You are not logged in.

#1 2013-05-09 13:10:17

ArchiMark
Member
From: California, USA
Registered: 2012-04-11
Posts: 101

Selected Enlightenment in GDM But Just See Gray Screen

After much work, I got GDM installed and working OK on my little Toshiba Libretto U100 laptop....which I just installed Arch the other day...

Installed Enlightenment17 and install seemed to go OK....

When logging in with GDM, I can select Enlightenment in the Session selector.

But after that all I get is a gray color screen with a cursor on it, but nothing else. I can move the cursor with the trackpoint.

If I left or right click on the gray screen, nothing happens. Don't see any menus pop-up, etc....

Also, now the fan is on all the time, which is not good....

Any suggestions?

Thanks!

Last edited by ArchiMark (2013-05-09 13:35:49)


Silicon Valley Digerati & Arch Noob
GPD Pocket 3, Thinkpad 230t

Offline

#2 2013-05-09 16:29:17

ArchiMark
Member
From: California, USA
Registered: 2012-04-11
Posts: 101

Re: Selected Enlightenment in GDM But Just See Gray Screen

One more thing...don't know if this relates to Enlightenment issue or not...but

if I do startx from console, I get the error message:

xauth: timeout in locking authority file /home/marks/.Xauthority

Weird thing is that I don't have a .Xauthority file.....I've checked...but do have .xinitrc file which I've edited...

Also, I have been able to do startx and get to the screen where you see several different size xterm windows and can move cursor around and can type in them at the prompt....


Silicon Valley Digerati & Arch Noob
GPD Pocket 3, Thinkpad 230t

Offline

#3 2013-05-10 07:53:09

pressh
Developer/TU
From: Netherlands
Registered: 2005-08-14
Posts: 1,719

Re: Selected Enlightenment in GDM But Just See Gray Screen

I had a similar experience yesterday when updating the EFL libraries to their latest versions. In my case it was related to the '--enable-thread-safety' configure flag in ecore, which I have now removed in the update.

Can you try the updated packages in the repo, do they solve it for you?

Offline

#4 2013-05-11 01:44:09

ArchiMark
Member
From: California, USA
Registered: 2012-04-11
Posts: 101

Re: Selected Enlightenment in GDM But Just See Gray Screen

Thanks for your input...

In meantime, I got frustrated with trying to get it to work. So, removed e17 and installed LXDE....

Strange thing is that after logging in with GDM, it doesn't open up LXDE either, get the gray screen, even though I did all the configurations per GDM and LXDE wiki pages.....

However, the difference with LXDE is that it will open and run properly if I do startx from the console.....strange....

If I get time, I may try e17 again....but in meantime, would like to get LXDE to open up after login.....


Silicon Valley Digerati & Arch Noob
GPD Pocket 3, Thinkpad 230t

Offline

#5 2013-05-11 01:45:56

anonymous_user
Member
Registered: 2009-08-28
Posts: 3,059

Re: Selected Enlightenment in GDM But Just See Gray Screen

Why not just get rid of GDM and try LightDM, LXDM, or Slim instead?

Offline

#6 2013-05-11 06:38:58

89c51
Member
Registered: 2012-06-05
Posts: 741

Re: Selected Enlightenment in GDM But Just See Gray Screen

anonymous_user wrote:

Why not just get rid of GDM and try LightDM, LXDM, or Slim instead?


I second that. LXDM (until and if we get something efl based) and E17 work for me.

Offline

#7 2013-05-11 13:14:21

Chrishas
Member
Registered: 2012-11-03
Posts: 26

Re: Selected Enlightenment in GDM But Just See Gray Screen

Removing or renaming the ~/.e directory could help.

Offline

#8 2013-05-12 01:22:19

ArchiMark
Member
From: California, USA
Registered: 2012-04-11
Posts: 101

Re: Selected Enlightenment in GDM But Just See Gray Screen

anonymous_user wrote:

Why not just get rid of GDM and try LightDM, LXDM, or Slim instead?

89c51 wrote:
anonymous_user wrote:

Why not just get rid of GDM and try LightDM, LXDM, or Slim instead?


I second that. LXDM (until and if we get something efl based) and E17 work for me.


Good idea....thanks...

Just removed GDM and installed LXDM....

Did editing of config files for LXDM and LXDE....

Rebooted and LXDM does not run.....  sad

Don't know if this is relevant or not....

But during boot up, I saw the following message in console:

[ OK ] Reached target Graphical Interface

Last edited by ArchiMark (2013-05-12 01:42:52)


Silicon Valley Digerati & Arch Noob
GPD Pocket 3, Thinkpad 230t

Offline

#9 2013-05-12 01:24:02

ArchiMark
Member
From: California, USA
Registered: 2012-04-11
Posts: 101

Re: Selected Enlightenment in GDM But Just See Gray Screen

Chrishas wrote:

Removing or renaming the ~/.e directory could help.

Thanks, but too late now....

Per my earlier post above, I removed e17 and installed LXDE....which runs OK after I do startx....


Silicon Valley Digerati & Arch Noob
GPD Pocket 3, Thinkpad 230t

Offline

#10 2013-05-12 03:54:06

henk
Member
From: Weert, Netherlands
Registered: 2013-01-01
Posts: 334

Re: Selected Enlightenment in GDM But Just See Gray Screen

ArchiMark wrote:

Just removed GDM and installed LXDM....

Did editing of config files for LXDM and LXDE....

Rebooted and LXDM does not run.....

Actually, if you use LXDM with LXDE, you don't have to mess up the config files; LXDM will start
LXDE by default. Just enable lxdm.service and reboot.

Do you have your openbox configuration set up properly?

Also LXDM doesn't use the .xinitrc for booting a DE, so you can comment these out in both
.xinitrc files (root and user).

Offline

#11 2013-05-12 04:53:48

ArchiMark
Member
From: California, USA
Registered: 2012-04-11
Posts: 101

Re: Selected Enlightenment in GDM But Just See Gray Screen

henk wrote:
ArchiMark wrote:

Just removed GDM and installed LXDM....

Did editing of config files for LXDM and LXDE....

Rebooted and LXDM does not run.....

Actually, if you use LXDM with LXDE, you don't have to mess up the config files; LXDM will start
LXDE by default. Just enable lxdm.service and reboot.

Do you have your openbox configuration set up properly?

Also LXDM doesn't use the .xinitrc for booting a DE, so you can comment these out in both
.xinitrc files (root and user).

Thanks for your help...

You're right, I should have said that I check wiki pages regarding configuration for LXDM and LXDE....

I must have already enabled lxdm.service as when I try to do that now, I get message:

Failed to issue method:  File exists


I commented out LXDE in .xinitrc....but now when I reboot, I still don't see LXDM....

Also, now when I login using console and do startx, LXDE does not run....

Here's error messages I now get in /var/log/Xorg.0.log:

(EE) Failed to load module "modesetting" (module does not exist, 0)
(EE) Failed to load module "fbdev"  (module does not exist, 0)


Any suggestions ?

Thanks.


Silicon Valley Digerati & Arch Noob
GPD Pocket 3, Thinkpad 230t

Offline

#12 2013-05-12 06:45:35

henk
Member
From: Weert, Netherlands
Registered: 2013-01-01
Posts: 334

Re: Selected Enlightenment in GDM But Just See Gray Screen

It is logical that LXDE wil not start using startx; you have commented it out in .xinitrc.

You could try as user after login: sudo systemctl start lxdm.service.

If you enabled lxdm.sevice properly, it should be linked to the display-manager.service. Check /etc/systemd/system/ for the display-manager.service
It should look like this:

[Unit]
Description=LXDE Display Manager
After=systemd-user-sessions.service

[Service]
ExecStart=/usr/bin/lxdm

[Install]
Alias=display-manager.service

B.T.W. you removed GDM, but did you disable gdm.service BEFORE you enabled lxdm.sevice?

Edit: corrected the Service path to /usr/bin/...

Last edited by henk (2013-05-12 09:53:21)

Offline

#13 2013-05-12 09:51:25

henk
Member
From: Weert, Netherlands
Registered: 2013-01-01
Posts: 334

Re: Selected Enlightenment in GDM But Just See Gray Screen

Offline

#14 2013-05-12 15:59:05

ArchiMark
Member
From: California, USA
Registered: 2012-04-11
Posts: 101

Re: Selected Enlightenment in GDM But Just See Gray Screen

henk wrote:

It is logical that LXDE wil not start using startx; you have commented it out in .xinitrc.

You could try as user after login: sudo systemctl start lxdm.service.

If you enabled lxdm.sevice properly, it should be linked to the display-manager.service. Check /etc/systemd/system/ for the display-manager.service
It should look like this:

[Unit]
Description=LXDE Display Manager
After=systemd-user-sessions.service

[Service]
ExecStart=/usr/bin/lxdm

[Install]
Alias=display-manager.service

B.T.W. you removed GDM, but did you disable gdm.service BEFORE you enabled lxdm.sevice?

Edit: corrected the Service path to /usr/bin/...


Yes, oops, I realize now that I misread your previous post about .xinitrc....fixed that....

As for GDM, no, didn't think to disable that service before removing gdm or enabling lxdm.service...

OK, some good news....after I do 'sudo systemctl start lxdm.service', LXDM starts up!....then opened up LXDE...but something strange in LXDE...right mouse button no longer works there....

I checked my display-manager.service file and after checking where lxdm is located. In my install, it is in 'sbin' not 'bin' as noted on that other post...so, left display-manager.service as-is.

Shutdown and rebooted...

Still does not boot up to LXDM...

Another strange thing is that I went to check on display-manager.service again and now the file is empty when I open it!....not sure how that happened...so, will try to recreate it....

Thanks again for all your help...


Silicon Valley Digerati & Arch Noob
GPD Pocket 3, Thinkpad 230t

Offline

#15 2013-05-12 18:56:04

henk
Member
From: Weert, Netherlands
Registered: 2013-01-01
Posts: 334

Re: Selected Enlightenment in GDM But Just See Gray Screen

Your right mouse either will show some dektop proporties and whatnot, or the openbox-menu. You can change that in the main menu. If that doesn't work
properly, you messed op during the configuration, or even during the installation, in not installing everything that was needed.

Your display-manager.service is empty on reboot because (and I'm guessing here) it is still not linked to lxdm.service.

Try:

systemctl disable gdm.service

then

 systemctl enable --force lxdm.service

forcing it is not a good approach, ever, but it helped me once.

As for the location of lxdm, be aware of the fact that with the next update you do, it will change.

Last edited by henk (2013-05-12 18:57:13)

Offline

#16 2013-05-12 20:05:59

ArchiMark
Member
From: California, USA
Registered: 2012-04-11
Posts: 101

Re: Selected Enlightenment in GDM But Just See Gray Screen

henk wrote:

Your right mouse either will show some dektop proporties and whatnot, or the openbox-menu. You can change that in the main menu. If that doesn't work
properly, you messed op during the configuration, or even during the installation, in not installing everything that was needed.

To clarify, I was seeing the black arrow cursor before....just stopped being visible per my prior post....

Your display-manager.service is empty on reboot because (and I'm guessing here) it is still not linked to lxdm.service.

Try:

systemctl disable gdm.service

then

 systemctl enable --force lxdm.service

forcing it is not a good approach, ever, but it helped me once.

Good news!!!

Did that and rebooted.....

And for first time, it booted up to LXDM login screen!.....

Logged in and it opened up LXDE and my cursor is back!!!

So, for now, all seems good.....

As for the location of lxdm, be aware of the fact that with the next update you do, it will change.

Understand.....


So, a big 'THANKS' to you, henk for all your great help...greatly appreciated!!


Silicon Valley Digerati & Arch Noob
GPD Pocket 3, Thinkpad 230t

Offline

#17 2013-05-12 23:52:16

ArchiMark
Member
From: California, USA
Registered: 2012-04-11
Posts: 101

Re: Selected Enlightenment in GDM But Just See Gray Screen

Well, spoke a bit too soon....

Having an issue with LXDE now...

When I open a window such a terminal or preferences, etc. the window opens up tight against the upper left corner of the display.

So, the problem is that I can't see the buttons to minimize or maximize the window, etc.

Also, if I try to right click on the upper bar of the window to get menu items for resizing window that way, nothing happens...

And I can't drag windows around the desktop with the mouse anymore...

This is all strange as LXDE was working perfectly before (when I had to manually start it with startx...)

Another problem is that I can't type in a window like at the terminal command prompt. I type on keys but nothing shows up on the window...

Any suggestions?

Thanks,

Last edited by ArchiMark (2013-05-13 15:17:56)


Silicon Valley Digerati & Arch Noob
GPD Pocket 3, Thinkpad 230t

Offline

Board footer

Powered by FluxBB