You are not logged in.

#1 2013-06-08 22:31:23

Duxon
Member
Registered: 2010-12-01
Posts: 41

[SOLVED] After upgrade gdm and Gnome don't work.

Hi,

after I did an upgrade I had some ldconfig: errors and fixed them all using pkgfile and reinstallation of quite some packages.

But now starting gdm with

# systemctl start gdm

only leads to a black screen with a cross shaped cursor I can move. Nothing more.
Xorg works -- I'm writing this post from KDE.

I reinstalled gnome and gnome-extra. Still no success.
System is up to date.

Hopefully my logs will help, I have no idea what to do. Thanks for any help. :)

/var/log/Xorg.0.log

[   384.588] 
X.Org X Server 1.14.1
Release Date: 2013-04-17
[   384.588] X Protocol Version 11, Revision 0
[   384.588] Build Operating System: Linux 3.8.7-1-ARCH x86_64 
[   384.588] Current Operating System: Linux rolfgang 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
[   384.588] Kernel command line: cryptdevice=/dev/sda2:main root=/dev/mapper/main-root lang=de locale=de_DE.UTF-8 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux 
[   384.588] Build Date: 17 April 2013  02:37:06PM
[   384.588]  
[   384.588] Current version of pixman: 0.30.0
[   384.588] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   384.588] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   384.589] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun  9 00:18:24 2013
[   384.589] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   384.589] (==) No Layout section.  Using the first Screen section.
[   384.589] (==) No screen section available. Using defaults.
[   384.589] (**) |-->Screen "Default Screen Section" (0)
[   384.589] (**) |   |-->Monitor "<default monitor>"
[   384.590] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   384.590] (**) |   |-->Device "Intel Graphics"
[   384.590] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   384.590] (==) Automatically adding devices
[   384.590] (==) Automatically enabling devices
[   384.590] (==) Automatically adding GPU devices
[   384.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   384.590] 	Entry deleted from font path.
[   384.590] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   384.590] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/
[   384.590] (==) ModulePath set to "/usr/lib/xorg/modules"
[   384.590] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   384.590] (II) Loader magic: 0x7fcc20
[   384.590] (II) Module ABI versions:
[   384.590] 	X.Org ANSI C Emulation: 0.4
[   384.590] 	X.Org Video Driver: 14.1
[   384.590] 	X.Org XInput driver : 19.1
[   384.590] 	X.Org Server Extension : 7.0
[   384.591] (II) config/udev: Adding drm device (/dev/dri/card0)
[   384.594] (--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
[   384.594] Initializing built-in extension Generic Event Extension
[   384.594] Initializing built-in extension SHAPE
[   384.594] Initializing built-in extension MIT-SHM
[   384.594] Initializing built-in extension XInputExtension
[   384.594] Initializing built-in extension XTEST
[   384.594] Initializing built-in extension BIG-REQUESTS
[   384.594] Initializing built-in extension SYNC
[   384.594] Initializing built-in extension XKEYBOARD
[   384.594] Initializing built-in extension XC-MISC
[   384.594] Initializing built-in extension SECURITY
[   384.594] Initializing built-in extension XINERAMA
[   384.594] Initializing built-in extension XFIXES
[   384.594] Initializing built-in extension RENDER
[   384.594] Initializing built-in extension RANDR
[   384.594] Initializing built-in extension COMPOSITE
[   384.594] Initializing built-in extension DAMAGE
[   384.594] Initializing built-in extension MIT-SCREEN-SAVER
[   384.594] Initializing built-in extension DOUBLE-BUFFER
[   384.594] Initializing built-in extension RECORD
[   384.595] Initializing built-in extension DPMS
[   384.595] Initializing built-in extension X-Resource
[   384.595] Initializing built-in extension XVideo
[   384.595] Initializing built-in extension XVideo-MotionCompensation
[   384.595] Initializing built-in extension XFree86-VidModeExtension
[   384.595] Initializing built-in extension XFree86-DGA
[   384.595] Initializing built-in extension XFree86-DRI
[   384.595] Initializing built-in extension DRI2
[   384.595] (II) LoadModule: "glx"
[   384.595] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   384.595] (II) Module glx: vendor="X.Org Foundation"
[   384.595] 	compiled for 1.14.1, module version = 1.0.0
[   384.595] 	ABI class: X.Org Server Extension, version 7.0
[   384.595] (==) AIGLX enabled
[   384.596] Loading extension GLX
[   384.596] (II) LoadModule: "intel"
[   384.596] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   384.596] (II) Module intel: vendor="X.Org Foundation"
[   384.596] 	compiled for 1.14.1, module version = 2.21.9
[   384.596] 	Module class: X.Org Video Driver
[   384.596] 	ABI class: X.Org Video Driver, version 14.1
[   384.596] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
	Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
	Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
	Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
	HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT3),
	Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
	Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
	HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
	Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
	Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
	Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
	HD Graphics 4600, Iris(TM) Pro Graphics 5200,
	Haswell CRW Server (GT1), Haswell CRW Server (GT2),
	Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
	Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
	Iris(TM) Pro Graphics 5200, ValleyView PO board
[   384.597] (++) using VT number 1

[   384.602] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   384.602] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   384.602] (==) intel(0): RGB weight 888
[   384.602] (==) intel(0): Default visual is TrueColor
[   384.602] (**) intel(0): Option "AccelMethod" "sna"
[   384.603] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[   384.603] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[   384.603] (**) intel(0): Framebuffer tiled
[   384.603] (**) intel(0): Pixmaps tiled
[   384.603] (**) intel(0): "Tear free" disabled
[   384.603] (**) intel(0): Forcing per-crtc-pixmaps? no
[   384.604] (II) intel(0): Output eDP1 has no monitor section
[   384.604] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[   384.605] (II) intel(0): Output VGA1 has no monitor section
[   384.605] (II) intel(0): Output HDMI1 has no monitor section
[   384.605] (II) intel(0): Output DP1 has no monitor section
[   384.606] (II) intel(0): EDID for output eDP1
[   384.606] (II) intel(0): Manufacturer: SEC  Model: 3546  Serial#: 0
[   384.606] (II) intel(0): Year: 2011  Week: 0
[   384.606] (II) intel(0): EDID Version: 1.4
[   384.606] (II) intel(0): Digital Display Input
[   384.606] (II) intel(0): 8 bits per channel
[   384.606] (II) intel(0): Digital interface is DisplayPort
[   384.606] (II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 16
[   384.606] (II) intel(0): Gamma: 2.20
[   384.606] (II) intel(0): No DPMS capabilities specified
[   384.606] (II) intel(0): Supported color encodings: RGB 4:4:4 
[   384.606] (II) intel(0): First detailed timing is preferred mode
[   384.606] (II) intel(0): Preferred mode is native pixel format and refresh rate
[   384.606] (II) intel(0): redX: 0.590 redY: 0.340   greenX: 0.330 greenY: 0.540
[   384.606] (II) intel(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[   384.606] (II) intel(0): Manufacturer's mask: 0
[   384.606] (II) intel(0): Supported detailed timing:
[   384.606] (II) intel(0): clock: 100.4 MHz   Image Size:  293 x 165 mm
[   384.606] (II) intel(0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1792 h_border: 0
[   384.606] (II) intel(0): v_active: 900  v_sync: 902  v_sync_end 907 v_blanking: 932 v_border: 0
[   384.606] (II) intel(0): Unknown vendor-specific block f
[   384.606] (II) intel(0):  SAMSUNG
[   384.606] (II) intel(0):  LSN133KL018
[   384.606] (II) intel(0): EDID (in hex):
[   384.606] (II) intel(0): 	00ffffffffffff004ca3463500000000
[   384.606] (II) intel(0): 	00150104a51d10780209e59757548a27
[   384.606] (II) intel(0): 	22505400000001010101010101010101
[   384.606] (II) intel(0): 	010101010101382740c0608420303020
[   384.606] (II) intel(0): 	250025a5100000190000000f00000000
[   384.606] (II) intel(0): 	000000000028800a1e00000000fe0053
[   384.606] (II) intel(0): 	414d53554e470a2020202020000000fe
[   384.606] (II) intel(0): 	004c534e3133334b4c3031380a200003
[   384.606] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   384.606] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   384.606] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   384.606] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   384.606] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   384.606] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   384.606] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   384.606] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   384.606] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   384.606] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   384.606] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   384.606] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   384.606] (II) intel(0): Printing probed modes for output eDP1
[   384.606] (II) intel(0): Modeline "1600x900"x60.1  100.40  1600 1648 1680 1792  900 902 907 932 -hsync -vsync (56.0 kHz eP)
[   384.606] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   384.606] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   384.606] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   384.606] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   384.608] (II) intel(0): EDID for output VGA1
[   384.608] (II) intel(0): EDID for output HDMI1
[   384.608] (II) intel(0): EDID for output DP1
[   384.608] (II) intel(0): Output eDP1 connected
[   384.608] (II) intel(0): Output VGA1 disconnected
[   384.608] (II) intel(0): Output HDMI1 disconnected
[   384.608] (II) intel(0): Output DP1 disconnected
[   384.608] (II) intel(0): Using exact sizes for initial modes
[   384.608] (II) intel(0): Output eDP1 using initial mode 1600x900
[   384.608] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   384.608] (==) intel(0): DPI set to (96, 96)
[   384.608] (II) Loading sub module "dri2"
[   384.608] (II) LoadModule: "dri2"
[   384.608] (II) Module "dri2" already built-in
[   384.608] (==) Depth 24 pixmap format is 32 bpp
[   384.608] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[   384.608] (==) intel(0): Backing store disabled
[   384.608] (==) intel(0): Silken mouse enabled
[   384.608] (II) intel(0): HW Cursor enabled
[   384.608] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   386.414] (==) intel(0): DPMS enabled
[   386.414] (II) intel(0): [DRI2] Setup complete
[   386.414] (II) intel(0): [DRI2]   DRI driver: i965
[   386.414] (II) intel(0): direct rendering: DRI2 Enabled
[   386.414] (==) intel(0): hotplug detection: "enabled"
[   386.415] (--) RandR disabled
[   386.430] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   386.430] (II) AIGLX: enabled GLX_INTEL_swap_event
[   386.430] (II) AIGLX: enabled GLX_ARB_create_context
[   386.430] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   386.430] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   386.430] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   386.430] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   386.430] (II) AIGLX: Loaded and initialized i965
[   386.430] (II) GLX: Initialized DRI2 GL provider for screen 0
[   386.430] (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
[   386.446] (II) intel(0): Setting screen physical size to 423 x 238
[   386.508] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   386.508] (**) Power Button: Applying InputClass "system-keyboard"
[   386.508] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   386.508] (II) LoadModule: "evdev"
[   386.509] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   386.509] (II) Module evdev: vendor="X.Org Foundation"
[   386.509] 	compiled for 1.14.0, module version = 2.8.0
[   386.509] 	Module class: X.Org XInput Driver
[   386.509] 	ABI class: X.Org XInput driver, version 19.1
[   386.509] (II) Using input driver 'evdev' for 'Power Button'
[   386.509] (**) Power Button: always reports core events
[   386.509] (**) evdev: Power Button: Device: "/dev/input/event4"
[   386.509] (--) evdev: Power Button: Vendor 0 Product 0x1
[   386.509] (--) evdev: Power Button: Found keys
[   386.509] (II) evdev: Power Button: Configuring as keyboard
[   386.509] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[   386.510] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   386.510] (**) Option "xkb_rules" "evdev"
[   386.510] (**) Option "xkb_model" "evdev"
[   386.510] (**) Option "xkb_layout" "de"
[   386.535] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[   386.535] (**) Video Bus: Applying InputClass "system-keyboard"
[   386.535] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   386.535] (II) Using input driver 'evdev' for 'Video Bus'
[   386.535] (**) Video Bus: always reports core events
[   386.535] (**) evdev: Video Bus: Device: "/dev/input/event10"
[   386.535] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   386.535] (--) evdev: Video Bus: Found keys
[   386.535] (II) evdev: Video Bus: Configuring as keyboard
[   386.535] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event10"
[   386.535] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   386.535] (**) Option "xkb_rules" "evdev"
[   386.535] (**) Option "xkb_model" "evdev"
[   386.535] (**) Option "xkb_layout" "de"
[   386.536] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   386.536] (**) Power Button: Applying InputClass "system-keyboard"
[   386.536] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   386.536] (II) Using input driver 'evdev' for 'Power Button'
[   386.536] (**) Power Button: always reports core events
[   386.536] (**) evdev: Power Button: Device: "/dev/input/event3"
[   386.536] (--) evdev: Power Button: Vendor 0 Product 0x1
[   386.536] (--) evdev: Power Button: Found keys
[   386.536] (II) evdev: Power Button: Configuring as keyboard
[   386.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[   386.536] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   386.536] (**) Option "xkb_rules" "evdev"
[   386.536] (**) Option "xkb_model" "evdev"
[   386.536] (**) Option "xkb_layout" "de"
[   386.536] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[   386.536] (II) No input driver specified, ignoring this device.
[   386.536] (II) This device may have been added with another device file.
[   386.537] (II) config/udev: Adding drm device (/dev/dri/card0)
[   386.537] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
[   386.537] (II) No input driver specified, ignoring this device.
[   386.537] (II) This device may have been added with another device file.
[   386.538] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[   386.538] (II) No input driver specified, ignoring this device.
[   386.538] (II) This device may have been added with another device file.
[   386.538] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[   386.538] (II) No input driver specified, ignoring this device.
[   386.538] (II) This device may have been added with another device file.
[   386.539] (II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event8)
[   386.539] (**) Webcam SC-13HDL11624N: Applying InputClass "system-keyboard"
[   386.539] (**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall"
[   386.539] (II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N'
[   386.539] (**) Webcam SC-13HDL11624N: always reports core events
[   386.539] (**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event8"
[   386.539] (--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024
[   386.539] (--) evdev: Webcam SC-13HDL11624N: Found keys
[   386.539] (II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard
[   386.539] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input8/event8"
[   386.539] (II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 9)
[   386.539] (**) Option "xkb_rules" "evdev"
[   386.539] (**) Option "xkb_model" "evdev"
[   386.539] (**) Option "xkb_layout" "de"
[   386.540] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   386.540] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[   386.541] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   386.541] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   386.541] (**) AT Translated Set 2 keyboard: always reports core events
[   386.541] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   386.541] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   386.541] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   386.541] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   386.541] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   386.541] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[   386.541] (**) Option "xkb_rules" "evdev"
[   386.541] (**) Option "xkb_model" "evdev"
[   386.541] (**) Option "xkb_layout" "de"
[   386.542] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[   386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[   386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[   386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[   386.542] (**) ETPS/2 Elantech Touchpad: Applying InputClass "disable clickpad buttons"
[   386.542] (II) LoadModule: "synaptics"
[   386.542] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   386.543] (II) Module synaptics: vendor="X.Org Foundation"
[   386.543] 	compiled for 1.14.1, module version = 1.7.1
[   386.543] 	Module class: X.Org XInput Driver
[   386.543] 	ABI class: X.Org XInput driver, version 19.1
[   386.543] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[   386.543] (**) ETPS/2 Elantech Touchpad: always reports core events
[   386.543] (**) Option "Device" "/dev/input/event9"
[   386.563] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[   386.563] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33)
[   386.563] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32)
[   386.564] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[   386.564] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[   386.564] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[   386.564] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[   386.564] (**) Option "TapButton1" "1"
[   386.564] (**) Option "TapButton2" "2"
[   386.564] (**) Option "TapButton3" "3"
[   386.564] (**) Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
[   386.564] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[   386.564] (**) ETPS/2 Elantech Touchpad: always reports core events
[   386.570] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[   386.570] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
[   386.570] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[   386.571] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[   386.571] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
[   386.571] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[   386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[   386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[   386.571] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[   386.571] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[   386.572] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[   386.572] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[   386.573] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[   386.573] (II) No input driver specified, ignoring this device.
[   386.573] (II) This device may have been added with another device file.
[   386.899] (II) intel(0): EDID vendor "SEC", prod id 13638
[   386.899] (II) intel(0): Printing DDC gathered Modelines:
[   386.899] (II) intel(0): Modeline "1600x900"x0.0  100.40  1600 1648 1680 1792  900 902 907 932 -hsync -vsync (56.0 kHz eP)
[   387.041] (II) intel(0): EDID vendor "SEC", prod id 13638
[   387.041] (II) intel(0): Printing DDC gathered Modelines:
[   387.041] (II) intel(0): Modeline "1600x900"x0.0  100.40  1600 1648 1680 1792  900 902 907 932 -hsync -vsync (56.0 kHz eP)
[   387.069] (II) intel(0): EDID vendor "SEC", prod id 13638
[   387.069] (II) intel(0): Printing DDC gathered Modelines:
[   387.069] (II) intel(0): Modeline "1600x900"x0.0  100.40  1600 1648 1680 1792  900 902 907 932 -hsync -vsync (56.0 kHz eP)
[   389.740] (II) AIGLX: Suspending AIGLX clients for VT switch
[   391.348] (II) AIGLX: Resuming AIGLX clients after VT switch
[   391.348] (II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
[   391.367] (II) intel(0): EDID vendor "SEC", prod id 13638
[   391.367] (II) intel(0): Printing DDC gathered Modelines:
[   391.367] (II) intel(0): Modeline "1600x900"x0.0  100.40  1600 1648 1680 1792  900 902 907 932 -hsync -vsync (56.0 kHz eP)
[   391.369] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[   397.614] (II) AIGLX: Suspending AIGLX clients for VT switch

and
/var/log/gdm/:0.log

X.Org X Server 1.14.1
Release Date: 2013-04-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.8.7-1-ARCH x86_64 
Current Operating System: Linux rolfgang 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
Kernel command line: cryptdevice=/dev/sda2:main root=/dev/mapper/main-root lang=de locale=de_DE.UTF-8 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux 
Build Date: 17 April 2013  02:37:06PM
 
Current version of pixman: 0.30.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun  9 00:18:24 2013
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
(**) |   |-->Device "Intel Graphics"
(==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) config/udev: Adding drm device (/dev/dri/card0)
(--) PCI:*(0:0:2:0) 8086:0166:144d:c0d3 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.14.1, module version = 1.0.0
(==) AIGLX enabled
Loading extension GLX
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.14.1, module version = 2.21.9
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
	Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
	Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
	Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
	HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT3),
	Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
	Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
	HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
	Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
	Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
	Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
	HD Graphics 4600, Iris(TM) Pro Graphics 5200,
	Haswell CRW Server (GT1), Haswell CRW Server (GT2),
	Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
	Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
	Iris(TM) Pro Graphics 5200, ValleyView PO board
(++) using VT number 1

(II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
(--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
(**) intel(0): Framebuffer tiled
(**) intel(0): Pixmaps tiled
(**) intel(0): "Tear free" disabled
(**) intel(0): Forcing per-crtc-pixmaps? no
(II) intel(0): Output eDP1 has no monitor section
(--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): EDID for output eDP1
(II) intel(0): Manufacturer: SEC  Model: 3546  Serial#: 0
(II) intel(0): Year: 2011  Week: 0
(II) intel(0): EDID Version: 1.4
(II) intel(0): Digital Display Input
(II) intel(0): 8 bits per channel
(II) intel(0): Digital interface is DisplayPort
(II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 16
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): Preferred mode is native pixel format and refresh rate
(II) intel(0): redX: 0.590 redY: 0.340   greenX: 0.330 greenY: 0.540
(II) intel(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 100.4 MHz   Image Size:  293 x 165 mm
(II) intel(0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1792 h_border: 0
(II) intel(0): v_active: 900  v_sync: 902  v_sync_end 907 v_blanking: 932 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0):  SAMSUNG
(II) intel(0):  LSN133KL018
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff004ca3463500000000
(II) intel(0): 	00150104a51d10780209e59757548a27
(II) intel(0): 	22505400000001010101010101010101
(II) intel(0): 	010101010101382740c0608420303020
(II) intel(0): 	250025a5100000190000000f00000000
(II) intel(0): 	000000000028800a1e00000000fe0053
(II) intel(0): 	414d53554e470a2020202020000000fe
(II) intel(0): 	004c534e3133334b4c3031380a200003
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output eDP1
(II) intel(0): Modeline "1600x900"x60.1  100.40  1600 1648 1680 1792  900 902 907 932 -hsync -vsync (56.0 kHz eP)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): Output eDP1 connected
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output eDP1 using initial mode 1600x900
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): DPI set to (96, 96)
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): HW Cursor enabled
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(II) intel(0): [DRI2] Setup complete
(II) intel(0): [DRI2]   DRI driver: i965
(II) intel(0): direct rendering: DRI2 Enabled
(==) intel(0): hotplug detection: "enabled"
(--) RandR disabled
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_INTEL_swap_event
(II) AIGLX: enabled GLX_ARB_create_context
(II) AIGLX: enabled GLX_ARB_create_context_profile
(II) AIGLX: enabled GLX_EXT_create_context_es2_profile
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized i965
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
(II) intel(0): Setting screen physical size to 423 x 238
(II) config/udev: Adding input device Power Button (/dev/input/event4)
(**) Power Button: Applying InputClass "system-keyboard"
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.14.0, module version = 2.8.0
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event4"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) config/udev: Adding input device Video Bus (/dev/input/event10)
(**) Video Bus: Applying InputClass "system-keyboard"
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Video Bus'
(**) Video Bus: always reports core events
(**) evdev: Video Bus: Device: "/dev/input/event10"
(--) evdev: Video Bus: Vendor 0 Product 0x6
(--) evdev: Video Bus: Found keys
(II) evdev: Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "system-keyboard"
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event3"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
(II) config/udev: Adding input device Lid Switch (/dev/input/event2)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Webcam SC-13HDL11624N (/dev/input/event8)
(**) Webcam SC-13HDL11624N: Applying InputClass "system-keyboard"
(**) Webcam SC-13HDL11624N: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Webcam SC-13HDL11624N'
(**) Webcam SC-13HDL11624N: always reports core events
(**) evdev: Webcam SC-13HDL11624N: Device: "/dev/input/event8"
(--) evdev: Webcam SC-13HDL11624N: Vendor 0x2232 Product 0x1024
(--) evdev: Webcam SC-13HDL11624N: Found keys
(II) evdev: Webcam SC-13HDL11624N: Configuring as keyboard
(II) XINPUT: Adding extended input device "Webcam SC-13HDL11624N" (type: KEYBOARD, id 9)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
(**) AT Translated Set 2 keyboard: always reports core events
(**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
(--) evdev: AT Translated Set 2 keyboard: Found keys
(II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
(**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
(**) ETPS/2 Elantech Touchpad: Applying InputClass "disable clickpad buttons"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.14.1, module version = 1.7.1
(II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
(--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2964 (res 33)
(--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1872 (res 32)
(--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
(--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
(--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
(--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(**) ETPS/2 Elantech Touchpad: always reports core events
(II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 11)
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
(**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.057
(**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
(**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
(**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
(II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
(**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
(II) config/udev: Adding input device PC Speaker (/dev/input/event1)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0  100.40  1600 1648 1680 1792  900 902 907 932 -hsync -vsync (56.0 kHz eP)
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0  100.40  1600 1648 1680 1792  900 902 907 932 -hsync -vsync (56.0 kHz eP)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0  100.40  1600 1648 1680 1792  900 902 907 932 -hsync -vsync (56.0 kHz eP)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): switch to mode 1600x900 on pipe 0 using eDP1
(II) intel(0): EDID vendor "SEC", prod id 13638
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x900"x0.0  100.40  1600 1648 1680 1792  900 902 907 932 -hsync -vsync (56.0 kHz eP)
(--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(II) AIGLX: Suspending AIGLX clients for VT switch

Last edited by Duxon (2013-06-15 16:17:35)

Offline

#2 2013-06-10 09:26:21

rzulu
Member
Registered: 2011-04-22
Posts: 6

Re: [SOLVED] After upgrade gdm and Gnome don't work.

i have the same problem.

Offline

#3 2013-06-15 16:16:54

Duxon
Member
Registered: 2010-12-01
Posts: 41

Re: [SOLVED] After upgrade gdm and Gnome don't work.

Finally managed fixed it.

libcanberra-pulse from [extra] was broken. I reinstalled it with --force.
Likely that came with the recent pulseaudio upgrade.

Offline

Board footer

Powered by FluxBB