You are not logged in.

#1 2013-04-27 06:32:31

doblerone
Member
Registered: 2011-12-08
Posts: 159

Arch freezes for a few seconds from time to time

It freezes for a 5-10 seconds and after that, everything work fine again. After one of these, I made dmesg:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.8-2-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Apr 23 10:28:14 CEST 2013
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9be30883-9b56-4a19-8566-9fca564adb98 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe6ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfe70000-0x00000000cfe87fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfe88000-0x00000000cfedbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfedc000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/P7P55D PRO, BIOS 2101    09/27/2012
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 120000000 mask FF0000000 write-back
[    0.000000]   3 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcfe70 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0xcfe6ffff]
[    0.000000]  [mem 0x00000000-0xcfdfffff] page 2M
[    0.000000]  [mem 0xcfe00000-0xcfe6ffff] page 4k
[    0.000000] kernel direct mapping tables up to 0xcfe6ffff @ [mem 0x1fffa000-0x1fffffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x12fffffff]
[    0.000000]  [mem 0x100000000-0x12fffffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x12fffffff @ [mem 0xcfe6e000-0xcfe6ffff]
[    0.000000] RAMDISK: [mem 0x37a28000-0x37d0bfff]
[    0.000000] ACPI: RSDP 00000000000fb970 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000cfe70000 00044 (v01 092712 RSDT2113 20120927 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000cfe70200 00084 (v01 092712 FACP2113 20120927 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000cfe704a0 0EFF9 (v01  A1325 A1325001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 00000000cfe88000 00040
[    0.000000] ACPI: APIC 00000000cfe70390 000CC (v01 092712 APIC2113 20120927 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000cfe70460 0003C (v01 092712 OEMMCFG  20120927 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000cfe88040 00072 (v01 092712 OEMB2113 20120927 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cfe7f4a0 00038 (v01 092712 OEMHPET  20120927 MSFT 00000097)
[    0.000000] ACPI: ASPT 00000000cfe7f740 00034 (v06 092712 PerfTune 20120927 MSFT 00000097)
[    0.000000] ACPI: OSFR 00000000cfe7f780 000B0 (v01 092712 OEMOSFR  20120927 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000cfe896d0 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[    0.000000]   NODE_DATA [mem 0x12fffb000-0x12fffffff]
[    0.000000]  [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x12fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xcfe6ffff]
[    0.000000]   node   0: [mem 0x100000000-0x12fffffff]
[    0.000000] On node 0 totalpages: 1048063
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13242 pages used for memmap
[    0.000000]   DMA32 zone: 834230 pages, LIFO batch:31
[    0.000000]   Normal zone: 3072 pages used for memmap
[    0.000000]   Normal zone: 193536 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[    0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cfe70000 - 00000000cfe88000
[    0.000000] PM: Registered nosave memory: 00000000cfe88000 - 00000000cfedc000
[    0.000000] PM: Registered nosave memory: 00000000cfedc000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[    0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s85184 r8192 d21312 u131072
[    0.000000] pcpu-alloc: s85184 r8192 d21312 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031679
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9be30883-9b56-4a19-8566-9fca564adb98 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4044444k/4980736k available (4908k kernel code, 788484k absent, 147808k reserved, 4024k data, 820k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.
[    0.000000] NR_IRQS:4352 nr_irqs:808 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2675.033 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5352.98 BogoMIPS (lpj=8916776)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000036] Security Framework initialized
[    0.000043] AppArmor: AppArmor disabled by boot time parameter
[    0.000288] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001381] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001864] Mount-cache hash table entries: 256
[    0.002041] Initializing cgroup subsys cpuacct
[    0.002043] Initializing cgroup subsys memory
[    0.002050] Initializing cgroup subsys devices
[    0.002052] Initializing cgroup subsys freezer
[    0.002053] Initializing cgroup subsys net_cls
[    0.002055] Initializing cgroup subsys blkio
[    0.002075] CPU: Physical Processor ID: 0
[    0.002076] CPU: Processor Core ID: 0
[    0.002080] mce: CPU supports 9 MCE banks
[    0.002088] CPU0: Thermal monitoring enabled (TM1)
[    0.002094] process: using mwait in idle threads
[    0.002098] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[    0.002220] Freeing SMP alternatives: 20k freed
[    0.003096] ACPI: Core revision 20121018
[    0.112660] ftrace: allocating 19310 entries in 76 pages
[    0.121205] Switched APIC routing to physical flat.
[    0.121576] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.154511] smpboot: CPU0: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz (fam: 06, model: 1e, stepping: 05)
[    0.260220] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[    0.260225] perf_event_intel: CPU erratum AAJ80 worked around
[    0.260226] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.260227] ... version:                3
[    0.260228] ... bit width:              48
[    0.260229] ... generic registers:      4
[    0.260230] ... value mask:             0000ffffffffffff
[    0.260231] ... max period:             000000007fffffff
[    0.260232] ... fixed-purpose events:   3
[    0.260233] ... event mask:             000000070000000f
[    0.296840] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.283586] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.329957] Brought up 4 CPUs
[    0.329961] smpboot: Total of 4 processors activated (21408.94 BogoMIPS)
[    0.332774] devtmpfs: initialized
[    0.333801] PM: Registering ACPI NVS region [mem 0xcfe88000-0xcfedbfff] (344064 bytes)
[    0.334512] RTC time: 20:37:55, date: 04/26/13
[    0.334555] NET: Registered protocol family 16
[    0.334672] ACPI: bus type pci registered
[    0.334724] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.334726] PCI: not using MMCONFIG
[    0.334728] PCI: Using configuration type 1 for base access
[    0.335208] bio: create slab <bio-0> at 0
[    0.335263] ACPI: Added _OSI(Module Device)
[    0.335265] ACPI: Added _OSI(Processor Device)
[    0.335266] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.335267] ACPI: Added _OSI(Processor Aggregator Device)
[    0.336392] ACPI: EC: Look up EC in DSDT
[    0.337503] ACPI: Executed 1 blocks of module-level executable AML code
[    0.343814] ACPI: SSDT 00000000cfe880c0 01130 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
[    0.344124] ACPI: Dynamic OEM Table Load:
[    0.344126] ACPI: SSDT           (null) 01130 (v01 DpgPmm  P001Ist 00000011 INTL 20060113)
[    0.344194] ACPI: SSDT 00000000cfe891f0 004D5 (v01  PmRef  P001Cst 00003001 INTL 20060113)
[    0.344464] ACPI: Dynamic OEM Table Load:
[    0.344466] ACPI: SSDT           (null) 004D5 (v01  PmRef  P001Cst 00003001 INTL 20060113)
[    0.344718] ACPI: Interpreter enabled
[    0.344722] ACPI: (supports S0 S1 S3 S4 S5)
[    0.344736] ACPI: Using IOAPIC for interrupt routing
[    0.344751] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.345715] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.354230] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.354321] ACPI: No dock devices found.
[    0.354325] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.354387] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.354389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.354650] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.354672] PCI host bridge to bus 0000:00
[    0.354674] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.354676] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.354677] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.354679] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.354681] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.354682] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
[    0.354684] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff]
[    0.354692] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
[    0.354741] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[    0.354793] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[    0.354844] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[    0.354893] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[    0.354938] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[    0.354977] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[    0.355036] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.355056] pci 0000:00:1a.0: reg 10: [mem 0xf7afe000-0xf7afe3ff]
[    0.355139] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.355164] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.355178] pci 0000:00:1b.0: reg 10: [mem 0xf7af8000-0xf7afbfff 64bit]
[    0.355239] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.355258] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.355320] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.355343] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.355405] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.355425] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[    0.355487] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.355507] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[    0.355569] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.355589] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
[    0.355651] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.355675] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.355694] pci 0000:00:1d.0: reg 10: [mem 0xf7afd000-0xf7afd3ff]
[    0.355777] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.355796] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.355854] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
[    0.355965] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[    0.355979] pci 0000:00:1f.2: reg 10: [io  0x9c00-0x9c07]
[    0.355986] pci 0000:00:1f.2: reg 14: [io  0x9880-0x9883]
[    0.355993] pci 0000:00:1f.2: reg 18: [io  0x9800-0x9807]
[    0.356000] pci 0000:00:1f.2: reg 1c: [io  0x9480-0x9483]
[    0.356006] pci 0000:00:1f.2: reg 20: [io  0x9400-0x940f]
[    0.356013] pci 0000:00:1f.2: reg 24: [io  0x9080-0x908f]
[    0.356055] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.356068] pci 0000:00:1f.3: reg 10: [mem 0xf7afc000-0xf7afc0ff 64bit]
[    0.356087] pci 0000:00:1f.3: reg 20: [io  0xffe0-0xffff]
[    0.356117] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[    0.356130] pci 0000:00:1f.5: reg 10: [io  0xac00-0xac07]
[    0.356137] pci 0000:00:1f.5: reg 14: [io  0xa880-0xa883]
[    0.356144] pci 0000:00:1f.5: reg 18: [io  0xa800-0xa807]
[    0.356151] pci 0000:00:1f.5: reg 1c: [io  0xa480-0xa483]
[    0.356158] pci 0000:00:1f.5: reg 20: [io  0xa400-0xa40f]
[    0.356165] pci 0000:00:1f.5: reg 24: [io  0xa080-0xa08f]
[    0.356249] pci 0000:05:00.0: [1002:94b3] type 00 class 0x030000
[    0.356267] pci 0000:05:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.356281] pci 0000:05:00.0: reg 18: [mem 0xf7ee0000-0xf7eeffff 64bit]
[    0.356291] pci 0000:05:00.0: reg 20: [io  0xd000-0xd0ff]
[    0.356309] pci 0000:05:00.0: reg 30: [mem 0xf7ec0000-0xf7edffff pref]
[    0.356355] pci 0000:05:00.0: supports D1 D2
[    0.356381] pci 0000:05:00.1: [1002:aa38] type 00 class 0x040300
[    0.356399] pci 0000:05:00.1: reg 10: [mem 0xf7efc000-0xf7efffff 64bit]
[    0.356483] pci 0000:05:00.1: supports D1 D2
[    0.360049] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    0.360056] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.360062] pci 0000:00:1c.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.360070] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.360119] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.360184] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
[    0.360209] pci 0000:03:00.0: reg 10: [mem 0xf7dfe000-0xf7dfffff 64bit]
[    0.360339] pci 0000:03:00.0: PME# supported from D0 D3hot
[    0.366705] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.366713] pci 0000:00:1c.5:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.366785] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
[    0.366869] pci 0000:02:00.0: reg 24: [mem 0xf7cfe000-0xf7cfffff]
[    0.366929] pci 0000:02:00.0: PME# supported from D3hot
[    0.366961] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
[    0.366984] pci 0000:02:00.1: reg 10: [io  0xcc00-0xcc07]
[    0.366997] pci 0000:02:00.1: reg 14: [io  0xc880-0xc883]
[    0.367009] pci 0000:02:00.1: reg 18: [io  0xc800-0xc807]
[    0.367022] pci 0000:02:00.1: reg 1c: [io  0xc480-0xc483]
[    0.367035] pci 0000:02:00.1: reg 20: [io  0xc400-0xc40f]
[    0.367115] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.367123] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    0.367126] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.367130] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.367185] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.367200] pci 0000:01:00.0: reg 10: [io  0xb800-0xb8ff]
[    0.367227] pci 0000:01:00.0: reg 18: [mem 0xdffff000-0xdfffffff 64bit pref]
[    0.367244] pci 0000:01:00.0: reg 20: [mem 0xdfff8000-0xdfffbfff 64bit pref]
[    0.367255] pci 0000:01:00.0: reg 30: [mem 0xf7bf0000-0xf7bfffff pref]
[    0.367317] pci 0000:01:00.0: supports D1 D2
[    0.367318] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.373360] pci 0000:00:1c.7: PCI bridge to [bus 01]
[    0.373366] pci 0000:00:1c.7:   bridge window [io  0xb000-0xbfff]
[    0.373371] pci 0000:00:1c.7:   bridge window [mem 0xf7b00000-0xf7bfffff]
[    0.373380] pci 0000:00:1c.7:   bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
[    0.373426] pci 0000:06:03.0: [1106:3044] type 00 class 0x0c0010
[    0.373442] pci 0000:06:03.0: reg 10: [mem 0xf7fff800-0xf7ffffff]
[    0.373451] pci 0000:06:03.0: reg 14: [io  0xec00-0xec7f]
[    0.373515] pci 0000:06:03.0: supports D2
[    0.373517] pci 0000:06:03.0: PME# supported from D2 D3hot D3cold
[    0.373556] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[    0.373559] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.373563] pci 0000:00:1e.0:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.373568] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.373569] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.373571] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.373572] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.373574] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[    0.373578] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfed8ffff] (subtractive decode)
[    0.373607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
[    0.373672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[    0.373692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
[    0.373711] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
[    0.373729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT]
[    0.373755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
[    0.373851]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.373980]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[    0.373981] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.375033] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.375068] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.375098] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.375130] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.375162] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.375195] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.375227] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.375259] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.375325] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.375327] vgaarb: loaded
[    0.375328] vgaarb: bridge control possible 0000:05:00.0
[    0.375356] PCI: Using ACPI for IRQ routing
[    0.376632] PCI: Discovered peer bus 3f
[    0.376633] PCI: root bus 3f: using default resources
[    0.376634] PCI: Probing PCI hardware (bus 3f)
[    0.376654] PCI host bridge to bus 0000:3f
[    0.376657] pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
[    0.376658] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[    0.376660] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[    0.376665] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
[    0.376686] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
[    0.376703] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
[    0.376719] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
[    0.376736] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
[    0.376752] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
[    0.376768] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
[    0.376784] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
[    0.376800] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
[    0.376815] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
[    0.376830] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
[    0.376847] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
[    0.376862] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
[    0.376878] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
[    0.376894] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
[    0.376919] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[    0.377167] PCI: pci_cache_line_size set to 64 bytes
[    0.377245] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.377246] e820: reserve RAM buffer [mem 0xcfe70000-0xcfffffff]
[    0.377322] NetLabel: Initializing
[    0.377324] NetLabel:  domain hash size = 128
[    0.377325] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.377334] NetLabel:  unlabeled traffic allowed by default
[    0.377364] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[    0.377370] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[    0.377375] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.379402] hpet: hpet2 irq 40 for MSI
[    0.379449] hpet: hpet3 irq 41 for MSI
[    0.379494] hpet: hpet4 irq 42 for MSI
[    0.379532] hpet: hpet5 irq 43 for MSI
[    0.379547] Switching to clocksource hpet
[    0.383196] pnp: PnP ACPI init
[    0.383206] ACPI: bus type pnp registered
[    0.383245] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.383248] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.383272] pnp 00:01: [dma 4]
[    0.383290] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.383314] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.383333] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.383356] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.383504] system 00:05: [io  0x0290-0x029f] has been reserved
[    0.383507] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.383675] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.383677] system 00:06: [io  0x0800-0x087f] has been reserved
[    0.383679] system 00:06: [io  0x0500-0x057f] has been reserved
[    0.383681] system 00:06: [io  0x0600-0x0607] has been reserved
[    0.383685] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.383687] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.383689] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.383691] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.383753] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.383801] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[    0.383853] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved
[    0.383856] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.384021] pnp 00:0a: [dma 0 disabled]
[    0.384071] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.384155] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.384157] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.384160] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.384230] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.384233] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.384383] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.384385] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.384387] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.384389] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.384391] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.384394] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.384484] pnp: PnP ACPI: found 14 devices
[    0.384486] ACPI: ACPI bus type pnp unregistered
[    0.390847] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.390850] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[    0.390852] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
[    0.390859] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.390861] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[    0.390868] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.390884] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.390886] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.390888] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.390889] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.390891] pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.390893] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.390896] pci 0000:00:1c.4: BAR 14: assigned [mem 0xd0000000-0xd01fffff]
[    0.390899] pci 0000:00:1c.4: BAR 15: assigned [mem 0xd0200000-0xd03fffff 64bit pref]
[    0.390901] pci 0000:00:1c.5: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
[    0.390903] pci 0000:00:1c.6: BAR 15: assigned [mem 0xd0600000-0xd07fffff 64bit pref]
[    0.390905] pci 0000:00:1c.4: BAR 13: assigned [io  0x1000-0x1fff]
[    0.390907] pci 0000:00:1c.5: BAR 13: assigned [io  0x2000-0x2fff]
[    0.390910] pci 0000:00:1c.0: PCI bridge to [bus 05]
[    0.390912] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.390916] pci 0000:00:1c.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.390919] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.390924] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.390926] pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
[    0.390930] pci 0000:00:1c.4:   bridge window [mem 0xd0000000-0xd01fffff]
[    0.390933] pci 0000:00:1c.4:   bridge window [mem 0xd0200000-0xd03fffff 64bit pref]
[    0.390938] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.390940] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.390944] pci 0000:00:1c.5:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.390947] pci 0000:00:1c.5:   bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
[    0.390952] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    0.390954] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
[    0.390958] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.390961] pci 0000:00:1c.6:   bridge window [mem 0xd0600000-0xd07fffff 64bit pref]
[    0.390966] pci 0000:00:1c.7: PCI bridge to [bus 01]
[    0.390968] pci 0000:00:1c.7:   bridge window [io  0xb000-0xbfff]
[    0.390972] pci 0000:00:1c.7:   bridge window [mem 0xf7b00000-0xf7bfffff]
[    0.390975] pci 0000:00:1c.7:   bridge window [mem 0xdff00000-0xdfffffff 64bit pref]
[    0.390980] pci 0000:00:1e.0: PCI bridge to [bus 06]
[    0.390982] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.390986] pci 0000:00:1e.0:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.391004] pci 0000:00:1c.4: enabling device (0104 -> 0107)
[    0.391009] pci 0000:00:1c.5: enabling device (0106 -> 0107)
[    0.391031] pci 0000:00:1e.0: setting latency timer to 64
[    0.391034] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.391036] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.391038] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.391039] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.391041] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xf7ffffff]
[    0.391042] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff]
[    0.391044] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    0.391045] pci_bus 0000:05: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.391047] pci_bus 0000:05: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.391049] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.391050] pci_bus 0000:04: resource 1 [mem 0xd0000000-0xd01fffff]
[    0.391052] pci_bus 0000:04: resource 2 [mem 0xd0200000-0xd03fffff 64bit pref]
[    0.391053] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.391055] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.391056] pci_bus 0000:03: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
[    0.391058] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.391060] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.391061] pci_bus 0000:02: resource 2 [mem 0xd0600000-0xd07fffff 64bit pref]
[    0.391063] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.391064] pci_bus 0000:01: resource 1 [mem 0xf7b00000-0xf7bfffff]
[    0.391066] pci_bus 0000:01: resource 2 [mem 0xdff00000-0xdfffffff 64bit pref]
[    0.391067] pci_bus 0000:06: resource 0 [io  0xe000-0xefff]
[    0.391069] pci_bus 0000:06: resource 1 [mem 0xf7f00000-0xf7ffffff]
[    0.391070] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
[    0.391072] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
[    0.391074] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[    0.391075] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
[    0.391077] pci_bus 0000:06: resource 8 [mem 0xd0000000-0xf7ffffff]
[    0.391078] pci_bus 0000:06: resource 9 [mem 0xfc000000-0xfed8ffff]
[    0.391080] pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
[    0.391081] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[    0.391111] NET: Registered protocol family 2
[    0.391243] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.391414] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.391554] TCP: Hash tables configured (established 32768 bind 32768)
[    0.391576] TCP: reno registered
[    0.391582] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.391612] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.391696] NET: Registered protocol family 1
[    0.391778] pci 0000:05:00.0: Boot video device
[    0.391835] PCI: CLS 32 bytes, default 64
[    0.391863] Unpacking initramfs...
[    0.441719] Freeing initrd memory: 2960k freed
[    0.442083] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.442086] software IO TLB [mem 0xcbe6e000-0xcfe6e000] (64MB) mapped at [ffff8800cbe6e000-ffff8800cfe6dfff]
[    0.442413] audit: initializing netlink socket (disabled)
[    0.442429] type=2000 audit(1367008675.236:1): initialized
[    0.453950] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.455230] VFS: Disk quotas dquot_6.5.2
[    0.455270] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.455420] msgmni has been set to 7905
[    0.455646] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.455674] io scheduler noop registered
[    0.455676] io scheduler deadline registered
[    0.455680] io scheduler cfq registered (default)
[    0.455959] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[    0.455961] vesafb: scrolling: redraw
[    0.455962] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.456350] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004800000, using 5824k, total 5824k
[    0.647099] Console: switching to colour frame buffer device 175x65
[    0.836899] fb0: VESA VGA frame buffer device
[    0.836908] intel_idle: MWAIT substates: 0x1120
[    0.836913] intel_idle: v0.4 model 0x1E
[    0.836914] intel_idle: lapic_timer_reliable_states 0x2
[    0.836954] GHES: HEST is not enabled!
[    0.837004] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.857547] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.857890] Linux agpgart interface v0.103
[    0.857949] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.860653] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.860678] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.860767] mousedev: PS/2 mouse device common for all mice
[    0.860809] rtc_cmos 00:02: RTC can wake from S4
[    0.860928] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.860953] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.861011] cpuidle: using governor ladder
[    0.861077] cpuidle: using governor menu
[    0.861079] EFI Variables Facility v0.08 2004-May-17
[    0.861120] drop_monitor: Initializing network drop monitor service
[    0.861187] TCP: cubic registered
[    0.861270] NET: Registered protocol family 10
[    0.861409] NET: Registered protocol family 17
[    0.861416] Key type dns_resolver registered
[    0.861612] PM: Hibernation image not present or could not be loaded.
[    0.861619] registered taskstats version 1
[    0.862279]   Magic number: 9:644:650
[    0.862314] acpi LNXCPU:03: hash matches
[    0.862370] rtc_cmos 00:02: setting system clock to 2013-04-26 20:37:56 UTC (1367008676)
[    0.863603] Freeing unused kernel memory: 820k freed
[    0.863740] Write protecting the kernel read-only data: 8192k
[    0.867252] Freeing unused kernel memory: 1224k freed
[    0.868850] Freeing unused kernel memory: 440k freed
[    0.875189] systemd-udevd[57]: starting version 202
[    0.892310] ACPI: bus type usb registered
[    0.892342] usbcore: registered new interface driver usbfs
[    0.892360] usbcore: registered new interface driver hub
[    0.892423] usbcore: registered new device driver usb
[    0.892866] SCSI subsystem initialized
[    0.893648] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.894532] ehci-pci: EHCI PCI platform driver
[    0.894561] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.894564] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.894571] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.894582] ehci-pci 0000:00:1a.0: debug port 2
[    0.898484] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[    0.898499] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7afe000
[    0.898661] ACPI: bus type scsi registered
[    0.898703] libata version 3.00 loaded.
[    0.898858] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.898861] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[    0.898866] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    0.898889] pata_jmicron 0000:02:00.1: setting latency timer to 64
[    0.899091] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.899097] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[    0.899102] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[    0.899107] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[    0.899113] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[    0.899819] xHCI xhci_add_endpoint called for root hub
[    0.899821] xHCI xhci_check_bandwidth called for root hub
[    0.899848] hub 2-0:1.0: USB hub found
[    0.899854] scsi0 : pata_jmicron
[    0.899855] hub 2-0:1.0: 2 ports detected
[    0.899938] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.899941] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    0.900062] scsi1 : pata_jmicron
[    0.900186] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[    0.900188] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[    0.900208] ahci 0000:02:00.0: version 3.0
[    0.900337] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.900340] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.900704] scsi2 : ahci
[    0.900906] scsi3 : ahci
[    0.900954] ata3: SATA max UDMA/133 abar m8192@0xf7cfe000 port 0xf7cfe100 irq 18
[    0.900957] ata4: SATA max UDMA/133 abar m8192@0xf7cfe000 port 0xf7cfe180 irq 18
[    0.902648] xHCI xhci_add_endpoint called for root hub
[    0.902650] xHCI xhci_check_bandwidth called for root hub
[    0.902695] hub 3-0:1.0: USB hub found
[    0.902705] hub 3-0:1.0: 2 ports detected
[    0.908458] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.908560] hub 1-0:1.0: USB hub found
[    0.908563] hub 1-0:1.0: 2 ports detected
[    0.908684] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.908687] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.908692] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.908702] ehci-pci 0000:00:1d.0: debug port 2
[    0.912614] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[    0.912628] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7afd000
[    0.921807] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.922200] hub 4-0:1.0: USB hub found
[    0.922203] hub 4-0:1.0: 2 ports detected
[    0.922286] ata_piix 0000:00:1f.2: version 2.13
[    0.922301] ata_piix 0000:00:1f.2: MAP [
[    0.922302]  P0 P2 P1 P3 ]
[    0.922329] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.922885] scsi4 : ata_piix
[    0.923390] scsi5 : ata_piix
[    0.923741] ata5: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
[    0.923745] ata6: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
[    0.923759] ata_piix 0000:00:1f.5: MAP [
[    0.923760]  P0 -- P1 -- ]
[    0.923784] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.923951] scsi6 : ata_piix
[    0.924274] scsi7 : ata_piix
[    0.924564] ata7: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
[    0.924567] ata8: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
[    0.951836] firewire_ohci 0000:06:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    1.216364] ata4: SATA link down (SStatus 0 SControl 300)
[    1.216471] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.221344] ata3: SATA link down (SStatus 0 SControl 300)
[    1.252180] ata7: SATA link down (SStatus 0 SControl 300)
[    1.263097] ata8: SATA link down (SStatus 0 SControl 300)
[    1.338351] hub 1-1:1.0: USB hub found
[    1.338573] hub 1-1:1.0: 6 ports detected
[    1.440700] tsc: Refined TSC clocksource calibration: 2674.966 MHz
[    1.440707] Switching to clocksource tsc
[    1.444033] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.451003] firewire_core 0000:06:03.0: created device fw0: GUID 001e8c0001fee812, S400
[    1.568045] hub 4-1:1.0: USB hub found
[    1.568193] hub 4-1:1.0: 8 ports detected
[    1.647191] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    1.713594] ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.713610] ata5.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.713850] ata6.00: SATA link down (SStatus 0 SControl 300)
[    1.713865] ata6.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.730371] ata6.01: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL01, max UDMA/100
[    1.743651] ata6.01: configured for UDMA/100
[    1.747140] ata5.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
[    1.747145] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.747451] ata5.01: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[    1.747455] ata5.01: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.770425] ata5.00: configured for UDMA/133
[    1.783857] ata5.01: configured for UDMA/133
[    1.784175] scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
[    1.784487] scsi 4:0:1:0: Direct-Access     ATA      ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[    1.785214] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.785230] sd 4:0:1:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.785268] sd 4:0:0:0: [sda] Write Protect is off
[    1.785271] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.785299] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.785306] sd 4:0:1:0: [sdb] Write Protect is off
[    1.785309] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.785344] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.788430] scsi 5:0:1:0: CD-ROM            HL-DT-ST DVDRAM GH22LS50  TL01 PQ: 0 ANSI: 5
[    1.799605] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.799610] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.799918] sr 5:0:1:0: Attached scsi CD-ROM sr0
[    1.822330]  sdb: sdb1
[    1.844330]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    1.850247] sd 4:0:1:0: [sdb] Attached SCSI disk
[    1.850284] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.913075] usb 4-1.5: new low-speed USB device number 3 using ehci-pci
[    2.006263] usbcore: registered new interface driver usbhid
[    2.006265] usbhid: USB HID core driver
[    2.006767] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input0
[    2.007103] hid-generic 0003:413C:3016.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[    2.079496] usb 4-1.6: new low-speed USB device number 4 using ehci-pci
[    2.171602] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input1
[    2.171731] hid-generic 0003:0603:00F2.0002: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input0
[    2.177205] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/input/input2
[    2.177372] hid-generic 0003:0603:00F2.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.0-1.6/input1
[    2.242439] usb 4-1.8: new high-speed USB device number 5 using ehci-pci
[    2.594528] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    3.207207] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    3.222867] systemd[1]: Set hostname to <pc_escritorio>.
[    3.790334] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.790374] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.790385] systemd[1]: Starting Remote File Systems.
[    3.790394] systemd[1]: Reached target Remote File Systems.
[    3.790401] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[    3.790410] systemd[1]: Starting LVM2 metadata daemon socket.
[    3.790435] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.790443] systemd[1]: Starting Delayed Shutdown Socket.
[    3.790459] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.790465] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    3.790485] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.790492] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.790506] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.790528] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    3.790609] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.790617] systemd[1]: Starting Encrypted Volumes.
[    3.790625] systemd[1]: Reached target Encrypted Volumes.
[    3.790673] systemd[1]: Starting udev Kernel Socket.
[    3.790691] systemd[1]: Listening on udev Kernel Socket.
[    3.790732] systemd[1]: Starting udev Control Socket.
[    3.790751] systemd[1]: Listening on udev Control Socket.
[    3.790761] systemd[1]: Starting Journal Socket.
[    3.790793] systemd[1]: Listening on Journal Socket.
[    3.790803] systemd[1]: Starting Setup Virtual Console...
[    3.816804] systemd[1]: Starting Load Kernel Modules...
[    3.822519] systemd[1]: Mounting Huge Pages File System...
[    3.829146] systemd[1]: Mounting Debug File System...
[    3.842365] systemd[1]: Starting udev Coldplug all Devices...
[    3.849326] systemd[1]: Mounting POSIX Message Queue File System...
[    3.895399] systemd[1]: Started Set Up Additional Binary Formats.
[    3.895425] systemd[1]: Starting Journal Service...
[    3.899230] systemd[1]: Started Journal Service.
[    3.899259] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    3.899297] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.899343] systemd[1]: Starting Create static device nodes in /dev...
[    4.341801] systemd[1]: Starting Apply Kernel Variables...
[    4.348053] systemd[1]: Expecting device dev-sda7.device...
[    4.348073] systemd[1]: Started File System Check on Root Device.
[    4.348087] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.354687] systemd[1]: Expecting device dev-sdc1.device...
[    4.354699] systemd[1]: Expecting device dev-sda3.device...
[    4.354710] systemd[1]: Expecting device dev-sda6.device...
[    4.354720] systemd[1]: Expecting device dev-sdb1.device...
[    4.544761] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[    4.986815] FS-Cache: Loaded
[    5.005162] RPC: Registered named UNIX socket transport module.
[    5.005169] RPC: Registered udp transport module.
[    5.005170] RPC: Registered tcp transport module.
[    5.005171] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.026296] FS-Cache: Netfs 'nfs' registered for caching
[    5.068477] vboxguest: PCI device not found, probably running on physical hardware.
[    5.082933] vboxguest: PCI device not found, probably running on physical hardware.
[    5.086870] systemd-udevd[144]: starting version 202
[    5.161623] [drm] Initialized drm 1.1.0 20060810
[    5.634633] ACPI: Requesting acpi_cpufreq
[    5.705282] ATK0110 ATK0110:00: EC enabled
[    5.721889] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMRG 1 (20121018/utaddress-251)
[    5.721894] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.721897] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS1 1 (20121018/utaddress-251)
[    5.721900] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPS0 2 (20121018/utaddress-251)
[    5.721902] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.721903] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS1 1 (20121018/utaddress-251)
[    5.721906] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPS0 2 (20121018/utaddress-251)
[    5.721908] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.721925] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.725440] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    5.725445] ACPI: Power Button [PWRB]
[    5.725478] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    5.725480] ACPI: Power Button [PWRF]
[    5.802281] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    5.836904] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4
[    5.890984] wmi: Mapper loaded
[    5.899753] EDAC MC: Ver: 3.0.0
[    5.908589] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:3f:03.0
[    5.908619] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:3f:03.0' (POLLED)
[    5.908624] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[    5.972216] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    6.060583] iTCO_vendor_support: vendor-support=0
[    6.067690] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    6.067855] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
[    6.068097] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.281028] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4
[    6.284040] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4
[    6.284351] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4
[    6.284686] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    6.288648] gpio_ich: GPIO from 180 to 255 on gpio_ich
[    6.320963] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.321254] r8169 0000:01:00.0: irq 50 for MSI/MSI-X
[    6.321397] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xffffc90000614000, 00:26:18:9c:ba:13, XID 083000c0 IRQ 50
[    6.321399] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    6.441337] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    6.685343] [drm] radeon defaulting to kernel modesetting.
[    6.685346] [drm] radeon kernel modesetting enabled.
[    6.685378] checking generic (e0000000 5b0000) vs hw (e0000000 10000000)
[    6.685379] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[    6.685392] Console: switching to colour dummy device 80x25
[    6.685607] [drm] initializing kernel modesetting (RV740 0x1002:0x94B3 0x174B:0x1250).
[    6.685637] [drm] register mmio base: 0xF7EE0000
[    6.685638] [drm] register mmio size: 65536
[    6.685702] ATOM BIOS: WALDEN
[    6.685719] radeon 0000:05:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    6.685720] radeon 0000:05:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[    6.685724] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[    6.685725] [drm] Detected VRAM RAM=512M, BAR=256M
[    6.685726] [drm] RAM width 128bits DDR
[    6.685762] [TTM] Zone  kernel: Available graphics memory: 2024954 kiB
[    6.685764] [TTM] Initializing pool allocator
[    6.685768] [TTM] Initializing DMA pool allocator
[    6.685783] [drm] radeon: 512M of VRAM memory ready
[    6.685784] [drm] radeon: 512M of GTT memory ready.
[    6.685795] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.685795] [drm] Driver supports precise vblank timestamp query.
[    6.685841] radeon 0000:05:00.0: irq 51 for MSI/MSI-X
[    6.685850] radeon 0000:05:00.0: radeon: using MSI.
[    6.685879] [drm] radeon: irq initialized.
[    6.685882] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    6.686519] [drm] probing gen 2 caps for device 8086:3b42 = 1/0
[    6.686545] [drm] Loading RV730 Microcode
[    6.783110] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    6.783186] radeon 0000:05:00.0: WB enabled
[    6.783189] radeon 0000:05:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880128cefc00
[    6.783191] radeon 0000:05:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880128cefc0c
[    6.829909] [drm] ring test on 0 succeeded in 1 usecs
[    6.829970] [drm] ring test on 3 succeeded in 1 usecs
[    6.830184] [drm] ib test on ring 0 succeeded in 0 usecs
[    6.830211] [drm] ib test on ring 3 succeeded in 0 usecs
[    6.830369] [drm] Radeon Display Connectors
[    6.830370] [drm] Connector 0:
[    6.830371] [drm]   VGA-1
[    6.830372] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    6.830373] [drm]   Encoders:
[    6.830374] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    6.830375] [drm] Connector 1:
[    6.830376] [drm]   HDMI-A-1
[    6.830376] [drm]   HPD4
[    6.830377] [drm]   DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[    6.830378] [drm]   Encoders:
[    6.830379] [drm]     DFP2: INTERNAL_UNIPHY1
[    6.830380] [drm] Connector 2:
[    6.830380] [drm]   DVI-I-1
[    6.830381] [drm]   HPD1
[    6.830382] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[    6.830383] [drm]   Encoders:
[    6.830384] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    6.830384] [drm]     DFP1: INTERNAL_UNIPHY
[    6.830410] [drm] Internal thermal controller with fan control
[    6.830449] [drm] radeon: power management initialized
[    6.879370] media: Linux media interface: v0.10
[    6.886455] Linux video capture interface: v2.00
[    6.903939] [drm] fb mappable at 0xE0142000
[    6.903940] [drm] vram apper at 0xE0000000
[    6.903941] [drm] size 8294400
[    6.903942] [drm] fb depth is 24
[    6.903943] [drm]    pitch is 7680
[    6.904015] fbcon: radeondrmfb (fb0) is primary device
[    6.948625] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0821)
[    7.010583] Bluetooth: Core ver 2.16
[    7.010594] NET: Registered protocol family 31
[    7.010595] Bluetooth: HCI device and connection manager initialized
[    7.010600] Bluetooth: HCI socket layer initialized
[    7.010602] Bluetooth: L2CAP socket layer initialized
[    7.010605] Bluetooth: SCO socket layer initialized
[    7.040876] usbcore: registered new interface driver btusb
[    7.073485] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[    7.081837] vboxguest: PCI device not found, probably running on physical hardware.
[    7.091110] vboxguest: PCI device not found, probably running on physical hardware.
[    7.102993] Console: switching to colour frame buffer device 240x67
[    7.117325] radeon 0000:05:00.0: fb0: radeondrmfb frame buffer device
[    7.117327] radeon 0000:05:00.0: registered panic notifier
[    7.117330] [drm] Initialized radeon 2.29.0 20080528 for 0000:05:00.0 on minor 0
[    7.142964] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    7.143057] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    7.143144] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    7.143224] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    7.143294] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.143370] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    7.143441] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    7.143515] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    7.143759] hda-intel 0000:05:00.1: Handle VGA-switcheroo audio client
[    7.143890] snd_hda_intel 0000:05:00.1: irq 53 for MSI/MSI-X
[    7.154101] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:05:00.1/sound/card1/input14
[    7.161734] input: UVC Camera (046d:0821) as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.8/4-1.8:1.2/input/input15
[    7.162124] usbcore: registered new interface driver uvcvideo
[    7.162126] USB Video Class driver (1.1.1)
[    7.217631] usbcore: registered new interface driver snd-usb-audio
[    8.045197] fuse init (API version 7.20)
[    8.116662] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[    8.190859] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null)
[    8.262115] Adding 995992k swap on /dev/sda7.  Priority:-1 extents:1 across:995992k 
[    8.486625] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[    9.408512] r8169 0000:01:00.0 eth0: link down
[    9.408517] r8169 0000:01:00.0 eth0: link down
[    9.408539] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.868316] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.868325] Bluetooth: BNEP socket layer initialized
[   10.959362] systemd-logind[336]: Watching system buttons on /dev/input/event4 (Power Button)
[   10.959417] systemd-logind[336]: Watching system buttons on /dev/input/event3 (Power Button)
[   11.032246] Bluetooth: RFCOMM TTY layer initialized
[   11.032256] Bluetooth: RFCOMM socket layer initialized
[   11.032257] Bluetooth: RFCOMM ver 1.11
[   11.160493] r8169 0000:01:00.0 eth0: link up
[   11.160504] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   13.092853] vboxdrv: Found 4 processor cores.
[   13.093515] vboxdrv: fAsync=0 offMin=0x403 offMax=0x26059
[   13.093618] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   13.093620] vboxdrv: Successfully loaded version 4.2.12_OSE (interface 0x001a0004).
[   13.182193] vboxpci: IOMMU not found (not registered)
[   27.665111] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=0
[   27.975143] EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=0

Can be due to the last two? How can I fix it?

Offline

#2 2013-04-27 14:44:26

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 12,975

Re: Arch freezes for a few seconds from time to time

It could be related.  Anything interesting in the journal?

A "Freeze" is often an indication you are waiting for a disk.  Either through having problems reading a sector on the disk, or by "thrashing" as you swap virtual memory to/from disk.


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Like you, I have no idea what you are doing, but I am pretty sure it is wrong...Jasonwryan
----
How to Ask Questions the Smart Way

Offline

#3 2013-04-27 14:48:59

graysky
Member
From: /run/user/1000
Registered: 2008-12-01
Posts: 8,532
Website

Re: Arch freezes for a few seconds from time to time

+1 for HDD.  Recommend you use smartmontools to understand if errors have been thrown.  Here is an example of errors on one of my machines:

# smartctl --all /dev/sda
...
Error 442 occurred at disk power-on lifetime: 24196 hours (1008 days + 4 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 c3 8d 75 e1  Error: UNC at LBA = 0x01758dc3 = 24481219

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 c0 8d 75 01 00      01:10:53.771  READ DMA
  ca 00 08 b8 8d 75 01 00      01:10:53.770  WRITE DMA
  c8 00 08 b8 8d 75 01 00      01:10:53.770  READ DMA
  ca 00 08 b8 8d 75 01 00      01:10:53.770  WRITE DMA
  c8 00 08 b8 8d 75 01 00      01:10:53.769  READ DMA

Smartctl can do short test and if completes without errors, try a long test.  Still no errors?  Good.  You can look around for bad sectors on each partition `e2fsck -cckx /dev/sdXX`

EDIT:  ...usually dmesg will show you when bad things are happening with your filesystem and bad blocks.  I recently had to recover a system that suffered this fate and the dmesg output was rich with these errors.

% sudo e2fsck -cckv LABEL=archlive
e2fsck 1.42.7 (21-Jan-2013)
Checking for bad blocks (non-destructive read-write test)
Testing with random pattern: done                                                 
arch32: Updating bad block inode.
Pass 1: Checking inodes, blocks, and sizes

Running additional passes to resolve blocks claimed by more than one inode...
Pass 1B: Rescanning for multiply-claimed blocks
Multiply-claimed block(s) in inode 404766: 3658656
Pass 1C: Scanning directories for inodes with multiply-claimed blocks
Pass 1D: Reconciling multiply-claimed blocks
(There are 1 inodes containing multiply-claimed blocks.)

File /usr/share/icons/gnome/icon-theme.cache (inode #404766, mod time Mon Apr 22 16:01:20 2013) 
  has 1 multiply-claimed block(s), shared with 1 file(s):
	<The bad blocks inode> (inode #1, mod time Mon Apr 22 16:19:28 2013)
Clone multiply-claimed blocks<y>? yes
Error reading block 3658656 (Attempt to read block from filesystem resulted in short read).  Ignore error<y>? yes
Force rewrite<y>? yes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Free blocks count wrong for group #0 (22605, counted=22604).
Fix<y>? yes
Free blocks count wrong for group #111 (6069, counted=6070).
Fix<y>? yes

arch32: ***** FILE SYSTEM WAS MODIFIED *****

      105142 inodes used (11.46%, out of 917504)
         516 non-contiguous files (0.5%)
          41 non-contiguous directories (0.0%)
             # of inodes with ind/dind/tind blocks: 0/0/0
             Extent depth histogram: 92177/120
     1051659 blocks used (28.66%, out of 3670016)
           3 bad blocks
           1 large file

       84048 regular files
        7976 directories
           0 character device files
           0 block device files
           0 fifos
        1494 links
       13107 symbolic links (12835 fast symbolic links)
           2 sockets
------------
      106627 files

Long story short, I had to reinstall to another partition despite locking out these badblocks.  I do not think this is your problem as I stated above.  See what smartlctl says on the short and long tests.

Last edited by graysky (2013-04-27 16:50:10)


CPU-optimized Linux-ck packages @ Repo-ck  • AUR packagesZsh and other configs

Offline

#4 2013-04-28 15:12:38

doblerone
Member
Registered: 2011-12-08
Posts: 159

Re: Arch freezes for a few seconds from time to time

no errors at all on short and long scans with smartctl.

Offline

Board footer

Powered by FluxBB