You are not logged in.
So, i have migrated to zsh and averything is fine except a little PATH problem. Now, i hava a power saving script that is executed when i unplug the power line (via udev rule). Till migration to zsh averything worked fine but when i changed #!/bin/bash to #!/bin/zsh in script, it doesn't work anymore. I found out that script is workable only if i write full paths in it, eg. /sbin/hdparm... instead of hdparm... When i am in terminal or console PATH variable is working fine. I also found out, for now, that the problem are commands in /sbin and /usr/sbin folder - commands in /usr/bin are working just fine.
My PATH:
/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/usr/bin/vendor_perl:/usr/bin/core_perlI haven't messed up with /etc/zsh/zprofile neither.
My /etc/profile
# /etc/profile
#Set our umask
umask 022
# Set our default path
PATH="/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin"
export PATH
# Load profiles from /etc/profile.d
if test -d /etc/profile.d/; then
for profile in /etc/profile.d/*.sh; do
test -r "$profile" && . "$profile"
done
unset profile
fi
# Source global bash config
if test "$PS1" && test "$BASH" && test -r /etc/bash.bashrc; then
. /etc/bash.bashrc
fi
# Termcap is outdated, old, and crusty, kill it.
unset TERMCAP
# Man is much better than us at figuring this out
unset MANPATHMy script:
#!/bin/zsh
case "$1" in
true) # Enable power saving settings on battery
# Device Runtime-PM
#for dpcontrol in /sys/bus/{pci,spi,i2c}/devices/*/power/control; do echo auto > $dpcontrol; done
# Disable nmi_watchdog
echo 0 > /proc/sys/kernel/nmi_watchdog
# kernel write mode
echo 5 > /proc/sys/vm/laptop_mode
echo 1500 > /proc/sys/vm/dirty_writeback_centisecs
# disk powersave
hdparm -S 36 -B 128 /dev/sda &> /dev/null
for i in /sys/class/scsi_host/host*/link_power_management_policy; do echo min_power > $i; done
# sound card powersave
echo 60 > /sys/module/snd_hda_intel/parameters/power_save
echo Y > /sys/module/snd_hda_intel/parameters/power_save_controller
# wlan0 powersave
iwconfig wlan0 power on
# backlight
echo 2 > /sys/class/backlight/acpi_video0/brightness
;;
false) # Return to default on AC power
# Device Runtime-PM
#for dpcontrol in /sys/bus/{pci,spi,i2c}/devices/*/power/control; do echo on > $dpcontrol; done
# Enable nmi_watchdog
echo 1 > /proc/sys/kernel/nmi_watchdog
# kernel write mode
echo 0 > /proc/sys/vm/laptop_mode
echo 500 > /proc/sys/vm/dirty_writeback_centisecs
# disk powersave
hdparm -S 0 -B 254 /dev/sda &> /dev/null
for i in /sys/class/scsi_host/host*/link_power_management_policy; do echo max_performance > $i; done
# sound card powersave
echo 300 > /sys/module/snd_hda_intel/parameters/power_save
echo Y > /sys/module/snd_hda_intel/parameters/power_save_controller
# wlan0 powersave
iwconfig wlan0 power off
#backlight
echo 13 > /sys/class/backlight/acpi_video0/brightness
;;
esac
exit 0Thanks for any tip!
Last edited by Shark (2012-11-08 09:06:05)
If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline
I have solved the problem by creating file /etc/zsh/zshenv and write this down:
path=(/usr/local/bin /usr/bin /bin /usr/local/sbin /usr/sbin /sbin)If you have built castles in the air, your work need not be lost; that is where they should be. Now put foundations under them.
Henry David Thoreau
Registered Linux User: #559057
Offline