You are not logged in.
Hoi,
recently I get strange errors sometimes when I boot my Acer Aspire One. I replaced the 8GB HD with a 160gb HD from another Laptop and everything was fine for nearly 1/2 a year.
A screenshot is attached showing the error messages. I drop into root recovery console and with "e2fsck /dev/sda4" I can repair the damaged blocks, missing indices and so on.
Is this a sign that the HD goes bogus? Its nearly 6 Years old.
thanks in advance!
Offline
1. No screenshot attached.
2. Check dmesg ouput for anything HD related.
Offline
Use smartmontools to see what SMART says.
Offline
thats what I get from "smartctl /dev/sda4"
smartctl -a /dev/sda4
smartctl 6.0 2012-10-10 r3643 [i686-linux-3.6.5-1-ARCH] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD (80 GB and above)
Device Model: TOSHIBA MK2035GSS
Serial Number: 67SKF0COS
Firmware Version: DK022A
User Capacity: 200.049.647.616 bytes [200 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Wed Nov 7 14:03:13 2012 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 130) minutes.
SCT capabilities: (0x0001) SCT Status supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1107
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2930
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 1
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 045 045 000 Old_age Always - 22117
10 Spin_Retry_Count 0x0033 158 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2828
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 178
193 Load_Cycle_Count 0x0032 071 071 000 Old_age Always - 298637
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (0 83 255 255 0)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 2
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 8285
222 Loaded_Hours 0x0032 053 053 000 Old_age Always - 19082
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 298
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 87 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 87 occurred at disk power-on lifetime: 22055 hours (918 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 07 ef 7c 3b ea Error: UNC 7 sectors at LBA = 0x0a3b7cef = 171670767
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 ee 7c 3b ea 00 00:07:12.783 READ DMA
c8 00 08 a6 7c 3b ea 00 00:07:12.782 READ DMA
c8 00 08 9e 7c 3b ea 00 00:07:12.782 READ DMA
c8 00 08 96 7c 3b ea 00 00:07:12.781 READ DMA
c8 00 08 8e 7c 3b ea 00 00:07:12.781 READ DMA
Error 86 occurred at disk power-on lifetime: 22055 hours (918 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 3f ef 7c 3b ea Error: UNC 63 sectors at LBA = 0x0a3b7cef = 171670767
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 c0 6e 7c 3b ea 00 00:06:51.396 READ DMA
c8 00 80 ee 7b 3b ea 00 00:06:51.394 READ DMA
c8 00 40 ae 7b 3b ea 00 00:06:51.393 READ DMA
c8 00 40 2e 7b 3b ea 00 00:06:51.382 READ DMA
c8 00 40 ce 48 fb e9 00 00:06:51.364 READ DMA
Error 85 occurred at disk power-on lifetime: 22055 hours (918 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 8e 9f bc ee Error: UNC 8 sectors at LBA = 0x0ebc9f8e = 247242638
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 8e 9f bc ee 00 00:01:43.322 READ DMA
c8 00 80 ce 9f bc ee 00 00:01:34.697 READ DMA
27 00 00 00 00 00 e0 00 00:01:34.669 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:01:34.662 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:01:34.656 SET FEATURES [Set transfer mode]
Error 84 occurred at disk power-on lifetime: 22055 hours (918 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 40 8e 9f bc ee Error: UNC 64 sectors at LBA = 0x0ebc9f8e = 247242638
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 40 8e 9f bc ee 00 00:01:26.219 READ DMA
c8 00 20 6e 9f bc ee 00 00:01:26.218 READ DMA
c8 00 08 66 9f bc ee 00 00:01:26.218 READ DMA
c8 00 20 3e 9f bc ee 00 00:01:26.217 READ DMA
c8 00 08 36 9f bc ee 00 00:01:26.186 READ DMA
Error 83 occurred at disk power-on lifetime: 22055 hours (918 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 8e 9f bc ee Error: UNC 8 sectors at LBA = 0x0ebc9f8e = 247242638
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 8e 9f bc ee 00 00:00:52.848 READ DMA
c8 00 80 ce 9f bc ee 00 00:00:39.316 READ DMA
27 00 00 00 00 00 e0 00 00:00:39.312 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 00:00:39.305 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:00:39.305 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 16939 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Offline