I have a completely new issue with one of my hard drives.
The device is visible from lsusb, and everything seems fine when I do an udevadm monitor.
There's no log at all in /etc/log/syslog.log (from what I've googled, I suppose there should be something).
Here's the kernel's output:
[259537.108688] usb 2-1.3: USB disconnect, device number 16 [259540.621170] usb 2-1.3: new high-speed USB device number 17 using ehci_hcd
Bus 002 Device 017: ID 03f0:bb07 Hewlett-Packard
monitor will print the received events for: UDEV - the event which udev sends out after rule processing KERNEL - the kernel uevent KERNEL[259673.736202] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3 (usb) KERNEL[259673.737600] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0 (usb) UDEV [259673.758811] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3 (usb) UDEV [259673.759975] add /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0 (usb)
Despite all these datas, there's nothing in /dev/disk apart from my own hard drive.
And fdisk -l doesn't list the USB hard drive.
Sooo... any other commands I could try to find what might be going wrong ?
Could it be ?
I got the same issue.
uname -r - 3.7.1-2-ARCH
pacman -Q linux - linux 3.7.1-2
Reboot didn't help. Any ideas??
In what sense is it the same issue? The OP's problem was that the installed modules didn't match the currently running kernel. You should start a new thread describing your symptoms in detail.