You are not logged in.

#1 2012-12-01 16:20:30

Xaero252
Member
Registered: 2011-11-28
Posts: 107

Unable to wake screen after X dims it

Okay, so I'm on a desktop, and I've attempted numerous times to completely disable screen dimming as I have a light switch that kills my monitor, and desktop audio equipment - leaving my tower on.
For a while, I thought I had the problem completely solved, but it seems I was wrong; now, after an unknown period of time (15m?), the screen blanks using software (I.e. doesn't tell the monitor to power down) but it only covers ~85% of the screen (on the right and bottom I can see ~100px of my desktop) And if I leave it even longer (hour?) it tells the screen to power down. At this point, I have to reboot the computer by pressing the power button. This is unacceptable for obvious reasons.

This is how I attempted to disable the display dimming:
~/.xinitrc:

...
...
...
...
xset s off&
xset s noblank&
xset -dpms&
...
...
...
...

Also important to note that I do not use, or even have installed the xscreensaver package.

I realize the multiple xset commands are redundant, especially given that I turn it off explicitly, and then change settings (which probably turns it back on) however I tried the settings independantly to no avail.
I've google'd around on the issue, and I've read through the ArchWiki DPMS entry but I'm not seeing an obvious solution, unless the ordering of the xset commands is very particular.

Last edited by Xaero252 (2012-12-01 16:20:50)

Offline

Board footer

Powered by FluxBB