You are not logged in.
Hello i'm trying to use gnome but gnome dont wanna work with me
.
I was trying to save xorg from nvidia settings as root or was trying to edit it manualy (as root ofc) but still after reboot computer, xorg.conf dont work and i have to make setup of my monitors again and again whole time. How i can save xorg.conf and run it correct iwhen my gnome starting ?
Last edited by McQueenNewbie (2013-06-09 17:51:28)
Offline
It would be helpful for Others if you could be a bit more precise. "Gnome don't works" is a bit too generic. What exactly is not working? What errors do you get? What are your system-details?
Offline
well i didnt say gone dont works, i explain what is my problem i'm using arch64 with gnome 3 and i cant save and execute xorg on gnome start, every time i need to go nvidia settings and change my xorg file manualy, but still cant save it permanently
Offline
Any ideas ?
Offline
If you have xorg-xinit installed, try to look at your setup by editing /etc/X11/xorg.conf from a terminal and launching X (startx) from a terminal.
This way your X will be set up and normally your Desktop Envirronment should follow.
No haste, go step by step.
“The future has already arrived. It's just not evenly distributed yet.”
― William Gibson
Offline
ok what i made
systemctl disable gdm
reboot
nano /etc/X11/xorg.conf
startxnothing change
Last edited by McQueenNewbie (2013-06-10 14:06:59)
Offline
could you post something from your xorg.conf / xorg.conf.d/... files?
“The future has already arrived. It's just not evenly distributed yet.”
― William Gibson
Offline
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 319.23 (buildmeister@swio-display-x86-rhel47-11) Thu May 16 20:17:05 PDT 2013
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 450"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-1"
Option "metamodes" "CRT: 1024x768_85 +1920+0, DFP: 1920x1080_60 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSectionOffline