You are not logged in.

#1 2012-12-17 06:24:45

Deerenaros
Member
Registered: 2012-12-17
Posts: 1

acpi on Samsung 355V4C | brightness

I tried to change backlight variety of ways. But nothing works.

Ways have been tried:

  • Set with acpi by writing file '/sys/class/backlight/acpi_video0/brightness' like light utility.

  • Set directly by setpci.

  • Many ways from [SOLVED] topics in the Internet

All, that I used here below. If you need more - just ask.
lspci

00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 9900
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Trinity HDMI Audio Controller
00:02.0 PCI bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:04.0 PCI bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices [AMD] FCH USB XHCI Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices [AMD] FCH SMBus Controller (rev 14)
00:14.2 Audio device: Advanced Micro Devices [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices [AMD] FCH PCI Bridge (rev 40)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 09)
03:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01)

dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.6.9-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Tue Dec 4 08:04:10 CET 2012
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9403958f-8632-4479-9d2d-1efbc75c65f3 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000756a5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000756a6000-0x00000000756b9fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000756ba000-0x0000000075a22fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000075a23000-0x0000000075d14fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000075d15000-0x0000000075d15fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000075d16000-0x0000000075f18fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000075f19000-0x000000007665ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000076660000-0x00000000767f2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000767f3000-0x00000000767fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff010000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.7 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 355V4C/355V4X/355V5C/355V5X/356V4C/356V4X/356V5C/356V5X/3445VC/3445VX/3545VC/3545VX/NP355V4C-S01RU, BIOS P02AAN 06/07/2012
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x76800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-D0FFF write-protect
[    0.000000]   D1000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000076800000 mask FFFFFF800000 uncachable
[    0.000000]   2 base 000077000000 mask FFFFFF000000 uncachable
[    0.000000]   3 base 000078000000 mask FFFFF8000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000fd7b0-0x000fd7bf] mapped at [ffff8800000fd7b0]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x767fffff]
[    0.000000]  [mem 0x00000000-0x3fffffff] page 1G
[    0.000000]  [mem 0x40000000-0x767fffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x767fffff @ [mem 0x1fffe000-0x1fffffff]
[    0.000000] RAMDISK: [mem 0x37a70000-0x37d2ffff]
[    0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000759fb078 00074 (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0000000075a040f0 000F4 (v04 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120711/tbfadt-598)
[    0.000000] ACPI: DSDT 00000000759fb188 08F61 (v02 SECCSD LH43STAR 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0000000075a1ae80 00040
[    0.000000] ACPI: APIC 0000000075a041e8 00072 (v03 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0000000075a04260 00044 (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0000000075a042a8 0003C (v01 SECCSD LH43STAR 01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0000000075a042e8 00038 (v01 SECCSD LH43STAR 01072009 AMI  00000005)
[    0.000000] ACPI: IFEU 0000000075a04320 00042 (v01 SECCSD LH43STAR 01072009      00000000)
[    0.000000] ACPI: SSDT 0000000075a04368 00B9C (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0000000075a04f08 01ED4 (v02    AMD     ALIB 00000001 MSFT 04000000)
[    0.000000] ACPI: CRAT 0000000075a06de0 002A8 (v01 AMD    AGESA    00000001 AMD  00000001)
[    0.000000] ACPI: SLIC 0000000075a07088 00176 (v01 SECCSD LH43STAR 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000767fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x767fffff]
[    0.000000]   NODE_DATA [mem 0x767fc000-0x767fffff]
[    0.000000]  [ffffea0000000000-ffffea0001dfffff] PMD -> [ffff880073400000-ffff8800751fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x756a5fff]
[    0.000000]   node   0: [mem 0x75d15000-0x75d15fff]
[    0.000000]   node   0: [mem 0x75f19000-0x7665ffff]
[    0.000000]   node   0: [mem 0x767f3000-0x767fffff]
[    0.000000] On node 0 totalpages: 482698
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7520 pages used for memmap
[    0.000000]   DMA32 zone: 471195 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000756a6000 - 00000000756ba000
[    0.000000] PM: Registered nosave memory: 00000000756ba000 - 0000000075a23000
[    0.000000] PM: Registered nosave memory: 0000000075a23000 - 0000000075d15000
[    0.000000] PM: Registered nosave memory: 0000000075d16000 - 0000000075f19000
[    0.000000] PM: Registered nosave memory: 0000000076660000 - 00000000767f3000
[    0.000000] e820: [mem 0x76800000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880076400000 s84608 r8192 d21888 u524288
[    0.000000] pcpu-alloc: s84608 r8192 d21888 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 475108
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9403958f-8632-4479-9d2d-1efbc75c65f3 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 0 size 32 MB
[    0.000000] Memory: 1885564k/1941504k available (4727k kernel code, 10712k absent, 45228k reserved, 4143k data, 772k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 7864320 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2295.641 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4593.58 BogoMIPS (lpj=7652136)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000047] Security Framework initialized
[    0.000052] AppArmor: AppArmor disabled by boot time parameter
[    0.000226] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000905] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.001207] Mount-cache hash table entries: 256
[    0.001419] Initializing cgroup subsys cpuacct
[    0.001422] Initializing cgroup subsys memory
[    0.001432] Initializing cgroup subsys devices
[    0.001434] Initializing cgroup subsys freezer
[    0.001435] Initializing cgroup subsys net_cls
[    0.001437] Initializing cgroup subsys blkio
[    0.001462] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[    0.001465] tseg: 0076800000
[    0.001466] CPU: Physical Processor ID: 0
[    0.001468] CPU: Processor Core ID: 0
[    0.001469] mce: CPU supports 7 MCE banks
[    0.001483] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift is 0xffffffff
[    0.002356] ACPI: Core revision 20120711
[    0.010309] ftrace: allocating 18350 entries in 72 pages
[    0.018032] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.051034] smpboot: CPU0: AMD A10-4600M APU with Radeon(tm) HD Graphics   stepping 01
[    0.156675] Performance Events: 
[    0.156676] perf: AMD core performance counters detected
[    0.156679] AMD PMU driver.
[    0.156681] ... version:                0
[    0.156682] ... bit width:              48
[    0.156683] ... generic registers:      6
[    0.156684] ... value mask:             0000ffffffffffff
[    0.156685] ... max period:             00007fffffffffff
[    0.156686] ... fixed-purpose events:   0
[    0.156687] ... event mask:             000000000000003f
[    0.183551] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.207926] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[    0.234533] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[    0.196805] smpboot: Booting Node   0, Processors  #1 #2 #3 OK
[    0.261180] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support
[    0.263500] Brought up 4 CPUs
[    0.263509] smpboot: Total of 4 processors activated (18372.34 BogoMIPS)
[    0.265841] devtmpfs: initialized
[    0.270685] PM: Registering ACPI NVS region [mem 0x756ba000-0x75a22fff] (3575808 bytes)
[    0.270874] PM: Registering ACPI NVS region [mem 0x75d16000-0x75f18fff] (2109440 bytes)
[    0.274285] NET: Registered protocol family 16
[    0.274860] ACPI: bus type pci registered
[    0.275043] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.275051] PCI: not using MMCONFIG
[    0.275055] PCI: Using configuration type 1 for base access
[    0.275058] PCI: Using configuration type 1 for extended access
[    0.275570] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.275573] mtrr: probably your BIOS does not setup all CPUs.
[    0.275576] mtrr: corrected configuration.
[    0.276970] bio: create slab <bio-0> at 0
[    0.277162] ACPI: Added _OSI(Module Device)
[    0.277167] ACPI: Added _OSI(Processor Device)
[    0.277172] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.277176] ACPI: Added _OSI(Processor Aggregator Device)
[    0.282972] ACPI: EC: Look up EC in DSDT
[    0.289010] ACPI: Executed 1 blocks of module-level executable AML code
[    0.301538] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.303880] ACPI: Interpreter enabled
[    0.303884] ACPI: (supports S0 S3 S4 S5)
[    0.303915] ACPI: Using IOAPIC for interrupt routing
[    0.304090] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.304140] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.365260] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.365479] ACPI: No dock devices found.
[    0.365484] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.365858] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.366218] PCI host bridge to bus 0000:00
[    0.366222] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[    0.366225] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.366227] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]
[    0.366229] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]
[    0.366232] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]
[    0.366234] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.366236] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.366238] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.366240] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xffffffff]
[    0.366248] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[    0.366290] pci 0000:00:01.0: [1002:9900] type 00 class 0x030000
[    0.366299] pci 0000:00:01.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[    0.366305] pci 0000:00:01.0: reg 14: [io  0xf000-0xf0ff]
[    0.366311] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[    0.366349] pci 0000:00:01.0: supports D1 D2
[    0.366364] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[    0.366371] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
[    0.366416] pci 0000:00:01.1: supports D1 D2
[    0.366434] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
[    0.366480] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.366499] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
[    0.366544] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.366562] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
[    0.366609] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.366656] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[    0.366677] pci 0000:00:10.0: reg 10: [mem 0xfeb48000-0xfeb49fff 64bit]
[    0.366784] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.366825] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
[    0.366845] pci 0000:00:11.0: reg 10: [io  0xf140-0xf147]
[    0.366854] pci 0000:00:11.0: reg 14: [io  0xf130-0xf133]
[    0.366864] pci 0000:00:11.0: reg 18: [io  0xf120-0xf127]
[    0.366874] pci 0000:00:11.0: reg 1c: [io  0xf110-0xf113]
[    0.366883] pci 0000:00:11.0: reg 20: [io  0xf100-0xf10f]
[    0.366893] pci 0000:00:11.0: reg 24: [mem 0xfeb4c000-0xfeb4c7ff]
[    0.366954] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.366968] pci 0000:00:12.0: reg 10: [mem 0xfeb4b000-0xfeb4bfff]
[    0.367041] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.367060] pci 0000:00:12.2: reg 10: [mem 0xfeb4a000-0xfeb4a0ff]
[    0.367143] pci 0000:00:12.2: supports D1 D2
[    0.367145] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.367170] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.367249] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.367270] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[    0.367337] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.367353] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.367430] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.367481] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[    0.367502] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[    0.367523] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[    0.367543] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[    0.367567] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[    0.367586] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[    0.367640] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
[    0.367654] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[    0.367670] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.367682] pci 0000:01:00.0: reg 18: [mem 0xfea20000-0xfea3ffff 64bit]
[    0.367690] pci 0000:01:00.0: reg 20: [io  0xe000-0xe0ff]
[    0.367705] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref]
[    0.367741] pci 0000:01:00.0: supports D1 D2
[    0.376701] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.376714] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.376718] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.376722] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.376758] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[    0.376791] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.376816] pci 0000:02:00.0: reg 10: [io  0xd000-0xd0ff]
[    0.376843] pci 0000:02:00.0: reg 18: [mem 0xd8004000-0xd8004fff 64bit pref]
[    0.376862] pci 0000:02:00.0: reg 20: [mem 0xd8000000-0xd8003fff 64bit pref]
[    0.376936] pci 0000:02:00.0: supports D1 D2
[    0.376938] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.386714] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.386724] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.386733] pci 0000:00:04.0:   bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
[    0.386768] pci_bus 0000:03: busn_res: [bus 03-0b] is inserted under [bus 00-ff]
[    0.386789] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[    0.386811] pci 0000:03:00.0: reg 10: [mem 0xfe900000-0xfe97ffff 64bit]
[    0.386853] pci 0000:03:00.0: reg 30: [mem 0xfe980000-0xfe98ffff pref]
[    0.386901] pci 0000:03:00.0: supports D1 D2
[    0.386903] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.396700] pci 0000:00:05.0: PCI bridge to [bus 03-0b]
[    0.396714] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.396736] pci_bus 0000:0c: busn_res: [bus 0c-12] is inserted under [bus 00-ff]
[    0.396789] pci 0000:00:14.4: PCI bridge to [bus 0c-12] (subtractive decode)
[    0.396799] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af] (subtractive decode)
[    0.396801] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
[    0.396803] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df] (subtractive decode)
[    0.396805] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.396807] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.396809] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.396812] pci 0000:00:14.4:   bridge window [mem 0x7f000000-0xffffffff] (subtractive decode)
[    0.396833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.397145] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[    0.397194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[    0.397238] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
[    0.397409]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.397764]  pci0000:00: ACPI _OSC control (0x19) granted
[    0.404558] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.404636] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.404716] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.404793] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.404855] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.404902] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.404948] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.404994] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.405225] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.405238] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.405241] vgaarb: loaded
[    0.405242] vgaarb: bridge control possible 0000:01:00.0
[    0.405243] vgaarb: no bridge control possible 0000:00:01.0
[    0.405303] PCI: Using ACPI for IRQ routing
[    0.413918] PCI: pci_cache_line_size set to 64 bytes
[    0.413995] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.413997] e820: reserve RAM buffer [mem 0x756a6000-0x77ffffff]
[    0.413999] e820: reserve RAM buffer [mem 0x75d16000-0x77ffffff]
[    0.414001] e820: reserve RAM buffer [mem 0x76660000-0x77ffffff]
[    0.414003] e820: reserve RAM buffer [mem 0x76800000-0x77ffffff]
[    0.414110] NetLabel: Initializing
[    0.414111] NetLabel:  domain hash size = 128
[    0.414112] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.414126] NetLabel:  unlabeled traffic allowed by default
[    0.414142] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.414146] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.416190] Switching to clocksource hpet
[    0.423964] pnp: PnP ACPI init
[    0.423982] ACPI: bus type pnp registered
[    0.424210] pnp 00:00: [bus 00-ff]
[    0.424213] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.424216] pnp 00:00: [io  0x0000-0x03af window]
[    0.424218] pnp 00:00: [io  0x03e0-0x0cf7 window]
[    0.424220] pnp 00:00: [io  0x03b0-0x03df window]
[    0.424222] pnp 00:00: [io  0x0d00-0xffff window]
[    0.424224] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.424226] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.424228] pnp 00:00: [mem 0x7f000000-0xffffffff window]
[    0.424230] pnp 00:00: [mem 0x00000000 window]
[    0.424294] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.424339] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.424389] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.424393] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.424730] pnp 00:02: [io  0x0010-0x001f]
[    0.424733] pnp 00:02: [io  0x0022-0x003f]
[    0.424737] pnp 00:02: [io  0x0063]
[    0.424739] pnp 00:02: [io  0x0065]
[    0.424740] pnp 00:02: [io  0x0067-0x006f]
[    0.424742] pnp 00:02: [io  0x0072-0x007f]
[    0.424744] pnp 00:02: [io  0x0080]
[    0.424745] pnp 00:02: [io  0x0084-0x0086]
[    0.424747] pnp 00:02: [io  0x0088]
[    0.424749] pnp 00:02: [io  0x008c-0x008e]
[    0.424750] pnp 00:02: [io  0x0090-0x009f]
[    0.424752] pnp 00:02: [io  0x00a2-0x00bf]
[    0.424753] pnp 00:02: [io  0x00b1]
[    0.424755] pnp 00:02: [io  0x00e0-0x00ef]
[    0.424757] pnp 00:02: [io  0x04d0-0x04d1]
[    0.424759] pnp 00:02: [io  0x040b]
[    0.424760] pnp 00:02: [io  0x04d6]
[    0.424762] pnp 00:02: [io  0x0c00-0x0c01]
[    0.424763] pnp 00:02: [io  0x0c14]
[    0.424765] pnp 00:02: [io  0x0c50-0x0c51]
[    0.424767] pnp 00:02: [io  0x0c52]
[    0.424768] pnp 00:02: [io  0x0c6c]
[    0.424770] pnp 00:02: [io  0x0c6f]
[    0.424771] pnp 00:02: [io  0x0cd0-0x0cd1]
[    0.424773] pnp 00:02: [io  0x0cd2-0x0cd3]
[    0.424775] pnp 00:02: [io  0x0cd4-0x0cd5]
[    0.424776] pnp 00:02: [io  0x0cd6-0x0cd7]
[    0.424778] pnp 00:02: [io  0x0cd8-0x0cdf]
[    0.424780] pnp 00:02: [io  0x0800-0x089f]
[    0.424782] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    0.424783] pnp 00:02: [io  0x0000-0x000f]
[    0.424785] pnp 00:02: [io  0x0b20-0x0b3f]
[    0.424787] pnp 00:02: [io  0x0900-0x090f]
[    0.424788] pnp 00:02: [io  0x0910-0x091f]
[    0.424790] pnp 00:02: [io  0xfe00-0xfefe]
[    0.424792] pnp 00:02: [io  0x0060-0x005f disabled]
[    0.424794] pnp 00:02: [io  0x0064-0x0063 disabled]
[    0.424796] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[    0.424797] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[    0.424799] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[    0.424801] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[    0.424803] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[    0.424804] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[    0.424806] pnp 00:02: [mem 0xff010000-0xffffffff]
[    0.424888] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.424890] system 00:02: [io  0x040b] has been reserved
[    0.424893] system 00:02: [io  0x04d6] has been reserved
[    0.424895] system 00:02: [io  0x0c00-0x0c01] has been reserved
[    0.424897] system 00:02: [io  0x0c14] has been reserved
[    0.424899] system 00:02: [io  0x0c50-0x0c51] has been reserved
[    0.424901] system 00:02: [io  0x0c52] has been reserved
[    0.424903] system 00:02: [io  0x0c6c] has been reserved
[    0.424905] system 00:02: [io  0x0c6f] has been reserved
[    0.424907] system 00:02: [io  0x0cd0-0x0cd1] has been reserved
[    0.424910] system 00:02: [io  0x0cd2-0x0cd3] has been reserved
[    0.424912] system 00:02: [io  0x0cd4-0x0cd5] has been reserved
[    0.424914] system 00:02: [io  0x0cd6-0x0cd7] has been reserved
[    0.424916] system 00:02: [io  0x0cd8-0x0cdf] has been reserved
[    0.424918] system 00:02: [io  0x0800-0x089f] has been reserved
[    0.424920] system 00:02: [io  0x0b20-0x0b3f] has been reserved
[    0.424923] system 00:02: [io  0x0900-0x090f] has been reserved
[    0.424925] system 00:02: [io  0x0910-0x091f] has been reserved
[    0.424927] system 00:02: [io  0xfe00-0xfefe] has been reserved
[    0.424930] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.424933] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.424936] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.424938] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.424941] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.424943] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.424946] system 00:02: [mem 0xff010000-0xffffffff] has been reserved
[    0.424949] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.424964] pnp 00:03: [dma 4]
[    0.424967] pnp 00:03: [io  0x0000-0x000f]
[    0.424969] pnp 00:03: [io  0x0081-0x0083]
[    0.424970] pnp 00:03: [io  0x0087]
[    0.424972] pnp 00:03: [io  0x0089-0x008b]
[    0.424974] pnp 00:03: [io  0x008f]
[    0.424976] pnp 00:03: [io  0x00c0-0x00df]
[    0.425003] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.425014] pnp 00:04: [io  0x0070-0x0071]
[    0.425025] pnp 00:04: [irq 8]
[    0.425054] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.425063] pnp 00:05: [io  0x0061]
[    0.425088] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.425120] pnp 00:06: [io  0x0010-0x001f]
[    0.425122] pnp 00:06: [io  0x0022-0x003f]
[    0.425124] pnp 00:06: [io  0x0044-0x005f]
[    0.425126] pnp 00:06: [io  0x0072-0x007f]
[    0.425127] pnp 00:06: [io  0x0080]
[    0.425129] pnp 00:06: [io  0x0084-0x0086]
[    0.425131] pnp 00:06: [io  0x0088]
[    0.425132] pnp 00:06: [io  0x008c-0x008e]
[    0.425134] pnp 00:06: [io  0x0090-0x009f]
[    0.425135] pnp 00:06: [io  0x00a2-0x00bf]
[    0.425137] pnp 00:06: [io  0x00e0-0x00ef]
[    0.425139] pnp 00:06: [io  0x04d0-0x04d1]
[    0.425188] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.425191] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.425200] pnp 00:07: [io  0x00f0-0x00ff]
[    0.425205] pnp 00:07: [irq 13]
[    0.425231] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.425288] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.443157] pnp 00:09: [irq 12]
[    0.443218] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.443236] pnp 00:0a: [io  0x0060]
[    0.443238] pnp 00:0a: [io  0x0064]
[    0.443242] pnp 00:0a: [irq 1]
[    0.443273] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.443353] pnp 00:0b: [mem 0x77000000-0x7effffff]
[    0.443414] system 00:0b: [mem 0x77000000-0x7effffff] could not be reserved
[    0.443418] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.443713] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[    0.443758] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.443764] pnp: PnP ACPI: found 13 devices
[    0.443765] ACPI: ACPI bus type pnp unregistered
[    0.451187] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 400000
[    0.451201] pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[    0.451206] pci 0000:00:04.0: BAR 14: assigned [mem 0x7f000000-0x7f3fffff]
[    0.451210] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.451213] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.451217] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.451220] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.451224] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.451227] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.451230] pci 0000:00:04.0:   bridge window [mem 0x7f000000-0x7f3fffff]
[    0.451233] pci 0000:00:04.0:   bridge window [mem 0xd8000000-0xd80fffff 64bit pref]
[    0.451237] pci 0000:00:05.0: PCI bridge to [bus 03-0b]
[    0.451241] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.451246] pci 0000:00:14.4: PCI bridge to [bus 0c-12]
[    0.451287] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.451289] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.451292] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    0.451294] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    0.451296] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.451298] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    0.451300] pci_bus 0000:00: resource 10 [mem 0x7f000000-0xffffffff]
[    0.451302] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.451304] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.451306] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.451308] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.451310] pci_bus 0000:02: resource 1 [mem 0x7f000000-0x7f3fffff]
[    0.451312] pci_bus 0000:02: resource 2 [mem 0xd8000000-0xd80fffff 64bit pref]
[    0.451314] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.451316] pci_bus 0000:0c: resource 4 [io  0x0000-0x03af]
[    0.451318] pci_bus 0000:0c: resource 5 [io  0x03e0-0x0cf7]
[    0.451320] pci_bus 0000:0c: resource 6 [io  0x03b0-0x03df]
[    0.451322] pci_bus 0000:0c: resource 7 [io  0x0d00-0xffff]
[    0.451324] pci_bus 0000:0c: resource 8 [mem 0x000a0000-0x000bffff]
[    0.451325] pci_bus 0000:0c: resource 9 [mem 0x000c0000-0x000dffff]
[    0.451327] pci_bus 0000:0c: resource 10 [mem 0x7f000000-0xffffffff]
[    0.451362] NET: Registered protocol family 2
[    0.451837] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.452998] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.453296] TCP: Hash tables configured (established 262144 bind 65536)
[    0.453335] TCP: reno registered
[    0.453347] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.453361] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.453447] NET: Registered protocol family 1
[    0.453463] pci 0000:00:01.0: Boot video device
[    0.453582] PCI: CLS 64 bytes, default 64
[    0.453640] Unpacking initramfs...
[    0.510882] Freeing initrd memory: 2816k freed
[    0.512203] LVT offset 0 assigned for vector 0x400
[    0.512237] perf: AMD IBS detected (0x000000ff)
[    0.512455] audit: initializing netlink socket (disabled)
[    0.512468] type=2000 audit(1355723449.406:1): initialized
[    0.525122] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.527134] VFS: Disk quotas dquot_6.5.2
[    0.527183] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.527418] msgmni has been set to 3688
[    0.527683] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.527727] io scheduler noop registered
[    0.527729] io scheduler deadline registered
[    0.527791] io scheduler cfq registered (default)
[    0.527915] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    0.527996] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
[    0.528143] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[    0.528145] vesafb: scrolling: redraw
[    0.528147] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.528468] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010900000, using 4224k, total 4224k
[    0.542055] Console: switching to colour frame buffer device 170x48
[    0.555439] fb0: VESA VGA frame buffer device
[    0.555473] GHES: HEST is not enabled!
[    0.555630] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.556118] Linux agpgart interface v0.103
[    0.556180] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.572246] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.572275] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.572411] mousedev: PS/2 mouse device common for all mice
[    0.572769] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.572792] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.572801] cpuidle: using governor ladder
[    0.572803] cpuidle: using governor menu
[    0.572926] drop_monitor: Initializing network drop monitor service
[    0.573009] TCP: cubic registered
[    0.573123] NET: Registered protocol family 10
[    0.573280] NET: Registered protocol family 17
[    0.573294] Key type dns_resolver registered
[    0.573783] PM: Hibernation image not present or could not be loaded.
[    0.573792] registered taskstats version 1
[    0.574332] rtc_cmos 00:04: setting system clock to 2012-12-17 05:50:50 UTC (1355723450)
[    0.576830] Freeing unused kernel memory: 772k freed
[    0.577048] Write protecting the kernel read-only data: 8192k
[    0.583860] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.586429] Freeing unused kernel memory: 1404k freed
[    0.589845] Freeing unused kernel memory: 568k freed
[    0.600025] systemd-udevd[55]: starting version 196
[    0.627082] ACPI: bus type usb registered
[    0.627127] usbcore: registered new interface driver usbfs
[    0.627141] usbcore: registered new interface driver hub
[    0.627200] usbcore: registered new device driver usb
[    0.627833] SCSI subsystem initialized
[    0.628381] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.628445] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    0.628455] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    0.628475] QUIRK: Enable AMD PLL fix
[    0.628478] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    0.628511] ehci_hcd 0000:00:12.2: debug port 1
[    0.628543] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4a000
[    0.629827] ACPI: bus type scsi registered
[    0.629977] libata version 3.00 loaded.
[    0.636326] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    0.636606] hub 1-0:1.0: USB hub found
[    0.636612] hub 1-0:1.0: 5 ports detected
[    0.637013] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.637053] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    0.637061] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
[    0.637088] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4b000
[    0.693954] hub 2-0:1.0: USB hub found
[    0.693963] hub 2-0:1.0: 5 ports detected
[    0.694080] ahci 0000:00:11.0: version 3.0
[    0.694154] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
[    0.694243] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 3 Gbps 0xb impl SATA mode
[    0.694248] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
[    0.695108] scsi0 : ahci
[    0.695213] scsi1 : ahci
[    0.695295] scsi2 : ahci
[    0.695378] scsi3 : ahci
[    0.695436] ata1: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c100 irq 42
[    0.695439] ata2: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c180 irq 42
[    0.695441] ata3: DUMMY
[    0.695443] ata4: SATA max UDMA/133 abar m2048@0xfeb4c000 port 0xfeb4c280 irq 42
[    0.695479] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    0.695489] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[    0.695686] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb48000
[    0.695739] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[    0.695745] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[    0.695751] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
[    0.695757] xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
[    0.695762] xhci_hcd 0000:00:10.0: irq 47 for MSI/MSI-X
[    0.695992] xHCI xhci_add_endpoint called for root hub
[    0.695994] xHCI xhci_check_bandwidth called for root hub
[    0.696035] hub 3-0:1.0: USB hub found
[    0.696042] hub 3-0:1.0: 2 ports detected
[    0.696115] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    0.696119] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[    0.699282] xHCI xhci_add_endpoint called for root hub
[    0.699283] xHCI xhci_check_bandwidth called for root hub
[    0.699310] hub 4-0:1.0: USB hub found
[    0.699317] hub 4-0:1.0: 2 ports detected
[    0.943063] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[    1.013112] ata4: SATA link down (SStatus 0 SControl 300)
[    1.179709] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.179751] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.183676] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/133
[    1.183684] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.185121] ata2.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SC00, max UDMA/100
[    1.185658] ata1.00: configured for UDMA/133
[    1.185826] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
[    1.189681] ata2.00: configured for UDMA/100
[    1.202939] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208BB  SC00 PQ: 0 ANSI: 5
[    1.207231] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    1.207236] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.207289] sd 0:0:0:0: [sda] Write Protect is off
[    1.207293] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.207315] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.250181]  sda: sda1 sda2 sda3 sda4
[    1.250693] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.267597] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.267602] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.267890] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.279691] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[    1.513040] tsc: Refined TSC clocksource calibration: 2295.824 MHz
[    1.513055] Switching to clocksource tsc
[    1.672945] usb 2-4: new full-speed USB device number 2 using ohci_hcd
[    1.943639] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    2.569483] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[    2.580298] systemd[1]: Set hostname to <yuriy-laptop>.
[    3.065928] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[    3.066183] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.066238] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.066250] systemd[1]: Starting Remote File Systems.
[    3.066263] systemd[1]: Reached target Remote File Systems.
[    3.066272] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[    3.066284] systemd[1]: Starting Delayed Shutdown Socket.
[    3.066312] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.066321] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.066343] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.066352] systemd[1]: Starting Encrypted Volumes.
[    3.066362] systemd[1]: Reached target Encrypted Volumes.
[    3.066422] systemd[1]: Starting udev Kernel Socket.
[    3.066444] systemd[1]: Listening on udev Kernel Socket.
[    3.066489] systemd[1]: Starting udev Control Socket.
[    3.066513] systemd[1]: Listening on udev Control Socket.
[    3.066547] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    3.066649] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.066663] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    3.066698] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.066706] systemd[1]: Expecting device dev-sda2.device...
[    3.066718] systemd[1]: Expecting device dev-sda3.device...
[    3.066728] systemd[1]: Expecting device dev-sda1.device...
[    3.066739] systemd[1]: Starting Journal Socket.
[    3.066789] systemd[1]: Listening on Journal Socket.
[    3.066799] systemd[1]: Mounting Temporary Directory...
[    3.103035] systemd[1]: Started File System Check on Root Device.
[    3.103066] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.151793] systemd[1]: Started Load Kernel Modules.
[    3.151820] systemd[1]: Mounted FUSE Control File System.
[    3.151833] systemd[1]: Starting Setup Virtual Console...
[    3.162564] systemd[1]: Mounted Configuration File System.
[    3.162590] systemd[1]: Mounting Debug File System...
[    3.181524] systemd[1]: Mounting POSIX Message Queue File System...
[    3.201314] systemd[1]: Starting udev Kernel Device Manager...
[    3.207334] systemd[1]: Starting udev Coldplug all Devices...
[    3.273254] systemd[1]: Starting Apply Kernel Variables...
[    3.307498] systemd[1]: Started Set Up Additional Binary Formats.
[    3.307617] systemd[1]: Mounting Huge Pages File System...
[    3.316569] systemd[1]: Starting Journal Service...
[    3.323392] systemd[1]: Started Journal Service.
[    3.368044] systemd-udevd[119]: starting version 196
[    3.829410] EXT4-fs (sda4): re-mounted. Opts: (null)
[    4.415075] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    4.415091] ACPI: Power Button [PWRB]
[    4.425955] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    4.436321] ACPI: Lid Switch [LID]
[    4.436570] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.436585] ACPI: Power Button [PWRF]
[    4.444687] microcode: CPU0: patch_level=0x0600110f
[    4.448080] thermal LNXTHERM:00: registered as thermal_zone0
[    4.448088] ACPI: Thermal Zone [TZ00] (62 C)
[    4.466478] ACPI: AC Adapter [ACAD] (on-line)
[    4.473366] acpi device:26: registered as cooling_device0
[    4.477820] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    4.477998] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input4
[    4.566071] ACPI: acpi_idle registered with cpuidle
[    4.642950] [Firmware Bug]: battery: (dis)charge rate invalid.
[    4.643062] ACPI: Battery Slot [BAT1] (battery present)
[    4.661115] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    4.664201] samsung_laptop: detected SABI interface: SwSmi@
[    4.664207] samsung_laptop: Backlight controlled by ACPI video driver
[    4.694555] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    4.791067] cfg80211: Calling CRDA to update world regulatory domain
[    4.886430] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[    4.886587] microcode: CPU1: patch_level=0x0600110f
[    4.886923] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[    4.887077] microcode: CPU2: patch_level=0x0600110f
[    4.887373] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[    4.887531] microcode: CPU3: patch_level=0x0600110f
[    4.887766] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[    4.887959] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.949286] hda-intel: Force to non-snoop mode
[    4.949336] snd_hda_intel 0000:00:01.1: irq 48 for MSI/MSI-X
[    5.137059] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.137275] r8169 0000:02:00.0: irq 49 for MSI/MSI-X
[    5.137467] r8169 0000:02:00.0: eth0: RTL8168f/8111f at 0xffffc90000326000, b8:88:e3:60:0c:a7, XID 08000800 IRQ 49
[    5.137470] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    5.163115] ath: phy0: ASPM enabled: 0x42
[    5.163121] ath: EEPROM regdomain: 0x65
[    5.163122] ath: EEPROM indicates we should expect a direct regpair map
[    5.163126] ath: Country alpha2 being used: 00
[    5.163127] ath: Regpair used: 0x65
[    5.207249] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[    5.211222] scsi4 : SCSI emulation for RTS5139 USB card reader
[    5.211430] scsi 4:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
[    5.215168] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.218369] usbcore: registered new interface driver rts5139
[    5.331457] Linux media interface: v0.10
[    5.367503] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    5.367731] Registered led device: ath9k-phy0
[    5.367738] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90010e00000, irq=17
[    5.377769] Bluetooth: Core ver 2.16
[    5.377796] NET: Registered protocol family 31
[    5.377798] Bluetooth: HCI device and connection manager initialized
[    5.377800] Bluetooth: HCI socket layer initialized
[    5.377802] Bluetooth: L2CAP socket layer initialized
[    5.377808] Bluetooth: SCO socket layer initialized
[    5.381061] Linux video capture interface: v2.00
[    5.415688] usbcore: registered new interface driver btusb
[    5.457102] uvcvideo: Found UVC 1.00 device WebCam SC-03FFL11739P (0ac8:c349)
[    5.459404] input: WebCam SC-03FFL11739P as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input6
[    5.459582] usbcore: registered new interface driver uvcvideo
[    5.459584] USB Video Class driver (1.1.1)
[    5.622781] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
[    5.728628] usb 2-4: USB disconnect, device number 2
[    5.729583] usbcore: registered new interface driver ath3k
[    5.931233] kvm: Nested Virtualization enabled
[    5.931238] kvm: Nested Paging enabled
[    5.955358] powernow-k8: Found 1 AMD A10-4600M APU with Radeon(tm) HD Graphics   (4 cpu cores) (version 2.20.00)
[    5.955375] powernow-k8: Core Performance Boosting: on.
[    5.955442] powernow-k8:    0 : pstate 0 (2300 MHz)
[    5.955443] powernow-k8:    1 : pstate 1 (2000 MHz)
[    5.955445] powernow-k8:    2 : pstate 2 (1800 MHz)
[    5.955446] powernow-k8:    3 : pstate 3 (1600 MHz)
[    5.955447] powernow-k8:    4 : pstate 4 (1400 MHz)
[    5.967938] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
[    5.975508] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[    5.975885] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[    6.009313] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xf00233/0x240000/0xa2400, board id: 1871, fw id: 1128454
[    6.070499] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[    6.118919] Adding 4883756k swap on /dev/sda2.  Priority:-1 extents:1 across:4883756k 
[    6.206190] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.206203] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.206211] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.207037] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.207047] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.207055] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.207114] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.207121] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.207128] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.207161] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.207167] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.207174] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.207301] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.207312] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.207321] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.207355] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.207360] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.207368] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.207403] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.207408] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.207417] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.208325] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.208335] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.208343] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.208367] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.209654] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.222981] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.223128] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.223153] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.224031] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.224252] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.224263] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.224317] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.224324] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.224334] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.224368] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.224373] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.224380] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.224455] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.224464] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.224474] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.225928] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.226019] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.226029] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.226069] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.226075] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.226081] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.226114] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.226120] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.226128] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.226159] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.226166] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.226173] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.226211] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.226218] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.226229] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.226268] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.226274] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.226284] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.226304] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.226533] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.228056] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.228065] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.228073] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.236212] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.236242] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.236251] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.236258] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.236296] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.236300] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.236305] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.236331] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.236352] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.236471] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.236523] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.237113] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.237282] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.237823] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20120711/dsfield-211)
[    6.237833] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD.AHKS] (Node ffff880072ac4320), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.237843] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SBRG.ACAD._PSR] (Node ffff880072ac2de8), AE_ALREADY_EXISTS (20120711/psparse-536)
[    6.238959] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.239003] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.239188] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.240830] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20120711/ac-122)
[    6.252891] ACPI: Marking method AHKS as Serialized because of AE_ALREADY_EXISTS error
[    6.252900] ACPI: Marking method _PSR as Serialized because of AE_ALREADY_EXISTS error
[    6.828101] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[    6.875270] EXT4-fs (sda1): mounted filesystem without journal. Opts: stripe=4
[    6.894680] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    7.023412] systemd-journald[123]: Received SIGUSR1
[    7.538792] r8169 0000:02:00.0: eth0: link down
[    7.538842] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.437497] systemd-logind[757]: Watching system buttons on /dev/input/event3 (Power Button)
[    8.437662] systemd-logind[757]: Watching system buttons on /dev/input/event4 (Video Bus)
[    8.437813] systemd-logind[757]: Watching system buttons on /dev/input/event1 (Power Button)
[    8.437958] systemd-logind[757]: Watching system buttons on /dev/input/event2 (Lid Switch)
[   25.318255] usb 2-4: new full-speed USB device number 3 using ohci_hcd
[   25.457589] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   26.409117] wlan0: authenticate with f4:71:68:75:1a:82
[   26.416963] wlan0: send auth to f4:71:68:75:1a:82 (try 1/3)
[   26.418947] wlan0: authenticated
[   26.424725] wlan0: associate with f4:71:68:75:1a:82 (try 1/3)
[   26.427507] wlan0: RX AssocResp from f4:71:68:75:1a:82 (capab=0x21 status=0 aid=5)
[   26.427596] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   26.427740] wlan0: associated
[   51.150964] EXT4-fs (sda4): re-mounted. Opts: data=ordered,commit=600
[   51.248527] EXT4-fs (sda1): re-mounted. Opts: stripe=4
[   51.594328] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=600
[   60.414242] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[   60.660798] EXT4-fs (sda4): re-mounted. Opts: data=ordered,commit=0
[   60.751146] EXT4-fs (sda1): re-mounted. Opts: stripe=4
[   60.868213] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=0
[  127.471176] cfg80211: Calling CRDA for country: GB
[  134.415519] wlan0: authenticate with f4:71:68:75:1a:82
[  134.423747] wlan0: send auth to f4:71:68:75:1a:82 (try 1/3)
[  134.425810] wlan0: authenticated
[  134.431448] wlan0: associate with f4:71:68:75:1a:82 (try 1/3)
[  134.435422] wlan0: RX AssocResp from f4:71:68:75:1a:82 (capab=0x21 status=0 aid=5)
[  134.435522] wlan0: associated
[  167.260048] cfg80211: Calling CRDA to update world regulatory domain
[  168.583448] wlan0: authenticate with f4:71:68:75:1a:82
[  168.591708] wlan0: send auth to f4:71:68:75:1a:82 (try 1/3)
[  168.593789] wlan0: authenticated
[  168.599325] wlan0: associate with f4:71:68:75:1a:82 (try 1/3)
[  168.802646] wlan0: associate with f4:71:68:75:1a:82 (try 2/3)
[  168.807366] wlan0: RX AssocResp from f4:71:68:75:1a:82 (capab=0x21 status=0 aid=1)
[  168.807424] wlan0: associated

modprobe -c
oh... it's too large...

One thing - it's pretty works on Linux Mint. So... It should work.

P.S. Sorry for bad English.

Offline

#2 2012-12-21 20:11:28

westmn
Member
Registered: 2012-12-21
Posts: 4

Re: acpi on Samsung 355V4C | brightness

are there any other directories in /sys/class/backlight, aside from acpi_video0?

Offline

Board footer

Powered by FluxBB