Arch Linux

cptcharisma

Member

Registered: 2013-06-07

Posts: 3

Nvidia Optimus 319.23 dual screen error libgl

I have a dell xps 15 l502x that I have just installed arch with kde on.
I am unable to use open gl with using dual screen setup with nvidia optimus with nvidia GT 525M, intel cards

Here is what my xorg.conf looks like:

 
Section "ServerLayout"
    Identifier     "Layout0"

    Screen      0   "ScreenIntel" 0 0
    Screen      1   "ScreenNvidia0"    RightOf "ScreenIntel"

    Option         "Xinerama" "true"
    
EndSection


Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "MonitorNvidia0"
    VendorName     "Unknown"
    ModelName      "Samsung SyncMaster"
    ModeLine       "1280x1024" 108.88 1280 1360 1496 1712 1024 1025 1028 1060
    #HorizSync       30.0 - 81.0
    #VertRefresh     50.0 - 63.0
    Option         "DPMS"
EndSection

Section "Monitor"                                                                                                                                            
    # HorizSync source: edid, VertRefresh source: edid                                                                                                       
    Identifier     "MonitorIntel"                                                                                                                            
    VendorName     "Unknown"                                                                                                                                 
    ModelName      "Unknown"
    ModeLine       "1600x900"  119.00  1600 1696 1864 2128  900 901 904 932
    HorizSync       30.0 - 81.0
    VertRefresh     50.0 - 63.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "DeviceNvidia0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BusID          "1:0:0"
    Screen         0
EndSection

Section "Device"
    Identifier     "DeviceIntel"
    Driver         "intel"
    BusID          "0:2:0"
    Option         "monitor-LLCD"  "LLCD"
    Option         "monitor-LVCD1" "LVCD1"
    Option "Clone" "off"
EndSection


Section "Screen"
    Identifier  "ScreenNvidia0"
    Device      "DeviceNvidia0"
    Monitor     "MonitorNvidia0"
    DefaultDepth 24
    SubSection "Display"
        Depth 24
        Modes "1280x1024"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "ScreenIntel"
    Device         "DeviceIntel"
    Monitor        "MonitorIntel"
    DefaultDepth 24
    SubSection "Display"
        Depth 24
        Modes "1600x900"
    EndSubSection
EndSection

Output of a few commands :

[milind@milind-linux ~]$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 525M] (rev a1)

[milind@milind-linux ~]$ xrandr
RandR extension missing

[milind@milind-linux ~]$ glxinfo
name of display: :0
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Error: couldn't find RGB GLX visual or fbconfig
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Error: couldn't find RGB GLX visual or fbconfig

Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".

How do I get it to work?