You are not logged in.
- Topics: Active | Unanswered
#1 2005-01-31 15:49:48
- Moo-Crumpus
- Member
- From: Hessen / Germany
- Registered: 2003-12-01
- Posts: 1,487
digital tv (dvb-t) - knowledge collection
'lo.
I own an terratec cinergyT2 usb dvb-t device, and have it connected to my pc. Allthough the antenna is too poor to recieve anything at all, I want to try to get the thing set up properly.
I can add following parts of installation, if they contain no errors:
done - udev ruleset to have nodes in /dev/dvb/adapter0/... style
done - udev permission set
testing - channels.conf for vcd or xine, mplayer, at least for ffm / germany
As the module is loaded without an error, I thought mplayer dvb://zdf could do the job now. Well, it isn't. Some parts are still missing. At this stage, I am not sure if it is a mplayer- or xine-config problem, or still an hardware / driver / kernel issue.
If someone else is working on similar stuff, we might try work it out, together.
Frumpus ♥ addict
[mu'.krum.pus], [frum.pus]
Offline
#2 2005-01-31 18:12:00
- Moo-Crumpus
- Member
- From: Hessen / Germany
- Registered: 2003-12-01
- Posts: 1,487
Re: digital tv (dvb-t) - knowledge collection
Here is my udev part:
[udev.rules]
#dvb
KERNEL="dvb[0-9].dvr*", NAME="dvb/adapter%n/dvr%n"
KERNEL="dvb[0-9].demux*", NAME="dvb/adapter%n/demux%n"
KERNEL="dvb[0-9].frontend*", NAME="dvb/adapter%n/frontend%n"
KERNEL="dvb[0-9].audio*", NAME="dvb/adapter%n/audio%n"
KERNEL="dvb[0-9].ca*", NAME="dvb/adapter%n/ca%n"
KERNEL="dvb[0-9].osd*", NAME="dvb/adapter%n/osd%n"
KERNEL="dvb[0-9].net*", NAME="dvb/adapter%n/net%n"
KERNEL="dvb[0-9].video*", NAME="dvb/adapter%n/video%n"[udev.permissions]
dvb/*:$local:video:0770
dvb:$local:video:0770
dvb/adapter*:$local:video:0770Frumpus ♥ addict
[mu'.krum.pus], [frum.pus]
Offline
#3 2005-01-31 18:13:59
- Moo-Crumpus
- Member
- From: Hessen / Germany
- Registered: 2003-12-01
- Posts: 1,487
Re: digital tv (dvb-t) - knowledge collection
Take care, channels.conf syntax differs from app to app.
Place in ~.xine/channels.conf or ~.mplayer/channels.conf
This channels.conf is for Germany/RheinMain/Frankfurt am Main:
Das Erste:198500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:101:102:1
arte:198500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:201:202:2
PHOENIX:198500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:301:302:3
ARD-MHP-Data:198500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:0:16
Doku/KiKa:482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:593:594:517
Info/3sat:482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:561:562:515
ZDF:482000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:545:546:514
RTL Television:578000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:337:338:16405
RTL2:578000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:353:354:16406
Super RTL:578000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:369:370:16411
VOX:578000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:545:546:16418
N24:738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:225:226:16398
KABEL1:738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:161:162:16394
ProSieben:738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:305:306:16403
SAT.1:738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:385:386:16408
EinsFestival:762000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:701:702:5
ARD-MHP-Data:762000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:0:0:16
Bayerisches FS:762000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:501:502:33
hr-fernsehen:762000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:401:402:65
SÜDWEST RP:762000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:601:602:226
rheinmaintv:818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:2817:2818:19200
TERRA NOVA:818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:609:610:16422
Eurosport:818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:577:578:16420
tvnah:818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:2833:2834:19216 Frumpus ♥ addict
[mu'.krum.pus], [frum.pus]
Offline
#4 2005-01-31 18:14:50
- Moo-Crumpus
- Member
- From: Hessen / Germany
- Registered: 2003-12-01
- Posts: 1,487
Re: digital tv (dvb-t) - knowledge collection
Das Same as above, but for vdr. Place in /etc/vdr/channels.conf:
Das Erste:198500:I0B7C34D12M16T8G4Y0:T:27500:101:102:104:0:1:0:0:0
arte:198500:I0B7C34D12M16T8G4Y0:T:27500:201:202,203:204:0:2:0:0:0
PHOENIX:198500:I0B7C34D12M16T8G4Y0:T:27500:301:302:304:0:3:0:0:0
ZDF:482000:I0B8C23D999M16T8G4Y0:T:27500:545:546,547;559:551:0:514:0:0:0
Info/3sat:482000:I0B8C23D23M16T8G4Y0:T:27500:561:562,563:567:0:515:0:0:0
Doku/KiKa:482000:I0B8C23D23M16T8G4Y0:T:27500:593:594:599:0:517:0:0:0
RTL Television:578000:I0B8C23D23M16T8G4Y0:T:27500:337:338:343:0:16405:0:0:0
RTL2:578000:I0B8C23D23M16T8G4Y0:T:27500:353:354:359:0:16406:0:0:0
Super RTL:578000:I0B8C23D23M16T8G4Y0:T:27500:369:370:375:0:16411:0:0:0
VOX:578000:I0B8C23D23M16T8G4Y0:T:27500:545:546:551:0:16418:0:0:0
N24:738000:I0B8C23D23M16T8G4Y0:T:27500:225:226:231:0:16398:0:0:0
ProSieben:738000:I0B8C23D23M16T8G4Y0:T:27500:305:306;312:311:0:16403:0:0:0
KABEL1:738000:I0B8C23D23M16T8G4Y0:T:27500:161:162:167:0:16394:0:0:0
SAT.1:738000:I0B8C23D23M16T8G4Y0:T:27500:385:386;392:391:0:16408:0:0:0
EinsFestival:762000:I0B8C23D23M16T8G4Y0:T:27500:701:702:0:0:5:0:0:0
Bayerisches FS:762000:I0B8C23D23M16T8G4Y0:T:27500:501:502:504:0:33:0:0:0
hr-fernsehen:762000:I0B8C23D23M16T8G4Y0:T:27500:401:402:404:0:65:0:0:0
SÜDWEST RP:762000:I0B8C23D23M16T8G4Y0:T:27500:601:602:604:0:226:0:0:0
rheinmaintv:818000:I0B8C23D23M16T8G4Y0:T:27500:2817:2818:2823:0:19200:0:0:0
TERRA NOVA:818000:I0B8C23D23M16T8G4Y0:T:27500:609:610,611:615:0:16422:0:0:0
Eurosport:818000:I0B8C23D23M16T8G4Y0:T:27500:577:578:583:0:16420:0:0:0
tvnah:818000:I0B8C23D23M16T8G4Y0:T:27500:2833:2834:0:0:19216:0:0:0Frumpus ♥ addict
[mu'.krum.pus], [frum.pus]
Offline
#5 2005-01-31 18:24:55
- Moo-Crumpus
- Member
- From: Hessen / Germany
- Registered: 2003-12-01
- Posts: 1,487
Re: digital tv (dvb-t) - knowledge collection
I use the communities 2.6 kernel, and my hardware is recognized.
[ingo@lemone ~]$ lsmod
Module Size Used by
...
cinergyT2 15748 14
dvb_core 86056 15 cinergyT2
usbcore 125560 12 ...cinergyT2....
...
This are the nodes in dev:
/dev/dvb/adapter0/demux0
/dev/dvb/adapter0/dvr0
/dev/dvb/adapter0/frontend0
/dev/dvb/adapter0/net0
Frumpus ♥ addict
[mu'.krum.pus], [frum.pus]
Offline
#6 2005-01-31 18:28:31
- Moo-Crumpus
- Member
- From: Hessen / Germany
- Registered: 2003-12-01
- Posts: 1,487
Re: digital tv (dvb-t) - knowledge collection
So, running xine dvb:///"Das Erste" should bring up my tv. But it bring me the gui and an error about missing plugin and mrl.
Running mplayer dvb:///"Das Erste" leads to
mplayer dvb:///"Das Erste"
MPlayer 1.0pre6-3.4.3 (C) 2000-2004 MPlayer Team
CPU: Advanced Micro Devices Athlon 4 /Athlon MP/XP Palomino (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with runtime CPU detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with --disable-runtime-cpudetection.Linux RTC init error in ioctl (rtc_irqp_set 1024): Keine Berechtigung
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts.
Playing dvb:///Das Erste.
Option stream url: This URL doesn't have a hostname part.
DVB CONFIGURATION IS EMPTY, exit
Failed to open dvb:///Das ErsteExiting... (End of file)
... and this is where I am now. Ideas and help, please.
Frumpus ♥ addict
[mu'.krum.pus], [frum.pus]
Offline
#7 2005-01-31 19:31:11
- phrakture
- Arch Overlord
- From: behind you
- Registered: 2003-10-29
- Posts: 7,879
- Website
Re: digital tv (dvb-t) - knowledge collection
I don't think you need the leading slash after the protocol... and also can you try the verbose option for more info?
mplayer -v dvb://"Das Erste"Offline
#8 2005-01-31 20:35:19
- Moo-Crumpus
- Member
- From: Hessen / Germany
- Registered: 2003-12-01
- Posts: 1,487
Re: digital tv (dvb-t) - knowledge collection
mplayer -v dvb://"Das Erste"
MPlayer 1.0pre6-3.4.3 (C) 2000-2004 MPlayer Team
CPU: Advanced Micro Devices Athlon 4 /Athlon MP/XP Palomino (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with runtime CPU detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with --disable-runtime-cpudetection.
CommandLine: '-v' 'dvb://Das Erste'
init_freetype
get_path('font/font.desc') -> '/home/ingo/.mplayer/font/font.desc'
font: can't open file: /home/ingo/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Linux RTC init error in ioctl (rtc_irqp_set 1024): Keine Berechtigung
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts.
Using nanosleep() timing
get_path('input.conf') -> '/home/ingo/.mplayer/input.conf'
Can't open input config file /home/ingo/.mplayer/input.conf: Datei oder Verzeichnis nicht gefunden
Can't open input config file /etc/mplayer/input.conf: Datei oder Verzeichnis nicht gefunden
Falling back on default (hardcoded) input config
get_path('Das Erste.conf') -> '/home/ingo/.mplayer/Das Erste.conf'
Playing dvb://Das Erste.
TUNER TYPE SEEMS TO BE DVB-T
get_path('channels.conf.ter') -> '/home/ingo/.mplayer/channels.conf.ter'
get_path('channels.conf') -> '/home/ingo/.mplayer/channels.conf'
CONFIG_READ FILE: /home/ingo/.mplayer/channels.conf, type: 2
TER, NUM: 0, NUM_FIELDS: 12, NAME: Das Erste, FREQ: 198500000 PIDS: 101 102 0
TER, NUM: 1, NUM_FIELDS: 12, NAME: arte, FREQ: 198500000 PIDS: 201 202 0
TER, NUM: 2, NUM_FIELDS: 12, NAME: PHOENIX, FREQ: 198500000 PIDS: 301 302 0
TER, NUM: 3, NUM_FIELDS: 12, NAME: ARD-MHP-Data, FREQ: 198500000 PIDS: 0 0 0
TER, NUM: 4, NUM_FIELDS: 12, NAME: Doku/KiKa, FREQ: 482000000 PIDS: 593 594 0
TER, NUM: 5, NUM_FIELDS: 12, NAME: Info/3sat, FREQ: 482000000 PIDS: 561 562 0
TER, NUM: 6, NUM_FIELDS: 12, NAME: ZDF, FREQ: 482000000 PIDS: 545 546 0
TER, NUM: 7, NUM_FIELDS: 12, NAME: RTL Television, FREQ: 578000000 PIDS: 337 338 0
TER, NUM: 8, NUM_FIELDS: 12, NAME: RTL2, FREQ: 578000000 PIDS: 353 354 0
TER, NUM: 9, NUM_FIELDS: 12, NAME: Super RTL, FREQ: 578000000 PIDS: 369 370 0
TER, NUM: 10, NUM_FIELDS: 12, NAME: VOX, FREQ: 578000000 PIDS: 545 546 0
TER, NUM: 11, NUM_FIELDS: 12, NAME: N24, FREQ: 738000000 PIDS: 225 226 0
TER, NUM: 12, NUM_FIELDS: 12, NAME: KABEL1, FREQ: 738000000 PIDS: 161 162 0
TER, NUM: 13, NUM_FIELDS: 12, NAME: ProSieben, FREQ: 738000000 PIDS: 305 306 0
TER, NUM: 14, NUM_FIELDS: 12, NAME: SAT.1, FREQ: 738000000 PIDS: 385 386 0
TER, NUM: 15, NUM_FIELDS: 12, NAME: EinsFestival, FREQ: 762000000 PIDS: 701 702 0
TER, NUM: 16, NUM_FIELDS: 12, NAME: ARD-MHP-Data, FREQ: 762000000 PIDS: 0 0 0
TER, NUM: 17, NUM_FIELDS: 12, NAME: Bayerisches FS, FREQ: 762000000 PIDS: 501 502 0
TER, NUM: 18, NUM_FIELDS: 12, NAME: hr-fernsehen, FREQ: 762000000 PIDS: 401 402 0
TER, NUM: 19, NUM_FIELDS: 12, NAME: SÃœDWEST RP, FREQ: 762000000 PIDS: 601 602 0
TER, NUM: 20, NUM_FIELDS: 12, NAME: rheinmaintv, FREQ: 818000000 PIDS: 2817 2818 0
TER, NUM: 21, NUM_FIELDS: 12, NAME: TERRA NOVA, FREQ: 818000000 PIDS: 609 610 0
TER, NUM: 22, NUM_FIELDS: 12, NAME: Eurosport, FREQ: 818000000 PIDS: 577 578 0
TER, NUM: 23, NUM_FIELDS: 12, NAME: tvnah, FREQ: 818000000 PIDS: 2833 2834 0
DVB_CONFIG, can't open device /dev/dvb/adapter1/frontend0, skipping
DVB_CONFIG, can't open device /dev/dvb/adapter2/frontend0, skipping
DVB_CONFIG, can't open device /dev/dvb/adapter3/frontend0, skipping
OPEN_DVB: prog=Das Erste, card=1, type=2, vid=0, aid=0
code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
Released under the GPL.
Latest version available from http://www.linuxstb.org/
PROG: Das Erste, CARD: 1, VID: 0, AID: 0, TYPE: , FILE: (null)
PROGRAM NUMBER 0: name=Das Erste, freq=198500000
DVB_OPEN_DEVICES(3)
OPEN(0), file /dev/dvb/adapter0/demux0: FD=4, CNT=0
OPEN(1), file /dev/dvb/adapter0/demux0: FD=5, CNT=1
OPEN(2), file /dev/dvb/adapter0/demux0: FD=6, CNT=2
DVB_SET_CHANNEL: new channel name=Das Erste, card: 0, channel 0
DIFFERENT TUNING THAN THE PREVIOUS: -> 0|198500000|2|1|3|1|1|3
dvb_tune Freq: 198500000
TUNE_IT, fd_frontend 3, fd_sec 0
freq 198500000, srate 3079847756, pol Using DVB card "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver"
tuning DVB-T (in United Kingdom) to 198500000 Hz, bandwidth: 1
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL
polling....
Getting frontend event
FE_GET_EVENTdvb_tune, TUNING FAILED
ERROR, COULDN'T SET CHANNEL 0: DVBIN_CLOSE, close(2), fd=6, COUNT=2
DVBIN_CLOSE, close(1), fd=5, COUNT=1
DVBIN_CLOSE, close(0), fd=4, COUNT=0
Failed to open dvb://Das Erste
vo: x11 uninit called but X11 not inited..
Exiting... (End of file)Thanks for that hint. I guess the point is:
....
FE_GET_EVENTdvb_tune, TUNING FAILED
ERROR, COULDN'T SET CHANNEL 0: DVBIN_CLOSE, close(2), fd=6, COUNT=2
...As said above, the antenna is really poor. I believe the device is set up and could work, but there is just no input.
Frumpus ♥ addict
[mu'.krum.pus], [frum.pus]
Offline
#9 2005-01-31 20:38:37
- phrakture
- Arch Overlord
- From: behind you
- Registered: 2003-10-29
- Posts: 7,879
- Website
Re: digital tv (dvb-t) - knowledge collection
FE_GET_EVENTdvb_tune, TUNING FAILED
ERROR, COULDN'T SET CHANNEL 0: DVBIN_CLOSE, close(2), fd=6, COUNT=2
DVBIN_CLOSE, close(1), fd=5, COUNT=1
DVBIN_CLOSE, close(0), fd=4, COUNT=0 I'd venture a guess that you aren't able to write to the device... looks to me like it's trying to change something on the device to switch to the proper channel....
did you try as root?
Offline
#10 2005-02-03 18:59:20
- Moo-Crumpus
- Member
- From: Hessen / Germany
- Registered: 2003-12-01
- Posts: 1,487
Re: digital tv (dvb-t) - knowledge collection
I reset permissions to root:video 770 and am part of video.
mplayer -v dvb://"Das Erste"
MPlayer 1.0pre6-3.4.3 (C) 2000-2004 MPlayer Team
CPU: Advanced Micro Devices Athlon 4 /Athlon MP/XP Palomino (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with runtime CPU detection - WARNING - this is not optimal!
To get best performance, recompile MPlayer with --disable-runtime-cpudetection.
CommandLine: '-v' 'dvb://Das Erste'
init_freetype
get_path('font/font.desc') -> '/home/ingo/.mplayer/font/font.desc'
font: can't open file: /home/ingo/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Linux RTC init error in ioctl (rtc_irqp_set 1024): Keine Berechtigung
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system startup scripts.
Using nanosleep() timing
get_path('input.conf') -> '/home/ingo/.mplayer/input.conf'
Can't open input config file /home/ingo/.mplayer/input.conf: Datei oder Verzeichnis nicht gefunden
Can't open input config file /etc/mplayer/input.conf: Datei oder Verzeichnis nicht gefunden
Falling back on default (hardcoded) input config
get_path('Das Erste.conf') -> '/home/ingo/.mplayer/Das Erste.conf'
Playing dvb://Das Erste.
TUNER TYPE SEEMS TO BE DVB-T
get_path('channels.conf.ter') -> '/home/ingo/.mplayer/channels.conf.ter'
get_path('channels.conf') -> '/home/ingo/.mplayer/channels.conf'
CONFIG_READ FILE: /home/ingo/.mplayer/channels.conf, type: 2
TER, NUM: 0, NUM_FIELDS: 12, NAME: Das Erste, FREQ: 198500000 PIDS: 101 102 0
TER, NUM: 1, NUM_FIELDS: 12, NAME: arte, FREQ: 198500000 PIDS: 201 202 0
TER, NUM: 2, NUM_FIELDS: 12, NAME: PHOENIX, FREQ: 198500000 PIDS: 301 302 0
TER, NUM: 3, NUM_FIELDS: 12, NAME: ARD-MHP-Data, FREQ: 198500000 PIDS: 0 0 0
TER, NUM: 4, NUM_FIELDS: 12, NAME: Doku/KiKa, FREQ: 482000000 PIDS: 593 594 0
TER, NUM: 5, NUM_FIELDS: 12, NAME: Info/3sat, FREQ: 482000000 PIDS: 561 562 0
TER, NUM: 6, NUM_FIELDS: 12, NAME: ZDF, FREQ: 482000000 PIDS: 545 546 0
TER, NUM: 7, NUM_FIELDS: 12, NAME: RTL Television, FREQ: 578000000 PIDS: 337 338 0
TER, NUM: 8, NUM_FIELDS: 12, NAME: RTL2, FREQ: 578000000 PIDS: 353 354 0
TER, NUM: 9, NUM_FIELDS: 12, NAME: Super RTL, FREQ: 578000000 PIDS: 369 370 0
TER, NUM: 10, NUM_FIELDS: 12, NAME: VOX, FREQ: 578000000 PIDS: 545 546 0
TER, NUM: 11, NUM_FIELDS: 12, NAME: N24, FREQ: 738000000 PIDS: 225 226 0
TER, NUM: 12, NUM_FIELDS: 12, NAME: KABEL1, FREQ: 738000000 PIDS: 161 162 0
TER, NUM: 13, NUM_FIELDS: 12, NAME: ProSieben, FREQ: 738000000 PIDS: 305 306 0
TER, NUM: 14, NUM_FIELDS: 12, NAME: SAT.1, FREQ: 738000000 PIDS: 385 386 0
TER, NUM: 15, NUM_FIELDS: 12, NAME: EinsFestival, FREQ: 762000000 PIDS: 701 702 0
TER, NUM: 16, NUM_FIELDS: 12, NAME: ARD-MHP-Data, FREQ: 762000000 PIDS: 0 0 0
TER, NUM: 17, NUM_FIELDS: 12, NAME: Bayerisches FS, FREQ: 762000000 PIDS: 501 502 0
TER, NUM: 18, NUM_FIELDS: 12, NAME: hr-fernsehen, FREQ: 762000000 PIDS: 401 402 0
TER, NUM: 19, NUM_FIELDS: 12, NAME: SÃœDWEST RP, FREQ: 762000000 PIDS: 601 602 0
TER, NUM: 20, NUM_FIELDS: 12, NAME: rheinmaintv, FREQ: 818000000 PIDS: 2817 2818 0
TER, NUM: 21, NUM_FIELDS: 12, NAME: TERRA NOVA, FREQ: 818000000 PIDS: 609 610 0
TER, NUM: 22, NUM_FIELDS: 12, NAME: Eurosport, FREQ: 818000000 PIDS: 577 578 0
TER, NUM: 23, NUM_FIELDS: 12, NAME: tvnah, FREQ: 818000000 PIDS: 2833 2834 0
DVB_CONFIG, can't open device /dev/dvb/adapter1/frontend0, skipping
DVB_CONFIG, can't open device /dev/dvb/adapter2/frontend0, skipping
DVB_CONFIG, can't open device /dev/dvb/adapter3/frontend0, skipping
OPEN_DVB: prog=Das Erste, card=1, type=2, vid=0, aid=0
code taken from dvbstream for mplayer v0.4pre1 - (C) Dave Chapman 2001
Released under the GPL.
Latest version available from http://www.linuxstb.org/
PROG: Das Erste, CARD: 1, VID: 0, AID: 0, TYPE: , FILE: (null)
PROGRAM NUMBER 0: name=Das Erste, freq=198500000
DVB_OPEN_DEVICES(3)
OPEN(0), file /dev/dvb/adapter0/demux0: FD=4, CNT=0
OPEN(1), file /dev/dvb/adapter0/demux0: FD=5, CNT=1
OPEN(2), file /dev/dvb/adapter0/demux0: FD=6, CNT=2
DVB_SET_CHANNEL: new channel name=Das Erste, card: 0, channel 0
DIFFERENT TUNING THAN THE PREVIOUS: -> 0|198500000|2|1|3|1|1|3
dvb_tune Freq: 198500000
TUNE_IT, fd_frontend 3, fd_sec 0
freq 198500000, srate 3079839564, pol Using DVB card "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver"
tuning DVB-T (in United Kingdom) to 198500000 Hz, bandwidth: 1
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL
polling....
Getting frontend event
FE_GET_EVENTdvb_tune, TUNING FAILED
ERROR, COULDN'T SET CHANNEL 0: DVBIN_CLOSE, close(2), fd=6, COUNT=2
DVBIN_CLOSE, close(1), fd=5, COUNT=1
DVBIN_CLOSE, close(0), fd=4, COUNT=0
Failed to open dvb://Das Erste
vo: x11 uninit called but X11 not inited..
Exiting... (End of file)It is the same, isn't it. Due to "UNER TYPE SEEMS TO BE DVB-T
get_path('channels.conf.ter') -> '/home/ingo/.mplayer/channels.conf.ter'" I moved channels.conf to channels.conf.ter. I guess I should prrof first, if the channel conf files are correct. Might be they are wrong.
Frumpus ♥ addict
[mu'.krum.pus], [frum.pus]
Offline
#11 2005-02-03 20:42:27
- phrakture
- Arch Overlord
- From: behind you
- Registered: 2003-10-29
- Posts: 7,879
- Website
Re: digital tv (dvb-t) - knowledge collection
it actually looks like it may be tuning correctly... or at least setting the freq correctly, just not getting a signal...
Offline
#12 2005-02-04 17:37:32
- Moo-Crumpus
- Member
- From: Hessen / Germany
- Registered: 2003-12-01
- Posts: 1,487
Re: digital tv (dvb-t) - knowledge collection
Thank you for your assistance. I hope somebody will find this thread helpful for his own setup. I consider the antenna to be not very usefull, so I will finish the setup if I own a better one.
Frumpus ♥ addict
[mu'.krum.pus], [frum.pus]
Offline
#13 2005-10-22 14:22:28
- thorstenhirsch
- Member
- Registered: 2005-08-03
- Posts: 102
Re: digital tv (dvb-t) - knowledge collection
Thanks for this thread, especially for the channel list config.
How did you create it? Is there some linux application? And how can I change channels in mplayer? I don't want to quit and restart with a different URL when I want to zap through the channels.
Can someone recommend a TV application for DVB?
Offline
#14 2005-10-22 15:04:49
- Moo-Crumpus
- Member
- From: Hessen / Germany
- Registered: 2003-12-01
- Posts: 1,487
Re: digital tv (dvb-t) - knowledge collection
I found out kaffeine is the thing to choose today. It scans for channels, and you have a nice tv app by the way. It is a kde thing.
Frumpus ♥ addict
[mu'.krum.pus], [frum.pus]
Offline
#15 2005-10-23 15:43:43
- thorstenhirsch
- Member
- Registered: 2005-08-03
- Posts: 102
Re: digital tv (dvb-t) - knowledge collection
Thank you, kaffeine really looks good.
Offline