You are not logged in.
I have installed archlinux for first time, and now it is up and running. I downloaded xorg and all that is needed, testet it with xclock and it works.
I want to have mate desktop, so I downloaded accordingly to mate-userguide.
Now I am in the section where i should start mate.
In the guide it says: Always make sure dbus is in your DAEMONS array in rc.conf before starting MATE.
The problem is that /etc/rc.conf is empty and I have no idea what to fill it with?
startx will not start Mate without it, and i cannot find any answer on the web.
Help me if you can?
Offline
Which "guide" have you followed. Arch now uses systemd as the default init system.
All men have stood for freedom...
For freedom is the man that will turn the world upside down.
Gerrard Winstanley.
Offline
This guide
Offline
Which guide did you use to install Arch I meant.
All men have stood for freedom...
For freedom is the man that will turn the world upside down.
Gerrard Winstanley.
Offline
Offline
It doesn't mention rc.conf at all. dbus should be running. Are you sure it isn't? What are the actual errors you are getting now?
All men have stood for freedom...
For freedom is the man that will turn the world upside down.
Gerrard Winstanley.
Offline
I get noe errors, but no desktop environment. I run
# startx
after that my screen gets black, and after two seconds it displays the terminal again. there are some text displaying what the program initialised.
and on the last line:
waiting for X server to shut down Server terminated successfully (0). Closing log file.ection to X server lost
Thats why i think some of my config files are wrong, xclock worked when i installed it, so startx is working but it cannot find MATE.
Offline
what's in your ~/.xinitrc?
We'll need more from that log, especially any lines that show (EE). You can find it at /var/log/Xorg.0.log
Last edited by Scimmia (2012-11-30 17:08:03)
Offline
#!/bin/sh
#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
exec mate-session
Offline
For some reason </etc/init.d> does not exist eather.
Offline
Why would it?
That wiki page is outdated. rc.conf is no longer used. I guess you've either forgotten to install your X video driver, or you're getting some other error.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
How can my video driver be forgotten xorg works when i run xclock.
Offline
Good point. Ignore that part of my post.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
Just downloaded gnome, and replaced MATE with gnome-session in .xinitrc. This works, but is really not what i wanted. Stil it points out that startx does not find MATE for some reason.
Offline
Dbus can be installed. You can still need it for things like wicd.
Right now, dbus can't be started by systemd (at least of this writing). So you do have to create an /etc/rc.conf
In /etc/rc.conf type:
DAEMONS= (dbus)
save and reboot.
Offline
woomia, you're completely wrong. systemd starts dbus automatically when it's needed, you don't need to put it in rc.conf.
mattasp, we need that Xorg.0.log. Post the whole thing in code tags.
Offline
woomia, you're completely wrong. systemd starts dbus automatically when it's needed, you don't need to put it in rc.conf.
mattasp, we need that Xorg.0.log. Post the whole thing in code tags.
Really? Tell that to wicd.
Offline
So wicd is a broken piece of crap supported by advocates who have no idea what they're talking about or what they're doing. Got it!
I think it might be better to figure out why wicd and seemingly MATE (although I'd have expected a bug thread to pop up sooner if it really was broken ...) are magically the only pieces of dbus software that fails with systemd than to rely on a broken kludge that won't exist much longer and frankly never should have existed in the first place.
Last edited by ZekeSulastin (2012-11-30 19:55:21)
Offline
Tell that to wicd.
wicd works seamlessly with systemd's way of starting services, incl. dbus. No extra tricks nor employing rc scripts needed.
:: Registered Linux User No. 223384
:: github
:: infinality-bundle+fonts: good looking fonts made easy
Offline
Like I said, tell that to wicd which prints out the warning during install that it needs dbus in DAEMONS. Perhaps this is something that needs to be fixed by the wicd maintainer?
Offline
Like I said, tell that to wicd which prints out the warning during install that it needs dbus in DAEMONS.
Sorry, I couldn't figure out what you meant. There's really a bit like this
==> You need to restart the dbus service after
==> upgrading wicd.
==> Disable networkmanager,dhcdbd or other networking
==> utility and add 'wicd' to DAEMONS
==> in /etc/rc.conf
==> 'dbus' HAS to be before 'wicd' in rc.conf in the
==> DAEMONS array.in my pacman's log. Seems like the maintainer must have overlooked this part of the wicd.install script. Nevertheless, wicd doesn't require dbus to be started via rc.conf; it's enough to enable the service file -- i.e. wicd's one -- and the rest is done automatically, as expected.
:: Registered Linux User No. 223384
:: github
:: infinality-bundle+fonts: good looking fonts made easy
Offline
systemd depends on dbus, so dbus is enabled automatically when using systemd. You don't need to put in rc.conf.
Why don't you want to use a Display Manager? I have MATE with LXDM, works well. If you want to use LXDM, do this:
# pacman -S lxdm
# systemctl enable lxdm.service
Reboot the system and select MATE from the Sessions list, that's all.
Last edited by hyuga (2012-12-01 06:52:11)
Offline