You are not logged in.
Pages: 1
Okay so I have an M11x R3 laptop running Arch x86_64. I have an issue I just got a Displayport to DVI and Displayport to VGA adapters. I have tried HDMI but it doesn't show up with xrandr -q command. I was wondering what I should do because it shows my VGA1 disconnected even when the DisplayPort adapter is connected to the monitor and to the laptop?
xrandr -q output:
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm
1366x768 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)Now I try to run this to get the display extended to a secondary monitor. Nothing happens!
xrandr --output VGA1 --auto --left-of LVDS1sudo lspci -v
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04c8
Flags: bus master, fast devsel, latency 0, IRQ 51
Memory at d1400000 (64-bit, non-prefetchable) [size=4M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 7000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
Kernel driver in use: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Device 04c8
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
Memory at b0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 6000 [size=128]
Expansion ROM at d1000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nvidiaNow under /etc/X11/xorg.conf.d/ I don't have a specific xorg.conf file for then Intel card that runs on the i915 driver. Should I make one that can help with the detection of the displayport?
here is my /etc/bumblebee/xorg.nvidia.conf
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "ConnectedMonitor" "DFP"
EndSectionLast but not least here is my /var/log/Xorg.1.log
[ 3822.058]
X.Org X Server 1.13.2
Release Date: 2013-01-24
[ 3822.058] X Protocol Version 11, Revision 0
[ 3822.058] Build Operating System: Linux 3.7.4-1-ARCH x86_64
[ 3822.058] Current Operating System: Linux tux_laptop 3.7.4-1-ARCH #1 SMP PREEMPT Mon Jan 21 23:05:29 CET 2013 x86_64
[ 3822.058] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ac0ab469-8109-477b-a746-13d28a8fe11b ro quiet
[ 3822.058] Build Date: 25 January 2013 09:33:50AM
[ 3822.058]
[ 3822.058] Current version of pixman: 0.28.2
[ 3822.058] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3822.058] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3822.058] (==) Log file: "/var/log/Xorg.1.log", Time: Sun Jan 27 21:12:19 2013
[ 3822.058] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3822.059] (==) No Layout section. Using the first Screen section.
[ 3822.059] (==) No screen section available. Using defaults.
[ 3822.059] (**) |-->Screen "Default Screen Section" (0)
[ 3822.059] (**) | |-->Monitor "<default monitor>"
[ 3822.059] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3822.059] (==) Automatically adding devices
[ 3822.059] (==) Automatically enabling devices
[ 3822.059] (==) Automatically adding GPU devices
[ 3822.059] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 3822.059] Entry deleted from font path.
[ 3822.059] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 3822.059] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 3822.059] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3822.059] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3822.059] (II) Loader magic: 0x7fcc40
[ 3822.059] (II) Module ABI versions:
[ 3822.059] X.Org ANSI C Emulation: 0.4
[ 3822.059] X.Org Video Driver: 13.1
[ 3822.059] X.Org XInput driver : 18.0
[ 3822.059] X.Org Server Extension : 7.0
[ 3822.059] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3822.061] (--) PCI:*(0:0:2:0) 8086:0116:1028:04c8 rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00007000/64
[ 3822.061] (--) PCI: (0:1:0:0) 10de:0df4:1028:04c8 rev 161, Mem @ 0xd0000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00006000/128, BIOS @ 0x????????/524288
[ 3822.061] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3822.061] Initializing built-in extension Generic Event Extension
[ 3822.061] Initializing built-in extension SHAPE
[ 3822.061] Initializing built-in extension MIT-SHM
[ 3822.061] Initializing built-in extension XInputExtension
[ 3822.061] Initializing built-in extension XTEST
[ 3822.061] Initializing built-in extension BIG-REQUESTS
[ 3822.061] Initializing built-in extension SYNC
[ 3822.061] Initializing built-in extension XKEYBOARD
[ 3822.061] Initializing built-in extension XC-MISC
[ 3822.061] Initializing built-in extension SECURITY
[ 3822.061] Initializing built-in extension XINERAMA
[ 3822.061] Initializing built-in extension XFIXES
[ 3822.061] Initializing built-in extension RENDER
[ 3822.061] Initializing built-in extension RANDR
[ 3822.061] Initializing built-in extension COMPOSITE
[ 3822.061] Initializing built-in extension DAMAGE
[ 3822.061] Initializing built-in extension MIT-SCREEN-SAVER
[ 3822.061] Initializing built-in extension DOUBLE-BUFFER
[ 3822.061] Initializing built-in extension RECORD
[ 3822.061] Initializing built-in extension DPMS
[ 3822.061] Initializing built-in extension X-Resource
[ 3822.061] Initializing built-in extension XVideo
[ 3822.061] Initializing built-in extension XVideo-MotionCompensation
[ 3822.062] Initializing built-in extension XFree86-VidModeExtension
[ 3822.062] Initializing built-in extension XFree86-DGA
[ 3822.062] Initializing built-in extension XFree86-DRI
[ 3822.062] Initializing built-in extension DRI2
[ 3822.062] (II) LoadModule: "glx"
[ 3822.062] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3822.062] (II) Module glx: vendor="X.Org Foundation"
[ 3822.062] compiled for 1.13.2, module version = 1.0.0
[ 3822.062] ABI class: X.Org Server Extension, version 7.0
[ 3822.062] (==) AIGLX enabled
[ 3822.062] Loading extension GLX
[ 3822.062] (==) Matched intel as autoconfigured driver 0
[ 3822.062] (==) Matched intel as autoconfigured driver 1
[ 3822.062] (==) Matched vesa as autoconfigured driver 2
[ 3822.062] (==) Matched modesetting as autoconfigured driver 3
[ 3822.062] (==) Matched fbdev as autoconfigured driver 4
[ 3822.063] (==) Assigned the driver to the xf86ConfigLayout
[ 3822.063] (II) LoadModule: "intel"
[ 3822.063] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3822.064] (II) Module intel: vendor="X.Org Foundation"
[ 3822.064] compiled for 1.13.1, module version = 2.20.19
[ 3822.064] Module class: X.Org Video Driver
[ 3822.064] ABI class: X.Org Video Driver, version 13.1
[ 3822.064] (II) LoadModule: "vesa"
[ 3822.064] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 3822.064] (II) Module vesa: vendor="X.Org Foundation"
[ 3822.064] compiled for 1.13.0, module version = 2.3.2
[ 3822.064] Module class: X.Org Video Driver
[ 3822.064] ABI class: X.Org Video Driver, version 13.0
[ 3822.064] (II) LoadModule: "modesetting"
[ 3822.064] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 3822.065] (II) Module modesetting: vendor="X.Org Foundation"
[ 3822.065] compiled for 1.13.1, module version = 0.6.0
[ 3822.065] Module class: X.Org Video Driver
[ 3822.065] ABI class: X.Org Video Driver, version 13.1
[ 3822.065] (II) LoadModule: "fbdev"
[ 3822.065] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 3822.065] (II) Module fbdev: vendor="X.Org Foundation"
[ 3822.065] compiled for 1.13.0, module version = 0.4.3
[ 3822.065] Module class: X.Org Video Driver
[ 3822.065] ABI class: X.Org Video Driver, version 13.0
[ 3822.065] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 3822.066] (II) VESA: driver for VESA chipsets: vesa
[ 3822.066] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 3822.066] (II) FBDEV: driver for framebuffer: fbdev
[ 3822.066] (++) using VT number 1
[ 3822.066] (WW) Falling back to old probe method for vesa
[ 3822.066] (WW) Falling back to old probe method for modesetting
[ 3822.067] (WW) Falling back to old probe method for fbdev
[ 3822.067] (II) Loading sub module "fbdevhw"
[ 3822.067] (II) LoadModule: "fbdevhw"
[ 3822.067] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 3822.067] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 3822.067] compiled for 1.13.2, module version = 0.0.2
[ 3822.067] ABI class: X.Org Video Driver, version 13.1
[ 3822.067] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3822.067] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3822.067] (==) intel(0): RGB weight 888
[ 3822.067] (==) intel(0): Default visual is TrueColor
[ 3822.067] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 3822.067] (**) intel(0): Relaxed fencing enabled
[ 3822.067] (**) intel(0): Wait on SwapBuffers? enabled
[ 3822.067] (**) intel(0): Triple buffering? enabled
[ 3822.067] (**) intel(0): Framebuffer tiled
[ 3822.067] (**) intel(0): Pixmaps tiled
[ 3822.067] (**) intel(0): 3D buffers tiled
[ 3822.067] (**) intel(0): SwapBuffers wait enabled
[ 3822.067] (==) intel(0): video overlay key set to 0x101fe
[ 3822.067] (II) intel(0): Output LVDS1 has no monitor section
[ 3822.067] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 3822.092] (II) intel(0): Output VGA1 has no monitor section
[ 3822.093] (II) intel(0): EDID for output LVDS1
[ 3822.093] (II) intel(0): Manufacturer: AUO Model: 305c Serial#: 0
[ 3822.093] (II) intel(0): Year: 2009 Week: 0
[ 3822.093] (II) intel(0): EDID Version: 1.4
[ 3822.093] (II) intel(0): Digital Display Input
[ 3822.093] (II) intel(0): 6 bits per channel
[ 3822.093] (II) intel(0): Digital interface is undefined
[ 3822.093] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 14
[ 3822.093] (II) intel(0): Gamma: 2.20
[ 3822.093] (II) intel(0): No DPMS capabilities specified
[ 3822.093] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 3822.093] (II) intel(0): First detailed timing is preferred mode
[ 3822.093] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 3822.093] (II) intel(0): redX: 0.584 redY: 0.333 greenX: 0.338 greenY: 0.571
[ 3822.093] (II) intel(0): blueX: 0.158 blueY: 0.133 whiteX: 0.313 whiteY: 0.329
[ 3822.093] (II) intel(0): Manufacturer's mask: 0
[ 3822.093] (II) intel(0): Supported detailed timing:
[ 3822.093] (II) intel(0): clock: 70.0 MHz Image Size: 256 x 144 mm
[ 3822.093] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1470 h_border: 0
[ 3822.093] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0
[ 3822.093] (II) intel(0): Supported detailed timing:
[ 3822.093] (II) intel(0): clock: 70.0 MHz Image Size: 256 x 144 mm
[ 3822.093] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1470 h_border: 0
[ 3822.093] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 793 v_border: 0
[ 3822.093] (II) intel(0): 2VD2KB116XW3
[ 3822.093] (II) intel(0): Unknown vendor-specific block 0
[ 3822.093] (II) intel(0): EDID (in hex):
[ 3822.093] (II) intel(0): 00ffffffffffff0006af5c3000000000
[ 3822.093] (II) intel(0): 00130104901a0e780299859555569228
[ 3822.093] (II) intel(0): 22505400000001010101010101010101
[ 3822.093] (II) intel(0): 010101010101581b5668500019303020
[ 3822.093] (II) intel(0): 360000901000001a581b566850001930
[ 3822.093] (II) intel(0): 3020360000901000001a000000fe0032
[ 3822.093] (II) intel(0): 5644324b804231313658573300000000
[ 3822.093] (II) intel(0): 0000410a960111000002010a202000b6
[ 3822.093] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 3822.093] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 3822.093] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 3822.093] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 3822.093] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 3822.093] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 3822.093] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 3822.093] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 3822.093] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 3822.093] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 3822.093] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 3822.093] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 3822.093] (II) intel(0): Printing probed modes for output LVDS1
[ 3822.093] (II) intel(0): Modeline "1366x768"x60.0 70.00 1366 1414 1446 1470 768 771 777 793 +hsync -vsync (47.6 kHz eP)
[ 3822.093] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 3822.093] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 3822.093] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 3822.093] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 3822.119] (II) intel(0): EDID for output VGA1
[ 3822.119] (II) intel(0): Output LVDS1 connected
[ 3822.119] (II) intel(0): Output VGA1 disconnected
[ 3822.119] (II) intel(0): Using exact sizes for initial modes
[ 3822.119] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 3822.119] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 3822.119] (II) intel(0): Kernel page flipping support detected, enabling
[ 3822.119] (==) intel(0): DPI set to (96, 96)
[ 3822.119] (II) Loading sub module "fb"
[ 3822.119] (II) LoadModule: "fb"
[ 3822.119] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3822.120] (II) Module fb: vendor="X.Org Foundation"
[ 3822.120] compiled for 1.13.2, module version = 1.0.0
[ 3822.120] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3822.120] (II) Loading sub module "dri2"
[ 3822.120] (II) LoadModule: "dri2"
[ 3822.120] (II) Module "dri2" already built-in
[ 3822.120] (II) UnloadModule: "vesa"
[ 3822.120] (II) Unloading vesa
[ 3822.120] (II) UnloadModule: "modesetting"
[ 3822.120] (II) Unloading modesetting
[ 3822.120] (II) UnloadModule: "fbdev"
[ 3822.120] (II) Unloading fbdev
[ 3822.120] (II) UnloadSubModule: "fbdevhw"
[ 3822.120] (II) Unloading fbdevhw
[ 3822.120] (==) Depth 24 pixmap format is 32 bpp
[ 3822.120] (II) intel(0): [DRI2] Setup complete
[ 3822.120] (II) intel(0): [DRI2] DRI driver: i965
[ 3822.120] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 3822.121] (II) UXA(0): Driver registered support for the following operations:
[ 3822.121] (II) solid
[ 3822.121] (II) copy
[ 3822.121] (II) composite (RENDER acceleration)
[ 3822.121] (II) put_image
[ 3822.121] (II) get_image
[ 3822.121] (==) intel(0): Backing store disabled
[ 3822.121] (==) intel(0): Silken mouse enabled
[ 3822.121] (II) intel(0): Initializing HW Cursor
[ 3822.121] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3822.121] (==) intel(0): DPMS enabled
[ 3822.121] (==) intel(0): Intel XvMC decoder enabled
[ 3822.121] (II) intel(0): Set up textured video
[ 3822.121] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 3822.121] (II) intel(0): direct rendering: DRI2 Enabled
[ 3822.121] (==) intel(0): hotplug detection: "enabled"
[ 3822.143] (--) RandR disabled
[ 3822.151] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3822.151] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3822.151] (II) AIGLX: enabled GLX_ARB_create_context
[ 3822.151] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3822.151] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 3822.151] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3822.151] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3822.151] (II) AIGLX: Loaded and initialized i965
[ 3822.151] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3822.151] (II) intel(0): Setting screen physical size to 361 x 203
[ 3822.232] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 3822.233] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3822.233] (II) LoadModule: "evdev"
[ 3822.233] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3822.234] (II) Module evdev: vendor="X.Org Foundation"
[ 3822.234] compiled for 1.13.0, module version = 2.7.3
[ 3822.234] Module class: X.Org XInput Driver
[ 3822.234] ABI class: X.Org XInput driver, version 18.0
[ 3822.234] (II) Using input driver 'evdev' for 'Power Button'
[ 3822.234] (**) Power Button: always reports core events
[ 3822.234] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 3822.234] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3822.234] (--) evdev: Power Button: Found keys
[ 3822.234] (II) evdev: Power Button: Configuring as keyboard
[ 3822.234] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 3822.234] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3822.234] (**) Option "xkb_rules" "evdev"
[ 3822.234] (**) Option "xkb_model" "evdev"
[ 3822.234] (**) Option "xkb_layout" "us"
[ 3822.258] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 3822.258] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3822.258] (II) Using input driver 'evdev' for 'Video Bus'
[ 3822.259] (**) Video Bus: always reports core events
[ 3822.259] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 3822.259] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3822.259] (--) evdev: Video Bus: Found keys
[ 3822.259] (II) evdev: Video Bus: Configuring as keyboard
[ 3822.259] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12/event12"
[ 3822.259] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3822.259] (**) Option "xkb_rules" "evdev"
[ 3822.259] (**) Option "xkb_model" "evdev"
[ 3822.259] (**) Option "xkb_layout" "us"
[ 3822.260] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 3822.260] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3822.260] (II) Using input driver 'evdev' for 'Video Bus'
[ 3822.260] (**) Video Bus: always reports core events
[ 3822.260] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 3822.260] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3822.260] (--) evdev: Video Bus: Found keys
[ 3822.260] (II) evdev: Video Bus: Configuring as keyboard
[ 3822.260] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input11/event11"
[ 3822.260] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 3822.260] (**) Option "xkb_rules" "evdev"
[ 3822.260] (**) Option "xkb_model" "evdev"
[ 3822.260] (**) Option "xkb_layout" "us"
[ 3822.261] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 3822.261] (II) No input driver specified, ignoring this device.
[ 3822.261] (II) This device may have been added with another device file.
[ 3822.262] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3822.262] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 3822.262] (II) No input driver specified, ignoring this device.
[ 3822.262] (II) This device may have been added with another device file.
[ 3822.263] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 3822.263] (II) No input driver specified, ignoring this device.
[ 3822.263] (II) This device may have been added with another device file.
[ 3822.263] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[ 3822.264] (II) No input driver specified, ignoring this device.
[ 3822.264] (II) This device may have been added with another device file.
[ 3822.264] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[ 3822.264] (II) No input driver specified, ignoring this device.
[ 3822.264] (II) This device may have been added with another device file.
[ 3822.265] (II) config/udev: Adding input device Plantronics Plantronics GameCom 780 (/dev/input/event1)
[ 3822.265] (**) Plantronics Plantronics GameCom 780: Applying InputClass "evdev keyboard catchall"
[ 3822.265] (II) Using input driver 'evdev' for 'Plantronics Plantronics GameCom 780'
[ 3822.265] (**) Plantronics Plantronics GameCom 780: always reports core events
[ 3822.265] (**) evdev: Plantronics Plantronics GameCom 780: Device: "/dev/input/event1"
[ 3822.265] (--) evdev: Plantronics Plantronics GameCom 780: Vendor 0x47f Product 0xc010
[ 3822.265] (--) evdev: Plantronics Plantronics GameCom 780: Found keys
[ 3822.265] (II) evdev: Plantronics Plantronics GameCom 780: Configuring as keyboard
[ 3822.265] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.5/0000:19:00.0/usb2/2-2/2-2:1.3/input/input1/event1"
[ 3822.265] (II) XINPUT: Adding extended input device "Plantronics Plantronics GameCom 780" (type: KEYBOARD, id 9)
[ 3822.265] (**) Option "xkb_rules" "evdev"
[ 3822.265] (**) Option "xkb_model" "evdev"
[ 3822.265] (**) Option "xkb_layout" "us"
[ 3822.266] (II) config/udev: Adding input device Microsoft Bluetooth Notebook Mouse 5000 (/dev/input/event14)
[ 3822.266] (**) Microsoft Bluetooth Notebook Mouse 5000: Applying InputClass "evdev pointer catchall"
[ 3822.266] (II) Using input driver 'evdev' for 'Microsoft Bluetooth Notebook Mouse 5000'
[ 3822.266] (**) Microsoft Bluetooth Notebook Mouse 5000: always reports core events
[ 3822.266] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: Device: "/dev/input/event14"
[ 3822.267] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Vendor 0x45e Product 0x700
[ 3822.267] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found 8 mouse buttons
[ 3822.267] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found scroll wheel(s)
[ 3822.267] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found relative axes
[ 3822.267] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found x and y relative axes
[ 3822.267] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found absolute axes
[ 3822.267] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Forcing absolute x/y axes to exist.
[ 3822.267] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Configuring as mouse
[ 3822.267] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Adding scrollwheel support
[ 3822.267] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: YAxisMapping: buttons 4 and 5
[ 3822.267] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3822.267] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/bluetooth/hci0/hci0:11/input14/event14"
[ 3822.267] (II) XINPUT: Adding extended input device "Microsoft Bluetooth Notebook Mouse 5000" (type: MOUSE, id 10)
[ 3822.267] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: initialized for relative axes.
[ 3822.267] (WW) evdev: Microsoft Bluetooth Notebook Mouse 5000: ignoring absolute axes.
[ 3822.267] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) keeping acceleration scheme 1
[ 3822.268] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration profile 0
[ 3822.268] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration factor: 2.000
[ 3822.268] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration threshold: 4
[ 3822.268] (II) config/udev: Adding input device Microsoft Bluetooth Notebook Mouse 5000 (/dev/input/mouse1)
[ 3822.268] (II) No input driver specified, ignoring this device.
[ 3822.268] (II) This device may have been added with another device file.
[ 3822.269] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2M (/dev/input/event10)
[ 3822.269] (**) Laptop_Integrated_Webcam_2M: Applying InputClass "evdev keyboard catchall"
[ 3822.269] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2M'
[ 3822.269] (**) Laptop_Integrated_Webcam_2M: always reports core events
[ 3822.269] (**) evdev: Laptop_Integrated_Webcam_2M: Device: "/dev/input/event10"
[ 3822.269] (--) evdev: Laptop_Integrated_Webcam_2M: Vendor 0xc45 Product 0x6430
[ 3822.269] (--) evdev: Laptop_Integrated_Webcam_2M: Found keys
[ 3822.269] (II) evdev: Laptop_Integrated_Webcam_2M: Configuring as keyboard
[ 3822.269] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[ 3822.269] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2M" (type: KEYBOARD, id 11)
[ 3822.269] (**) Option "xkb_rules" "evdev"
[ 3822.269] (**) Option "xkb_model" "evdev"
[ 3822.269] (**) Option "xkb_layout" "us"
[ 3822.270] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3822.270] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3822.270] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3822.270] (**) AT Translated Set 2 keyboard: always reports core events
[ 3822.271] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3822.271] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 3822.271] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 3822.271] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 3822.271] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3822.271] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 3822.271] (**) Option "xkb_rules" "evdev"
[ 3822.271] (**) Option "xkb_model" "evdev"
[ 3822.271] (**) Option "xkb_layout" "us"
[ 3822.272] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[ 3822.272] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3822.272] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3822.272] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 3822.272] (II) LoadModule: "synaptics"
[ 3822.272] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3822.273] (II) Module synaptics: vendor="X.Org Foundation"
[ 3822.273] compiled for 1.13.1, module version = 1.6.2
[ 3822.273] Module class: X.Org XInput Driver
[ 3822.273] ABI class: X.Org XInput driver, version 18.0
[ 3822.273] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3822.273] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3822.273] (**) Option "Device" "/dev/input/event13"
[ 3822.306] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 3822.306] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5590
[ 3822.306] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4582
[ 3822.306] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3822.306] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 3822.307] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 3822.307] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3822.307] (**) Option "TapButton1" "1"
[ 3822.307] (**) Option "TapButton2" "2"
[ 3822.307] (**) Option "TapButton3" "3"
[ 3822.307] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3822.307] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3822.316] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event13"
[ 3822.316] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 3822.316] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3822.316] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 3822.316] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 3822.317] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3822.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3822.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3822.317] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3822.317] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3822.318] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3822.318] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 3822.318] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 3822.318] (II) No input driver specified, ignoring this device.
[ 3822.318] (II) This device may have been added with another device file.
[ 3822.319] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[ 3822.319] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 3822.319] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 3822.320] (**) Dell WMI hotkeys: always reports core events
[ 3822.320] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
[ 3822.320] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 3822.320] (--) evdev: Dell WMI hotkeys: Found keys
[ 3822.320] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 3822.320] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event5"
[ 3822.320] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[ 3822.320] (**) Option "xkb_rules" "evdev"
[ 3822.320] (**) Option "xkb_model" "evdev"
[ 3822.320] (**) Option "xkb_layout" "us"
[ 3822.330] (II) intel(0): EDID vendor "AUO", prod id 12380
[ 3822.330] (II) intel(0): Printing DDC gathered Modelines:
[ 3822.330] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1414 1446 1470 768 771 777 793 +hsync -vsync (47.6 kHz eP)
[ 3822.715] (II) intel(0): EDID vendor "AUO", prod id 12380
[ 3822.715] (II) intel(0): Printing DDC gathered Modelines:
[ 3822.715] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1414 1446 1470 768 771 777 793 +hsync -vsync (47.6 kHz eP)
[ 3833.041] (II) intel(0): EDID vendor "AUO", prod id 12380
[ 3833.041] (II) intel(0): Printing DDC gathered Modelines:
[ 3833.041] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1414 1446 1470 768 771 777 793 +hsync -vsync (47.6 kHz eP)
[ 3833.208] (II) intel(0): EDID vendor "AUO", prod id 12380
[ 3833.208] (II) intel(0): Printing DDC gathered Modelines:
[ 3833.208] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1414 1446 1470 768 771 777 793 +hsync -vsync (47.6 kHz eP)
[ 3833.654] (II) intel(0): EDID vendor "AUO", prod id 12380
[ 3833.654] (II) intel(0): Printing DDC gathered Modelines:
[ 3833.654] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1414 1446 1470 768 771 777 793 +hsync -vsync (47.6 kHz eP)
[ 4144.113] (II) evdev: Dell WMI hotkeys: Close
[ 4144.113] (II) UnloadModule: "evdev"
[ 4144.113] (II) UnloadModule: "synaptics"
[ 4144.113] (II) evdev: AT Translated Set 2 keyboard: Close
[ 4144.113] (II) UnloadModule: "evdev"
[ 4144.113] (II) evdev: Laptop_Integrated_Webcam_2M: Close
[ 4144.113] (II) UnloadModule: "evdev"
[ 4144.113] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Close
[ 4144.114] (II) UnloadModule: "evdev"
[ 4144.114] (II) evdev: Plantronics Plantronics GameCom 780: Close
[ 4144.114] (II) UnloadModule: "evdev"
[ 4144.114] (II) evdev: Video Bus: Close
[ 4144.114] (II) UnloadModule: "evdev"
[ 4144.114] (II) evdev: Video Bus: Close
[ 4144.114] (II) UnloadModule: "evdev"
[ 4144.114] (II) evdev: Power Button: Close
[ 4144.114] (II) UnloadModule: "evdev"
[ 4144.870] Server terminated successfully (0). Closing log file.I can use optirun or primusrun I have both installed. I have run both optirun and primusrun with the xrandr queries to see about detecting a secondary display with the Displayport or hdmi and nothing! Any helps, tips, tricks, comments would be greatly appreciated because I am designing an Android application for my work and could use my secondary display working for more screen space.
**EDIT #1**
What I am currently running:
nvidia bumblebee/primus-git driver from AUR 313.18-1 and I am going to update my git repos of lib32-primus-git and primus-git to see if that doesn't help...
Also using 3.7.4-1-ARCH kernel.
**EDIT #2**
Okay so I have found out that the HDMI/VGA1 are both I guess hooked up to the GT 540M card which means that it won't show up without bumblebee/primus working. So I have tried using the Bumblebee how-to guide on github how to setup an external secondary display and well it really didn't work well at all!
First I did this:
I removed from /etc/bumblebee/bumblebee.conf KeepUnusedXServer = false to = true. I also have removed the UseEDID, and Option "AutoAddDevices" "false", from /etc/bumblebee/xorg.conf.nvidia. Also have tried to setup an export path before running commands:
export DISPLAY=:8 LD_LIBRARY_PATH=/usr/lib/nvidia-bumblebee:$LD_LIBRARY_PATH
optirun -vv true
[ 711.059889] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 711.250374] [DEBUG]optirun version 3.0.1 starting...
[ 711.250427] [DEBUG]Active configuration:
[ 711.250450] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 711.250457] [DEBUG] X display: :8
[ 711.250464] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
[ 711.250470] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 711.250476] [DEBUG] VGL Compression: proxy
[ 711.447419] [INFO]Response: No - error: Could not load GPU driver
[ 711.447441] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
[ 711.447447] [DEBUG]Socket closed.
[ 711.447463] [ERROR]Aborting because fallback start is disabled.
[ 711.447469] [DEBUG]Killing all remaining processes.Last edited by adramalech (2013-01-31 20:55:47)
Offline
Pages: 1