You are not logged in.

#1 2013-04-18 12:21:08

przemoli
Member
Registered: 2013-04-14
Posts: 6

[SOLVED] VirtualBox do not see just ONE USB device.

Summary: VirtualBox just presented device by chip&manufacturer name for wireless usb stick, and not the proper device. Everything worked from the start, I just missed it.

I want to sniff USB traffic for certain usb device (weather station), which currently do not work under Linux. So I need VM (VirtualBox) and working Windows, and getting VM to see this device.

VirtualBox see every device listed by lsusb, but this one. I had it working under different distro with VMPlayer, so device works too.

User is in virtualbox group, vboxdrv module is loaded, Extension Pack is installed, Guest addons for WinXP are also installed and working, udev rule is there too.

Oh, and its attached to HID general kernel driver under Linux (it work just for getting descriptors).

Last edited by przemoli (2013-04-19 09:43:44)

Offline

#2 2013-04-18 16:26:45

Roken
Member
From: South Wales, UK
Registered: 2012-01-16
Posts: 1,372

Re: [SOLVED] VirtualBox do not see just ONE USB device.

Does Windows in the VM need a driver before it will recognise it?


Ryzen 5900X 12 core/24 thread - RTX 3090 FE 24 Gb, Asus B550-F Gaming MB, 128Gb Corsair DDR4, Fractal Design Define 7 XL, 5 HD (2 NvME PCI, 4SSD) + 1 x optical.
Linux user #545703

/ is the root of all problems.

Offline

#3 2013-04-19 09:33:10

przemoli
Member
Registered: 2013-04-14
Posts: 6

Re: [SOLVED] VirtualBox do not see just ONE USB device.

Roken wrote:

Does Windows in the VM need a driver before it will recognise it?


Yes. It need but I have installed it successfully.


However in order for it to work, this usb device must be connected to VM, and VirtualBox present every other device for connecting, but not this one.

dmesg for this device:

[ 2994.150914] usb 4-1.2: new full-speed USB device number 4 using ehci-pci
[ 2994.238658] hid-generic 0003:1B1F:C00A.0004: hiddev0,hidraw3: USB HID v1.01 Device [eQ-3 Entwicklung GmbH IWF-USB] on usb-0000:00:1d.0-1.2/input0

So it connect without a problem. Kernel and lsusb see it, its just VirtualBox that is blind neutral. (When I choose Devices -> USB devices -> ..., in setting for VM same.)


Is there any command line tool for connecting usb devices to VM's for VirtualBox?


EDIT:

Case solved. VirtualBox just present this device by chip name, which put me off.

So I just needed to focus more on reading neutral

Last edited by przemoli (2013-04-19 09:42:02)

Offline

Board footer

Powered by FluxBB