You are not logged in.
Pages: 1
Topic closed
Hi All,
I am trying to configure the touch screen, for finger touch, for a Thinkpad X200 Tablet. Using xinput_calibrator, I got the correct Area values for having it calibrated, so with:
$ xsetwacom --set "Serial Wacom Tablet WACf008 touch" Area 43 81 952 937
I tested it and worked perfectly. To make the changes permanent, I created: /etc/X11/xorg.conf.d/99-calibration.conf
Section "InputClass"
Identifier "Touch Calibration"
MatchProduct "Serial Wacom Tablet WACf008 touch"
Option "Area" "43 81 952 937"
EndSection
But after rebooting, it doesn't work, it just takes the default uncalibrated values, as can be seen on:
$ xsetwacom --get "Serial Wacom Tablet WACf008 touch" "Area"
0 0 1024 1024
What I am doing wrong? I also tried setting MatchProduct "touch|Touch|TOUCH" just in case, but it doesn't work anyway.
Cheers,
Sergi
Offline
same problem here. 6 years later. unanswered.
Offline
Two posts. Two necrobumps. Don't make a third.
https://wiki.archlinux.org/index.php/Co … bumping.22
Closing.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Online
Pages: 1
Topic closed