You are not logged in.

#1 2013-04-22 09:07:54

iTanguy
Member
Registered: 2012-05-01
Posts: 28

On boot, xrandr does not use the preferred resolution anymore

Hello,
I run ArchLInux on my ThinkPad T420 at work. When I am at my Desktop, I use it in double screen, with the laptop screen (LVDS1 for xrandr) and the HDMI output on larger LCD screen (HDMI1 for xrandr).
At least in that working state, I don't use the screens side by side (In fact I close the lid, usually), so it's just in "clone" mode (but with different resolutions...).

Since about one month, When I boot, X doesn't start anymore with the expected resolutions ("preferred", for xrandr). When setting them by and, it works, but nothing automatic... And it's only at (cold) boot; after a suspend-to-disk, it resumes on the correct (former) resolution. I also think that it works fine if I boot with the HDMI cable unplugged (and plug it after X launch and call xrandr --auto).

I don't have anything in /etc/X11/xorg.conf.d/, only the basic default files, only tdealing with inputs (mouse, touch pad, etc). So I don't really where to start from.

Here X's output for today :

[   390.509] 
X.Org X Server 1.14.1
Release Date: 2013-04-17
[   390.509] X Protocol Version 11, Revision 0
[   390.509] Build Operating System: Linux 3.8.7-1-ARCH x86_64 
[   390.509] Current Operating System: Linux tperson 3.8.7-1-ARCH #1 SMP PREEMPT Sat Apr 13 09:01:47 CEST 2013 x86_64
[   390.509] Kernel command line: root=/dev/sda5 resume=/dev/sda6 ro
[   390.509] Build Date: 17 April 2013  02:37:06PM
[   390.509]  
[   390.509] Current version of pixman: 0.28.2
[   390.509] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   390.509] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   390.509] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 22 10:12:06 2013
[   390.619] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   390.642] (==) No Layout section.  Using the first Screen section.
[   390.642] (==) No screen section available. Using defaults.
[   390.642] (**) |-->Screen "Default Screen Section" (0)
[   390.642] (**) |   |-->Monitor "<default monitor>"
[   390.642] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   390.643] (==) Automatically adding devices
[   390.643] (==) Automatically enabling devices
[   390.643] (==) Automatically adding GPU devices
[   390.807] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   390.807] 	Entry deleted from font path.
[   390.878] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   390.878] (==) ModulePath set to "/usr/lib/xorg/modules"
[   390.878] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   390.878] (II) Loader magic: 0x7fcc20
[   390.878] (II) Module ABI versions:
[   390.878] 	X.Org ANSI C Emulation: 0.4
[   390.878] 	X.Org Video Driver: 14.1
[   390.878] 	X.Org XInput driver : 19.1
[   390.878] 	X.Org Server Extension : 7.0
[   390.879] (II) config/udev: Adding drm device (/dev/dri/card0)
[   390.882] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[   390.883] Initializing built-in extension Generic Event Extension
[   390.883] Initializing built-in extension SHAPE
[   390.883] Initializing built-in extension MIT-SHM
[   390.883] Initializing built-in extension XInputExtension
[   390.883] Initializing built-in extension XTEST
[   390.883] Initializing built-in extension BIG-REQUESTS
[   390.883] Initializing built-in extension SYNC
[   390.883] Initializing built-in extension XKEYBOARD
[   390.883] Initializing built-in extension XC-MISC
[   390.883] Initializing built-in extension SECURITY
[   390.884] Initializing built-in extension XINERAMA
[   390.884] Initializing built-in extension XFIXES
[   390.884] Initializing built-in extension RENDER
[   390.884] Initializing built-in extension RANDR
[   390.884] Initializing built-in extension COMPOSITE
[   390.884] Initializing built-in extension DAMAGE
[   390.884] Initializing built-in extension MIT-SCREEN-SAVER
[   390.884] Initializing built-in extension DOUBLE-BUFFER
[   390.884] Initializing built-in extension RECORD
[   390.884] Initializing built-in extension DPMS
[   390.884] Initializing built-in extension X-Resource
[   390.884] Initializing built-in extension XVideo
[   390.885] Initializing built-in extension XVideo-MotionCompensation
[   390.885] Initializing built-in extension XFree86-VidModeExtension
[   390.885] Initializing built-in extension XFree86-DGA
[   390.885] Initializing built-in extension XFree86-DRI
[   390.885] Initializing built-in extension DRI2
[   390.885] (II) LoadModule: "glx"
[   390.893] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   390.921] (II) Module glx: vendor="X.Org Foundation"
[   390.921] 	compiled for 1.14.1, module version = 1.0.0
[   390.921] 	ABI class: X.Org Server Extension, version 7.0
[   390.922] (==) AIGLX enabled
[   390.934] Loading extension GLX
[   390.934] (==) Matched intel as autoconfigured driver 0
[   390.934] (==) Matched intel as autoconfigured driver 1
[   390.934] (==) Matched vesa as autoconfigured driver 2
[   390.934] (==) Matched modesetting as autoconfigured driver 3
[   390.934] (==) Matched fbdev as autoconfigured driver 4
[   390.934] (==) Assigned the driver to the xf86ConfigLayout
[   390.934] (II) LoadModule: "intel"
[   391.056] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   391.146] (II) Module intel: vendor="X.Org Foundation"
[   391.147] 	compiled for 1.14.0, module version = 2.21.6
[   391.147] 	Module class: X.Org Video Driver
[   391.147] 	ABI class: X.Org Video Driver, version 14.1
[   391.147] (II) LoadModule: "vesa"
[   391.147] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   391.157] (II) Module vesa: vendor="X.Org Foundation"
[   391.157] 	compiled for 1.14.0, module version = 2.3.2
[   391.157] 	Module class: X.Org Video Driver
[   391.157] 	ABI class: X.Org Video Driver, version 14.1
[   391.157] (II) LoadModule: "modesetting"
[   391.214] (WW) Warning, couldn't open module modesetting
[   391.214] (II) UnloadModule: "modesetting"
[   391.214] (II) Unloading modesetting
[   391.214] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   391.214] (II) LoadModule: "fbdev"
[   391.214] (WW) Warning, couldn't open module fbdev
[   391.215] (II) UnloadModule: "fbdev"
[   391.215] (II) Unloading fbdev
[   391.215] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   391.215] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[   391.215] (II) VESA: driver for VESA chipsets: vesa
[   391.216] (++) using VT number 1

[   391.216] (WW) Falling back to old probe method for vesa
[   391.216] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   391.216] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   391.216] (==) intel(0): RGB weight 888
[   391.216] (==) intel(0): Default visual is TrueColor
[   391.216] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[   391.216] (**) intel(0): Relaxed fencing enabled
[   391.216] (**) intel(0): Wait on SwapBuffers? enabled
[   391.216] (**) intel(0): Triple buffering? enabled
[   391.216] (**) intel(0): Framebuffer tiled
[   391.216] (**) intel(0): Pixmaps tiled
[   391.216] (**) intel(0): 3D buffers tiled
[   391.216] (**) intel(0): SwapBuffers wait enabled
[   391.216] (==) intel(0): video overlay key set to 0x101fe
[   391.217] (II) intel(0): Output LVDS1 has no monitor section
[   391.217] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[   391.230] (II) intel(0): Output VGA1 has no monitor section
[   391.483] (II) intel(0): Output HDMI1 has no monitor section
[   391.523] (II) intel(0): Output DP1 has no monitor section
[   391.536] (II) intel(0): Output HDMI2 has no monitor section
[   391.550] (II) intel(0): Output HDMI3 has no monitor section
[   391.590] (II) intel(0): Output DP2 has no monitor section
[   391.630] (II) intel(0): Output DP3 has no monitor section
[   391.630] (II) intel(0): EDID for output LVDS1
[   391.630] (II) intel(0): Manufacturer: AUO  Model: 213e  Serial#: 0
[   391.630] (II) intel(0): Year: 2010  Week: 33
[   391.630] (II) intel(0): EDID Version: 1.4
[   391.630] (II) intel(0): Digital Display Input
[   391.630] (II) intel(0): 6 bits per channel
[   391.630] (II) intel(0): Digital interface is undefined
[   391.630] (II) intel(0): Max Image Size [cm]: horiz.: 31  vert.: 17
[   391.630] (II) intel(0): Gamma: 2.20
[   391.630] (II) intel(0): No DPMS capabilities specified
[   391.630] (II) intel(0): Supported color encodings: RGB 4:4:4 
[   391.630] (II) intel(0): First detailed timing is preferred mode
[   391.630] (II) intel(0): Preferred mode is native pixel format and refresh rate
[   391.630] (II) intel(0): redX: 0.610 redY: 0.350   greenX: 0.320 greenY: 0.560
[   391.630] (II) intel(0): blueX: 0.150 blueY: 0.130   whiteX: 0.313 whiteY: 0.329
[   391.630] (II) intel(0): Manufacturer's mask: 0
[   391.630] (II) intel(0): Supported detailed timing:
[   391.630] (II) intel(0): clock: 110.0 MHz   Image Size:  309 x 174 mm
[   391.630] (II) intel(0): h_active: 1600  h_sync: 1664  h_sync_end 1706 h_blank_end 2010 h_border: 0
[   391.630] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 906 v_blanking: 912 v_border: 0
[   391.630] (II) intel(0): Supported detailed timing:
[   391.630] (II) intel(0): clock: 73.3 MHz   Image Size:  309 x 174 mm
[   391.630] (II) intel(0): h_active: 1600  h_sync: 1664  h_sync_end 1706 h_blank_end 2010 h_border: 0
[   391.630] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 906 v_blanking: 912 v_border: 0
[   391.630] (II) intel(0):  AUO
[   391.630] (II) intel(0):  B140RW02 V1
[   391.630] (II) intel(0): EDID (in hex):
[   391.630] (II) intel(0): 	00ffffffffffff0006af3e2100000000
[   391.631] (II) intel(0): 	21140104901f11780261959c59528f26
[   391.631] (II) intel(0): 	21505400000001010101010101010101
[   391.631] (II) intel(0): 	010101010101f82a409a61840c30402a
[   391.631] (II) intel(0): 	330035ae10000018a51c409a61840c30
[   391.631] (II) intel(0): 	402a330035ae10000018000000fe0041
[   391.631] (II) intel(0): 	554f0a202020202020202020000000fe
[   391.631] (II) intel(0): 	004231343052573032205631200a00d0
[   391.631] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   391.631] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   391.631] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   391.631] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   391.631] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   391.631] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   391.631] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   391.631] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   391.631] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   391.631] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   391.631] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   391.631] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   391.631] (II) intel(0): Printing probed modes for output LVDS1
[   391.631] (II) intel(0): Modeline "1600x900"x60.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[   391.631] (II) intel(0): Modeline "1600x900"x40.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[   391.631] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   391.631] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   391.631] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   391.631] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   391.643] (II) intel(0): EDID for output VGA1
[   391.896] (II) intel(0): EDID for output HDMI1
[   391.897] (II) intel(0): Manufacturer: DEL  Model: a019  Serial#: 825832780
[   391.897] (II) intel(0): Year: 2006  Week: 50
[   391.897] (II) intel(0): EDID Version: 1.3
[   391.897] (II) intel(0): Digital Display Input
[   391.897] (II) intel(0): Max Image Size [cm]: horiz.: 43  vert.: 27
[   391.897] (II) intel(0): Gamma: 2.20
[   391.897] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[   391.897] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   391.897] (II) intel(0): Default color space is primary color space
[   391.897] (II) intel(0): First detailed timing is preferred mode
[   391.897] (II) intel(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[   391.897] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[   391.897] (II) intel(0): Supported established timings:
[   391.897] (II) intel(0): 720x400@70Hz
[   391.897] (II) intel(0): 640x480@60Hz
[   391.897] (II) intel(0): 640x480@75Hz
[   391.897] (II) intel(0): 800x600@60Hz
[   391.897] (II) intel(0): 800x600@75Hz
[   391.897] (II) intel(0): 1024x768@60Hz
[   391.897] (II) intel(0): 1024x768@75Hz
[   391.897] (II) intel(0): 1280x1024@75Hz
[   391.897] (II) intel(0): Manufacturer's mask: 0
[   391.897] (II) intel(0): Supported standard timings:
[   391.897] (II) intel(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   391.897] (II) intel(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   391.897] (II) intel(0): Supported detailed timing:
[   391.897] (II) intel(0): clock: 119.0 MHz   Image Size:  434 x 270 mm
[   391.897] (II) intel(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
[   391.897] (II) intel(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1080 v_border: 0
[   391.897] (II) intel(0): Serial No: HM0646CB195L
[   391.897] (II) intel(0): Monitor name: DELL 2007WFP
[   391.897] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[   391.897] (II) intel(0): EDID (in hex):
[   391.897] (II) intel(0): 	00ffffffffffff0010ac19a04c353931
[   391.897] (II) intel(0): 	32100103802b1b78eeee91a3544c9926
[   391.897] (II) intel(0): 	0f5054a54b008180714f010101010101
[   391.897] (II) intel(0): 	0101010101017c2e90a0601a1e403020
[   391.897] (II) intel(0): 	3600b20e1100001a000000ff00484d30
[   391.897] (II) intel(0): 	36343643423139354c0a000000fc0044
[   391.897] (II) intel(0): 	454c4c20323030375746500a000000fd
[   391.897] (II) intel(0): 	00384c1e530e000a202020202020007b
[   391.897] (II) intel(0): Printing probed modes for output HDMI1
[   391.897] (II) intel(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[   391.897] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   391.897] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   391.898] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   391.898] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[   391.898] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   391.898] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   391.898] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   391.898] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   391.898] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   391.898] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   391.940] (II) intel(0): EDID for output DP1
[   391.953] (II) intel(0): EDID for output HDMI2
[   391.966] (II) intel(0): EDID for output HDMI3
[   392.006] (II) intel(0): EDID for output DP2
[   392.046] (II) intel(0): EDID for output DP3
[   392.046] (II) intel(0): Output LVDS1 connected
[   392.046] (II) intel(0): Output VGA1 disconnected
[   392.046] (II) intel(0): Output HDMI1 connected
[   392.046] (II) intel(0): Output DP1 disconnected
[   392.047] (II) intel(0): Output HDMI2 disconnected
[   392.047] (II) intel(0): Output HDMI3 disconnected
[   392.047] (II) intel(0): Output DP2 disconnected
[   392.047] (II) intel(0): Output DP3 disconnected
[   392.047] (II) intel(0): Using fuzzy aspect match for initial modes
[   392.047] (II) intel(0): Output LVDS1 using initial mode 1024x768
[   392.047] (II) intel(0): Output HDMI1 using initial mode 1024x768
[   392.047] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   392.047] (II) intel(0): Kernel page flipping support detected, enabling
[   392.047] (==) intel(0): DPI set to (96, 96)
[   392.047] (II) Loading sub module "fb"
[   392.047] (II) LoadModule: "fb"
[   392.047] (II) Loading /usr/lib/xorg/modules/libfb.so
[   392.122] (II) Module fb: vendor="X.Org Foundation"
[   392.122] 	compiled for 1.14.1, module version = 1.0.0
[   392.122] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   392.122] (II) Loading sub module "dri2"
[   392.122] (II) LoadModule: "dri2"
[   392.122] (II) Module "dri2" already built-in
[   392.122] (II) UnloadModule: "vesa"
[   392.122] (II) Unloading vesa
[   392.123] (==) Depth 24 pixmap format is 32 bpp
[   392.123] (II) intel(0): [DRI2] Setup complete
[   392.123] (II) intel(0): [DRI2]   DRI driver: i965
[   392.123] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[   392.125] (II) UXA(0): Driver registered support for the following operations:
[   392.125] (II)         solid
[   392.125] (II)         copy
[   392.125] (II)         composite (RENDER acceleration)
[   392.125] (II)         put_image
[   392.125] (II)         get_image
[   392.125] (==) intel(0): Backing store disabled
[   392.125] (==) intel(0): Silken mouse enabled
[   392.125] (II) intel(0): Initializing HW Cursor
[   392.125] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   392.127] (==) intel(0): DPMS enabled
[   392.127] (==) intel(0): Intel XvMC decoder enabled
[   392.127] (II) intel(0): Set up textured video
[   392.127] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   392.127] (II) intel(0): direct rendering: DRI2 Enabled
[   392.127] (==) intel(0): hotplug detection: "enabled"
[   392.700] (--) RandR disabled
[   392.945] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   392.945] (II) AIGLX: enabled GLX_INTEL_swap_event
[   392.945] (II) AIGLX: enabled GLX_ARB_create_context
[   392.945] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   392.945] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   392.945] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   392.945] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   392.945] (II) AIGLX: Loaded and initialized i965
[   392.945] (II) GLX: Initialized DRI2 GL provider for screen 0
[   392.945] (II) intel(0): Setting screen physical size to 270 x 203
[   393.385] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   393.386] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   393.386] (**) Power Button: Applying InputClass "Keyboard defaults"
[   393.386] (II) LoadModule: "evdev"
[   393.386] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   393.415] (II) Module evdev: vendor="X.Org Foundation"
[   393.415] 	compiled for 1.14.0, module version = 2.8.0
[   393.415] 	Module class: X.Org XInput Driver
[   393.415] 	ABI class: X.Org XInput driver, version 19.1
[   393.415] (II) Using input driver 'evdev' for 'Power Button'
[   393.415] (**) Power Button: always reports core events
[   393.415] (**) evdev: Power Button: Device: "/dev/input/event3"
[   393.416] (--) evdev: Power Button: Vendor 0 Product 0x1
[   393.416] (--) evdev: Power Button: Found keys
[   393.416] (II) evdev: Power Button: Configuring as keyboard
[   393.416] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   393.416] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   393.416] (**) Option "xkb_rules" "evdev"
[   393.416] (**) Option "xkb_model" "evdev"
[   393.416] (**) Option "xkb_layout" "fr"
[   393.416] (**) Option "xkb_variant" "oss"
[   393.468] (II) config/udev: Adding input device Video Bus (/dev/input/event17)
[   393.468] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   393.468] (**) Video Bus: Applying InputClass "Keyboard defaults"
[   393.468] (II) Using input driver 'evdev' for 'Video Bus'
[   393.468] (**) Video Bus: always reports core events
[   393.468] (**) evdev: Video Bus: Device: "/dev/input/event17"
[   393.468] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   393.468] (--) evdev: Video Bus: Found keys
[   393.468] (II) evdev: Video Bus: Configuring as keyboard
[   393.468] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17/event17"
[   393.468] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   393.468] (**) Option "xkb_rules" "evdev"
[   393.468] (**) Option "xkb_model" "evdev"
[   393.468] (**) Option "xkb_layout" "fr"
[   393.468] (**) Option "xkb_variant" "oss"
[   393.469] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   393.469] (II) No input driver specified, ignoring this device.
[   393.469] (II) This device may have been added with another device file.
[   393.469] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   393.469] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   393.469] (**) Sleep Button: Applying InputClass "Keyboard defaults"
[   393.469] (II) Using input driver 'evdev' for 'Sleep Button'
[   393.469] (**) Sleep Button: always reports core events
[   393.469] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[   393.469] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   393.469] (--) evdev: Sleep Button: Found keys
[   393.469] (II) evdev: Sleep Button: Configuring as keyboard
[   393.469] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[   393.469] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   393.469] (**) Option "xkb_rules" "evdev"
[   393.469] (**) Option "xkb_model" "evdev"
[   393.469] (**) Option "xkb_layout" "fr"
[   393.469] (**) Option "xkb_variant" "oss"
[   393.469] (II) config/udev: Adding drm device (/dev/dri/card0)
[   393.469] (II) config/udev: Adding input device HID 04d9:1133 (/dev/input/event6)
[   393.469] (**) HID 04d9:1133: Applying InputClass "evdev pointer catchall"
[   393.469] (II) Using input driver 'evdev' for 'HID 04d9:1133'
[   393.469] (**) HID 04d9:1133: always reports core events
[   393.469] (**) evdev: HID 04d9:1133: Device: "/dev/input/event6"
[   393.469] (--) evdev: HID 04d9:1133: Vendor 0x4d9 Product 0x1133
[   393.469] (--) evdev: HID 04d9:1133: Found 3 mouse buttons
[   393.469] (--) evdev: HID 04d9:1133: Found scroll wheel(s)
[   393.469] (--) evdev: HID 04d9:1133: Found relative axes
[   393.469] (--) evdev: HID 04d9:1133: Found x and y relative axes
[   393.469] (II) evdev: HID 04d9:1133: Configuring as mouse
[   393.469] (II) evdev: HID 04d9:1133: Adding scrollwheel support
[   393.470] (**) evdev: HID 04d9:1133: YAxisMapping: buttons 4 and 5
[   393.470] (**) evdev: HID 04d9:1133: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   393.470] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input6/event6"
[   393.470] (II) XINPUT: Adding extended input device "HID 04d9:1133" (type: MOUSE, id 9)
[   393.470] (II) evdev: HID 04d9:1133: initialized for relative axes.
[   393.470] (**) HID 04d9:1133: (accel) keeping acceleration scheme 1
[   393.470] (**) HID 04d9:1133: (accel) acceleration profile 0
[   393.470] (**) HID 04d9:1133: (accel) acceleration factor: 2.000
[   393.470] (**) HID 04d9:1133: (accel) acceleration threshold: 4
[   393.471] (II) config/udev: Adding input device HID 04d9:1133 (/dev/input/mouse0)
[   393.471] (II) No input driver specified, ignoring this device.
[   393.471] (II) This device may have been added with another device file.
[   393.472] (II) config/udev: Adding input device DELL DELL USB Keyboard (/dev/input/event7)
[   393.472] (**) DELL DELL USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   393.472] (**) DELL DELL USB Keyboard: Applying InputClass "Keyboard defaults"
[   393.472] (II) Using input driver 'evdev' for 'DELL DELL USB Keyboard'
[   393.472] (**) DELL DELL USB Keyboard: always reports core events
[   393.472] (**) evdev: DELL DELL USB Keyboard: Device: "/dev/input/event7"
[   393.472] (--) evdev: DELL DELL USB Keyboard: Vendor 0x413c Product 0x2005
[   393.472] (--) evdev: DELL DELL USB Keyboard: Found keys
[   393.472] (II) evdev: DELL DELL USB Keyboard: Configuring as keyboard
[   393.472] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input7/event7"
[   393.472] (II) XINPUT: Adding extended input device "DELL DELL USB Keyboard" (type: KEYBOARD, id 10)
[   393.472] (**) Option "xkb_rules" "evdev"
[   393.472] (**) Option "xkb_model" "evdev"
[   393.472] (**) Option "xkb_layout" "fr"
[   393.472] (**) Option "xkb_variant" "oss"
[   393.473] (II) config/udev: Adding input device Integrated Camera (/dev/input/event16)
[   393.473] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[   393.473] (**) Integrated Camera: Applying InputClass "Keyboard defaults"
[   393.473] (II) Using input driver 'evdev' for 'Integrated Camera'
[   393.473] (**) Integrated Camera: always reports core events
[   393.473] (**) evdev: Integrated Camera: Device: "/dev/input/event16"
[   393.473] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb221
[   393.473] (--) evdev: Integrated Camera: Found keys
[   393.473] (II) evdev: Integrated Camera: Configuring as keyboard
[   393.474] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input16/event16"
[   393.474] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 11)
[   393.474] (**) Option "xkb_rules" "evdev"
[   393.474] (**) Option "xkb_model" "evdev"
[   393.474] (**) Option "xkb_layout" "fr"
[   393.474] (**) Option "xkb_variant" "oss"
[   393.475] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[   393.475] (II) No input driver specified, ignoring this device.
[   393.475] (II) This device may have been added with another device file.
[   393.475] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[   393.475] (II) No input driver specified, ignoring this device.
[   393.475] (II) This device may have been added with another device file.
[   393.476] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event11)
[   393.476] (II) No input driver specified, ignoring this device.
[   393.476] (II) This device may have been added with another device file.
[   393.476] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[   393.476] (II) No input driver specified, ignoring this device.
[   393.476] (II) This device may have been added with another device file.
[   393.476] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[   393.477] (II) No input driver specified, ignoring this device.
[   393.477] (II) This device may have been added with another device file.
[   393.477] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event14)
[   393.477] (II) No input driver specified, ignoring this device.
[   393.477] (II) This device may have been added with another device file.
[   393.477] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
[   393.477] (II) No input driver specified, ignoring this device.
[   393.477] (II) This device may have been added with another device file.
[   393.477] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[   393.477] (II) No input driver specified, ignoring this device.
[   393.477] (II) This device may have been added with another device file.
[   393.477] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   393.477] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   393.477] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard defaults"
[   393.477] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   393.477] (**) AT Translated Set 2 keyboard: always reports core events
[   393.477] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   393.477] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   393.477] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   393.477] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   393.477] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   393.477] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[   393.477] (**) Option "xkb_rules" "evdev"
[   393.477] (**) Option "xkb_model" "evdev"
[   393.477] (**) Option "xkb_layout" "fr"
[   393.477] (**) Option "xkb_variant" "oss"
[   393.478] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[   393.478] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   393.478] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   393.478] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   393.478] (II) LoadModule: "synaptics"
[   393.478] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   393.503] (II) Module synaptics: vendor="X.Org Foundation"
[   393.503] 	compiled for 1.14.0, module version = 1.7.0
[   393.503] 	Module class: X.Org XInput Driver
[   393.503] 	ABI class: X.Org XInput driver, version 19.1
[   393.503] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   393.503] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   393.503] (**) Option "Device" "/dev/input/event15"
[   393.520] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[   393.520] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888 (res 75)
[   393.520] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820 (res 105)
[   393.520] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   393.520] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   393.520] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   393.520] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   393.520] (**) Option "TapButton1" "1"
[   393.520] (**) Option "TapButton2" "2"
[   393.520] (**) Option "TapButton3" "3"
[   393.520] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   393.520] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   393.530] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event15"
[   393.530] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[   393.530] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   393.530] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   393.530] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[   393.530] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   393.531] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   393.531] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   393.531] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   393.531] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   393.531] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   393.531] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   393.532] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event18)
[   393.532] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[   393.532] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[   393.532] (**) TPPS/2 IBM TrackPoint: always reports core events
[   393.532] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event18"
[   393.532] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[   393.532] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[   393.532] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[   393.532] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[   393.532] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[   393.532] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[   393.532] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   393.532] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input18/event18"
[   393.532] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[   393.532] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[   393.533] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[   393.533] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[   393.533] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[   393.533] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[   393.533] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[   393.534] (II) No input driver specified, ignoring this device.
[   393.534] (II) This device may have been added with another device file.
[   393.534] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[   393.534] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[   393.535] (**) ThinkPad Extra Buttons: Applying InputClass "Keyboard defaults"
[   393.535] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[   393.535] (**) ThinkPad Extra Buttons: always reports core events
[   393.535] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
[   393.535] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[   393.535] (--) evdev: ThinkPad Extra Buttons: Found keys
[   393.535] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[   393.535] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input4/event4"
[   393.535] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 15)
[   393.535] (**) Option "xkb_rules" "evdev"
[   393.535] (**) Option "xkb_model" "evdev"
[   393.535] (**) Option "xkb_layout" "fr"
[   393.535] (**) Option "xkb_variant" "oss"
[   395.112] (II) intel(0): EDID vendor "AUO", prod id 8510
[   395.112] (II) intel(0): Printing DDC gathered Modelines:
[   395.112] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[   395.112] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[   395.523] (II) intel(0): EDID vendor "AUO", prod id 8510
[   395.523] (II) intel(0): Printing DDC gathered Modelines:
[   395.524] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[   395.524] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[   395.942] (II) intel(0): EDID vendor "AUO", prod id 8510
[   395.942] (II) intel(0): Printing DDC gathered Modelines:
[   395.942] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[   395.942] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[   583.668] (II) intel(0): EDID vendor "AUO", prod id 8510
[   583.668] (II) intel(0): Printing DDC gathered Modelines:
[   583.668] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[   583.668] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[   593.901] (II) intel(0): EDID vendor "AUO", prod id 8510
[   593.901] (II) intel(0): Printing DDC gathered Modelines:
[   593.901] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[   593.901] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[   999.675] (II) intel(0): EDID vendor "AUO", prod id 8510
[   999.675] (II) intel(0): Printing DDC gathered Modelines:
[   999.675] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[   999.675] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  1000.092] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[  1000.420] (II) intel(0): EDID vendor "AUO", prod id 8510
[  1000.420] (II) intel(0): Printing DDC gathered Modelines:
[  1000.420] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  1000.420] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  1000.860] (II) intel(0): EDID vendor "AUO", prod id 8510
[  1000.860] (II) intel(0): Printing DDC gathered Modelines:
[  1000.860] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  1000.860] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  1001.281] (II) intel(0): EDID vendor "AUO", prod id 8510
[  1001.281] (II) intel(0): Printing DDC gathered Modelines:
[  1001.281] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  1001.281] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  1001.694] (II) intel(0): EDID vendor "AUO", prod id 8510
[  1001.694] (II) intel(0): Printing DDC gathered Modelines:
[  1001.694] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  1001.694] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  1002.128] (II) intel(0): EDID vendor "AUO", prod id 8510
[  1002.128] (II) intel(0): Printing DDC gathered Modelines:
[  1002.128] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  1002.128] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  1009.889] (II) intel(0): EDID vendor "AUO", prod id 8510
[  1009.889] (II) intel(0): Printing DDC gathered Modelines:
[  1009.889] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  1009.889] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  1026.586] (II) intel(0): EDID vendor "AUO", prod id 8510
[  1026.586] (II) intel(0): Printing DDC gathered Modelines:
[  1026.586] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  1026.586] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  1027.284] (II) intel(0): EDID vendor "AUO", prod id 8510
[  1027.284] (II) intel(0): Printing DDC gathered Modelines:
[  1027.284] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  1027.284] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)
[  1027.699] (II) intel(0): EDID vendor "AUO", prod id 8510
[  1027.699] (II) intel(0): Printing DDC gathered Modelines:
[  1027.700] (II) intel(0): Modeline "1600x900"x0.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  1027.700] (II) intel(0): Modeline "1600x900"x0.0   73.33  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (36.5 kHz e)

For me, it looks like a regression, maybe linked to the kernel upgrade to branch 3.8, or maybe to another (obscure to me, like EDID management) packet.

Offline

#2 2013-04-26 10:26:20

iTanguy
Member
Registered: 2012-05-01
Posts: 28

Re: On boot, xrandr does not use the preferred resolution anymore

Anyone could help on this ?
It is a regression to me, as it used to work nicely... unless I miss-did something.

Offline

#3 2013-04-26 10:36:24

Gusar
Member
Registered: 2009-08-25
Posts: 3,605

Re: On boot, xrandr does not use the preferred resolution anymore

Despite the many lines you've written, the situation is still unclear: What is the native resolution of each display, at what resolutions do you want them to be, and in what resolutions does X start instead?

The default has always been that X comes up in clone mode, in the highest resolution both displays can handle. Looking at that log, the highest common resolution is... 1024x768

Offline

#4 2013-04-26 11:31:40

iTanguy
Member
Registered: 2012-05-01
Posts: 28

Re: On boot, xrandr does not use the preferred resolution anymore

Thanks for your attention.

In the above logs, higher resolutions seems to be detected on both screens, hence my surprise :

[   391.631] (II) intel(0): Printing probed modes for output LVDS1
[   391.631] (II) intel(0): Modeline "1600x900"x60.0  110.00  1600 1664 1706 2010  900 903 906 912 -hsync -vsync (54.7 kHz eP)
(...)
[   391.897] (II) intel(0): Printing probed modes for output HDMI1
[   391.897] (II) intel(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)

If it can help here is also my current xrandr output (after having called it manually to use the preferred resolution of each screen)

itanguy ~ $  xrandr
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 8192 x 8192
LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
   1600x900       60.0*+   40.0  
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 434mm x 270mm
   1680x1050      59.9*+
   1280x1024      75.0     60.0  
   1152x864       75.0  
   1024x768       75.1     60.0  
   800x600        75.0     60.3  
   640x480        75.0     60.0  
   720x400        70.1  
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)

If needed, I may reboot and provide xrandr output after boot (it will be 1024x768), or could other logs help you ? Please ask...

Offline

#5 2013-04-26 12:26:34

Gusar
Member
Registered: 2009-08-25
Posts: 3,605

Re: On boot, xrandr does not use the preferred resolution anymore

iTanguy wrote:

I may reboot and provide xrandr output after boot (it will be 1024x768)

Which is, as I said, completely normal. I've never seen X behave differently that that. If you want something different: https://wiki.archlinux.org/index.php/Du … .conf_file

Offline

#6 2013-04-26 12:37:42

iTanguy
Member
Registered: 2012-05-01
Posts: 28

Re: On boot, xrandr does not use the preferred resolution anymore

Gusar wrote:

Which is, as I said, completely normal. I've never seen X behave differently that that.

Sorry, I misundestood your answer. Thank you for your patience.

Still, I am a bit suprised, as I think that believe that the PC used to behave previously as I expect, that is :
- each screen in its maximum resolution
- as "overlapping windows" ("clone" is probably not the correct work, considering that, as one of the screen si smaller than the other, soem things can't be viewed on the small one)
But maybe I am wrong, or maybe that, if it used to behave like this, it was ... a bug, now fixed ?

I am also considering using "dual screen" (side by side or one above the other), but that's not my regular usage, as I keep the laptop lid closed when at main main desk.
So for the moment the "overlapping" mode is what I want.

Offline

#7 2013-04-26 22:34:13

singenbale
Member
Registered: 2010-10-01
Posts: 33

Re: On boot, xrandr does not use the preferred resolution anymore

If i understand correctly i had similar problem. eDP1(laptop)=1280x800, external display=1366x768, connect external display to VGA1 on laptop, reboot and both are set to 1024x768. I ended up with the following in /etc/X11/xorg.conf.d/10-monitor.conf

Section "Monitor"
    Identifier             "eDP1"
         Option                 "PreferredMode" "1280x800"
EndSection

Section "Monitor"
    Identifier             "VGA1"
#       Option                  "PreferredMode" "1920x1080"
        Option                  "PreferredMode" "1366x768"
EndSection

Section "Device"
    Identifier             "Device0"
    Driver                 "intel" #Choose the driver used for this monitor
EndSection

Section "Screen"
    Identifier             "Screen0"  #Collapse Monitor and Device section to Screen section
    Device                 "Device0"
    Monitor                "eDP1"
    DefaultDepth            24 #Choose the depth (16||24)
    SubSection             "Display"
        Depth               24
        Modes              "1280x800_60.00" #Choose the resolution
    EndSubSection
EndSection

result: clone mode with maximum resolution on each display

Offline

Board footer

Powered by FluxBB