Could not build cups-canon-3.00 from AUR

Kierek · 2013-02-20 18:39:17

Hi!

I'm coming from linux mint and I'm totally amazed by simplicity of Arch Linux. However, I have problem with installing my printer (Canon IP1900). I'm unable to install canon-cups-3.00 from AUR (using yaourt). It gives me this error:

==> Zaczynam build()
patching file backend/src/cnij_backend_common.c
patching file cngpijmon/src/bjcupsmon_cups.c
......... libs
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:4: error: 'AM_CONFIG_HEADER': this macro is obsolete.
    You should use the 'AC_CONFIG_HEADERS' macro instead.
/usr/share/aclocal-1.13/obsolete-err.m4:12: AM_CONFIG_HEADER is expanded from...
configure.in:4: the top level
autom4te: /usr/bin/m4 failed with exit status: 1
aclocal: error: echo failed with exit status: 1
Running autoheader...
autoheader: error: AC_CONFIG_HEADERS not found in configure.in
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in: error: no proper invocation of AM_INIT_AUTOMAKE was found.
configure.in: You should verify that configure.in invokes AM_INIT_AUTOMAKE,
configure.in: that aclocal.m4 is present in the top-level directory,
configure.in: and that aclocal.m4 was recently regenerated (using aclocal)
configure.in:9: installing './install-sh'
Makefile.am: installing './COPYING' using GNU General Public License v3 file
Makefile.am:     Consider adding the COPYING file to the version control system
Makefile.am:     for your code, to avoid questions about which license your project uses
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
buftool/Makefile.am:1: error: library used but 'RANLIB' is undefined
buftool/Makefile.am:1:   The usual way to define 'RANLIB' is to add 'AC_PROG_RANLIB'
buftool/Makefile.am:1:   to 'configure.in' and run 'autoconf' again.
buftool/Makefile.am: installing './depcomp'
/usr/share/automake-1.13/am/depend2.am: error: am__fastdepCC does not appear in AM_CONDITIONAL
/usr/share/automake-1.13/am/depend2.am:   The usual way to define 'am__fastdepCC' is to add 'AC_PROG_CC'
/usr/share/automake-1.13/am/depend2.am:   to 'configure.in' and run 'aclocal' and 'autoconf' again
/usr/share/automake-1.13/am/depend2.am: error: AMDEP does not appear in AM_CONDITIONAL
/usr/share/automake-1.13/am/depend2.am:   The usual way to define 'AMDEP' is to add one of the compiler tests
/usr/share/automake-1.13/am/depend2.am:     AC_PROG_CC, AC_PROG_CXX, AC_PROG_OBJC, AC_PROG_OBJCXX,
/usr/share/automake-1.13/am/depend2.am:     AM_PROG_AS, AM_PROG_GCJ, AM_PROG_UPC
/usr/share/automake-1.13/am/depend2.am:   to 'configure.in' and run 'aclocal' and 'autoconf' again
paramlist/Makefile.am:1: error: Libtool library used but 'LIBTOOL' is undefined
paramlist/Makefile.am:1:   The usual way to define 'LIBTOOL' is to add 'LT_INIT'
paramlist/Makefile.am:1:   to 'configure.in' and run 'aclocal' and 'autoconf' again.
paramlist/Makefile.am:1:   If 'LT_INIT' is in 'configure.in', make sure
paramlist/Makefile.am:1:   its definition is in aclocal's search path.
Running autoconf ...
configure.in:2: error: possibly undefined macro: AM_INIT_AUTOMAKE
      If this token and others are legitimate, please use m4_pattern_allow.
      See the Autoconf documentation.
configure.in:4: error: possibly undefined macro: AM_CONFIG_HEADER
configure.in:11: error: possibly undefined macro: AM_PROG_LIBTOOL
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
configure: WARNING: unrecognized options: --enable-progpath
./configure: line 2181: syntax error near unexpected token `buftool,'
./configure: line 2181: `AM_INIT_AUTOMAKE(buftool, 1.0.0)'
==> BŁĄD: Wystąpił błąd w build().
    Przerywam...
==> ERROR: Makepkg was unable to build cups-canon-3.00.

I tried downgrading automake to 1.11 from AUR, but then, when I try to compile cups-canon-3.00 it just gives me error, that I don't have automake (yes, I did "export automake=automake-1.11").

I'm fighting with it for hours, and still nothing...

Scimmia · 2013-02-20 18:57:55

first off, try editing the PKGBUILD to update some of the macro names. Run:

sed -i 's/AM_CONFIG_HEADER/AC_CONFIG_HEADERS/g' configure.in

just before the ./autogen.sh command and see what happens.

Also, make sure you have the entire base-devel group installed.

Last edited by Scimmia (2013-02-20 19:15:27)

Kierek · 2013-02-20 19:13:31

As you propably saw, there are two autogen.sh commands in PKGBUILD. If I add the line before first it gives me this:

==> Zaczynam build()
patching file backend/src/cnij_backend_common.c
patching file cngpijmon/src/bjcupsmon_cups.c
......... libs
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:11: installing './config.guess'
configure.in:11: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
Makefile.am: installing './COPYING' using GNU General Public License v3 file
Makefile.am:     Consider adding the COPYING file to the version control system
Makefile.am:     for your code, to avoid questions about which license your project uses
configure.in:4: error: required file 'config.h.in' not found
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
buftool/Makefile.am: installing './depcomp'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
configure: WARNING: unrecognized options: --enable-progpath
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for dup2... yes
checking for memset... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: error: cannot find input file: `Makefile.in'
==> BŁĄD: Wystąpił błąd w build().
    Przerywam...
==> ERROR: Makepkg was unable to build cups-canon-3.00.

If before both:

==> Zaczynam build()
patching file backend/src/cnij_backend_common.c
patching file cngpijmon/src/bjcupsmon_cups.c
......... libs
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:4: error: required file 'config.h.in' not found
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
configure: WARNING: unrecognized options: --enable-progpath
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for dup2... yes
checking for memset... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: error: cannot find input file: `Makefile.in'
==> BŁĄD: Wystąpił błąd w build().
    Przerywam...
==> ERROR: Makepkg was unable to build cups-canon-3.00.

And before only second:

==> Zaczynam build()
patching file backend/src/cnij_backend_common.c
patching file cngpijmon/src/bjcupsmon_cups.c
......... libs
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:4: error: 'AM_CONFIG_HEADER': this macro is obsolete.
    You should use the 'AC_CONFIG_HEADERS' macro instead.
/usr/share/aclocal-1.13/obsolete-err.m4:12: AM_CONFIG_HEADER is expanded from...
configure.in:4: the top level
autom4te: /usr/bin/m4 failed with exit status: 1
aclocal: error: echo failed with exit status: 1
Running autoheader...
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
configure: WARNING: unrecognized options: --enable-progpath
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for dup2... yes
checking for memset... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating buftool/Makefile
config.status: creating paramlist/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --enable-progpath
Now type `make' to compile buftool
make  all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
Making all in paramlist
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
/bin/sh ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c -o paramlist.lo paramlist.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c paramlist.c  -fPIC -DPIC -o .libs/paramlist.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c paramlist.c -o paramlist.o >/dev/null 2>&1
mv -f .deps/paramlist.Tpo .deps/paramlist.Plo
/bin/sh ../libtool  --tag=CC   --mode=link gcc -O2 -Wall -O2  -Wl,-O1,--sort-common,--as-needed,-z,relro -o libparamlist.la  paramlist.lo  
libtool: link: ar cru .libs/libparamlist.a .libs/paramlist.o 
libtool: link: ranlib .libs/libparamlist.a
libtool: link: ( cd ".libs" && rm -f "libparamlist.la" && ln -s "../libparamlist.la" "libparamlist.la" )
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
Making all in buftool
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
gcc -DHAVE_CONFIG_H -I. -I..     -O2 -MT buftool.o -MD -MP -MF .deps/buftool.Tpo -c -o buftool.o buftool.c
mv -f .deps/buftool.Tpo .deps/buftool.Po
gcc -DHAVE_CONFIG_H -I. -I..     -O2 -MT buflist.o -MD -MP -MF .deps/buflist.Tpo -c -o buflist.o buflist.c
mv -f .deps/buflist.Tpo .deps/buflist.Po
rm -f libbuftool.a
ar cru libbuftool.a buftool.o buflist.o 
ranlib libbuftool.a
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
Making install in paramlist
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
Making install in buftool
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
......... cngpij
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:4: error: 'AM_CONFIG_HEADER': this macro is obsolete.
    You should use the 'AC_CONFIG_HEADERS' macro instead.
/usr/share/aclocal-1.13/obsolete-err.m4:12: AM_CONFIG_HEADER is expanded from...
configure.in:4: the top level
autom4te: /usr/bin/m4 failed with exit status: 1
aclocal: error: echo failed with exit status: 1
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader: 
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader: 
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:             [Define if a function `main' is needed.])
autoheader: 
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
autoheader: error: AC_CONFIG_HEADERS not found in configure.in
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in: error: no proper invocation of AM_INIT_AUTOMAKE was found.
configure.in: You should verify that configure.in invokes AM_INIT_AUTOMAKE,
configure.in: that aclocal.m4 is present in the top-level directory,
configure.in: and that aclocal.m4 was recently regenerated (using aclocal)
configure.in:18: installing './install-sh'
cngpij/Makefile.am: installing './depcomp'
/usr/share/automake-1.13/am/depend2.am: error: am__fastdepCC does not appear in AM_CONDITIONAL
/usr/share/automake-1.13/am/depend2.am:   The usual way to define 'am__fastdepCC' is to add 'AC_PROG_CC'
/usr/share/automake-1.13/am/depend2.am:   to 'configure.in' and run 'aclocal' and 'autoconf' again
/usr/share/automake-1.13/am/depend2.am: error: AMDEP does not appear in AM_CONDITIONAL
/usr/share/automake-1.13/am/depend2.am:   The usual way to define 'AMDEP' is to add one of the compiler tests
/usr/share/automake-1.13/am/depend2.am:     AC_PROG_CC, AC_PROG_CXX, AC_PROG_OBJC, AC_PROG_OBJCXX,
/usr/share/automake-1.13/am/depend2.am:     AM_PROG_AS, AM_PROG_GCJ, AM_PROG_UPC
/usr/share/automake-1.13/am/depend2.am:   to 'configure.in' and run 'aclocal' and 'autoconf' again
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoconf ...
configure.in:2: error: possibly undefined macro: AM_INIT_AUTOMAKE
      If this token and others are legitimate, please use m4_pattern_allow.
      See the Autoconf documentation.
configure.in:4: error: possibly undefined macro: AM_CONFIG_HEADER
configure.in:20: error: possibly undefined macro: AM_PROG_LIBTOOL
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
./configure: line 2189: syntax error near unexpected token `cngpij,'
./configure: line 2189: `AM_INIT_AUTOMAKE(cngpij, 3.00-1)'
==> BŁĄD: Wystąpił błąd w build().
    Przerywam...
==> ERROR: Makepkg was unable to build cups-canon-3.00.

Base-devel installed.

Last edited by Kierek (2013-02-20 19:14:04)

Scimmia · 2013-02-20 19:50:18

Forget the second loop for now, you're not even making it through the first iteration of the first loop. Add autogen.sh to the end of that sed command.

sed -i 's/AM_CONFIG_HEADER/AC_CONFIG_HEADERS/g' configure.in autogen.sh

Don't forget to delete the src directory after each try. We need to start with a fresh source dir to tell what's going on.

Edit: I just looked at the second loop. It will need:

sed -i 's/AM_CONFIG_HEADER/AC_CONFIG_HEADERS/g' configures/configure.in.new autogen.sh

before the ./autogen.sh command.

Last edited by Scimmia (2013-02-20 20:08:25)

Kierek · 2013-02-20 20:18:00

It looks like this time it changed something so I gave it two tries again:

Before 1st autogen:

==> Zaczynam build()
patching file backend/src/cnij_backend_common.c
patching file cngpijmon/src/bjcupsmon_cups.c
......... libs
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:11: installing './config.guess'
configure.in:11: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
Makefile.am: installing './COPYING' using GNU General Public License v3 file
Makefile.am:     Consider adding the COPYING file to the version control system
Makefile.am:     for your code, to avoid questions about which license your project uses
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
buftool/Makefile.am: installing './depcomp'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
configure: WARNING: unrecognized options: --enable-progpath
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for dup2... yes
checking for memset... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating buftool/Makefile
config.status: creating paramlist/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --enable-progpath
Now type `make' to compile buftool
make  all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
Making all in paramlist
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
/bin/sh ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c -o paramlist.lo paramlist.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c paramlist.c  -fPIC -DPIC -o .libs/paramlist.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c paramlist.c -o paramlist.o >/dev/null 2>&1
mv -f .deps/paramlist.Tpo .deps/paramlist.Plo
/bin/sh ../libtool  --tag=CC   --mode=link gcc -O2 -Wall -O2  -Wl,-O1,--sort-common,--as-needed,-z,relro -o libparamlist.la  paramlist.lo  
libtool: link: ar cru .libs/libparamlist.a .libs/paramlist.o 
libtool: link: ranlib .libs/libparamlist.a
libtool: link: ( cd ".libs" && rm -f "libparamlist.la" && ln -s "../libparamlist.la" "libparamlist.la" )
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
Making all in buftool
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
gcc -DHAVE_CONFIG_H -I. -I..     -O2 -MT buftool.o -MD -MP -MF .deps/buftool.Tpo -c -o buftool.o buftool.c
mv -f .deps/buftool.Tpo .deps/buftool.Po
gcc -DHAVE_CONFIG_H -I. -I..     -O2 -MT buflist.o -MD -MP -MF .deps/buflist.Tpo -c -o buflist.o buflist.c
mv -f .deps/buflist.Tpo .deps/buflist.Po
rm -f libbuftool.a
ar cru libbuftool.a buftool.o buflist.o 
ranlib libbuftool.a
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
Making install in paramlist
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
Making install in buftool
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
......... cngpij
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader: 
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader: 
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:             [Define if a function `main' is needed.])
autoheader: 
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:20: installing './config.guess'
configure.in:20: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
cngpij/Makefile.am: installing './depcomp'
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for main in -lcups... yes
checking for main in -lparamlist... no
checking for main in -lpopt... yes
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for memset... yes
checking for socket... yes
checking for strdup... yes
checking for strrchr... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating cngpij/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
Now type `make' to compile
make  all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
Making all in cngpij
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -MT bjcups.o -MD -MP -MF .deps/bjcups.Tpo -c -o bjcups.o bjcups.c
mv -f .deps/bjcups.Tpo .deps/bjcups.Po
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -MT getipc.o -MD -MP -MF .deps/getipc.Tpo -c -o getipc.o getipc.c
getipc.c: In function ‘GetIPCData’:
getipc.c:63:48: warning: passing argument 3 of ‘accept’ from incompatible pointer type [enabled by default]
In file included from /usr/include/netinet/in.h:24:0,
                 from /usr/include/arpa/inet.h:22,
                 from getipc.c:21:
/usr/include/sys/socket.h:244:12: note: expected ‘socklen_t * __restrict__’ but argument is of type ‘size_t *’
mv -f .deps/getipc.Tpo .deps/getipc.Po
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -MT bjutil.o -MD -MP -MF .deps/bjutil.Tpo -c -o bjutil.o bjutil.c
mv -f .deps/bjutil.Tpo .deps/bjutil.Po
/bin/sh ../libtool  --tag=CC   --mode=link gcc -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -L../../libs/paramlist -Wl,-O1,--sort-common,--as-needed,-z,relro -o cngpij bjcups.o getipc.o bjutil.o -lpopt -lcups -lparamlist  -lpopt -lcups 
libtool: link: gcc -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o cngpij bjcups.o getipc.o bjutil.o  -L../../libs/paramlist /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist/.libs/libparamlist.a -lpopt -lcups
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
Making install in cngpij
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
 /usr/bin/mkdir -p '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/bin'
  /bin/sh ../libtool   --mode=install /usr/bin/install -c cngpij '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/bin'
libtool: install: /usr/bin/install -c cngpij /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/bin/cngpij
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
......... pstocanonij
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
libtoolize: `AC_PROG_RANLIB' is rendered obsolete by `LT_INIT'
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader: 
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader: 
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:             [Define if a function `main' is needed.])
autoheader: 
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:22: installing './config.guess'
configure.in:22: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
filter/Makefile.am: installing './depcomp'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking for ranlib... ranlib
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... (cached) ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for main in -lcups... yes
checking for main in -lparamlist... no
checking for main in -lpopt... yes
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for dup2... yes
checking for memset... yes
checking for socket... yes
checking for strdup... yes
checking for strrchr... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating filter/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
Now type `make' to compile
make  all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
Making all in filter
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../../libs/buftool -O2 -MT pstocanonij.o -MD -MP -MF .deps/pstocanonij.Tpo -c -o pstocanonij.o pstocanonij.c
pstocanonij.c: In function ‘get_ps_params’:
pstocanonij.c:249:3: warning: pointer targets in passing argument 1 of ‘buflist_new’ differ in signedness [-Wpointer-sign]
In file included from pstocanonij.c:35:0:
../../libs/buftool/buflist.h:38:10: note: expected ‘unsigned char *’ but argument is of type ‘char *’
pstocanonij.c:299:5: warning: value computed is not used [-Wunused-value]
pstocanonij.c:385:3: warning: pointer targets in passing argument 1 of ‘buflist_new’ differ in signedness [-Wpointer-sign]
In file included from pstocanonij.c:35:0:
../../libs/buftool/buflist.h:38:10: note: expected ‘unsigned char *’ but argument is of type ‘char *’
pstocanonij.c: In function ‘make_cmd_param’:
pstocanonij.c:905:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c:906:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c:935:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c:936:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c: In function ‘exec_filter’:
pstocanonij.c:1133:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
mv -f .deps/pstocanonij.Tpo .deps/pstocanonij.Po
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../../libs/buftool -O2 -MT canonopt.o -MD -MP -MF .deps/canonopt.Tpo -c -o canonopt.o canonopt.c
mv -f .deps/canonopt.Tpo .deps/canonopt.Po
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../../libs/buftool -O2 -MT paramlist.o -MD -MP -MF .deps/paramlist.Tpo -c -o paramlist.o paramlist.c
mv -f .deps/paramlist.Tpo .deps/paramlist.Po
/bin/sh ../libtool  --tag=CC   --mode=link gcc -O2 -Wall -I../../libs/buftool -O2 -L../../libs/buftool -Wl,-O1,--sort-common,--as-needed,-z,relro -o pstocanonij pstocanonij.o canonopt.o paramlist.o -lcups ../../libs/buftool/libbuftool.a -lpopt -lcups 
libtool: link: gcc -O2 -Wall -I../../libs/buftool -O2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o pstocanonij pstocanonij.o canonopt.o paramlist.o  -L../../libs/buftool ../../libs/buftool/libbuftool.a -lpopt -lcups
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
Making install in filter
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
 /usr/bin/mkdir -p '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/filter'
  /bin/sh ../libtool   --mode=install /usr/bin/install -c pstocanonij '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/filter'
libtool: install: /usr/bin/install -c pstocanonij /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/filter/pstocanonij
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
......... backend
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader: 
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader: 
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:             [Define if a function `main' is needed.])
autoheader: 
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:19: installing './config.guess'
configure.in:19: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
src/Makefile.am: installing './depcomp'
src/Makefile.am:10: warning: 'CFLAGS' is a user variable, you should not override it;
src/Makefile.am:10: use 'AM_CFLAGS' instead
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for main in -lcups... yes
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for memset... yes
checking for socket... yes
checking for strdup... yes
checking for strrchr... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
Now type `make' to compile
make  all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
Making all in src
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
gcc -DHAVE_CONFIG_H -I. -I..     -O2 -Wall -MT cnij_backend_common.o -MD -MP -MF .deps/cnij_backend_common.Tpo -c -o cnij_backend_common.o cnij_backend_common.c
mv -f .deps/cnij_backend_common.Tpo .deps/cnij_backend_common.Po
gcc -DHAVE_CONFIG_H -I. -I..     -O2 -Wall -MT cnij_usb.o -MD -MP -MF .deps/cnij_usb.Tpo -c -o cnij_usb.o cnij_usb.c
cnij_usb.c: In function ‘main’:
cnij_usb.c:97:7: warning: unused variable ‘port’ [-Wunused-variable]
cnij_usb.c:94:4: warning: unused variable ‘username’ [-Wunused-variable]
cnij_usb.c:93:4: warning: unused variable ‘hostname’ [-Wunused-variable]
cnij_usb.c:92:7: warning: unused variable ‘method’ [-Wunused-variable]
mv -f .deps/cnij_usb.Tpo .deps/cnij_usb.Po
/bin/sh ../libtool  --tag=CC   --mode=link gcc  -O2 -Wall  -Wl,-O1,--sort-common,--as-needed,-z,relro -o cnijusb cnij_backend_common.o cnij_usb.o -lcups -lcups 
libtool: link: gcc -O2 -Wall -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o cnijusb cnij_backend_common.o cnij_usb.o  -lcups
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
Making install in src
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
 /usr/bin/mkdir -p '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/backend'
  /bin/sh ../libtool   --mode=install /usr/bin/install -c cnijusb '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/backend'
libtool: install: /usr/bin/install -c cnijusb /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/backend/cnijusb
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
..........
. ip1900
..........
.......... lgmon
processing .
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:12: error: 'AM_CONFIG_HEADER': this macro is obsolete.
    You should use the 'AC_CONFIG_HEADERS' macro instead.
/usr/share/aclocal-1.13/obsolete-err.m4:12: AM_CONFIG_HEADER is expanded from...
configure.in:12: the top level
autom4te: /usr/bin/m4 failed with exit status: 1
aclocal: error: echo failed with exit status: 1
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader: 
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader: 
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:             [Define if a function `main' is needed.])
autoheader: 
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
autoheader: error: AC_CONFIG_HEADERS not found in configure.in
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in: error: no proper invocation of AM_INIT_AUTOMAKE was found.
configure.in: You should verify that configure.in invokes AM_INIT_AUTOMAKE,
configure.in: that aclocal.m4 is present in the top-level directory,
configure.in: and that aclocal.m4 was recently regenerated (using aclocal)
src/Makefile.am:3: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
src/Makefile.am: installing './depcomp'
/usr/share/automake-1.13/am/depend2.am: error: am__fastdepCC does not appear in AM_CONDITIONAL
/usr/share/automake-1.13/am/depend2.am:   The usual way to define 'am__fastdepCC' is to add 'AC_PROG_CC'
/usr/share/automake-1.13/am/depend2.am:   to 'configure.in' and run 'aclocal' and 'autoconf' again
/usr/share/automake-1.13/am/depend2.am: error: AMDEP does not appear in AM_CONDITIONAL
/usr/share/automake-1.13/am/depend2.am:   The usual way to define 'AMDEP' is to add one of the compiler tests
/usr/share/automake-1.13/am/depend2.am:     AC_PROG_CC, AC_PROG_CXX, AC_PROG_OBJC, AC_PROG_OBJCXX,
/usr/share/automake-1.13/am/depend2.am:     AM_PROG_AS, AM_PROG_GCJ, AM_PROG_UPC
/usr/share/automake-1.13/am/depend2.am:   to 'configure.in' and run 'aclocal' and 'autoconf' again
Running autoconf ...
configure.in:11: error: possibly undefined macro: AM_INIT_AUTOMAKE
      If this token and others are legitimate, please use m4_pattern_allow.
      See the Autoconf documentation.
configure.in:12: error: possibly undefined macro: AM_CONFIG_HEADER
configure.in:27: error: possibly undefined macro: AM_PROG_CC_STDC
configure.in:31: error: possibly undefined macro: AM_PATH_GTK_2_0
Running ./configure --prefix=/usr --enable-libpath=/usr/lib/bjlib --enable-binpath=/usr/bin --enable-progpath=/usr/bin --program-suffix=ip1900 ...
configure: WARNING: unrecognized options: --enable-libpath, --enable-binpath
./configure: line 1886: syntax error near unexpected token `lgmon{program_suffix},'
./configure: line 1886: `AM_INIT_AUTOMAKE(lgmon{program_suffix}, 3.00-1)'
==> BŁĄD: Wystąpił błąd w build().
    Przerywam...

Before both:

==> Zaczynam build()
patching file backend/src/cnij_backend_common.c
patching file cngpijmon/src/bjcupsmon_cups.c
......... libs
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:11: installing './config.guess'
configure.in:11: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
Makefile.am: installing './COPYING' using GNU General Public License v3 file
Makefile.am:     Consider adding the COPYING file to the version control system
Makefile.am:     for your code, to avoid questions about which license your project uses
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
buftool/Makefile.am: installing './depcomp'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
configure: WARNING: unrecognized options: --enable-progpath
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for dup2... yes
checking for memset... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating buftool/Makefile
config.status: creating paramlist/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --enable-progpath
Now type `make' to compile buftool
make  all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
Making all in paramlist
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
/bin/sh ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c -o paramlist.lo paramlist.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c paramlist.c  -fPIC -DPIC -o .libs/paramlist.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c paramlist.c -o paramlist.o >/dev/null 2>&1
mv -f .deps/paramlist.Tpo .deps/paramlist.Plo
/bin/sh ../libtool  --tag=CC   --mode=link gcc -O2 -Wall -O2  -Wl,-O1,--sort-common,--as-needed,-z,relro -o libparamlist.la  paramlist.lo  
libtool: link: ar cru .libs/libparamlist.a .libs/paramlist.o 
libtool: link: ranlib .libs/libparamlist.a
libtool: link: ( cd ".libs" && rm -f "libparamlist.la" && ln -s "../libparamlist.la" "libparamlist.la" )
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
Making all in buftool
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
gcc -DHAVE_CONFIG_H -I. -I..     -O2 -MT buftool.o -MD -MP -MF .deps/buftool.Tpo -c -o buftool.o buftool.c
mv -f .deps/buftool.Tpo .deps/buftool.Po
gcc -DHAVE_CONFIG_H -I. -I..     -O2 -MT buflist.o -MD -MP -MF .deps/buflist.Tpo -c -o buflist.o buflist.c
mv -f .deps/buflist.Tpo .deps/buflist.Po
rm -f libbuftool.a
ar cru libbuftool.a buftool.o buflist.o 
ranlib libbuftool.a
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
Making install in paramlist
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
Making install in buftool
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
......... cngpij
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader: 
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader: 
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:             [Define if a function `main' is needed.])
autoheader: 
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:20: installing './config.guess'
configure.in:20: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
cngpij/Makefile.am: installing './depcomp'
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for main in -lcups... yes
checking for main in -lparamlist... no
checking for main in -lpopt... yes
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for memset... yes
checking for socket... yes
checking for strdup... yes
checking for strrchr... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating cngpij/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
Now type `make' to compile
make  all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
Making all in cngpij
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -MT bjcups.o -MD -MP -MF .deps/bjcups.Tpo -c -o bjcups.o bjcups.c
mv -f .deps/bjcups.Tpo .deps/bjcups.Po
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -MT getipc.o -MD -MP -MF .deps/getipc.Tpo -c -o getipc.o getipc.c
getipc.c: In function ‘GetIPCData’:
getipc.c:63:48: warning: passing argument 3 of ‘accept’ from incompatible pointer type [enabled by default]
In file included from /usr/include/netinet/in.h:24:0,
                 from /usr/include/arpa/inet.h:22,
                 from getipc.c:21:
/usr/include/sys/socket.h:244:12: note: expected ‘socklen_t * __restrict__’ but argument is of type ‘size_t *’
mv -f .deps/getipc.Tpo .deps/getipc.Po
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -MT bjutil.o -MD -MP -MF .deps/bjutil.Tpo -c -o bjutil.o bjutil.c
mv -f .deps/bjutil.Tpo .deps/bjutil.Po
/bin/sh ../libtool  --tag=CC   --mode=link gcc -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -L../../libs/paramlist -Wl,-O1,--sort-common,--as-needed,-z,relro -o cngpij bjcups.o getipc.o bjutil.o -lpopt -lcups -lparamlist  -lpopt -lcups 
libtool: link: gcc -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o cngpij bjcups.o getipc.o bjutil.o  -L../../libs/paramlist /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist/.libs/libparamlist.a -lpopt -lcups
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
Making install in cngpij
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
 /usr/bin/mkdir -p '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/bin'
  /bin/sh ../libtool   --mode=install /usr/bin/install -c cngpij '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/bin'
libtool: install: /usr/bin/install -c cngpij /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/bin/cngpij
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
......... pstocanonij
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
libtoolize: `AC_PROG_RANLIB' is rendered obsolete by `LT_INIT'
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader: 
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader: 
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:             [Define if a function `main' is needed.])
autoheader: 
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:22: installing './config.guess'
configure.in:22: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
filter/Makefile.am: installing './depcomp'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking for ranlib... ranlib
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... (cached) ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for main in -lcups... yes
checking for main in -lparamlist... no
checking for main in -lpopt... yes
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for dup2... yes
checking for memset... yes
checking for socket... yes
checking for strdup... yes
checking for strrchr... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating filter/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
Now type `make' to compile
make  all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
Making all in filter
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../../libs/buftool -O2 -MT pstocanonij.o -MD -MP -MF .deps/pstocanonij.Tpo -c -o pstocanonij.o pstocanonij.c
pstocanonij.c: In function ‘get_ps_params’:
pstocanonij.c:249:3: warning: pointer targets in passing argument 1 of ‘buflist_new’ differ in signedness [-Wpointer-sign]
In file included from pstocanonij.c:35:0:
../../libs/buftool/buflist.h:38:10: note: expected ‘unsigned char *’ but argument is of type ‘char *’
pstocanonij.c:299:5: warning: value computed is not used [-Wunused-value]
pstocanonij.c:385:3: warning: pointer targets in passing argument 1 of ‘buflist_new’ differ in signedness [-Wpointer-sign]
In file included from pstocanonij.c:35:0:
../../libs/buftool/buflist.h:38:10: note: expected ‘unsigned char *’ but argument is of type ‘char *’
pstocanonij.c: In function ‘make_cmd_param’:
pstocanonij.c:905:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c:906:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c:935:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c:936:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c: In function ‘exec_filter’:
pstocanonij.c:1133:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
mv -f .deps/pstocanonij.Tpo .deps/pstocanonij.Po
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../../libs/buftool -O2 -MT canonopt.o -MD -MP -MF .deps/canonopt.Tpo -c -o canonopt.o canonopt.c
mv -f .deps/canonopt.Tpo .deps/canonopt.Po
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../../libs/buftool -O2 -MT paramlist.o -MD -MP -MF .deps/paramlist.Tpo -c -o paramlist.o paramlist.c
mv -f .deps/paramlist.Tpo .deps/paramlist.Po
/bin/sh ../libtool  --tag=CC   --mode=link gcc -O2 -Wall -I../../libs/buftool -O2 -L../../libs/buftool -Wl,-O1,--sort-common,--as-needed,-z,relro -o pstocanonij pstocanonij.o canonopt.o paramlist.o -lcups ../../libs/buftool/libbuftool.a -lpopt -lcups 
libtool: link: gcc -O2 -Wall -I../../libs/buftool -O2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o pstocanonij pstocanonij.o canonopt.o paramlist.o  -L../../libs/buftool ../../libs/buftool/libbuftool.a -lpopt -lcups
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
Making install in filter
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
 /usr/bin/mkdir -p '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/filter'
  /bin/sh ../libtool   --mode=install /usr/bin/install -c pstocanonij '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/filter'
libtool: install: /usr/bin/install -c pstocanonij /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/filter/pstocanonij
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
......... backend
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader: 
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader: 
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:             [Define if a function `main' is needed.])
autoheader: 
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:19: installing './config.guess'
configure.in:19: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
src/Makefile.am: installing './depcomp'
src/Makefile.am:10: warning: 'CFLAGS' is a user variable, you should not override it;
src/Makefile.am:10: use 'AM_CFLAGS' instead
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for main in -lcups... yes
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for memset... yes
checking for socket... yes
checking for strdup... yes
checking for strrchr... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
Now type `make' to compile
make  all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
Making all in src
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
gcc -DHAVE_CONFIG_H -I. -I..     -O2 -Wall -MT cnij_backend_common.o -MD -MP -MF .deps/cnij_backend_common.Tpo -c -o cnij_backend_common.o cnij_backend_common.c
mv -f .deps/cnij_backend_common.Tpo .deps/cnij_backend_common.Po
gcc -DHAVE_CONFIG_H -I. -I..     -O2 -Wall -MT cnij_usb.o -MD -MP -MF .deps/cnij_usb.Tpo -c -o cnij_usb.o cnij_usb.c
cnij_usb.c: In function ‘main’:
cnij_usb.c:97:7: warning: unused variable ‘port’ [-Wunused-variable]
cnij_usb.c:94:4: warning: unused variable ‘username’ [-Wunused-variable]
cnij_usb.c:93:4: warning: unused variable ‘hostname’ [-Wunused-variable]
cnij_usb.c:92:7: warning: unused variable ‘method’ [-Wunused-variable]
mv -f .deps/cnij_usb.Tpo .deps/cnij_usb.Po
/bin/sh ../libtool  --tag=CC   --mode=link gcc  -O2 -Wall  -Wl,-O1,--sort-common,--as-needed,-z,relro -o cnijusb cnij_backend_common.o cnij_usb.o -lcups -lcups 
libtool: link: gcc -O2 -Wall -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o cnijusb cnij_backend_common.o cnij_usb.o  -lcups
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
Making install in src
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
 /usr/bin/mkdir -p '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/backend'
  /bin/sh ../libtool   --mode=install /usr/bin/install -c cnijusb '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/backend'
libtool: install: /usr/bin/install -c cnijusb /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/backend/cnijusb
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
..........
. ip1900
..........
.......... lgmon
sed: nie można odczytać configure.in: Nie ma takiego pliku ani katalogu
==> BŁĄD: Wystąpił błąd w build().
    Przerywam...

Scimmia · 2013-02-20 20:21:25

notice my edit, the second loop needs a slightly different sed command.

Good news, though, is that you're making it completely through the first loop now!

Last edited by Scimmia (2013-02-20 20:22:10)

Kierek · 2013-02-20 20:31:33

Good to hear that we are making some progress

After using both commands:

==> Zaczynam build()
patching file backend/src/cnij_backend_common.c
patching file cngpijmon/src/bjcupsmon_cups.c
......... libs
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:11: installing './config.guess'
configure.in:11: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
Makefile.am: installing './COPYING' using GNU General Public License v3 file
Makefile.am:     Consider adding the COPYING file to the version control system
Makefile.am:     for your code, to avoid questions about which license your project uses
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
buftool/Makefile.am: installing './depcomp'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
configure: WARNING: unrecognized options: --enable-progpath
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for dup2... yes
checking for memset... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating buftool/Makefile
config.status: creating paramlist/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
configure: WARNING: unrecognized options: --enable-progpath
Now type `make' to compile buftool
make  all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
Making all in paramlist
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
/bin/sh ../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c -o paramlist.lo paramlist.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c paramlist.c  -fPIC -DPIC -o .libs/paramlist.o
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -Wall -O2 -MT paramlist.lo -MD -MP -MF .deps/paramlist.Tpo -c paramlist.c -o paramlist.o >/dev/null 2>&1
mv -f .deps/paramlist.Tpo .deps/paramlist.Plo
/bin/sh ../libtool  --tag=CC   --mode=link gcc -O2 -Wall -O2  -Wl,-O1,--sort-common,--as-needed,-z,relro -o libparamlist.la  paramlist.lo  
libtool: link: ar cru .libs/libparamlist.a .libs/paramlist.o 
libtool: link: ranlib .libs/libparamlist.a
libtool: link: ( cd ".libs" && rm -f "libparamlist.la" && ln -s "../libparamlist.la" "libparamlist.la" )
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
Making all in buftool
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
gcc -DHAVE_CONFIG_H -I. -I..     -O2 -MT buftool.o -MD -MP -MF .deps/buftool.Tpo -c -o buftool.o buftool.c
mv -f .deps/buftool.Tpo .deps/buftool.Po
gcc -DHAVE_CONFIG_H -I. -I..     -O2 -MT buflist.o -MD -MP -MF .deps/buflist.Tpo -c -o buflist.o buflist.c
mv -f .deps/buflist.Tpo .deps/buflist.Po
rm -f libbuftool.a
ar cru libbuftool.a buftool.o buflist.o 
ranlib libbuftool.a
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
Making install in paramlist
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist'
Making install in buftool
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/buftool'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs'
......... cngpij
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader: 
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader: 
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:             [Define if a function `main' is needed.])
autoheader: 
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:20: installing './config.guess'
configure.in:20: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
cngpij/Makefile.am: installing './depcomp'
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for main in -lcups... yes
checking for main in -lparamlist... no
checking for main in -lpopt... yes
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for memset... yes
checking for socket... yes
checking for strdup... yes
checking for strrchr... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating cngpij/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
Now type `make' to compile
make  all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
Making all in cngpij
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -MT bjcups.o -MD -MP -MF .deps/bjcups.Tpo -c -o bjcups.o bjcups.c
mv -f .deps/bjcups.Tpo .deps/bjcups.Po
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -MT getipc.o -MD -MP -MF .deps/getipc.Tpo -c -o getipc.o getipc.c
getipc.c: In function ‘GetIPCData’:
getipc.c:63:48: warning: passing argument 3 of ‘accept’ from incompatible pointer type [enabled by default]
In file included from /usr/include/netinet/in.h:24:0,
                 from /usr/include/arpa/inet.h:22,
                 from getipc.c:21:
/usr/include/sys/socket.h:244:12: note: expected ‘socklen_t * __restrict__’ but argument is of type ‘size_t *’
mv -f .deps/getipc.Tpo .deps/getipc.Po
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -MT bjutil.o -MD -MP -MF .deps/bjutil.Tpo -c -o bjutil.o bjutil.c
mv -f .deps/bjutil.Tpo .deps/bjutil.Po
/bin/sh ../libtool  --tag=CC   --mode=link gcc -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -L../../libs/paramlist -Wl,-O1,--sort-common,--as-needed,-z,relro -o cngpij bjcups.o getipc.o bjutil.o -lpopt -lcups -lparamlist  -lpopt -lcups 
libtool: link: gcc -O2 -Wall -I../include/cncl -I../include/misc -I../../libs/paramlist -O2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o cngpij bjcups.o getipc.o bjutil.o  -L../../libs/paramlist /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/libs/paramlist/.libs/libparamlist.a -lpopt -lcups
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
Making install in cngpij
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
 /usr/bin/mkdir -p '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/bin'
  /bin/sh ../libtool   --mode=install /usr/bin/install -c cngpij '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/bin'
libtool: install: /usr/bin/install -c cngpij /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/bin/cngpij
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij/cngpij'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/cngpij'
......... pstocanonij
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
libtoolize: `AC_PROG_RANLIB' is rendered obsolete by `LT_INIT'
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader: 
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader: 
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:             [Define if a function `main' is needed.])
autoheader: 
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:22: installing './config.guess'
configure.in:22: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
filter/Makefile.am: installing './depcomp'
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking for ranlib... ranlib
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... (cached) ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for main in -lcups... yes
checking for main in -lparamlist... no
checking for main in -lpopt... yes
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for dup2... yes
checking for memset... yes
checking for socket... yes
checking for strdup... yes
checking for strrchr... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating filter/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
Now type `make' to compile
make  all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
Making all in filter
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../../libs/buftool -O2 -MT pstocanonij.o -MD -MP -MF .deps/pstocanonij.Tpo -c -o pstocanonij.o pstocanonij.c
pstocanonij.c: In function ‘get_ps_params’:
pstocanonij.c:249:3: warning: pointer targets in passing argument 1 of ‘buflist_new’ differ in signedness [-Wpointer-sign]
In file included from pstocanonij.c:35:0:
../../libs/buftool/buflist.h:38:10: note: expected ‘unsigned char *’ but argument is of type ‘char *’
pstocanonij.c:299:5: warning: value computed is not used [-Wunused-value]
pstocanonij.c:385:3: warning: pointer targets in passing argument 1 of ‘buflist_new’ differ in signedness [-Wpointer-sign]
In file included from pstocanonij.c:35:0:
../../libs/buftool/buflist.h:38:10: note: expected ‘unsigned char *’ but argument is of type ‘char *’
pstocanonij.c: In function ‘make_cmd_param’:
pstocanonij.c:905:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c:906:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c:935:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c:936:6: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘char (*)[256]’ [-Wformat]
pstocanonij.c: In function ‘exec_filter’:
pstocanonij.c:1133:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
mv -f .deps/pstocanonij.Tpo .deps/pstocanonij.Po
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../../libs/buftool -O2 -MT canonopt.o -MD -MP -MF .deps/canonopt.Tpo -c -o canonopt.o canonopt.c
mv -f .deps/canonopt.Tpo .deps/canonopt.Po
gcc -DHAVE_CONFIG_H -I. -I..    -O2 -Wall -I../../libs/buftool -O2 -MT paramlist.o -MD -MP -MF .deps/paramlist.Tpo -c -o paramlist.o paramlist.c
mv -f .deps/paramlist.Tpo .deps/paramlist.Po
/bin/sh ../libtool  --tag=CC   --mode=link gcc -O2 -Wall -I../../libs/buftool -O2 -L../../libs/buftool -Wl,-O1,--sort-common,--as-needed,-z,relro -o pstocanonij pstocanonij.o canonopt.o paramlist.o -lcups ../../libs/buftool/libbuftool.a -lpopt -lcups 
libtool: link: gcc -O2 -Wall -I../../libs/buftool -O2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o pstocanonij pstocanonij.o canonopt.o paramlist.o  -L../../libs/buftool ../../libs/buftool/libbuftool.a -lpopt -lcups
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
Making install in filter
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
 /usr/bin/mkdir -p '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/filter'
  /bin/sh ../libtool   --mode=install /usr/bin/install -c pstocanonij '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/filter'
libtool: install: /usr/bin/install -c pstocanonij /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/filter/pstocanonij
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij/filter'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/pstocanonij'
......... backend
processing .
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader: 
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader: 
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:             [Define if a function `main' is needed.])
autoheader: 
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:2: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated.  For more info, see:
configure.in:2: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation
configure.in:19: installing './config.guess'
configure.in:19: installing './config.sub'
configure.in:2: installing './install-sh'
configure.in:2: installing './missing'
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
src/Makefile.am: installing './depcomp'
src/Makefile.am:10: warning: 'CFLAGS' is a user variable, you should not override it;
src/Makefile.am:10: use 'AM_CFLAGS' instead
Running autoconf ...
Running ./configure --prefix=/usr --enable-progpath=/usr/bin ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking whether make sets $(MAKE)... (cached) yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... no
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for main in -lcups... yes
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for stdlib.h... (cached) yes
checking for GNU libc compatible malloc... yes
checking for memset... yes
checking for socket... yes
checking for strdup... yes
checking for strrchr... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
Now type `make' to compile
make  all-recursive
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
Making all in src
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
gcc -DHAVE_CONFIG_H -I. -I..     -O2 -Wall -MT cnij_backend_common.o -MD -MP -MF .deps/cnij_backend_common.Tpo -c -o cnij_backend_common.o cnij_backend_common.c
mv -f .deps/cnij_backend_common.Tpo .deps/cnij_backend_common.Po
gcc -DHAVE_CONFIG_H -I. -I..     -O2 -Wall -MT cnij_usb.o -MD -MP -MF .deps/cnij_usb.Tpo -c -o cnij_usb.o cnij_usb.c
cnij_usb.c: In function ‘main’:
cnij_usb.c:97:7: warning: unused variable ‘port’ [-Wunused-variable]
cnij_usb.c:94:4: warning: unused variable ‘username’ [-Wunused-variable]
cnij_usb.c:93:4: warning: unused variable ‘hostname’ [-Wunused-variable]
cnij_usb.c:92:7: warning: unused variable ‘method’ [-Wunused-variable]
mv -f .deps/cnij_usb.Tpo .deps/cnij_usb.Po
/bin/sh ../libtool  --tag=CC   --mode=link gcc  -O2 -Wall  -Wl,-O1,--sort-common,--as-needed,-z,relro -o cnijusb cnij_backend_common.o cnij_usb.o -lcups -lcups 
libtool: link: gcc -O2 -Wall -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -o cnijusb cnij_backend_common.o cnij_usb.o  -lcups
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
Making install in src
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
 /usr/bin/mkdir -p '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/backend'
  /bin/sh ../libtool   --mode=install /usr/bin/install -c cnijusb '/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/backend'
libtool: install: /usr/bin/install -c cnijusb /tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/pkg/usr/lib/cups/backend/cnijusb
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend/src'
make[1]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[2]: Wejście do katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[2]: Nie ma nic do zrobienia w `install-exec-am'.
make[2]: Nie ma nic do zrobienia w `install-data-am'.
make[2]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
make[1]: Opuszczenie katalogu `/tmp/yaourt-tmp-kierek/aur-cups-canon-3.00/src/cnijfilter-common-3.00/backend'
..........
. ip1900
..........
.......... lgmon
processing .
Running aclocal  ...
aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in:27: error: 'AM_PROG_CC_STDC': this macro is obsolete.
    You should simply use the 'AC_PROG_CC' macro instead.
    Also, your code should no longer depend upon 'am_cv_prog_cc_stdc',
    but upon 'ac_cv_prog_cc_stdc'.
/usr/share/aclocal-1.13/obsolete-err.m4:17: AM_PROG_CC_STDC is expanded from...
configure.in:27: the top level
autom4te: /usr/bin/m4 failed with exit status: 1
aclocal: error: echo failed with exit status: 1
Running autoheader...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader: 
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader: 
autoheader: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader:             [Define if a function `main' is needed.])
autoheader: 
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
Running automake --gnu  ...
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
configure.in: error: no proper invocation of AM_INIT_AUTOMAKE was found.
configure.in: You should verify that configure.in invokes AM_INIT_AUTOMAKE,
configure.in: that aclocal.m4 is present in the top-level directory,
configure.in: and that aclocal.m4 was recently regenerated (using aclocal)
src/Makefile.am:3: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
src/Makefile.am: installing './depcomp'
/usr/share/automake-1.13/am/depend2.am: error: am__fastdepCC does not appear in AM_CONDITIONAL
/usr/share/automake-1.13/am/depend2.am:   The usual way to define 'am__fastdepCC' is to add 'AC_PROG_CC'
/usr/share/automake-1.13/am/depend2.am:   to 'configure.in' and run 'aclocal' and 'autoconf' again
/usr/share/automake-1.13/am/depend2.am: error: AMDEP does not appear in AM_CONDITIONAL
/usr/share/automake-1.13/am/depend2.am:   The usual way to define 'AMDEP' is to add one of the compiler tests
/usr/share/automake-1.13/am/depend2.am:     AC_PROG_CC, AC_PROG_CXX, AC_PROG_OBJC, AC_PROG_OBJCXX,
/usr/share/automake-1.13/am/depend2.am:     AM_PROG_AS, AM_PROG_GCJ, AM_PROG_UPC
/usr/share/automake-1.13/am/depend2.am:   to 'configure.in' and run 'aclocal' and 'autoconf' again
Running autoconf ...
configure.in:11: error: possibly undefined macro: AM_INIT_AUTOMAKE
      If this token and others are legitimate, please use m4_pattern_allow.
      See the Autoconf documentation.
configure.in:27: error: possibly undefined macro: AM_PROG_CC_STDC
configure.in:31: error: possibly undefined macro: AM_PATH_GTK_2_0
Running ./configure --prefix=/usr --enable-libpath=/usr/lib/bjlib --enable-binpath=/usr/bin --enable-progpath=/usr/bin --program-suffix=ip1900 ...
configure: WARNING: unrecognized options: --enable-libpath, --enable-binpath
./configure: line 1886: syntax error near unexpected token `lgmon{program_suffix},'
./configure: line 1886: `AM_INIT_AUTOMAKE(lgmon{program_suffix}, 3.00-1)'
==> BŁĄD: Wystąpił błąd w build().
    Przerywam...

Scimmia · 2013-02-20 20:34:33

I should have seen that earlier. The second loop will need a second sed command along with the first:

sed -i '/AM_PROG_CC_STDC/d' configures/configure.in.new

Last edited by Scimmia (2013-02-20 20:34:49)

Kierek · 2013-02-20 20:42:22

It looks like it started compiling. log became HUGE so I'm not going to paste it here.

http://pastebin.com/tdm4XvtE

Last edited by Kierek (2013-02-20 20:44:28)

Scimmia · 2013-02-20 20:47:00

yeah, it gets through the first iteration of the subloop, but dies on the second iteration. It's a code error, though, not a build system error like we've been dealing with up to this point. Hopefully someone who knows more about coding than me will show up.

Kierek · 2013-02-21 16:41:32

Thanks, that you helped with what you could, I hope that someone else who could help further will appear.

Could you explain what exactly did we do?

Scimmia · 2013-02-21 16:50:09

lol, sure.

The AutoMake macro "AM_CONFIG_HEADER" is obsolete. It was depreciated in 2002 and replaced by "AC_CONFIG_HEADERS". AutoMake 1.13 finally removed it completely. Sed is a stream editor that lets you make changes to text streams. using the 's/foo/bar/' format replaces all instances of "foo" with "bar", so we replaced all instances of the old macro name with the new one.

The AutoMake macro "AM_PROG_CC_STDC" was also depreciated in 2002 and removed from AutoMake 1.13. It's functionality was merged into "AC_PROG_CC". Since the configure scripts were already calling AC_PROG_CC, all was had to do was remove the lines with the old one. '/foobar/d' deletes all lines that contain a match for "foobar".

aAXEe · 2013-11-01 14:07:47

Scimmia wrote:

[...] It's a code error, though, not a build system error like we've been dealing with up to this point. Hopefully someone who knows more about coding than me will show up.

I fixed the code error and updated the packet.

Unfortunately I am not familiar with the AutoMake system. Can somebody check whether the problems described above are still there?
On my system the build runs without errors but with some warnings. Here is the build log: http://paste.ubuntu.com/6341429/

Arch Linux

#1 2013-02-20 18:39:17

Could not build cups-canon-3.00 from AUR

#2 2013-02-20 18:57:55

Re: Could not build cups-canon-3.00 from AUR

#3 2013-02-20 19:13:31

Re: Could not build cups-canon-3.00 from AUR

#4 2013-02-20 19:50:18

Re: Could not build cups-canon-3.00 from AUR

#5 2013-02-20 20:18:00

Re: Could not build cups-canon-3.00 from AUR

#6 2013-02-20 20:21:25

Re: Could not build cups-canon-3.00 from AUR

#7 2013-02-20 20:31:33

Re: Could not build cups-canon-3.00 from AUR

#8 2013-02-20 20:34:33

Re: Could not build cups-canon-3.00 from AUR

#9 2013-02-20 20:42:22

Re: Could not build cups-canon-3.00 from AUR

#10 2013-02-20 20:47:00

Re: Could not build cups-canon-3.00 from AUR

#11 2013-02-21 16:41:32

Re: Could not build cups-canon-3.00 from AUR

#12 2013-02-21 16:50:09

Re: Could not build cups-canon-3.00 from AUR

#13 2013-11-01 14:07:47

Re: Could not build cups-canon-3.00 from AUR

Board footer