You are not logged in.

#151 2012-09-13 12:37:30

yourself
Member
Registered: 2008-10-23
Posts: 116

Re: [SOLVED]Linux3.4 broke resume/suspend some of the times in Lenovo T420

This is very weird you guys.

I have had no problems whatsoever after downgrading xf86-input-synaptics and I was having a crash every 20-24 hours like clockwork. Since you keep having crashes, can you post the backtrace of X so we may investigate?

Not suspending by closing the lid is definitely *NOT* an acceptable solution.

Offline

#152 2012-09-13 12:43:29

btorb
Member
Registered: 2012-08-06
Posts: 28

Re: [SOLVED]Linux3.4 broke resume/suspend some of the times in Lenovo T420

yourself wrote:

Not suspending by closing the lid is definitely *NOT* an acceptable solution.

True. But as a workaround it works. Also, i do occasionally pm-suspend by closing the lid (while fetching the event with acpid): I haven't had crashes yet. But since it is my work laptop, I prefer to circumvent the problem, rather than having to face all my work disappear... (I do occasianlly get the related problem that after resuming from suspend, the screen becomes three quarters black, and one quarter just colored noise. I can generally alleviate this by keystroking the system into suspend again and resume once more)

So, clearly, the problem with either the xf86 intel driver and/or synaptics driver are not completely solved yet. However, the simple workaround of keystroking (is this actually a verb?) my laptop into pm-suspend and closing the lid 2 seconds later, at least makes my computer a usable system again....

Last edited by btorb (2012-09-13 12:44:13)

Offline

#153 2012-09-21 06:10:39

aditya.shevade
Member
From: CA, USA
Registered: 2009-10-18
Posts: 26
Website

Re: [SOLVED]Linux3.4 broke resume/suspend some of the times in Lenovo T420

My problem is different -- If I close the lid both pm-suspend and systemd kick in so when I open the lid it wakes up, goes back to sleep and I need to press the power button to wake it up again.
Current uptime,  23:11:51 up 4 days, 10:30,  1 user,  load average: 0.23, 1.11, 1.21

Offline

#154 2012-09-30 23:42:05

petrelharp
Member
Registered: 2012-09-30
Posts: 1

Re: [SOLVED]Linux3.4 broke resume/suspend some of the times in Lenovo T420

FYI, there is a patch over in debian-land, submitted yesterday, that sounds like the same thing:
  http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681796

... perhaps this will fix the problem?

Offline

#155 2012-10-13 22:09:12

Essl
Member
Registered: 2012-07-15
Posts: 27

Re: [SOLVED]Linux3.4 broke resume/suspend some of the times in Lenovo T420

https://bugs.freedesktop.org/show_bug.cgi?id=52496

Seems to have made it into the upstream version. You should now be able to upgrade your input-synaptics without it crashing again. I haven't tested this yet, though.

Offline

#156 2012-10-14 05:14:31

aditya.shevade
Member
From: CA, USA
Registered: 2009-10-18
Posts: 26
Website

Re: [SOLVED]Linux3.4 broke resume/suspend some of the times in Lenovo T420

I saw the update to the synaptics package today. I haven't had any issues at all since I
1. Downgraded synaptics
2. Moved to systemd.

Offline

#157 2012-10-23 17:03:11

yourself
Member
Registered: 2008-10-23
Posts: 116

Re: [SOLVED]Linux3.4 broke resume/suspend some of the times in Lenovo T420

Unfortunately, arch did not include this patch
http://cgit.freedesktop.org/xorg/driver … ca508e5b5b
when it repackaged xf86-input-synaptics and since the latest release is 1.6.2 CONTAINING the bug this is what we got
(yes, I experienced it again (systemd here, too), albeit after 2.5 days of uptime and without the moon led flashing but my X session was again lost).

So, in order to get rid of the frigging thing once and for all, use the abs system to pull xf86-input-synaptics, apply this patch yourself, build the package and install.
http://cgit.freedesktop.org/xorg/driver … ca508e5b5b

No problems since!

Last edited by yourself (2012-10-23 17:03:40)

Offline

#158 2013-01-17 06:26:55

aditya.shevade
Member
From: CA, USA
Registered: 2009-10-18
Posts: 26
Website

Re: [SOLVED]Linux3.4 broke resume/suspend some of the times in Lenovo T420

I did everything mentioned in the thread. Still no effect sad

[    16.576] 
X.Org X Server 1.13.1
Release Date: 2012-12-13
[    16.576] X Protocol Version 11, Revision 0
[    16.576] Build Operating System: Linux 3.7.0-1-ARCH x86_64 
[    16.576] Current Operating System: Linux archie 3.7.2-2-ck #1 SMP PREEMPT Sat Jan 12 06:52:44 EST 2013 x86_64
[    16.576] Kernel command line: root=/dev/sda5 ro elevator=bfq pcie_aspm=force i915.i915_enable_rc6=7 i915.i915_enable_fbc=1 i915.lvds_downclock=1
[    16.576] Build Date: 16 December 2012  04:45:14PM
[    16.576]  
[    16.576] Current version of pixman: 0.28.2
[    16.576] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    16.576] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    16.577] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 14 17:37:26 2013
[    16.618] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    16.672] (==) No Layout section.  Using the first Screen section.
[    16.672] (==) No screen section available. Using defaults.
[    16.672] (**) |-->Screen "Default Screen Section" (0)
[    16.672] (**) |   |-->Monitor "<default monitor>"
[    16.672] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    16.672] (**) |   |-->Device "Intel Graphics"
[    16.672] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    16.672] (==) Automatically adding devices
[    16.672] (==) Automatically enabling devices
[    16.672] (==) Automatically adding GPU devices
[    16.699] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    16.699] 	Entry deleted from font path.
[    16.712] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    16.712] 	Entry deleted from font path.
[    16.712] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    16.713] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    16.713] 	Entry deleted from font path.
[    16.713] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    16.713] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    16.713] (==) ModulePath set to "/usr/lib/xorg/modules"
[    16.713] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    16.713] (II) Loader magic: 0x7fcc40
[    16.713] (II) Module ABI versions:
[    16.713] 	X.Org ANSI C Emulation: 0.4
[    16.713] 	X.Org Video Driver: 13.1
[    16.713] 	X.Org XInput driver : 18.0
[    16.713] 	X.Org Server Extension : 7.0
[    16.713] (II) config/udev: Adding drm device (/dev/dri/card0)
[    16.714] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[    16.714] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    16.715] Initializing built-in extension Generic Event Extension
[    16.715] Initializing built-in extension SHAPE
[    16.715] Initializing built-in extension MIT-SHM
[    16.715] Initializing built-in extension XInputExtension
[    16.715] Initializing built-in extension XTEST
[    16.715] Initializing built-in extension BIG-REQUESTS
[    16.715] Initializing built-in extension SYNC
[    16.715] Initializing built-in extension XKEYBOARD
[    16.715] Initializing built-in extension XC-MISC
[    16.715] Initializing built-in extension SECURITY
[    16.715] Initializing built-in extension XINERAMA
[    16.715] Initializing built-in extension XFIXES
[    16.715] Initializing built-in extension RENDER
[    16.715] Initializing built-in extension RANDR
[    16.715] Initializing built-in extension COMPOSITE
[    16.715] Initializing built-in extension DAMAGE
[    16.715] Initializing built-in extension MIT-SCREEN-SAVER
[    16.715] Initializing built-in extension DOUBLE-BUFFER
[    16.715] Initializing built-in extension RECORD
[    16.715] Initializing built-in extension DPMS
[    16.715] Initializing built-in extension X-Resource
[    16.715] Initializing built-in extension XVideo
[    16.715] Initializing built-in extension XVideo-MotionCompensation
[    16.715] Initializing built-in extension XFree86-VidModeExtension
[    16.715] Initializing built-in extension XFree86-DGA
[    16.715] Initializing built-in extension XFree86-DRI
[    16.715] Initializing built-in extension DRI2
[    16.715] (II) LoadModule: "glx"
[    16.777] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.795] (II) Module glx: vendor="X.Org Foundation"
[    16.795] 	compiled for 1.13.1, module version = 1.0.0
[    16.795] 	ABI class: X.Org Server Extension, version 7.0
[    16.795] (==) AIGLX enabled
[    16.795] Loading extension GLX
[    16.795] (II) LoadModule: "intel"
[    16.795] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    16.835] (II) Module intel: vendor="X.Org Foundation"
[    16.835] 	compiled for 1.13.1, module version = 2.20.17
[    16.835] 	Module class: X.Org Video Driver
[    16.835] 	ABI class: X.Org Video Driver, version 13.1
[    16.836] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[    16.837] (++) using VT number 1

[    16.847] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    16.847] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    16.847] (==) intel(0): RGB weight 888
[    16.847] (==) intel(0): Default visual is TrueColor
[    16.847] (**) intel(0): Option "AccelMethod" "sna"
[    16.847] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[    16.848] (**) intel(0): Framebuffer tiled
[    16.848] (**) intel(0): Pixmaps tiled
[    16.848] (**) intel(0): 3D buffers tiled
[    16.852] (**) intel(0): Throttling enabled
[    16.852] (**) intel(0): Delayed flush enabled
[    16.852] (**) intel(0): "Tear free" disabled
[    16.852] (**) intel(0): Forcing per-crtc-pixmaps? no
[    16.853] (II) intel(0): Output LVDS1 has no monitor section
[    16.853] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[    16.863] (II) intel(0): Output VGA1 has no monitor section
[    16.890] (II) intel(0): Output HDMI1 has no monitor section
[    16.930] (II) intel(0): Output DP1 has no monitor section
[    16.943] (II) intel(0): Output HDMI2 has no monitor section
[    16.956] (II) intel(0): Output HDMI3 has no monitor section
[    16.996] (II) intel(0): Output DP2 has no monitor section
[    17.036] (II) intel(0): Output DP3 has no monitor section
[    17.036] (II) intel(0): EDID for output LVDS1
[    17.036] (II) intel(0): Manufacturer: AUO  Model: 213e  Serial#: 0
[    17.036] (II) intel(0): Year: 2010  Week: 33
[    17.036] (II) intel(0): EDID Version: 1.4
[    17.036] (II) intel(0): Digital Display Input
[    17.036] (II) intel(0): 6 bits per channel
[    17.036] (II) intel(0): Digital interface is undefined
[    17.036] (II) intel(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[    17.037] (II) intel(0): Gamma: 2.20
[    17.037] (II) intel(0): No DPMS capabilities specified
[    17.037] (II) intel(0): Supported color encodings: RGB 4:4:4 
[    17.037] (II) intel(0): First detailed timing is preferred mode
[    17.037] (II) intel(0): Preferred mode is native pixel format and refresh rate
[    17.037] (II) intel(0): redX: 0.610 redY: 0.350   greenX: 0.320 greenY: 0.560
[    17.037] (II) intel(0): blueX: 0.150 blueY: 0.130   whiteX: 0.313 whiteY: 0.329
[    17.037] (II) intel(0): Manufacturer's mask: 0
[    17.037] (II) intel(0): Supported detailed timing:
[    17.037] (II) intel(0): clock: 110.0 MHz   Image Size:  309 x 174 mm
[    17.037] (II) intel(0): h_active: 1600  h_sync: 1664  h_sync_end 1706 h_blank_end 2010 h_border: 0
[    17.037] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 906 v_blanking: 912 v_border: 0
[    17.037] (II) intel(0): Supported detailed timing:
[    17.037] (II) intel(0): clock: 73.3 MHz   Image Size:  309 x 174 mm
[    17.037] (II) intel(0): h_active: 1600  h_sync: 1664  h_sync_end 1706 h_blank_end 2010 h_border: 0
[    17.037] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 906 v_blanking: 912 v_border: 0
[    17.037] (II) intel(0):  AUO
[    17.037] (II) intel(0):  B140RW02 V1
[    17.037] (II) intel(0): EDID (in hex):
[    17.037] (II) intel(0): 	00ffffffffffff0006af3e2100000000
[    17.037] (II) intel(0): 	21140104901f11780261959c59528f26
[    17.037] (II) intel(0): 	21505400000001010101010101010101
[    17.037] (II) intel(0): 	010101010101f82a409a61840c30402a
[    17.037] (II) intel(0): 	330035ae10000018a51c409a61840c30
[    17.037] (II) intel(0): 	402a330035ae10000018000000fe0041
[    17.037] (II) intel(0): 	554f0a202020202020202020000000fe
[    17.037] (II) intel(0): 	004231343052573032205631200a00d0
[    17.037] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    17.037] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.037] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    17.037] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    17.037] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    17.037] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    17.037] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    17.037] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    17.037] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    17.037] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    17.037] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    17.037] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    17.037] (II) intel(0): Printing probed modes for output LVDS1
[    17.037] (II) intel(0): Modeline "1600x900"x60.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[    17.037] (II) intel(0): Modeline "1600x900"x40.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[    17.037] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    17.037] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    17.037] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    17.037] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    17.050] (II) intel(0): EDID for output VGA1
[    17.076] (II) intel(0): EDID for output HDMI1
[    17.116] (II) intel(0): EDID for output DP1
[    17.130] (II) intel(0): EDID for output HDMI2
[    17.143] (II) intel(0): EDID for output HDMI3
[    17.183] (II) intel(0): EDID for output DP2
[    17.223] (II) intel(0): EDID for output DP3
[    17.223] (II) intel(0): Output LVDS1 connected
[    17.223] (II) intel(0): Output VGA1 disconnected
[    17.223] (II) intel(0): Output HDMI1 disconnected
[    17.223] (II) intel(0): Output DP1 disconnected
[    17.223] (II) intel(0): Output HDMI2 disconnected
[    17.223] (II) intel(0): Output HDMI3 disconnected
[    17.223] (II) intel(0): Output DP2 disconnected
[    17.223] (II) intel(0): Output DP3 disconnected
[    17.223] (II) intel(0): Using exact sizes for initial modes
[    17.223] (II) intel(0): Output LVDS1 using initial mode 1600x900
[    17.223] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    17.223] (==) intel(0): DPI set to (96, 96)
[    17.223] (II) Loading sub module "dri2"
[    17.223] (II) LoadModule: "dri2"
[    17.223] (II) Module "dri2" already built-in
[    17.223] (==) Depth 24 pixmap format is 32 bpp
[    17.594] (II) intel(0): SNA initialized with SandyBridge backend
[    17.594] (==) intel(0): Backing store disabled
[    17.594] (==) intel(0): Silken mouse enabled
[    17.594] (II) intel(0): HW Cursor enabled
[    17.594] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    17.596] (==) intel(0): DPMS enabled
[    17.598] (II) intel(0): [DRI2] Setup complete
[    17.598] (II) intel(0): [DRI2]   DRI driver: i965
[    17.598] (II) intel(0): direct rendering: DRI2 Enabled
[    17.598] (==) intel(0): hotplug detection: "enabled"
[    17.598] (--) RandR disabled
[    17.731] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    17.731] (II) AIGLX: enabled GLX_INTEL_swap_event
[    17.731] (II) AIGLX: enabled GLX_ARB_create_context
[    17.731] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    17.731] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    17.731] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    17.731] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    17.732] (II) AIGLX: Loaded and initialized i965
[    17.732] (II) GLX: Initialized DRI2 GL provider for screen 0
[    17.732] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[    17.757] (II) intel(0): Setting screen physical size to 423 x 238
[    18.392] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    18.392] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.392] (II) LoadModule: "evdev"
[    18.415] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.435] (II) Module evdev: vendor="X.Org Foundation"
[    18.435] 	compiled for 1.13.0, module version = 2.7.3
[    18.435] 	Module class: X.Org XInput Driver
[    18.435] 	ABI class: X.Org XInput driver, version 18.0
[    18.435] (II) Using input driver 'evdev' for 'Power Button'
[    18.435] (**) Power Button: always reports core events
[    18.436] (**) evdev: Power Button: Device: "/dev/input/event3"
[    18.436] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.436] (--) evdev: Power Button: Found keys
[    18.436] (II) evdev: Power Button: Configuring as keyboard
[    18.436] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    18.436] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.436] (**) Option "xkb_rules" "evdev"
[    18.436] (**) Option "xkb_model" "evdev"
[    18.436] (**) Option "xkb_layout" "us"
[    18.452] (II) config/udev: Adding input device Video Bus (/dev/input/event16)
[    18.452] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    18.452] (II) Using input driver 'evdev' for 'Video Bus'
[    18.452] (**) Video Bus: always reports core events
[    18.452] (**) evdev: Video Bus: Device: "/dev/input/event16"
[    18.452] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    18.452] (--) evdev: Video Bus: Found keys
[    18.452] (II) evdev: Video Bus: Configuring as keyboard
[    18.452] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event16"
[    18.452] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    18.452] (**) Option "xkb_rules" "evdev"
[    18.452] (**) Option "xkb_model" "evdev"
[    18.452] (**) Option "xkb_layout" "us"
[    18.452] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    18.452] (II) No input driver specified, ignoring this device.
[    18.452] (II) This device may have been added with another device file.
[    18.452] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    18.452] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    18.452] (II) Using input driver 'evdev' for 'Sleep Button'
[    18.452] (**) Sleep Button: always reports core events
[    18.452] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    18.452] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    18.452] (--) evdev: Sleep Button: Found keys
[    18.452] (II) evdev: Sleep Button: Configuring as keyboard
[    18.452] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    18.452] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    18.452] (**) Option "xkb_rules" "evdev"
[    18.452] (**) Option "xkb_model" "evdev"
[    18.453] (**) Option "xkb_layout" "us"
[    18.453] (II) config/udev: Adding drm device (/dev/dri/card0)
[    18.453] (II) config/udev: Adding input device Integrated Camera (/dev/input/event14)
[    18.453] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[    18.453] (II) Using input driver 'evdev' for 'Integrated Camera'
[    18.453] (**) Integrated Camera: always reports core events
[    18.453] (**) evdev: Integrated Camera: Device: "/dev/input/event14"
[    18.453] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb221
[    18.453] (--) evdev: Integrated Camera: Found keys
[    18.453] (II) evdev: Integrated Camera: Configuring as keyboard
[    18.453] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input14/event14"
[    18.453] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[    18.453] (**) Option "xkb_rules" "evdev"
[    18.453] (**) Option "xkb_model" "evdev"
[    18.453] (**) Option "xkb_layout" "us"
[    18.453] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[    18.453] (II) No input driver specified, ignoring this device.
[    18.453] (II) This device may have been added with another device file.
[    18.454] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event10)
[    18.454] (II) No input driver specified, ignoring this device.
[    18.454] (II) This device may have been added with another device file.
[    18.454] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event11)
[    18.454] (II) No input driver specified, ignoring this device.
[    18.454] (II) This device may have been added with another device file.
[    18.454] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[    18.454] (II) No input driver specified, ignoring this device.
[    18.454] (II) This device may have been added with another device file.
[    18.454] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event6)
[    18.454] (II) No input driver specified, ignoring this device.
[    18.454] (II) This device may have been added with another device file.
[    18.454] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event7)
[    18.454] (II) No input driver specified, ignoring this device.
[    18.454] (II) This device may have been added with another device file.
[    18.454] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event8)
[    18.454] (II) No input driver specified, ignoring this device.
[    18.454] (II) This device may have been added with another device file.
[    18.454] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    18.454] (II) No input driver specified, ignoring this device.
[    18.454] (II) This device may have been added with another device file.
[    18.454] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    18.454] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    18.454] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    18.455] (**) AT Translated Set 2 keyboard: always reports core events
[    18.455] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    18.455] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    18.455] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    18.455] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    18.455] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    18.455] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    18.455] (**) Option "xkb_rules" "evdev"
[    18.455] (**) Option "xkb_model" "evdev"
[    18.455] (**) Option "xkb_layout" "us"
[    18.455] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[    18.455] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    18.455] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    18.455] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    18.455] (II) LoadModule: "synaptics"
[    18.455] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    18.466] (II) Module synaptics: vendor="X.Org Foundation"
[    18.466] 	compiled for 1.13.1, module version = 1.6.2
[    18.466] 	Module class: X.Org XInput Driver
[    18.466] 	ABI class: X.Org XInput driver, version 18.0
[    18.466] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    18.466] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    18.466] (**) Option "Device" "/dev/input/event15"
[    18.473] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    18.473] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[    18.473] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
[    18.473] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    18.473] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    18.473] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    18.473] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    18.473] (**) Option "TapButton1" "1"
[    18.473] (**) Option "TapButton2" "2"
[    18.473] (**) Option "TapButton3" "3"
[    18.473] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    18.473] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    18.476] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event15"
[    18.476] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    18.476] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    18.476] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    18.477] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[    18.477] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    18.477] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    18.477] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    18.477] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    18.477] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    18.477] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    18.477] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    18.477] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event17)
[    18.477] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[    18.477] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[    18.477] (**) TPPS/2 IBM TrackPoint: always reports core events
[    18.477] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event17"
[    18.477] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[    18.477] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[    18.477] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[    18.477] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[    18.477] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[    18.477] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[    18.477] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    18.477] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input17/event17"
[    18.477] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[    18.477] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[    18.478] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[    18.478] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[    18.478] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    18.478] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    18.478] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[    18.478] (II) No input driver specified, ignoring this device.
[    18.478] (II) This device may have been added with another device file.
[    18.478] (II) config/udev: Adding input device PC Speaker (/dev/input/event13)
[    18.478] (II) No input driver specified, ignoring this device.
[    18.478] (II) This device may have been added with another device file.
[    18.478] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[    18.478] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[    18.478] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[    18.478] (**) ThinkPad Extra Buttons: always reports core events
[    18.478] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
[    18.478] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[    18.478] (--) evdev: ThinkPad Extra Buttons: Found keys
[    18.478] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[    18.478] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input4/event4"
[    18.478] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[    18.478] (**) Option "xkb_rules" "evdev"
[    18.478] (**) Option "xkb_model" "evdev"
[    18.478] (**) Option "xkb_layout" "us"
[    18.481] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[    18.481] (II) No input driver specified, ignoring this device.
[    18.481] (II) This device may have been added with another device file.
[    18.481] (II) config/udev: removing device TPPS/2 IBM TrackPoint
[    18.492] (II) evdev: TPPS/2 IBM TrackPoint: Close
[    18.492] (II) UnloadModule: "evdev"
[    18.492] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event17)
[    18.492] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[    18.492] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[    18.492] (**) TPPS/2 IBM TrackPoint: always reports core events
[    18.492] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event17"
[    18.492] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[    18.492] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[    18.492] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[    18.492] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[    18.492] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[    18.492] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[    18.492] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    18.492] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input17/event17"
[    18.492] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[    18.493] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[    18.493] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[    18.493] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[    18.493] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    18.493] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    18.499] (II) intel(0): EDID vendor "AUO", prod id 8510
[    18.499] (II) intel(0): Printing DDC gathered Modelines:
[    18.499] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[    18.499] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[    25.381] (II) intel(0): EDID vendor "AUO", prod id 8510
[    25.381] (II) intel(0): Printing DDC gathered Modelines:
[    25.381] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[    25.381] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[    49.358] (II) intel(0): EDID vendor "AUO", prod id 8510
[    49.358] (II) intel(0): Printing DDC gathered Modelines:
[    49.358] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[    49.358] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[    53.122] (II) intel(0): EDID vendor "AUO", prod id 8510
[    53.122] (II) intel(0): Printing DDC gathered Modelines:
[    53.122] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[    53.122] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[    53.333] (II) intel(0): EDID vendor "AUO", prod id 8510
[    53.333] (II) intel(0): Printing DDC gathered Modelines:
[    53.333] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[    53.333] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  4163.848] (II) intel(0): EDID vendor "AUO", prod id 8510
[  4163.848] (II) intel(0): Printing DDC gathered Modelines:
[  4163.848] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  4163.848] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  4164.034] (II) intel(0): EDID vendor "AUO", prod id 8510
[  4164.034] (II) intel(0): Printing DDC gathered Modelines:
[  4164.034] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  4164.034] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  4164.514] (II) intel(0): EDID vendor "AUO", prod id 8510
[  4164.514] (II) intel(0): Printing DDC gathered Modelines:
[  4164.514] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  4164.514] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  4164.745] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[  4166.209] (II) AIGLX: Suspending AIGLX clients for VT switch
[  4170.824] (II) AIGLX: Resuming AIGLX clients after VT switch
[  4170.824] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[  4170.829] (II) intel(0): EDID vendor "AUO", prod id 8510
[  4170.829] (II) intel(0): Printing DDC gathered Modelines:
[  4170.829] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  4170.829] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  4171.033] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  4171.189] (II) intel(0): EDID vendor "AUO", prod id 8510
[  4171.189] (II) intel(0): Printing DDC gathered Modelines:
[  4171.189] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  4171.189] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  9954.373] (II) intel(0): EDID vendor "AUO", prod id 8510
[  9954.373] (II) intel(0): Printing DDC gathered Modelines:
[  9954.373] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  9954.373] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 10189.973] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 13352.826] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 13352.826] (II) intel(0): Printing DDC gathered Modelines:
[ 13352.826] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 13352.826] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 13353.022] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 13353.022] (II) intel(0): Printing DDC gathered Modelines:
[ 13353.022] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 13353.022] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 13353.505] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 13353.505] (II) intel(0): Printing DDC gathered Modelines:
[ 13353.505] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 13353.505] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 13353.698] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 13355.332] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 13359.850] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 13359.850] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 13359.862] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 13359.862] (II) intel(0): Printing DDC gathered Modelines:
[ 13359.862] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 13359.862] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 13360.063] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 13360.213] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 13360.213] (II) intel(0): Printing DDC gathered Modelines:
[ 13360.213] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 13360.213] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17174.201] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17174.201] (II) intel(0): Printing DDC gathered Modelines:
[ 17174.201] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17174.201] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17174.394] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17174.394] (II) intel(0): Printing DDC gathered Modelines:
[ 17174.394] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17174.394] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17174.898] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17174.898] (II) intel(0): Printing DDC gathered Modelines:
[ 17174.898] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17174.898] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17175.095] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 17176.238] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 17180.751] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 17180.751] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 17180.771] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17180.771] (II) intel(0): Printing DDC gathered Modelines:
[ 17180.771] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17180.771] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17180.972] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 17181.146] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17181.147] (II) intel(0): Printing DDC gathered Modelines:
[ 17181.147] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17181.147] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17375.422] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17375.422] (II) intel(0): Printing DDC gathered Modelines:
[ 17375.422] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17375.423] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17375.616] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17375.616] (II) intel(0): Printing DDC gathered Modelines:
[ 17375.616] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17375.616] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17376.099] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17376.099] (II) intel(0): Printing DDC gathered Modelines:
[ 17376.099] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17376.099] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17377.175] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 17378.915] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 17383.391] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 17383.391] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 17383.398] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17383.398] (II) intel(0): Printing DDC gathered Modelines:
[ 17383.398] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17383.398] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17383.599] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 17383.831] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17383.832] (II) intel(0): Printing DDC gathered Modelines:
[ 17383.832] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17383.832] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17603.999] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17603.999] (II) intel(0): Printing DDC gathered Modelines:
[ 17603.999] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17603.999] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17604.478] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17604.479] (II) intel(0): Printing DDC gathered Modelines:
[ 17604.479] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17604.479] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17604.684] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 17605.001] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17605.001] (II) intel(0): Printing DDC gathered Modelines:
[ 17605.001] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17605.001] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17606.778] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 17611.427] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 17611.427] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 17611.438] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17611.438] (II) intel(0): Printing DDC gathered Modelines:
[ 17611.438] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17611.438] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 17611.849] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 17612.836] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 17612.836] (II) intel(0): Printing DDC gathered Modelines:
[ 17612.836] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 17612.836] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 19304.348] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 19304.348] (II) intel(0): Printing DDC gathered Modelines:
[ 19304.348] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 19304.348] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 19656.867] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 27269.643] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 27269.643] (II) intel(0): Printing DDC gathered Modelines:
[ 27269.643] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 27269.643] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 28295.352] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 29085.595] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 29085.595] (II) intel(0): Printing DDC gathered Modelines:
[ 29085.595] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 29085.595] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 29713.254] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 31089.421] (II) config/udev: Adding input device Sony PLAYSTATION(R)3 Controller (/dev/input/event18)
[ 31089.421] (II) No input driver specified, ignoring this device.
[ 31089.421] (II) This device may have been added with another device file.
[ 31089.421] (II) config/udev: Adding input device Sony PLAYSTATION(R)3 Controller (/dev/input/js0)
[ 31089.421] (II) No input driver specified, ignoring this device.
[ 31089.421] (II) This device may have been added with another device file.
[ 31496.270] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 31496.270] (II) intel(0): Printing DDC gathered Modelines:
[ 31496.270] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 31496.270] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 33174.389] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 39997.753] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 39997.781] (II) intel(0): Printing DDC gathered Modelines:
[ 39997.781] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 39997.781] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 39998.323] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 39998.323] (II) intel(0): Printing DDC gathered Modelines:
[ 39998.323] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 39998.323] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 39999.056] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 39999.056] (II) intel(0): Printing DDC gathered Modelines:
[ 39999.056] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 39999.056] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 39999.242] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 40001.771] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 40007.532] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 40007.532] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 40007.536] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 40007.536] (II) intel(0): Printing DDC gathered Modelines:
[ 40007.536] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 40007.536] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 40007.793] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 40008.457] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 40008.457] (II) intel(0): Printing DDC gathered Modelines:
[ 40008.457] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 40008.457] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 40269.804] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 40269.804] (II) intel(0): Printing DDC gathered Modelines:
[ 40269.804] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 40269.804] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 40269.994] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 40269.994] (II) intel(0): Printing DDC gathered Modelines:
[ 40269.994] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 40269.994] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 40270.493] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 40270.493] (II) intel(0): Printing DDC gathered Modelines:
[ 40270.493] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 40270.493] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 40270.805] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 40272.989] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 40277.499] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 40277.499] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 40277.512] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 40277.512] (II) intel(0): Printing DDC gathered Modelines:
[ 40277.512] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 40277.629] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 40277.830] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 40278.621] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 40278.621] (II) intel(0): Printing DDC gathered Modelines:
[ 40278.621] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 40278.622] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 42925.908] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 42925.908] (II) intel(0): Printing DDC gathered Modelines:
[ 42925.908] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 42925.908] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 43001.878] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 43002.071] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 43002.071] (II) intel(0): Printing DDC gathered Modelines:
[ 43002.071] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 43002.071] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 43002.409] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 43002.409] (II) intel(0): Printing DDC gathered Modelines:
[ 43002.409] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 43002.409] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 43002.601] (II) intel(0): switch to mode 1600x900 on crtc 3 (pipe 0)
[ 43003.745] (EE) 
[ 43003.745] (EE) Backtrace:
[ 43003.772] (EE) 0: /usr/bin/Xorg (xorg_backtrace+0x36) [0x58a426]
[ 43003.772] (EE) 1: /usr/bin/Xorg (0x400000+0x18e279) [0x58e279]
[ 43003.772] (EE) 2: /usr/lib/libpthread.so.0 (0x7f25f7454000+0xf1e0) [0x7f25f74631e0]
[ 43003.772] (EE) 3: /usr/bin/Xorg (XIChangeDeviceProperty+0x1b8) [0x524528]
[ 43003.772] (EE) 4: /usr/bin/Xorg (DisableDevice+0x2a6) [0x430ed6]
[ 43003.772] (EE) 5: /usr/bin/Xorg (xf86Wakeup+0x4a4) [0x476664]
[ 43003.772] (EE) 6: /usr/bin/Xorg (WakeupHandler+0x6b) [0x43c1db]
[ 43003.772] (EE) 7: /usr/bin/Xorg (WaitForSomething+0x1a4) [0x587864]
[ 43003.772] (EE) 8: /usr/bin/Xorg (0x400000+0x37bb1) [0x437bb1]
[ 43003.772] (EE) 9: /usr/bin/Xorg (0x400000+0x2696a) [0x42696a]
[ 43003.772] (EE) 10: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f25f60d8a15]
[ 43003.772] (EE) 11: /usr/bin/Xorg (0x400000+0x26cad) [0x426cad]
[ 43003.772] (EE) 
[ 43003.772] (EE) Segmentation fault at address 0x11
[ 43003.772] 
Fatal server error:
[ 43003.772] Caught signal 11 (Segmentation fault). Server aborting
[ 43003.772] 
[ 43003.772] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[ 43003.772] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 43003.772] (EE) 
[ 43003.803] (II) evdev: ThinkPad Extra Buttons: Close
[ 43003.803] (II) UnloadModule: "evdev"
[ 43003.806] (II) evdev: TPPS/2 IBM TrackPoint: Close
[ 43003.806] (II) UnloadModule: "evdev"

Offline

#159 2013-01-18 10:53:55

yourself
Member
Registered: 2008-10-23
Posts: 116

Re: [SOLVED]Linux3.4 broke resume/suspend some of the times in Lenovo T420

If you updated recently, arch pushed another package release still containing the bug. So, either wait for the next version (which should be coming shortly) or do it again on the latest arch package.

Last edited by yourself (2013-01-18 10:54:13)

Offline

#160 2013-01-30 13:54:56

mrbrich
Member
Registered: 2010-04-24
Posts: 42

Re: [SOLVED]Linux3.4 broke resume/suspend some of the times in Lenovo T420

Thank you so much for this thread.  This problem was really annoying.  BTW, I'm on lenovo t400s (intel graphics of course).  I'm downgrading xf86-input-synaptics to 1.5.99.902-1 as suggested.  I hope it works.

Offline

#161 2013-01-30 14:01:21

mrbrich
Member
Registered: 2010-04-24
Posts: 42

Re: [SOLVED]Linux3.4 broke resume/suspend some of the times in Lenovo T420

After downgrading xf86-input-synaptics to 1.5.99.902-1 my touchpad was not working so I went back to 1.6.2-4.  I guess my problem is not solved yet.

Offline

#162 2013-02-01 13:42:11

yourself
Member
Registered: 2008-10-23
Posts: 116

Re: [SOLVED]Linux3.4 broke resume/suspend some of the times in Lenovo T420

Yes, the downgrade will now not work since the new xserver depends on the newer synaptics.

If you are not comfortable deploying your own package using the ABS as I described in my previous posts, then wait just a bit: xf86-input-synaptics version 1.6.3 has just been tagged according to http://cgit.freedesktop.org/xorg/driver … synaptics/ and hopefully Arch will include it soon. 1.6.3 already contains the fix responsible for your crashes.

Offline

#163 2013-02-01 17:27:34

mrbrich
Member
Registered: 2010-04-24
Posts: 42

Re: [SOLVED]Linux3.4 broke resume/suspend some of the times in Lenovo T420

I just updated to 1.6.3.  Thanks again.

Offline

#164 2013-02-16 20:16:52

ArchChem
Member
Registered: 2013-02-16
Posts: 6

Re: [SOLVED]Linux3.4 broke resume/suspend some of the times in Lenovo T420

Hello
I'm sorry but for me the problem still exists. I'have got a Medion Laptop with Intel graphics. The packages xf86-input-synaptics and xf86-video-intel are up to date.

Offline

Board footer

Powered by FluxBB