Arch Linux

Known

Member

Registered: 2012-08-23

Posts: 63

[SOLVED] Problem with Bumblebee

Hey guys
On this time I have successfully installed Arch linux.
But like many times ago I can't use Bumblebee.
What am I have to do?
This is the error:

#optirun glxgears -info
[  186.336392] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)

[  186.336470] [ERROR]Aborting because fallback start is disabled.

Am I have to do this? Why?

In this case, you will need to move the file /etc/X11/xorg.conf.d/20-intel.conf to somewhere else. Restart the bumblebeed daemon, and it should work.
It could be also necessary to comment the driver line in /etc/X11/xorg.conf.d/10-monitor.conf.
If you're using the nouveau driver you could try switching to the nVidia driver.

Last edited by Known (2013-07-27 21:07:16)

Jodell

Member

Registered: 2009-10-09

Posts: 285

Re: [SOLVED] Problem with Bumblebee

I don't know the specifics but it just doesn't work. If you want to use SNA, recompile the driver with disabled UXA support.

Elfo404

Member

From: Rome, Italy

Registered: 2010-08-23

Posts: 2

Re: [SOLVED] Problem with Bumblebee

I had the same problem on an Asus UX32VD (intel - nVidia 620M) with nouveau driver and i tried almost anything i found on the wiki and on the web, the solution for me was to install proprietary nVidia driver as described here.

Known

Member

Registered: 2012-08-23

Posts: 63

Re: [SOLVED] Problem with Bumblebee

I had the same problem on an Asus UX32VD (intel - nVidia 620M) with nouveau driver and i tried almost anything i found on the wiki and on the web, the solution for me was to install proprietary nVidia driver as described here.

I think maybe it is better to wait for kernel 3.9.
I think prime helpers doesn't complete and after a full update we loss everything we got.