You are not logged in.
I am trying to install arch 64 as a guest into virtualbox with ubuntu 32 bit as the host. I honestly have no idea what the problem could be, I have been cranking at this for days. I have tried removing the whole virtual disc drive and even manually pressing f12 and 1 at boot and still nothing.
hash of the image i am using
$ sha1sum archlinux-2012.11.01-dual.iso
bf9993b3dc724e5ca5a300bd9c53c7bc2a907743 archlinux-2012.11.01-dual.iso
What I type into virtualbox to get ssh running
$ passwd
[password]
[password]
$ systemctl enable sshd.service
$ systemctl start sshd.service
This is a little "script" I paste into my host terminal once connected via ssh so I do not make mistakes(which i have obviously).
$ parted -s /dev/sda mklabel gpt
$ parted -s /dev/sda mkpart "primary" "ext4" "1%" "99%"
$ mkfs.ext4 /dev/sda1
$ mount /dev/sda1 /mnt
$ pacstrap /mnt base base-devel
$ echo "/dev/sda1 / ext4 defaults 0 1" > /etc/fstab
$ arch-chroot /mnt
$ echo -e "en_US.UTF-8 UTF-8\nen_US ISO-8859-1" >> /etc/locale.gen
$ locale-gen
$ echo LANG=en_US.UTF-8 > /etc/locale.conf
$ export LANG=en_US.UTF-8
$ ln -s /usr/share/zoneinfo/America/Chicago /etc/localtime
$ hwclock --systohc --utc
$ pacman --noconfirm -S virtualbox-guest-utils
$ modprobe -a vboxguest vboxsf vboxvideo
$ echo -e "vboxguest\nvboxsf\nvboxvideo" > /etc/modules-load.d/virtualbox.conf
$ echo archbox-$(head /dev/urandom -c 2 | base64 | cut -c -3) > /etc/hostname #set hostname to archbox-[3 random base64 characters]
$ mkinitcpio -p linux
$ pacman --noconfirm -S grub-bios
$ grub-install --target=i386-pc --recheck /dev/sda
$ cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo
$ grub-mkconfig -o /boot/grub/grub.cfg
$ exit
$ umount /mnt
$ reboot
Last edited by zakioka (2012-11-22 21:27:34)
Offline
Did you check if your hardware support virtualisation?I can run only 32 bit in VM on my laptop.I think that you should read the wiki about installing Arch.I've never seen this method of installing.
Last edited by 10PinkPanther (2012-11-22 11:00:36)
Offline
And what about execution outputs? No errors during the installation, particularly when setting up grub? Is the MBR written to and the /dev/sda1 partition marked as bootable?
Offline
You can't run a 64 bit OS if you have a 32 bit CPU.
And you can't run a 64 bit OS if the host OS is 32 bit.
I remember that my PC rebooted when I tried a 64 bit copy of Windows 7 in VirtualBox (Arch i686 host). So my advice is to install Arch i686, or install (or upgrade to?) Ubuntu 64 bit as the host OS, if the CPU supports it.
I have made a personal commitment not to reply in topics that start with a lowercase letter. Proper grammar and punctuation is a sign of respect, and if you do not show any, you will NOT receive any help (at least not from me).
Offline
Did you check if your hardware support virtualisation?I can run only 32 bit in VM on my laptop.I think that you should read the wiki about installing Arch.I've never seen this method of installing.
Yes my hardware supports virtualization, my cpu is an AMD phenom 1090T, mobo is an asus crosshair formular IV. Installation of the 32bit version of arch failed as well. I will go into my bios and look around for some virtualization options, maybe somthing got changed.
And what about execution outputs? No errors during the installation, particularly when setting up grub? Is the MBR written to and the /dev/sda1 partition marked as bootable?
No errors output during execution (or at least important ones AFAIK), I have my console output for that bit. I am using GPT, and AFAIK, I have read nothing of setting a bootable flag for it, ill try another complete reinstall of arch doing this.
sh-4.2# pacman --noconfirm -S grub-bios
resolving dependencies...
looking for inter-conflicts...
Targets (4): freetype2-2.4.10-1 fuse-2.9.2-1 grub-common-2.00-1
grub-bios-2.00-1
Total Download Size: 4.87 MiB
Total Installed Size: 19.29 MiB
Proceed with installation? [Y/n]
:: Retrieving packages from core...
grub-common-2.00-1-... 3.7 MiB 663K/s 00:06 [######################] 100%
grub-bios-2.00-1-x86_64 581.7 KiB 1010K/s 00:01 [######################] 100%
:: Retrieving packages from extra...
freetype2-2.4.10-1-... 459.3 KiB 1219K/s 00:00 [######################] 100%
fuse-2.9.2-1-x86_64 137.2 KiB 841K/s 00:00 [######################] 100%
(4/4) checking package integrity [######################] 100%
(4/4) loading package files [######################] 100%
(4/4) checking for file conflicts [######################] 100%
warning: could not get filesystem information for /run/archiso/bootmnt: No such file or directory
warning: could not get filesystem information for /run/archiso/cowspace: No such file or directory
warning: could not get filesystem information for /run/archiso/sfs/root-image: No such file or directory
warning: could not get filesystem information for /run/archiso/sfs/usr-lib-modules: No such file or directory
warning: could not get filesystem information for /run/archiso/sfs/usr-share: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/systemd: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/cpuset: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/cpu,cpuacct: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/memory: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/devices: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/freezer: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/net_cls: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/blkio: No such file or directory
(4/4) checking available disk space [######################] 100%
(1/4) installing freetype2 [######################] 100%
(2/4) installing fuse [######################] 100%
(3/4) installing grub-common [######################] 100%
Generating grub.cfg.example config file...
This may fail on some machines running a custom kernel.
done.
Optional dependencies for grub-common
libisoburn: provides xorriso for generating grub rescue iso using
grub-mkrescue
os-prober: to detect other OSes when generating grub.cfg in BIOS systems
mtools: for grub-mkrescue FAT FS support
(4/4) installing grub-bios [######################] 100%
sh-4.2# grub-install --target=i386-pc --recheck /dev/sda
/usr/sbin/grub-bios-setup: warning: this GPT partition label contains no BIOS Boot Partition; embedding won't be possible.
/usr/sbin/grub-bios-setup: warning: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and their use is discouraged..
/usr/sbin/grub-bios-setup: error: will not proceed with blocklists.
sh-4.2# cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo
sh-4.2# grub-mkconfig -o /boot/grub/grub.cfg
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-linux
Found initrd image: /boot/initramfs-linux.img
done
sh-4.2# passwd
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
sh-4.2# exit
exit
arch-chroot /mnt 8.67s user 2.84s system 6% cpu 3:01.75 total
You can't run a 64 bit OS if you have a 32 bit CPU.
And you can't run a 64 bit OS if the host OS is 32 bit.
I remember that my PC rebooted when I tried a 64 bit copy of Windows 7 in VirtualBox (Arch i686 host). So my advice is to install Arch i686, or install (or upgrade to?) Ubuntu 64 bit as the host OS, if the CPU supports it.
This is not true per the VB manual, although I will further look at my bios settings and such. Additionally my OS is 32bit, not my cpu. My cpu/mobo config is a 1090T/crosshair formula IV. I also have tried and failed to install the arch 32 as well. I will look into using Ubuntu 64 as I actually accidentally installed 32 bit and didn't realize it until I was already comfortable.
Offline
So I went digging around in my mobo manual and did a search for "virtualization" and all that came up was an option for amd secure VM
Secure Virtual Machine [Enabled]
[Enabled] Enables the AMD Secure Virtual Machine.
[Disabled] Disables this function.
In my mobo, it is set to enabled, and it has never causes any problems before, so I left it.
Here is what I input to the host terminal
parted -s /dev/sda mklabel gpt
parted -s /dev/sda mkpart "primary" "ext4" "1%" "99%"
parted -s /dev/sda set 1 boot on
mkfs.ext4 /dev/sda1
mount /dev/sda1 /mnt
pacstrap /mnt base base-devel
echo "/dev/sda1 / ext4 defaults 0 1" > /etc/fstab
arch-chroot /mnt
echo -e "en_US.UTF-8 UTF-8\nen_US ISO-8859-1" >> /etc/locale.gen
locale-gen
echo LANG=en_US.UTF-8 > /etc/locale.conf
export LANG=en_US.UTF-8
ln -s /usr/share/zoneinfo/America/Chicago /etc/localtime
hwclock --systohc --utc
modprobe -a vboxguest vboxsf vboxvideo
echo -e "vboxguest\nvboxsf\nvboxvideo" > /etc/modules-load.d/virtualbox.conf
echo archbox-$(head /dev/urandom -c 2 | base64 | cut -c -3) > /etc/hostname
mkinitcpio -p linux
pacman --noconfirm -S grub-bios
grub-install --target=i386-pc --recheck /dev/sda
cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo
exit
umount /mnt
reboot
Here is the output (Again, all I changed was from the label/table type from gpt to msdos for MBR I think)
root@archiso ~ # parted -s /dev/sda mklabel gpt
root@archiso ~ # parted -s /dev/sda mkpart "primary" "ext4" "1%" "99%"
root@archiso ~ # parted -s /dev/sda set 1 boot on
root@archiso ~ # mkfs.ext4 /dev/sda1
mke2fs 1.42.6 (21-Sep-2012)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1028160 inodes, 4110336 blocks
205516 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4211081216
126 block groups
32768 blocks per group, 32768 fragments per group
8160 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
root@archiso ~ # mount /dev/sda1 /mnt
root@archiso ~ # pacstrap /mnt base base-devel
==> Creating install root at /mnt
==> Installing packages to /mnt
warning: database file for 'core' does not exist
warning: database file for 'extra' does not exist
warning: database file for 'community' does not exist
:: Synchronizing package databases...
core 106.1 KiB 315K/s 00:00 [##########################################################################] 100%
extra 1432.3 KiB 642K/s 00:02 [##########################################################################] 100%
community 1807.8 KiB 631K/s 00:03 [##########################################################################] 100%
:: There are 53 members in group base:
:: Repository core
1) bash 2) bzip2 3) coreutils 4) cronie 5) cryptsetup 6) device-mapper 7) dhcpcd 8) diffutils 9) e2fsprogs 10) file 11) filesystem 12) findutils 13) gawk 14) gcc-libs 15) gettext
16) glibc 17) grep 18) gzip 19) heirloom-mailx 20) inetutils 21) iproute2 22) iputils 23) jfsutils 24) less 25) licenses 26) linux 27) logrotate 28) lvm2 29) man-db 30) man-pages
31) mdadm 32) nano 33) netcfg 34) nss-myhostname 35) pacman 36) pciutils 37) pcmciautils 38) perl 39) ppp 40) procps-ng 41) psmisc 42) reiserfsprogs 43) sed 44) shadow 45) sysfsutils
46) systemd-sysvcompat 47) tar 48) texinfo 49) usbutils 50) util-linux 51) vi 52) which 53) xfsprogs
Enter a selection (default=all):
:: There are 12 members in group base-devel:
:: Repository core
1) autoconf 2) automake 3) binutils 4) bison 5) fakeroot 6) flex 7) gcc 8) libtool 9) m4 10) make 11) patch 12) pkg-config
Enter a selection (default=all):
resolving dependencies...
warning: dependency cycle detected:
warning: dbus-core will be installed before its systemd dependency
looking for inter-conflicts...
Targets (130): acl-2.2.51-2 archlinux-keyring-20121113-1 attr-2.4.46-2 ca-certificates-20121105-1 cloog-0.17.0-2 cracklib-2.8.19-1 curl-7.28.0-1 db-5.3.21-1 dbus-core-1.6.8-1 dirmngr-1.1.0-4
expat-2.1.0-1 gdbm-1.10-1 glib2-2.34.2-1 gmp-5.0.5-1 gnupg-2.0.19-2 gpgme-1.3.1-4 groff-1.21-2 hwids-20121022-1 iana-etc-2.30-3 iptables-1.4.16.2-1 isl-0.10-1 kbd-1.15.3-3
keyutils-1.5.5-3 kmod-11-2 krb5-1.10.3-1 libarchive-3.0.4-2 libassuan-2.0.3-1 libcap-2.22-3 libffi-3.0.11-1 libgcrypt-1.5.0-3 libgpg-error-1.10-2 libgssglue-0.4-1 libksba-1.2.0-1
libldap-2.4.33-1 libltdl-2.4.2-7 libmpc-1.0.1-1 libnl-3.2.11-1 libpcap-1.3.0-1 libpipeline-1.2.2-1 libsasl-2.1.23-9 libssh2-1.4.2-1 libtirpc-0.2.2-4 libusbx-1.0.14-1
linux-api-headers-3.6.3-1 linux-firmware-20120625-1 mkinitcpio-0.11.2-1 mkinitcpio-busybox-1.20.2-1 mpfr-3.1.1.p2-1 ncurses-5.9-3 openssl-1.0.1.c-1 pacman-mirrorlist-20120908-1
pam-1.1.6-1 pambase-20120701-1 pcre-8.31-1 pinentry-0.8.2-1 popt-1.16-5 ppl-1.0-1 pth-2.0.7-4 readline-6.2.004-1 run-parts-4.3.4-1 systemd-195-2 sysvinit-tools-2.88-9
tzdata-2012j-1 xz-5.0.4-1 zlib-1.2.7-1 autoconf-2.69-1 automake-1.12.5-1 bash-4.2.039-1 binutils-2.23.1-1 bison-2.6.5-1 bzip2-1.0.6-4 coreutils-8.20-1 cronie-1.4.8-4
cryptsetup-1.5.1-1 device-mapper-2.02.98-1 dhcpcd-5.6.2-1 diffutils-3.2-1 e2fsprogs-1.42.6-1 fakeroot-1.18.4-1 file-5.11-1 filesystem-2012.10-2 findutils-4.4.2-4 flex-2.5.37-1
gawk-4.0.1-1 gcc-4.7.2-2 gcc-libs-4.7.2-2 gettext-0.18.1.1-4 glibc-2.16.0-5 grep-2.14-1 gzip-1.5-1 heirloom-mailx-12.5-3 inetutils-1.9.1-4 iproute2-3.6.0-2 iputils-20121114-1
jfsutils-1.1.15-3 less-451-1 libtool-2.4.2-7 licenses-2.9-1 linux-3.6.6-1 logrotate-3.8.2-2 lvm2-2.02.98-1 m4-1.4.16-2 make-3.82-5 man-db-2.6.3-1 man-pages-3.44-1 mdadm-3.2.6-1
nano-2.2.6-2 netcfg-3.0-1 nss-myhostname-0.3-3 pacman-4.0.3-5 patch-2.7.1-1 pciutils-3.1.10-1 pcmciautils-018-4 perl-5.16.2-1 pkg-config-0.27.1-1 ppp-2.4.5-5 procps-ng-3.3.5-1
psmisc-22.19-1 reiserfsprogs-3.6.21-4 sed-4.2.1-4 shadow-4.1.5.1-2 sysfsutils-2.1.0-8 systemd-sysvcompat-195-2 tar-1.26-2 texinfo-4.13a-7 usbutils-006-1 util-linux-2.22.1-3
vi-1:050325-3 which-2.20-5 xfsprogs-3.1.8-2
Total Download Size: 151.84 MiB
Total Installed Size: 539.71 MiB
Proceed with installation? [Y/n]
:: Retrieving packages from core...
linux-api-headers-3.6.3-1-i686 616.3 KiB 530K/s 00:01 [##########################################################################] 100%
tzdata-2012j-1-any 140.1 KiB 635K/s 00:00 [##########################################################################] 100%
glibc-2.16.0-5-i686 7.8 MiB 985K/s 00:08 [##########################################################################] 100%
ncurses-5.9-3-i686 982.7 KiB 1513K/s 00:01 [##########################################################################] 100%
readline-6.2.004-1-i686 323.9 KiB 526K/s 00:01 [##########################################################################] 100%
bash-4.2.039-1-i686 774.1 KiB 1015K/s 00:01 [##########################################################################] 100%
bzip2-1.0.6-4-i686 54.4 KiB 3.58M/s 00:00 [##########################################################################] 100%
gcc-libs-4.7.2-2-i686 812.5 KiB 818K/s 00:01 [##########################################################################] 100%
db-5.3.21-1-i686 1427.7 KiB 1034K/s 00:01 [##########################################################################] 100%
zlib-1.2.7-1-i686 91.6 KiB 1336K/s 00:00 [##########################################################################] 100%
cracklib-2.8.19-1-i686 238.4 KiB 1332K/s 00:00 [##########################################################################] 100%
libgssglue-0.4-1-i686 33.4 KiB 2.36M/s 00:00 [##########################################################################] 100%
libtirpc-0.2.2-4-i686 179.2 KiB 1230K/s 00:00 [##########################################################################] 100%
pambase-20120701-1-any 1052.0 B 5.64M/s 00:00 [##########################################################################] 100%
pam-1.1.6-1-i686 632.2 KiB 1521K/s 00:00 [##########################################################################] 100%
attr-2.4.46-2-i686 64.7 KiB 280K/s 00:00 [##########################################################################] 100%
acl-2.2.51-2-i686 124.8 KiB 633K/s 00:00 [##########################################################################] 100%
gmp-5.0.5-1-i686 486.2 KiB 948K/s 00:01 [##########################################################################] 100%
libcap-2.22-3-i686 34.3 KiB 596K/s 00:00 [##########################################################################] 100%
coreutils-8.20-1-i686 2.0 MiB 1028K/s 00:02 [##########################################################################] 100%
run-parts-4.3.4-1-i686 19.0 KiB 3.09M/s 00:00 [##########################################################################] 100%
cronie-1.4.8-4-i686 56.0 KiB 954K/s 00:00 [##########################################################################] 100%
libgpg-error-1.10-2-i686 47.8 KiB 2.65M/s 00:00 [##########################################################################] 100%
libgcrypt-1.5.0-3-i686 305.8 KiB 1010K/s 00:00 [##########################################################################] 100%
shadow-4.1.5.1-2-i686 1024.5 KiB 1187K/s 00:01 [##########################################################################] 100%
util-linux-2.22.1-3-i686 1591.3 KiB 1141K/s 00:01 [##########################################################################] 100%
expat-2.1.0-1-i686 114.2 KiB 1631K/s 00:00 [##########################################################################] 100%
iana-etc-2.30-3-any 319.8 KiB 801K/s 00:00 [##########################################################################] 100%
nss-myhostname-0.3-3-i686 7.8 KiB 4.61M/s 00:00 [##########################################################################] 100%
filesystem-2012.10-2-any 5.9 KiB 3.94M/s 00:00 [##########################################################################] 100%
dbus-core-1.6.8-1-i686 414.8 KiB 1161K/s 00:00 [##########################################################################] 100%
pcre-8.31-1-i686 865.3 KiB 761K/s 00:01 [##########################################################################] 100%
libffi-3.0.11-1-i686 32.5 KiB 3.07M/s 00:00 [##########################################################################] 100%
glib2-2.34.2-1-i686 1864.0 KiB 1154K/s 00:02 [##########################################################################] 100%
kbd-1.15.3-3-i686 1000.5 KiB 1227K/s 00:01 [##########################################################################] 100%
kmod-11-2-i686 94.5 KiB 772K/s 00:00 [##########################################################################] 100%
hwids-20121022-1-any 278.0 KiB 1146K/s 00:00 [##########################################################################] 100%
xz-5.0.4-1-i686 246.5 KiB 507K/s 00:00 [##########################################################################] 100%
systemd-195-2-i686 1300.8 KiB 1282K/s 00:01 [##########################################################################] 100%
device-mapper-2.02.98-1-i686 151.9 KiB 1410K/s 00:00 [##########################################################################] 100%
popt-1.16-5-i686 65.2 KiB 387K/s 00:00 [##########################################################################] 100%
cryptsetup-1.5.1-1-i686 162.3 KiB 718K/s 00:00 [##########################################################################] 100%
dhcpcd-5.6.2-1-i686 71.8 KiB 1122K/s 00:00 [##########################################################################] 100%
diffutils-3.2-1-i686 216.4 KiB 1191K/s 00:00 [##########################################################################] 100%
e2fsprogs-1.42.6-1-i686 752.4 KiB 943K/s 00:01 [##########################################################################] 100%
file-5.11-1-i686 213.1 KiB 1145K/s 00:00 [##########################################################################] 100%
findutils-4.4.2-4-i686 336.2 KiB 726K/s 00:00 [##########################################################################] 100%
gawk-4.0.1-1-i686 762.2 KiB 1374K/s 00:01 [##########################################################################] 100%
gettext-0.18.1.1-4-i686 4.9 MiB 1205K/s 00:04 [##########################################################################] 100%
grep-2.14-1-i686 191.7 KiB 1402K/s 00:00 [##########################################################################] 100%
gzip-1.5-1-i686 72.3 KiB 1259K/s 00:00 [##########################################################################] 100%
gdbm-1.10-1-i686 86.6 KiB 1391K/s 00:00 [##########################################################################] 100%
perl-5.16.2-1-i686 12.0 MiB 1226K/s 00:10 [##########################################################################] 100%
openssl-1.0.1.c-1-i686 2.5 MiB 1106K/s 00:02 [##########################################################################] 100%
libsasl-2.1.23-9-i686 115.4 KiB 368K/s 00:00 [##########################################################################] 100%
libldap-2.4.33-1-i686 400.6 KiB 721K/s 00:01 [##########################################################################] 100%
keyutils-1.5.5-3-i686 54.8 KiB 975K/s 00:00 [##########################################################################] 100%
krb5-1.10.3-1-i686 1043.5 KiB 1227K/s 00:01 [##########################################################################] 100%
heirloom-mailx-12.5-3-i686 197.1 KiB 1449K/s 00:00 [##########################################################################] 100%
inetutils-1.9.1-4-i686 234.2 KiB 1632K/s 00:00 [##########################################################################] 100%
iptables-1.4.16.2-1-i686 237.6 KiB 1360K/s 00:00 [##########################################################################] 100%
iproute2-3.6.0-2-i686 424.8 KiB 610K/s 00:01 [##########################################################################] 100%
sysfsutils-2.1.0-8-i686 29.5 KiB 2.03M/s 00:00 [##########################################################################] 100%
iputils-20121114-1-i686 64.3 KiB 1002K/s 00:00 [##########################################################################] 100%
jfsutils-1.1.15-3-i686 169.1 KiB 1258K/s 00:00 [##########################################################################] 100%
less-451-1-i686 88.4 KiB 1238K/s 00:00 [##########################################################################] 100%
licenses-2.9-1-any 59.4 KiB 3.93M/s 00:00 [##########################################################################] 100%
linux-firmware-20120625-1-any 15.1 MiB 1293K/s 00:12 [##########################################################################] 100%
mkinitcpio-busybox-1.20.2-1-i686 156.5 KiB 1433K/s 00:00 [##########################################################################] 100%
libarchive-3.0.4-2-i686 633.5 KiB 1744K/s 00:00 [##########################################################################] 100%
mkinitcpio-0.11.2-1-any 28.6 KiB 4.26M/s 00:00 [##########################################################################] 100%
linux-3.6.6-1-i686 40.9 MiB 1501K/s 00:28 [##########################################################################] 100%
logrotate-3.8.2-2-i686 28.8 KiB 4.00M/s 00:00 [##########################################################################] 100%
lvm2-2.02.98-1-i686 638.2 KiB 877K/s 00:01 [##########################################################################] 100%
texinfo-4.13a-7-i686 658.5 KiB 1560K/s 00:00 [##########################################################################] 100%
groff-1.21-2-i686 1615.7 KiB 1095K/s 00:01 [##########################################################################] 100%
libpipeline-1.2.2-1-i686 32.6 KiB 4.12M/s 00:00 [##########################################################################] 100%
man-db-2.6.3-1-i686 344.7 KiB 1068K/s 00:00 [##########################################################################] 100%
man-pages-3.44-1-any 4.4 MiB 1557K/s 00:03 [##########################################################################] 100%
mdadm-3.2.6-1-i686 266.5 KiB 453K/s 00:01 [##########################################################################] 100%
nano-2.2.6-2-i686 294.8 KiB 1252K/s 00:00 [##########################################################################] 100%
netcfg-3.0-1-any 29.6 KiB 193K/s 00:00 [##########################################################################] 100%
sed-4.2.1-4-i686 107.2 KiB 484K/s 00:00 [##########################################################################] 100%
ca-certificates-20121105-1-any 134.1 KiB 705K/s 00:00 [##########################################################################] 100%
libssh2-1.4.2-1-i686 202.0 KiB 1130K/s 00:00 [##########################################################################] 100%
curl-7.28.0-1-i686 574.2 KiB 862K/s 00:01 [##########################################################################] 100%
pth-2.0.7-4-i686 76.2 KiB 272K/s 00:00 [##########################################################################] 100%
libksba-1.2.0-1-i686 110.8 KiB 650K/s 00:00 [##########################################################################] 100%
libassuan-2.0.3-1-i686 77.1 KiB 766K/s 00:00 [##########################################################################] 100%
pinentry-0.8.2-1-i686 93.6 KiB 1315K/s 00:00 [##########################################################################] 100%
dirmngr-1.1.0-4-i686 161.9 KiB 1280K/s 00:00 [##########################################################################] 100%
gnupg-2.0.19-2-i686 1427.4 KiB 1870K/s 00:01 [##########################################################################] 100%
gpgme-1.3.1-4-i686 205.6 KiB 1506K/s 00:00 [##########################################################################] 100%
pacman-mirrorlist-20120908-1-any 2.2 KiB 10.7M/s 00:00 [##########################################################################] 100%
archlinux-keyring-20121113-1-any 338.4 KiB 427K/s 00:01 [##########################################################################] 100%
pacman-4.0.3-5-i686 522.9 KiB 1216K/s 00:00 [##########################################################################] 100%
pciutils-3.1.10-1-i686 82.1 KiB 3.35M/s 00:00 [##########################################################################] 100%
pcmciautils-018-4-i686 18.4 KiB 3.69M/s 00:00 [##########################################################################] 100%
libnl-3.2.11-1-i686 198.8 KiB 1522K/s 00:00 [##########################################################################] 100%
libusbx-1.0.14-1-i686 40.4 KiB 171K/s 00:00 [##########################################################################] 100%
libpcap-1.3.0-1-i686 191.4 KiB 222K/s 00:01 [##########################################################################] 100%
ppp-2.4.5-5-i686 263.8 KiB 544K/s 00:00 [##########################################################################] 100%
procps-ng-3.3.5-1-i686 211.6 KiB 627K/s 00:00 [##########################################################################] 100%
psmisc-22.19-1-i686 83.7 KiB 746K/s 00:00 [##########################################################################] 100%
reiserfsprogs-3.6.21-4-i686 215.9 KiB 924K/s 00:00 [##########################################################################] 100%
sysvinit-tools-2.88-9-i686 25.3 KiB 4.14M/s 00:00 [##########################################################################] 100%
systemd-sysvcompat-195-2-i686 5.4 KiB 5.72M/s 00:00 [##########################################################################] 100%
tar-1.26-2-i686 560.6 KiB 837K/s 00:01 [##########################################################################] 100%
usbutils-006-1-i686 50.6 KiB 861K/s 00:00 [##########################################################################] 100%
vi-1:050325-3-i686 131.6 KiB 829K/s 00:00 [##########################################################################] 100%
which-2.20-5-i686 13.4 KiB 4.28M/s 00:00 [##########################################################################] 100%
xfsprogs-3.1.8-2-i686 632.2 KiB 991K/s 00:01 [##########################################################################] 100%
m4-1.4.16-2-i686 158.5 KiB 1308K/s 00:00 [##########################################################################] 100%
autoconf-2.69-1-any 580.6 KiB 946K/s 00:01 [##########################################################################] 100%
automake-1.12.5-1-any 569.1 KiB 1244K/s 00:00 [##########################################################################] 100%
binutils-2.23.1-1-i686 3.5 MiB 1036K/s 00:03 [##########################################################################] 100%
bison-2.6.5-1-i686 437.5 KiB 967K/s 00:00 [##########################################################################] 100%
fakeroot-1.18.4-1-i686 53.8 KiB 311K/s 00:00 [##########################################################################] 100%
flex-2.5.37-1-i686 773.5 KiB 976K/s 00:01 [##########################################################################] 100%
mpfr-3.1.1.p2-1-i686 367.0 KiB 818K/s 00:00 [##########################################################################] 100%
libmpc-1.0.1-1-i686 89.7 KiB 422K/s 00:00 [##########################################################################] 100%
isl-0.10-1-i686 643.1 KiB 1134K/s 00:01 [##########################################################################] 100%
cloog-0.17.0-2-i686 103.1 KiB 1628K/s 00:00 [##########################################################################] 100%
ppl-1.0-1-i686 3.1 MiB 1153K/s 00:03 [##########################################################################] 100%
gcc-4.7.2-2-i686 17.6 MiB 1397K/s 00:13 [##########################################################################] 100%
libltdl-2.4.2-7-i686 154.0 KiB 1439K/s 00:00 [##########################################################################] 100%
libtool-2.4.2-7-i686 268.1 KiB 1041K/s 00:00 [##########################################################################] 100%
make-3.82-5-i686 346.3 KiB 1197K/s 00:00 [##########################################################################] 100%
patch-2.7.1-1-i686 78.3 KiB 593K/s 00:00 [##########################################################################] 100%
pkg-config-0.27.1-1-i686 29.0 KiB 2.16M/s 00:00 [##########################################################################] 100%
(130/130) checking package integrity [##########################################################################] 100%
(130/130) loading package files [##########################################################################] 100%
(130/130) checking for file conflicts [##########################################################################] 100%
(130/130) checking available disk space [##########################################################################] 100%
( 1/130) installing linux-api-headers [##########################################################################] 100%
( 2/130) installing tzdata [##########################################################################] 100%
( 3/130) installing glibc [##########################################################################] 100%
( 4/130) installing ncurses [##########################################################################] 100%
( 5/130) installing readline [##########################################################################] 100%
( 6/130) installing bash [##########################################################################] 100%
( 7/130) installing bzip2 [##########################################################################] 100%
( 8/130) installing gcc-libs [##########################################################################] 100%
( 9/130) installing db [##########################################################################] 100%
( 10/130) installing zlib [##########################################################################] 100%
( 11/130) installing cracklib [##########################################################################] 100%
( 12/130) installing libgssglue [##########################################################################] 100%
( 13/130) installing libtirpc [##########################################################################] 100%
( 14/130) installing pambase [##########################################################################] 100%
( 15/130) installing pam [##########################################################################] 100%
( 16/130) installing attr [##########################################################################] 100%
( 17/130) installing acl [##########################################################################] 100%
( 18/130) installing gmp [##########################################################################] 100%
( 19/130) installing libcap [##########################################################################] 100%
( 20/130) installing coreutils [##########################################################################] 100%
( 21/130) installing run-parts [##########################################################################] 100%
( 22/130) installing cronie [##########################################################################] 100%
Optional dependencies for cronie
pm-utils: defer anacron when on battery power
smtp-server: sending cron job output via email
( 23/130) installing libgpg-error [##########################################################################] 100%
( 24/130) installing libgcrypt [##########################################################################] 100%
( 25/130) installing shadow [##########################################################################] 100%
( 26/130) installing util-linux [##########################################################################] 100%
( 27/130) installing expat [##########################################################################] 100%
( 28/130) installing iana-etc [##########################################################################] 100%
( 29/130) installing nss-myhostname [##########################################################################] 100%
( 30/130) installing filesystem [##########################################################################] 100%
( 31/130) installing dbus-core [##########################################################################] 100%
( 32/130) installing pcre [##########################################################################] 100%
( 33/130) installing libffi [##########################################################################] 100%
( 34/130) installing glib2 [##########################################################################] 100%
Optional dependencies for glib2
python2: for gdbus-codegen
( 35/130) installing kbd [##########################################################################] 100%
( 36/130) installing kmod [##########################################################################] 100%
( 37/130) installing hwids [##########################################################################] 100%
( 38/130) installing xz [##########################################################################] 100%
( 39/130) installing systemd [##########################################################################] 100%
Initializing machine ID from random generator.
ln -s '/usr/lib/systemd/system/getty@.service' '/etc/systemd/system/getty.target.wants/getty@tty1.service'
:: Append 'init=/bin/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd
Optional dependencies for systemd
initscripts: legacy support for /etc/rc.conf
python: systemd library bindings
python2-cairo: systemd-analyze
python2-dbus: systemd-analyze
systemd-sysvcompat: symlink package to provide sysvinit binaries
cryptsetup: required for encrypted block devices
quota-tools: kernel-level quota management
( 40/130) installing device-mapper [##########################################################################] 100%
( 41/130) installing popt [##########################################################################] 100%
( 42/130) installing cryptsetup [##########################################################################] 100%
( 43/130) installing dhcpcd [##########################################################################] 100%
( 44/130) installing diffutils [##########################################################################] 100%
( 45/130) installing e2fsprogs [##########################################################################] 100%
( 46/130) installing file [##########################################################################] 100%
( 47/130) installing findutils [##########################################################################] 100%
( 48/130) installing gawk [##########################################################################] 100%
( 49/130) installing gettext [##########################################################################] 100%
Optional dependencies for gettext
cvs: for autopoint tool
( 50/130) installing grep [##########################################################################] 100%
( 51/130) installing gzip [##########################################################################] 100%
( 52/130) installing gdbm [##########################################################################] 100%
( 53/130) installing perl [##########################################################################] 100%
( 54/130) installing openssl [##########################################################################] 100%
Optional dependencies for openssl
ca-certificates
( 55/130) installing libsasl [##########################################################################] 100%
( 56/130) installing libldap [##########################################################################] 100%
( 57/130) installing keyutils [##########################################################################] 100%
( 58/130) installing krb5 [##########################################################################] 100%
( 59/130) installing heirloom-mailx [##########################################################################] 100%
Optional dependencies for heirloom-mailx
smtp-forwarder: for sending mail
( 60/130) installing inetutils [##########################################################################] 100%
( 61/130) installing iptables [##########################################################################] 100%
( 62/130) installing iproute2 [##########################################################################] 100%
Optional dependencies for iproute2
linux-atm: ATM support
( 63/130) installing sysfsutils [##########################################################################] 100%
( 64/130) installing iputils [##########################################################################] 100%
Optional dependencies for iputils
xinetd: for tftpd
( 65/130) installing jfsutils [##########################################################################] 100%
( 66/130) installing less [##########################################################################] 100%
( 67/130) installing licenses [##########################################################################] 100%
( 68/130) installing linux-firmware [##########################################################################] 100%
( 69/130) installing mkinitcpio-busybox [##########################################################################] 100%
( 70/130) installing libarchive [##########################################################################] 100%
( 71/130) installing mkinitcpio [##########################################################################] 100%
Optional dependencies for mkinitcpio
xz: Use lzma or xz compression for the initramfs image
bzip2: Use bzip2 compression for the initramfs image
lzop: Use lzo compression for the initramfs image
mkinitcpio-nfs-utils: Support for root filesystem on NFS
( 72/130) installing linux [##########################################################################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.6.6-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.6.6-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
Optional dependencies for linux
crda: to set the correct wireless channels of your country
( 73/130) installing logrotate [##########################################################################] 100%
Optional dependencies for logrotate
cron: scheduled log rotation
( 74/130) installing lvm2 [##########################################################################] 100%
( 75/130) installing texinfo [##########################################################################] 100%
( 76/130) installing groff [##########################################################################] 100%
Optional dependencies for groff
netpbm: for use together with man -H command interaction in browsers
psutils: for use together with man -H command interaction in browsers
( 77/130) installing libpipeline [##########################################################################] 100%
( 78/130) installing man-db [##########################################################################] 100%
it's recommended to create an initial
database running as root:
"/usr/bin/mandb --quiet"
Optional dependencies for man-db
less
gzip
( 79/130) installing man-pages [##########################################################################] 100%
( 80/130) installing mdadm [##########################################################################] 100%
( 81/130) installing nano [##########################################################################] 100%
( 82/130) installing netcfg [##########################################################################] 100%
Optional dependencies for netcfg
dialog: for the menu based profile and wifi selectors
wpa_supplicant: for wireless networking support
ifplugd: for automatic wired connections through net-auto-wired
wpa_actiond: for automatic wireless connections through net-auto-wireless
wireless_tools: for interface renaming through net-rename
ifenslave: for bond connections
bridge-utils: for bridge connections
( 83/130) installing sed [##########################################################################] 100%
( 84/130) installing ca-certificates [##########################################################################] 100%
( 85/130) installing libssh2 [##########################################################################] 100%
( 86/130) installing curl [##########################################################################] 100%
( 87/130) installing pth [##########################################################################] 100%
( 88/130) installing libksba [##########################################################################] 100%
( 89/130) installing libassuan [##########################################################################] 100%
( 90/130) installing pinentry [##########################################################################] 100%
Optional dependencies for pinentry
gtk2: for gtk2 backend
qt: for qt4 backend
( 91/130) installing dirmngr [##########################################################################] 100%
( 92/130) installing gnupg [##########################################################################] 100%
Optional dependencies for gnupg
curl: gpg2keys_curl
libldap: gpg2keys_ldap
libusb-compat: scdaemon
texinfo: documentation
( 93/130) installing gpgme [##########################################################################] 100%
( 94/130) installing pacman-mirrorlist [##########################################################################] 100%
( 95/130) installing archlinux-keyring [##########################################################################] 100%
( 96/130) installing pacman [##########################################################################] 100%
>>> Run `pacman-key --init; pacman-key --populate archlinux`
>>> to import the data required by pacman for package verification.
>>> See: https://www.archlinux.org/news/having-pacman-verify-packages
Optional dependencies for pacman
fakeroot: for makepkg usage as normal user
( 97/130) installing pciutils [##########################################################################] 100%
( 98/130) installing pcmciautils [##########################################################################] 100%
( 99/130) installing libnl [##########################################################################] 100%
(100/130) installing libusbx [##########################################################################] 100%
(101/130) installing libpcap [##########################################################################] 100%
(102/130) installing ppp [##########################################################################] 100%
(103/130) installing procps-ng [##########################################################################] 100%
(104/130) installing psmisc [##########################################################################] 100%
(105/130) installing reiserfsprogs [##########################################################################] 100%
(106/130) installing sysvinit-tools [##########################################################################] 100%
(107/130) installing systemd-sysvcompat [##########################################################################] 100%
(108/130) installing tar [##########################################################################] 100%
(109/130) installing usbutils [##########################################################################] 100%
Optional dependencies for usbutils
python2: for lsusb.py usage
coreutils: for lsusb.py usage
(110/130) installing vi [##########################################################################] 100%
Optional dependencies for vi
heirloom-mailx: used by the preserve command for notification
(111/130) installing which [##########################################################################] 100%
(112/130) installing xfsprogs [##########################################################################] 100%
(113/130) installing m4 [##########################################################################] 100%
(114/130) installing autoconf [##########################################################################] 100%
(115/130) installing automake [##########################################################################] 100%
(116/130) installing binutils [##########################################################################] 100%
(117/130) installing bison [##########################################################################] 100%
(118/130) installing fakeroot [##########################################################################] 100%
(119/130) installing flex [##########################################################################] 100%
(120/130) installing mpfr [##########################################################################] 100%
(121/130) installing libmpc [##########################################################################] 100%
(122/130) installing isl [##########################################################################] 100%
(123/130) installing cloog [##########################################################################] 100%
(124/130) installing ppl [##########################################################################] 100%
(125/130) installing gcc [##########################################################################] 100%
(126/130) installing libltdl [##########################################################################] 100%
(127/130) installing libtool [##########################################################################] 100%
(128/130) installing make [##########################################################################] 100%
(129/130) installing patch [##########################################################################] 100%
Optional dependencies for patch
ed: for patch -e functionality
(130/130) installing pkg-config [##########################################################################] 100%
pacstrap /mnt base base-devel 37.52s user 8.24s system 21% cpu 3:28.65 total
root@archiso ~ # echo "/dev/sda1 / ext4 defaults 0 1" > /etc/fstab
root@archiso ~ #
root@archiso ~ # arch-chroot /mnt
sh-4.2#
sh-4.2# echo -e "en_US.UTF-8 UTF-8\nen_US ISO-8859-1" >> /etc/locale.gen
sh-4.2# locale-gen
Generating locales...
en_US.UTF-8... done
en_US.ISO-8859-1... done
Generation complete.
sh-4.2# echo LANG=en_US.UTF-8 > /etc/locale.conf
sh-4.2# export LANG=en_US.UTF-8
sh-4.2# ln -s /usr/share/zoneinfo/America/Chicago /etc/localtime
sh-4.2# hwclock --systohc --utc
sh-4.2#
sh-4.2# modprobe -a vboxguest vboxsf vboxvideo
sh-4.2# echo -e "vboxguest\nvboxsf\nvboxvideo" > /etc/modules-load.d/virtualbox.conf
sh-4.2#
sh-4.2# echo archbox-$(head /dev/urandom -c 2 | base64 | cut -c -3) > /etc/hostname
sh-4.2#
sh-4.2# mkinitcpio -p linux
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.6.6-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.6.6-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
sh-4.2# pacman -S grub-bios
resolving dependencies...
looking for inter-conflicts...
Targets (4): freetype2-2.4.10-1 fuse-2.9.2-1 grub-common-2.00-1 grub-bios-2.00-1
Total Download Size: 4.99 MiB
Total Installed Size: 18.74 MiB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
grub-common-2.00-1-i686 3.7 MiB 944K/s 00:04 [##########################################################################] 100%
grub-bios-2.00-1-i686 576.5 KiB 934K/s 00:01 [##########################################################################] 100%
:: Retrieving packages from extra...
freetype2-2.4.10-1-i686 568.8 KiB 1056K/s 00:01 [##########################################################################] 100%
fuse-2.9.2-1-i686 160.3 KiB 1186K/s 00:00 [##########################################################################] 100%
(4/4) checking package integrity [##########################################################################] 100%
(4/4) loading package files [##########################################################################] 100%
(4/4) checking for file conflicts [##########################################################################] 100%
warning: could not get filesystem information for /run/archiso/bootmnt: No such file or directory
warning: could not get filesystem information for /run/archiso/cowspace: No such file or directory
warning: could not get filesystem information for /run/archiso/sfs/root-image: No such file or directory
warning: could not get filesystem information for /run/archiso/sfs/usr-lib-modules: No such file or directory
warning: could not get filesystem information for /run/archiso/sfs/usr-share: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/systemd: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/cpuset: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/cpu,cpuacct: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/memory: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/devices: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/freezer: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/net_cls: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/blkio: No such file or directory
(4/4) checking available disk space [##########################################################################] 100%
(1/4) installing freetype2 [##########################################################################] 100%
(2/4) installing fuse [##########################################################################] 100%
(3/4) installing grub-common [##########################################################################] 100%
Generating grub.cfg.example config file...
This may fail on some machines running a custom kernel.
done.
Optional dependencies for grub-common
libisoburn: provides xorriso for generating grub rescue iso using grub-mkrescue
os-prober: to detect other OSes when generating grub.cfg in BIOS systems
mtools: for grub-mkrescue FAT FS support
(4/4) installing grub-bios [##########################################################################] 100%
sh-4.2# grub-install --target=i386-pc --recheck /dev/sda
/usr/sbin/grub-bios-setup: warning: this GPT partition label contains no BIOS Boot Partition; embedding won't be possible.
/usr/sbin/grub-bios-setup: warning: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and their use is discouraged..
/usr/sbin/grub-bios-setup: error: will not proceed with blocklists.
sh-4.2# cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo
sh-4.2# exit
exit
arch-chroot /mnt 5.34s user 1.81s system 12% cpu 59.375 total
root@archiso ~ # umount /mnt
root@archiso ~ # reboot
It says
error: no such device: [some device ID here]
Loading Linux core repo kernel ...
error: no such parition.
Loading initial ramdisk ...
error: you need to load the kernel first.
Press any key to continue...
There is the line
/usr/sbin/grub-bios-setup: warning: this GPT partition label contains no BIOS Boot Partition; embedding won't be possible.
How do I fix this?
The system now says "booting..." but never does
--------------------------
edit0:
So I tried the label or table type "msdos" and got better results. When the system boots I get to the grub menu and select the first option and its gives me this
Here is everything that came out of the terminal this time.
root@archiso ~ # parted -s /dev/sda mklabel msdos
root@archiso ~ # parted -s /dev/sda mkpart "primary" "ext4" "1%" "99%"
root@archiso ~ # parted -s /dev/sda set 1 boot on
root@archiso ~ # mkfs.ext4 /dev/sda1
mke2fs 1.42.6 (21-Sep-2012)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
1028160 inodes, 4110336 blocks
205516 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4211081216
126 block groups
32768 blocks per group, 32768 fragments per group
8160 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
root@archiso ~ # mount /dev/sda1 /mnt
root@archiso ~ #
root@archiso ~ # pacstrap /mnt base base-devel
==> Creating install root at /mnt
==> Installing packages to /mnt
warning: database file for 'core' does not exist
warning: database file for 'extra' does not exist
warning: database file for 'community' does not exist
:: Synchronizing package databases...
core 106.1 KiB 269K/s 00:00 [##########################################################################] 100%
extra 1432.4 KiB 551K/s 00:03 [##########################################################################] 100%
community 1807.8 KiB 660K/s 00:03 [##########################################################################] 100%
:: There are 53 members in group base:
:: Repository core
1) bash 2) bzip2 3) coreutils 4) cronie 5) cryptsetup 6) device-mapper 7) dhcpcd 8) diffutils 9) e2fsprogs 10) file 11) filesystem 12) findutils 13) gawk 14) gcc-libs 15) gettext
16) glibc 17) grep 18) gzip 19) heirloom-mailx 20) inetutils 21) iproute2 22) iputils 23) jfsutils 24) less 25) licenses 26) linux 27) logrotate 28) lvm2 29) man-db 30) man-pages
31) mdadm 32) nano 33) netcfg 34) nss-myhostname 35) pacman 36) pciutils 37) pcmciautils 38) perl 39) ppp 40) procps-ng 41) psmisc 42) reiserfsprogs 43) sed 44) shadow 45) sysfsutils
46) systemd-sysvcompat 47) tar 48) texinfo 49) usbutils 50) util-linux 51) vi 52) which 53) xfsprogs
Enter a selection (default=all):
:: There are 12 members in group base-devel:
:: Repository core
1) autoconf 2) automake 3) binutils 4) bison 5) fakeroot 6) flex 7) gcc 8) libtool 9) m4 10) make 11) patch 12) pkg-config
Enter a selection (default=all):
resolving dependencies...
warning: dependency cycle detected:
warning: dbus-core will be installed before its systemd dependency
looking for inter-conflicts...
Targets (130): acl-2.2.51-2 archlinux-keyring-20121113-1 attr-2.4.46-2 ca-certificates-20121105-1 cloog-0.17.0-2 cracklib-2.8.19-1 curl-7.28.0-1 db-5.3.21-1 dbus-core-1.6.8-1 dirmngr-1.1.0-4
expat-2.1.0-1 gdbm-1.10-1 glib2-2.34.2-1 gmp-5.0.5-1 gnupg-2.0.19-2 gpgme-1.3.1-4 groff-1.21-2 hwids-20121022-1 iana-etc-2.30-3 iptables-1.4.16.2-1 isl-0.10-1 kbd-1.15.3-3
keyutils-1.5.5-3 kmod-11-2 krb5-1.10.3-1 libarchive-3.0.4-2 libassuan-2.0.3-1 libcap-2.22-3 libffi-3.0.11-1 libgcrypt-1.5.0-3 libgpg-error-1.10-2 libgssglue-0.4-1 libksba-1.2.0-1
libldap-2.4.33-1 libltdl-2.4.2-7 libmpc-1.0.1-1 libnl-3.2.11-1 libpcap-1.3.0-1 libpipeline-1.2.2-1 libsasl-2.1.23-9 libssh2-1.4.2-1 libtirpc-0.2.2-4 libusbx-1.0.14-1
linux-api-headers-3.6.3-1 linux-firmware-20120625-1 mkinitcpio-0.11.2-1 mkinitcpio-busybox-1.20.2-1 mpfr-3.1.1.p2-1 ncurses-5.9-3 openssl-1.0.1.c-1 pacman-mirrorlist-20120908-1
pam-1.1.6-1 pambase-20120701-1 pcre-8.31-1 pinentry-0.8.2-1 popt-1.16-5 ppl-1.0-1 pth-2.0.7-4 readline-6.2.004-1 run-parts-4.3.4-1 systemd-195-2 sysvinit-tools-2.88-9
tzdata-2012j-1 xz-5.0.4-1 zlib-1.2.7-1 autoconf-2.69-1 automake-1.12.5-1 bash-4.2.039-1 binutils-2.23.1-1 bison-2.6.5-1 bzip2-1.0.6-4 coreutils-8.20-1 cronie-1.4.8-4
cryptsetup-1.5.1-1 device-mapper-2.02.98-1 dhcpcd-5.6.2-1 diffutils-3.2-1 e2fsprogs-1.42.6-1 fakeroot-1.18.4-1 file-5.11-1 filesystem-2012.10-2 findutils-4.4.2-4 flex-2.5.37-1
gawk-4.0.1-1 gcc-4.7.2-2 gcc-libs-4.7.2-2 gettext-0.18.1.1-4 glibc-2.16.0-5 grep-2.14-1 gzip-1.5-1 heirloom-mailx-12.5-3 inetutils-1.9.1-4 iproute2-3.6.0-2 iputils-20121114-1
jfsutils-1.1.15-3 less-451-1 libtool-2.4.2-7 licenses-2.9-1 linux-3.6.6-1 logrotate-3.8.2-2 lvm2-2.02.98-1 m4-1.4.16-2 make-3.82-5 man-db-2.6.3-1 man-pages-3.44-1 mdadm-3.2.6-1
nano-2.2.6-2 netcfg-3.0-1 nss-myhostname-0.3-3 pacman-4.0.3-5 patch-2.7.1-1 pciutils-3.1.10-1 pcmciautils-018-4 perl-5.16.2-1 pkg-config-0.27.1-1 ppp-2.4.5-5 procps-ng-3.3.5-1
psmisc-22.19-1 reiserfsprogs-3.6.21-4 sed-4.2.1-4 shadow-4.1.5.1-2 sysfsutils-2.1.0-8 systemd-sysvcompat-195-2 tar-1.26-2 texinfo-4.13a-7 usbutils-006-1 util-linux-2.22.1-3
vi-1:050325-3 which-2.20-5 xfsprogs-3.1.8-2
Total Download Size: 151.84 MiB
Total Installed Size: 539.71 MiB
Proceed with installation? [Y/n]
:: Retrieving packages from core...
linux-api-headers-3.6.3-1-i686 616.3 KiB 414K/s 00:01 [##########################################################################] 100%
tzdata-2012j-1-any 140.1 KiB 551K/s 00:00 [##########################################################################] 100%
glibc-2.16.0-5-i686 7.8 MiB 1065K/s 00:07 [##########################################################################] 100%
ncurses-5.9-3-i686 982.7 KiB 1023K/s 00:01 [##########################################################################] 100%
readline-6.2.004-1-i686 323.9 KiB 953K/s 00:00 [##########################################################################] 100%
bash-4.2.039-1-i686 774.1 KiB 935K/s 00:01 [##########################################################################] 100%
bzip2-1.0.6-4-i686 54.4 KiB 2.55M/s 00:00 [##########################################################################] 100%
gcc-libs-4.7.2-2-i686 812.5 KiB 1013K/s 00:01 [##########################################################################] 100%
db-5.3.21-1-i686 1427.7 KiB 984K/s 00:01 [##########################################################################] 100%
zlib-1.2.7-1-i686 91.6 KiB 1163K/s 00:00 [##########################################################################] 100%
cracklib-2.8.19-1-i686 238.4 KiB 1053K/s 00:00 [##########################################################################] 100%
libgssglue-0.4-1-i686 33.4 KiB 1568K/s 00:00 [##########################################################################] 100%
libtirpc-0.2.2-4-i686 179.2 KiB 1134K/s 00:00 [##########################################################################] 100%
pambase-20120701-1-any 1052.0 B 5.83M/s 00:00 [##########################################################################] 100%
pam-1.1.6-1-i686 632.2 KiB 1000K/s 00:01 [##########################################################################] 100%
attr-2.4.46-2-i686 64.7 KiB 606K/s 00:00 [##########################################################################] 100%
acl-2.2.51-2-i686 124.8 KiB 860K/s 00:00 [##########################################################################] 100%
gmp-5.0.5-1-i686 486.2 KiB 614K/s 00:01 [##########################################################################] 100%
libcap-2.22-3-i686 34.3 KiB 308K/s 00:00 [##########################################################################] 100%
coreutils-8.20-1-i686 2.0 MiB 1028K/s 00:02 [##########################################################################] 100%
run-parts-4.3.4-1-i686 19.0 KiB 1264K/s 00:00 [##########################################################################] 100%
cronie-1.4.8-4-i686 56.0 KiB 1223K/s 00:00 [##########################################################################] 100%
libgpg-error-1.10-2-i686 47.8 KiB 1245K/s 00:00 [##########################################################################] 100%
libgcrypt-1.5.0-3-i686 305.8 KiB 1111K/s 00:00 [##########################################################################] 100%
shadow-4.1.5.1-2-i686 1024.5 KiB 1034K/s 00:01 [##########################################################################] 100%
util-linux-2.22.1-3-i686 1591.3 KiB 1199K/s 00:01 [##########################################################################] 100%
expat-2.1.0-1-i686 114.2 KiB 293K/s 00:00 [##########################################################################] 100%
iana-etc-2.30-3-any 319.8 KiB 618K/s 00:01 [##########################################################################] 100%
nss-myhostname-0.3-3-i686 7.8 KiB 2.58M/s 00:00 [##########################################################################] 100%
filesystem-2012.10-2-any 5.9 KiB 2.72M/s 00:00 [##########################################################################] 100%
dbus-core-1.6.8-1-i686 414.8 KiB 806K/s 00:01 [##########################################################################] 100%
pcre-8.31-1-i686 865.3 KiB 1365K/s 00:01 [##########################################################################] 100%
libffi-3.0.11-1-i686 32.5 KiB 544K/s 00:00 [##########################################################################] 100%
glib2-2.34.2-1-i686 1864.0 KiB 1104K/s 00:02 [##########################################################################] 100%
kbd-1.15.3-3-i686 1000.5 KiB 1019K/s 00:01 [##########################################################################] 100%
kmod-11-2-i686 94.5 KiB 1097K/s 00:00 [##########################################################################] 100%
hwids-20121022-1-any 278.0 KiB 1283K/s 00:00 [##########################################################################] 100%
xz-5.0.4-1-i686 246.5 KiB 807K/s 00:00 [##########################################################################] 100%
systemd-195-2-i686 1300.8 KiB 916K/s 00:01 [##########################################################################] 100%
device-mapper-2.02.98-1-i686 151.9 KiB 685K/s 00:00 [##########################################################################] 100%
popt-1.16-5-i686 65.2 KiB 1000K/s 00:00 [##########################################################################] 100%
cryptsetup-1.5.1-1-i686 162.3 KiB 1205K/s 00:00 [##########################################################################] 100%
dhcpcd-5.6.2-1-i686 71.8 KiB 874K/s 00:00 [##########################################################################] 100%
diffutils-3.2-1-i686 216.4 KiB 886K/s 00:00 [##########################################################################] 100%
e2fsprogs-1.42.6-1-i686 752.4 KiB 1047K/s 00:01 [##########################################################################] 100%
file-5.11-1-i686 213.1 KiB 1372K/s 00:00 [##########################################################################] 100%
findutils-4.4.2-4-i686 336.2 KiB 522K/s 00:01 [##########################################################################] 100%
gawk-4.0.1-1-i686 762.2 KiB 1104K/s 00:01 [##########################################################################] 100%
gettext-0.18.1.1-4-i686 4.9 MiB 1125K/s 00:05 [##########################################################################] 100%
grep-2.14-1-i686 191.7 KiB 424K/s 00:00 [##########################################################################] 100%
gzip-1.5-1-i686 72.3 KiB 876K/s 00:00 [##########################################################################] 100%
gdbm-1.10-1-i686 86.6 KiB 933K/s 00:00 [##########################################################################] 100%
perl-5.16.2-1-i686 12.0 MiB 1206K/s 00:10 [##########################################################################] 100%
openssl-1.0.1.c-1-i686 2.5 MiB 1178K/s 00:02 [##########################################################################] 100%
libsasl-2.1.23-9-i686 115.4 KiB 1011K/s 00:00 [##########################################################################] 100%
libldap-2.4.33-1-i686 400.6 KiB 519K/s 00:01 [##########################################################################] 100%
keyutils-1.5.5-3-i686 54.8 KiB 2.39M/s 00:00 [##########################################################################] 100%
krb5-1.10.3-1-i686 1043.5 KiB 1080K/s 00:01 [##########################################################################] 100%
heirloom-mailx-12.5-3-i686 197.1 KiB 681K/s 00:00 [##########################################################################] 100%
inetutils-1.9.1-4-i686 234.2 KiB 1098K/s 00:00 [##########################################################################] 100%
iptables-1.4.16.2-1-i686 237.6 KiB 1321K/s 00:00 [##########################################################################] 100%
iproute2-3.6.0-2-i686 424.8 KiB 590K/s 00:01 [##########################################################################] 100%
sysfsutils-2.1.0-8-i686 29.5 KiB 2.20M/s 00:00 [##########################################################################] 100%
iputils-20121114-1-i686 64.3 KiB 1134K/s 00:00 [##########################################################################] 100%
jfsutils-1.1.15-3-i686 169.1 KiB 1153K/s 00:00 [##########################################################################] 100%
less-451-1-i686 88.4 KiB 726K/s 00:00 [##########################################################################] 100%
licenses-2.9-1-any 59.4 KiB 897K/s 00:00 [##########################################################################] 100%
linux-firmware-20120625-1-any 15.1 MiB 1365K/s 00:11 [##########################################################################] 100%
mkinitcpio-busybox-1.20.2-1-i686 156.5 KiB 1479K/s 00:00 [##########################################################################] 100%
libarchive-3.0.4-2-i686 633.5 KiB 714K/s 00:01 [##########################################################################] 100%
mkinitcpio-0.11.2-1-any 28.6 KiB 1468K/s 00:00 [##########################################################################] 100%
linux-3.6.6-1-i686 40.9 MiB 1390K/s 00:30 [##########################################################################] 100%
logrotate-3.8.2-2-i686 28.8 KiB 1421K/s 00:00 [##########################################################################] 100%
lvm2-2.02.98-1-i686 638.2 KiB 1007K/s 00:01 [##########################################################################] 100%
texinfo-4.13a-7-i686 658.5 KiB 978K/s 00:01 [##########################################################################] 100%
groff-1.21-2-i686 1615.7 KiB 987K/s 00:02 [##########################################################################] 100%
libpipeline-1.2.2-1-i686 32.6 KiB 485K/s 00:00 [##########################################################################] 100%
man-db-2.6.3-1-i686 344.7 KiB 831K/s 00:00 [##########################################################################] 100%
man-pages-3.44-1-any 4.4 MiB 1212K/s 00:04 [##########################################################################] 100%
mdadm-3.2.6-1-i686 266.5 KiB 1092K/s 00:00 [##########################################################################] 100%
nano-2.2.6-2-i686 294.8 KiB 655K/s 00:00 [##########################################################################] 100%
netcfg-3.0-1-any 29.6 KiB 2.18M/s 00:00 [##########################################################################] 100%
sed-4.2.1-4-i686 107.2 KiB 1401K/s 00:00 [##########################################################################] 100%
ca-certificates-20121105-1-any 134.1 KiB 400K/s 00:00 [##########################################################################] 100%
libssh2-1.4.2-1-i686 202.0 KiB 923K/s 00:00 [##########################################################################] 100%
curl-7.28.0-1-i686 574.2 KiB 646K/s 00:01 [##########################################################################] 100%
pth-2.0.7-4-i686 76.2 KiB 414K/s 00:00 [##########################################################################] 100%
libksba-1.2.0-1-i686 110.8 KiB 780K/s 00:00 [##########################################################################] 100%
libassuan-2.0.3-1-i686 77.1 KiB 271K/s 00:00 [##########################################################################] 100%
pinentry-0.8.2-1-i686 93.6 KiB 689K/s 00:00 [##########################################################################] 100%
dirmngr-1.1.0-4-i686 161.9 KiB 1118K/s 00:00 [##########################################################################] 100%
gnupg-2.0.19-2-i686 1427.4 KiB 1085K/s 00:01 [##########################################################################] 100%
gpgme-1.3.1-4-i686 205.6 KiB 879K/s 00:00 [##########################################################################] 100%
pacman-mirrorlist-20120908-1-any 2.2 KiB 7.98M/s 00:00 [##########################################################################] 100%
archlinux-keyring-20121113-1-any 338.4 KiB 1142K/s 00:00 [##########################################################################] 100%
pacman-4.0.3-5-i686 522.9 KiB 1243K/s 00:00 [##########################################################################] 100%
pciutils-3.1.10-1-i686 82.1 KiB 1259K/s 00:00 [##########################################################################] 100%
pcmciautils-018-4-i686 18.4 KiB 2.34M/s 00:00 [##########################################################################] 100%
libnl-3.2.11-1-i686 198.8 KiB 1391K/s 00:00 [##########################################################################] 100%
libusbx-1.0.14-1-i686 40.4 KiB 2.91M/s 00:00 [##########################################################################] 100%
libpcap-1.3.0-1-i686 191.4 KiB 430K/s 00:00 [##########################################################################] 100%
ppp-2.4.5-5-i686 263.8 KiB 519K/s 00:01 [##########################################################################] 100%
procps-ng-3.3.5-1-i686 211.6 KiB 892K/s 00:00 [##########################################################################] 100%
psmisc-22.19-1-i686 83.7 KiB 1128K/s 00:00 [##########################################################################] 100%
reiserfsprogs-3.6.21-4-i686 215.9 KiB 772K/s 00:00 [##########################################################################] 100%
sysvinit-tools-2.88-9-i686 25.3 KiB 2.10M/s 00:00 [##########################################################################] 100%
systemd-sysvcompat-195-2-i686 5.4 KiB 1659K/s 00:00 [##########################################################################] 100%
tar-1.26-2-i686 560.6 KiB 887K/s 00:01 [##########################################################################] 100%
usbutils-006-1-i686 50.6 KiB 228K/s 00:00 [##########################################################################] 100%
vi-1:050325-3-i686 131.6 KiB 634K/s 00:00 [##########################################################################] 100%
which-2.20-5-i686 13.4 KiB 1209K/s 00:00 [##########################################################################] 100%
xfsprogs-3.1.8-2-i686 632.2 KiB 1049K/s 00:01 [##########################################################################] 100%
m4-1.4.16-2-i686 158.5 KiB 372K/s 00:00 [##########################################################################] 100%
autoconf-2.69-1-any 580.6 KiB 889K/s 00:01 [##########################################################################] 100%
automake-1.12.5-1-any 569.1 KiB 1014K/s 00:01 [##########################################################################] 100%
binutils-2.23.1-1-i686 3.5 MiB 990K/s 00:04 [##########################################################################] 100%
bison-2.6.5-1-i686 437.5 KiB 570K/s 00:01 [##########################################################################] 100%
fakeroot-1.18.4-1-i686 53.8 KiB 451K/s 00:00 [##########################################################################] 100%
flex-2.5.37-1-i686 773.5 KiB 920K/s 00:01 [##########################################################################] 100%
mpfr-3.1.1.p2-1-i686 367.0 KiB 596K/s 00:01 [##########################################################################] 100%
libmpc-1.0.1-1-i686 89.7 KiB 1373K/s 00:00 [##########################################################################] 100%
isl-0.10-1-i686 643.1 KiB 1132K/s 00:01 [##########################################################################] 100%
cloog-0.17.0-2-i686 103.1 KiB 850K/s 00:00 [##########################################################################] 100%
ppl-1.0-1-i686 3.1 MiB 996K/s 00:03 [##########################################################################] 100%
gcc-4.7.2-2-i686 17.6 MiB 1335K/s 00:13 [##########################################################################] 100%
libltdl-2.4.2-7-i686 154.0 KiB 933K/s 00:00 [##########################################################################] 100%
libtool-2.4.2-7-i686 268.1 KiB 408K/s 00:01 [##########################################################################] 100%
make-3.82-5-i686 346.3 KiB 639K/s 00:01 [##########################################################################] 100%
patch-2.7.1-1-i686 78.3 KiB 559K/s 00:00 [##########################################################################] 100%
pkg-config-0.27.1-1-i686 29.0 KiB 3.42M/s 00:00 [##########################################################################] 100%
(130/130) checking package integrity [##########################################################################] 100%
(130/130) loading package files [##########################################################################] 100%
(130/130) checking for file conflicts [##########################################################################] 100%
(130/130) checking available disk space [##########################################################################] 100%
( 1/130) installing linux-api-headers [##########################################################################] 100%
( 2/130) installing tzdata [##########################################################################] 100%
( 3/130) installing glibc [##########################################################################] 100%
( 4/130) installing ncurses [##########################################################################] 100%
( 5/130) installing readline [##########################################################################] 100%
( 6/130) installing bash [##########################################################################] 100%
( 7/130) installing bzip2 [##########################################################################] 100%
( 8/130) installing gcc-libs [##########################################################################] 100%
( 9/130) installing db [##########################################################################] 100%
( 10/130) installing zlib [##########################################################################] 100%
( 11/130) installing cracklib [##########################################################################] 100%
( 12/130) installing libgssglue [##########################################################################] 100%
( 13/130) installing libtirpc [##########################################################################] 100%
( 14/130) installing pambase [##########################################################################] 100%
( 15/130) installing pam [##########################################################################] 100%
( 16/130) installing attr [##########################################################################] 100%
( 17/130) installing acl [##########################################################################] 100%
( 18/130) installing gmp [##########################################################################] 100%
( 19/130) installing libcap [##########################################################################] 100%
( 20/130) installing coreutils [##########################################################################] 100%
( 21/130) installing run-parts [##########################################################################] 100%
( 22/130) installing cronie [##########################################################################] 100%
Optional dependencies for cronie
pm-utils: defer anacron when on battery power
smtp-server: sending cron job output via email
( 23/130) installing libgpg-error [##########################################################################] 100%
( 24/130) installing libgcrypt [##########################################################################] 100%
( 25/130) installing shadow [##########################################################################] 100%
( 26/130) installing util-linux [##########################################################################] 100%
( 27/130) installing expat [##########################################################################] 100%
( 28/130) installing iana-etc [##########################################################################] 100%
( 29/130) installing nss-myhostname [##########################################################################] 100%
( 30/130) installing filesystem [##########################################################################] 100%
( 31/130) installing dbus-core [##########################################################################] 100%
( 32/130) installing pcre [##########################################################################] 100%
( 33/130) installing libffi [##########################################################################] 100%
( 34/130) installing glib2 [##########################################################################] 100%
Optional dependencies for glib2
python2: for gdbus-codegen
( 35/130) installing kbd [##########################################################################] 100%
( 36/130) installing kmod [##########################################################################] 100%
( 37/130) installing hwids [##########################################################################] 100%
( 38/130) installing xz [##########################################################################] 100%
( 39/130) installing systemd [##########################################################################] 100%
Initializing machine ID from random generator.
ln -s '/usr/lib/systemd/system/getty@.service' '/etc/systemd/system/getty.target.wants/getty@tty1.service'
:: Append 'init=/bin/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd
Optional dependencies for systemd
initscripts: legacy support for /etc/rc.conf
python: systemd library bindings
python2-cairo: systemd-analyze
python2-dbus: systemd-analyze
systemd-sysvcompat: symlink package to provide sysvinit binaries
cryptsetup: required for encrypted block devices
quota-tools: kernel-level quota management
( 40/130) installing device-mapper [##########################################################################] 100%
( 41/130) installing popt [##########################################################################] 100%
( 42/130) installing cryptsetup [##########################################################################] 100%
( 43/130) installing dhcpcd [##########################################################################] 100%
( 44/130) installing diffutils [##########################################################################] 100%
( 45/130) installing e2fsprogs [##########################################################################] 100%
( 46/130) installing file [##########################################################################] 100%
( 47/130) installing findutils [##########################################################################] 100%
( 48/130) installing gawk [##########################################################################] 100%
( 49/130) installing gettext [##########################################################################] 100%
Optional dependencies for gettext
cvs: for autopoint tool
( 50/130) installing grep [##########################################################################] 100%
( 51/130) installing gzip [##########################################################################] 100%
( 52/130) installing gdbm [##########################################################################] 100%
( 53/130) installing perl [##########################################################################] 100%
( 54/130) installing openssl [##########################################################################] 100%
Optional dependencies for openssl
ca-certificates
( 55/130) installing libsasl [##########################################################################] 100%
( 56/130) installing libldap [##########################################################################] 100%
( 57/130) installing keyutils [##########################################################################] 100%
( 58/130) installing krb5 [##########################################################################] 100%
( 59/130) installing heirloom-mailx [##########################################################################] 100%
Optional dependencies for heirloom-mailx
smtp-forwarder: for sending mail
( 60/130) installing inetutils [##########################################################################] 100%
( 61/130) installing iptables [##########################################################################] 100%
( 62/130) installing iproute2 [##########################################################################] 100%
Optional dependencies for iproute2
linux-atm: ATM support
( 63/130) installing sysfsutils [##########################################################################] 100%
( 64/130) installing iputils [##########################################################################] 100%
Optional dependencies for iputils
xinetd: for tftpd
( 65/130) installing jfsutils [##########################################################################] 100%
( 66/130) installing less [##########################################################################] 100%
( 67/130) installing licenses [##########################################################################] 100%
( 68/130) installing linux-firmware [##########################################################################] 100%
( 69/130) installing mkinitcpio-busybox [##########################################################################] 100%
( 70/130) installing libarchive [##########################################################################] 100%
( 71/130) installing mkinitcpio [##########################################################################] 100%
Optional dependencies for mkinitcpio
xz: Use lzma or xz compression for the initramfs image
bzip2: Use bzip2 compression for the initramfs image
lzop: Use lzo compression for the initramfs image
mkinitcpio-nfs-utils: Support for root filesystem on NFS
( 72/130) installing linux [##########################################################################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.6.6-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.6.6-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
Optional dependencies for linux
crda: to set the correct wireless channels of your country
( 73/130) installing logrotate [##########################################################################] 100%
Optional dependencies for logrotate
cron: scheduled log rotation
( 74/130) installing lvm2 [##########################################################################] 100%
( 75/130) installing texinfo [##########################################################################] 100%
( 76/130) installing groff [##########################################################################] 100%
Optional dependencies for groff
netpbm: for use together with man -H command interaction in browsers
psutils: for use together with man -H command interaction in browsers
( 77/130) installing libpipeline [##########################################################################] 100%
( 78/130) installing man-db [##########################################################################] 100%
it's recommended to create an initial
database running as root:
"/usr/bin/mandb --quiet"
Optional dependencies for man-db
less
gzip
( 79/130) installing man-pages [##########################################################################] 100%
( 80/130) installing mdadm [##########################################################################] 100%
( 81/130) installing nano [##########################################################################] 100%
( 82/130) installing netcfg [##########################################################################] 100%
Optional dependencies for netcfg
dialog: for the menu based profile and wifi selectors
wpa_supplicant: for wireless networking support
ifplugd: for automatic wired connections through net-auto-wired
wpa_actiond: for automatic wireless connections through net-auto-wireless
wireless_tools: for interface renaming through net-rename
ifenslave: for bond connections
bridge-utils: for bridge connections
( 83/130) installing sed [##########################################################################] 100%
( 84/130) installing ca-certificates [##########################################################################] 100%
( 85/130) installing libssh2 [##########################################################################] 100%
( 86/130) installing curl [##########################################################################] 100%
( 87/130) installing pth [##########################################################################] 100%
( 88/130) installing libksba [##########################################################################] 100%
( 89/130) installing libassuan [##########################################################################] 100%
( 90/130) installing pinentry [##########################################################################] 100%
Optional dependencies for pinentry
gtk2: for gtk2 backend
qt: for qt4 backend
( 91/130) installing dirmngr [##########################################################################] 100%
( 92/130) installing gnupg [##########################################################################] 100%
Optional dependencies for gnupg
curl: gpg2keys_curl
libldap: gpg2keys_ldap
libusb-compat: scdaemon
texinfo: documentation
( 93/130) installing gpgme [##########################################################################] 100%
( 94/130) installing pacman-mirrorlist [##########################################################################] 100%
( 95/130) installing archlinux-keyring [##########################################################################] 100%
( 96/130) installing pacman [##########################################################################] 100%
>>> Run `pacman-key --init; pacman-key --populate archlinux`
>>> to import the data required by pacman for package verification.
>>> See: https://www.archlinux.org/news/having-pacman-verify-packages
Optional dependencies for pacman
fakeroot: for makepkg usage as normal user
( 97/130) installing pciutils [##########################################################################] 100%
( 98/130) installing pcmciautils [##########################################################################] 100%
( 99/130) installing libnl [##########################################################################] 100%
(100/130) installing libusbx [##########################################################################] 100%
(101/130) installing libpcap [##########################################################################] 100%
(102/130) installing ppp [##########################################################################] 100%
(103/130) installing procps-ng [##########################################################################] 100%
(104/130) installing psmisc [##########################################################################] 100%
(105/130) installing reiserfsprogs [##########################################################################] 100%
(106/130) installing sysvinit-tools [##########################################################################] 100%
(107/130) installing systemd-sysvcompat [##########################################################################] 100%
(108/130) installing tar [##########################################################################] 100%
(109/130) installing usbutils [##########################################################################] 100%
Optional dependencies for usbutils
python2: for lsusb.py usage
coreutils: for lsusb.py usage
(110/130) installing vi [##########################################################################] 100%
Optional dependencies for vi
heirloom-mailx: used by the preserve command for notification
(111/130) installing which [##########################################################################] 100%
(112/130) installing xfsprogs [##########################################################################] 100%
(113/130) installing m4 [##########################################################################] 100%
(114/130) installing autoconf [##########################################################################] 100%
(115/130) installing automake [##########################################################################] 100%
(116/130) installing binutils [##########################################################################] 100%
(117/130) installing bison [##########################################################################] 100%
(118/130) installing fakeroot [##########################################################################] 100%
(119/130) installing flex [##########################################################################] 100%
(120/130) installing mpfr [##########################################################################] 100%
(121/130) installing libmpc [##########################################################################] 100%
(122/130) installing isl [##########################################################################] 100%
(123/130) installing cloog [##########################################################################] 100%
(124/130) installing ppl [##########################################################################] 100%
(125/130) installing gcc [##########################################################################] 100%
(126/130) installing libltdl [##########################################################################] 100%
(127/130) installing libtool [##########################################################################] 100%
(128/130) installing make [##########################################################################] 100%
(129/130) installing patch [##########################################################################] 100%
Optional dependencies for patch
ed: for patch -e functionality
(130/130) installing pkg-config [##########################################################################] 100%
pacstrap /mnt base base-devel 38.23s user 6.78s system 21% cpu 3:30.29 total
root@archiso ~ #
root@archiso ~ # echo "/dev/sda1 / ext4 defaults 0 1" > /etc/fstab
root@archiso ~ #
root@archiso ~ # arch-chroot /mnt
sh-4.2#
sh-4.2# echo -e "en_US.UTF-8 UTF-8\nen_US ISO-8859-1" >> /etc/locale.gen
sh-4.2# locale-gen
Generating locales...
en_US.UTF-8... done
en_US.ISO-8859-1... done
Generation complete.
sh-4.2# echo LANG=en_US.UTF-8 > /etc/locale.conf
sh-4.2# export LANG=en_US.UTF-8
sh-4.2# ln -s /usr/share/zoneinfo/America/Chicago /etc/localtime
sh-4.2# hwclock --systohc --utc
sh-4.2#
sh-4.2# modprobe -a vboxguest vboxsf vboxvideo
sh-4.2# echo -e "vboxguest\nvboxsf\nvboxvideo" > /etc/modules-load.d/virtualbox.conf
sh-4.2#
sh-4.2# echo archbox-$(head /dev/urandom -c 2 | base64 | cut -c -3) > /etc/hostname
sh-4.2#
sh-4.2# mkinitcpio -p linux
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.6.6-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.6.6-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
sh-4.2#
sh-4.2# pacman --noconfirm -S grub-bios
resolving dependencies...
looking for inter-conflicts...
Targets (4): freetype2-2.4.10-1 fuse-2.9.2-1 grub-common-2.00-1 grub-bios-2.00-1
Total Download Size: 4.99 MiB
Total Installed Size: 18.74 MiB
Proceed with installation? [Y/n]
:: Retrieving packages from core...
grub-common-2.00-1-i686 3.7 MiB 721K/s 00:05 [##########################################################################] 100%
grub-bios-2.00-1-i686 576.5 KiB 1124K/s 00:01 [##########################################################################] 100%
:: Retrieving packages from extra...
freetype2-2.4.10-1-i686 568.8 KiB 664K/s 00:01 [##########################################################################] 100%
fuse-2.9.2-1-i686 160.3 KiB 600K/s 00:00 [##########################################################################] 100%
(4/4) checking package integrity [##########################################################################] 100%
(4/4) loading package files [##########################################################################] 100%
(4/4) checking for file conflicts [##########################################################################] 100%
warning: could not get filesystem information for /run/archiso/bootmnt: No such file or directory
warning: could not get filesystem information for /run/archiso/cowspace: No such file or directory
warning: could not get filesystem information for /run/archiso/sfs/root-image: No such file or directory
warning: could not get filesystem information for /run/archiso/sfs/usr-lib-modules: No such file or directory
warning: could not get filesystem information for /run/archiso/sfs/usr-share: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/systemd: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/cpuset: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/cpu,cpuacct: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/memory: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/devices: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/freezer: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/net_cls: No such file or directory
warning: could not get filesystem information for /sys/fs/cgroup/blkio: No such file or directory
(4/4) checking available disk space [##########################################################################] 100%
(1/4) installing freetype2 [##########################################################################] 100%
(2/4) installing fuse [##########################################################################] 100%
(3/4) installing grub-common [##########################################################################] 100%
Generating grub.cfg.example config file...
This may fail on some machines running a custom kernel.
done.
Optional dependencies for grub-common
libisoburn: provides xorriso for generating grub rescue iso using grub-mkrescue
os-prober: to detect other OSes when generating grub.cfg in BIOS systems
mtools: for grub-mkrescue FAT FS support
(4/4) installing grub-bios [##########################################################################] 100%
sh-4.2# grub-install --target=i386-pc --recheck /dev/sda
Installation finished. No error reported.
sh-4.2# cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo
sh-4.2#
sh-4.2# exit
exit
arch-chroot /mnt 5.67s user 2.03s system 10% cpu 1:11.44 total
Last edited by zakioka (2012-11-22 19:02:38)
Offline
https://wiki.archlinux.org/index.php/Be … Guide#GRUB
Read the second note. Either create an empty partition, or don't partition the virtual drive as GPT.
Edit: "error: no such device: ..." is because you didn't re-generate the grub.cfg file, as per the Beginners' Guide instructions:
# grub-mkconfig -o /boot/grub/grub.cfg
Last edited by DSpider (2012-11-22 19:08:56)
I have made a personal commitment not to reply in topics that start with a lowercase letter. Proper grammar and punctuation is a sign of respect, and if you do not show any, you will NOT receive any help (at least not from me).
Offline
https://wiki.archlinux.org/index.php/Be … Guide#GRUB
Read the second note. Either create an empty partition, or don't partition the virtual drive as GPT.
This is what I did according to some of the GNU parted pages and the arch wiki. (I started from scratch, and here is everything I ran)
parted -s /dev/sda mklabel gpt
parted -s /dev/sda mkpart "primary" "fat16" "50MB" "60MB"
parted -s /dev/sda mkpart "primary" "ext4" "1%" "99%"
parted -s /dev/sda set 1 bios_grub on
and it boots, although I get some sort of error, does it matter or is it fine?
edit to your edit: yes i seen that and corrected it.
Last edited by zakioka (2012-11-22 19:42:02)
Offline
The message regarding the SMBus address has greeted me during all my years of Arch under VirtualBox, so I guess it's harmless. Nice job documenting/automating the installation. And I guess this one can be marked as solved?
Offline
Alright then, thanks for all the help with this.
Offline