Can't use fullscreen mode in mplayer

theGunslinger · 2013-03-20 14:21:34

So I got an old gericom laptop and I put arch on it, everything seems to work ok but video. I can't seem to get fullscreen video with any player, it just creates black fill around the video when I try to go fullscreen. It uses a SiS video card.
So if anyone has any info on how to solve this or is it even possible, I'd appreciate it.

Gusar · 2013-03-20 14:59:21

Gericom Webshox Per4mance? I have one of those . 14.1'' display, 1024x768 resolution, SiS 650 graphics, 256MB ram

Obvious questions: Did you install xf86-video-sis? Is the player configured to use xv? Most SiS chips do not have 3d accel support in Linux, so gl output isn't available, but they do have a hardware overlay that xv can use for video playback. I used that a lot back in the day, S-video output to an old-school CRT TV to watch shows and movies.

theGunslinger · 2013-03-20 16:18:12

That's the one!
Yeah I have the video drivers. If I set the output to xv I can't even see the video, just the sound. If it's gl, I can see it, I can go fullscreen but it lags like hell...

also: [VO_XV] It seems there is no Xvideo support for your video card available.

Last edited by theGunslinger (2013-03-20 16:28:00)

Gusar · 2013-03-20 16:59:39

Hmm, weird. Install xorg-xvinfo and run it. Though I have the feeling it'll say "No Adaptors". But there should be one, this is the xvinfo from mine:

X-Video Extension version 2.2
screen #0
  Adaptor #0: "SIS 300/315/330 series Video Overlay"
    number of ports: 1
    port base: 62
    operations supported: PutImage 
    supported visuals:
      depth 24, visualID 0x21
    number of attributes: 20
      "XV_COLORKEY" (range 0 to 16777215)
              client settable attribute
              client gettable attribute (current value is 66046)
      "XV_BRIGHTNESS" (range -128 to 127)
              client settable attribute
              client gettable attribute (current value is 10)
      "XV_CONTRAST" (range 0 to 7)
              client settable attribute
              client gettable attribute (current value is 2)
      "XV_SATURATION" (range -7 to 7)
              client settable attribute
              client gettable attribute (current value is 0)
      "XV_HUE" (range -8 to 7)
              client settable attribute
              client gettable attribute (current value is 0)
      "XV_AUTOPAINT_COLORKEY" (range 0 to 1)
              client settable attribute
              client gettable attribute (current value is 1)
      "XV_SET_DEFAULTS" (range 0 to 0)
              client settable attribute
      "XV_TVXPOSITION" (range -32 to 32)
              client settable attribute
              client gettable attribute (current value is 0)
      "XV_TVYPOSITION" (range -32 to 32)
              client settable attribute
              client gettable attribute (current value is 0)
      "XV_GAMMA_RED" (range 100 to 10000)
              client settable attribute
              client gettable attribute (current value is 1000)
      "XV_GAMMA_GREEN" (range 100 to 10000)
              client settable attribute
              client gettable attribute (current value is 1000)
      "XV_GAMMA_BLUE" (range 100 to 10000)
              client settable attribute
              client gettable attribute (current value is 1000)
      "XV_DISABLE_GRAPHICS" (range 0 to 1)
              client settable attribute
              client gettable attribute (current value is 0)
      "XV_DISABLE_GRAPHICS_LR" (range 0 to 1)
              client settable attribute
              client gettable attribute (current value is 0)
      "XV_DISABLE_COLORKEY" (range 0 to 1)
              client settable attribute
              client gettable attribute (current value is 0)
      "XV_USE_CHROMAKEY" (range 0 to 1)
              client settable attribute
              client gettable attribute (current value is 0)
      "XV_INSIDE_CHROMAKEY" (range 0 to 1)
              client settable attribute
              client gettable attribute (current value is 0)
      "XV_CHROMAMIN" (range 0 to 16777215)
              client settable attribute
              client gettable attribute (current value is 66046)
      "XV_CHROMAMAX" (range 0 to 16777215)
              client settable attribute
              client gettable attribute (current value is 66047)
      "XV_SWITCHCRT" (range 0 to 1)
              client settable attribute
              client gettable attribute (current value is 1)
    maximum XvImage size: 1920 x 1088
    Number of image formats: 7
      id: 0x32595559 (YUY2)
        guid: 59555932-0000-0010-8000-00aa00389b71
        bits per pixel: 16
        number of planes: 1
        type: YUV (packed)
      id: 0x32315659 (YV12)
        guid: 59563132-0000-0010-8000-00aa00389b71
        bits per pixel: 12
        number of planes: 3
        type: YUV (planar)
      id: 0x59565955 (UYVY)
        guid: 55595659-0000-0010-8000-00aa00389b71
        bits per pixel: 16
        number of planes: 1
        type: YUV (packed)
      id: 0x30323449 (I420)
        guid: 49343230-0000-0010-8000-00aa00389b71
        bits per pixel: 12
        number of planes: 3
        type: YUV (planar)
      id: 0x35315652 (RV15)
        guid: 52563135-0000-0000-0000-000000000000
        bits per pixel: 16
        number of planes: 1
        type: RGB (packed)
        depth: 15
        red, green, blue masks: 0x7c00, 0x3e0, 0x1f
      id: 0x36315652 (RV16)
        guid: 52563136-0000-0000-0000-000000000000
        bits per pixel: 16
        number of planes: 1
        type: RGB (packed)
        depth: 16
        red, green, blue masks: 0xf800, 0x7e0, 0x1f
      id: 0x55595659 (YVYU)
        guid: 59565955-0000-0010-8000-00aa00389b71
        bits per pixel: 16
        number of planes: 1
        type: YUV (packed)

Post your /var/log/Xorg.0.log, you should have something like this in there:

[    30.391] (--) SIS(0): Hardware supports one video overlay

[    32.312] (--) SIS(0): Using Xv overlay by default on CRT2

Anyway, post the full log, maybe we'll find something interesting in there.

theGunslinger · 2013-03-20 17:18:29

X-Video Extension version 2.2
screen #0
 no adaptors present

Here's the Xorg log: http://www.4shared.com/file/sWK2eLND/log.html

Gusar · 2013-03-20 19:19:44

Please post the log directly here, I can't get it from that site.

theGunslinger · 2013-03-20 19:32:53

[ 10974.047] 
X.Org X Server 1.13.3
Release Date: 2013-03-07
[ 10974.047] X Protocol Version 11, Revision 0
[ 10974.047] Build Operating System: Linux 3.8.2-1-ARCH i686 
[ 10974.048] Current Operating System: Linux mephisto 3.8.3-2-ARCH #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013 i686
[ 10974.048] Kernel command line: root=/dev/sda3 ro ipv6.disable=1 vga=791 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux 
[ 10974.049] Build Date: 09 March 2013  08:50:11AM
[ 10974.049]  
[ 10974.049] Current version of pixman: 0.28.2
[ 10974.049] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[ 10974.049] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10974.051] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 20 16:15:47 2013
[ 10974.051] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 10974.052] (==) No Layout section.  Using the first Screen section.
[ 10974.052] (==) No screen section available. Using defaults.
[ 10974.052] (**) |-->Screen "Default Screen Section" (0)
[ 10974.052] (**) |   |-->Monitor "<default monitor>"
[ 10974.052] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[ 10974.052] (**) |   |-->Device "SiS graphics"
[ 10974.052] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[ 10974.052] (==) Automatically adding devices
[ 10974.052] (==) Automatically enabling devices
[ 10974.052] (==) Automatically adding GPU devices
[ 10974.052] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 10974.052] 	Entry deleted from font path.
[ 10974.052] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[ 10974.052] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10974.052] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10974.052] (II) Loader magic: 0x825a620
[ 10974.053] (II) Module ABI versions:
[ 10974.053] 	X.Org ANSI C Emulation: 0.4
[ 10974.053] 	X.Org Video Driver: 13.1
[ 10974.053] 	X.Org XInput driver : 18.0
[ 10974.053] 	X.Org Server Extension : 7.0
[ 10974.054] (--) PCI:*(0:1:0:0) 1039:6325:1584:5100 rev 0, Mem @ 0xd0000000/134217728, 0xdfee0000/131072, I/O @ 0x00009c00/128
[ 10974.055] Initializing built-in extension Generic Event Extension
[ 10974.055] Initializing built-in extension SHAPE
[ 10974.055] Initializing built-in extension MIT-SHM
[ 10974.056] Initializing built-in extension XInputExtension
[ 10974.056] Initializing built-in extension XTEST
[ 10974.056] Initializing built-in extension BIG-REQUESTS
[ 10974.056] Initializing built-in extension SYNC
[ 10974.056] Initializing built-in extension XKEYBOARD
[ 10974.056] Initializing built-in extension XC-MISC
[ 10974.057] Initializing built-in extension SECURITY
[ 10974.057] Initializing built-in extension XINERAMA
[ 10974.057] Initializing built-in extension XFIXES
[ 10974.057] Initializing built-in extension RENDER
[ 10974.057] Initializing built-in extension RANDR
[ 10974.057] Initializing built-in extension COMPOSITE
[ 10974.058] Initializing built-in extension DAMAGE
[ 10974.058] Initializing built-in extension MIT-SCREEN-SAVER
[ 10974.058] Initializing built-in extension DOUBLE-BUFFER
[ 10974.058] Initializing built-in extension RECORD
[ 10974.058] Initializing built-in extension DPMS
[ 10974.059] Initializing built-in extension X-Resource
[ 10974.059] Initializing built-in extension XVideo
[ 10974.059] Initializing built-in extension XVideo-MotionCompensation
[ 10974.059] Initializing built-in extension XFree86-VidModeExtension
[ 10974.059] Initializing built-in extension XFree86-DGA
[ 10974.060] Initializing built-in extension XFree86-DRI
[ 10974.060] Initializing built-in extension DRI2
[ 10974.060] (II) LoadModule: "glx"
[ 10974.060] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10974.061] (II) Module glx: vendor="X.Org Foundation"
[ 10974.061] 	compiled for 1.13.3, module version = 1.0.0
[ 10974.061] 	ABI class: X.Org Server Extension, version 7.0
[ 10974.061] (==) AIGLX enabled
[ 10974.061] Loading extension GLX
[ 10974.061] (II) LoadModule: "sis"
[ 10974.061] (II) Loading /usr/lib/xorg/modules/drivers/sis_drv.so
[ 10974.062] (II) Module sis: vendor="X.Org Foundation"
[ 10974.062] 	compiled for 1.13.0, module version = 0.10.7
[ 10974.062] 	Module class: X.Org Video Driver
[ 10974.062] 	ABI class: X.Org Video Driver, version 13.1
[ 10974.062] (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
	SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
	SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
	SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
	SIS340
[ 10974.062] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
	Volari V3XT/V5/V8/Duo (XG40)
[ 10974.062] (++) using VT number 1

[ 10974.062] (WW) Falling back to old probe method for sis
[ 10974.062] (--) Assigning device section with no busID to primary device
[ 10974.062] (--) Chipset SIS650/M650/651/740 found
[ 10974.063] (II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.13.0.0)
[ 10974.063] (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
[ 10974.063] (II) SIS(0): *** See http://www.winischhofer.eu/linuxsisvga.shtml
[ 10974.063] (II) SIS(0): *** for documentation and updates.
[ 10974.063] (--) SIS(0): sisfb not found
[ 10974.063] (--) SIS(0): Relocated I/O registers at 0x9C00
[ 10974.063] (II) Loading sub module "ramdac"
[ 10974.063] (II) LoadModule: "ramdac"
[ 10974.063] (II) Module "ramdac" already built-in
[ 10974.063] (II) SIS(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[ 10974.063] (==) SIS(0): Depth 24, (--) framebuffer bpp 32
[ 10974.063] (==) SIS(0): RGB weight 888
[ 10974.063] (==) SIS(0): Default visual is TrueColor
[ 10974.066] (--) SIS(0): Video BIOS version "1.10.6x" found (old SiS data layout)
[ 10974.066] (**) SIS(0): Option "ShadowFB" "true"
[ 10974.066] (==) SIS(0): Using HW cursor
[ 10974.066] (==) SIS(0): Color HW cursor is enabled
[ 10974.066] (II) SIS(0): Using VRAM command queue, size 512k
[ 10974.066] (==) SIS(0): Hotkey display switching is enabled
[ 10974.066] (II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
[ 10974.066] (II) SIS(0):          whether enabled or disabled. This is no driver bug.
[ 10974.066] (==) SIS(0): SiSCtrl utility interface is disabled
[ 10974.066] (II) SIS(0): For information on SiSCtrl, see
		http://www.winischhofer.eu/linuxsispart1.shtml#sisctrl
[ 10974.066] (**) SIS(0): Using "Shadow Framebuffer" - 2D acceleration disabled
[ 10974.066] (==) SIS(0): DRI disabled
[ 10974.066] (II) SIS(0): Checking OS for SSE support is not supported in this version of X.org
[ 10974.066] (II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on".
[ 10974.066] (--) SIS(0): DIMM0 is DDR SDRAM
[ 10974.067] (--) SIS(0): DIMM1 is DDR SDRAM
[ 10974.067] (--) SIS(0): DIMM2 is not installed
[ 10974.067] (--) SIS(0): DIMM3 is not installed
[ 10974.067] (--) SIS(0): DRAM type: DDR SDRAM
[ 10974.067] (--) SIS(0): Memory clock: 267.268 MHz
[ 10974.067] (--) SIS(0): DRAM bus width: 64 bit
[ 10974.067] (--) SIS(0): Linear framebuffer at 0xD0000000
[ 10974.067] (--) SIS(0): MMIO registers at 0xDFEE0000 (size 64K)
[ 10974.067] (--) SIS(0): VideoRAM: 32768 KB
[ 10974.067] (II) SIS(0): Using 32192K of framebuffer memory at offset 0K
[ 10974.067] (--) SIS(0): SiS650 revision ID 50 (650 A2 CA)
[ 10974.067] (--) SIS(0): Hardware supports one video overlay
[ 10974.067] (--) SIS(0): Detected SiS301LV video bridge (Charter/UMC-1, ID 1; Rev 0xd1)
[ 10975.658] (--) SIS(0): No CRT1/VGA detected
[ 10975.658] (--) SIS(0): Detected LCD/plasma panel (1024x768, 1, non-exp., RGB18 [12c300])
[ 10975.658] (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
[ 10975.658] (II) SIS(0): CRT1 gamma correction is enabled
[ 10975.658] (II) SIS(0): Separate Xv gamma correction for CRT1 is disabled
[ 10975.658] (II) SIS(0): CRT2 gamma correction is enabled
[ 10975.658] (--) SIS(0): Using Xv overlay by default on CRT2
[ 10975.658] (--) SIS(0): Memory bandwidth at 32 bpp is 534.536 MHz
[ 10975.658] (--) SIS(0): Detected LCD PanelDelayCompensation 0x03 (for LCD=CRT2)
[ 10975.658] (--) SIS(0): Detected LCD PanelDelayCompensation1 0x00 (for LCD=CRT1)
[ 10975.658] (II) Loading sub module "ddc"
[ 10975.658] (II) LoadModule: "ddc"
[ 10975.659] (II) Module "ddc" already built-in
[ 10975.659] (--) SIS(0): CRT2 DDC probing failed
[ 10975.659] (==) SIS(0): Min pixel clock is 10 MHz
[ 10975.659] (--) SIS(0): Max pixel clock is 340 MHz
[ 10975.659] (II) SIS(0): Replaced entire mode list with built-in modes
[ 10975.659] (II) SIS(0): Correcting missing CRT2 monitor HSync range
[ 10975.659] (II) SIS(0): Correcting missing CRT2 monitor VRefresh range
[ 10975.659] (II) SIS(0): "Unknown reason" in the following list means that the mode
[ 10975.659] (II) SIS(0): is not supported on the chipset/bridge/current output device.
[ 10975.659] (II) SIS(0): <default monitor>: Using hsync range of 30.00-80.00 kHz
[ 10975.659] (II) SIS(0): <default monitor>: Using vrefresh range of 59.00-61.00 Hz
[ 10975.659] (II) SIS(0): <default monitor>: Using vrefresh value of 71.00 Hz
[ 10975.659] (WW) SIS(0): Unable to estimate virtual size
[ 10975.659] (II) SIS(0): Clock range:  10.00 to 340.00 MHz
[ 10975.659] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "800x600" (hsync out of range)
[ 10975.659] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "640x480" (hsync out of range)
[ 10975.659] (II) SIS(0): Not using default mode "640x480" (hsync out of range)
[ 10975.659] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
[ 10975.659] (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
[ 10975.659] (II) SIS(0): Not using default mode "1024x768" (hsync out of range)
[ 10975.659] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[ 10975.660] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 10975.660] (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[ 10975.660] (II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
[ 10975.660] (II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
[ 10975.660] (II) SIS(0): Not using default mode "1024x576" (vrefresh out of range)
[ 10975.660] (II) SIS(0): Not using default mode "1024x576" (vrefresh out of range)
[ 10975.660] (II) SIS(0): Not using default mode "1280x720" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x720" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x720" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x960" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x960" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x768" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x768" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x768" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1400x1050" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1400x1050" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1152x864" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1152x864" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1152x864" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "848x480" (vrefresh out of range)
[ 10975.660] (II) SIS(0): Not using default mode "856x480" (vrefresh out of range)
[ 10975.660] (II) SIS(0): Not using default mode "1360x768" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1680x1050" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1920x1080" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x854" (unknown reason)
[ 10975.660] (II) SIS(0): Not using default mode "1280x854" (unknown reason)
[ 10975.661] (II) SIS(0): Not using default mode "1280x854" (unknown reason)
[ 10975.661] (--) SIS(0): Virtual size is 1024x768 (pitch 1024)
[ 10975.661] (**) SIS(0): *Default mode "1024x768" (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
[ 10975.661] (**) SIS(0): *Default mode "1024x576" (1024x576) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
[ 10975.661] (**) SIS(0): *Default mode "960x600" (960x600) (For CRT device: 41.5 MHz, 37.1 kHz, 60.0 Hz)
[ 10975.661] (**) SIS(0): *Default mode "960x540" (960x540) (For CRT device: 37.3 MHz, 33.8 kHz, 60.0 Hz)
[ 10975.661] (**) SIS(0): *Default mode "800x600" (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz)
[ 10975.661] (**) SIS(0): *Default mode "768x576" (768x576) (For CRT device: 35.0 MHz, 35.9 kHz, 60.1 Hz)
[ 10975.661] (**) SIS(0): *Default mode "720x576" (720x576) (For CRT device: 32.7 MHz, 35.9 kHz, 60.1 Hz)
[ 10975.661] (**) SIS(0): *Default mode "856x480" (856x480) (For CRT device: 33.9 MHz, 31.7 kHz, 59.8 Hz)
[ 10975.661] (**) SIS(0): *Default mode "848x480" (848x480) (For CRT device: 33.7 MHz, 31.0 kHz, 60.0 Hz)
[ 10975.661] (**) SIS(0): *Default mode "800x480" (800x480) (For CRT device: 39.8 MHz, 37.7 kHz, 60.0 Hz)
[ 10975.661] (**) SIS(0): *Default mode "720x480" (720x480) (For CRT device: 28.3 MHz, 31.6 kHz, 61.0 Hz)
[ 10975.661] (**) SIS(0): *Default mode "640x480" (640x480) (For CRT device: 25.1 MHz, 31.3 kHz, 59.7 Hz)
[ 10975.661] (**) SIS(0): *Default mode "640x400" (640x400) (For CRT device: 25.1 MHz, 31.6 kHz, 71.6 Hz)
[ 10975.661] (**) SIS(0): *Default mode "512x384" (512x384) (For CRT device: 32.6 MHz, 48.5 kHz, 60.1 Hz (D))
[ 10975.661] (**) SIS(0): *Default mode "400x300" (400x300) (For CRT device: 20.0 MHz, 37.9 kHz, 60.3 Hz (D))
[ 10975.661] (**) SIS(0): *Default mode "320x240" (320x240) (For CRT device: 12.5 MHz, 31.3 kHz, 60.7 Hz (D))
[ 10975.661] (**) SIS(0): *Default mode "320x200" (320x200) (For CRT device: 12.5 MHz, 31.3 kHz, 70.9 Hz (D))
[ 10975.661] (==) SIS(0): DPI set to (96, 96)
[ 10975.661] (II) Loading sub module "fb"
[ 10975.661] (II) LoadModule: "fb"
[ 10975.661] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10975.662] (II) Module fb: vendor="X.Org Foundation"
[ 10975.662] 	compiled for 1.13.3, module version = 1.0.0
[ 10975.662] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 10975.662] (II) Loading sub module "shadowfb"
[ 10975.662] (II) LoadModule: "shadowfb"
[ 10975.662] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 10975.662] (II) Module shadowfb: vendor="X.Org Foundation"
[ 10975.662] 	compiled for 1.13.3, module version = 1.0.0
[ 10975.662] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 10975.663] (--) Depth 24 pixmap format is 32 bpp
[ 10975.663] (II) Loading sub module "vbe"
[ 10975.663] (II) LoadModule: "vbe"
[ 10975.663] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 10975.663] (II) Module vbe: vendor="X.Org Foundation"
[ 10975.663] 	compiled for 1.13.3, module version = 1.1.0
[ 10975.663] 	ABI class: X.Org Video Driver, version 13.1
[ 10975.663] (II) Loading sub module "int10"
[ 10975.663] (II) LoadModule: "int10"
[ 10975.663] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 10975.664] (II) Module int10: vendor="X.Org Foundation"
[ 10975.664] 	compiled for 1.13.3, module version = 1.0.0
[ 10975.664] 	ABI class: X.Org Video Driver, version 13.1
[ 10975.664] (II) SIS(0): initializing int10
[ 10975.668] (II) SIS(0): Primary V_BIOS segment is: 0xc000
[ 10975.701] (II) SIS(0): VESA BIOS detected
[ 10975.701] (II) SIS(0): VESA VBE Version 3.0
[ 10975.701] (II) SIS(0): VESA VBE Total Mem: 32768 kB
[ 10975.701] (II) SIS(0): VESA VBE OEM: SiS
[ 10975.701] (II) SIS(0): VESA VBE OEM Software Rev: 1.0
[ 10975.701] (II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
[ 10975.701] (II) SIS(0): VESA VBE OEM Product: 6325
[ 10975.701] (II) SIS(0): VESA VBE OEM Product Rev: 1.10.6x
[ 10976.083] (II) SIS(0): Setting standard mode 0x64
[ 10976.400] (--) SIS(0): CPU frequency 1991.93Mhz
[ 10976.400] (II) SIS(0): Failed to allocate video RAM for video data transfer benchmark
[ 10976.400] (II) SIS(0): Chose MMX2 method for aligned data transfers to video RAM
[ 10976.400] (II) SIS(0): Chose MMX2 method for unaligned data transfers to video RAM
[ 10976.400] (--) SIS(0): CPU frequency 1991.93Mhz
[ 10976.400] (II) SIS(0): Failed to allocate video RAM for video data transfer benchmark
[ 10976.400] (II) SIS(0): Chose MMX2 method for aligned data transfers from video RAM
[ 10976.400] (II) SIS(0): Chose MMX2 method for unaligned data transfers from video RAM
[ 10976.400] (==) SIS(0): Backing store disabled
[ 10976.400] (==) SIS(0): Silken mouse enabled
[ 10976.402] (==) SIS(0): DPMS enabled
[ 10976.461] (II) SIS(0): Initialized SISCTRL extension version 0.1
[ 10976.461] (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
[ 10976.461] (==) RandR enabled
[ 10976.479] (II) AIGLX: Screen 0 is not DRI2 capable
[ 10976.479] (II) AIGLX: Screen 0 is not DRI capable
[ 10976.508] (II) AIGLX: Loaded and initialized swrast
[ 10976.508] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 10976.625] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 10976.625] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10976.625] (II) LoadModule: "evdev"
[ 10976.625] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10976.626] (II) Module evdev: vendor="X.Org Foundation"
[ 10976.626] 	compiled for 1.13.0, module version = 2.7.3
[ 10976.626] 	Module class: X.Org XInput Driver
[ 10976.626] 	ABI class: X.Org XInput driver, version 18.0
[ 10976.626] (II) Using input driver 'evdev' for 'Power Button'
[ 10976.626] (**) Power Button: always reports core events
[ 10976.626] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 10976.626] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10976.626] (--) evdev: Power Button: Found keys
[ 10976.626] (II) evdev: Power Button: Configuring as keyboard
[ 10976.626] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 10976.626] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10976.626] (**) Option "xkb_rules" "evdev"
[ 10976.626] (**) Option "xkb_model" "evdev"
[ 10976.626] (**) Option "xkb_layout" "us"
[ 10976.686] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 10976.686] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10976.686] (II) Using input driver 'evdev' for 'Power Button'
[ 10976.686] (**) Power Button: always reports core events
[ 10976.686] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 10976.686] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10976.686] (--) evdev: Power Button: Found keys
[ 10976.686] (II) evdev: Power Button: Configuring as keyboard
[ 10976.686] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input2/event2"
[ 10976.687] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 10976.687] (**) Option "xkb_rules" "evdev"
[ 10976.687] (**) Option "xkb_model" "evdev"
[ 10976.687] (**) Option "xkb_layout" "us"
[ 10976.688] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 10976.688] (II) No input driver specified, ignoring this device.
[ 10976.688] (II) This device may have been added with another device file.
[ 10976.689] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 10976.689] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 10976.689] (II) Using input driver 'evdev' for 'Sleep Button'
[ 10976.689] (**) Sleep Button: always reports core events
[ 10976.689] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 10976.689] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 10976.689] (--) evdev: Sleep Button: Found keys
[ 10976.689] (II) evdev: Sleep Button: Configuring as keyboard
[ 10976.689] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[ 10976.689] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 10976.689] (**) Option "xkb_rules" "evdev"
[ 10976.689] (**) Option "xkb_model" "evdev"
[ 10976.689] (**) Option "xkb_layout" "us"
[ 10976.691] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 10976.691] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 10976.691] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 10976.691] (**) AT Translated Set 2 keyboard: always reports core events
[ 10976.691] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 10976.691] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 10976.691] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 10976.691] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 10976.691] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 10976.691] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 10976.691] (**) Option "xkb_rules" "evdev"
[ 10976.691] (**) Option "xkb_model" "evdev"
[ 10976.691] (**) Option "xkb_layout" "us"
[ 10976.692] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 10976.693] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 10976.693] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 10976.693] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 10976.693] (II) LoadModule: "synaptics"
[ 10976.693] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 10976.693] (II) Module synaptics: vendor="X.Org Foundation"
[ 10976.693] 	compiled for 1.13.2, module version = 1.6.3
[ 10976.693] 	Module class: X.Org XInput Driver
[ 10976.693] 	ABI class: X.Org XInput driver, version 18.0
[ 10976.693] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 10976.693] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10976.694] (**) Option "Device" "/dev/input/event6"
[ 10976.696] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 10976.696] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 10976.696] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 10976.696] (II) synaptics: SynPS/2 Synaptics TouchPad: device does not report finger width.
[ 10976.696] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 10976.696] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 10976.696] (--) synaptics: SynPS/2 Synaptics TouchPad: invalid finger width range.  defaulting to 0 - 15
[ 10976.696] (**) Option "TapButton1" "1"
[ 10976.696] (**) Option "TapButton2" "2"
[ 10976.696] (**) Option "TapButton3" "3"
[ 10976.696] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10976.696] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10976.699] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input6/event6"
[ 10976.699] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[ 10976.699] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 10976.699] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 10976.699] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 10976.699] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 10976.699] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 10976.699] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 10976.699] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 10976.699] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10976.700] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 10976.700] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 10976.701] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 10976.701] (II) No input driver specified, ignoring this device.
[ 10976.701] (II) This device may have been added with another device file.
[ 15215.023] (II) SIS(0): Setting standard mode 0x35
[ 15219.614] (II) SIS(0): Setting standard mode 0x64
[ 24354.896] (II) SIS(0): Restoring by setting old mode 0x4a
[ 24401.853] (II) SIS(0): Setting standard mode 0x64
[ 24402.260] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24416.794] (II) SIS(0): Restoring by setting old mode 0x4a
[ 24455.405] (II) SIS(0): Setting standard mode 0x64
[ 24455.772] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24479.548] (II) SIS(0): Restoring by setting old mode 0x4a
[ 24498.468] (II) SIS(0): Setting standard mode 0x64
[ 24498.846] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24686.448] (II) SIS(0): Restoring by setting old mode 0x4a
[ 24704.281] (II) SIS(0): Setting standard mode 0x64
[ 24704.676] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found

Gusar · 2013-03-21 14:38:37

Just a FYI - there's no need to use ShadowFB anymore, the driver has been fixed so that EXA works. That's not the problem though, Xv works even with ShadowFB. And your log shows Xv is being loaded. No idea then why it isn't available.

Ok, found one interesting thing in the log:

[ 10976.400] (II) SIS(0): Failed to allocate video RAM for video data transfer benchmark

That does not look good. You should instead have something like this:

[    32.276] (II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
[    32.288] (--) SIS(0): 	Checked libc memcpy()... 	358.4 MiB/s
[    32.298] (--) SIS(0): 	Checked built-in-1 memcpy()... 	332.6 MiB/s
[    32.350] (--) SIS(0): 	Checked built-in-2 memcpy()... 	51.2 MiB/s
[    32.360] (--) SIS(0): 	Checked MMX memcpy()... 	332.5 MiB/s
[    32.368] (--) SIS(0): 	Checked SSE memcpy()... 	452.1 MiB/s
[    32.377] (--) SIS(0): 	Checked MMX2 memcpy()... 	430.9 MiB/s
[    32.377] (--) SIS(0): Using SSE method for aligned data transfers to video RAM
[    32.377] (--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM

How much RAM did you give to graphics in the bios? You can choose from 8MB to 64MB. I'd give it at least 32MB. Then there's only one other thing I can think of - Arch kernels do not have sisfb anymore. Shouldn't actually matter, but you could try compiling your own kernel and include sisfb in it.

Also, probably unrelated, but you should do it anyway - load the p4_clockmod module.

theGunslinger · 2013-03-21 16:00:01

It was at 32MB, tried with 64 aaand now it works! Thanks for the clockmod tip, although the pretty much dead battery won't benefit from it...

Hvala jos jednom

Last edited by theGunslinger (2013-03-21 16:03:27)

Arch Linux

#1 2013-03-20 14:21:34

Can't use fullscreen mode in mplayer

#2 2013-03-20 14:59:21

Re: Can't use fullscreen mode in mplayer

#3 2013-03-20 16:18:12

Re: Can't use fullscreen mode in mplayer

#4 2013-03-20 16:59:39

Re: Can't use fullscreen mode in mplayer

#5 2013-03-20 17:18:29

Re: Can't use fullscreen mode in mplayer

#6 2013-03-20 19:19:44

Re: Can't use fullscreen mode in mplayer

#7 2013-03-20 19:32:53

Re: Can't use fullscreen mode in mplayer

#8 2013-03-21 14:38:37

Re: Can't use fullscreen mode in mplayer

#9 2013-03-21 16:00:01

Re: Can't use fullscreen mode in mplayer

Board footer