You are not logged in.

#1 2012-12-24 15:03:17

blackbee
Member
Registered: 2012-06-09
Posts: 6

Nouveau: problem with the resolution

Hello!

I need a help to set the correct display resolution. By default it sets to 1024x768 and I managed to change it to 1280x1024, but now the screen is prity much ugly. This is how it looks like:
Screenshot_from_2012_12_24_16_18_19.jpg

The nouveau driver is installed and loaded:

$ pacman -Q | grep nouveau
nouveau-dri 9.0.1-1
xf86-video-nouveau 1.0.4-1
$ lsmod | grep nouveau
nouveau               873899  3 
mxm_wmi                 1468  1 nouveau
video                  11277  1 nouveau
ttm                    64385  1 nouveau
drm_kms_helper         32878  1 nouveau
drm                   218903  5 ttm,drm_kms_helper,nouveau
i2c_algo_bit            5392  1 nouveau
i2c_core               20708  6 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,nouveau,videodev
wmi                     8380  2 mxm_wmi,nouveau
button                  4663  1 nouveau

The current DPI and resolusion is ok:

$ xdpyinfo | grep resolution
  resolution:    96x96 dots per inch

$ xdpyinfo | grep dimensions
  dimensions:    1280x1024 pixels (338x270 millimeters)

This is the 20-nouveau.conf:

Section "Monitor"
    Identifier        "Monitor0"
    Modeline          "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
    Option            "PreferredMode" "1280x1024_60.00"
EndSection

Section "Device"
    Identifier        "Device0"
    Driver            "nouveau"
    Option            "GLXVBlank" "true"
EndSection

Section "Screen"
    Identifier        "Screen0"
    Device            "Device0"
    Monitor           "Monitor0"
    DefaultDepth      24
    SubSection "Display"
        Depth         24
        Modes         "1280x1024"     #same with 1280x1024_60.00
    EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Screen0"
EndSection

I don't want to use the nvidia drivers because I have performance issues in Gnome.

Offline

#2 2012-12-24 16:13:40

Trilby
Inspector Parrot
Registered: 2011-11-29
Posts: 30,554
Website

Re: Nouveau: problem with the resolution

That screenshot looks fine to me.  What is the problem?


"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman

Offline

#3 2012-12-24 17:20:39

blackbee
Member
Registered: 2012-06-09
Posts: 6

Re: Nouveau: problem with the resolution

Well... I see, it is ok when I open the screenshot in Windows, but in Arch the whole desktop is blurry. I don't know how to show you that. Every screenshot tool that I tried saves the image correctly, much sharper than it really is.

Offline

#4 2012-12-25 11:13:51

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 15,577

Re: Nouveau: problem with the resolution

You could try taking a picture of the screen with a camera.

As to the resolution porblem :
If things are setup correctly, linux uses the EDID information supplied by the screen to determine which resolutions are available.

Are you SURE your screen supports 1280x1024 ?

Check for remnants of nivida drivers, if there are any those can screw up autodetection also.


Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#5 2012-12-25 12:41:24

SoleSoul
Member
From: Israel
Registered: 2009-06-29
Posts: 319

Re: Nouveau: problem with the resolution

If your screen is connected using a vga cable (analog) you can try pressing the autoadjust button of the screen if you didn't try it yet.
And just to be sure, you have nothing that prevents KMS (Kernel Mode Setting) in the boot loader config, right?

Offline

#6 2012-12-25 14:03:16

blackbee
Member
Registered: 2012-06-09
Posts: 6

Re: Nouveau: problem with the resolution

My screen is connected using DVI cable. It's a 19" SyncMaster 961BF monitor that supports 1280x1024. Windows shows that it's native resolution is 1024x768 and that is also the first line in xrandr. The picture is better in 1280x1024 (except in Arch using nouveau), and I use it for years.
I have just turned on my secondary display and the picture is not blurry there. With nvidia driver the picture is ok on both screen, but as I said the performance is worse.

$ xrandr
Screen 0: minimum 320 x 200, current 3200 x 1080, maximum 8192 x 8192
DVI-I-1 connected 1280x1024+0+56 (normal left inverted right x axis y axis) 338mm x 270mm
   1024x768       60.0 +   75.1     70.1  
   1280x1024      75.0     60.0* 
   1280x960       60.0  
   1280x800       74.9     59.9  
   1152x864       75.0  
   1280x768       74.9     60.0  
   1024x576       60.0  
   832x624        74.6  
   800x600        72.2     75.0     60.3     56.2  
   848x480        60.0  
   640x480        72.8     75.0     66.7     60.0  
   720x400        70.1  
DVI-I-2 connected 1920x1080+1280+0 (normal left inverted right x axis y axis) 160mm x 90mm
   1920x1080      60.0*+   50.0     30.0     25.0     24.0     25.0     30.0  
   1680x1050      59.9  
   1680x945       60.0  
   1400x1050      59.9  
   1600x900       60.0  
   1280x1024      75.0     60.0  
   1440x900       75.0     59.9  
   1280x960       60.0  
   1366x768       60.0  
   1360x768       60.0  
   1280x800       74.9     59.9  
   1152x864       75.0  
   1280x768       74.9     60.0  
   1280x720       50.0     60.0  
   1024x768       75.1     70.1     60.0  
   1024x576       60.0  
   832x624        74.6  
   800x600        72.2     75.0     60.3     56.2  
   720x576        50.0  
   848x480        60.0  
   720x480        59.9  
   640x480        72.8     75.0     66.7     60.0  
   720x400        70.1  
HDMI-1 disconnected (normal left inverted right x axis y axis)

Offline

#7 2012-12-25 17:30:49

AaronBP
Member
Registered: 2012-08-06
Posts: 150

Re: Nouveau: problem with the resolution

I have a similar problem. I use a script like this at startup:

#!/bin/sh

xrandr --newmode 1280x1024 138.75  1280 1368 1504 1728  1024 1027 1034 1072 -hsync +vsync

xrandr --addmode VGA-2 1280x1024

xrandr -s 1280x1024
sleep 2
xrandr -s 1024x768
sleep 2
xrandr -s 1280x1024

Sucks, but it seems that setting the screen to 1024 and back to 1280 fixes the problem for me. Probably your monitor is either giving you no EDID or giving you one that is invalid. I think monitors just wig out sometimes.

Oh! Also make sure your modeline is correct. Did you generate it with the cvt program? You sure the refresh rate you used is correct?

Offline

#8 2012-12-25 21:13:35

blackbee
Member
Registered: 2012-06-09
Posts: 6

Re: Nouveau: problem with the resolution

yes I get the modlines from cvt 1280 1024 60.
I tried this script but it doesn't help. I needed to modify it, otherwise I get errors.

#!/bin/sh

xrandr --newmode 1280x1024-new 109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync 

xrandr --addmode DVI-I-1 1280x1024-new

xrandr -s 1280x1024-new
sleep 2
xrandr -s 1024x768
sleep 2
xrandr -s 1280x1024-new

This adds a new line to the bottom of the xrandr for the selected output:

DVI-I-1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 338mm x 270mm
   1024x768       60.0 +   75.1     70.1  
   1280x1024      75.0*    60.0  
   1280x960       60.0  
   1280x800       74.9     59.9  
   1152x864       75.0  
   1280x768       74.9     60.0  
   1024x576       60.0  
   832x624        74.6  
   800x600        72.2     75.0     60.3     56.2  
   848x480        60.0  
   640x480        72.8     75.0     66.7     60.0  
   720x400        70.1  
   1280x1024-new   59.9

Offline

#9 2012-12-26 23:24:27

Lone_Wolf
Administrator
From: Netherlands, Europe
Registered: 2005-10-04
Posts: 15,577

Re: Nouveau: problem with the resolution

the last output of xrandr seems to use the 1280x1025 75 HZ mode , NOT the 60/59.9 HZ mode.
If the output is sharp with that mode, i suggest to calculate a modeline for 1280x1024 at 75 Hz.


Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.

clean chroot building not flexible enough ?
Try clean chroot manager by graysky

Offline

#10 2012-12-27 10:09:10

blackbee
Member
Registered: 2012-06-09
Posts: 6

Re: Nouveau: problem with the resolution

It's the same with 75Hz. I think I'll go back to the nvidia drivers and change the desktop environment.

Offline

Board footer

Powered by FluxBB