01:00.0: Boot video device
[ 0.220071] PCI: CLS 4 bytes, default 64
[ 0.220122] Unpacking initramfs...
[ 0.274300] Freeing initrd memory: 3012k freed
[ 0.275329] apm: BIOS not found.
[ 0.275545] audit: initializing netlink socket (disabled)
[ 0.275557] type=2000 audit(1352000037.273:1): initialized
[ 0.284086] bounce pool size: 64 pages
[ 0.284099] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.285524] VFS: Disk quotas dquot_6.5.2
[ 0.285568] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.285685] msgmni has been set to 1719
[ 0.285836] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.285859] io scheduler noop registered
[ 0.285861] io scheduler deadline registered
[ 0.285867] io scheduler cfq registered (default)
[ 0.285969] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.286039] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.286117] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.286194] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.286271] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.286386] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 0.286387] vesafb: scrolling: redraw
[ 0.286389] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.286580] vesafb: framebuffer at 0xf9000000, mapped to 0xf8080000, using 5120k, total 5120k
[ 0.326257] Console: switching to colour frame buffer device 160x64
[ 0.365859] fb0: VESA VGA frame buffer device
[ 0.365895] intel_idle: does not run on family 6 model 23
[ 0.365912] GHES: HEST is not enabled!
[ 0.365922] isapnp: Scanning for PnP cards...
[ 0.677853] isapnp: No Plug & Play device found
[ 0.677889] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.698379] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.719113] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.719392] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.719784] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.719824] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.719948] mousedev: PS/2 mouse device common for all mice
[ 0.720062] rtc_cmos 00:04: RTC can wake from S4
[ 0.720177] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.720199] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.720216] cpuidle: using governor ladder
[ 0.720217] cpuidle: using governor menu
[ 0.720295] drop_monitor: Initializing network drop monitor service
[ 0.720376] TCP: cubic registered
[ 0.720488] NET: Registered protocol family 10
[ 0.720628] NET: Registered protocol family 17
[ 0.720637] Key type dns_resolver registered
[ 0.720740] Using IPI No-Shortcut mode
[ 0.720817] PM: Hibernation image not present or could not be loaded.
[ 0.720823] registered taskstats version 1
[ 0.721266] rtc_cmos 00:04: setting system clock to 2012-11-04 03:33:58 UTC (1352000038)
[ 0.721343] Freeing unused kernel memory: 536k freed
[ 0.721542] Write protecting the kernel text: 3976k
[ 0.721562] Write protecting the kernel read-only data: 1176k
[ 0.726939] systemd-udevd[42]: starting version 195
[ 0.745452] Floppy drive(s): fd0 is 1.44M
[ 0.749839] ACPI: bus type usb registered
[ 0.749861] usbcore: registered new interface driver usbfs
[ 0.749870] usbcore: registered new interface driver hub
[ 0.749909] usbcore: registered new device driver usb
[ 0.750214] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.750244] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.750247] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.750252] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.754173] ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported
[ 0.754188] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 0.757160] SCSI subsystem initialized
[ 0.758778] ACPI: bus type scsi registered
[ 0.758824] libata version 3.00 loaded.
[ 0.760277] ahci 0000:03:00.0: version 3.0
[ 0.760360] FDC 0 is a post-1991 82077
[ 0.763422] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.763597] hub 1-0:1.0: USB hub found
[ 0.763601] hub 1-0:1.0: 6 ports detected
[ 0.763708] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.763711] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.763717] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.767630] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported
[ 0.767654] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 0.773386] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.773391] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.774665] scsi0 : ahci
[ 0.775223] scsi1 : ahci
[ 0.775379] ata1: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 19
[ 0.775382] ata2: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe180 irq 19
[ 0.775464] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.775498] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.775765] scsi2 : pata_jmicron
[ 0.776126] scsi3 : pata_jmicron
[ 0.776443] ata3: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[ 0.776446] ata4: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[ 0.776684] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.776879] hub 2-0:1.0: USB hub found
[ 0.776883] hub 2-0:1.0: 6 ports detected
[ 0.776969] ata_piix 0000:00:1f.2: version 2.13
[ 0.776979] ata_piix 0000:00:1f.2: MAP [
[ 0.776980] P0 P2 P1 P3 ]
[ 0.777015] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.777405] scsi4 : ata_piix
[ 0.777907] scsi5 : ata_piix
[ 0.778125] ata5: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 0.778129] ata6: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 0.778252] ata_piix 0000:00:1f.5: MAP [
[ 0.778254] P0 -- P1 -- ]
[ 0.778283] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.778471] scsi6 : ata_piix
[ 0.778811] scsi7 : ata_piix
[ 0.778987] ata7: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf200 irq 19
[ 0.778990] ata8: SATA max UDMA/133 cmd 0xf400 ctl 0xf300 bmdma 0xf208 irq 19
[ 1.093365] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.093404] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.107348] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.118009] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.276683] tsc: Refined TSC clocksource calibration: 2800.099 MHz
[ 1.276688] Switching to clocksource tsc
[ 1.570059] ata5.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.570072] ata5.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.573387] ata6.00: SATA link down (SStatus 0 SControl 300)
[ 1.573399] ata6.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.590308] ata5.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.02, max UDMA/100
[ 1.594691] ata5.01: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133
[ 1.594695] ata5.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.606837] ata5.00: configured for UDMA/100
[ 1.613625] ata5.01: configured for UDMA/133
[ 1.615195] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.02 PQ: 0 ANSI: 5
[ 1.615452] ata6.01: HPA detected: current 1250261615, native 1250263728
[ 1.615455] ata6.01: ATA-8: WDC WD6400AACS-00G8B1, 05.04C05, max UDMA/133
[ 1.615457] ata6.01: 1250261615 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.615470] ACPI: Invalid Power Resource to register!
[ 1.615545] scsi 4:0:1:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 1.626987] ata6.01: configured for UDMA/133
[ 1.627098] scsi 5:0:1:0: Direct-Access ATA WDC WD6400AACS-0 05.0 PQ: 0 ANSI: 5
[ 1.615762] ACPI: Invalid Power Resource to register!
[ 1.627360] ACPI: Invalid Power Resource to register!
[ 1.627964] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.627988] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.627991] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.627997] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.628019] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 1.628270] hub 3-0:1.0: USB hub found
[ 1.628274] hub 3-0:1.0: 2 ports detected
[ 1.628342] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.628344] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.628348] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.628378] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 1.628481] hub 4-0:1.0: USB hub found
[ 1.628484] hub 4-0:1.0: 2 ports detected
[ 1.628547] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.628549] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.628554] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.628573] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 1.628675] hub 5-0:1.0: USB hub found
[ 1.628678] hub 5-0:1.0: 2 ports detected
[ 1.628741] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.628744] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.628749] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.628769] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 1.628870] hub 6-0:1.0: USB hub found
[ 1.628873] hub 6-0:1.0: 2 ports detected
[ 1.628936] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.628939] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.628943] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.628963] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 1.629296] hub 7-0:1.0: USB hub found
[ 1.629300] hub 7-0:1.0: 2 ports detected
[ 1.629365] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.629368] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.629374] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.629395] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 1.629517] hub 8-0:1.0: USB hub found
[ 1.629520] hub 8-0:1.0: 2 ports detected
[ 1.636247] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.636250] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.636410] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.636677] sd 5:0:1:0: [sdb] 1250261615 512-byte logical blocks: (640 GB/596 GiB)
[ 1.636714] sd 5:0:1:0: [sdb] Write Protect is off
[ 1.636716] sd 5:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.636732] sd 5:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.637848] sd 4:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.637884] sd 4:0:1:0: [sda] Write Protect is off
[ 1.637886] sd 4:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.637901] sd 4:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.677367] sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
[ 1.679484] sd 4:0:1:0: [sda] Attached SCSI disk
[ 1.732328] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 >
[ 1.732950] sd 5:0:1:0: [sdb] Attached SCSI disk
[ 1.933350] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 2.077488] hub 8-2:1.0: USB hub found
[ 2.079431] hub 8-2:1.0: 4 ports detected
[ 2.354433] usb 8-2.1: new full-speed USB device number 3 using uhci_hcd
[ 2.536275] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.0/input/input0
[ 2.536332] hid-generic 0003:046D:C318.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input0
[ 2.552549] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.1/input/input1
[ 2.552654] hid-generic 0003:046D:C318.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input1
[ 2.560894] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.1/8-2.1:1.2/input/input2
[ 2.560955] hid-generic 0003:046D:C318.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.2-2.1/input2
[ 2.560970] usbcore: registered new interface driver usbhid
[ 2.560971] usbhid: USB HID core driver
[ 2.768191] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.109603] systemd[1]: systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 3.118826] systemd[1]: Set hostname to <arch32>.
[ 3.259037] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 3.259275] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.259317] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.259329] systemd[1]: Starting Remote File Systems.
[ 3.259341] systemd[1]: Reached target Remote File Systems.
[ 3.259350] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.259374] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.259383] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.259404] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.259412] systemd[1]: Starting Encrypted Volumes.
[ 3.259422] systemd[1]: Reached target Encrypted Volumes.
[ 3.259472] systemd[1]: Starting udev Kernel Socket.
[ 3.259491] systemd[1]: Listening on udev Kernel Socket.
[ 3.259535] systemd[1]: Starting udev Control Socket.
[ 3.259558] systemd[1]: Listening on udev Control Socket.
[ 3.259584] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.259672] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.259685] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.259717] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.259727] systemd[1]: Expecting device dev-disk-by\x2duuid-82ffd99e\x2dd43d\x2d4831\x2dbeae\x2d78dfd77b79ef.device...
[ 3.259738] systemd[1]: Expecting device dev-disk-by\x2duuid-65e0a45a\x2d1257\x2d408b\x2da5a4\x2d5253088d330d.device...
[ 3.259748] systemd[1]: Expecting device dev-disk-by\x2duuid-9105144a\x2d6965\x2d4bc3\x2db7d3\x2d8cb09f6ba216.device...
[ 3.259758] systemd[1]: Expecting device dev-disk-by\x2duuid-1f9c4b99\x2d992d\x2d4247\x2db026\x2da513028ab44e.device...
[ 3.259767] systemd[1]: Expecting device dev-disk-by\x2duuid-56cd6b8b\x2ddeaa\x2d48d2\x2d914e\x2d7f563e5b43c2.device...
[ 3.259777] systemd[1]: Starting Journal Socket.
[ 3.259820] systemd[1]: Listening on Journal Socket.
[ 3.259836] systemd[1]: Started File System Check on Root Device.
[ 3.259846] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.293557] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.316439] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.316864] systemd[1]: Starting Apply Kernel Variables...
[ 3.323605] systemd[1]: Mounting Debug File System...
[ 3.331205] systemd[1]: Starting Setup Virtual Console...
[ 3.341124] systemd[1]: Mounting Huge Pages File System...
[ 3.348122] systemd[1]: Starting Load Kernel Modules...
[ 3.353702] systemd[1]: Starting udev Coldplug all Devices...
[ 3.357014] systemd[1]: Starting udev Kernel Device Manager...
[ 3.360237] systemd[1]: Starting Journal Service...
[ 3.363602] systemd[1]: Started Journal Service.
[ 3.511862] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 3.534670] systemd-udevd[147]: starting version 195
[ 3.747301] lirc_dev: IR Remote Control driver registered, major 250
[ 3.805393] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 3.805399] ACPI: Power Button [PWRB]
[ 3.805463] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.805465] ACPI: Power Button [PWRF]
[ 3.809438] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
[ 3.860164] Linux media interface: v0.10
[ 3.876743] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.880165] ACPI: Requesting acpi_cpufreq
[ 3.882317] tsc: Marking TSC unstable due to TSC halts in idle
[ 3.882330] ACPI: acpi_idle registered with cpuidle
[ 3.882443] Switching to clocksource hpet
[ 3.904497] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
[ 3.904889] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.924228] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \GP2C 1 (20120711/utaddress-251)
[ 3.924233] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.924269] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.933201] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 3.951306] Linux video capture interface: v2.00
[ 3.991083] iTCO_vendor_support: vendor-support=0
[ 4.000753] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.000777] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
[ 4.000996] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.024699] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.024881] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[ 4.025031] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xf8d1a000, 00:24:1d:2a:98:49, XID 1c4000c0 IRQ 45
[ 4.025033] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 4.025535] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.025702] r8169 0000:05:00.0: irq 46 for MSI/MSI-X
[ 4.025830] r8169 0000:05:00.0: eth1: RTL8168c/8111c at 0xf8d42000, 00:1f:d0:81:ab:41, XID 1c4000c0 IRQ 46
[ 4.025833] r8169 0000:05:00.0: eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 4.038943] ivtv: Start initialization, version 1.4.3
[ 4.038987] ivtv0: Initializing card 0
[ 4.038988] ivtv0: Autodetected Hauppauge card (cx23415 based)
[ 4.039059] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 4.044391] Linux agpgart interface v0.103
[ 4.045194] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 4.068776] IT8718 SuperIO detected.
[ 4.068931] parport_pc 00:09: reported by Plug and Play ACPI
[ 4.068976] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.080472] ppdev: user-space parallel port driver
[ 4.092481] bttv: driver version 0.9.19 loaded
[ 4.092483] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 4.096539] tveeprom 1-0050: Hauppauge model 48132, rev K268, serial# 9950569
[ 4.096542] tveeprom 1-0050: tuner model is LG TAPE H001F MK3 (idx 68, type 47)
[ 4.096544] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
[ 4.096546] tveeprom 1-0050: audio processor is MSP4448 (idx 27)
[ 4.096547] tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
[ 4.096549] tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
[ 4.096550] ivtv0: Autodetected Hauppauge WinTV PVR-350
[ 4.116549] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 4.153213] saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
[ 4.218874] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 4.218981] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.219041] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.219100] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.219158] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.219216] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.219272] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.219333] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.329989] nvidia: module license 'NVIDIA' taints kernel.
[ 4.330027] Disabling lock debugging due to kernel taint
[ 4.344571] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 4.344752] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.60 Sun Oct 14 20:13:08 PDT 2012
[ 4.388867] saa7127 1-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
[ 4.437424] msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
[ 4.437426] msp3400 1-0040: msp3400 supports radio, mode is autodetect and autoselect
[ 4.528379] tda9887 1-0043: creating new instance
[ 4.528381] tda9887 1-0043: tda988[5/6/7] found
[ 4.529407] tuner 1-0043: Tuner 74 found with type(s) Radio TV.
[ 4.530245] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[ 4.546675] tuner-simple 1-0061: creating new instance
[ 4.546677] tuner-simple 1-0061: type set to 47 (LG NTSC (TAPE series))
[ 4.560371] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 4.560403] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 4.560432] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 4.560460] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 4.560492] ivtv0: Registered device radio0 for encoder radio
[ 4.560524] ivtv0: Registered device video16 for decoder MPG (1024 kB)
[ 4.560555] ivtv0: Registered device vbi8 for decoder VBI (64 kB)
[ 4.560587] ivtv0: Registered device vbi16 for decoder VOUT
[ 4.560619] ivtv0: Registered device video48 for decoder YUV (1024 kB)
[ 4.560621] ivtv0: Initialized card: Hauppauge WinTV PVR-350
[ 4.560692] ivtv: End initialization
[ 4.580712] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
[ 4.580852] lirc_i2c: chip found @ 0x18 (Hauppauge IR)
[ 4.581018] i2c ir driver 1-0018: lirc_dev: driver lirc_i2c registered at minor = 0
[ 4.613418] firewire_ohci 0000:06:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 4.622161] usbcore: registered new interface driver uvcvideo
[ 4.622163] USB Video Class driver (1.1.1)
[ 5.113450] firewire_core 0000:06:07.0: created device fw0: GUID 00427c790000241d, S400
[ 5.320224] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[ 5.354198] ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
[ 5.553724] ivtv0: Encoder revision: 0x02060039
[ 5.553871] ivtv0: Decoder revision: 0x02020023
[ 5.569476] Adding 2096444k swap on /dev/sda5. Priority:-1 extents:1 across:2096444k
[ 5.646845] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 5.663037] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.667983] ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
[ 5.737554] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 5.999282] EXT4-fs (sdb12): mounting ext3 file system using the ext4 subsystem
[ 6.028507] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 6.047542] EXT4-fs (sdb12): mounted filesystem with ordered data mode. Opts: (null)
[ 6.132195] XFS (sdb11): Mounting Filesystem
[ 6.477173] XFS (sdb11): Ending clean mount
[ 6.540152] systemd-journald[148]: Received SIGUSR1
[ 6.834640] r8169 0000:04:00.0: eth0: link down
[ 6.834658] r8169 0000:04:00.0: eth0: link down
[ 6.834670] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.240619] systemd-logind[356]: Watching system buttons on /dev/input/event4 (Power Button)
[ 7.240698] systemd-logind[356]: Watching system buttons on /dev/input/event3 (Power Button)
[ 8.432913] r8169 0000:04:00.0: eth0: link up
[ 8.432924] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
** --> [ 18.914725] vmap allocation for size 16781312 failed: use vmalloc=<size> to increase size. <-- **
[ 18.914970] NVRM: RmInitAdapter failed! (0x26:0xffffffff:1183)
[ 18.914976] NVRM: rm_init_adapter(0) failed
[ 19.171682] NVRM: Your system is not currently configured to drive a VGA console
[ 19.171685] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 19.171687] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 19.171688] NVRM: drivers including, but not limited to, vesafb, may result in
[ 19.171689] NVRM: corruption and stability problems, and is not supported.
[ 22.922565] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0
[ 22.928116] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 22.930309] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 22.932452] EXT4-fs (sdb12): re-mounted. Opts: commit=0Everything is fine when I boot into the "old" arch/mythtv install--so I know the hardware works...
I could provide an Xorg.log and dmesg from the working install if anyone would find that helpful...
Thanks in advance for your help!
edit: Here's an lspci from the *working* ("old") install:
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
Kernel driver in use: pcieport
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Kernel driver in use: lpc_ich
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
Subsystem: Giga-byte Technology Device b002
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
Kernel driver in use: i801_smbus
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
Subsystem: Giga-byte Technology Device b002
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 8400 GS] (rev a1)
Subsystem: Micro-Star International Co., Ltd. Device 1162
Kernel driver in use: nvidia
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Kernel driver in use: ahci
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Kernel driver in use: pata_jmicron
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
Kernel driver in use: r8169
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
Kernel driver in use: r8169
06:01.0 Multimedia video controller: Internext Compression Inc iTVC15 (CX23415) Video Decoder (rev 01)
Subsystem: Hauppauge computer works Inc. WinTV PVR-350
Kernel driver in use: ivtv
06:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
Kernel driver in use: firewire_ohciHere's an lspci from the "new" 'failing' install:
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
01:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 8400 GS] (rev a1)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
06:01.0 Multimedia video controller: Internext Compression Inc iTVC15 (CX23415) Video Decoder (rev 01)
06:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)Last edited by wilberfan (2012-11-05 20:01:08)
Hey, be nice...I'm new at this!
Offline
#2 2012-11-05 00:06:18
- wilberfan
- Member
- From: So. Cal
- Registered: 2010-12-18
- Posts: 264
Re: [SOLVED] Black X Screen with Hauppauge PVR350-but fine without
I wonder if the system is confused as to which card is the primary video card? I'm not sure how to check that, nor how to ensure that the GeForce 8400 is selected to be the 'main' display card...
Hey, be nice...I'm new at this!
Offline
#3 2012-11-05 19:25:51
- wilberfan
- Member
- From: So. Cal
- Registered: 2010-12-18
- Posts: 264
Re: [SOLVED] Black X Screen with Hauppauge PVR350-but fine without
Well, look at that. I actually had this problem before--and SOLVED it before! [facepalm] I'd forgotten all about it....
https://bbs.archlinux.org/viewtopic.php?id=140151
I just added "vmalloc=256" to my linux line, and X started right up!
[edit] Well, mythtv had the solution, as well: http://www.mythtv.org/wiki/Common_Probl … _too_small
Last edited by wilberfan (2012-11-05 19:38:06)
Hey, be nice...I'm new at this!
Offline