You are not logged in.

#1 2012-11-16 00:46:59

urza9814
Member
Registered: 2010-06-05
Posts: 28

[Solved] Systemd broke KDE

OK, well, looks like my problems weren't actually gone. So i recently upgraded and switched to systemd and all that. I did go through the wiki for systemd and KDE and run the commands to start kdm on boot, and after a few other minor issues I managed to get it to start up once last night, but now it won't. It's definitely attempting to launch kdm, but it immediately drops back to the command-line login. X does work -- I can run 'X -retro' just fine.

I'll put some logs here, but I don't see anything obviously wrong in any of these. If you have any other thoughts on troubleshooting this let me know.

Here's my kdm.log:

X.Org X Server 1.13.0
Release Date: 2012-09-05
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.6.3-1-ARCH x86_64 
Current Operating System: Linux myhost 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64
Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda5:root ro acpi_backlight=vendor pcie_aspm=force ipv6.disable=1 ipv6.disable_ipv6=1 init=/usr/lib/systemd/systemd
Build Date: 08 November 2012  07:09:29PM
 
Current version of pixman: 0.28.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 15 13:58:31 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
(WW) module ABI major version (12) doesn't match the server's version (13)
Server terminated successfully (0). Closing log file.

And here's my X.org.0.log:

X.Org X Server 1.13.0
Release Date: 2012-09-05
[   155.933] X Protocol Version 11, Revision 0
[   155.934] Build Operating System: Linux 3.6.3-1-ARCH x86_64 
[   155.935] Current Operating System: Linux myhost 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64
[   155.935] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda5:root ro acpi_backlight=vendor pcie_aspm=force ipv6.disable=1 ipv6.disable_ipv6=1 init=/usr/lib/systemd/systemd
[   155.937] Build Date: 08 November 2012  07:09:29PM
[   155.938]  
[   155.938] Current version of pixman: 0.28.0
[   155.939] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   155.939] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   155.942] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 15 13:59:28 2012
[   155.943] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   155.943] (==) No Layout section.  Using the first Screen section.
[   155.943] (==) No screen section available. Using defaults.
[   155.943] (**) |-->Screen "Default Screen Section" (0)
[   155.943] (**) |   |-->Monitor "<default monitor>"
[   155.943] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   155.943] (**) Option "IgnoreABI" "True"
[   155.943] (**) Ignoring ABI Version
[   155.943] (==) Automatically adding devices
[   155.943] (==) Automatically enabling devices
[   155.943] (==) Automatically adding GPU devices
[   155.943] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   155.943] 	Entry deleted from font path.
[   155.943] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   155.943] (==) ModulePath set to "/usr/lib/xorg/modules"
[   155.943] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   155.943] (II) Loader magic: 0x7fcc40
[   155.943] (II) Module ABI versions:
[   155.943] 	X.Org ANSI C Emulation: 0.4
[   155.943] 	X.Org Video Driver: 13.1
[   155.943] 	X.Org XInput driver : 18.0
[   155.943] 	X.Org Server Extension : 7.0
[   155.943] (II) config/udev: Adding drm device (/dev/dri/card0)
[   155.943] (II) config/udev: Adding drm device (/dev/dri/card1)
[   155.945] (--) PCI:*(0:0:2:0) 8086:0116:103c:3388 rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00006000/64
[   155.945] (--) PCI: (0:1:0:0) 1002:6740:103c:3388 rev 0, Mem @ 0xa0000000/268435456, 0xc6500000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[   155.945] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   155.946] Initializing built-in extension Generic Event Extension
[   155.946] Initializing built-in extension SHAPE
[   155.947] Initializing built-in extension MIT-SHM
[   155.947] Initializing built-in extension XInputExtension
[   155.948] Initializing built-in extension XTEST
[   155.949] Initializing built-in extension BIG-REQUESTS
[   155.949] Initializing built-in extension SYNC
[   155.950] Initializing built-in extension XKEYBOARD
[   155.950] Initializing built-in extension XC-MISC
[   155.951] Initializing built-in extension SECURITY
[   155.951] Initializing built-in extension XINERAMA
[   155.952] Initializing built-in extension XFIXES
[   155.953] Initializing built-in extension RENDER
[   155.953] Initializing built-in extension RANDR
[   155.954] Initializing built-in extension COMPOSITE
[   155.954] Initializing built-in extension DAMAGE
[   155.955] Initializing built-in extension MIT-SCREEN-SAVER
[   155.955] Initializing built-in extension DOUBLE-BUFFER
[   155.956] Initializing built-in extension RECORD
[   155.956] Initializing built-in extension DPMS
[   155.957] Initializing built-in extension X-Resource
[   155.957] Initializing built-in extension XVideo
[   155.958] Initializing built-in extension XVideo-MotionCompensation
[   155.958] Initializing built-in extension XFree86-VidModeExtension
[   155.959] Initializing built-in extension XFree86-DGA
[   155.959] Initializing built-in extension XFree86-DRI
[   155.960] Initializing built-in extension DRI2
[   155.960] (II) LoadModule: "glx"
[   155.960] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   155.960] (II) Module glx: vendor="X.Org Foundation"
[   155.960] 	compiled for 1.13.0, module version = 1.0.0
[   155.960] 	ABI class: X.Org Server Extension, version 7.0
[   155.960] (==) AIGLX enabled
[   155.960] Loading extension GLX
[   155.960] (==) Matched intel as autoconfigured driver 0
[   155.960] (==) Matched ati as autoconfigured driver 1
[   155.960] (==) Matched intel as autoconfigured driver 2
[   155.960] (==) Matched vesa as autoconfigured driver 3
[   155.960] (==) Matched modesetting as autoconfigured driver 4
[   155.960] (==) Matched fbdev as autoconfigured driver 5
[   155.960] (==) Assigned the driver to the xf86ConfigLayout
[   155.960] (II) LoadModule: "intel"
[   155.960] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   155.960] (II) Module intel: vendor="X.Org Foundation"
[   155.960] 	compiled for 1.13.0, module version = 2.20.12
[   155.960] 	Module class: X.Org Video Driver
[   155.961] 	ABI class: X.Org Video Driver, version 13.0
[   155.961] (II) LoadModule: "ati"
[   155.961] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[   155.961] (II) Module ati: vendor="X.Org Foundation"
[   155.961] 	compiled for 1.12.2, module version = 6.14.6
[   155.961] 	Module class: X.Org Video Driver
[   155.961] 	ABI class: X.Org Video Driver, version 12.0
[   155.961] (WW) module ABI major version (12) doesn't match the server's version (13)
[   155.961] (II) LoadModule: "vesa"
[   155.961] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   155.961] (II) Module vesa: vendor="X.Org Foundation"
[   155.961] 	compiled for 1.13.0, module version = 2.3.2
[   155.961] 	Module class: X.Org Video Driver
[   155.961] 	ABI class: X.Org Video Driver, version 13.0
[   155.961] (II) LoadModule: "modesetting"
[   155.962] (WW) Warning, couldn't open module modesetting
[   155.962] (II) UnloadModule: "modesetting"
[   155.962] (II) Unloading modesetting
[   155.962] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   155.962] (II) LoadModule: "fbdev"
[   155.962] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   155.962] (II) Module fbdev: vendor="X.Org Foundation"
[   155.962] 	compiled for 1.13.0, module version = 0.4.3
[   155.962] 	Module class: X.Org Video Driver
[   155.962] 	ABI class: X.Org Video Driver, version 13.0
[   155.962] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[   155.962] (II) VESA: driver for VESA chipsets: vesa
[   155.962] (II) FBDEV: driver for framebuffer: fbdev
[   155.962] (--) using VT number 2

[   155.964] (II) intel(0): using device path '/dev/dri/card1'
[   155.964] (WW) Falling back to old probe method for vesa
[   155.964] (WW) Falling back to old probe method for fbdev
[   155.964] (II) Loading sub module "fbdevhw"
[   155.964] (II) LoadModule: "fbdevhw"
[   155.965] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   155.965] (II) Module fbdevhw: vendor="X.Org Foundation"
[   155.965] 	compiled for 1.13.0, module version = 0.0.2
[   155.965] 	ABI class: X.Org Video Driver, version 13.1
[   155.965] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   155.965] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   155.965] (==) intel(0): RGB weight 888
[   155.965] (==) intel(0): Default visual is TrueColor
[   155.965] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[   155.965] (**) intel(0): Relaxed fencing enabled
[   155.965] (**) intel(0): Wait on SwapBuffers? enabled
[   155.965] (**) intel(0): Triple buffering? enabled
[   155.965] (**) intel(0): Framebuffer tiled
[   155.965] (**) intel(0): Pixmaps tiled
[   155.965] (**) intel(0): 3D buffers tiled
[   155.965] (**) intel(0): SwapBuffers wait enabled
[   155.965] (==) intel(0): video overlay key set to 0x101fe
[   155.965] (II) intel(0): Output LVDS1 has no monitor section
[   155.965] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[   155.977] (II) intel(0): Output VGA1 has no monitor section
[   155.977] (II) intel(0): Output HDMI1 has no monitor section
[   156.020] (II) intel(0): Output DP1 has no monitor section
[   156.020] (II) intel(0): EDID for output LVDS1
[   156.020] (II) intel(0): Manufacturer: AUO  Model: 22ec  Serial#: 0
[   156.020] (II) intel(0): Year: 2009  Week: 1
[   156.020] (II) intel(0): EDID Version: 1.3
[   156.020] (II) intel(0): Digital Display Input
[   156.020] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   156.020] (II) intel(0): Gamma: 2.20
[   156.020] (II) intel(0): No DPMS capabilities specified
[   156.020] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   156.020] (II) intel(0): First detailed timing is preferred mode
[   156.020] (II) intel(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[   156.020] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[   156.020] (II) intel(0): Manufacturer's mask: 0
[   156.020] (II) intel(0): Supported detailed timing:
[   156.020] (II) intel(0): clock: 69.3 MHz   Image Size:  344 x 193 mm
[   156.020] (II) intel(0): h_active: 1366  h_sync: 1398  h_sync_end 1422 h_blank_end 1432 h_border: 0
[   156.020] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
[   156.020] (II) intel(0): Unknown vendor-specific block f
[   156.020] (II) intel(0):  AUO
[   156.020] (II) intel(0):  B156XW02 V2
[   156.020] (II) intel(0): EDID (in hex):
[   156.020] (II) intel(0): 	00ffffffffffff0006afec2200000000
[   156.020] (II) intel(0): 	01130103802213780ac8959e57549226
[   156.020] (II) intel(0): 	0f505400000001010101010101010101
[   156.020] (II) intel(0): 	010101010101121b5642500026302018
[   156.020] (II) intel(0): 	340058c1100000180000000f00000000
[   156.020] (II) intel(0): 	00000000000000000020000000fe0041
[   156.020] (II) intel(0): 	554f0a202020202020202020000000fe
[   156.020] (II) intel(0): 	004231353658573032205632200a00c0
[   156.020] (II) intel(0): EDID vendor "AUO", prod id 8940
[   156.020] (II) intel(0): Printing DDC gathered Modelines:
[   156.020] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1422 1432  768 771 775 806 -hsync -vsync (48.4 kHz eP)
[   156.020] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   156.020] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   156.020] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   156.020] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   156.020] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   156.020] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   156.020] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   156.020] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   156.020] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   156.020] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   156.020] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   156.020] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   156.020] (II) intel(0): Printing probed modes for output LVDS1
[   156.020] (II) intel(0): Modeline "1366x768"x60.0   69.30  1366 1398 1422 1432  768 771 775 806 -hsync -vsync (48.4 kHz eP)
[   156.020] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   156.020] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   156.020] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   156.020] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   156.033] (II) intel(0): EDID for output VGA1
[   156.034] (II) intel(0): EDID for output HDMI1
[   156.076] (II) intel(0): EDID for output DP1
[   156.076] (II) intel(0): Output LVDS1 connected
[   156.076] (II) intel(0): Output VGA1 disconnected
[   156.076] (II) intel(0): Output HDMI1 disconnected
[   156.076] (II) intel(0): Output DP1 disconnected
[   156.076] (II) intel(0): Using exact sizes for initial modes
[   156.076] (II) intel(0): Output LVDS1 using initial mode 1366x768
[   156.076] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   156.076] (II) intel(0): Kernel page flipping support detected, enabling
[   156.076] (**) intel(0): Display dimensions: (340, 190) mm
[   156.076] (**) intel(0): DPI set to (102, 102)
[   156.076] (II) Loading sub module "fb"
[   156.076] (II) LoadModule: "fb"
[   156.076] (II) Loading /usr/lib/xorg/modules/libfb.so
[   156.077] (II) Module fb: vendor="X.Org Foundation"
[   156.077] 	compiled for 1.13.0, module version = 1.0.0
[   156.077] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   156.077] (II) Loading sub module "dri2"
[   156.077] (II) LoadModule: "dri2"
[   156.077] (II) Module "dri2" already built-in
[   156.077] (II) UnloadModule: "vesa"
[   156.077] (II) Unloading vesa
[   156.077] (II) UnloadModule: "fbdev"
[   156.077] (II) Unloading fbdev
[   156.077] (II) UnloadSubModule: "fbdevhw"
[   156.077] (II) Unloading fbdevhw
[   156.077] (==) Depth 24 pixmap format is 32 bpp
[   156.077] (II) intel(0): [DRI2] Setup complete
[   156.077] (II) intel(0): [DRI2]   DRI driver: i965
[   156.077] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[   156.078] (II) UXA(0): Driver registered support for the following operations:
[   156.078] (II)         solid
[   156.078] (II)         copy
[   156.078] (II)         composite (RENDER acceleration)
[   156.078] (II)         put_image
[   156.078] (II)         get_image
[   156.078] (==) intel(0): Backing store disabled
[   156.078] (==) intel(0): Silken mouse enabled
[   156.078] (II) intel(0): Initializing HW Cursor
[   156.078] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   156.078] (==) intel(0): DPMS enabled
[   156.078] (==) intel(0): Intel XvMC decoder enabled
[   156.078] (II) intel(0): Set up textured video
[   156.078] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   156.078] (II) intel(0): direct rendering: DRI2 Enabled
[   156.078] (==) intel(0): hotplug detection: "enabled"
[   156.096] (--) RandR disabled
[   156.104] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   156.104] (II) AIGLX: enabled GLX_INTEL_swap_event
[   156.104] (II) AIGLX: enabled GLX_ARB_create_context
[   156.104] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   156.104] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   156.104] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   156.104] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   156.104] (II) AIGLX: Loaded and initialized i965
[   156.104] (II) GLX: Initialized DRI2 GL provider for screen 0
[   156.104] (II) intel(0): Setting screen physical size to 361 x 203
[   156.171] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   156.171] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   156.171] (II) LoadModule: "evdev"
[   156.172] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   156.172] (II) Module evdev: vendor="X.Org Foundation"
[   156.172] 	compiled for 1.13.0, module version = 2.7.3
[   156.172] 	Module class: X.Org XInput Driver
[   156.172] 	ABI class: X.Org XInput driver, version 18.0
[   156.172] (II) Using input driver 'evdev' for 'Power Button'
[   156.172] (**) Power Button: always reports core events
[   156.172] (**) evdev: Power Button: Device: "/dev/input/event3"
[   156.172] (--) evdev: Power Button: Vendor 0 Product 0x1
[   156.172] (--) evdev: Power Button: Found keys
[   156.172] (II) evdev: Power Button: Configuring as keyboard
[   156.172] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   156.172] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   156.172] (**) Option "xkb_rules" "evdev"
[   156.172] (**) Option "xkb_model" "evdev"
[   156.172] (**) Option "xkb_layout" "dvorak"
[   156.190] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[   156.190] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   156.190] (II) Using input driver 'evdev' for 'Video Bus'
[   156.190] (**) Video Bus: always reports core events
[   156.190] (**) evdev: Video Bus: Device: "/dev/input/event14"
[   156.190] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   156.190] (--) evdev: Video Bus: Found keys
[   156.190] (II) evdev: Video Bus: Configuring as keyboard
[   156.190] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input14/event14"
[   156.190] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   156.190] (**) Option "xkb_rules" "evdev"
[   156.190] (**) Option "xkb_model" "evdev"
[   156.190] (**) Option "xkb_layout" "dvorak"
[   156.190] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   156.190] (II) No input driver specified, ignoring this device.
[   156.190] (II) This device may have been added with another device file.
[   156.191] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[   156.191] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   156.191] (II) Using input driver 'evdev' for 'Video Bus'
[   156.191] (**) Video Bus: always reports core events
[   156.191] (**) evdev: Video Bus: Device: "/dev/input/event13"
[   156.191] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   156.191] (--) evdev: Video Bus: Found keys
[   156.191] (II) evdev: Video Bus: Configuring as keyboard
[   156.191] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input13/event13"
[   156.191] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[   156.191] (**) Option "xkb_rules" "evdev"
[   156.191] (**) Option "xkb_model" "evdev"
[   156.191] (**) Option "xkb_layout" "dvorak"
[   156.191] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   156.191] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   156.191] (II) Using input driver 'evdev' for 'Power Button'
[   156.191] (**) Power Button: always reports core events
[   156.191] (**) evdev: Power Button: Device: "/dev/input/event2"
[   156.191] (--) evdev: Power Button: Vendor 0 Product 0x1
[   156.191] (--) evdev: Power Button: Found keys
[   156.191] (II) evdev: Power Button: Configuring as keyboard
[   156.191] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[   156.191] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[   156.191] (**) Option "xkb_rules" "evdev"
[   156.191] (**) Option "xkb_model" "evdev"
[   156.191] (**) Option "xkb_layout" "dvorak"
[   156.191] (II) config/udev: Adding drm device (/dev/dri/card0)
[   156.192] (II) config/udev: Adding drm device (/dev/dri/card1)
[   156.192] (II) config/udev: Adding input device HP TrueVision HD (/dev/input/event8)
[   156.192] (**) HP TrueVision HD: Applying InputClass "evdev keyboard catchall"
[   156.192] (II) Using input driver 'evdev' for 'HP TrueVision HD'
[   156.192] (**) HP TrueVision HD: always reports core events
[   156.192] (**) evdev: HP TrueVision HD: Device: "/dev/input/event8"
[   156.192] (--) evdev: HP TrueVision HD: Vendor 0x64e Product 0xd281
[   156.192] (--) evdev: HP TrueVision HD: Found keys
[   156.192] (II) evdev: HP TrueVision HD: Configuring as keyboard
[   156.192] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input8/event8"
[   156.192] (II) XINPUT: Adding extended input device "HP TrueVision HD" (type: KEYBOARD, id 10)
[   156.192] (**) Option "xkb_rules" "evdev"
[   156.192] (**) Option "xkb_model" "evdev"
[   156.192] (**) Option "xkb_layout" "dvorak"
[   156.192] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[   156.192] (II) No input driver specified, ignoring this device.
[   156.192] (II) This device may have been added with another device file.
[   156.193] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[   156.193] (II) No input driver specified, ignoring this device.
[   156.193] (II) This device may have been added with another device file.
[   156.193] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[   156.193] (II) No input driver specified, ignoring this device.
[   156.193] (II) This device may have been added with another device file.
[   156.193] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event12)
[   156.193] (II) No input driver specified, ignoring this device.
[   156.193] (II) This device may have been added with another device file.
[   156.193] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   156.193] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   156.193] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   156.193] (**) AT Translated Set 2 keyboard: always reports core events
[   156.193] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   156.193] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   156.193] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   156.193] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   156.193] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   156.193] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   156.193] (**) Option "xkb_rules" "evdev"
[   156.193] (**) Option "xkb_model" "evdev"
[   156.193] (**) Option "xkb_layout" "dvorak"
[   156.194] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[   156.194] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   156.194] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   156.194] (II) LoadModule: "synaptics"
[   156.194] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   156.194] (II) Module synaptics: vendor="X.Org Foundation"
[   156.194] 	compiled for 1.13.0, module version = 1.6.2
[   156.194] 	Module class: X.Org XInput Driver
[   156.194] 	ABI class: X.Org XInput driver, version 18.0
[   156.194] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   156.194] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   156.194] (**) Option "Device" "/dev/input/event6"
[   156.194] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[   156.194] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5756
[   156.194] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4868
[   156.194] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   156.194] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   156.194] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   156.194] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   156.194] (**) Option "TapButton1" "1"
[   156.194] (**) Option "TapButton2" "2"
[   156.194] (**) Option "TapButton3" "3"
[   156.194] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   156.195] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   156.196] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[   156.196] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[   156.196] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   156.196] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[   156.196] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[   156.197] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   156.197] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   156.197] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   156.197] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   156.197] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   156.197] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   156.197] (II) No input driver specified, ignoring this device.
[   156.197] (II) This device may have been added with another device file.
[   156.197] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event9)
[   156.197] (II) No input driver specified, ignoring this device.
[   156.197] (II) This device may have been added with another device file.
[   156.197] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[   156.197] (II) No input driver specified, ignoring this device.
[   156.197] (II) This device may have been added with another device file.
[   156.197] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[   156.197] (II) No input driver specified, ignoring this device.
[   156.197] (II) This device may have been added with another device file.
[   156.198] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event5)
[   156.198] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   156.198] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[   156.198] (**) HP WMI hotkeys: always reports core events
[   156.198] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event5"
[   156.198] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[   156.198] (--) evdev: HP WMI hotkeys: Found keys
[   156.198] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[   156.198] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[   156.198] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 13)
[   156.198] (**) Option "xkb_rules" "evdev"
[   156.198] (**) Option "xkb_model" "evdev"
[   156.198] (**) Option "xkb_layout" "dvorak"
[   162.491] (II) AIGLX: Suspending AIGLX clients for VT switch
[   163.800] (II) evdev: HP WMI hotkeys: Close
[   163.800] (II) UnloadModule: "evdev"
[   163.800] (II) UnloadModule: "synaptics"
[   163.800] (II) evdev: AT Translated Set 2 keyboard: Close
[   163.800] (II) UnloadModule: "evdev"
[   163.800] (II) evdev: HP TrueVision HD: Close
[   163.800] (II) UnloadModule: "evdev"
[   163.800] (II) evdev: Power Button: Close
[   163.800] (II) UnloadModule: "evdev"
[   163.800] (II) evdev: Video Bus: Close
[   163.800] (II) UnloadModule: "evdev"
[   163.800] (II) evdev: Video Bus: Close
[   163.800] (II) UnloadModule: "evdev"
[   163.800] (II) evdev: Power Button: Close
[   163.800] (II) UnloadModule: "evdev"
[   163.803] Server terminated successfully (0). Closing log file.

And the end of my dmesg:

[   10.988003] systemd-udevd[241]: starting version 195
[   11.628821] scsi6 : vhba
[   11.739662] fuse init (API version 7.20)
[   11.812527] vboxdrv: Found 8 processor cores.
[   11.813458] vboxdrv: fAsync=0 offMin=0x1a2 offMax=0x12384
[   11.813541] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   11.813543] vboxdrv: Successfully loaded version 4.2.4_OSE (interface 0x001a0004).
[   12.327035] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
[   12.363662] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
[   12.363986] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
[   12.364299] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
[   12.364594] microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x1a
[   12.364874] microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x1a
[   12.365150] microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x1a
[   12.365391] microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x1a
[   12.365731] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   12.542992] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input1
[   12.545104] ACPI: Lid Switch [LID]
[   12.568182] thermal LNXTHERM:00: registered as thermal_zone0
[   12.568185] ACPI: Thermal Zone [THRM] (71 C)
[   12.590637] ACPI: Battery Slot [BAT0] (battery present)
[   12.592331] ACPI: AC Adapter [AC] (off-line)
[   12.592409] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[   12.592416] ACPI: Power Button [PWRB]
[   12.592561] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   12.592566] ACPI: Power Button [PWRF]
[   12.626571] mei 0000:00:16.0: setting latency timer to 64
[   12.626643] mei 0000:00:16.0: irq 50 for MSI/MSI-X
[   12.636398] mei 0000:00:16.0: wd: failed to find the client
[   12.645655] wmi: Mapper loaded
[   12.657976] ACPI Warning: 0x0000000000006040-0x000000000000605f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
[   12.657982] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.818091] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[   12.818098] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.818102] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
[   12.818106] ACPI Warning: 0x0000000000000500-0x000000000000057f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120711/utaddress-251)
[   12.818109] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.818110] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.864145] ACPI: Requesting acpi_cpufreq
[   12.885174] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   12.916270] iTCO_vendor_support: vendor-support=0
[   13.042996] sdhci: Secure Digital Host Controller Interface driver
[   13.042999] sdhci: Copyright(c) Pierre Ossman
[   13.044825] sdhci-pci 0000:13:00.1: SDHCI controller found [10ec:5209] (rev 1)
[   13.044922] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   13.044942] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   13.044971] Registered led device: mmc0::
[   13.069046] mmc0: SDHCI controller on PCI [0000:13:00.1] using DMA
[   13.072480] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   13.102274] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   13.132086] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   13.162159] sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   13.234685] input: HP WMI hotkeys as /devices/virtual/input/input5
[   13.237299] hp_accel: laptop model unknown, using default axes configuration
[   13.277896] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   13.277975] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   13.278203] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.401681] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
[   13.402795] Initializing Realtek PCIE storage driver...
[   13.402981] Resource length: 0x1000
[   13.403028] Original address: 0xc3501000, remapped address: 0xffffc90000c3e000
[   13.403032] pci->irq = 18
[   13.403041] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[   13.415705] [drm] Initialized drm 1.1.0 20060810
[   13.449476] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   13.449747] r8169 0000:07:00.0: irq 51 for MSI/MSI-X
[   13.449862] r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c72000, 08:2e:5f:7e:ac:10, XID 0c900800 IRQ 51
[   13.449864] r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   13.605601] scsi7 : SCSI emulation for PCI-Express Mass Storage devices
[   13.606059] rts_pstor: waiting for device to settle before scanning
[   13.609521] lis3lv02d: 8 bits 3DC sensor found
[   13.771867] cfg80211: Calling CRDA to update world regulatory domain
[   13.880414] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[   14.052375] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1680, fw id: 726294
[   14.100284] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[   14.136922] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   14.136925] Copyright(c) 2003-2012 Intel Corporation
[   14.137050] iwlwifi 0000:0d:00.0: pci_resource_len = 0x00002000
[   14.137059] iwlwifi 0000:0d:00.0: pci_resource_base = ffffc90000c74000
[   14.137061] iwlwifi 0000:0d:00.0: HW Revision ID = 0x0
[   14.137147] iwlwifi 0000:0d:00.0: irq 53 for MSI/MSI-X
[   14.159438] [drm] radeon defaulting to kernel modesetting.
[   14.159440] [drm] radeon kernel modesetting enabled.
[   14.159451] VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[   14.159477] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[   14.159731] [drm] initializing kernel modesetting (TURKS 0x1002:0x6740 0x103C:0x3388).
[   14.159800] [drm] register mmio base: 0xC6500000
[   14.159801] [drm] register mmio size: 131072
[   14.290660] ATOM BIOS: HP/Flex
[   14.290702] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[   14.290704] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[   14.290711] mtrr: no more MTRRs available
[   14.290712] [drm] Detected VRAM RAM=2048M, BAR=256M
[   14.290713] [drm] RAM width 128bits DDR
[   14.290751] [TTM] Zone  kernel: Available graphics memory: 4064304 kiB
[   14.290752] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   14.290753] [TTM] Initializing pool allocator
[   14.290756] [TTM] Initializing DMA pool allocator
[   14.290772] [drm] radeon: 2048M of VRAM memory ready
[   14.290773] [drm] radeon: 512M of GTT memory ready.
[   14.290782] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   14.290783] [drm] Driver supports precise vblank timestamp query.
[   14.290824] radeon 0000:01:00.0: irq 54 for MSI/MSI-X
[   14.290833] radeon 0000:01:00.0: radeon: using MSI.
[   14.290871] [drm] radeon: irq initialized.
[   14.290874] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   14.291163] [drm] probing gen 2 caps for device 8086:101 = 2/0
[   14.291164] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   14.291229] [drm] Loading TURKS Microcode
[   14.373292] ------------[ cut here ]------------
[   14.373312] WARNING: at drivers/misc/lis3lv02d/lis3lv02d.c:215 lis3lv02d_get_pwron_wait+0x60/0x70 [lis3lv02d]()
[   14.373316] Hardware name: HP Pavilion dv6 Notebook PC
[   14.373318] device returned spurious data
[   14.373322] Modules linked in:
[   14.373325]  joydev i915(+) radeon(+) iwlwifi ttm snd_hda_intel(+) snd_hda_codec cfg80211 intel_agp intel_gtt snd_hwdep snd_pcm snd_page_alloc snd_timer snd drm_kms_helper soundcore r8169 drm rts_pstor(C) acpi_cpufreq iTCO_wdt hp_accel(+) hp_wmi lis3lv02d psmouse sparse_keymap mperf sdhci_pci sdhci mmc_core coretemp kvm_intel rfkill mii iTCO_vendor_support pcspkr evdev input_polldev processor serio_raw lpc_ich i2c_algo_bit kvm i2c_i801 i2c_core wmi mei ac battery thermal video button microcode vboxdrv(O) fuse vhba(O) ext4 crc16 jbd2 mbcache xts gf128mul dm_crypt dm_mod sr_mod cdrom sd_mod xhci_hcd crc32c_intel ghash_clmulni_intel ahci libahci aesni_intel libata aes_x86_64 aes_generic ablk_helper cryptd scsi_mod ehci_hcd usbcore usb_common
[   14.373443] Pid: 262, comm: systemd-udevd Tainted: G         C O 3.6.6-1-ARCH #1
[   14.373446] Call Trace:
[   14.373461]  [<ffffffff81055c7f>] warn_slowpath_common+0x7f/0xc0
[   14.373474]  [<ffffffff81055d76>] warn_slowpath_fmt+0x46/0x50
[   14.373484]  [<ffffffffa00a722d>] ? lis3lv02d_get_odr+0x1d/0x50 [lis3lv02d]
[   14.373492]  [<ffffffffa00a7730>] lis3lv02d_get_pwron_wait+0x60/0x70 [lis3lv02d]
[   14.373501]  [<ffffffffa00a7797>] lis3lv02d_poweron+0x57/0xc0 [lis3lv02d]
[   14.373512]  [<ffffffffa00a7fef>] lis3lv02d_init_device+0x16f/0x5c0 [lis3lv02d]
[   14.373525]  [<ffffffffa020936d>] lis3lv02d_add+0xdd/0x1c8 [hp_accel]
[   14.373535]  [<ffffffff812ba203>] acpi_device_probe+0x50/0x11d
[   14.373547]  [<ffffffff8133037b>] driver_probe_device+0x7b/0x240
[   14.373556]  [<ffffffff813305eb>] __driver_attach+0xab/0xb0
[   14.373564]  [<ffffffff81330540>] ? driver_probe_device+0x240/0x240
[   14.373572]  [<ffffffff8132e635>] bus_for_each_dev+0x55/0x90
[   14.373581]  [<ffffffff8132febe>] driver_attach+0x1e/0x20
[   14.373588]  [<ffffffff8132fa50>] bus_add_driver+0x190/0x260
[   14.373598]  [<ffffffffa0053000>] ? 0xffffffffa0052fff
[   14.373606]  [<ffffffff81330cb7>] driver_register+0x77/0x170
[   14.373614]  [<ffffffffa0053000>] ? 0xffffffffa0052fff
[   14.373622]  [<ffffffff812ba9e7>] acpi_bus_register_driver+0x3e/0x47
[   14.373632]  [<ffffffffa0053019>] lis3lv02d_init_module+0x19/0x37 [hp_accel]
[   14.373639]  [<ffffffff8100212a>] do_one_initcall+0x12a/0x180
[   14.373649]  [<ffffffff810ba804>] sys_init_module+0x84/0x1e0
[   14.373659]  [<ffffffff81499f2d>] system_call_fastpath+0x1a/0x1f
[   14.373664] ---[ end trace 430fd914b5483077 ]---
[   14.373768] hp_accel: driver loaded
[   14.453324] iwlwifi 0000:0d:00.0: loaded firmware version 39.31.5.1 build 35138
[   14.604352] scsi 7:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[   14.604691] rts_pstor: device scan complete
[   14.605095] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[   14.609019] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[   14.795080] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   14.795262] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   14.795311] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   14.797486] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   14.797608] radeon 0000:01:00.0: WB enabled
[   14.797610] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8802519eac00
[   14.814126] [drm] ring test on 0 succeeded in 3 usecs
[   14.814334] [drm] ib test on ring 0 succeeded in 0 usecs
[   14.814468] [drm] Radeon Display Connectors
[   14.820839] [drm] Internal thermal controller with fan control
[   14.822096] [drm] radeon: power management initialized
[   14.822210] No connectors reported connected with modes
[   14.822220] [drm] Cannot find any crtc or sizes - going 1024x768
[   14.823598] [drm] fb mappable at 0xA0142000
[   14.823599] [drm] vram apper at 0xA0000000
[   14.823600] [drm] size 3145728
[   14.823601] [drm] fb depth is 24
[   14.823601] [drm]    pitch is 4096
[   14.826413] Console: switching to colour frame buffer device 128x48
[   14.828438] fb0: radeondrmfb frame buffer device
[   14.828439] drm: registered panic notifier
[   14.828442] [drm] Initialized radeon 2.24.0 20080528 for 0000:01:00.0 on minor 0
[   14.828706] pci 0000:00:00.0: Intel Sandybridge Chipset
[   14.828767] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[   14.829718] pci 0000:00:00.0: detected 32768K stolen memory
[   14.829767] i915 0000:00:02.0: setting latency timer to 64
[   14.851123] i915 0000:00:02.0: irq 55 for MSI/MSI-X
[   14.851130] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   14.851131] [drm] Driver supports precise vblank timestamp query.
[   14.851828] vga_switcheroo: enabled
[   14.851870] radeon atpx: version is 1
[   14.851891] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[   14.851893] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   14.921282] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[   14.921285] iwldvm: Copyright(c) 2003-2012 Intel Corporation
[   14.921299] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   14.921300] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   14.921301] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   14.921302] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[   14.921304] iwlwifi 0000:0d:00.0: CONFIG_IWLWIFI_P2P disabled
[   14.921305] iwlwifi 0000:0d:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[   14.921373] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
[   14.942888] iwlwifi 0000:0d:00.0: device EEPROM VER=0x15d, CALIB=0x6
[   14.942890] iwlwifi 0000:0d:00.0: Device SKU: 0x50
[   14.942891] iwlwifi 0000:0d:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
[   14.942984] Registered led device: phy0-led
[   15.033425] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   15.287522] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[   15.411605] fbcon: inteldrmfb (fb1) is primary device
[   15.411611] fbcon: Remapping primary device, fb1, to tty 1-63
[   15.416191] Linux media interface: v0.10
[   15.436279] Linux video capture interface: v2.00
[   15.574063] uvcvideo: Found UVC 1.00 device HP TrueVision HD (064e:d281)
[   15.577593] input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
[   15.577817] usbcore: registered new interface driver uvcvideo
[   15.577818] USB Video Class driver (1.1.1)
[   15.834950] fb1: inteldrmfb frame buffer device
[   15.835080] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[   15.835747] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[   15.835789] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input12
[   15.836455] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   15.836496] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
[   15.836612] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
[   17.671192] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   17.771542] EXT4-fs (sda4): mounting ext3 file system using the ext4 subsystem
[   17.777389] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)

Last edited by urza9814 (2012-12-02 17:50:25)

Offline

#2 2012-11-16 17:38:57

Xabre
Member
From: Serbia
Registered: 2009-03-19
Posts: 581

Re: [Solved] Systemd broke KDE

(WW) module ABI major version (12) doesn't match the server's version (13)

Is your system fully upgraded? Something there is built for ABI 12, and ABI 13 is the currently used one.
Check your packages, rebuild propriatary driver if you use it, and all othe suspects.

Offline

#3 2012-11-16 19:32:37

urza9814
Member
Registered: 2010-06-05
Posts: 28

Re: [Solved] Systemd broke KDE

It is fully upgraded except my video drivers (ATI) as X would not start with the updated drivers (had a post about that earlier this week; I'd link it but I'm on my phone)

Offline

#4 2012-11-16 19:43:22

Cdh
Member
Registered: 2009-02-03
Posts: 1,098

Re: [Solved] Systemd broke KDE

All the x.org drivers/modules are compiled for a specific version of X. The older X driver will probably work, as long as it is not too old to be compatible at all, but you need to recompile it and it will automatically choose the 1.13 ABI of the installed x.org server as long as support for 1.13 is already in the driver.

Personally I would just recommend upgrading to xf86-video-ati-git from aur instead of downgrading.

Last edited by Cdh (2012-11-16 19:44:09)


฿ 18PRsqbZCrwPUrVnJe1BZvza7bwSDbpxZz

Offline

#5 2012-11-16 20:05:04

Xabre
Member
From: Serbia
Registered: 2009-03-19
Posts: 581

Re: [Solved] Systemd broke KDE

What Cdh said, with one small note:  I love this new trend of blaming systemd for just about anything, when it's rarely it's fault.

Offline

#6 2012-11-16 23:49:35

urza9814
Member
Registered: 2010-06-05
Posts: 28

Re: [Solved] Systemd broke KDE

Cdh wrote:

All the x.org drivers/modules are compiled for a specific version of X. The older X driver will probably work, as long as it is not too old to be compatible at all, but you need to recompile it and it will automatically choose the 1.13 ABI of the installed x.org server as long as support for 1.13 is already in the driver.

Personally I would just recommend upgrading to xf86-video-ati-git from aur instead of downgrading.

I have the 1.13 Xorg server installed; I installed xf86-video-ati-git from the aur and X stopped loading with the following errors:

[    71.507] (II) intel(0): using device path '/dev/dri/card1'
[    71.507] (II) [KMS] Kernel modesetting enabled.
[    71.507] (WW) Falling back to old probe method for vesa
[    71.507] (WW) Falling back to old probe method for fbdev
[    71.507] (II) Loading sub module "fbdevhw"
[    71.507] (II) LoadModule: "fbdevhw"
[    71.508] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    71.508] (II) Module fbdevhw: vendor="X.Org Foundation"
[    71.508] 	compiled for 1.13.0, module version = 0.0.2
[    71.508] 	ABI class: X.Org Video Driver, version 13.1
[    71.508] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    71.508] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    71.508] (==) intel(0): RGB weight 888
[    71.508] (==) intel(0): Default visual is TrueColor
[    71.508] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[    71.508] (**) intel(0): Relaxed fencing enabled
[    71.508] (**) intel(0): Wait on SwapBuffers? enabled
[    71.508] (**) intel(0): Triple buffering? enabled
[    71.508] (**) intel(0): Framebuffer tiled
[    71.508] (**) intel(0): Pixmaps tiled
[    71.508] (**) intel(0): 3D buffers tiled
[    71.508] (**) intel(0): SwapBuffers wait enabled
[    71.508] (==) intel(0): video overlay key set to 0x101fe
[    71.508] (II) intel(0): Output LVDS1 has no monitor section
[    71.508] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[    71.520] (II) intel(0): Output VGA1 has no monitor section
[    71.521] (II) intel(0): Output HDMI1 has no monitor section
[    71.563] (II) intel(0): Output DP1 has no monitor section
[    71.563] (II) intel(0): EDID for output LVDS1
[    71.563] (II) intel(0): Manufacturer: AUO  Model: 22ec  Serial#: 0
[    71.563] (II) intel(0): Year: 2009  Week: 1
[    71.563] (II) intel(0): EDID Version: 1.3
[    71.563] (II) intel(0): Digital Display Input
[    71.563] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    71.563] (II) intel(0): Gamma: 2.20
[    71.563] (II) intel(0): No DPMS capabilities specified
[    71.563] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    71.563] (II) intel(0): First detailed timing is preferred mode
[    71.563] (II) intel(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[    71.563] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    71.563] (II) intel(0): Manufacturer's mask: 0
[    71.563] (II) intel(0): Supported detailed timing:
[    71.563] (II) intel(0): clock: 69.3 MHz   Image Size:  344 x 193 mm
[    71.563] (II) intel(0): h_active: 1366  h_sync: 1398  h_sync_end 1422 h_blank_end 1432 h_border: 0
[    71.563] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 806 v_border: 0
[    71.563] (II) intel(0): Unknown vendor-specific block f
[    71.563] (II) intel(0):  AUO
[    71.563] (II) intel(0):  B156XW02 V2
[    71.563] (II) intel(0): EDID (in hex):
[    71.563] (II) intel(0): 	00ffffffffffff0006afec2200000000
[    71.563] (II) intel(0): 	01130103802213780ac8959e57549226
[    71.563] (II) intel(0): 	0f505400000001010101010101010101
[    71.563] (II) intel(0): 	010101010101121b5642500026302018
[    71.563] (II) intel(0): 	340058c1100000180000000f00000000
[    71.563] (II) intel(0): 	00000000000000000020000000fe0041
[    71.563] (II) intel(0): 	554f0a202020202020202020000000fe
[    71.563] (II) intel(0): 	004231353658573032205632200a00c0
[    71.563] (II) intel(0): EDID vendor "AUO", prod id 8940
[    71.563] (II) intel(0): Printing DDC gathered Modelines:
[    71.563] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1422 1432  768 771 775 806 -hsync -vsync (48.4 kHz eP)
[    71.564] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    71.564] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    71.564] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    71.564] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    71.564] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    71.564] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    71.564] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    71.564] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    71.564] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    71.564] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    71.564] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    71.564] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    71.564] (II) intel(0): Printing probed modes for output LVDS1
[    71.564] (II) intel(0): Modeline "1366x768"x60.0   69.30  1366 1398 1422 1432  768 771 775 806 -hsync -vsync (48.4 kHz eP)
[    71.564] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    71.564] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    71.564] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    71.564] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    71.577] (II) intel(0): EDID for output VGA1
[    71.577] (II) intel(0): EDID for output HDMI1
[    71.620] (II) intel(0): EDID for output DP1
[    71.620] (II) intel(0): Output LVDS1 connected
[    71.620] (II) intel(0): Output VGA1 disconnected
[    71.620] (II) intel(0): Output HDMI1 disconnected
[    71.620] (II) intel(0): Output DP1 disconnected
[    71.620] (II) intel(0): Using exact sizes for initial modes
[    71.620] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    71.620] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    71.620] (II) intel(0): Kernel page flipping support detected, enabling
[    71.620] (**) intel(0): Display dimensions: (340, 190) mm
[    71.620] (**) intel(0): DPI set to (102, 102)
[    71.620] (II) Loading sub module "fb"
[    71.620] (II) LoadModule: "fb"
[    71.620] (II) Loading /usr/lib/xorg/modules/libfb.so
[    71.620] (II) Module fb: vendor="X.Org Foundation"
[    71.620] 	compiled for 1.13.0, module version = 1.0.0
[    71.620] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    71.620] (II) Loading sub module "dri2"
[    71.620] (II) LoadModule: "dri2"
[    71.620] (II) Module "dri2" already built-in
[    71.620] (==) RADEON(G0): Depth 24, (--) framebuffer bpp 32
[    71.620] (II) RADEON(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    71.620] (==) RADEON(G0): Default visual is TrueColor
[    71.620] (==) RADEON(G0): RGB weight 888
[    71.620] (II) RADEON(G0): Using 8 bits per RGB (8 bit DAC)
[    71.620] (--) RADEON(G0): Chipset: "TURKS" (ChipID = 0x6740)
[    71.620] (II) Loading sub module "dri2"
[    71.620] (II) LoadModule: "dri2"
[    71.620] (II) Module "dri2" already built-in
[    71.620] (II) Loading sub module "exa"
[    71.620] (II) LoadModule: "exa"
[    71.620] (II) Loading /usr/lib/xorg/modules/libexa.so
[    71.620] (II) Module exa: vendor="X.Org Foundation"
[    71.620] 	compiled for 1.13.0, module version = 2.6.0
[    71.620] 	ABI class: X.Org Video Driver, version 13.1
[    71.620] (II) RADEON(G0): KMS Color Tiling: enabled
[    71.620] (II) RADEON(G0): KMS Color Tiling 2D: enabled
[    71.620] (II) RADEON(G0): KMS Pageflipping: enabled
[    71.620] (II) RADEON(G0): SwapBuffers wait for vsync: enabled
[    71.620] (WW) RADEON(G0): No outputs definitely connected, trying again...
[    71.620] (WW) RADEON(G0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[    71.620] (II) RADEON(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    71.620] (EE) 
[    71.620] (EE) Backtrace:
[    71.621] (EE) 0: X (xorg_backtrace+0x36) [0x58a326]
[    71.621] (EE) 1: X (0x400000+0x18e179) [0x58e179]
[    71.621] (EE) 2: /usr/lib/libpthread.so.0 (0x7f435a79e000+0xf1a0) [0x7f435a7ad1a0]
[    71.621] (EE) 3: X (xf86SetScrnInfoModes+0x275) [0x4acc35]
[    71.621] (EE) 4: X (xf86InitialConfiguration+0x15b8) [0x4b05e8]
[    71.621] (EE) 5: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x7f4357b18000+0x464b3) [0x7f4357b5e4b3]
[    71.621] (EE) 6: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x7f4357b18000+0x42124) [0x7f4357b5a124]
[    71.621] (EE) 7: X (InitOutput+0xb3e) [0x479fde]
[    71.621] (EE) 8: X (0x400000+0x26786) [0x426786]
[    71.621] (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f435942c725]
[    71.621] (EE) 10: X (0x400000+0x26cad) [0x426cad]
[    71.621] (EE) 
[    71.621] (EE) Segmentation fault at address 0x0
[    71.621] 
Fatal server error:
[    71.621] Caught signal 11 (Segmentation fault). Server aborting
[    71.621] 
[    71.621] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    71.621] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    71.621] (EE) 
[    71.627] Server terminated with error (1). Closing log file.

I also tried installing xorg-server-git from the aur just to be sure both were as new as possible, but that didn't make any difference.



What Cdh said, with one small note:  I love this new trend of blaming systemd for just about anything, when it's rarely it's fault.

Probably should have included this in the original post: If I remove the systemd init line before booting, KDE comes up just fine (but my wifi doesn't work anymore, which is why I'm trying to switch to systemd). If I leave systemd on, it doesn't. Seems logical to assume systemd is somehow involved.

Last edited by urza9814 (2012-11-17 00:18:31)

Offline

#7 2012-11-17 00:48:57

Cdh
Member
Registered: 2009-02-03
Posts: 1,098

Re: [Solved] Systemd broke KDE

Well, for reference it's probably a good idea to paste this bug (I certainly didn't know about it):
https://bugs.freedesktop.org/show_bug.cgi?id=56986

It does seem until it is fixed upstream you need to use the 6.xxx radeon driver... Someone seems to have create a convenient aur package for that one too:
https://aur.archlinux.org/packages.php?ID=53897


฿ 18PRsqbZCrwPUrVnJe1BZvza7bwSDbpxZz

Offline

#8 2012-11-17 18:50:50

urza9814
Member
Registered: 2010-06-05
Posts: 28

Re: [Solved] Systemd broke KDE

OK, well KDE started up once again last night...then I rebooted to see if it was fixed, and haven't gotten it back since.


So...since that doesn't seem to be going anywhere right now -- anyone here know exactly what I'd need to downgrade to get my wifi (iwlagn) and audio (intel-hda-audio I think) working again without systemd?

Offline

#9 2012-12-02 17:50:08

urza9814
Member
Registered: 2010-06-05
Posts: 28

Re: [Solved] Systemd broke KDE

Well, I was hoping an update would fix this but since none have yet I decided to poke around a bit more and seem to have gotten everything working by switching from kdm to xdm. For anyone else experiencing similar issues who hasn't tried that yet:

sudo systemctl disable kdm
sudo systemctl enable xdm
echo "exec startkde" > ~/.xsession
chmod 744 ~/.xsession

Offline

#10 2012-12-03 13:53:31

Cdh
Member
Registered: 2009-02-03
Posts: 1,098

Re: [Solved] Systemd broke KDE

Drag & drop of files from dolphin to thunderbird doesn't work anymore. oO


฿ 18PRsqbZCrwPUrVnJe1BZvza7bwSDbpxZz

Offline

Board footer

Powered by FluxBB